/* Needed for the definition of va_list */
-
-/*
-** Make sure we can call this stuff from C++.
-*/
-#if 0
-extern "C" {
-#endif
-
-
-/*
-** Provide the ability to override linkage features of the interface.
-*/
-#ifndef SQLITE_EXTERN
-# define SQLITE_EXTERN extern
-#endif
-#ifndef SQLITE_API
-# define SQLITE_API
-#endif
-#ifndef SQLITE_CDECL
-# define SQLITE_CDECL
-#endif
-#ifndef SQLITE_STDCALL
-# define SQLITE_STDCALL
-#endif
-
-/*
-** These no-op macros are used in front of interfaces to mark those
-** interfaces as either deprecated or experimental. New applications
-** should not use deprecated interfaces - they are supported for backwards
-** compatibility only. Application writers should be aware that
-** experimental interfaces are subject to change in point releases.
-**
-** These macros used to resolve to various kinds of compiler magic that
-** would generate warning messages when they were used. But that
-** compiler magic ended up generating such a flurry of bug reports
-** that we have taken it all out and gone back to using simple
-** noop macros.
-*/
-#define SQLITE_DEPRECATED
-#define SQLITE_EXPERIMENTAL
-
-/*
-** Ensure these symbols were not defined by some previous header file.
-*/
-#ifdef SQLITE_VERSION
-# undef SQLITE_VERSION
-#endif
-#ifdef SQLITE_VERSION_NUMBER
-# undef SQLITE_VERSION_NUMBER
-#endif
-
-/*
-** CAPI3REF: Compile-Time Library Version Numbers
-**
-** ^(The [SQLITE_VERSION] C preprocessor macro in the sqlite3.h header
-** evaluates to a string literal that is the SQLite version in the
-** format "X.Y.Z" where X is the major version number (always 3 for
-** SQLite3) and Y is the minor version number and Z is the release number.)^
-** ^(The [SQLITE_VERSION_NUMBER] C preprocessor macro resolves to an integer
-** with the value (X*1000000 + Y*1000 + Z) where X, Y, and Z are the same
-** numbers used in [SQLITE_VERSION].)^
-** The SQLITE_VERSION_NUMBER for any given release of SQLite will also
-** be larger than the release from which it is derived. Either Y will
-** be held constant and Z will be incremented or else Y will be incremented
-** and Z will be reset to zero.
-**
-** Since version 3.6.18, SQLite source code has been stored in the
-** Fossil configuration management
-** system. ^The SQLITE_SOURCE_ID macro evaluates to
-** a string which identifies a particular check-in of SQLite
-** within its configuration management system. ^The SQLITE_SOURCE_ID
-** string contains the date and time of the check-in (UTC) and an SHA1
-** hash of the entire source tree.
-**
-** See also: [sqlite3_libversion()],
-** [sqlite3_libversion_number()], [sqlite3_sourceid()],
-** [sqlite_version()] and [sqlite_source_id()].
-*/
-#define SQLITE_VERSION "3.13.0"
-#define SQLITE_VERSION_NUMBER 3013000
-#define SQLITE_SOURCE_ID "2016-05-18 10:57:30 fc49f556e48970561d7ab6a2f24fdd7d9eb81ff2"
-
-/*
-** CAPI3REF: Run-Time Library Version Numbers
-** KEYWORDS: sqlite3_version, sqlite3_sourceid
-**
-** These interfaces provide the same information as the [SQLITE_VERSION],
-** [SQLITE_VERSION_NUMBER], and [SQLITE_SOURCE_ID] C preprocessor macros
-** but are associated with the library instead of the header file. ^(Cautious
-** programmers might include assert() statements in their application to
-** verify that values returned by these interfaces match the macros in
-** the header, and thus ensure that the application is
-** compiled with matching library and header files.
-**
-**
-** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER );
-** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 );
-** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 );
-**
)^
-**
-** ^The sqlite3_version[] string constant contains the text of [SQLITE_VERSION]
-** macro. ^The sqlite3_libversion() function returns a pointer to the
-** to the sqlite3_version[] string constant. The sqlite3_libversion()
-** function is provided for use in DLLs since DLL users usually do not have
-** direct access to string constants within the DLL. ^The
-** sqlite3_libversion_number() function returns an integer equal to
-** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns
-** a pointer to a string constant whose value is the same as the
-** [SQLITE_SOURCE_ID] C preprocessor macro.
-**
-** See also: [sqlite_version()] and [sqlite_source_id()].
-*/
-SQLITE_API const char sqlite3_version[] = SQLITE_VERSION;
-SQLITE_API const char *SQLITE_STDCALL sqlite3_libversion(void);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sourceid(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_libversion_number(void);
-
-/*
-** CAPI3REF: Run-Time Library Compilation Options Diagnostics
-**
-** ^The sqlite3_compileoption_used() function returns 0 or 1
-** indicating whether the specified option was defined at
-** compile time. ^The SQLITE_ prefix may be omitted from the
-** option name passed to sqlite3_compileoption_used().
-**
-** ^The sqlite3_compileoption_get() function allows iterating
-** over the list of options that were defined at compile time by
-** returning the N-th compile time option string. ^If N is out of range,
-** sqlite3_compileoption_get() returns a NULL pointer. ^The SQLITE_
-** prefix is omitted from any strings returned by
-** sqlite3_compileoption_get().
-**
-** ^Support for the diagnostic functions sqlite3_compileoption_used()
-** and sqlite3_compileoption_get() may be omitted by specifying the
-** [SQLITE_OMIT_COMPILEOPTION_DIAGS] option at compile time.
-**
-** See also: SQL functions [sqlite_compileoption_used()] and
-** [sqlite_compileoption_get()] and the [compile_options pragma].
-*/
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_compileoption_get(int N);
-#endif
-
-/*
-** CAPI3REF: Test To See If The Library Is Threadsafe
-**
-** ^The sqlite3_threadsafe() function returns zero if and only if
-** SQLite was compiled with mutexing code omitted due to the
-** [SQLITE_THREADSAFE] compile-time option being set to 0.
-**
-** SQLite can be compiled with or without mutexes. When
-** the [SQLITE_THREADSAFE] C preprocessor macro is 1 or 2, mutexes
-** are enabled and SQLite is threadsafe. When the
-** [SQLITE_THREADSAFE] macro is 0,
-** the mutexes are omitted. Without the mutexes, it is not safe
-** to use SQLite concurrently from more than one thread.
-**
-** Enabling mutexes incurs a measurable performance penalty.
-** So if speed is of utmost importance, it makes sense to disable
-** the mutexes. But for maximum safety, mutexes should be enabled.
-** ^The default behavior is for mutexes to be enabled.
-**
-** This interface can be used by an application to make sure that the
-** version of SQLite that it is linking against was compiled with
-** the desired setting of the [SQLITE_THREADSAFE] macro.
-**
-** This interface only reports on the compile-time mutex setting
-** of the [SQLITE_THREADSAFE] flag. If SQLite is compiled with
-** SQLITE_THREADSAFE=1 or =2 then mutexes are enabled by default but
-** can be fully or partially disabled using a call to [sqlite3_config()]
-** with the verbs [SQLITE_CONFIG_SINGLETHREAD], [SQLITE_CONFIG_MULTITHREAD],
-** or [SQLITE_CONFIG_SERIALIZED]. ^(The return value of the
-** sqlite3_threadsafe() function shows only the compile-time setting of
-** thread safety, not any run-time changes to that setting made by
-** sqlite3_config(). In other words, the return value from sqlite3_threadsafe()
-** is unchanged by calls to sqlite3_config().)^
-**
-** See the [threading mode] documentation for additional information.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_threadsafe(void);
-
-/*
-** CAPI3REF: Database Connection Handle
-** KEYWORDS: {database connection} {database connections}
-**
-** Each open SQLite database is represented by a pointer to an instance of
-** the opaque structure named "sqlite3". It is useful to think of an sqlite3
-** pointer as an object. The [sqlite3_open()], [sqlite3_open16()], and
-** [sqlite3_open_v2()] interfaces are its constructors, and [sqlite3_close()]
-** and [sqlite3_close_v2()] are its destructors. There are many other
-** interfaces (such as
-** [sqlite3_prepare_v2()], [sqlite3_create_function()], and
-** [sqlite3_busy_timeout()] to name but three) that are methods on an
-** sqlite3 object.
-*/
-typedef struct sqlite3 sqlite3;
-
-/*
-** CAPI3REF: 64-Bit Integer Types
-** KEYWORDS: sqlite_int64 sqlite_uint64
-**
-** Because there is no cross-platform way to specify 64-bit integer types
-** SQLite includes typedefs for 64-bit signed and unsigned integers.
-**
-** The sqlite3_int64 and sqlite3_uint64 are the preferred type definitions.
-** The sqlite_int64 and sqlite_uint64 types are supported for backwards
-** compatibility only.
-**
-** ^The sqlite3_int64 and sqlite_int64 types can store integer values
-** between -9223372036854775808 and +9223372036854775807 inclusive. ^The
-** sqlite3_uint64 and sqlite_uint64 types can store integer values
-** between 0 and +18446744073709551615 inclusive.
-*/
-#ifdef SQLITE_INT64_TYPE
- typedef SQLITE_INT64_TYPE sqlite_int64;
- typedef unsigned SQLITE_INT64_TYPE sqlite_uint64;
-#elif defined(_MSC_VER) || defined(__BORLANDC__)
- typedef __int64 sqlite_int64;
- typedef unsigned __int64 sqlite_uint64;
-#else
- typedef long long int sqlite_int64;
- typedef unsigned long long int sqlite_uint64;
-#endif
-typedef sqlite_int64 sqlite3_int64;
-typedef sqlite_uint64 sqlite3_uint64;
-
-/*
-** If compiling for a processor that lacks floating point support,
-** substitute integer for floating-point.
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# define double sqlite3_int64
-#endif
-
-/*
-** CAPI3REF: Closing A Database Connection
-** DESTRUCTOR: sqlite3
-**
-** ^The sqlite3_close() and sqlite3_close_v2() routines are destructors
-** for the [sqlite3] object.
-** ^Calls to sqlite3_close() and sqlite3_close_v2() return [SQLITE_OK] if
-** the [sqlite3] object is successfully destroyed and all associated
-** resources are deallocated.
-**
-** ^If the database connection is associated with unfinalized prepared
-** statements or unfinished sqlite3_backup objects then sqlite3_close()
-** will leave the database connection open and return [SQLITE_BUSY].
-** ^If sqlite3_close_v2() is called with unfinalized prepared statements
-** and/or unfinished sqlite3_backups, then the database connection becomes
-** an unusable "zombie" which will automatically be deallocated when the
-** last prepared statement is finalized or the last sqlite3_backup is
-** finished. The sqlite3_close_v2() interface is intended for use with
-** host languages that are garbage collected, and where the order in which
-** destructors are called is arbitrary.
-**
-** Applications should [sqlite3_finalize | finalize] all [prepared statements],
-** [sqlite3_blob_close | close] all [BLOB handles], and
-** [sqlite3_backup_finish | finish] all [sqlite3_backup] objects associated
-** with the [sqlite3] object prior to attempting to close the object. ^If
-** sqlite3_close_v2() is called on a [database connection] that still has
-** outstanding [prepared statements], [BLOB handles], and/or
-** [sqlite3_backup] objects then it returns [SQLITE_OK] and the deallocation
-** of resources is deferred until all [prepared statements], [BLOB handles],
-** and [sqlite3_backup] objects are also destroyed.
-**
-** ^If an [sqlite3] object is destroyed while a transaction is open,
-** the transaction is automatically rolled back.
-**
-** The C parameter to [sqlite3_close(C)] and [sqlite3_close_v2(C)]
-** must be either a NULL
-** pointer or an [sqlite3] object pointer obtained
-** from [sqlite3_open()], [sqlite3_open16()], or
-** [sqlite3_open_v2()], and not previously closed.
-** ^Calling sqlite3_close() or sqlite3_close_v2() with a NULL pointer
-** argument is a harmless no-op.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_close(sqlite3*);
-SQLITE_API int SQLITE_STDCALL sqlite3_close_v2(sqlite3*);
-
-/*
-** The type for a callback function.
-** This is legacy and deprecated. It is included for historical
-** compatibility and is not documented.
-*/
-typedef int (*sqlite3_callback)(void*,int,char**, char**);
-
-/*
-** CAPI3REF: One-Step Query Execution Interface
-** METHOD: sqlite3
-**
-** The sqlite3_exec() interface is a convenience wrapper around
-** [sqlite3_prepare_v2()], [sqlite3_step()], and [sqlite3_finalize()],
-** that allows an application to run multiple statements of SQL
-** without having to use a lot of C code.
-**
-** ^The sqlite3_exec() interface runs zero or more UTF-8 encoded,
-** semicolon-separate SQL statements passed into its 2nd argument,
-** in the context of the [database connection] passed in as its 1st
-** argument. ^If the callback function of the 3rd argument to
-** sqlite3_exec() is not NULL, then it is invoked for each result row
-** coming out of the evaluated SQL statements. ^The 4th argument to
-** sqlite3_exec() is relayed through to the 1st argument of each
-** callback invocation. ^If the callback pointer to sqlite3_exec()
-** is NULL, then no callback is ever invoked and result rows are
-** ignored.
-**
-** ^If an error occurs while evaluating the SQL statements passed into
-** sqlite3_exec(), then execution of the current statement stops and
-** subsequent statements are skipped. ^If the 5th parameter to sqlite3_exec()
-** is not NULL then any error message is written into memory obtained
-** from [sqlite3_malloc()] and passed back through the 5th parameter.
-** To avoid memory leaks, the application should invoke [sqlite3_free()]
-** on error message strings returned through the 5th parameter of
-** sqlite3_exec() after the error message string is no longer needed.
-** ^If the 5th parameter to sqlite3_exec() is not NULL and no errors
-** occur, then sqlite3_exec() sets the pointer in its 5th parameter to
-** NULL before returning.
-**
-** ^If an sqlite3_exec() callback returns non-zero, the sqlite3_exec()
-** routine returns SQLITE_ABORT without invoking the callback again and
-** without running any subsequent SQL statements.
-**
-** ^The 2nd argument to the sqlite3_exec() callback function is the
-** number of columns in the result. ^The 3rd argument to the sqlite3_exec()
-** callback is an array of pointers to strings obtained as if from
-** [sqlite3_column_text()], one for each column. ^If an element of a
-** result row is NULL then the corresponding string pointer for the
-** sqlite3_exec() callback is a NULL pointer. ^The 4th argument to the
-** sqlite3_exec() callback is an array of pointers to strings where each
-** entry represents the name of corresponding result column as obtained
-** from [sqlite3_column_name()].
-**
-** ^If the 2nd parameter to sqlite3_exec() is a NULL pointer, a pointer
-** to an empty string, or a pointer that contains only whitespace and/or
-** SQL comments, then no SQL statements are evaluated and the database
-** is not changed.
-**
-** Restrictions:
-**
-**
-** - The application must ensure that the 1st parameter to sqlite3_exec()
-** is a valid and open [database connection].
-**
- The application must not close the [database connection] specified by
-** the 1st parameter to sqlite3_exec() while sqlite3_exec() is running.
-**
- The application must not modify the SQL statement text passed into
-** the 2nd parameter of sqlite3_exec() while sqlite3_exec() is running.
-**
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_exec(
- sqlite3*, /* An open database */
- const char *sql, /* SQL to be evaluated */
- int (*callback)(void*,int,char**,char**), /* Callback function */
- void *, /* 1st argument to callback */
- char **errmsg /* Error msg written here */
-);
-
-/*
-** CAPI3REF: Result Codes
-** KEYWORDS: {result code definitions}
-**
-** Many SQLite functions return an integer result code from the set shown
-** here in order to indicate success or failure.
-**
-** New error codes may be added in future versions of SQLite.
-**
-** See also: [extended result code definitions]
-*/
-#define SQLITE_OK 0 /* Successful result */
-/* beginning-of-error-codes */
-#define SQLITE_ERROR 1 /* SQL error or missing database */
-#define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */
-#define SQLITE_PERM 3 /* Access permission denied */
-#define SQLITE_ABORT 4 /* Callback routine requested an abort */
-#define SQLITE_BUSY 5 /* The database file is locked */
-#define SQLITE_LOCKED 6 /* A table in the database is locked */
-#define SQLITE_NOMEM 7 /* A malloc() failed */
-#define SQLITE_READONLY 8 /* Attempt to write a readonly database */
-#define SQLITE_INTERRUPT 9 /* Operation terminated by sqlite3_interrupt()*/
-#define SQLITE_IOERR 10 /* Some kind of disk I/O error occurred */
-#define SQLITE_CORRUPT 11 /* The database disk image is malformed */
-#define SQLITE_NOTFOUND 12 /* Unknown opcode in sqlite3_file_control() */
-#define SQLITE_FULL 13 /* Insertion failed because database is full */
-#define SQLITE_CANTOPEN 14 /* Unable to open the database file */
-#define SQLITE_PROTOCOL 15 /* Database lock protocol error */
-#define SQLITE_EMPTY 16 /* Database is empty */
-#define SQLITE_SCHEMA 17 /* The database schema changed */
-#define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */
-#define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */
-#define SQLITE_MISMATCH 20 /* Data type mismatch */
-#define SQLITE_MISUSE 21 /* Library used incorrectly */
-#define SQLITE_NOLFS 22 /* Uses OS features not supported on host */
-#define SQLITE_AUTH 23 /* Authorization denied */
-#define SQLITE_FORMAT 24 /* Auxiliary database format error */
-#define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */
-#define SQLITE_NOTADB 26 /* File opened that is not a database file */
-#define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */
-#define SQLITE_WARNING 28 /* Warnings from sqlite3_log() */
-#define SQLITE_ROW 100 /* sqlite3_step() has another row ready */
-#define SQLITE_DONE 101 /* sqlite3_step() has finished executing */
-/* end-of-error-codes */
-
-/*
-** CAPI3REF: Extended Result Codes
-** KEYWORDS: {extended result code definitions}
-**
-** In its default configuration, SQLite API routines return one of 30 integer
-** [result codes]. However, experience has shown that many of
-** these result codes are too coarse-grained. They do not provide as
-** much information about problems as programmers might like. In an effort to
-** address this, newer versions of SQLite (version 3.3.8 and later) include
-** support for additional result codes that provide more detailed information
-** about errors. These [extended result codes] are enabled or disabled
-** on a per database connection basis using the
-** [sqlite3_extended_result_codes()] API. Or, the extended code for
-** the most recent error can be obtained using
-** [sqlite3_extended_errcode()].
-*/
-#define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8))
-#define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8))
-#define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8))
-#define SQLITE_IOERR_FSYNC (SQLITE_IOERR | (4<<8))
-#define SQLITE_IOERR_DIR_FSYNC (SQLITE_IOERR | (5<<8))
-#define SQLITE_IOERR_TRUNCATE (SQLITE_IOERR | (6<<8))
-#define SQLITE_IOERR_FSTAT (SQLITE_IOERR | (7<<8))
-#define SQLITE_IOERR_UNLOCK (SQLITE_IOERR | (8<<8))
-#define SQLITE_IOERR_RDLOCK (SQLITE_IOERR | (9<<8))
-#define SQLITE_IOERR_DELETE (SQLITE_IOERR | (10<<8))
-#define SQLITE_IOERR_BLOCKED (SQLITE_IOERR | (11<<8))
-#define SQLITE_IOERR_NOMEM (SQLITE_IOERR | (12<<8))
-#define SQLITE_IOERR_ACCESS (SQLITE_IOERR | (13<<8))
-#define SQLITE_IOERR_CHECKRESERVEDLOCK (SQLITE_IOERR | (14<<8))
-#define SQLITE_IOERR_LOCK (SQLITE_IOERR | (15<<8))
-#define SQLITE_IOERR_CLOSE (SQLITE_IOERR | (16<<8))
-#define SQLITE_IOERR_DIR_CLOSE (SQLITE_IOERR | (17<<8))
-#define SQLITE_IOERR_SHMOPEN (SQLITE_IOERR | (18<<8))
-#define SQLITE_IOERR_SHMSIZE (SQLITE_IOERR | (19<<8))
-#define SQLITE_IOERR_SHMLOCK (SQLITE_IOERR | (20<<8))
-#define SQLITE_IOERR_SHMMAP (SQLITE_IOERR | (21<<8))
-#define SQLITE_IOERR_SEEK (SQLITE_IOERR | (22<<8))
-#define SQLITE_IOERR_DELETE_NOENT (SQLITE_IOERR | (23<<8))
-#define SQLITE_IOERR_MMAP (SQLITE_IOERR | (24<<8))
-#define SQLITE_IOERR_GETTEMPPATH (SQLITE_IOERR | (25<<8))
-#define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8))
-#define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8))
-#define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8))
-#define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8))
-#define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8))
-#define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8))
-#define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8))
-#define SQLITE_CANTOPEN_ISDIR (SQLITE_CANTOPEN | (2<<8))
-#define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8))
-#define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8))
-#define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8))
-#define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8))
-#define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8))
-#define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8))
-#define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8))
-#define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8))
-#define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8))
-#define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8))
-#define SQLITE_CONSTRAINT_FOREIGNKEY (SQLITE_CONSTRAINT | (3<<8))
-#define SQLITE_CONSTRAINT_FUNCTION (SQLITE_CONSTRAINT | (4<<8))
-#define SQLITE_CONSTRAINT_NOTNULL (SQLITE_CONSTRAINT | (5<<8))
-#define SQLITE_CONSTRAINT_PRIMARYKEY (SQLITE_CONSTRAINT | (6<<8))
-#define SQLITE_CONSTRAINT_TRIGGER (SQLITE_CONSTRAINT | (7<<8))
-#define SQLITE_CONSTRAINT_UNIQUE (SQLITE_CONSTRAINT | (8<<8))
-#define SQLITE_CONSTRAINT_VTAB (SQLITE_CONSTRAINT | (9<<8))
-#define SQLITE_CONSTRAINT_ROWID (SQLITE_CONSTRAINT |(10<<8))
-#define SQLITE_NOTICE_RECOVER_WAL (SQLITE_NOTICE | (1<<8))
-#define SQLITE_NOTICE_RECOVER_ROLLBACK (SQLITE_NOTICE | (2<<8))
-#define SQLITE_WARNING_AUTOINDEX (SQLITE_WARNING | (1<<8))
-#define SQLITE_AUTH_USER (SQLITE_AUTH | (1<<8))
-
-/*
-** CAPI3REF: Flags For File Open Operations
-**
-** These bit values are intended for use in the
-** 3rd parameter to the [sqlite3_open_v2()] interface and
-** in the 4th parameter to the [sqlite3_vfs.xOpen] method.
-*/
-#define SQLITE_OPEN_READONLY 0x00000001 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_READWRITE 0x00000002 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_CREATE 0x00000004 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_DELETEONCLOSE 0x00000008 /* VFS only */
-#define SQLITE_OPEN_EXCLUSIVE 0x00000010 /* VFS only */
-#define SQLITE_OPEN_AUTOPROXY 0x00000020 /* VFS only */
-#define SQLITE_OPEN_URI 0x00000040 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_MEMORY 0x00000080 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_MAIN_DB 0x00000100 /* VFS only */
-#define SQLITE_OPEN_TEMP_DB 0x00000200 /* VFS only */
-#define SQLITE_OPEN_TRANSIENT_DB 0x00000400 /* VFS only */
-#define SQLITE_OPEN_MAIN_JOURNAL 0x00000800 /* VFS only */
-#define SQLITE_OPEN_TEMP_JOURNAL 0x00001000 /* VFS only */
-#define SQLITE_OPEN_SUBJOURNAL 0x00002000 /* VFS only */
-#define SQLITE_OPEN_MASTER_JOURNAL 0x00004000 /* VFS only */
-#define SQLITE_OPEN_NOMUTEX 0x00008000 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_FULLMUTEX 0x00010000 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_SHAREDCACHE 0x00020000 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_PRIVATECACHE 0x00040000 /* Ok for sqlite3_open_v2() */
-#define SQLITE_OPEN_WAL 0x00080000 /* VFS only */
-
-/* Reserved: 0x00F00000 */
-
-/*
-** CAPI3REF: Device Characteristics
-**
-** The xDeviceCharacteristics method of the [sqlite3_io_methods]
-** object returns an integer which is a vector of these
-** bit values expressing I/O characteristics of the mass storage
-** device that holds the file that the [sqlite3_io_methods]
-** refers to.
-**
-** The SQLITE_IOCAP_ATOMIC property means that all writes of
-** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
-** mean that writes of blocks that are nnn bytes in size and
-** are aligned to an address which is an integer multiple of
-** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
-** that when data is appended to a file, the data is appended
-** first then the size of the file is extended, never the other
-** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
-** information is written to disk in the same order as calls
-** to xWrite(). The SQLITE_IOCAP_POWERSAFE_OVERWRITE property means that
-** after reboot following a crash or power loss, the only bytes in a
-** file that were written at the application level might have changed
-** and that adjacent bytes, even bytes within the same sector are
-** guaranteed to be unchanged. The SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN
-** flag indicate that a file cannot be deleted when open. The
-** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on
-** read-only media and cannot be changed even by processes with
-** elevated privileges.
-*/
-#define SQLITE_IOCAP_ATOMIC 0x00000001
-#define SQLITE_IOCAP_ATOMIC512 0x00000002
-#define SQLITE_IOCAP_ATOMIC1K 0x00000004
-#define SQLITE_IOCAP_ATOMIC2K 0x00000008
-#define SQLITE_IOCAP_ATOMIC4K 0x00000010
-#define SQLITE_IOCAP_ATOMIC8K 0x00000020
-#define SQLITE_IOCAP_ATOMIC16K 0x00000040
-#define SQLITE_IOCAP_ATOMIC32K 0x00000080
-#define SQLITE_IOCAP_ATOMIC64K 0x00000100
-#define SQLITE_IOCAP_SAFE_APPEND 0x00000200
-#define SQLITE_IOCAP_SEQUENTIAL 0x00000400
-#define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800
-#define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000
-#define SQLITE_IOCAP_IMMUTABLE 0x00002000
-
-/*
-** CAPI3REF: File Locking Levels
-**
-** SQLite uses one of these integer values as the second
-** argument to calls it makes to the xLock() and xUnlock() methods
-** of an [sqlite3_io_methods] object.
-*/
-#define SQLITE_LOCK_NONE 0
-#define SQLITE_LOCK_SHARED 1
-#define SQLITE_LOCK_RESERVED 2
-#define SQLITE_LOCK_PENDING 3
-#define SQLITE_LOCK_EXCLUSIVE 4
-
-/*
-** CAPI3REF: Synchronization Type Flags
-**
-** When SQLite invokes the xSync() method of an
-** [sqlite3_io_methods] object it uses a combination of
-** these integer values as the second argument.
-**
-** When the SQLITE_SYNC_DATAONLY flag is used, it means that the
-** sync operation only needs to flush data to mass storage. Inode
-** information need not be flushed. If the lower four bits of the flag
-** equal SQLITE_SYNC_NORMAL, that means to use normal fsync() semantics.
-** If the lower four bits equal SQLITE_SYNC_FULL, that means
-** to use Mac OS X style fullsync instead of fsync().
-**
-** Do not confuse the SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags
-** with the [PRAGMA synchronous]=NORMAL and [PRAGMA synchronous]=FULL
-** settings. The [synchronous pragma] determines when calls to the
-** xSync VFS method occur and applies uniformly across all platforms.
-** The SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL flags determine how
-** energetic or rigorous or forceful the sync operations are and
-** only make a difference on Mac OSX for the default SQLite code.
-** (Third-party VFS implementations might also make the distinction
-** between SQLITE_SYNC_NORMAL and SQLITE_SYNC_FULL, but among the
-** operating systems natively supported by SQLite, only Mac OSX
-** cares about the difference.)
-*/
-#define SQLITE_SYNC_NORMAL 0x00002
-#define SQLITE_SYNC_FULL 0x00003
-#define SQLITE_SYNC_DATAONLY 0x00010
-
-/*
-** CAPI3REF: OS Interface Open File Handle
-**
-** An [sqlite3_file] object represents an open file in the
-** [sqlite3_vfs | OS interface layer]. Individual OS interface
-** implementations will
-** want to subclass this object by appending additional fields
-** for their own use. The pMethods entry is a pointer to an
-** [sqlite3_io_methods] object that defines methods for performing
-** I/O operations on the open file.
-*/
-typedef struct sqlite3_file sqlite3_file;
-struct sqlite3_file {
- const struct sqlite3_io_methods *pMethods; /* Methods for an open file */
-};
-
-/*
-** CAPI3REF: OS Interface File Virtual Methods Object
-**
-** Every file opened by the [sqlite3_vfs.xOpen] method populates an
-** [sqlite3_file] object (or, more commonly, a subclass of the
-** [sqlite3_file] object) with a pointer to an instance of this object.
-** This object defines the methods used to perform various operations
-** against the open file represented by the [sqlite3_file] object.
-**
-** If the [sqlite3_vfs.xOpen] method sets the sqlite3_file.pMethods element
-** to a non-NULL pointer, then the sqlite3_io_methods.xClose method
-** may be invoked even if the [sqlite3_vfs.xOpen] reported that it failed. The
-** only way to prevent a call to xClose following a failed [sqlite3_vfs.xOpen]
-** is for the [sqlite3_vfs.xOpen] to set the sqlite3_file.pMethods element
-** to NULL.
-**
-** The flags argument to xSync may be one of [SQLITE_SYNC_NORMAL] or
-** [SQLITE_SYNC_FULL]. The first choice is the normal fsync().
-** The second choice is a Mac OS X style fullsync. The [SQLITE_SYNC_DATAONLY]
-** flag may be ORed in to indicate that only the data of the file
-** and not its inode needs to be synced.
-**
-** The integer values to xLock() and xUnlock() are one of
-**
-** - [SQLITE_LOCK_NONE],
-**
- [SQLITE_LOCK_SHARED],
-**
- [SQLITE_LOCK_RESERVED],
-**
- [SQLITE_LOCK_PENDING], or
-**
- [SQLITE_LOCK_EXCLUSIVE].
-**
-** xLock() increases the lock. xUnlock() decreases the lock.
-** The xCheckReservedLock() method checks whether any database connection,
-** either in this process or in some other process, is holding a RESERVED,
-** PENDING, or EXCLUSIVE lock on the file. It returns true
-** if such a lock exists and false otherwise.
-**
-** The xFileControl() method is a generic interface that allows custom
-** VFS implementations to directly control an open file using the
-** [sqlite3_file_control()] interface. The second "op" argument is an
-** integer opcode. The third argument is a generic pointer intended to
-** point to a structure that may contain arguments or space in which to
-** write return values. Potential uses for xFileControl() might be
-** functions to enable blocking locks with timeouts, to change the
-** locking strategy (for example to use dot-file locks), to inquire
-** about the status of a lock, or to break stale locks. The SQLite
-** core reserves all opcodes less than 100 for its own use.
-** A [file control opcodes | list of opcodes] less than 100 is available.
-** Applications that define a custom xFileControl method should use opcodes
-** greater than 100 to avoid conflicts. VFS implementations should
-** return [SQLITE_NOTFOUND] for file control opcodes that they do not
-** recognize.
-**
-** The xSectorSize() method returns the sector size of the
-** device that underlies the file. The sector size is the
-** minimum write that can be performed without disturbing
-** other bytes in the file. The xDeviceCharacteristics()
-** method returns a bit vector describing behaviors of the
-** underlying device:
-**
-**
-** - [SQLITE_IOCAP_ATOMIC]
-**
- [SQLITE_IOCAP_ATOMIC512]
-**
- [SQLITE_IOCAP_ATOMIC1K]
-**
- [SQLITE_IOCAP_ATOMIC2K]
-**
- [SQLITE_IOCAP_ATOMIC4K]
-**
- [SQLITE_IOCAP_ATOMIC8K]
-**
- [SQLITE_IOCAP_ATOMIC16K]
-**
- [SQLITE_IOCAP_ATOMIC32K]
-**
- [SQLITE_IOCAP_ATOMIC64K]
-**
- [SQLITE_IOCAP_SAFE_APPEND]
-**
- [SQLITE_IOCAP_SEQUENTIAL]
-**
-**
-** The SQLITE_IOCAP_ATOMIC property means that all writes of
-** any size are atomic. The SQLITE_IOCAP_ATOMICnnn values
-** mean that writes of blocks that are nnn bytes in size and
-** are aligned to an address which is an integer multiple of
-** nnn are atomic. The SQLITE_IOCAP_SAFE_APPEND value means
-** that when data is appended to a file, the data is appended
-** first then the size of the file is extended, never the other
-** way around. The SQLITE_IOCAP_SEQUENTIAL property means that
-** information is written to disk in the same order as calls
-** to xWrite().
-**
-** If xRead() returns SQLITE_IOERR_SHORT_READ it must also fill
-** in the unread portions of the buffer with zeros. A VFS that
-** fails to zero-fill short reads might seem to work. However,
-** failure to zero-fill short reads will eventually lead to
-** database corruption.
-*/
-typedef struct sqlite3_io_methods sqlite3_io_methods;
-struct sqlite3_io_methods {
- int iVersion;
- int (*xClose)(sqlite3_file*);
- int (*xRead)(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst);
- int (*xWrite)(sqlite3_file*, const void*, int iAmt, sqlite3_int64 iOfst);
- int (*xTruncate)(sqlite3_file*, sqlite3_int64 size);
- int (*xSync)(sqlite3_file*, int flags);
- int (*xFileSize)(sqlite3_file*, sqlite3_int64 *pSize);
- int (*xLock)(sqlite3_file*, int);
- int (*xUnlock)(sqlite3_file*, int);
- int (*xCheckReservedLock)(sqlite3_file*, int *pResOut);
- int (*xFileControl)(sqlite3_file*, int op, void *pArg);
- int (*xSectorSize)(sqlite3_file*);
- int (*xDeviceCharacteristics)(sqlite3_file*);
- /* Methods above are valid for version 1 */
- int (*xShmMap)(sqlite3_file*, int iPg, int pgsz, int, void volatile**);
- int (*xShmLock)(sqlite3_file*, int offset, int n, int flags);
- void (*xShmBarrier)(sqlite3_file*);
- int (*xShmUnmap)(sqlite3_file*, int deleteFlag);
- /* Methods above are valid for version 2 */
- int (*xFetch)(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp);
- int (*xUnfetch)(sqlite3_file*, sqlite3_int64 iOfst, void *p);
- /* Methods above are valid for version 3 */
- /* Additional methods may be added in future releases */
-};
-
-/*
-** CAPI3REF: Standard File Control Opcodes
-** KEYWORDS: {file control opcodes} {file control opcode}
-**
-** These integer constants are opcodes for the xFileControl method
-** of the [sqlite3_io_methods] object and for the [sqlite3_file_control()]
-** interface.
-**
-**
-** - [[SQLITE_FCNTL_LOCKSTATE]]
-** The [SQLITE_FCNTL_LOCKSTATE] opcode is used for debugging. This
-** opcode causes the xFileControl method to write the current state of
-** the lock (one of [SQLITE_LOCK_NONE], [SQLITE_LOCK_SHARED],
-** [SQLITE_LOCK_RESERVED], [SQLITE_LOCK_PENDING], or [SQLITE_LOCK_EXCLUSIVE])
-** into an integer that the pArg argument points to. This capability
-** is used during testing and is only available when the SQLITE_TEST
-** compile-time option is used.
-**
-**
- [[SQLITE_FCNTL_SIZE_HINT]]
-** The [SQLITE_FCNTL_SIZE_HINT] opcode is used by SQLite to give the VFS
-** layer a hint of how large the database file will grow to be during the
-** current transaction. This hint is not guaranteed to be accurate but it
-** is often close. The underlying VFS might choose to preallocate database
-** file space based on this hint in order to help writes to the database
-** file run faster.
-**
-**
- [[SQLITE_FCNTL_CHUNK_SIZE]]
-** The [SQLITE_FCNTL_CHUNK_SIZE] opcode is used to request that the VFS
-** extends and truncates the database file in chunks of a size specified
-** by the user. The fourth argument to [sqlite3_file_control()] should
-** point to an integer (type int) containing the new chunk-size to use
-** for the nominated database. Allocating database file space in large
-** chunks (say 1MB at a time), may reduce file-system fragmentation and
-** improve performance on some systems.
-**
-**
- [[SQLITE_FCNTL_FILE_POINTER]]
-** The [SQLITE_FCNTL_FILE_POINTER] opcode is used to obtain a pointer
-** to the [sqlite3_file] object associated with a particular database
-** connection. See also [SQLITE_FCNTL_JOURNAL_POINTER].
-**
-**
- [[SQLITE_FCNTL_JOURNAL_POINTER]]
-** The [SQLITE_FCNTL_JOURNAL_POINTER] opcode is used to obtain a pointer
-** to the [sqlite3_file] object associated with the journal file (either
-** the [rollback journal] or the [write-ahead log]) for a particular database
-** connection. See also [SQLITE_FCNTL_FILE_POINTER].
-**
-**
- [[SQLITE_FCNTL_SYNC_OMITTED]]
-** No longer in use.
-**
-**
- [[SQLITE_FCNTL_SYNC]]
-** The [SQLITE_FCNTL_SYNC] opcode is generated internally by SQLite and
-** sent to the VFS immediately before the xSync method is invoked on a
-** database file descriptor. Or, if the xSync method is not invoked
-** because the user has configured SQLite with
-** [PRAGMA synchronous | PRAGMA synchronous=OFF] it is invoked in place
-** of the xSync method. In most cases, the pointer argument passed with
-** this file-control is NULL. However, if the database file is being synced
-** as part of a multi-database commit, the argument points to a nul-terminated
-** string containing the transactions master-journal file name. VFSes that
-** do not need this signal should silently ignore this opcode. Applications
-** should not call [sqlite3_file_control()] with this opcode as doing so may
-** disrupt the operation of the specialized VFSes that do require it.
-**
-**
- [[SQLITE_FCNTL_COMMIT_PHASETWO]]
-** The [SQLITE_FCNTL_COMMIT_PHASETWO] opcode is generated internally by SQLite
-** and sent to the VFS after a transaction has been committed immediately
-** but before the database is unlocked. VFSes that do not need this signal
-** should silently ignore this opcode. Applications should not call
-** [sqlite3_file_control()] with this opcode as doing so may disrupt the
-** operation of the specialized VFSes that do require it.
-**
-**
- [[SQLITE_FCNTL_WIN32_AV_RETRY]]
-** ^The [SQLITE_FCNTL_WIN32_AV_RETRY] opcode is used to configure automatic
-** retry counts and intervals for certain disk I/O operations for the
-** windows [VFS] in order to provide robustness in the presence of
-** anti-virus programs. By default, the windows VFS will retry file read,
-** file write, and file delete operations up to 10 times, with a delay
-** of 25 milliseconds before the first retry and with the delay increasing
-** by an additional 25 milliseconds with each subsequent retry. This
-** opcode allows these two values (10 retries and 25 milliseconds of delay)
-** to be adjusted. The values are changed for all database connections
-** within the same process. The argument is a pointer to an array of two
-** integers where the first integer i the new retry count and the second
-** integer is the delay. If either integer is negative, then the setting
-** is not changed but instead the prior value of that setting is written
-** into the array entry, allowing the current retry settings to be
-** interrogated. The zDbName parameter is ignored.
-**
-**
- [[SQLITE_FCNTL_PERSIST_WAL]]
-** ^The [SQLITE_FCNTL_PERSIST_WAL] opcode is used to set or query the
-** persistent [WAL | Write Ahead Log] setting. By default, the auxiliary
-** write ahead log and shared memory files used for transaction control
-** are automatically deleted when the latest connection to the database
-** closes. Setting persistent WAL mode causes those files to persist after
-** close. Persisting the files is useful when other processes that do not
-** have write permission on the directory containing the database file want
-** to read the database file, as the WAL and shared memory files must exist
-** in order for the database to be readable. The fourth parameter to
-** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
-** That integer is 0 to disable persistent WAL mode or 1 to enable persistent
-** WAL mode. If the integer is -1, then it is overwritten with the current
-** WAL persistence setting.
-**
-**
- [[SQLITE_FCNTL_POWERSAFE_OVERWRITE]]
-** ^The [SQLITE_FCNTL_POWERSAFE_OVERWRITE] opcode is used to set or query the
-** persistent "powersafe-overwrite" or "PSOW" setting. The PSOW setting
-** determines the [SQLITE_IOCAP_POWERSAFE_OVERWRITE] bit of the
-** xDeviceCharacteristics methods. The fourth parameter to
-** [sqlite3_file_control()] for this opcode should be a pointer to an integer.
-** That integer is 0 to disable zero-damage mode or 1 to enable zero-damage
-** mode. If the integer is -1, then it is overwritten with the current
-** zero-damage mode setting.
-**
-**
- [[SQLITE_FCNTL_OVERWRITE]]
-** ^The [SQLITE_FCNTL_OVERWRITE] opcode is invoked by SQLite after opening
-** a write transaction to indicate that, unless it is rolled back for some
-** reason, the entire database file will be overwritten by the current
-** transaction. This is used by VACUUM operations.
-**
-**
- [[SQLITE_FCNTL_VFSNAME]]
-** ^The [SQLITE_FCNTL_VFSNAME] opcode can be used to obtain the names of
-** all [VFSes] in the VFS stack. The names are of all VFS shims and the
-** final bottom-level VFS are written into memory obtained from
-** [sqlite3_malloc()] and the result is stored in the char* variable
-** that the fourth parameter of [sqlite3_file_control()] points to.
-** The caller is responsible for freeing the memory when done. As with
-** all file-control actions, there is no guarantee that this will actually
-** do anything. Callers should initialize the char* variable to a NULL
-** pointer in case this file-control is not implemented. This file-control
-** is intended for diagnostic use only.
-**
-**
- [[SQLITE_FCNTL_VFS_POINTER]]
-** ^The [SQLITE_FCNTL_VFS_POINTER] opcode finds a pointer to the top-level
-** [VFSes] currently in use. ^(The argument X in
-** sqlite3_file_control(db,SQLITE_FCNTL_VFS_POINTER,X) must be
-** of type "[sqlite3_vfs] **". This opcodes will set *X
-** to a pointer to the top-level VFS.)^
-** ^When there are multiple VFS shims in the stack, this opcode finds the
-** upper-most shim only.
-**
-**
- [[SQLITE_FCNTL_PRAGMA]]
-** ^Whenever a [PRAGMA] statement is parsed, an [SQLITE_FCNTL_PRAGMA]
-** file control is sent to the open [sqlite3_file] object corresponding
-** to the database file to which the pragma statement refers. ^The argument
-** to the [SQLITE_FCNTL_PRAGMA] file control is an array of
-** pointers to strings (char**) in which the second element of the array
-** is the name of the pragma and the third element is the argument to the
-** pragma or NULL if the pragma has no argument. ^The handler for an
-** [SQLITE_FCNTL_PRAGMA] file control can optionally make the first element
-** of the char** argument point to a string obtained from [sqlite3_mprintf()]
-** or the equivalent and that string will become the result of the pragma or
-** the error message if the pragma fails. ^If the
-** [SQLITE_FCNTL_PRAGMA] file control returns [SQLITE_NOTFOUND], then normal
-** [PRAGMA] processing continues. ^If the [SQLITE_FCNTL_PRAGMA]
-** file control returns [SQLITE_OK], then the parser assumes that the
-** VFS has handled the PRAGMA itself and the parser generates a no-op
-** prepared statement if result string is NULL, or that returns a copy
-** of the result string if the string is non-NULL.
-** ^If the [SQLITE_FCNTL_PRAGMA] file control returns
-** any result code other than [SQLITE_OK] or [SQLITE_NOTFOUND], that means
-** that the VFS encountered an error while handling the [PRAGMA] and the
-** compilation of the PRAGMA fails with an error. ^The [SQLITE_FCNTL_PRAGMA]
-** file control occurs at the beginning of pragma statement analysis and so
-** it is able to override built-in [PRAGMA] statements.
-**
-**
- [[SQLITE_FCNTL_BUSYHANDLER]]
-** ^The [SQLITE_FCNTL_BUSYHANDLER]
-** file-control may be invoked by SQLite on the database file handle
-** shortly after it is opened in order to provide a custom VFS with access
-** to the connections busy-handler callback. The argument is of type (void **)
-** - an array of two (void *) values. The first (void *) actually points
-** to a function of type (int (*)(void *)). In order to invoke the connections
-** busy-handler, this function should be invoked with the second (void *) in
-** the array as the only argument. If it returns non-zero, then the operation
-** should be retried. If it returns zero, the custom VFS should abandon the
-** current operation.
-**
-**
- [[SQLITE_FCNTL_TEMPFILENAME]]
-** ^Application can invoke the [SQLITE_FCNTL_TEMPFILENAME] file-control
-** to have SQLite generate a
-** temporary filename using the same algorithm that is followed to generate
-** temporary filenames for TEMP tables and other internal uses. The
-** argument should be a char** which will be filled with the filename
-** written into memory obtained from [sqlite3_malloc()]. The caller should
-** invoke [sqlite3_free()] on the result to avoid a memory leak.
-**
-**
- [[SQLITE_FCNTL_MMAP_SIZE]]
-** The [SQLITE_FCNTL_MMAP_SIZE] file control is used to query or set the
-** maximum number of bytes that will be used for memory-mapped I/O.
-** The argument is a pointer to a value of type sqlite3_int64 that
-** is an advisory maximum number of bytes in the file to memory map. The
-** pointer is overwritten with the old value. The limit is not changed if
-** the value originally pointed to is negative, and so the current limit
-** can be queried by passing in a pointer to a negative number. This
-** file-control is used internally to implement [PRAGMA mmap_size].
-**
-**
- [[SQLITE_FCNTL_TRACE]]
-** The [SQLITE_FCNTL_TRACE] file control provides advisory information
-** to the VFS about what the higher layers of the SQLite stack are doing.
-** This file control is used by some VFS activity tracing [shims].
-** The argument is a zero-terminated string. Higher layers in the
-** SQLite stack may generate instances of this file control if
-** the [SQLITE_USE_FCNTL_TRACE] compile-time option is enabled.
-**
-**
- [[SQLITE_FCNTL_HAS_MOVED]]
-** The [SQLITE_FCNTL_HAS_MOVED] file control interprets its argument as a
-** pointer to an integer and it writes a boolean into that integer depending
-** on whether or not the file has been renamed, moved, or deleted since it
-** was first opened.
-**
-**
- [[SQLITE_FCNTL_WIN32_SET_HANDLE]]
-** The [SQLITE_FCNTL_WIN32_SET_HANDLE] opcode is used for debugging. This
-** opcode causes the xFileControl method to swap the file handle with the one
-** pointed to by the pArg argument. This capability is used during testing
-** and only needs to be supported when SQLITE_TEST is defined.
-**
-**
- [[SQLITE_FCNTL_WAL_BLOCK]]
-** The [SQLITE_FCNTL_WAL_BLOCK] is a signal to the VFS layer that it might
-** be advantageous to block on the next WAL lock if the lock is not immediately
-** available. The WAL subsystem issues this signal during rare
-** circumstances in order to fix a problem with priority inversion.
-** Applications should not use this file-control.
-**
-**
- [[SQLITE_FCNTL_ZIPVFS]]
-** The [SQLITE_FCNTL_ZIPVFS] opcode is implemented by zipvfs only. All other
-** VFS should return SQLITE_NOTFOUND for this opcode.
-**
-**
- [[SQLITE_FCNTL_RBU]]
-** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by
-** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for
-** this opcode.
-**
-*/
-#define SQLITE_FCNTL_LOCKSTATE 1
-#define SQLITE_FCNTL_GET_LOCKPROXYFILE 2
-#define SQLITE_FCNTL_SET_LOCKPROXYFILE 3
-#define SQLITE_FCNTL_LAST_ERRNO 4
-#define SQLITE_FCNTL_SIZE_HINT 5
-#define SQLITE_FCNTL_CHUNK_SIZE 6
-#define SQLITE_FCNTL_FILE_POINTER 7
-#define SQLITE_FCNTL_SYNC_OMITTED 8
-#define SQLITE_FCNTL_WIN32_AV_RETRY 9
-#define SQLITE_FCNTL_PERSIST_WAL 10
-#define SQLITE_FCNTL_OVERWRITE 11
-#define SQLITE_FCNTL_VFSNAME 12
-#define SQLITE_FCNTL_POWERSAFE_OVERWRITE 13
-#define SQLITE_FCNTL_PRAGMA 14
-#define SQLITE_FCNTL_BUSYHANDLER 15
-#define SQLITE_FCNTL_TEMPFILENAME 16
-#define SQLITE_FCNTL_MMAP_SIZE 18
-#define SQLITE_FCNTL_TRACE 19
-#define SQLITE_FCNTL_HAS_MOVED 20
-#define SQLITE_FCNTL_SYNC 21
-#define SQLITE_FCNTL_COMMIT_PHASETWO 22
-#define SQLITE_FCNTL_WIN32_SET_HANDLE 23
-#define SQLITE_FCNTL_WAL_BLOCK 24
-#define SQLITE_FCNTL_ZIPVFS 25
-#define SQLITE_FCNTL_RBU 26
-#define SQLITE_FCNTL_VFS_POINTER 27
-#define SQLITE_FCNTL_JOURNAL_POINTER 28
-
-/* deprecated names */
-#define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE
-#define SQLITE_SET_LOCKPROXYFILE SQLITE_FCNTL_SET_LOCKPROXYFILE
-#define SQLITE_LAST_ERRNO SQLITE_FCNTL_LAST_ERRNO
-
-
-/*
-** CAPI3REF: Mutex Handle
-**
-** The mutex module within SQLite defines [sqlite3_mutex] to be an
-** abstract type for a mutex object. The SQLite core never looks
-** at the internal representation of an [sqlite3_mutex]. It only
-** deals with pointers to the [sqlite3_mutex] object.
-**
-** Mutexes are created using [sqlite3_mutex_alloc()].
-*/
-typedef struct sqlite3_mutex sqlite3_mutex;
-
-/*
-** CAPI3REF: OS Interface Object
-**
-** An instance of the sqlite3_vfs object defines the interface between
-** the SQLite core and the underlying operating system. The "vfs"
-** in the name of the object stands for "virtual file system". See
-** the [VFS | VFS documentation] for further information.
-**
-** The value of the iVersion field is initially 1 but may be larger in
-** future versions of SQLite. Additional fields may be appended to this
-** object when the iVersion value is increased. Note that the structure
-** of the sqlite3_vfs object changes in the transaction between
-** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not
-** modified.
-**
-** The szOsFile field is the size of the subclassed [sqlite3_file]
-** structure used by this VFS. mxPathname is the maximum length of
-** a pathname in this VFS.
-**
-** Registered sqlite3_vfs objects are kept on a linked list formed by
-** the pNext pointer. The [sqlite3_vfs_register()]
-** and [sqlite3_vfs_unregister()] interfaces manage this list
-** in a thread-safe way. The [sqlite3_vfs_find()] interface
-** searches the list. Neither the application code nor the VFS
-** implementation should use the pNext pointer.
-**
-** The pNext field is the only field in the sqlite3_vfs
-** structure that SQLite will ever modify. SQLite will only access
-** or modify this field while holding a particular static mutex.
-** The application should never modify anything within the sqlite3_vfs
-** object once the object has been registered.
-**
-** The zName field holds the name of the VFS module. The name must
-** be unique across all VFS modules.
-**
-** [[sqlite3_vfs.xOpen]]
-** ^SQLite guarantees that the zFilename parameter to xOpen
-** is either a NULL pointer or string obtained
-** from xFullPathname() with an optional suffix added.
-** ^If a suffix is added to the zFilename parameter, it will
-** consist of a single "-" character followed by no more than
-** 11 alphanumeric and/or "-" characters.
-** ^SQLite further guarantees that
-** the string will be valid and unchanged until xClose() is
-** called. Because of the previous sentence,
-** the [sqlite3_file] can safely store a pointer to the
-** filename if it needs to remember the filename for some reason.
-** If the zFilename parameter to xOpen is a NULL pointer then xOpen
-** must invent its own temporary name for the file. ^Whenever the
-** xFilename parameter is NULL it will also be the case that the
-** flags parameter will include [SQLITE_OPEN_DELETEONCLOSE].
-**
-** The flags argument to xOpen() includes all bits set in
-** the flags argument to [sqlite3_open_v2()]. Or if [sqlite3_open()]
-** or [sqlite3_open16()] is used, then flags includes at least
-** [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE].
-** If xOpen() opens a file read-only then it sets *pOutFlags to
-** include [SQLITE_OPEN_READONLY]. Other bits in *pOutFlags may be set.
-**
-** ^(SQLite will also add one of the following flags to the xOpen()
-** call, depending on the object being opened:
-**
-**
-** - [SQLITE_OPEN_MAIN_DB]
-**
- [SQLITE_OPEN_MAIN_JOURNAL]
-**
- [SQLITE_OPEN_TEMP_DB]
-**
- [SQLITE_OPEN_TEMP_JOURNAL]
-**
- [SQLITE_OPEN_TRANSIENT_DB]
-**
- [SQLITE_OPEN_SUBJOURNAL]
-**
- [SQLITE_OPEN_MASTER_JOURNAL]
-**
- [SQLITE_OPEN_WAL]
-**
)^
-**
-** The file I/O implementation can use the object type flags to
-** change the way it deals with files. For example, an application
-** that does not care about crash recovery or rollback might make
-** the open of a journal file a no-op. Writes to this journal would
-** also be no-ops, and any attempt to read the journal would return
-** SQLITE_IOERR. Or the implementation might recognize that a database
-** file will be doing page-aligned sector reads and writes in a random
-** order and set up its I/O subsystem accordingly.
-**
-** SQLite might also add one of the following flags to the xOpen method:
-**
-**
-** - [SQLITE_OPEN_DELETEONCLOSE]
-**
- [SQLITE_OPEN_EXCLUSIVE]
-**
-**
-** The [SQLITE_OPEN_DELETEONCLOSE] flag means the file should be
-** deleted when it is closed. ^The [SQLITE_OPEN_DELETEONCLOSE]
-** will be set for TEMP databases and their journals, transient
-** databases, and subjournals.
-**
-** ^The [SQLITE_OPEN_EXCLUSIVE] flag is always used in conjunction
-** with the [SQLITE_OPEN_CREATE] flag, which are both directly
-** analogous to the O_EXCL and O_CREAT flags of the POSIX open()
-** API. The SQLITE_OPEN_EXCLUSIVE flag, when paired with the
-** SQLITE_OPEN_CREATE, is used to indicate that file should always
-** be created, and that it is an error if it already exists.
-** It is not used to indicate the file should be opened
-** for exclusive access.
-**
-** ^At least szOsFile bytes of memory are allocated by SQLite
-** to hold the [sqlite3_file] structure passed as the third
-** argument to xOpen. The xOpen method does not have to
-** allocate the structure; it should just fill it in. Note that
-** the xOpen method must set the sqlite3_file.pMethods to either
-** a valid [sqlite3_io_methods] object or to NULL. xOpen must do
-** this even if the open fails. SQLite expects that the sqlite3_file.pMethods
-** element will be valid after xOpen returns regardless of the success
-** or failure of the xOpen call.
-**
-** [[sqlite3_vfs.xAccess]]
-** ^The flags argument to xAccess() may be [SQLITE_ACCESS_EXISTS]
-** to test for the existence of a file, or [SQLITE_ACCESS_READWRITE] to
-** test whether a file is readable and writable, or [SQLITE_ACCESS_READ]
-** to test whether a file is at least readable. The file can be a
-** directory.
-**
-** ^SQLite will always allocate at least mxPathname+1 bytes for the
-** output buffer xFullPathname. The exact size of the output buffer
-** is also passed as a parameter to both methods. If the output buffer
-** is not large enough, [SQLITE_CANTOPEN] should be returned. Since this is
-** handled as a fatal error by SQLite, vfs implementations should endeavor
-** to prevent this by setting mxPathname to a sufficiently large value.
-**
-** The xRandomness(), xSleep(), xCurrentTime(), and xCurrentTimeInt64()
-** interfaces are not strictly a part of the filesystem, but they are
-** included in the VFS structure for completeness.
-** The xRandomness() function attempts to return nBytes bytes
-** of good-quality randomness into zOut. The return value is
-** the actual number of bytes of randomness obtained.
-** The xSleep() method causes the calling thread to sleep for at
-** least the number of microseconds given. ^The xCurrentTime()
-** method returns a Julian Day Number for the current date and time as
-** a floating point value.
-** ^The xCurrentTimeInt64() method returns, as an integer, the Julian
-** Day Number multiplied by 86400000 (the number of milliseconds in
-** a 24-hour day).
-** ^SQLite will use the xCurrentTimeInt64() method to get the current
-** date and time if that method is available (if iVersion is 2 or
-** greater and the function pointer is not NULL) and will fall back
-** to xCurrentTime() if xCurrentTimeInt64() is unavailable.
-**
-** ^The xSetSystemCall(), xGetSystemCall(), and xNestSystemCall() interfaces
-** are not used by the SQLite core. These optional interfaces are provided
-** by some VFSes to facilitate testing of the VFS code. By overriding
-** system calls with functions under its control, a test program can
-** simulate faults and error conditions that would otherwise be difficult
-** or impossible to induce. The set of system calls that can be overridden
-** varies from one VFS to another, and from one version of the same VFS to the
-** next. Applications that use these interfaces must be prepared for any
-** or all of these interfaces to be NULL or for their behavior to change
-** from one release to the next. Applications must not attempt to access
-** any of these methods if the iVersion of the VFS is less than 3.
-*/
-typedef struct sqlite3_vfs sqlite3_vfs;
-typedef void (*sqlite3_syscall_ptr)(void);
-struct sqlite3_vfs {
- int iVersion; /* Structure version number (currently 3) */
- int szOsFile; /* Size of subclassed sqlite3_file */
- int mxPathname; /* Maximum file pathname length */
- sqlite3_vfs *pNext; /* Next registered VFS */
- const char *zName; /* Name of this virtual file system */
- void *pAppData; /* Pointer to application-specific data */
- int (*xOpen)(sqlite3_vfs*, const char *zName, sqlite3_file*,
- int flags, int *pOutFlags);
- int (*xDelete)(sqlite3_vfs*, const char *zName, int syncDir);
- int (*xAccess)(sqlite3_vfs*, const char *zName, int flags, int *pResOut);
- int (*xFullPathname)(sqlite3_vfs*, const char *zName, int nOut, char *zOut);
- void *(*xDlOpen)(sqlite3_vfs*, const char *zFilename);
- void (*xDlError)(sqlite3_vfs*, int nByte, char *zErrMsg);
- void (*(*xDlSym)(sqlite3_vfs*,void*, const char *zSymbol))(void);
- void (*xDlClose)(sqlite3_vfs*, void*);
- int (*xRandomness)(sqlite3_vfs*, int nByte, char *zOut);
- int (*xSleep)(sqlite3_vfs*, int microseconds);
- int (*xCurrentTime)(sqlite3_vfs*, double*);
- int (*xGetLastError)(sqlite3_vfs*, int, char *);
- /*
- ** The methods above are in version 1 of the sqlite_vfs object
- ** definition. Those that follow are added in version 2 or later
- */
- int (*xCurrentTimeInt64)(sqlite3_vfs*, sqlite3_int64*);
- /*
- ** The methods above are in versions 1 and 2 of the sqlite_vfs object.
- ** Those below are for version 3 and greater.
- */
- int (*xSetSystemCall)(sqlite3_vfs*, const char *zName, sqlite3_syscall_ptr);
- sqlite3_syscall_ptr (*xGetSystemCall)(sqlite3_vfs*, const char *zName);
- const char *(*xNextSystemCall)(sqlite3_vfs*, const char *zName);
- /*
- ** The methods above are in versions 1 through 3 of the sqlite_vfs object.
- ** New fields may be appended in future versions. The iVersion
- ** value will increment whenever this happens.
- */
-};
-
-/*
-** CAPI3REF: Flags for the xAccess VFS method
-**
-** These integer constants can be used as the third parameter to
-** the xAccess method of an [sqlite3_vfs] object. They determine
-** what kind of permissions the xAccess method is looking for.
-** With SQLITE_ACCESS_EXISTS, the xAccess method
-** simply checks whether the file exists.
-** With SQLITE_ACCESS_READWRITE, the xAccess method
-** checks whether the named directory is both readable and writable
-** (in other words, if files can be added, removed, and renamed within
-** the directory).
-** The SQLITE_ACCESS_READWRITE constant is currently used only by the
-** [temp_store_directory pragma], though this could change in a future
-** release of SQLite.
-** With SQLITE_ACCESS_READ, the xAccess method
-** checks whether the file is readable. The SQLITE_ACCESS_READ constant is
-** currently unused, though it might be used in a future release of
-** SQLite.
-*/
-#define SQLITE_ACCESS_EXISTS 0
-#define SQLITE_ACCESS_READWRITE 1 /* Used by PRAGMA temp_store_directory */
-#define SQLITE_ACCESS_READ 2 /* Unused */
-
-/*
-** CAPI3REF: Flags for the xShmLock VFS method
-**
-** These integer constants define the various locking operations
-** allowed by the xShmLock method of [sqlite3_io_methods]. The
-** following are the only legal combinations of flags to the
-** xShmLock method:
-**
-**
-** - SQLITE_SHM_LOCK | SQLITE_SHM_SHARED
-**
- SQLITE_SHM_LOCK | SQLITE_SHM_EXCLUSIVE
-**
- SQLITE_SHM_UNLOCK | SQLITE_SHM_SHARED
-**
- SQLITE_SHM_UNLOCK | SQLITE_SHM_EXCLUSIVE
-**
-**
-** When unlocking, the same SHARED or EXCLUSIVE flag must be supplied as
-** was given on the corresponding lock.
-**
-** The xShmLock method can transition between unlocked and SHARED or
-** between unlocked and EXCLUSIVE. It cannot transition between SHARED
-** and EXCLUSIVE.
-*/
-#define SQLITE_SHM_UNLOCK 1
-#define SQLITE_SHM_LOCK 2
-#define SQLITE_SHM_SHARED 4
-#define SQLITE_SHM_EXCLUSIVE 8
-
-/*
-** CAPI3REF: Maximum xShmLock index
-**
-** The xShmLock method on [sqlite3_io_methods] may use values
-** between 0 and this upper bound as its "offset" argument.
-** The SQLite core will never attempt to acquire or release a
-** lock outside of this range
-*/
-#define SQLITE_SHM_NLOCK 8
-
-
-/*
-** CAPI3REF: Initialize The SQLite Library
-**
-** ^The sqlite3_initialize() routine initializes the
-** SQLite library. ^The sqlite3_shutdown() routine
-** deallocates any resources that were allocated by sqlite3_initialize().
-** These routines are designed to aid in process initialization and
-** shutdown on embedded systems. Workstation applications using
-** SQLite normally do not need to invoke either of these routines.
-**
-** A call to sqlite3_initialize() is an "effective" call if it is
-** the first time sqlite3_initialize() is invoked during the lifetime of
-** the process, or if it is the first time sqlite3_initialize() is invoked
-** following a call to sqlite3_shutdown(). ^(Only an effective call
-** of sqlite3_initialize() does any initialization. All other calls
-** are harmless no-ops.)^
-**
-** A call to sqlite3_shutdown() is an "effective" call if it is the first
-** call to sqlite3_shutdown() since the last sqlite3_initialize(). ^(Only
-** an effective call to sqlite3_shutdown() does any deinitialization.
-** All other valid calls to sqlite3_shutdown() are harmless no-ops.)^
-**
-** The sqlite3_initialize() interface is threadsafe, but sqlite3_shutdown()
-** is not. The sqlite3_shutdown() interface must only be called from a
-** single thread. All open [database connections] must be closed and all
-** other SQLite resources must be deallocated prior to invoking
-** sqlite3_shutdown().
-**
-** Among other things, ^sqlite3_initialize() will invoke
-** sqlite3_os_init(). Similarly, ^sqlite3_shutdown()
-** will invoke sqlite3_os_end().
-**
-** ^The sqlite3_initialize() routine returns [SQLITE_OK] on success.
-** ^If for some reason, sqlite3_initialize() is unable to initialize
-** the library (perhaps it is unable to allocate a needed resource such
-** as a mutex) it returns an [error code] other than [SQLITE_OK].
-**
-** ^The sqlite3_initialize() routine is called internally by many other
-** SQLite interfaces so that an application usually does not need to
-** invoke sqlite3_initialize() directly. For example, [sqlite3_open()]
-** calls sqlite3_initialize() so the SQLite library will be automatically
-** initialized when [sqlite3_open()] is called if it has not be initialized
-** already. ^However, if SQLite is compiled with the [SQLITE_OMIT_AUTOINIT]
-** compile-time option, then the automatic calls to sqlite3_initialize()
-** are omitted and the application must call sqlite3_initialize() directly
-** prior to using any other SQLite interface. For maximum portability,
-** it is recommended that applications always invoke sqlite3_initialize()
-** directly prior to using any other SQLite interface. Future releases
-** of SQLite may require this. In other words, the behavior exhibited
-** when SQLite is compiled with [SQLITE_OMIT_AUTOINIT] might become the
-** default behavior in some future release of SQLite.
-**
-** The sqlite3_os_init() routine does operating-system specific
-** initialization of the SQLite library. The sqlite3_os_end()
-** routine undoes the effect of sqlite3_os_init(). Typical tasks
-** performed by these routines include allocation or deallocation
-** of static resources, initialization of global variables,
-** setting up a default [sqlite3_vfs] module, or setting up
-** a default configuration using [sqlite3_config()].
-**
-** The application should never invoke either sqlite3_os_init()
-** or sqlite3_os_end() directly. The application should only invoke
-** sqlite3_initialize() and sqlite3_shutdown(). The sqlite3_os_init()
-** interface is called automatically by sqlite3_initialize() and
-** sqlite3_os_end() is called by sqlite3_shutdown(). Appropriate
-** implementations for sqlite3_os_init() and sqlite3_os_end()
-** are built into SQLite when it is compiled for Unix, Windows, or OS/2.
-** When [custom builds | built for other platforms]
-** (using the [SQLITE_OS_OTHER=1] compile-time
-** option) the application must supply a suitable implementation for
-** sqlite3_os_init() and sqlite3_os_end(). An application-supplied
-** implementation of sqlite3_os_init() or sqlite3_os_end()
-** must return [SQLITE_OK] on success and some other [error code] upon
-** failure.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_initialize(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_shutdown(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_init(void);
-SQLITE_API int SQLITE_STDCALL sqlite3_os_end(void);
-
-/*
-** CAPI3REF: Configuring The SQLite Library
-**
-** The sqlite3_config() interface is used to make global configuration
-** changes to SQLite in order to tune SQLite to the specific needs of
-** the application. The default configuration is recommended for most
-** applications and so this routine is usually not necessary. It is
-** provided to support rare applications with unusual needs.
-**
-** The sqlite3_config() interface is not threadsafe. The application
-** must ensure that no other SQLite interfaces are invoked by other
-** threads while sqlite3_config() is running.
-**
-** The sqlite3_config() interface
-** may only be invoked prior to library initialization using
-** [sqlite3_initialize()] or after shutdown by [sqlite3_shutdown()].
-** ^If sqlite3_config() is called after [sqlite3_initialize()] and before
-** [sqlite3_shutdown()] then it will return SQLITE_MISUSE.
-** Note, however, that ^sqlite3_config() can be called as part of the
-** implementation of an application-defined [sqlite3_os_init()].
-**
-** The first argument to sqlite3_config() is an integer
-** [configuration option] that determines
-** what property of SQLite is to be configured. Subsequent arguments
-** vary depending on the [configuration option]
-** in the first argument.
-**
-** ^When a configuration option is set, sqlite3_config() returns [SQLITE_OK].
-** ^If the option is unknown or SQLite is unable to set the option
-** then this routine returns a non-zero [error code].
-*/
-SQLITE_API int SQLITE_CDECL sqlite3_config(int, ...);
-
-/*
-** CAPI3REF: Configure database connections
-** METHOD: sqlite3
-**
-** The sqlite3_db_config() interface is used to make configuration
-** changes to a [database connection]. The interface is similar to
-** [sqlite3_config()] except that the changes apply to a single
-** [database connection] (specified in the first argument).
-**
-** The second argument to sqlite3_db_config(D,V,...) is the
-** [SQLITE_DBCONFIG_LOOKASIDE | configuration verb] - an integer code
-** that indicates what aspect of the [database connection] is being configured.
-** Subsequent arguments vary depending on the configuration verb.
-**
-** ^Calls to sqlite3_db_config() return SQLITE_OK if and only if
-** the call is considered successful.
-*/
-SQLITE_API int SQLITE_CDECL sqlite3_db_config(sqlite3*, int op, ...);
-
-/*
-** CAPI3REF: Memory Allocation Routines
-**
-** An instance of this object defines the interface between SQLite
-** and low-level memory allocation routines.
-**
-** This object is used in only one place in the SQLite interface.
-** A pointer to an instance of this object is the argument to
-** [sqlite3_config()] when the configuration option is
-** [SQLITE_CONFIG_MALLOC] or [SQLITE_CONFIG_GETMALLOC].
-** By creating an instance of this object
-** and passing it to [sqlite3_config]([SQLITE_CONFIG_MALLOC])
-** during configuration, an application can specify an alternative
-** memory allocation subsystem for SQLite to use for all of its
-** dynamic memory needs.
-**
-** Note that SQLite comes with several [built-in memory allocators]
-** that are perfectly adequate for the overwhelming majority of applications
-** and that this object is only useful to a tiny minority of applications
-** with specialized memory allocation requirements. This object is
-** also used during testing of SQLite in order to specify an alternative
-** memory allocator that simulates memory out-of-memory conditions in
-** order to verify that SQLite recovers gracefully from such
-** conditions.
-**
-** The xMalloc, xRealloc, and xFree methods must work like the
-** malloc(), realloc() and free() functions from the standard C library.
-** ^SQLite guarantees that the second argument to
-** xRealloc is always a value returned by a prior call to xRoundup.
-**
-** xSize should return the allocated size of a memory allocation
-** previously obtained from xMalloc or xRealloc. The allocated size
-** is always at least as big as the requested size but may be larger.
-**
-** The xRoundup method returns what would be the allocated size of
-** a memory allocation given a particular requested size. Most memory
-** allocators round up memory allocations at least to the next multiple
-** of 8. Some allocators round up to a larger multiple or to a power of 2.
-** Every memory allocation request coming in through [sqlite3_malloc()]
-** or [sqlite3_realloc()] first calls xRoundup. If xRoundup returns 0,
-** that causes the corresponding memory allocation to fail.
-**
-** The xInit method initializes the memory allocator. For example,
-** it might allocate any require mutexes or initialize internal data
-** structures. The xShutdown method is invoked (indirectly) by
-** [sqlite3_shutdown()] and should deallocate any resources acquired
-** by xInit. The pAppData pointer is used as the only parameter to
-** xInit and xShutdown.
-**
-** SQLite holds the [SQLITE_MUTEX_STATIC_MASTER] mutex when it invokes
-** the xInit method, so the xInit method need not be threadsafe. The
-** xShutdown method is only called from [sqlite3_shutdown()] so it does
-** not need to be threadsafe either. For all other methods, SQLite
-** holds the [SQLITE_MUTEX_STATIC_MEM] mutex as long as the
-** [SQLITE_CONFIG_MEMSTATUS] configuration option is turned on (which
-** it is by default) and so the methods are automatically serialized.
-** However, if [SQLITE_CONFIG_MEMSTATUS] is disabled, then the other
-** methods must be threadsafe or else make their own arrangements for
-** serialization.
-**
-** SQLite will never invoke xInit() more than once without an intervening
-** call to xShutdown().
-*/
-typedef struct sqlite3_mem_methods sqlite3_mem_methods;
-struct sqlite3_mem_methods {
- void *(*xMalloc)(int); /* Memory allocation function */
- void (*xFree)(void*); /* Free a prior allocation */
- void *(*xRealloc)(void*,int); /* Resize an allocation */
- int (*xSize)(void*); /* Return the size of an allocation */
- int (*xRoundup)(int); /* Round up request size to allocation size */
- int (*xInit)(void*); /* Initialize the memory allocator */
- void (*xShutdown)(void*); /* Deinitialize the memory allocator */
- void *pAppData; /* Argument to xInit() and xShutdown() */
-};
-
-/*
-** CAPI3REF: Configuration Options
-** KEYWORDS: {configuration option}
-**
-** These constants are the available integer configuration options that
-** can be passed as the first argument to the [sqlite3_config()] interface.
-**
-** New configuration options may be added in future releases of SQLite.
-** Existing configuration options might be discontinued. Applications
-** should check the return code from [sqlite3_config()] to make sure that
-** the call worked. The [sqlite3_config()] interface will return a
-** non-zero [error code] if a discontinued or unsupported configuration option
-** is invoked.
-**
-**
-** [[SQLITE_CONFIG_SINGLETHREAD]] - SQLITE_CONFIG_SINGLETHREAD
-** - There are no arguments to this option. ^This option sets the
-** [threading mode] to Single-thread. In other words, it disables
-** all mutexing and puts SQLite into a mode where it can only be used
-** by a single thread. ^If SQLite is compiled with
-** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
-** it is not possible to change the [threading mode] from its default
-** value of Single-thread and so [sqlite3_config()] will return
-** [SQLITE_ERROR] if called with the SQLITE_CONFIG_SINGLETHREAD
-** configuration option.
-**
-** [[SQLITE_CONFIG_MULTITHREAD]] - SQLITE_CONFIG_MULTITHREAD
-** - There are no arguments to this option. ^This option sets the
-** [threading mode] to Multi-thread. In other words, it disables
-** mutexing on [database connection] and [prepared statement] objects.
-** The application is responsible for serializing access to
-** [database connections] and [prepared statements]. But other mutexes
-** are enabled so that SQLite will be safe to use in a multi-threaded
-** environment as long as no two threads attempt to use the same
-** [database connection] at the same time. ^If SQLite is compiled with
-** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
-** it is not possible to set the Multi-thread [threading mode] and
-** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
-** SQLITE_CONFIG_MULTITHREAD configuration option.
-**
-** [[SQLITE_CONFIG_SERIALIZED]] - SQLITE_CONFIG_SERIALIZED
-** - There are no arguments to this option. ^This option sets the
-** [threading mode] to Serialized. In other words, this option enables
-** all mutexes including the recursive
-** mutexes on [database connection] and [prepared statement] objects.
-** In this mode (which is the default when SQLite is compiled with
-** [SQLITE_THREADSAFE=1]) the SQLite library will itself serialize access
-** to [database connections] and [prepared statements] so that the
-** application is free to use the same [database connection] or the
-** same [prepared statement] in different threads at the same time.
-** ^If SQLite is compiled with
-** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
-** it is not possible to set the Serialized [threading mode] and
-** [sqlite3_config()] will return [SQLITE_ERROR] if called with the
-** SQLITE_CONFIG_SERIALIZED configuration option.
-**
-** [[SQLITE_CONFIG_MALLOC]] - SQLITE_CONFIG_MALLOC
-** - ^(The SQLITE_CONFIG_MALLOC option takes a single argument which is
-** a pointer to an instance of the [sqlite3_mem_methods] structure.
-** The argument specifies
-** alternative low-level memory allocation routines to be used in place of
-** the memory allocation routines built into SQLite.)^ ^SQLite makes
-** its own private copy of the content of the [sqlite3_mem_methods] structure
-** before the [sqlite3_config()] call returns.
-**
-** [[SQLITE_CONFIG_GETMALLOC]] - SQLITE_CONFIG_GETMALLOC
-** - ^(The SQLITE_CONFIG_GETMALLOC option takes a single argument which
-** is a pointer to an instance of the [sqlite3_mem_methods] structure.
-** The [sqlite3_mem_methods]
-** structure is filled with the currently defined memory allocation routines.)^
-** This option can be used to overload the default memory allocation
-** routines with a wrapper that simulations memory allocation failure or
-** tracks memory usage, for example.
-**
-** [[SQLITE_CONFIG_MEMSTATUS]] - SQLITE_CONFIG_MEMSTATUS
-** - ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int,
-** interpreted as a boolean, which enables or disables the collection of
-** memory allocation statistics. ^(When memory allocation statistics are
-** disabled, the following SQLite interfaces become non-operational:
-**
-** - [sqlite3_memory_used()]
-**
- [sqlite3_memory_highwater()]
-**
- [sqlite3_soft_heap_limit64()]
-**
- [sqlite3_status64()]
-**
)^
-** ^Memory allocation statistics are enabled by default unless SQLite is
-** compiled with [SQLITE_DEFAULT_MEMSTATUS]=0 in which case memory
-** allocation statistics are disabled by default.
-**
-**
-** [[SQLITE_CONFIG_SCRATCH]] - SQLITE_CONFIG_SCRATCH
-** - ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer
-** that SQLite can use for scratch memory. ^(There are three arguments
-** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte
-** aligned memory buffer from which the scratch allocations will be
-** drawn, the size of each scratch allocation (sz),
-** and the maximum number of scratch allocations (N).)^
-** The first argument must be a pointer to an 8-byte aligned buffer
-** of at least sz*N bytes of memory.
-** ^SQLite will not use more than one scratch buffers per thread.
-** ^SQLite will never request a scratch buffer that is more than 6
-** times the database page size.
-** ^If SQLite needs needs additional
-** scratch memory beyond what is provided by this configuration option, then
-** [sqlite3_malloc()] will be used to obtain the memory needed.
-** ^When the application provides any amount of scratch memory using
-** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large
-** [sqlite3_malloc|heap allocations].
-** This can help [Robson proof|prevent memory allocation failures] due to heap
-** fragmentation in low-memory embedded systems.
-**
-**
-** [[SQLITE_CONFIG_PAGECACHE]] - SQLITE_CONFIG_PAGECACHE
-** - ^The SQLITE_CONFIG_PAGECACHE option specifies a memory pool
-** that SQLite can use for the database page cache with the default page
-** cache implementation.
-** This configuration option is a no-op if an application-define page
-** cache implementation is loaded using the [SQLITE_CONFIG_PCACHE2].
-** ^There are three arguments to SQLITE_CONFIG_PAGECACHE: A pointer to
-** 8-byte aligned memory (pMem), the size of each page cache line (sz),
-** and the number of cache lines (N).
-** The sz argument should be the size of the largest database page
-** (a power of two between 512 and 65536) plus some extra bytes for each
-** page header. ^The number of extra bytes needed by the page header
-** can be determined using [SQLITE_CONFIG_PCACHE_HDRSZ].
-** ^It is harmless, apart from the wasted memory,
-** for the sz parameter to be larger than necessary. The pMem
-** argument must be either a NULL pointer or a pointer to an 8-byte
-** aligned block of memory of at least sz*N bytes, otherwise
-** subsequent behavior is undefined.
-** ^When pMem is not NULL, SQLite will strive to use the memory provided
-** to satisfy page cache needs, falling back to [sqlite3_malloc()] if
-** a page cache line is larger than sz bytes or if all of the pMem buffer
-** is exhausted.
-** ^If pMem is NULL and N is non-zero, then each database connection
-** does an initial bulk allocation for page cache memory
-** from [sqlite3_malloc()] sufficient for N cache lines if N is positive or
-** of -1024*N bytes if N is negative, . ^If additional
-** page cache memory is needed beyond what is provided by the initial
-** allocation, then SQLite goes to [sqlite3_malloc()] separately for each
-** additional cache line.
-**
-** [[SQLITE_CONFIG_HEAP]] - SQLITE_CONFIG_HEAP
-** - ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer
-** that SQLite will use for all of its dynamic memory allocation needs
-** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and
-** [SQLITE_CONFIG_PAGECACHE].
-** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled
-** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns
-** [SQLITE_ERROR] if invoked otherwise.
-** ^There are three arguments to SQLITE_CONFIG_HEAP:
-** An 8-byte aligned pointer to the memory,
-** the number of bytes in the memory buffer, and the minimum allocation size.
-** ^If the first pointer (the memory pointer) is NULL, then SQLite reverts
-** to using its default memory allocator (the system malloc() implementation),
-** undoing any prior invocation of [SQLITE_CONFIG_MALLOC]. ^If the
-** memory pointer is not NULL then the alternative memory
-** allocator is engaged to handle all of SQLites memory allocation needs.
-** The first pointer (the memory pointer) must be aligned to an 8-byte
-** boundary or subsequent behavior of SQLite will be undefined.
-** The minimum allocation size is capped at 2**12. Reasonable values
-** for the minimum allocation size are 2**5 through 2**8.
-**
-** [[SQLITE_CONFIG_MUTEX]] - SQLITE_CONFIG_MUTEX
-** - ^(The SQLITE_CONFIG_MUTEX option takes a single argument which is a
-** pointer to an instance of the [sqlite3_mutex_methods] structure.
-** The argument specifies alternative low-level mutex routines to be used
-** in place the mutex routines built into SQLite.)^ ^SQLite makes a copy of
-** the content of the [sqlite3_mutex_methods] structure before the call to
-** [sqlite3_config()] returns. ^If SQLite is compiled with
-** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
-** the entire mutexing subsystem is omitted from the build and hence calls to
-** [sqlite3_config()] with the SQLITE_CONFIG_MUTEX configuration option will
-** return [SQLITE_ERROR].
-**
-** [[SQLITE_CONFIG_GETMUTEX]] - SQLITE_CONFIG_GETMUTEX
-** - ^(The SQLITE_CONFIG_GETMUTEX option takes a single argument which
-** is a pointer to an instance of the [sqlite3_mutex_methods] structure. The
-** [sqlite3_mutex_methods]
-** structure is filled with the currently defined mutex routines.)^
-** This option can be used to overload the default mutex allocation
-** routines with a wrapper used to track mutex usage for performance
-** profiling or testing, for example. ^If SQLite is compiled with
-** the [SQLITE_THREADSAFE | SQLITE_THREADSAFE=0] compile-time option then
-** the entire mutexing subsystem is omitted from the build and hence calls to
-** [sqlite3_config()] with the SQLITE_CONFIG_GETMUTEX configuration option will
-** return [SQLITE_ERROR].
-**
-** [[SQLITE_CONFIG_LOOKASIDE]] - SQLITE_CONFIG_LOOKASIDE
-** - ^(The SQLITE_CONFIG_LOOKASIDE option takes two arguments that determine
-** the default size of lookaside memory on each [database connection].
-** The first argument is the
-** size of each lookaside buffer slot and the second is the number of
-** slots allocated to each database connection.)^ ^(SQLITE_CONFIG_LOOKASIDE
-** sets the default lookaside size. The [SQLITE_DBCONFIG_LOOKASIDE]
-** option to [sqlite3_db_config()] can be used to change the lookaside
-** configuration on individual connections.)^
-**
-** [[SQLITE_CONFIG_PCACHE2]] - SQLITE_CONFIG_PCACHE2
-** - ^(The SQLITE_CONFIG_PCACHE2 option takes a single argument which is
-** a pointer to an [sqlite3_pcache_methods2] object. This object specifies
-** the interface to a custom page cache implementation.)^
-** ^SQLite makes a copy of the [sqlite3_pcache_methods2] object.
-**
-** [[SQLITE_CONFIG_GETPCACHE2]] - SQLITE_CONFIG_GETPCACHE2
-** - ^(The SQLITE_CONFIG_GETPCACHE2 option takes a single argument which
-** is a pointer to an [sqlite3_pcache_methods2] object. SQLite copies of
-** the current page cache implementation into that object.)^
-**
-** [[SQLITE_CONFIG_LOG]] - SQLITE_CONFIG_LOG
-** - The SQLITE_CONFIG_LOG option is used to configure the SQLite
-** global [error log].
-** (^The SQLITE_CONFIG_LOG option takes two arguments: a pointer to a
-** function with a call signature of void(*)(void*,int,const char*),
-** and a pointer to void. ^If the function pointer is not NULL, it is
-** invoked by [sqlite3_log()] to process each logging event. ^If the
-** function pointer is NULL, the [sqlite3_log()] interface becomes a no-op.
-** ^The void pointer that is the second argument to SQLITE_CONFIG_LOG is
-** passed through as the first parameter to the application-defined logger
-** function whenever that function is invoked. ^The second parameter to
-** the logger function is a copy of the first parameter to the corresponding
-** [sqlite3_log()] call and is intended to be a [result code] or an
-** [extended result code]. ^The third parameter passed to the logger is
-** log message after formatting via [sqlite3_snprintf()].
-** The SQLite logging interface is not reentrant; the logger function
-** supplied by the application must not invoke any SQLite interface.
-** In a multi-threaded application, the application-defined logger
-** function must be threadsafe.
-**
-** [[SQLITE_CONFIG_URI]] - SQLITE_CONFIG_URI
-**
- ^(The SQLITE_CONFIG_URI option takes a single argument of type int.
-** If non-zero, then URI handling is globally enabled. If the parameter is zero,
-** then URI handling is globally disabled.)^ ^If URI handling is globally
-** enabled, all filenames passed to [sqlite3_open()], [sqlite3_open_v2()],
-** [sqlite3_open16()] or
-** specified as part of [ATTACH] commands are interpreted as URIs, regardless
-** of whether or not the [SQLITE_OPEN_URI] flag is set when the database
-** connection is opened. ^If it is globally disabled, filenames are
-** only interpreted as URIs if the SQLITE_OPEN_URI flag is set when the
-** database connection is opened. ^(By default, URI handling is globally
-** disabled. The default value may be changed by compiling with the
-** [SQLITE_USE_URI] symbol defined.)^
-**
-** [[SQLITE_CONFIG_COVERING_INDEX_SCAN]]
- SQLITE_CONFIG_COVERING_INDEX_SCAN
-**
- ^The SQLITE_CONFIG_COVERING_INDEX_SCAN option takes a single integer
-** argument which is interpreted as a boolean in order to enable or disable
-** the use of covering indices for full table scans in the query optimizer.
-** ^The default setting is determined
-** by the [SQLITE_ALLOW_COVERING_INDEX_SCAN] compile-time option, or is "on"
-** if that compile-time option is omitted.
-** The ability to disable the use of covering indices for full table scans
-** is because some incorrectly coded legacy applications might malfunction
-** when the optimization is enabled. Providing the ability to
-** disable the optimization allows the older, buggy application code to work
-** without change even with newer versions of SQLite.
-**
-** [[SQLITE_CONFIG_PCACHE]] [[SQLITE_CONFIG_GETPCACHE]]
-**
- SQLITE_CONFIG_PCACHE and SQLITE_CONFIG_GETPCACHE
-**
- These options are obsolete and should not be used by new code.
-** They are retained for backwards compatibility but are now no-ops.
-**
-**
-** [[SQLITE_CONFIG_SQLLOG]]
-** - SQLITE_CONFIG_SQLLOG
-**
- This option is only available if sqlite is compiled with the
-** [SQLITE_ENABLE_SQLLOG] pre-processor macro defined. The first argument should
-** be a pointer to a function of type void(*)(void*,sqlite3*,const char*, int).
-** The second should be of type (void*). The callback is invoked by the library
-** in three separate circumstances, identified by the value passed as the
-** fourth parameter. If the fourth parameter is 0, then the database connection
-** passed as the second argument has just been opened. The third argument
-** points to a buffer containing the name of the main database file. If the
-** fourth parameter is 1, then the SQL statement that the third parameter
-** points to has just been executed. Or, if the fourth parameter is 2, then
-** the connection being passed as the second parameter is being closed. The
-** third parameter is passed NULL In this case. An example of using this
-** configuration option can be seen in the "test_sqllog.c" source file in
-** the canonical SQLite source tree.
-**
-** [[SQLITE_CONFIG_MMAP_SIZE]]
-** - SQLITE_CONFIG_MMAP_SIZE
-**
- ^SQLITE_CONFIG_MMAP_SIZE takes two 64-bit integer (sqlite3_int64) values
-** that are the default mmap size limit (the default setting for
-** [PRAGMA mmap_size]) and the maximum allowed mmap size limit.
-** ^The default setting can be overridden by each database connection using
-** either the [PRAGMA mmap_size] command, or by using the
-** [SQLITE_FCNTL_MMAP_SIZE] file control. ^(The maximum allowed mmap size
-** will be silently truncated if necessary so that it does not exceed the
-** compile-time maximum mmap size set by the
-** [SQLITE_MAX_MMAP_SIZE] compile-time option.)^
-** ^If either argument to this option is negative, then that argument is
-** changed to its compile-time default.
-**
-** [[SQLITE_CONFIG_WIN32_HEAPSIZE]]
-**
- SQLITE_CONFIG_WIN32_HEAPSIZE
-**
- ^The SQLITE_CONFIG_WIN32_HEAPSIZE option is only available if SQLite is
-** compiled for Windows with the [SQLITE_WIN32_MALLOC] pre-processor macro
-** defined. ^SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit unsigned integer value
-** that specifies the maximum size of the created heap.
-**
-** [[SQLITE_CONFIG_PCACHE_HDRSZ]]
-**
- SQLITE_CONFIG_PCACHE_HDRSZ
-**
- ^The SQLITE_CONFIG_PCACHE_HDRSZ option takes a single parameter which
-** is a pointer to an integer and writes into that integer the number of extra
-** bytes per page required for each page in [SQLITE_CONFIG_PAGECACHE].
-** The amount of extra space required can change depending on the compiler,
-** target platform, and SQLite version.
-**
-** [[SQLITE_CONFIG_PMASZ]]
-**
- SQLITE_CONFIG_PMASZ
-**
- ^The SQLITE_CONFIG_PMASZ option takes a single parameter which
-** is an unsigned integer and sets the "Minimum PMA Size" for the multithreaded
-** sorter to that integer. The default minimum PMA Size is set by the
-** [SQLITE_SORTER_PMASZ] compile-time option. New threads are launched
-** to help with sort operations when multithreaded sorting
-** is enabled (using the [PRAGMA threads] command) and the amount of content
-** to be sorted exceeds the page size times the minimum of the
-** [PRAGMA cache_size] setting and this value.
-**
-** [[SQLITE_CONFIG_STMTJRNL_SPILL]]
-**
- SQLITE_CONFIG_STMTJRNL_SPILL
-**
- ^The SQLITE_CONFIG_STMTJRNL_SPILL option takes a single parameter which
-** becomes the [statement journal] spill-to-disk threshold.
-** [Statement journals] are held in memory until their size (in bytes)
-** exceeds this threshold, at which point they are written to disk.
-** Or if the threshold is -1, statement journals are always held
-** exclusively in memory.
-** Since many statement journals never become large, setting the spill
-** threshold to a value such as 64KiB can greatly reduce the amount of
-** I/O required to support statement rollback.
-** The default value for this setting is controlled by the
-** [SQLITE_STMTJRNL_SPILL] compile-time option.
-**
-*/
-#define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */
-#define SQLITE_CONFIG_MULTITHREAD 2 /* nil */
-#define SQLITE_CONFIG_SERIALIZED 3 /* nil */
-#define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */
-#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */
-#define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */
-#define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */
-#define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */
-#define SQLITE_CONFIG_MUTEX 10 /* sqlite3_mutex_methods* */
-#define SQLITE_CONFIG_GETMUTEX 11 /* sqlite3_mutex_methods* */
-/* previously SQLITE_CONFIG_CHUNKALLOC 12 which is now unused. */
-#define SQLITE_CONFIG_LOOKASIDE 13 /* int int */
-#define SQLITE_CONFIG_PCACHE 14 /* no-op */
-#define SQLITE_CONFIG_GETPCACHE 15 /* no-op */
-#define SQLITE_CONFIG_LOG 16 /* xFunc, void* */
-#define SQLITE_CONFIG_URI 17 /* int */
-#define SQLITE_CONFIG_PCACHE2 18 /* sqlite3_pcache_methods2* */
-#define SQLITE_CONFIG_GETPCACHE2 19 /* sqlite3_pcache_methods2* */
-#define SQLITE_CONFIG_COVERING_INDEX_SCAN 20 /* int */
-#define SQLITE_CONFIG_SQLLOG 21 /* xSqllog, void* */
-#define SQLITE_CONFIG_MMAP_SIZE 22 /* sqlite3_int64, sqlite3_int64 */
-#define SQLITE_CONFIG_WIN32_HEAPSIZE 23 /* int nByte */
-#define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */
-#define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */
-#define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */
-
-/*
-** CAPI3REF: Database Connection Configuration Options
-**
-** These constants are the available integer configuration options that
-** can be passed as the second argument to the [sqlite3_db_config()] interface.
-**
-** New configuration options may be added in future releases of SQLite.
-** Existing configuration options might be discontinued. Applications
-** should check the return code from [sqlite3_db_config()] to make sure that
-** the call worked. ^The [sqlite3_db_config()] interface will return a
-** non-zero [error code] if a discontinued or unsupported configuration option
-** is invoked.
-**
-**
-** - SQLITE_DBCONFIG_LOOKASIDE
-** - ^This option takes three additional arguments that determine the
-** [lookaside memory allocator] configuration for the [database connection].
-** ^The first argument (the third parameter to [sqlite3_db_config()] is a
-** pointer to a memory buffer to use for lookaside memory.
-** ^The first argument after the SQLITE_DBCONFIG_LOOKASIDE verb
-** may be NULL in which case SQLite will allocate the
-** lookaside buffer itself using [sqlite3_malloc()]. ^The second argument is the
-** size of each lookaside buffer slot. ^The third argument is the number of
-** slots. The size of the buffer in the first argument must be greater than
-** or equal to the product of the second and third arguments. The buffer
-** must be aligned to an 8-byte boundary. ^If the second argument to
-** SQLITE_DBCONFIG_LOOKASIDE is not a multiple of 8, it is internally
-** rounded down to the next smaller multiple of 8. ^(The lookaside memory
-** configuration for a database connection can only be changed when that
-** connection is not currently using lookaside memory, or in other words
-** when the "current value" returned by
-** [sqlite3_db_status](D,[SQLITE_CONFIG_LOOKASIDE],...) is zero.
-** Any attempt to change the lookaside memory configuration when lookaside
-** memory is in use leaves the configuration unchanged and returns
-** [SQLITE_BUSY].)^
-**
-** - SQLITE_DBCONFIG_ENABLE_FKEY
-** - ^This option is used to enable or disable the enforcement of
-** [foreign key constraints]. There should be two additional arguments.
-** The first argument is an integer which is 0 to disable FK enforcement,
-** positive to enable FK enforcement or negative to leave FK enforcement
-** unchanged. The second parameter is a pointer to an integer into which
-** is written 0 or 1 to indicate whether FK enforcement is off or on
-** following this call. The second parameter may be a NULL pointer, in
-** which case the FK enforcement setting is not reported back.
-**
-** - SQLITE_DBCONFIG_ENABLE_TRIGGER
-** - ^This option is used to enable or disable [CREATE TRIGGER | triggers].
-** There should be two additional arguments.
-** The first argument is an integer which is 0 to disable triggers,
-** positive to enable triggers or negative to leave the setting unchanged.
-** The second parameter is a pointer to an integer into which
-** is written 0 or 1 to indicate whether triggers are disabled or enabled
-** following this call. The second parameter may be a NULL pointer, in
-** which case the trigger setting is not reported back.
-**
-** - SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER
-** - ^This option is used to enable or disable the two-argument
-** version of the [fts3_tokenizer()] function which is part of the
-** [FTS3] full-text search engine extension.
-** There should be two additional arguments.
-** The first argument is an integer which is 0 to disable fts3_tokenizer() or
-** positive to enable fts3_tokenizer() or negative to leave the setting
-** unchanged.
-** The second parameter is a pointer to an integer into which
-** is written 0 or 1 to indicate whether fts3_tokenizer is disabled or enabled
-** following this call. The second parameter may be a NULL pointer, in
-** which case the new setting is not reported back.
-**
-** - SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION
-** - ^This option is used to enable or disable the [sqlite3_load_extension()]
-** interface independently of the [load_extension()] SQL function.
-** The [sqlite3_enable_load_extension()] API enables or disables both the
-** C-API [sqlite3_load_extension()] and the SQL function [load_extension()].
-** There should be two additional arguments.
-** When the first argument to this interface is 1, then only the C-API is
-** enabled and the SQL function remains disabled. If the first argment to
-** this interface is 0, then both the C-API and the SQL function are disabled.
-** If the first argument is -1, then no changes are made to state of either the
-** C-API or the SQL function.
-** The second parameter is a pointer to an integer into which
-** is written 0 or 1 to indicate whether [sqlite3_load_extension()] interface
-** is disabled or enabled following this call. The second parameter may
-** be a NULL pointer, in which case the new setting is not reported back.
-**
-**
-**
-*/
-#define SQLITE_DBCONFIG_LOOKASIDE 1001 /* void* int int */
-#define SQLITE_DBCONFIG_ENABLE_FKEY 1002 /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_TRIGGER 1003 /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */
-#define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */
-
-
-/*
-** CAPI3REF: Enable Or Disable Extended Result Codes
-** METHOD: sqlite3
-**
-** ^The sqlite3_extended_result_codes() routine enables or disables the
-** [extended result codes] feature of SQLite. ^The extended result
-** codes are disabled by default for historical compatibility.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_result_codes(sqlite3*, int onoff);
-
-/*
-** CAPI3REF: Last Insert Rowid
-** METHOD: sqlite3
-**
-** ^Each entry in most SQLite tables (except for [WITHOUT ROWID] tables)
-** has a unique 64-bit signed
-** integer key called the [ROWID | "rowid"]. ^The rowid is always available
-** as an undeclared column named ROWID, OID, or _ROWID_ as long as those
-** names are not also used by explicitly declared columns. ^If
-** the table has a column of type [INTEGER PRIMARY KEY] then that column
-** is another alias for the rowid.
-**
-** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the
-** most recent successful [INSERT] into a rowid table or [virtual table]
-** on database connection D.
-** ^Inserts into [WITHOUT ROWID] tables are not recorded.
-** ^If no successful [INSERT]s into rowid tables
-** have ever occurred on the database connection D,
-** then sqlite3_last_insert_rowid(D) returns zero.
-**
-** ^(If an [INSERT] occurs within a trigger or within a [virtual table]
-** method, then this routine will return the [rowid] of the inserted
-** row as long as the trigger or virtual table method is running.
-** But once the trigger or virtual table method ends, the value returned
-** by this routine reverts to what it was before the trigger or virtual
-** table method began.)^
-**
-** ^An [INSERT] that fails due to a constraint violation is not a
-** successful [INSERT] and does not change the value returned by this
-** routine. ^Thus INSERT OR FAIL, INSERT OR IGNORE, INSERT OR ROLLBACK,
-** and INSERT OR ABORT make no changes to the return value of this
-** routine when their insertion fails. ^(When INSERT OR REPLACE
-** encounters a constraint violation, it does not fail. The
-** INSERT continues to completion after deleting rows that caused
-** the constraint problem so INSERT OR REPLACE will always change
-** the return value of this interface.)^
-**
-** ^For the purposes of this routine, an [INSERT] is considered to
-** be successful even if it is subsequently rolled back.
-**
-** This function is accessible to SQL statements via the
-** [last_insert_rowid() SQL function].
-**
-** If a separate thread performs a new [INSERT] on the same
-** database connection while the [sqlite3_last_insert_rowid()]
-** function is running and thus changes the last insert [rowid],
-** then the value returned by [sqlite3_last_insert_rowid()] is
-** unpredictable and might not equal either the old or the new
-** last insert [rowid].
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_last_insert_rowid(sqlite3*);
-
-/*
-** CAPI3REF: Count The Number Of Rows Modified
-** METHOD: sqlite3
-**
-** ^This function returns the number of rows modified, inserted or
-** deleted by the most recently completed INSERT, UPDATE or DELETE
-** statement on the database connection specified by the only parameter.
-** ^Executing any other type of SQL statement does not modify the value
-** returned by this function.
-**
-** ^Only changes made directly by the INSERT, UPDATE or DELETE statement are
-** considered - auxiliary changes caused by [CREATE TRIGGER | triggers],
-** [foreign key actions] or [REPLACE] constraint resolution are not counted.
-**
-** Changes to a view that are intercepted by
-** [INSTEAD OF trigger | INSTEAD OF triggers] are not counted. ^The value
-** returned by sqlite3_changes() immediately after an INSERT, UPDATE or
-** DELETE statement run on a view is always zero. Only changes made to real
-** tables are counted.
-**
-** Things are more complicated if the sqlite3_changes() function is
-** executed while a trigger program is running. This may happen if the
-** program uses the [changes() SQL function], or if some other callback
-** function invokes sqlite3_changes() directly. Essentially:
-**
-**
-** - ^(Before entering a trigger program the value returned by
-** sqlite3_changes() function is saved. After the trigger program
-** has finished, the original value is restored.)^
-**
-**
- ^(Within a trigger program each INSERT, UPDATE and DELETE
-** statement sets the value returned by sqlite3_changes()
-** upon completion as normal. Of course, this value will not include
-** any changes performed by sub-triggers, as the sqlite3_changes()
-** value will be saved and restored after each sub-trigger has run.)^
-**
-**
-** ^This means that if the changes() SQL function (or similar) is used
-** by the first INSERT, UPDATE or DELETE statement within a trigger, it
-** returns the value as set when the calling statement began executing.
-** ^If it is used by the second or subsequent such statement within a trigger
-** program, the value returned reflects the number of rows modified by the
-** previous INSERT, UPDATE or DELETE statement within the same trigger.
-**
-** See also the [sqlite3_total_changes()] interface, the
-** [count_changes pragma], and the [changes() SQL function].
-**
-** If a separate thread makes changes on the same database connection
-** while [sqlite3_changes()] is running then the value returned
-** is unpredictable and not meaningful.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_changes(sqlite3*);
-
-/*
-** CAPI3REF: Total Number Of Rows Modified
-** METHOD: sqlite3
-**
-** ^This function returns the total number of rows inserted, modified or
-** deleted by all [INSERT], [UPDATE] or [DELETE] statements completed
-** since the database connection was opened, including those executed as
-** part of trigger programs. ^Executing any other type of SQL statement
-** does not affect the value returned by sqlite3_total_changes().
-**
-** ^Changes made as part of [foreign key actions] are included in the
-** count, but those made as part of REPLACE constraint resolution are
-** not. ^Changes to a view that are intercepted by INSTEAD OF triggers
-** are not counted.
-**
-** See also the [sqlite3_changes()] interface, the
-** [count_changes pragma], and the [total_changes() SQL function].
-**
-** If a separate thread makes changes on the same database connection
-** while [sqlite3_total_changes()] is running then the value
-** returned is unpredictable and not meaningful.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_total_changes(sqlite3*);
-
-/*
-** CAPI3REF: Interrupt A Long-Running Query
-** METHOD: sqlite3
-**
-** ^This function causes any pending database operation to abort and
-** return at its earliest opportunity. This routine is typically
-** called in response to a user action such as pressing "Cancel"
-** or Ctrl-C where the user wants a long query operation to halt
-** immediately.
-**
-** ^It is safe to call this routine from a thread different from the
-** thread that is currently running the database operation. But it
-** is not safe to call this routine with a [database connection] that
-** is closed or might close before sqlite3_interrupt() returns.
-**
-** ^If an SQL operation is very nearly finished at the time when
-** sqlite3_interrupt() is called, then it might not have an opportunity
-** to be interrupted and might continue to completion.
-**
-** ^An SQL operation that is interrupted will return [SQLITE_INTERRUPT].
-** ^If the interrupted SQL operation is an INSERT, UPDATE, or DELETE
-** that is inside an explicit transaction, then the entire transaction
-** will be rolled back automatically.
-**
-** ^The sqlite3_interrupt(D) call is in effect until all currently running
-** SQL statements on [database connection] D complete. ^Any new SQL statements
-** that are started after the sqlite3_interrupt() call and before the
-** running statements reaches zero are interrupted as if they had been
-** running prior to the sqlite3_interrupt() call. ^New SQL statements
-** that are started after the running statement count reaches zero are
-** not effected by the sqlite3_interrupt().
-** ^A call to sqlite3_interrupt(D) that occurs when there are no running
-** SQL statements is a no-op and has no effect on SQL statements
-** that are started after the sqlite3_interrupt() call returns.
-**
-** If the database connection closes while [sqlite3_interrupt()]
-** is running then bad things will likely happen.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_interrupt(sqlite3*);
-
-/*
-** CAPI3REF: Determine If An SQL Statement Is Complete
-**
-** These routines are useful during command-line input to determine if the
-** currently entered text seems to form a complete SQL statement or
-** if additional input is needed before sending the text into
-** SQLite for parsing. ^These routines return 1 if the input string
-** appears to be a complete SQL statement. ^A statement is judged to be
-** complete if it ends with a semicolon token and is not a prefix of a
-** well-formed CREATE TRIGGER statement. ^Semicolons that are embedded within
-** string literals or quoted identifier names or comments are not
-** independent tokens (they are part of the token in which they are
-** embedded) and thus do not count as a statement terminator. ^Whitespace
-** and comments that follow the final semicolon are ignored.
-**
-** ^These routines return 0 if the statement is incomplete. ^If a
-** memory allocation fails, then SQLITE_NOMEM is returned.
-**
-** ^These routines do not parse the SQL statements thus
-** will not detect syntactically incorrect SQL.
-**
-** ^(If SQLite has not been initialized using [sqlite3_initialize()] prior
-** to invoking sqlite3_complete16() then sqlite3_initialize() is invoked
-** automatically by sqlite3_complete16(). If that initialization fails,
-** then the return value from sqlite3_complete16() will be non-zero
-** regardless of whether or not the input SQL is complete.)^
-**
-** The input to [sqlite3_complete()] must be a zero-terminated
-** UTF-8 string.
-**
-** The input to [sqlite3_complete16()] must be a zero-terminated
-** UTF-16 string in native byte order.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_complete(const char *sql);
-SQLITE_API int SQLITE_STDCALL sqlite3_complete16(const void *sql);
-
-/*
-** CAPI3REF: Register A Callback To Handle SQLITE_BUSY Errors
-** KEYWORDS: {busy-handler callback} {busy handler}
-** METHOD: sqlite3
-**
-** ^The sqlite3_busy_handler(D,X,P) routine sets a callback function X
-** that might be invoked with argument P whenever
-** an attempt is made to access a database table associated with
-** [database connection] D when another thread
-** or process has the table locked.
-** The sqlite3_busy_handler() interface is used to implement
-** [sqlite3_busy_timeout()] and [PRAGMA busy_timeout].
-**
-** ^If the busy callback is NULL, then [SQLITE_BUSY]
-** is returned immediately upon encountering the lock. ^If the busy callback
-** is not NULL, then the callback might be invoked with two arguments.
-**
-** ^The first argument to the busy handler is a copy of the void* pointer which
-** is the third argument to sqlite3_busy_handler(). ^The second argument to
-** the busy handler callback is the number of times that the busy handler has
-** been invoked previously for the same locking event. ^If the
-** busy callback returns 0, then no additional attempts are made to
-** access the database and [SQLITE_BUSY] is returned
-** to the application.
-** ^If the callback returns non-zero, then another attempt
-** is made to access the database and the cycle repeats.
-**
-** The presence of a busy handler does not guarantee that it will be invoked
-** when there is lock contention. ^If SQLite determines that invoking the busy
-** handler could result in a deadlock, it will go ahead and return [SQLITE_BUSY]
-** to the application instead of invoking the
-** busy handler.
-** Consider a scenario where one process is holding a read lock that
-** it is trying to promote to a reserved lock and
-** a second process is holding a reserved lock that it is trying
-** to promote to an exclusive lock. The first process cannot proceed
-** because it is blocked by the second and the second process cannot
-** proceed because it is blocked by the first. If both processes
-** invoke the busy handlers, neither will make any progress. Therefore,
-** SQLite returns [SQLITE_BUSY] for the first process, hoping that this
-** will induce the first process to release its read lock and allow
-** the second process to proceed.
-**
-** ^The default busy callback is NULL.
-**
-** ^(There can only be a single busy handler defined for each
-** [database connection]. Setting a new busy handler clears any
-** previously set handler.)^ ^Note that calling [sqlite3_busy_timeout()]
-** or evaluating [PRAGMA busy_timeout=N] will change the
-** busy handler and thus clear any previously set busy handler.
-**
-** The busy callback should not take any actions which modify the
-** database connection that invoked the busy handler. In other words,
-** the busy handler is not reentrant. Any such actions
-** result in undefined behavior.
-**
-** A busy handler must not close the database connection
-** or [prepared statement] that invoked the busy handler.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_handler(sqlite3*, int(*)(void*,int), void*);
-
-/*
-** CAPI3REF: Set A Busy Timeout
-** METHOD: sqlite3
-**
-** ^This routine sets a [sqlite3_busy_handler | busy handler] that sleeps
-** for a specified amount of time when a table is locked. ^The handler
-** will sleep multiple times until at least "ms" milliseconds of sleeping
-** have accumulated. ^After at least "ms" milliseconds of sleeping,
-** the handler returns 0 which causes [sqlite3_step()] to return
-** [SQLITE_BUSY].
-**
-** ^Calling this routine with an argument less than or equal to zero
-** turns off all busy handlers.
-**
-** ^(There can only be a single busy handler for a particular
-** [database connection] at any given moment. If another busy handler
-** was defined (using [sqlite3_busy_handler()]) prior to calling
-** this routine, that other busy handler is cleared.)^
-**
-** See also: [PRAGMA busy_timeout]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_busy_timeout(sqlite3*, int ms);
-
-/*
-** CAPI3REF: Convenience Routines For Running Queries
-** METHOD: sqlite3
-**
-** This is a legacy interface that is preserved for backwards compatibility.
-** Use of this interface is not recommended.
-**
-** Definition: A result table is memory data structure created by the
-** [sqlite3_get_table()] interface. A result table records the
-** complete query results from one or more queries.
-**
-** The table conceptually has a number of rows and columns. But
-** these numbers are not part of the result table itself. These
-** numbers are obtained separately. Let N be the number of rows
-** and M be the number of columns.
-**
-** A result table is an array of pointers to zero-terminated UTF-8 strings.
-** There are (N+1)*M elements in the array. The first M pointers point
-** to zero-terminated strings that contain the names of the columns.
-** The remaining entries all point to query results. NULL values result
-** in NULL pointers. All other values are in their UTF-8 zero-terminated
-** string representation as returned by [sqlite3_column_text()].
-**
-** A result table might consist of one or more memory allocations.
-** It is not safe to pass a result table directly to [sqlite3_free()].
-** A result table should be deallocated using [sqlite3_free_table()].
-**
-** ^(As an example of the result table format, suppose a query result
-** is as follows:
-**
-**
-** Name | Age
-** -----------------------
-** Alice | 43
-** Bob | 28
-** Cindy | 21
-**
-**
-** There are two column (M==2) and three rows (N==3). Thus the
-** result table has 8 entries. Suppose the result table is stored
-** in an array names azResult. Then azResult holds this content:
-**
-**
-** azResult[0] = "Name";
-** azResult[1] = "Age";
-** azResult[2] = "Alice";
-** azResult[3] = "43";
-** azResult[4] = "Bob";
-** azResult[5] = "28";
-** azResult[6] = "Cindy";
-** azResult[7] = "21";
-**
)^
-**
-** ^The sqlite3_get_table() function evaluates one or more
-** semicolon-separated SQL statements in the zero-terminated UTF-8
-** string of its 2nd parameter and returns a result table to the
-** pointer given in its 3rd parameter.
-**
-** After the application has finished with the result from sqlite3_get_table(),
-** it must pass the result table pointer to sqlite3_free_table() in order to
-** release the memory that was malloced. Because of the way the
-** [sqlite3_malloc()] happens within sqlite3_get_table(), the calling
-** function must not try to call [sqlite3_free()] directly. Only
-** [sqlite3_free_table()] is able to release the memory properly and safely.
-**
-** The sqlite3_get_table() interface is implemented as a wrapper around
-** [sqlite3_exec()]. The sqlite3_get_table() routine does not have access
-** to any internal data structures of SQLite. It uses only the public
-** interface defined here. As a consequence, errors that occur in the
-** wrapper layer outside of the internal [sqlite3_exec()] call are not
-** reflected in subsequent calls to [sqlite3_errcode()] or
-** [sqlite3_errmsg()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_table(
- sqlite3 *db, /* An open database */
- const char *zSql, /* SQL to be evaluated */
- char ***pazResult, /* Results of the query */
- int *pnRow, /* Number of result rows written here */
- int *pnColumn, /* Number of result columns written here */
- char **pzErrmsg /* Error msg written here */
-);
-SQLITE_API void SQLITE_STDCALL sqlite3_free_table(char **result);
-
-/*
-** CAPI3REF: Formatted String Printing Functions
-**
-** These routines are work-alikes of the "printf()" family of functions
-** from the standard C library.
-** These routines understand most of the common K&R formatting options,
-** plus some additional non-standard formats, detailed below.
-** Note that some of the more obscure formatting options from recent
-** C-library standards are omitted from this implementation.
-**
-** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their
-** results into memory obtained from [sqlite3_malloc()].
-** The strings returned by these two routines should be
-** released by [sqlite3_free()]. ^Both routines return a
-** NULL pointer if [sqlite3_malloc()] is unable to allocate enough
-** memory to hold the resulting string.
-**
-** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from
-** the standard C library. The result is written into the
-** buffer supplied as the second parameter whose size is given by
-** the first parameter. Note that the order of the
-** first two parameters is reversed from snprintf().)^ This is an
-** historical accident that cannot be fixed without breaking
-** backwards compatibility. ^(Note also that sqlite3_snprintf()
-** returns a pointer to its buffer instead of the number of
-** characters actually written into the buffer.)^ We admit that
-** the number of characters written would be a more useful return
-** value but we cannot change the implementation of sqlite3_snprintf()
-** now without breaking compatibility.
-**
-** ^As long as the buffer size is greater than zero, sqlite3_snprintf()
-** guarantees that the buffer is always zero-terminated. ^The first
-** parameter "n" is the total size of the buffer, including space for
-** the zero terminator. So the longest string that can be completely
-** written will be n-1 characters.
-**
-** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf().
-**
-** These routines all implement some additional formatting
-** options that are useful for constructing SQL statements.
-** All of the usual printf() formatting options apply. In addition, there
-** is are "%q", "%Q", "%w" and "%z" options.
-**
-** ^(The %q option works like %s in that it substitutes a nul-terminated
-** string from the argument list. But %q also doubles every '\'' character.
-** %q is designed for use inside a string literal.)^ By doubling each '\''
-** character it escapes that character and allows it to be inserted into
-** the string.
-**
-** For example, assume the string variable zText contains text as follows:
-**
-**
-** char *zText = "It's a happy day!";
-**
-**
-** One can use this text in an SQL statement as follows:
-**
-**
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-**
-**
-** Because the %q format string is used, the '\'' character in zText
-** is escaped and the SQL generated is as follows:
-**
-**
-** INSERT INTO table1 VALUES('It''s a happy day!')
-**
-**
-** This is correct. Had we used %s instead of %q, the generated SQL
-** would have looked like this:
-**
-**
-** INSERT INTO table1 VALUES('It's a happy day!');
-**
-**
-** This second example is an SQL syntax error. As a general rule you should
-** always use %q instead of %s when inserting text into a string literal.
-**
-** ^(The %Q option works like %q except it also adds single quotes around
-** the outside of the total string. Additionally, if the parameter in the
-** argument list is a NULL pointer, %Q substitutes the text "NULL" (without
-** single quotes).)^ So, for example, one could say:
-**
-**
-** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText);
-** sqlite3_exec(db, zSQL, 0, 0, 0);
-** sqlite3_free(zSQL);
-**
-**
-** The code above will render a correct SQL statement in the zSQL
-** variable even if the zText variable is a NULL pointer.
-**
-** ^(The "%w" formatting option is like "%q" except that it expects to
-** be contained within double-quotes instead of single quotes, and it
-** escapes the double-quote character instead of the single-quote
-** character.)^ The "%w" formatting option is intended for safely inserting
-** table and column names into a constructed SQL statement.
-**
-** ^(The "%z" formatting option works like "%s" but with the
-** addition that after the string has been read and copied into
-** the result, [sqlite3_free()] is called on the input string.)^
-*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char*,...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char*, va_list);
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int,char*,const char*, ...);
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int,char*,const char*, va_list);
-
-/*
-** CAPI3REF: Memory Allocation Subsystem
-**
-** The SQLite core uses these three routines for all of its own
-** internal memory allocation needs. "Core" in the previous sentence
-** does not include operating-system specific VFS implementation. The
-** Windows VFS uses native malloc() and free() for some operations.
-**
-** ^The sqlite3_malloc() routine returns a pointer to a block
-** of memory at least N bytes in length, where N is the parameter.
-** ^If sqlite3_malloc() is unable to obtain sufficient free
-** memory, it returns a NULL pointer. ^If the parameter N to
-** sqlite3_malloc() is zero or negative then sqlite3_malloc() returns
-** a NULL pointer.
-**
-** ^The sqlite3_malloc64(N) routine works just like
-** sqlite3_malloc(N) except that N is an unsigned 64-bit integer instead
-** of a signed 32-bit integer.
-**
-** ^Calling sqlite3_free() with a pointer previously returned
-** by sqlite3_malloc() or sqlite3_realloc() releases that memory so
-** that it might be reused. ^The sqlite3_free() routine is
-** a no-op if is called with a NULL pointer. Passing a NULL pointer
-** to sqlite3_free() is harmless. After being freed, memory
-** should neither be read nor written. Even reading previously freed
-** memory might result in a segmentation fault or other severe error.
-** Memory corruption, a segmentation fault, or other severe error
-** might result if sqlite3_free() is called with a non-NULL pointer that
-** was not obtained from sqlite3_malloc() or sqlite3_realloc().
-**
-** ^The sqlite3_realloc(X,N) interface attempts to resize a
-** prior memory allocation X to be at least N bytes.
-** ^If the X parameter to sqlite3_realloc(X,N)
-** is a NULL pointer then its behavior is identical to calling
-** sqlite3_malloc(N).
-** ^If the N parameter to sqlite3_realloc(X,N) is zero or
-** negative then the behavior is exactly the same as calling
-** sqlite3_free(X).
-** ^sqlite3_realloc(X,N) returns a pointer to a memory allocation
-** of at least N bytes in size or NULL if insufficient memory is available.
-** ^If M is the size of the prior allocation, then min(N,M) bytes
-** of the prior allocation are copied into the beginning of buffer returned
-** by sqlite3_realloc(X,N) and the prior allocation is freed.
-** ^If sqlite3_realloc(X,N) returns NULL and N is positive, then the
-** prior allocation is not freed.
-**
-** ^The sqlite3_realloc64(X,N) interfaces works the same as
-** sqlite3_realloc(X,N) except that N is a 64-bit unsigned integer instead
-** of a 32-bit signed integer.
-**
-** ^If X is a memory allocation previously obtained from sqlite3_malloc(),
-** sqlite3_malloc64(), sqlite3_realloc(), or sqlite3_realloc64(), then
-** sqlite3_msize(X) returns the size of that memory allocation in bytes.
-** ^The value returned by sqlite3_msize(X) might be larger than the number
-** of bytes requested when X was allocated. ^If X is a NULL pointer then
-** sqlite3_msize(X) returns zero. If X points to something that is not
-** the beginning of memory allocation, or if it points to a formerly
-** valid memory allocation that has now been freed, then the behavior
-** of sqlite3_msize(X) is undefined and possibly harmful.
-**
-** ^The memory returned by sqlite3_malloc(), sqlite3_realloc(),
-** sqlite3_malloc64(), and sqlite3_realloc64()
-** is always aligned to at least an 8 byte boundary, or to a
-** 4 byte boundary if the [SQLITE_4_BYTE_ALIGNED_MALLOC] compile-time
-** option is used.
-**
-** In SQLite version 3.5.0 and 3.5.1, it was possible to define
-** the SQLITE_OMIT_MEMORY_ALLOCATION which would cause the built-in
-** implementation of these routines to be omitted. That capability
-** is no longer provided. Only built-in memory allocators can be used.
-**
-** Prior to SQLite version 3.7.10, the Windows OS interface layer called
-** the system malloc() and free() directly when converting
-** filenames between the UTF-8 encoding used by SQLite
-** and whatever filename encoding is used by the particular Windows
-** installation. Memory allocation errors were detected, but
-** they were reported back as [SQLITE_CANTOPEN] or
-** [SQLITE_IOERR] rather than [SQLITE_NOMEM].
-**
-** The pointer arguments to [sqlite3_free()] and [sqlite3_realloc()]
-** must be either NULL or else pointers obtained from a prior
-** invocation of [sqlite3_malloc()] or [sqlite3_realloc()] that have
-** not yet been released.
-**
-** The application must not read or write any part of
-** a block of memory after it has been released using
-** [sqlite3_free()] or [sqlite3_realloc()].
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void*, int);
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void*, sqlite3_uint64);
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void*);
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void*);
-
-/*
-** CAPI3REF: Memory Allocator Statistics
-**
-** SQLite provides these two interfaces for reporting on the status
-** of the [sqlite3_malloc()], [sqlite3_free()], and [sqlite3_realloc()]
-** routines, which form the built-in memory allocation subsystem.
-**
-** ^The [sqlite3_memory_used()] routine returns the number of bytes
-** of memory currently outstanding (malloced but not freed).
-** ^The [sqlite3_memory_highwater()] routine returns the maximum
-** value of [sqlite3_memory_used()] since the high-water mark
-** was last reset. ^The values returned by [sqlite3_memory_used()] and
-** [sqlite3_memory_highwater()] include any overhead
-** added by SQLite in its implementation of [sqlite3_malloc()],
-** but not overhead added by the any underlying system library
-** routines that [sqlite3_malloc()] may call.
-**
-** ^The memory high-water mark is reset to the current value of
-** [sqlite3_memory_used()] if and only if the parameter to
-** [sqlite3_memory_highwater()] is true. ^The value returned
-** by [sqlite3_memory_highwater(1)] is the high-water mark
-** prior to the reset.
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag);
-
-/*
-** CAPI3REF: Pseudo-Random Number Generator
-**
-** SQLite contains a high-quality pseudo-random number generator (PRNG) used to
-** select random [ROWID | ROWIDs] when inserting new records into a table that
-** already uses the largest possible [ROWID]. The PRNG is also used for
-** the build-in random() and randomblob() SQL functions. This interface allows
-** applications to access the same PRNG for other purposes.
-**
-** ^A call to this routine stores N bytes of randomness into buffer P.
-** ^The P parameter can be a NULL pointer.
-**
-** ^If this routine has not been previously called or if the previous
-** call had N less than one or a NULL pointer for P, then the PRNG is
-** seeded using randomness obtained from the xRandomness method of
-** the default [sqlite3_vfs] object.
-** ^If the previous call to this routine had an N of 1 or more and a
-** non-NULL P then the pseudo-randomness is generated
-** internally and without recourse to the [sqlite3_vfs] xRandomness
-** method.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *P);
-
-/*
-** CAPI3REF: Compile-Time Authorization Callbacks
-** METHOD: sqlite3
-**
-** ^This routine registers an authorizer callback with a particular
-** [database connection], supplied in the first argument.
-** ^The authorizer callback is invoked as SQL statements are being compiled
-** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()],
-** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various
-** points during the compilation process, as logic is being created
-** to perform various actions, the authorizer callback is invoked to
-** see if those actions are allowed. ^The authorizer callback should
-** return [SQLITE_OK] to allow the action, [SQLITE_IGNORE] to disallow the
-** specific action but allow the SQL statement to continue to be
-** compiled, or [SQLITE_DENY] to cause the entire SQL statement to be
-** rejected with an error. ^If the authorizer callback returns
-** any value other than [SQLITE_IGNORE], [SQLITE_OK], or [SQLITE_DENY]
-** then the [sqlite3_prepare_v2()] or equivalent call that triggered
-** the authorizer will fail with an error message.
-**
-** When the callback returns [SQLITE_OK], that means the operation
-** requested is ok. ^When the callback returns [SQLITE_DENY], the
-** [sqlite3_prepare_v2()] or equivalent call that triggered the
-** authorizer will fail with an error message explaining that
-** access is denied.
-**
-** ^The first parameter to the authorizer callback is a copy of the third
-** parameter to the sqlite3_set_authorizer() interface. ^The second parameter
-** to the callback is an integer [SQLITE_COPY | action code] that specifies
-** the particular action to be authorized. ^The third through sixth parameters
-** to the callback are zero-terminated strings that contain additional
-** details about the action to be authorized.
-**
-** ^If the action code is [SQLITE_READ]
-** and the callback returns [SQLITE_IGNORE] then the
-** [prepared statement] statement is constructed to substitute
-** a NULL value in place of the table column that would have
-** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE]
-** return can be used to deny an untrusted user access to individual
-** columns of a table.
-** ^If the action code is [SQLITE_DELETE] and the callback returns
-** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the
-** [truncate optimization] is disabled and all rows are deleted individually.
-**
-** An authorizer is used when [sqlite3_prepare | preparing]
-** SQL statements from an untrusted source, to ensure that the SQL statements
-** do not try to access data they are not allowed to see, or that they do not
-** try to execute malicious statements that damage the database. For
-** example, an application may allow a user to enter arbitrary
-** SQL queries for evaluation by a database. But the application does
-** not want the user to be able to make arbitrary changes to the
-** database. An authorizer could then be put in place while the
-** user-entered SQL is being [sqlite3_prepare | prepared] that
-** disallows everything except [SELECT] statements.
-**
-** Applications that need to process SQL from untrusted sources
-** might also consider lowering resource limits using [sqlite3_limit()]
-** and limiting database size using the [max_page_count] [PRAGMA]
-** in addition to using an authorizer.
-**
-** ^(Only a single authorizer can be in place on a database connection
-** at a time. Each call to sqlite3_set_authorizer overrides the
-** previous call.)^ ^Disable the authorizer by installing a NULL callback.
-** The authorizer is disabled by default.
-**
-** The authorizer callback must not do anything that will modify
-** the database connection that invoked the authorizer callback.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** ^When [sqlite3_prepare_v2()] is used to prepare a statement, the
-** statement might be re-prepared during [sqlite3_step()] due to a
-** schema change. Hence, the application should ensure that the
-** correct authorizer callback remains in place during the [sqlite3_step()].
-**
-** ^Note that the authorizer callback is invoked only during
-** [sqlite3_prepare()] or its variants. Authorization is not
-** performed during statement evaluation in [sqlite3_step()], unless
-** as stated in the previous paragraph, sqlite3_step() invokes
-** sqlite3_prepare_v2() to reprepare a statement after a schema change.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_set_authorizer(
- sqlite3*,
- int (*xAuth)(void*,int,const char*,const char*,const char*,const char*),
- void *pUserData
-);
-
-/*
-** CAPI3REF: Authorizer Return Codes
-**
-** The [sqlite3_set_authorizer | authorizer callback function] must
-** return either [SQLITE_OK] or one of these two constants in order
-** to signal SQLite whether or not the action is permitted. See the
-** [sqlite3_set_authorizer | authorizer documentation] for additional
-** information.
-**
-** Note that SQLITE_IGNORE is also used as a [conflict resolution mode]
-** returned from the [sqlite3_vtab_on_conflict()] interface.
-*/
-#define SQLITE_DENY 1 /* Abort the SQL statement with an error */
-#define SQLITE_IGNORE 2 /* Don't allow access, but don't generate an error */
-
-/*
-** CAPI3REF: Authorizer Action Codes
-**
-** The [sqlite3_set_authorizer()] interface registers a callback function
-** that is invoked to authorize certain SQL statement actions. The
-** second parameter to the callback is an integer code that specifies
-** what action is being authorized. These are the integer action codes that
-** the authorizer callback may be passed.
-**
-** These action code values signify what kind of operation is to be
-** authorized. The 3rd and 4th parameters to the authorization
-** callback function will be parameters or NULL depending on which of these
-** codes is used as the second parameter. ^(The 5th parameter to the
-** authorizer callback is the name of the database ("main", "temp",
-** etc.) if applicable.)^ ^The 6th parameter to the authorizer callback
-** is the name of the inner-most trigger or view that is responsible for
-** the access attempt or NULL if this access attempt is directly from
-** top-level SQL code.
-*/
-/******************************************* 3rd ************ 4th ***********/
-#define SQLITE_CREATE_INDEX 1 /* Index Name Table Name */
-#define SQLITE_CREATE_TABLE 2 /* Table Name NULL */
-#define SQLITE_CREATE_TEMP_INDEX 3 /* Index Name Table Name */
-#define SQLITE_CREATE_TEMP_TABLE 4 /* Table Name NULL */
-#define SQLITE_CREATE_TEMP_TRIGGER 5 /* Trigger Name Table Name */
-#define SQLITE_CREATE_TEMP_VIEW 6 /* View Name NULL */
-#define SQLITE_CREATE_TRIGGER 7 /* Trigger Name Table Name */
-#define SQLITE_CREATE_VIEW 8 /* View Name NULL */
-#define SQLITE_DELETE 9 /* Table Name NULL */
-#define SQLITE_DROP_INDEX 10 /* Index Name Table Name */
-#define SQLITE_DROP_TABLE 11 /* Table Name NULL */
-#define SQLITE_DROP_TEMP_INDEX 12 /* Index Name Table Name */
-#define SQLITE_DROP_TEMP_TABLE 13 /* Table Name NULL */
-#define SQLITE_DROP_TEMP_TRIGGER 14 /* Trigger Name Table Name */
-#define SQLITE_DROP_TEMP_VIEW 15 /* View Name NULL */
-#define SQLITE_DROP_TRIGGER 16 /* Trigger Name Table Name */
-#define SQLITE_DROP_VIEW 17 /* View Name NULL */
-#define SQLITE_INSERT 18 /* Table Name NULL */
-#define SQLITE_PRAGMA 19 /* Pragma Name 1st arg or NULL */
-#define SQLITE_READ 20 /* Table Name Column Name */
-#define SQLITE_SELECT 21 /* NULL NULL */
-#define SQLITE_TRANSACTION 22 /* Operation NULL */
-#define SQLITE_UPDATE 23 /* Table Name Column Name */
-#define SQLITE_ATTACH 24 /* Filename NULL */
-#define SQLITE_DETACH 25 /* Database Name NULL */
-#define SQLITE_ALTER_TABLE 26 /* Database Name Table Name */
-#define SQLITE_REINDEX 27 /* Index Name NULL */
-#define SQLITE_ANALYZE 28 /* Table Name NULL */
-#define SQLITE_CREATE_VTABLE 29 /* Table Name Module Name */
-#define SQLITE_DROP_VTABLE 30 /* Table Name Module Name */
-#define SQLITE_FUNCTION 31 /* NULL Function Name */
-#define SQLITE_SAVEPOINT 32 /* Operation Savepoint Name */
-#define SQLITE_COPY 0 /* No longer used */
-#define SQLITE_RECURSIVE 33 /* NULL NULL */
-
-/*
-** CAPI3REF: Tracing And Profiling Functions
-** METHOD: sqlite3
-**
-** These routines register callback functions that can be used for
-** tracing and profiling the execution of SQL statements.
-**
-** ^The callback function registered by sqlite3_trace() is invoked at
-** various times when an SQL statement is being run by [sqlite3_step()].
-** ^The sqlite3_trace() callback is invoked with a UTF-8 rendering of the
-** SQL statement text as the statement first begins executing.
-** ^(Additional sqlite3_trace() callbacks might occur
-** as each triggered subprogram is entered. The callbacks for triggers
-** contain a UTF-8 SQL comment that identifies the trigger.)^
-**
-** The [SQLITE_TRACE_SIZE_LIMIT] compile-time option can be used to limit
-** the length of [bound parameter] expansion in the output of sqlite3_trace().
-**
-** ^The callback function registered by sqlite3_profile() is invoked
-** as each SQL statement finishes. ^The profile callback contains
-** the original statement text and an estimate of wall-clock time
-** of how long that statement took to run. ^The profile callback
-** time is in units of nanoseconds, however the current implementation
-** is only capable of millisecond resolution so the six least significant
-** digits in the time are meaningless. Future versions of SQLite
-** might provide greater resolution on the profiler callback. The
-** sqlite3_profile() function is considered experimental and is
-** subject to change in future versions of SQLite.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_trace(sqlite3*, void(*xTrace)(void*,const char*), void*);
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_profile(sqlite3*,
- void(*xProfile)(void*,const char*,sqlite3_uint64), void*);
-
-/*
-** CAPI3REF: Query Progress Callbacks
-** METHOD: sqlite3
-**
-** ^The sqlite3_progress_handler(D,N,X,P) interface causes the callback
-** function X to be invoked periodically during long running calls to
-** [sqlite3_exec()], [sqlite3_step()] and [sqlite3_get_table()] for
-** database connection D. An example use for this
-** interface is to keep a GUI updated during a large query.
-**
-** ^The parameter P is passed through as the only parameter to the
-** callback function X. ^The parameter N is the approximate number of
-** [virtual machine instructions] that are evaluated between successive
-** invocations of the callback X. ^If N is less than one then the progress
-** handler is disabled.
-**
-** ^Only a single progress handler may be defined at one time per
-** [database connection]; setting a new progress handler cancels the
-** old one. ^Setting parameter X to NULL disables the progress handler.
-** ^The progress handler is also disabled by setting N to a value less
-** than 1.
-**
-** ^If the progress callback returns non-zero, the operation is
-** interrupted. This feature can be used to implement a
-** "Cancel" button on a GUI progress dialog box.
-**
-** The progress handler callback must not do anything that will modify
-** the database connection that invoked the progress handler.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*);
-
-/*
-** CAPI3REF: Opening A New Database Connection
-** CONSTRUCTOR: sqlite3
-**
-** ^These routines open an SQLite database file as specified by the
-** filename argument. ^The filename argument is interpreted as UTF-8 for
-** sqlite3_open() and sqlite3_open_v2() and as UTF-16 in the native byte
-** order for sqlite3_open16(). ^(A [database connection] handle is usually
-** returned in *ppDb, even if an error occurs. The only exception is that
-** if SQLite is unable to allocate memory to hold the [sqlite3] object,
-** a NULL will be written into *ppDb instead of a pointer to the [sqlite3]
-** object.)^ ^(If the database is opened (and/or created) successfully, then
-** [SQLITE_OK] is returned. Otherwise an [error code] is returned.)^ ^The
-** [sqlite3_errmsg()] or [sqlite3_errmsg16()] routines can be used to obtain
-** an English language description of the error following a failure of any
-** of the sqlite3_open() routines.
-**
-** ^The default encoding will be UTF-8 for databases created using
-** sqlite3_open() or sqlite3_open_v2(). ^The default encoding for databases
-** created using sqlite3_open16() will be UTF-16 in the native byte order.
-**
-** Whether or not an error occurs when it is opened, resources
-** associated with the [database connection] handle should be released by
-** passing it to [sqlite3_close()] when it is no longer required.
-**
-** The sqlite3_open_v2() interface works like sqlite3_open()
-** except that it accepts two additional parameters for additional control
-** over the new database connection. ^(The flags parameter to
-** sqlite3_open_v2() can take one of
-** the following three values, optionally combined with the
-** [SQLITE_OPEN_NOMUTEX], [SQLITE_OPEN_FULLMUTEX], [SQLITE_OPEN_SHAREDCACHE],
-** [SQLITE_OPEN_PRIVATECACHE], and/or [SQLITE_OPEN_URI] flags:)^
-**
-**
-** ^(- [SQLITE_OPEN_READONLY]
-** - The database is opened in read-only mode. If the database does not
-** already exist, an error is returned.
)^
-**
-** ^(- [SQLITE_OPEN_READWRITE]
-** - The database is opened for reading and writing if possible, or reading
-** only if the file is write protected by the operating system. In either
-** case the database must already exist, otherwise an error is returned.
)^
-**
-** ^(- [SQLITE_OPEN_READWRITE] | [SQLITE_OPEN_CREATE]
-** - The database is opened for reading and writing, and is created if
-** it does not already exist. This is the behavior that is always used for
-** sqlite3_open() and sqlite3_open16().
)^
-**
-**
-** If the 3rd parameter to sqlite3_open_v2() is not one of the
-** combinations shown above optionally combined with other
-** [SQLITE_OPEN_READONLY | SQLITE_OPEN_* bits]
-** then the behavior is undefined.
-**
-** ^If the [SQLITE_OPEN_NOMUTEX] flag is set, then the database connection
-** opens in the multi-thread [threading mode] as long as the single-thread
-** mode has not been set at compile-time or start-time. ^If the
-** [SQLITE_OPEN_FULLMUTEX] flag is set then the database connection opens
-** in the serialized [threading mode] unless single-thread was
-** previously selected at compile-time or start-time.
-** ^The [SQLITE_OPEN_SHAREDCACHE] flag causes the database connection to be
-** eligible to use [shared cache mode], regardless of whether or not shared
-** cache is enabled using [sqlite3_enable_shared_cache()]. ^The
-** [SQLITE_OPEN_PRIVATECACHE] flag causes the database connection to not
-** participate in [shared cache mode] even if it is enabled.
-**
-** ^The fourth parameter to sqlite3_open_v2() is the name of the
-** [sqlite3_vfs] object that defines the operating system interface that
-** the new database connection should use. ^If the fourth parameter is
-** a NULL pointer then the default [sqlite3_vfs] object is used.
-**
-** ^If the filename is ":memory:", then a private, temporary in-memory database
-** is created for the connection. ^This in-memory database will vanish when
-** the database connection is closed. Future versions of SQLite might
-** make use of additional special filenames that begin with the ":" character.
-** It is recommended that when a database filename actually does begin with
-** a ":" character you should prefix the filename with a pathname such as
-** "./" to avoid ambiguity.
-**
-** ^If the filename is an empty string, then a private, temporary
-** on-disk database will be created. ^This private database will be
-** automatically deleted as soon as the database connection is closed.
-**
-** [[URI filenames in sqlite3_open()]] URI Filenames
-**
-** ^If [URI filename] interpretation is enabled, and the filename argument
-** begins with "file:", then the filename is interpreted as a URI. ^URI
-** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is
-** set in the fourth argument to sqlite3_open_v2(), or if it has
-** been enabled globally using the [SQLITE_CONFIG_URI] option with the
-** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option.
-** As of SQLite version 3.7.7, URI filename interpretation is turned off
-** by default, but future releases of SQLite might enable URI filename
-** interpretation by default. See "[URI filenames]" for additional
-** information.
-**
-** URI filenames are parsed according to RFC 3986. ^If the URI contains an
-** authority, then it must be either an empty string or the string
-** "localhost". ^If the authority is not an empty string or "localhost", an
-** error is returned to the caller. ^The fragment component of a URI, if
-** present, is ignored.
-**
-** ^SQLite uses the path component of the URI as the name of the disk file
-** which contains the database. ^If the path begins with a '/' character,
-** then it is interpreted as an absolute path. ^If the path does not begin
-** with a '/' (meaning that the authority section is omitted from the URI)
-** then the path is interpreted as a relative path.
-** ^(On windows, the first component of an absolute path
-** is a drive specification (e.g. "C:").)^
-**
-** [[core URI query parameters]]
-** The query component of a URI may contain parameters that are interpreted
-** either by SQLite itself, or by a [VFS | custom VFS implementation].
-** SQLite and its built-in [VFSes] interpret the
-** following query parameters:
-**
-**
-** - vfs: ^The "vfs" parameter may be used to specify the name of
-** a VFS object that provides the operating system interface that should
-** be used to access the database file on disk. ^If this option is set to
-** an empty string the default VFS object is used. ^Specifying an unknown
-** VFS is an error. ^If sqlite3_open_v2() is used and the vfs option is
-** present, then the VFS specified by the option takes precedence over
-** the value passed as the fourth parameter to sqlite3_open_v2().
-**
-**
- mode: ^(The mode parameter may be set to either "ro", "rw",
-** "rwc", or "memory". Attempting to set it to any other value is
-** an error)^.
-** ^If "ro" is specified, then the database is opened for read-only
-** access, just as if the [SQLITE_OPEN_READONLY] flag had been set in the
-** third argument to sqlite3_open_v2(). ^If the mode option is set to
-** "rw", then the database is opened for read-write (but not create)
-** access, as if SQLITE_OPEN_READWRITE (but not SQLITE_OPEN_CREATE) had
-** been set. ^Value "rwc" is equivalent to setting both
-** SQLITE_OPEN_READWRITE and SQLITE_OPEN_CREATE. ^If the mode option is
-** set to "memory" then a pure [in-memory database] that never reads
-** or writes from disk is used. ^It is an error to specify a value for
-** the mode parameter that is less restrictive than that specified by
-** the flags passed in the third parameter to sqlite3_open_v2().
-**
-**
- cache: ^The cache parameter may be set to either "shared" or
-** "private". ^Setting it to "shared" is equivalent to setting the
-** SQLITE_OPEN_SHAREDCACHE bit in the flags argument passed to
-** sqlite3_open_v2(). ^Setting the cache parameter to "private" is
-** equivalent to setting the SQLITE_OPEN_PRIVATECACHE bit.
-** ^If sqlite3_open_v2() is used and the "cache" parameter is present in
-** a URI filename, its value overrides any behavior requested by setting
-** SQLITE_OPEN_PRIVATECACHE or SQLITE_OPEN_SHAREDCACHE flag.
-**
-**
- psow: ^The psow parameter indicates whether or not the
-** [powersafe overwrite] property does or does not apply to the
-** storage media on which the database file resides.
-**
-**
- nolock: ^The nolock parameter is a boolean query parameter
-** which if set disables file locking in rollback journal modes. This
-** is useful for accessing a database on a filesystem that does not
-** support locking. Caution: Database corruption might result if two
-** or more processes write to the same database and any one of those
-** processes uses nolock=1.
-**
-**
- immutable: ^The immutable parameter is a boolean query
-** parameter that indicates that the database file is stored on
-** read-only media. ^When immutable is set, SQLite assumes that the
-** database file cannot be changed, even by a process with higher
-** privilege, and so the database is opened read-only and all locking
-** and change detection is disabled. Caution: Setting the immutable
-** property on a database file that does in fact change can result
-** in incorrect query results and/or [SQLITE_CORRUPT] errors.
-** See also: [SQLITE_IOCAP_IMMUTABLE].
-**
-**
-**
-** ^Specifying an unknown parameter in the query component of a URI is not an
-** error. Future versions of SQLite might understand additional query
-** parameters. See "[query parameters with special meaning to SQLite]" for
-** additional information.
-**
-** [[URI filename examples]] URI filename examples
-**
-**
-** | URI filenames | Results
-** |
|---|
| file:data.db |
-** Open the file "data.db" in the current directory.
-** |
file:/home/fred/data.db
-** file:///home/fred/data.db
-** file://localhost/home/fred/data.db
|
-** Open the database file "/home/fred/data.db".
-** |
| file://darkstar/home/fred/data.db |
-** An error. "darkstar" is not a recognized authority.
-** |
|
-** file:///C:/Documents%20and%20Settings/fred/Desktop/data.db
-** | Windows only: Open the file "data.db" on fred's desktop on drive
-** C:. Note that the %20 escaping in this example is not strictly
-** necessary - space characters can be used literally
-** in URI filenames.
-** |
| file:data.db?mode=ro&cache=private |
-** Open file "data.db" in the current directory for read-only access.
-** Regardless of whether or not shared-cache mode is enabled by
-** default, use a private cache.
-** |
| file:/home/fred/data.db?vfs=unix-dotfile |
-** Open file "/home/fred/data.db". Use the special VFS "unix-dotfile"
-** that uses dot-files in place of posix advisory locking.
-** |
| file:data.db?mode=readonly |
-** An error. "readonly" is not a valid option for the "mode" parameter.
-** |
-**
-** ^URI hexadecimal escape sequences (%HH) are supported within the path and
-** query components of a URI. A hexadecimal escape sequence consists of a
-** percent sign - "%" - followed by exactly two hexadecimal digits
-** specifying an octet value. ^Before the path or query components of a
-** URI filename are interpreted, they are encoded using UTF-8 and all
-** hexadecimal escape sequences replaced by a single byte containing the
-** corresponding octet. If this process generates an invalid UTF-8 encoding,
-** the results are undefined.
-**
-** Note to Windows users: The encoding used for the filename argument
-** of sqlite3_open() and sqlite3_open_v2() must be UTF-8, not whatever
-** codepage is currently defined. Filenames containing international
-** characters must be converted to UTF-8 prior to passing them into
-** sqlite3_open() or sqlite3_open_v2().
-**
-** Note to Windows Runtime users: The temporary directory must be set
-** prior to calling sqlite3_open() or sqlite3_open_v2(). Otherwise, various
-** features that require the use of temporary files may fail.
-**
-** See also: [sqlite3_temp_directory]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_open(
- const char *filename, /* Database filename (UTF-8) */
- sqlite3 **ppDb /* OUT: SQLite db handle */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_open16(
- const void *filename, /* Database filename (UTF-16) */
- sqlite3 **ppDb /* OUT: SQLite db handle */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_open_v2(
- const char *filename, /* Database filename (UTF-8) */
- sqlite3 **ppDb, /* OUT: SQLite db handle */
- int flags, /* Flags */
- const char *zVfs /* Name of VFS module to use */
-);
-
-/*
-** CAPI3REF: Obtain Values For URI Parameters
-**
-** These are utility routines, useful to VFS implementations, that check
-** to see if a database file was a URI that contained a specific query
-** parameter, and if so obtains the value of that query parameter.
-**
-** If F is the database filename pointer passed into the xOpen() method of
-** a VFS implementation when the flags parameter to xOpen() has one or
-** more of the [SQLITE_OPEN_URI] or [SQLITE_OPEN_MAIN_DB] bits set and
-** P is the name of the query parameter, then
-** sqlite3_uri_parameter(F,P) returns the value of the P
-** parameter if it exists or a NULL pointer if P does not appear as a
-** query parameter on F. If P is a query parameter of F
-** has no explicit value, then sqlite3_uri_parameter(F,P) returns
-** a pointer to an empty string.
-**
-** The sqlite3_uri_boolean(F,P,B) routine assumes that P is a boolean
-** parameter and returns true (1) or false (0) according to the value
-** of P. The sqlite3_uri_boolean(F,P,B) routine returns true (1) if the
-** value of query parameter P is one of "yes", "true", or "on" in any
-** case or if the value begins with a non-zero number. The
-** sqlite3_uri_boolean(F,P,B) routines returns false (0) if the value of
-** query parameter P is one of "no", "false", or "off" in any case or
-** if the value begins with a numeric zero. If P is not a query
-** parameter on F or if the value of P is does not match any of the
-** above, then sqlite3_uri_boolean(F,P,B) returns (B!=0).
-**
-** The sqlite3_uri_int64(F,P,D) routine converts the value of P into a
-** 64-bit signed integer and returns that integer, or D if P does not
-** exist. If the value of P is something other than an integer, then
-** zero is returned.
-**
-** If F is a NULL pointer, then sqlite3_uri_parameter(F,P) returns NULL and
-** sqlite3_uri_boolean(F,P,B) returns B. If F is not a NULL pointer and
-** is not a database file pathname pointer that SQLite passed into the xOpen
-** VFS method, then the behavior of this routine is undefined and probably
-** undesirable.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_uri_parameter(const char *zFilename, const char *zParam);
-SQLITE_API int SQLITE_STDCALL sqlite3_uri_boolean(const char *zFile, const char *zParam, int bDefault);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_uri_int64(const char*, const char*, sqlite3_int64);
-
-
-/*
-** CAPI3REF: Error Codes And Messages
-** METHOD: sqlite3
-**
-** ^If the most recent sqlite3_* API call associated with
-** [database connection] D failed, then the sqlite3_errcode(D) interface
-** returns the numeric [result code] or [extended result code] for that
-** API call.
-** If the most recent API call was successful,
-** then the return value from sqlite3_errcode() is undefined.
-** ^The sqlite3_extended_errcode()
-** interface is the same except that it always returns the
-** [extended result code] even when extended result codes are
-** disabled.
-**
-** ^The sqlite3_errmsg() and sqlite3_errmsg16() return English-language
-** text that describes the error, as either UTF-8 or UTF-16 respectively.
-** ^(Memory to hold the error message string is managed internally.
-** The application does not need to worry about freeing the result.
-** However, the error string might be overwritten or deallocated by
-** subsequent calls to other SQLite interface functions.)^
-**
-** ^The sqlite3_errstr() interface returns the English-language text
-** that describes the [result code], as UTF-8.
-** ^(Memory to hold the error message string is managed internally
-** and must not be freed by the application)^.
-**
-** When the serialized [threading mode] is in use, it might be the
-** case that a second error occurs on a separate thread in between
-** the time of the first error and the call to these interfaces.
-** When that happens, the second error will be reported since these
-** interfaces always report the most recent result. To avoid
-** this, each thread can obtain exclusive use of the [database connection] D
-** by invoking [sqlite3_mutex_enter]([sqlite3_db_mutex](D)) before beginning
-** to use D and invoking [sqlite3_mutex_leave]([sqlite3_db_mutex](D)) after
-** all calls to the interfaces listed here are completed.
-**
-** If an interface fails with SQLITE_MISUSE, that means the interface
-** was invoked incorrectly by the application. In that case, the
-** error code and message may or may not be set.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_errcode(sqlite3 *db);
-SQLITE_API int SQLITE_STDCALL sqlite3_extended_errcode(sqlite3 *db);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errmsg(sqlite3*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_errmsg16(sqlite3*);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_errstr(int);
-
-/*
-** CAPI3REF: Prepared Statement Object
-** KEYWORDS: {prepared statement} {prepared statements}
-**
-** An instance of this object represents a single SQL statement that
-** has been compiled into binary form and is ready to be evaluated.
-**
-** Think of each SQL statement as a separate computer program. The
-** original SQL text is source code. A prepared statement object
-** is the compiled object code. All SQL must be converted into a
-** prepared statement before it can be run.
-**
-** The life-cycle of a prepared statement object usually goes like this:
-**
-**
-** - Create the prepared statement object using [sqlite3_prepare_v2()].
-**
- Bind values to [parameters] using the sqlite3_bind_*()
-** interfaces.
-**
- Run the SQL by calling [sqlite3_step()] one or more times.
-**
- Reset the prepared statement using [sqlite3_reset()] then go back
-** to step 2. Do this zero or more times.
-**
- Destroy the object using [sqlite3_finalize()].
-**
-*/
-typedef struct sqlite3_stmt sqlite3_stmt;
-
-/*
-** CAPI3REF: Run-time Limits
-** METHOD: sqlite3
-**
-** ^(This interface allows the size of various constructs to be limited
-** on a connection by connection basis. The first parameter is the
-** [database connection] whose limit is to be set or queried. The
-** second parameter is one of the [limit categories] that define a
-** class of constructs to be size limited. The third parameter is the
-** new limit for that construct.)^
-**
-** ^If the new limit is a negative number, the limit is unchanged.
-** ^(For each limit category SQLITE_LIMIT_NAME there is a
-** [limits | hard upper bound]
-** set at compile-time by a C preprocessor macro called
-** [limits | SQLITE_MAX_NAME].
-** (The "_LIMIT_" in the name is changed to "_MAX_".))^
-** ^Attempts to increase a limit above its hard upper bound are
-** silently truncated to the hard upper bound.
-**
-** ^Regardless of whether or not the limit was changed, the
-** [sqlite3_limit()] interface returns the prior value of the limit.
-** ^Hence, to find the current value of a limit without changing it,
-** simply invoke this interface with the third parameter set to -1.
-**
-** Run-time limits are intended for use in applications that manage
-** both their own internal database and also databases that are controlled
-** by untrusted external sources. An example application might be a
-** web browser that has its own databases for storing history and
-** separate databases controlled by JavaScript applications downloaded
-** off the Internet. The internal databases can be given the
-** large, default limits. Databases managed by external sources can
-** be given much smaller limits designed to prevent a denial of service
-** attack. Developers might also want to use the [sqlite3_set_authorizer()]
-** interface to further control untrusted SQL. The size of the database
-** created by an untrusted script can be contained using the
-** [max_page_count] [PRAGMA].
-**
-** New run-time limit categories may be added in future releases.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_limit(sqlite3*, int id, int newVal);
-
-/*
-** CAPI3REF: Run-Time Limit Categories
-** KEYWORDS: {limit category} {*limit categories}
-**
-** These constants define various performance limits
-** that can be lowered at run-time using [sqlite3_limit()].
-** The synopsis of the meanings of the various limits is shown below.
-** Additional information is available at [limits | Limits in SQLite].
-**
-**
-** [[SQLITE_LIMIT_LENGTH]] ^(- SQLITE_LIMIT_LENGTH
-** - The maximum size of any string or BLOB or table row, in bytes.
- )^
-**
-** [[SQLITE_LIMIT_SQL_LENGTH]] ^(
- SQLITE_LIMIT_SQL_LENGTH
-** - The maximum length of an SQL statement, in bytes.
)^
-**
-** [[SQLITE_LIMIT_COLUMN]] ^(- SQLITE_LIMIT_COLUMN
-** - The maximum number of columns in a table definition or in the
-** result set of a [SELECT] or the maximum number of columns in an index
-** or in an ORDER BY or GROUP BY clause.
)^
-**
-** [[SQLITE_LIMIT_EXPR_DEPTH]] ^(- SQLITE_LIMIT_EXPR_DEPTH
-** - The maximum depth of the parse tree on any expression.
)^
-**
-** [[SQLITE_LIMIT_COMPOUND_SELECT]] ^(- SQLITE_LIMIT_COMPOUND_SELECT
-** - The maximum number of terms in a compound SELECT statement.
)^
-**
-** [[SQLITE_LIMIT_VDBE_OP]] ^(- SQLITE_LIMIT_VDBE_OP
-** - The maximum number of instructions in a virtual machine program
-** used to implement an SQL statement. This limit is not currently
-** enforced, though that might be added in some future release of
-** SQLite.
)^
-**
-** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(- SQLITE_LIMIT_FUNCTION_ARG
-** - The maximum number of arguments on a function.
)^
-**
-** [[SQLITE_LIMIT_ATTACHED]] ^(- SQLITE_LIMIT_ATTACHED
-** - The maximum number of [ATTACH | attached databases].)^
-**
-** [[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]]
-** ^(- SQLITE_LIMIT_LIKE_PATTERN_LENGTH
-** - The maximum length of the pattern argument to the [LIKE] or
-** [GLOB] operators.
)^
-**
-** [[SQLITE_LIMIT_VARIABLE_NUMBER]]
-** ^(- SQLITE_LIMIT_VARIABLE_NUMBER
-** - The maximum index number of any [parameter] in an SQL statement.)^
-**
-** [[SQLITE_LIMIT_TRIGGER_DEPTH]] ^(
- SQLITE_LIMIT_TRIGGER_DEPTH
-** - The maximum depth of recursion for triggers.
)^
-**
-** [[SQLITE_LIMIT_WORKER_THREADS]] ^(- SQLITE_LIMIT_WORKER_THREADS
-** - The maximum number of auxiliary worker threads that a single
-** [prepared statement] may start.
)^
-**
-*/
-#define SQLITE_LIMIT_LENGTH 0
-#define SQLITE_LIMIT_SQL_LENGTH 1
-#define SQLITE_LIMIT_COLUMN 2
-#define SQLITE_LIMIT_EXPR_DEPTH 3
-#define SQLITE_LIMIT_COMPOUND_SELECT 4
-#define SQLITE_LIMIT_VDBE_OP 5
-#define SQLITE_LIMIT_FUNCTION_ARG 6
-#define SQLITE_LIMIT_ATTACHED 7
-#define SQLITE_LIMIT_LIKE_PATTERN_LENGTH 8
-#define SQLITE_LIMIT_VARIABLE_NUMBER 9
-#define SQLITE_LIMIT_TRIGGER_DEPTH 10
-#define SQLITE_LIMIT_WORKER_THREADS 11
-
-/*
-** CAPI3REF: Compiling An SQL Statement
-** KEYWORDS: {SQL statement compiler}
-** METHOD: sqlite3
-** CONSTRUCTOR: sqlite3_stmt
-**
-** To execute an SQL query, it must first be compiled into a byte-code
-** program using one of these routines.
-**
-** The first argument, "db", is a [database connection] obtained from a
-** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or
-** [sqlite3_open16()]. The database connection must not have been closed.
-**
-** The second argument, "zSql", is the statement to be compiled, encoded
-** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2()
-** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2()
-** use UTF-16.
-**
-** ^If the nByte argument is negative, then zSql is read up to the
-** first zero terminator. ^If nByte is positive, then it is the
-** number of bytes read from zSql. ^If nByte is zero, then no prepared
-** statement is generated.
-** If the caller knows that the supplied string is nul-terminated, then
-** there is a small performance advantage to passing an nByte parameter that
-** is the number of bytes in the input string including
-** the nul-terminator.
-**
-** ^If pzTail is not NULL then *pzTail is made to point to the first byte
-** past the end of the first SQL statement in zSql. These routines only
-** compile the first statement in zSql, so *pzTail is left pointing to
-** what remains uncompiled.
-**
-** ^*ppStmt is left pointing to a compiled [prepared statement] that can be
-** executed using [sqlite3_step()]. ^If there is an error, *ppStmt is set
-** to NULL. ^If the input text contains no SQL (if the input is an empty
-** string or a comment) then *ppStmt is set to NULL.
-** The calling procedure is responsible for deleting the compiled
-** SQL statement using [sqlite3_finalize()] after it has finished with it.
-** ppStmt may not be NULL.
-**
-** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK];
-** otherwise an [error code] is returned.
-**
-** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are
-** recommended for all new programs. The two older interfaces are retained
-** for backwards compatibility, but their use is discouraged.
-** ^In the "v2" interfaces, the prepared statement
-** that is returned (the [sqlite3_stmt] object) contains a copy of the
-** original SQL text. This causes the [sqlite3_step()] interface to
-** behave differently in three ways:
-**
-**
-** -
-** ^If the database schema changes, instead of returning [SQLITE_SCHEMA] as it
-** always used to do, [sqlite3_step()] will automatically recompile the SQL
-** statement and try to run it again. As many as [SQLITE_MAX_SCHEMA_RETRY]
-** retries will occur before sqlite3_step() gives up and returns an error.
-**
-**
-** -
-** ^When an error occurs, [sqlite3_step()] will return one of the detailed
-** [error codes] or [extended error codes]. ^The legacy behavior was that
-** [sqlite3_step()] would only return a generic [SQLITE_ERROR] result code
-** and the application would have to make a second call to [sqlite3_reset()]
-** in order to find the underlying cause of the problem. With the "v2" prepare
-** interfaces, the underlying reason for the error is returned immediately.
-**
-**
-** -
-** ^If the specific value bound to [parameter | host parameter] in the
-** WHERE clause might influence the choice of query plan for a statement,
-** then the statement will be automatically recompiled, as if there had been
-** a schema change, on the first [sqlite3_step()] call following any change
-** to the [sqlite3_bind_text | bindings] of that [parameter].
-** ^The specific value of WHERE-clause [parameter] might influence the
-** choice of query plan if the parameter is the left-hand side of a [LIKE]
-** or [GLOB] operator or if the parameter is compared to an indexed column
-** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled.
-**
-**
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare(
- sqlite3 *db, /* Database handle */
- const char *zSql, /* SQL statement, UTF-8 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const char **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare_v2(
- sqlite3 *db, /* Database handle */
- const char *zSql, /* SQL statement, UTF-8 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const char **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16(
- sqlite3 *db, /* Database handle */
- const void *zSql, /* SQL statement, UTF-16 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const void **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_prepare16_v2(
- sqlite3 *db, /* Database handle */
- const void *zSql, /* SQL statement, UTF-16 encoded */
- int nByte, /* Maximum length of zSql in bytes. */
- sqlite3_stmt **ppStmt, /* OUT: Statement handle */
- const void **pzTail /* OUT: Pointer to unused portion of zSql */
-);
-
-/*
-** CAPI3REF: Retrieving Statement SQL
-** METHOD: sqlite3_stmt
-**
-** ^This interface can be used to retrieve a saved copy of the original
-** SQL text used to create a [prepared statement] if that statement was
-** compiled using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()].
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_sql(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Determine If An SQL Statement Writes The Database
-** METHOD: sqlite3_stmt
-**
-** ^The sqlite3_stmt_readonly(X) interface returns true (non-zero) if
-** and only if the [prepared statement] X makes no direct changes to
-** the content of the database file.
-**
-** Note that [application-defined SQL functions] or
-** [virtual tables] might change the database indirectly as a side effect.
-** ^(For example, if an application defines a function "eval()" that
-** calls [sqlite3_exec()], then the following SQL statement would
-** change the database file through side-effects:
-**
-**
-** SELECT eval('DELETE FROM t1') FROM t2;
-**
-**
-** But because the [SELECT] statement does not change the database file
-** directly, sqlite3_stmt_readonly() would still return true.)^
-**
-** ^Transaction control statements such as [BEGIN], [COMMIT], [ROLLBACK],
-** [SAVEPOINT], and [RELEASE] cause sqlite3_stmt_readonly() to return true,
-** since the statements themselves do not actually modify the database but
-** rather they control the timing of when other statements modify the
-** database. ^The [ATTACH] and [DETACH] statements also cause
-** sqlite3_stmt_readonly() to return true since, while those statements
-** change the configuration of a database connection, they do not make
-** changes to the content of the database files on disk.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_readonly(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Determine If A Prepared Statement Has Been Reset
-** METHOD: sqlite3_stmt
-**
-** ^The sqlite3_stmt_busy(S) interface returns true (non-zero) if the
-** [prepared statement] S has been stepped at least once using
-** [sqlite3_step(S)] but has neither run to completion (returned
-** [SQLITE_DONE] from [sqlite3_step(S)]) nor
-** been reset using [sqlite3_reset(S)]. ^The sqlite3_stmt_busy(S)
-** interface returns false if S is a NULL pointer. If S is not a
-** NULL pointer and is not a pointer to a valid [prepared statement]
-** object, then the behavior is undefined and probably undesirable.
-**
-** This interface can be used in combination [sqlite3_next_stmt()]
-** to locate all prepared statements associated with a database
-** connection that are in need of being reset. This can be used,
-** for example, in diagnostic routines to search for prepared
-** statements that are holding a transaction open.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_busy(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Dynamically Typed Value Object
-** KEYWORDS: {protected sqlite3_value} {unprotected sqlite3_value}
-**
-** SQLite uses the sqlite3_value object to represent all values
-** that can be stored in a database table. SQLite uses dynamic typing
-** for the values it stores. ^Values stored in sqlite3_value objects
-** can be integers, floating point values, strings, BLOBs, or NULL.
-**
-** An sqlite3_value object may be either "protected" or "unprotected".
-** Some interfaces require a protected sqlite3_value. Other interfaces
-** will accept either a protected or an unprotected sqlite3_value.
-** Every interface that accepts sqlite3_value arguments specifies
-** whether or not it requires a protected sqlite3_value. The
-** [sqlite3_value_dup()] interface can be used to construct a new
-** protected sqlite3_value from an unprotected sqlite3_value.
-**
-** The terms "protected" and "unprotected" refer to whether or not
-** a mutex is held. An internal mutex is held for a protected
-** sqlite3_value object but no mutex is held for an unprotected
-** sqlite3_value object. If SQLite is compiled to be single-threaded
-** (with [SQLITE_THREADSAFE=0] and with [sqlite3_threadsafe()] returning 0)
-** or if SQLite is run in one of reduced mutex modes
-** [SQLITE_CONFIG_SINGLETHREAD] or [SQLITE_CONFIG_MULTITHREAD]
-** then there is no distinction between protected and unprotected
-** sqlite3_value objects and they can be used interchangeably. However,
-** for maximum code portability it is recommended that applications
-** still make the distinction between protected and unprotected
-** sqlite3_value objects even when not strictly required.
-**
-** ^The sqlite3_value objects that are passed as parameters into the
-** implementation of [application-defined SQL functions] are protected.
-** ^The sqlite3_value object returned by
-** [sqlite3_column_value()] is unprotected.
-** Unprotected sqlite3_value objects may only be used with
-** [sqlite3_result_value()] and [sqlite3_bind_value()].
-** The [sqlite3_value_blob | sqlite3_value_type()] family of
-** interfaces require protected sqlite3_value objects.
-*/
-typedef struct Mem sqlite3_value;
-
-/*
-** CAPI3REF: SQL Function Context Object
-**
-** The context in which an SQL function executes is stored in an
-** sqlite3_context object. ^A pointer to an sqlite3_context object
-** is always first parameter to [application-defined SQL functions].
-** The application-defined SQL function implementation will pass this
-** pointer through into calls to [sqlite3_result_int | sqlite3_result()],
-** [sqlite3_aggregate_context()], [sqlite3_user_data()],
-** [sqlite3_context_db_handle()], [sqlite3_get_auxdata()],
-** and/or [sqlite3_set_auxdata()].
-*/
-typedef struct sqlite3_context sqlite3_context;
-
-/*
-** CAPI3REF: Binding Values To Prepared Statements
-** KEYWORDS: {host parameter} {host parameters} {host parameter name}
-** KEYWORDS: {SQL parameter} {SQL parameters} {parameter binding}
-** METHOD: sqlite3_stmt
-**
-** ^(In the SQL statement text input to [sqlite3_prepare_v2()] and its variants,
-** literals may be replaced by a [parameter] that matches one of following
-** templates:
-**
-**
-** - ?
-**
- ?NNN
-**
- :VVV
-**
- @VVV
-**
- $VVV
-**
-**
-** In the templates above, NNN represents an integer literal,
-** and VVV represents an alphanumeric identifier.)^ ^The values of these
-** parameters (also called "host parameter names" or "SQL parameters")
-** can be set using the sqlite3_bind_*() routines defined here.
-**
-** ^The first argument to the sqlite3_bind_*() routines is always
-** a pointer to the [sqlite3_stmt] object returned from
-** [sqlite3_prepare_v2()] or its variants.
-**
-** ^The second argument is the index of the SQL parameter to be set.
-** ^The leftmost SQL parameter has an index of 1. ^When the same named
-** SQL parameter is used more than once, second and subsequent
-** occurrences have the same index as the first occurrence.
-** ^The index for named parameters can be looked up using the
-** [sqlite3_bind_parameter_index()] API if desired. ^The index
-** for "?NNN" parameters is the value of NNN.
-** ^The NNN value must be between 1 and the [sqlite3_limit()]
-** parameter [SQLITE_LIMIT_VARIABLE_NUMBER] (default value: 999).
-**
-** ^The third argument is the value to bind to the parameter.
-** ^If the third parameter to sqlite3_bind_text() or sqlite3_bind_text16()
-** or sqlite3_bind_blob() is a NULL pointer then the fourth parameter
-** is ignored and the end result is the same as sqlite3_bind_null().
-**
-** ^(In those routines that have a fourth argument, its value is the
-** number of bytes in the parameter. To be clear: the value is the
-** number of bytes in the value, not the number of characters.)^
-** ^If the fourth parameter to sqlite3_bind_text() or sqlite3_bind_text16()
-** is negative, then the length of the string is
-** the number of bytes up to the first zero terminator.
-** If the fourth parameter to sqlite3_bind_blob() is negative, then
-** the behavior is undefined.
-** If a non-negative fourth parameter is provided to sqlite3_bind_text()
-** or sqlite3_bind_text16() or sqlite3_bind_text64() then
-** that parameter must be the byte offset
-** where the NUL terminator would occur assuming the string were NUL
-** terminated. If any NUL characters occur at byte offsets less than
-** the value of the fourth parameter then the resulting string value will
-** contain embedded NULs. The result of expressions involving strings
-** with embedded NULs is undefined.
-**
-** ^The fifth argument to the BLOB and string binding interfaces
-** is a destructor used to dispose of the BLOB or
-** string after SQLite has finished with it. ^The destructor is called
-** to dispose of the BLOB or string even if the call to bind API fails.
-** ^If the fifth argument is
-** the special value [SQLITE_STATIC], then SQLite assumes that the
-** information is in static, unmanaged space and does not need to be freed.
-** ^If the fifth argument has the value [SQLITE_TRANSIENT], then
-** SQLite makes its own private copy of the data immediately, before
-** the sqlite3_bind_*() routine returns.
-**
-** ^The sixth argument to sqlite3_bind_text64() must be one of
-** [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE]
-** to specify the encoding of the text in the third parameter. If
-** the sixth argument to sqlite3_bind_text64() is not one of the
-** allowed values shown above, or if the text encoding is different
-** from the encoding specified by the sixth parameter, then the behavior
-** is undefined.
-**
-** ^The sqlite3_bind_zeroblob() routine binds a BLOB of length N that
-** is filled with zeroes. ^A zeroblob uses a fixed amount of memory
-** (just an integer to hold its size) while it is being processed.
-** Zeroblobs are intended to serve as placeholders for BLOBs whose
-** content is later written using
-** [sqlite3_blob_open | incremental BLOB I/O] routines.
-** ^A negative value for the zeroblob results in a zero-length BLOB.
-**
-** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer
-** for the [prepared statement] or with a prepared statement for which
-** [sqlite3_step()] has been called more recently than [sqlite3_reset()],
-** then the call will return [SQLITE_MISUSE]. If any sqlite3_bind_()
-** routine is passed a [prepared statement] that has been finalized, the
-** result is undefined and probably harmful.
-**
-** ^Bindings are not cleared by the [sqlite3_reset()] routine.
-** ^Unbound parameters are interpreted as NULL.
-**
-** ^The sqlite3_bind_* routines return [SQLITE_OK] on success or an
-** [error code] if anything goes wrong.
-** ^[SQLITE_TOOBIG] might be returned if the size of a string or BLOB
-** exceeds limits imposed by [sqlite3_limit]([SQLITE_LIMIT_LENGTH]) or
-** [SQLITE_MAX_LENGTH].
-** ^[SQLITE_RANGE] is returned if the parameter
-** index is out of range. ^[SQLITE_NOMEM] is returned if malloc() fails.
-**
-** See also: [sqlite3_bind_parameter_count()],
-** [sqlite3_bind_parameter_name()], and [sqlite3_bind_parameter_index()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob(sqlite3_stmt*, int, const void*, int n, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_blob64(sqlite3_stmt*, int, const void*, sqlite3_uint64,
- void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_double(sqlite3_stmt*, int, double);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int(sqlite3_stmt*, int, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_int64(sqlite3_stmt*, int, sqlite3_int64);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_null(sqlite3_stmt*, int);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text(sqlite3_stmt*,int,const char*,int,void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*)(void*));
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64,
- void(*)(void*), unsigned char encoding);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64);
-
-/*
-** CAPI3REF: Number Of SQL Parameters
-** METHOD: sqlite3_stmt
-**
-** ^This routine can be used to find the number of [SQL parameters]
-** in a [prepared statement]. SQL parameters are tokens of the
-** form "?", "?NNN", ":AAA", "$AAA", or "@AAA" that serve as
-** placeholders for values that are [sqlite3_bind_blob | bound]
-** to the parameters at a later time.
-**
-** ^(This routine actually returns the index of the largest (rightmost)
-** parameter. For all forms except ?NNN, this will correspond to the
-** number of unique parameters. If parameters of the ?NNN form are used,
-** there may be gaps in the list.)^
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_name()], and
-** [sqlite3_bind_parameter_index()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_count(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Name Of A Host Parameter
-** METHOD: sqlite3_stmt
-**
-** ^The sqlite3_bind_parameter_name(P,N) interface returns
-** the name of the N-th [SQL parameter] in the [prepared statement] P.
-** ^(SQL parameters of the form "?NNN" or ":AAA" or "@AAA" or "$AAA"
-** have a name which is the string "?NNN" or ":AAA" or "@AAA" or "$AAA"
-** respectively.
-** In other words, the initial ":" or "$" or "@" or "?"
-** is included as part of the name.)^
-** ^Parameters of the form "?" without a following integer have no name
-** and are referred to as "nameless" or "anonymous parameters".
-**
-** ^The first host parameter has an index of 1, not 0.
-**
-** ^If the value N is out of range or if the N-th parameter is
-** nameless, then NULL is returned. ^The returned string is
-** always in UTF-8 encoding even if the named parameter was
-** originally specified as UTF-16 in [sqlite3_prepare16()] or
-** [sqlite3_prepare16_v2()].
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_index()].
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_bind_parameter_name(sqlite3_stmt*, int);
-
-/*
-** CAPI3REF: Index Of A Parameter With A Given Name
-** METHOD: sqlite3_stmt
-**
-** ^Return the index of an SQL parameter given its name. ^The
-** index value returned is suitable for use as the second
-** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero
-** is returned if no matching parameter is found. ^The parameter
-** name must be given in UTF-8 even if the original statement
-** was prepared from UTF-16 text using [sqlite3_prepare16_v2()].
-**
-** See also: [sqlite3_bind_blob|sqlite3_bind()],
-** [sqlite3_bind_parameter_count()], and
-** [sqlite3_bind_parameter_name()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_bind_parameter_index(sqlite3_stmt*, const char *zName);
-
-/*
-** CAPI3REF: Reset All Bindings On A Prepared Statement
-** METHOD: sqlite3_stmt
-**
-** ^Contrary to the intuition of many, [sqlite3_reset()] does not reset
-** the [sqlite3_bind_blob | bindings] on a [prepared statement].
-** ^Use this routine to reset all host parameters to NULL.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_clear_bindings(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Number Of Columns In A Result Set
-** METHOD: sqlite3_stmt
-**
-** ^Return the number of columns in the result set returned by the
-** [prepared statement]. ^This routine returns 0 if pStmt is an SQL
-** statement that does not return data (for example an [UPDATE]).
-**
-** See also: [sqlite3_data_count()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_column_count(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Column Names In A Result Set
-** METHOD: sqlite3_stmt
-**
-** ^These routines return the name assigned to a particular column
-** in the result set of a [SELECT] statement. ^The sqlite3_column_name()
-** interface returns a pointer to a zero-terminated UTF-8 string
-** and sqlite3_column_name16() returns a pointer to a zero-terminated
-** UTF-16 string. ^The first parameter is the [prepared statement]
-** that implements the [SELECT] statement. ^The second parameter is the
-** column number. ^The leftmost column is number 0.
-**
-** ^The returned string pointer is valid until either the [prepared statement]
-** is destroyed by [sqlite3_finalize()] or until the statement is automatically
-** reprepared by the first call to [sqlite3_step()] for a particular run
-** or until the next call to
-** sqlite3_column_name() or sqlite3_column_name16() on the same column.
-**
-** ^If sqlite3_malloc() fails during the processing of either routine
-** (for example during a conversion from UTF-8 to UTF-16) then a
-** NULL pointer is returned.
-**
-** ^The name of a result column is the value of the "AS" clause for
-** that column, if there is an AS clause. If there is no AS clause
-** then the name of the column is unspecified and may change from
-** one release of SQLite to the next.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_name(sqlite3_stmt*, int N);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_name16(sqlite3_stmt*, int N);
-
-/*
-** CAPI3REF: Source Of Data In A Query Result
-** METHOD: sqlite3_stmt
-**
-** ^These routines provide a means to determine the database, table, and
-** table column that is the origin of a particular result column in
-** [SELECT] statement.
-** ^The name of the database or table or column can be returned as
-** either a UTF-8 or UTF-16 string. ^The _database_ routines return
-** the database name, the _table_ routines return the table name, and
-** the origin_ routines return the column name.
-** ^The returned string is valid until the [prepared statement] is destroyed
-** using [sqlite3_finalize()] or until the statement is automatically
-** reprepared by the first call to [sqlite3_step()] for a particular run
-** or until the same information is requested
-** again in a different encoding.
-**
-** ^The names returned are the original un-aliased names of the
-** database, table, and column.
-**
-** ^The first argument to these interfaces is a [prepared statement].
-** ^These functions return information about the Nth result column returned by
-** the statement, where N is the second function argument.
-** ^The left-most column is column 0 for these routines.
-**
-** ^If the Nth column returned by the statement is an expression or
-** subquery and is not a column value, then all of these functions return
-** NULL. ^These routine might also return NULL if a memory allocation error
-** occurs. ^Otherwise, they return the name of the attached database, table,
-** or column that query result column was extracted from.
-**
-** ^As with all other SQLite APIs, those whose names end with "16" return
-** UTF-16 encoded strings and the other functions return UTF-8.
-**
-** ^These APIs are only available if the library was compiled with the
-** [SQLITE_ENABLE_COLUMN_METADATA] C-preprocessor symbol.
-**
-** If two or more threads call one or more of these routines against the same
-** prepared statement and column at the same time then the results are
-** undefined.
-**
-** If two or more threads call one or more
-** [sqlite3_column_database_name | column metadata interfaces]
-** for the same [prepared statement] and result column
-** at the same time then the results are undefined.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_database_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_database_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_table_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_table_name16(sqlite3_stmt*,int);
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_origin_name(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_origin_name16(sqlite3_stmt*,int);
-
-/*
-** CAPI3REF: Declared Datatype Of A Query Result
-** METHOD: sqlite3_stmt
-**
-** ^(The first parameter is a [prepared statement].
-** If this statement is a [SELECT] statement and the Nth column of the
-** returned result set of that [SELECT] is a table column (not an
-** expression or subquery) then the declared type of the table
-** column is returned.)^ ^If the Nth column of the result set is an
-** expression or subquery, then a NULL pointer is returned.
-** ^The returned string is always UTF-8 encoded.
-**
-** ^(For example, given the database schema:
-**
-** CREATE TABLE t1(c1 VARIANT);
-**
-** and the following statement to be compiled:
-**
-** SELECT c1 + 1, c1 FROM t1;
-**
-** this routine would return the string "VARIANT" for the second result
-** column (i==1), and a NULL pointer for the first result column (i==0).)^
-**
-** ^SQLite uses dynamic run-time typing. ^So just because a column
-** is declared to contain a particular type does not mean that the
-** data stored in that column is of the declared type. SQLite is
-** strongly typed, but the typing is dynamic not static. ^Type
-** is associated with individual values, not with the containers
-** used to hold those values.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_column_decltype(sqlite3_stmt*,int);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_decltype16(sqlite3_stmt*,int);
-
-/*
-** CAPI3REF: Evaluate An SQL Statement
-** METHOD: sqlite3_stmt
-**
-** After a [prepared statement] has been prepared using either
-** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy
-** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function
-** must be called one or more times to evaluate the statement.
-**
-** The details of the behavior of the sqlite3_step() interface depend
-** on whether the statement was prepared using the newer "v2" interface
-** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy
-** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the
-** new "v2" interface is recommended for new applications but the legacy
-** interface will continue to be supported.
-**
-** ^In the legacy interface, the return value will be either [SQLITE_BUSY],
-** [SQLITE_DONE], [SQLITE_ROW], [SQLITE_ERROR], or [SQLITE_MISUSE].
-** ^With the "v2" interface, any of the other [result codes] or
-** [extended result codes] might be returned as well.
-**
-** ^[SQLITE_BUSY] means that the database engine was unable to acquire the
-** database locks it needs to do its job. ^If the statement is a [COMMIT]
-** or occurs outside of an explicit transaction, then you can retry the
-** statement. If the statement is not a [COMMIT] and occurs within an
-** explicit transaction then you should rollback the transaction before
-** continuing.
-**
-** ^[SQLITE_DONE] means that the statement has finished executing
-** successfully. sqlite3_step() should not be called again on this virtual
-** machine without first calling [sqlite3_reset()] to reset the virtual
-** machine back to its initial state.
-**
-** ^If the SQL statement being executed returns any data, then [SQLITE_ROW]
-** is returned each time a new row of data is ready for processing by the
-** caller. The values may be accessed using the [column access functions].
-** sqlite3_step() is called again to retrieve the next row of data.
-**
-** ^[SQLITE_ERROR] means that a run-time error (such as a constraint
-** violation) has occurred. sqlite3_step() should not be called again on
-** the VM. More information may be found by calling [sqlite3_errmsg()].
-** ^With the legacy interface, a more specific error code (for example,
-** [SQLITE_INTERRUPT], [SQLITE_SCHEMA], [SQLITE_CORRUPT], and so forth)
-** can be obtained by calling [sqlite3_reset()] on the
-** [prepared statement]. ^In the "v2" interface,
-** the more specific error code is returned directly by sqlite3_step().
-**
-** [SQLITE_MISUSE] means that the this routine was called inappropriately.
-** Perhaps it was called on a [prepared statement] that has
-** already been [sqlite3_finalize | finalized] or on one that had
-** previously returned [SQLITE_ERROR] or [SQLITE_DONE]. Or it could
-** be the case that the same database connection is being used by two or
-** more threads at the same moment in time.
-**
-** For all versions of SQLite up to and including 3.6.23.1, a call to
-** [sqlite3_reset()] was required after sqlite3_step() returned anything
-** other than [SQLITE_ROW] before any subsequent invocation of
-** sqlite3_step(). Failure to reset the prepared statement using
-** [sqlite3_reset()] would result in an [SQLITE_MISUSE] return from
-** sqlite3_step(). But after version 3.6.23.1, sqlite3_step() began
-** calling [sqlite3_reset()] automatically in this circumstance rather
-** than returning [SQLITE_MISUSE]. This is not considered a compatibility
-** break because any application that ever receives an SQLITE_MISUSE error
-** is broken by definition. The [SQLITE_OMIT_AUTORESET] compile-time option
-** can be used to restore the legacy behavior.
-**
-** Goofy Interface Alert: In the legacy interface, the sqlite3_step()
-** API always returns a generic error code, [SQLITE_ERROR], following any
-** error other than [SQLITE_BUSY] and [SQLITE_MISUSE]. You must call
-** [sqlite3_reset()] or [sqlite3_finalize()] in order to find one of the
-** specific [error codes] that better describes the error.
-** We admit that this is a goofy design. The problem has been fixed
-** with the "v2" interface. If you prepare all of your SQL statements
-** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead
-** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces,
-** then the more specific [error codes] are returned directly
-** by sqlite3_step(). The use of the "v2" interface is recommended.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_step(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Number of columns in a result set
-** METHOD: sqlite3_stmt
-**
-** ^The sqlite3_data_count(P) interface returns the number of columns in the
-** current row of the result set of [prepared statement] P.
-** ^If prepared statement P does not have results ready to return
-** (via calls to the [sqlite3_column_int | sqlite3_column_*()] of
-** interfaces) then sqlite3_data_count(P) returns 0.
-** ^The sqlite3_data_count(P) routine also returns 0 if P is a NULL pointer.
-** ^The sqlite3_data_count(P) routine returns 0 if the previous call to
-** [sqlite3_step](P) returned [SQLITE_DONE]. ^The sqlite3_data_count(P)
-** will return non-zero if previous call to [sqlite3_step](P) returned
-** [SQLITE_ROW], except in the case of the [PRAGMA incremental_vacuum]
-** where it always returns zero since each step of that multi-step
-** pragma returns 0 columns of data.
-**
-** See also: [sqlite3_column_count()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_data_count(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Fundamental Datatypes
-** KEYWORDS: SQLITE_TEXT
-**
-** ^(Every value in SQLite has one of five fundamental datatypes:
-**
-**
-** - 64-bit signed integer
-**
- 64-bit IEEE floating point number
-**
- string
-**
- BLOB
-**
- NULL
-**
)^
-**
-** These constants are codes for each of those types.
-**
-** Note that the SQLITE_TEXT constant was also used in SQLite version 2
-** for a completely different meaning. Software that links against both
-** SQLite version 2 and SQLite version 3 should use SQLITE3_TEXT, not
-** SQLITE_TEXT.
-*/
-#define SQLITE_INTEGER 1
-#define SQLITE_FLOAT 2
-#define SQLITE_BLOB 4
-#define SQLITE_NULL 5
-#ifdef SQLITE_TEXT
-# undef SQLITE_TEXT
-#else
-# define SQLITE_TEXT 3
-#endif
-#define SQLITE3_TEXT 3
-
-/*
-** CAPI3REF: Result Values From A Query
-** KEYWORDS: {column access functions}
-** METHOD: sqlite3_stmt
-**
-** ^These routines return information about a single column of the current
-** result row of a query. ^In every case the first argument is a pointer
-** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*]
-** that was returned from [sqlite3_prepare_v2()] or one of its variants)
-** and the second argument is the index of the column for which information
-** should be returned. ^The leftmost column of the result set has the index 0.
-** ^The number of columns in the result can be determined using
-** [sqlite3_column_count()].
-**
-** If the SQL statement does not currently point to a valid row, or if the
-** column index is out of range, the result is undefined.
-** These routines may only be called when the most recent call to
-** [sqlite3_step()] has returned [SQLITE_ROW] and neither
-** [sqlite3_reset()] nor [sqlite3_finalize()] have been called subsequently.
-** If any of these routines are called after [sqlite3_reset()] or
-** [sqlite3_finalize()] or after [sqlite3_step()] has returned
-** something other than [SQLITE_ROW], the results are undefined.
-** If [sqlite3_step()] or [sqlite3_reset()] or [sqlite3_finalize()]
-** are called from a different thread while any of these routines
-** are pending, then the results are undefined.
-**
-** ^The sqlite3_column_type() routine returns the
-** [SQLITE_INTEGER | datatype code] for the initial data type
-** of the result column. ^The returned value is one of [SQLITE_INTEGER],
-** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value
-** returned by sqlite3_column_type() is only meaningful if no type
-** conversions have occurred as described below. After a type conversion,
-** the value returned by sqlite3_column_type() is undefined. Future
-** versions of SQLite may change the behavior of sqlite3_column_type()
-** following a type conversion.
-**
-** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes()
-** routine returns the number of bytes in that BLOB or string.
-** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts
-** the string to UTF-8 and then returns the number of bytes.
-** ^If the result is a numeric value then sqlite3_column_bytes() uses
-** [sqlite3_snprintf()] to convert that value to a UTF-8 string and returns
-** the number of bytes in that string.
-** ^If the result is NULL, then sqlite3_column_bytes() returns zero.
-**
-** ^If the result is a BLOB or UTF-16 string then the sqlite3_column_bytes16()
-** routine returns the number of bytes in that BLOB or string.
-** ^If the result is a UTF-8 string, then sqlite3_column_bytes16() converts
-** the string to UTF-16 and then returns the number of bytes.
-** ^If the result is a numeric value then sqlite3_column_bytes16() uses
-** [sqlite3_snprintf()] to convert that value to a UTF-16 string and returns
-** the number of bytes in that string.
-** ^If the result is NULL, then sqlite3_column_bytes16() returns zero.
-**
-** ^The values returned by [sqlite3_column_bytes()] and
-** [sqlite3_column_bytes16()] do not include the zero terminators at the end
-** of the string. ^For clarity: the values returned by
-** [sqlite3_column_bytes()] and [sqlite3_column_bytes16()] are the number of
-** bytes in the string, not the number of characters.
-**
-** ^Strings returned by sqlite3_column_text() and sqlite3_column_text16(),
-** even empty strings, are always zero-terminated. ^The return
-** value from sqlite3_column_blob() for a zero-length BLOB is a NULL pointer.
-**
-** Warning: ^The object returned by [sqlite3_column_value()] is an
-** [unprotected sqlite3_value] object. In a multithreaded environment,
-** an unprotected sqlite3_value object may only be used safely with
-** [sqlite3_bind_value()] and [sqlite3_result_value()].
-** If the [unprotected sqlite3_value] object returned by
-** [sqlite3_column_value()] is used in any other way, including calls
-** to routines like [sqlite3_value_int()], [sqlite3_value_text()],
-** or [sqlite3_value_bytes()], the behavior is not threadsafe.
-**
-** These routines attempt to convert the value where appropriate. ^For
-** example, if the internal representation is FLOAT and a text result
-** is requested, [sqlite3_snprintf()] is used internally to perform the
-** conversion automatically. ^(The following table details the conversions
-** that are applied:
-**
-**
-**
-** Internal
Type | Requested
Type | Conversion
-**
-** |
|---|
| NULL | INTEGER | Result is 0
-** |
| NULL | FLOAT | Result is 0.0
-** |
| NULL | TEXT | Result is a NULL pointer
-** |
| NULL | BLOB | Result is a NULL pointer
-** |
| INTEGER | FLOAT | Convert from integer to float
-** |
| INTEGER | TEXT | ASCII rendering of the integer
-** |
| INTEGER | BLOB | Same as INTEGER->TEXT
-** |
| FLOAT | INTEGER | [CAST] to INTEGER
-** |
| FLOAT | TEXT | ASCII rendering of the float
-** |
| FLOAT | BLOB | [CAST] to BLOB
-** |
| TEXT | INTEGER | [CAST] to INTEGER
-** |
| TEXT | FLOAT | [CAST] to REAL
-** |
| TEXT | BLOB | No change
-** |
| BLOB | INTEGER | [CAST] to INTEGER
-** |
| BLOB | FLOAT | [CAST] to REAL
-** |
| BLOB | TEXT | Add a zero terminator if needed
-** |
-**
)^
-**
-** Note that when type conversions occur, pointers returned by prior
-** calls to sqlite3_column_blob(), sqlite3_column_text(), and/or
-** sqlite3_column_text16() may be invalidated.
-** Type conversions and pointer invalidations might occur
-** in the following cases:
-**
-**
-** - The initial content is a BLOB and sqlite3_column_text() or
-** sqlite3_column_text16() is called. A zero-terminator might
-** need to be added to the string.
-** - The initial content is UTF-8 text and sqlite3_column_bytes16() or
-** sqlite3_column_text16() is called. The content must be converted
-** to UTF-16.
-** - The initial content is UTF-16 text and sqlite3_column_bytes() or
-** sqlite3_column_text() is called. The content must be converted
-** to UTF-8.
-**
-**
-** ^Conversions between UTF-16be and UTF-16le are always done in place and do
-** not invalidate a prior pointer, though of course the content of the buffer
-** that the prior pointer references will have been modified. Other kinds
-** of conversion are done in place when it is possible, but sometimes they
-** are not possible and in those cases prior pointers are invalidated.
-**
-** The safest policy is to invoke these routines
-** in one of the following ways:
-**
-**
-** - sqlite3_column_text() followed by sqlite3_column_bytes()
-** - sqlite3_column_blob() followed by sqlite3_column_bytes()
-** - sqlite3_column_text16() followed by sqlite3_column_bytes16()
-**
-**
-** In other words, you should call sqlite3_column_text(),
-** sqlite3_column_blob(), or sqlite3_column_text16() first to force the result
-** into the desired format, then invoke sqlite3_column_bytes() or
-** sqlite3_column_bytes16() to find the size of the result. Do not mix calls
-** to sqlite3_column_text() or sqlite3_column_blob() with calls to
-** sqlite3_column_bytes16(), and do not mix calls to sqlite3_column_text16()
-** with calls to sqlite3_column_bytes().
-**
-** ^The pointers returned are valid until a type conversion occurs as
-** described above, or until [sqlite3_step()] or [sqlite3_reset()] or
-** [sqlite3_finalize()] is called. ^The memory space used to hold strings
-** and BLOBs is freed automatically. Do not pass the pointers returned
-** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into
-** [sqlite3_free()].
-**
-** ^(If a memory allocation error occurs during the evaluation of any
-** of these routines, a default value is returned. The default value
-** is either the integer 0, the floating point number 0.0, or a NULL
-** pointer. Subsequent calls to [sqlite3_errcode()] will return
-** [SQLITE_NOMEM].)^
-*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_blob(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_bytes16(sqlite3_stmt*, int iCol);
-SQLITE_API double SQLITE_STDCALL sqlite3_column_double(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_int(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_column_int64(sqlite3_stmt*, int iCol);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_column_text(sqlite3_stmt*, int iCol);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_column_text16(sqlite3_stmt*, int iCol);
-SQLITE_API int SQLITE_STDCALL sqlite3_column_type(sqlite3_stmt*, int iCol);
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_column_value(sqlite3_stmt*, int iCol);
-
-/*
-** CAPI3REF: Destroy A Prepared Statement Object
-** DESTRUCTOR: sqlite3_stmt
-**
-** ^The sqlite3_finalize() function is called to delete a [prepared statement].
-** ^If the most recent evaluation of the statement encountered no errors
-** or if the statement is never been evaluated, then sqlite3_finalize() returns
-** SQLITE_OK. ^If the most recent evaluation of statement S failed, then
-** sqlite3_finalize(S) returns the appropriate [error code] or
-** [extended error code].
-**
-** ^The sqlite3_finalize(S) routine can be called at any point during
-** the life cycle of [prepared statement] S:
-** before statement S is ever evaluated, after
-** one or more calls to [sqlite3_reset()], or after any call
-** to [sqlite3_step()] regardless of whether or not the statement has
-** completed execution.
-**
-** ^Invoking sqlite3_finalize() on a NULL pointer is a harmless no-op.
-**
-** The application must finalize every [prepared statement] in order to avoid
-** resource leaks. It is a grievous error for the application to try to use
-** a prepared statement after it has been finalized. Any use of a prepared
-** statement after it has been finalized can result in undefined and
-** undesirable behavior such as segfaults and heap corruption.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_finalize(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Reset A Prepared Statement Object
-** METHOD: sqlite3_stmt
-**
-** The sqlite3_reset() function is called to reset a [prepared statement]
-** object back to its initial state, ready to be re-executed.
-** ^Any SQL statement variables that had values bound to them using
-** the [sqlite3_bind_blob | sqlite3_bind_*() API] retain their values.
-** Use [sqlite3_clear_bindings()] to reset the bindings.
-**
-** ^The [sqlite3_reset(S)] interface resets the [prepared statement] S
-** back to the beginning of its program.
-**
-** ^If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S returned [SQLITE_ROW] or [SQLITE_DONE],
-** or if [sqlite3_step(S)] has never before been called on S,
-** then [sqlite3_reset(S)] returns [SQLITE_OK].
-**
-** ^If the most recent call to [sqlite3_step(S)] for the
-** [prepared statement] S indicated an error, then
-** [sqlite3_reset(S)] returns an appropriate [error code].
-**
-** ^The [sqlite3_reset(S)] interface does not change the values
-** of any [sqlite3_bind_blob|bindings] on the [prepared statement] S.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_reset(sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Create Or Redefine SQL Functions
-** KEYWORDS: {function creation routines}
-** KEYWORDS: {application-defined SQL function}
-** KEYWORDS: {application-defined SQL functions}
-** METHOD: sqlite3
-**
-** ^These functions (collectively known as "function creation routines")
-** are used to add SQL functions or aggregates or to redefine the behavior
-** of existing SQL functions or aggregates. The only differences between
-** these routines are the text encoding expected for
-** the second parameter (the name of the function being created)
-** and the presence or absence of a destructor callback for
-** the application data pointer.
-**
-** ^The first parameter is the [database connection] to which the SQL
-** function is to be added. ^If an application uses more than one database
-** connection then application-defined SQL functions must be added
-** to each database connection separately.
-**
-** ^The second parameter is the name of the SQL function to be created or
-** redefined. ^The length of the name is limited to 255 bytes in a UTF-8
-** representation, exclusive of the zero-terminator. ^Note that the name
-** length limit is in UTF-8 bytes, not characters nor UTF-16 bytes.
-** ^Any attempt to create a function with a longer name
-** will result in [SQLITE_MISUSE] being returned.
-**
-** ^The third parameter (nArg)
-** is the number of arguments that the SQL function or
-** aggregate takes. ^If this parameter is -1, then the SQL function or
-** aggregate may take any number of arguments between 0 and the limit
-** set by [sqlite3_limit]([SQLITE_LIMIT_FUNCTION_ARG]). If the third
-** parameter is less than -1 or greater than 127 then the behavior is
-** undefined.
-**
-** ^The fourth parameter, eTextRep, specifies what
-** [SQLITE_UTF8 | text encoding] this SQL function prefers for
-** its parameters. The application should set this parameter to
-** [SQLITE_UTF16LE] if the function implementation invokes
-** [sqlite3_value_text16le()] on an input, or [SQLITE_UTF16BE] if the
-** implementation invokes [sqlite3_value_text16be()] on an input, or
-** [SQLITE_UTF16] if [sqlite3_value_text16()] is used, or [SQLITE_UTF8]
-** otherwise. ^The same SQL function may be registered multiple times using
-** different preferred text encodings, with different implementations for
-** each encoding.
-** ^When multiple implementations of the same function are available, SQLite
-** will pick the one that involves the least amount of data conversion.
-**
-** ^The fourth parameter may optionally be ORed with [SQLITE_DETERMINISTIC]
-** to signal that the function will always return the same result given
-** the same inputs within a single SQL statement. Most SQL functions are
-** deterministic. The built-in [random()] SQL function is an example of a
-** function that is not deterministic. The SQLite query planner is able to
-** perform additional optimizations on deterministic functions, so use
-** of the [SQLITE_DETERMINISTIC] flag is recommended where possible.
-**
-** ^(The fifth parameter is an arbitrary pointer. The implementation of the
-** function can gain access to this pointer using [sqlite3_user_data()].)^
-**
-** ^The sixth, seventh and eighth parameters, xFunc, xStep and xFinal, are
-** pointers to C-language functions that implement the SQL function or
-** aggregate. ^A scalar SQL function requires an implementation of the xFunc
-** callback only; NULL pointers must be passed as the xStep and xFinal
-** parameters. ^An aggregate SQL function requires an implementation of xStep
-** and xFinal and NULL pointer must be passed for xFunc. ^To delete an existing
-** SQL function or aggregate, pass NULL pointers for all three function
-** callbacks.
-**
-** ^(If the ninth parameter to sqlite3_create_function_v2() is not NULL,
-** then it is destructor for the application data pointer.
-** The destructor is invoked when the function is deleted, either by being
-** overloaded or when the database connection closes.)^
-** ^The destructor is also invoked if the call to
-** sqlite3_create_function_v2() fails.
-** ^When the destructor callback of the tenth parameter is invoked, it
-** is passed a single argument which is a copy of the application data
-** pointer which was the fifth parameter to sqlite3_create_function_v2().
-**
-** ^It is permitted to register multiple implementations of the same
-** functions with the same name but with either differing numbers of
-** arguments or differing preferred text encodings. ^SQLite will use
-** the implementation that most closely matches the way in which the
-** SQL function is used. ^A function implementation with a non-negative
-** nArg parameter is a better match than a function implementation with
-** a negative nArg. ^A function where the preferred text encoding
-** matches the database encoding is a better
-** match than a function where the encoding is different.
-** ^A function where the encoding difference is between UTF16le and UTF16be
-** is a closer match than a function where the encoding difference is
-** between UTF8 and UTF16.
-**
-** ^Built-in functions may be overloaded by new application-defined functions.
-**
-** ^An application-defined function is permitted to call other
-** SQLite interfaces. However, such calls must not
-** close the database connection nor finalize or reset the prepared
-** statement in which the function is running.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function(
- sqlite3 *db,
- const char *zFunctionName,
- int nArg,
- int eTextRep,
- void *pApp,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
- void (*xStep)(sqlite3_context*,int,sqlite3_value**),
- void (*xFinal)(sqlite3_context*)
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function16(
- sqlite3 *db,
- const void *zFunctionName,
- int nArg,
- int eTextRep,
- void *pApp,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
- void (*xStep)(sqlite3_context*,int,sqlite3_value**),
- void (*xFinal)(sqlite3_context*)
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_function_v2(
- sqlite3 *db,
- const char *zFunctionName,
- int nArg,
- int eTextRep,
- void *pApp,
- void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
- void (*xStep)(sqlite3_context*,int,sqlite3_value**),
- void (*xFinal)(sqlite3_context*),
- void(*xDestroy)(void*)
-);
-
-/*
-** CAPI3REF: Text Encodings
-**
-** These constant define integer codes that represent the various
-** text encodings supported by SQLite.
-*/
-#define SQLITE_UTF8 1 /* IMP: R-37514-35566 */
-#define SQLITE_UTF16LE 2 /* IMP: R-03371-37637 */
-#define SQLITE_UTF16BE 3 /* IMP: R-51971-34154 */
-#define SQLITE_UTF16 4 /* Use native byte order */
-#define SQLITE_ANY 5 /* Deprecated */
-#define SQLITE_UTF16_ALIGNED 8 /* sqlite3_create_collation only */
-
-/*
-** CAPI3REF: Function Flags
-**
-** These constants may be ORed together with the
-** [SQLITE_UTF8 | preferred text encoding] as the fourth argument
-** to [sqlite3_create_function()], [sqlite3_create_function16()], or
-** [sqlite3_create_function_v2()].
-*/
-#define SQLITE_DETERMINISTIC 0x800
-
-/*
-** CAPI3REF: Deprecated Functions
-** DEPRECATED
-**
-** These functions are [deprecated]. In order to maintain
-** backwards compatibility with older code, these functions continue
-** to be supported. However, new applications should avoid
-** the use of these functions. To encourage programmers to avoid
-** these functions, we will not explain what they do.
-*/
-#ifndef SQLITE_OMIT_DEPRECATED
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_aggregate_count(sqlite3_context*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_expired(sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_transfer_bindings(sqlite3_stmt*, sqlite3_stmt*);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_global_recover(void);
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_thread_cleanup(void);
-SQLITE_API SQLITE_DEPRECATED int SQLITE_STDCALL sqlite3_memory_alarm(void(*)(void*,sqlite3_int64,int),
- void*,sqlite3_int64);
-#endif
-
-/*
-** CAPI3REF: Obtaining SQL Values
-** METHOD: sqlite3_value
-**
-** The C-language implementation of SQL functions and aggregates uses
-** this set of interface routines to access the parameter values on
-** the function or aggregate.
-**
-** The xFunc (for scalar functions) or xStep (for aggregates) parameters
-** to [sqlite3_create_function()] and [sqlite3_create_function16()]
-** define callbacks that implement the SQL functions and aggregates.
-** The 3rd parameter to these callbacks is an array of pointers to
-** [protected sqlite3_value] objects. There is one [sqlite3_value] object for
-** each parameter to the SQL function. These routines are used to
-** extract values from the [sqlite3_value] objects.
-**
-** These routines work only with [protected sqlite3_value] objects.
-** Any attempt to use these routines on an [unprotected sqlite3_value]
-** object results in undefined behavior.
-**
-** ^These routines work just like the corresponding [column access functions]
-** except that these routines take a single [protected sqlite3_value] object
-** pointer instead of a [sqlite3_stmt*] pointer and an integer column number.
-**
-** ^The sqlite3_value_text16() interface extracts a UTF-16 string
-** in the native byte-order of the host machine. ^The
-** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces
-** extract UTF-16 strings as big-endian and little-endian respectively.
-**
-** ^(The sqlite3_value_numeric_type() interface attempts to apply
-** numeric affinity to the value. This means that an attempt is
-** made to convert the value to an integer or floating point. If
-** such a conversion is possible without loss of information (in other
-** words, if the value is a string that looks like a number)
-** then the conversion is performed. Otherwise no conversion occurs.
-** The [SQLITE_INTEGER | datatype] after conversion is returned.)^
-**
-** Please pay particular attention to the fact that the pointer returned
-** from [sqlite3_value_blob()], [sqlite3_value_text()], or
-** [sqlite3_value_text16()] can be invalidated by a subsequent call to
-** [sqlite3_value_bytes()], [sqlite3_value_bytes16()], [sqlite3_value_text()],
-** or [sqlite3_value_text16()].
-**
-** These routines must be called from the same thread as
-** the SQL function that supplied the [sqlite3_value*] parameters.
-*/
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_blob(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_bytes16(sqlite3_value*);
-SQLITE_API double SQLITE_STDCALL sqlite3_value_double(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_int(sqlite3_value*);
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_value_int64(sqlite3_value*);
-SQLITE_API const unsigned char *SQLITE_STDCALL sqlite3_value_text(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16le(sqlite3_value*);
-SQLITE_API const void *SQLITE_STDCALL sqlite3_value_text16be(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_type(sqlite3_value*);
-SQLITE_API int SQLITE_STDCALL sqlite3_value_numeric_type(sqlite3_value*);
-
-/*
-** CAPI3REF: Finding The Subtype Of SQL Values
-** METHOD: sqlite3_value
-**
-** The sqlite3_value_subtype(V) function returns the subtype for
-** an [application-defined SQL function] argument V. The subtype
-** information can be used to pass a limited amount of context from
-** one SQL function to another. Use the [sqlite3_result_subtype()]
-** routine to set the subtype for the return value of an SQL function.
-**
-** SQLite makes no use of subtype itself. It merely passes the subtype
-** from the result of one [application-defined SQL function] into the
-** input of another.
-*/
-SQLITE_API unsigned int SQLITE_STDCALL sqlite3_value_subtype(sqlite3_value*);
-
-/*
-** CAPI3REF: Copy And Free SQL Values
-** METHOD: sqlite3_value
-**
-** ^The sqlite3_value_dup(V) interface makes a copy of the [sqlite3_value]
-** object D and returns a pointer to that copy. ^The [sqlite3_value] returned
-** is a [protected sqlite3_value] object even if the input is not.
-** ^The sqlite3_value_dup(V) interface returns NULL if V is NULL or if a
-** memory allocation fails.
-**
-** ^The sqlite3_value_free(V) interface frees an [sqlite3_value] object
-** previously obtained from [sqlite3_value_dup()]. ^If V is a NULL pointer
-** then sqlite3_value_free(V) is a harmless no-op.
-*/
-SQLITE_API sqlite3_value *SQLITE_STDCALL sqlite3_value_dup(const sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_value_free(sqlite3_value*);
-
-/*
-** CAPI3REF: Obtain Aggregate Function Context
-** METHOD: sqlite3_context
-**
-** Implementations of aggregate SQL functions use this
-** routine to allocate memory for storing their state.
-**
-** ^The first time the sqlite3_aggregate_context(C,N) routine is called
-** for a particular aggregate function, SQLite
-** allocates N of memory, zeroes out that memory, and returns a pointer
-** to the new memory. ^On second and subsequent calls to
-** sqlite3_aggregate_context() for the same aggregate function instance,
-** the same buffer is returned. Sqlite3_aggregate_context() is normally
-** called once for each invocation of the xStep callback and then one
-** last time when the xFinal callback is invoked. ^(When no rows match
-** an aggregate query, the xStep() callback of the aggregate function
-** implementation is never called and xFinal() is called exactly once.
-** In those cases, sqlite3_aggregate_context() might be called for the
-** first time from within xFinal().)^
-**
-** ^The sqlite3_aggregate_context(C,N) routine returns a NULL pointer
-** when first called if N is less than or equal to zero or if a memory
-** allocate error occurs.
-**
-** ^(The amount of space allocated by sqlite3_aggregate_context(C,N) is
-** determined by the N parameter on first successful call. Changing the
-** value of N in subsequent call to sqlite3_aggregate_context() within
-** the same aggregate function instance will not resize the memory
-** allocation.)^ Within the xFinal callback, it is customary to set
-** N=0 in calls to sqlite3_aggregate_context(C,N) so that no
-** pointless memory allocations occur.
-**
-** ^SQLite automatically frees the memory allocated by
-** sqlite3_aggregate_context() when the aggregate query concludes.
-**
-** The first parameter must be a copy of the
-** [sqlite3_context | SQL function context] that is the first parameter
-** to the xStep or xFinal callback routine that implements the aggregate
-** function.
-**
-** This routine must be called from the same thread in which
-** the aggregate SQL function is running.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_aggregate_context(sqlite3_context*, int nBytes);
-
-/*
-** CAPI3REF: User Data For Functions
-** METHOD: sqlite3_context
-**
-** ^The sqlite3_user_data() interface returns a copy of
-** the pointer that was the pUserData parameter (the 5th parameter)
-** of the [sqlite3_create_function()]
-** and [sqlite3_create_function16()] routines that originally
-** registered the application defined function.
-**
-** This routine must be called from the same thread in which
-** the application-defined function is running.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_user_data(sqlite3_context*);
-
-/*
-** CAPI3REF: Database Connection For Functions
-** METHOD: sqlite3_context
-**
-** ^The sqlite3_context_db_handle() interface returns a copy of
-** the pointer to the [database connection] (the 1st parameter)
-** of the [sqlite3_create_function()]
-** and [sqlite3_create_function16()] routines that originally
-** registered the application defined function.
-*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_context_db_handle(sqlite3_context*);
-
-/*
-** CAPI3REF: Function Auxiliary Data
-** METHOD: sqlite3_context
-**
-** These functions may be used by (non-aggregate) SQL functions to
-** associate metadata with argument values. If the same value is passed to
-** multiple invocations of the same SQL function during query execution, under
-** some circumstances the associated metadata may be preserved. An example
-** of where this might be useful is in a regular-expression matching
-** function. The compiled version of the regular expression can be stored as
-** metadata associated with the pattern string.
-** Then as long as the pattern string remains the same,
-** the compiled regular expression can be reused on multiple
-** invocations of the same function.
-**
-** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata
-** associated by the sqlite3_set_auxdata() function with the Nth argument
-** value to the application-defined function. ^If there is no metadata
-** associated with the function argument, this sqlite3_get_auxdata() interface
-** returns a NULL pointer.
-**
-** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th
-** argument of the application-defined function. ^Subsequent
-** calls to sqlite3_get_auxdata(C,N) return P from the most recent
-** sqlite3_set_auxdata(C,N,P,X) call if the metadata is still valid or
-** NULL if the metadata has been discarded.
-** ^After each call to sqlite3_set_auxdata(C,N,P,X) where X is not NULL,
-** SQLite will invoke the destructor function X with parameter P exactly
-** once, when the metadata is discarded.
-** SQLite is free to discard the metadata at any time, including:
-** - when the corresponding function parameter changes, or
-**
- when [sqlite3_reset()] or [sqlite3_finalize()] is called for the
-** SQL statement, or
-**
- when sqlite3_set_auxdata() is invoked again on the same parameter, or
-**
- during the original sqlite3_set_auxdata() call when a memory
-** allocation error occurs.
)^
-**
-** Note the last bullet in particular. The destructor X in
-** sqlite3_set_auxdata(C,N,P,X) might be called immediately, before the
-** sqlite3_set_auxdata() interface even returns. Hence sqlite3_set_auxdata()
-** should be called near the end of the function implementation and the
-** function implementation should not make any use of P after
-** sqlite3_set_auxdata() has been called.
-**
-** ^(In practice, metadata is preserved between function calls for
-** function parameters that are compile-time constants, including literal
-** values and [parameters] and expressions composed from the same.)^
-**
-** These routines must be called from the same thread in which
-** the SQL function is running.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_get_auxdata(sqlite3_context*, int N);
-SQLITE_API void SQLITE_STDCALL sqlite3_set_auxdata(sqlite3_context*, int N, void*, void (*)(void*));
-
-
-/*
-** CAPI3REF: Constants Defining Special Destructor Behavior
-**
-** These are special values for the destructor that is passed in as the
-** final argument to routines like [sqlite3_result_blob()]. ^If the destructor
-** argument is SQLITE_STATIC, it means that the content pointer is constant
-** and will never change. It does not need to be destroyed. ^The
-** SQLITE_TRANSIENT value means that the content will likely change in
-** the near future and that SQLite should make its own private copy of
-** the content before returning.
-**
-** The typedef is necessary to work around problems in certain
-** C++ compilers.
-*/
-typedef void (*sqlite3_destructor_type)(void*);
-#define SQLITE_STATIC ((sqlite3_destructor_type)0)
-#define SQLITE_TRANSIENT ((sqlite3_destructor_type)-1)
-
-/*
-** CAPI3REF: Setting The Result Of An SQL Function
-** METHOD: sqlite3_context
-**
-** These routines are used by the xFunc or xFinal callbacks that
-** implement SQL functions and aggregates. See
-** [sqlite3_create_function()] and [sqlite3_create_function16()]
-** for additional information.
-**
-** These functions work very much like the [parameter binding] family of
-** functions used to bind values to host parameters in prepared statements.
-** Refer to the [SQL parameter] documentation for additional information.
-**
-** ^The sqlite3_result_blob() interface sets the result from
-** an application-defined function to be the BLOB whose content is pointed
-** to by the second parameter and which is N bytes long where N is the
-** third parameter.
-**
-** ^The sqlite3_result_zeroblob(C,N) and sqlite3_result_zeroblob64(C,N)
-** interfaces set the result of the application-defined function to be
-** a BLOB containing all zero bytes and N bytes in size.
-**
-** ^The sqlite3_result_double() interface sets the result from
-** an application-defined function to be a floating point value specified
-** by its 2nd argument.
-**
-** ^The sqlite3_result_error() and sqlite3_result_error16() functions
-** cause the implemented SQL function to throw an exception.
-** ^SQLite uses the string pointed to by the
-** 2nd parameter of sqlite3_result_error() or sqlite3_result_error16()
-** as the text of an error message. ^SQLite interprets the error
-** message string from sqlite3_result_error() as UTF-8. ^SQLite
-** interprets the string from sqlite3_result_error16() as UTF-16 in native
-** byte order. ^If the third parameter to sqlite3_result_error()
-** or sqlite3_result_error16() is negative then SQLite takes as the error
-** message all text up through the first zero character.
-** ^If the third parameter to sqlite3_result_error() or
-** sqlite3_result_error16() is non-negative then SQLite takes that many
-** bytes (not characters) from the 2nd parameter as the error message.
-** ^The sqlite3_result_error() and sqlite3_result_error16()
-** routines make a private copy of the error message text before
-** they return. Hence, the calling function can deallocate or
-** modify the text after they return without harm.
-** ^The sqlite3_result_error_code() function changes the error code
-** returned by SQLite as a result of an error in a function. ^By default,
-** the error code is SQLITE_ERROR. ^A subsequent call to sqlite3_result_error()
-** or sqlite3_result_error16() resets the error code to SQLITE_ERROR.
-**
-** ^The sqlite3_result_error_toobig() interface causes SQLite to throw an
-** error indicating that a string or BLOB is too long to represent.
-**
-** ^The sqlite3_result_error_nomem() interface causes SQLite to throw an
-** error indicating that a memory allocation failed.
-**
-** ^The sqlite3_result_int() interface sets the return value
-** of the application-defined function to be the 32-bit signed integer
-** value given in the 2nd argument.
-** ^The sqlite3_result_int64() interface sets the return value
-** of the application-defined function to be the 64-bit signed integer
-** value given in the 2nd argument.
-**
-** ^The sqlite3_result_null() interface sets the return value
-** of the application-defined function to be NULL.
-**
-** ^The sqlite3_result_text(), sqlite3_result_text16(),
-** sqlite3_result_text16le(), and sqlite3_result_text16be() interfaces
-** set the return value of the application-defined function to be
-** a text string which is represented as UTF-8, UTF-16 native byte order,
-** UTF-16 little endian, or UTF-16 big endian, respectively.
-** ^The sqlite3_result_text64() interface sets the return value of an
-** application-defined function to be a text string in an encoding
-** specified by the fifth (and last) parameter, which must be one
-** of [SQLITE_UTF8], [SQLITE_UTF16], [SQLITE_UTF16BE], or [SQLITE_UTF16LE].
-** ^SQLite takes the text result from the application from
-** the 2nd parameter of the sqlite3_result_text* interfaces.
-** ^If the 3rd parameter to the sqlite3_result_text* interfaces
-** is negative, then SQLite takes result text from the 2nd parameter
-** through the first zero character.
-** ^If the 3rd parameter to the sqlite3_result_text* interfaces
-** is non-negative, then as many bytes (not characters) of the text
-** pointed to by the 2nd parameter are taken as the application-defined
-** function result. If the 3rd parameter is non-negative, then it
-** must be the byte offset into the string where the NUL terminator would
-** appear if the string where NUL terminated. If any NUL characters occur
-** in the string at a byte offset that is less than the value of the 3rd
-** parameter, then the resulting string will contain embedded NULs and the
-** result of expressions operating on strings with embedded NULs is undefined.
-** ^If the 4th parameter to the sqlite3_result_text* interfaces
-** or sqlite3_result_blob is a non-NULL pointer, then SQLite calls that
-** function as the destructor on the text or BLOB result when it has
-** finished using that result.
-** ^If the 4th parameter to the sqlite3_result_text* interfaces or to
-** sqlite3_result_blob is the special constant SQLITE_STATIC, then SQLite
-** assumes that the text or BLOB result is in constant space and does not
-** copy the content of the parameter nor call a destructor on the content
-** when it has finished using that result.
-** ^If the 4th parameter to the sqlite3_result_text* interfaces
-** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT
-** then SQLite makes a copy of the result into space obtained from
-** from [sqlite3_malloc()] before it returns.
-**
-** ^The sqlite3_result_value() interface sets the result of
-** the application-defined function to be a copy of the
-** [unprotected sqlite3_value] object specified by the 2nd parameter. ^The
-** sqlite3_result_value() interface makes a copy of the [sqlite3_value]
-** so that the [sqlite3_value] specified in the parameter may change or
-** be deallocated after sqlite3_result_value() returns without harm.
-** ^A [protected sqlite3_value] object may always be used where an
-** [unprotected sqlite3_value] object is required, so either
-** kind of [sqlite3_value] object can be used with this interface.
-**
-** If these routines are called from within the different thread
-** than the one containing the application-defined function that received
-** the [sqlite3_context] pointer, the results are undefined.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_blob64(sqlite3_context*,const void*,
- sqlite3_uint64,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_double(sqlite3_context*, double);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error(sqlite3_context*, const char*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error16(sqlite3_context*, const void*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_toobig(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_nomem(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_error_code(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int(sqlite3_context*, int);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_int64(sqlite3_context*, sqlite3_int64);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_null(sqlite3_context*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text(sqlite3_context*, const char*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text64(sqlite3_context*, const char*,sqlite3_uint64,
- void(*)(void*), unsigned char encoding);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16(sqlite3_context*, const void*, int, void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*));
-SQLITE_API void SQLITE_STDCALL sqlite3_result_value(sqlite3_context*, sqlite3_value*);
-SQLITE_API void SQLITE_STDCALL sqlite3_result_zeroblob(sqlite3_context*, int n);
-SQLITE_API int SQLITE_STDCALL sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n);
-
-
-/*
-** CAPI3REF: Setting The Subtype Of An SQL Function
-** METHOD: sqlite3_context
-**
-** The sqlite3_result_subtype(C,T) function causes the subtype of
-** the result from the [application-defined SQL function] with
-** [sqlite3_context] C to be the value T. Only the lower 8 bits
-** of the subtype T are preserved in current versions of SQLite;
-** higher order bits are discarded.
-** The number of subtype bytes preserved by SQLite might increase
-** in future releases of SQLite.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_result_subtype(sqlite3_context*,unsigned int);
-
-/*
-** CAPI3REF: Define New Collating Sequences
-** METHOD: sqlite3
-**
-** ^These functions add, remove, or modify a [collation] associated
-** with the [database connection] specified as the first argument.
-**
-** ^The name of the collation is a UTF-8 string
-** for sqlite3_create_collation() and sqlite3_create_collation_v2()
-** and a UTF-16 string in native byte order for sqlite3_create_collation16().
-** ^Collation names that compare equal according to [sqlite3_strnicmp()] are
-** considered to be the same name.
-**
-** ^(The third argument (eTextRep) must be one of the constants:
-**
-** - [SQLITE_UTF8],
-**
- [SQLITE_UTF16LE],
-**
- [SQLITE_UTF16BE],
-**
- [SQLITE_UTF16], or
-**
- [SQLITE_UTF16_ALIGNED].
-**
)^
-** ^The eTextRep argument determines the encoding of strings passed
-** to the collating function callback, xCallback.
-** ^The [SQLITE_UTF16] and [SQLITE_UTF16_ALIGNED] values for eTextRep
-** force strings to be UTF16 with native byte order.
-** ^The [SQLITE_UTF16_ALIGNED] value for eTextRep forces strings to begin
-** on an even byte address.
-**
-** ^The fourth argument, pArg, is an application data pointer that is passed
-** through as the first argument to the collating function callback.
-**
-** ^The fifth argument, xCallback, is a pointer to the collating function.
-** ^Multiple collating functions can be registered using the same name but
-** with different eTextRep parameters and SQLite will use whichever
-** function requires the least amount of data transformation.
-** ^If the xCallback argument is NULL then the collating function is
-** deleted. ^When all collating functions having the same name are deleted,
-** that collation is no longer usable.
-**
-** ^The collating function callback is invoked with a copy of the pArg
-** application data pointer and with two strings in the encoding specified
-** by the eTextRep argument. The collating function must return an
-** integer that is negative, zero, or positive
-** if the first string is less than, equal to, or greater than the second,
-** respectively. A collating function must always return the same answer
-** given the same inputs. If two or more collating functions are registered
-** to the same collation name (using different eTextRep values) then all
-** must give an equivalent answer when invoked with equivalent strings.
-** The collating function must obey the following properties for all
-** strings A, B, and C:
-**
-**
-** - If A==B then B==A.
-**
- If A==B and B==C then A==C.
-**
- If A<B THEN B>A.
-**
- If A<B and B<C then A<C.
-**
-**
-** If a collating function fails any of the above constraints and that
-** collating function is registered and used, then the behavior of SQLite
-** is undefined.
-**
-** ^The sqlite3_create_collation_v2() works like sqlite3_create_collation()
-** with the addition that the xDestroy callback is invoked on pArg when
-** the collating function is deleted.
-** ^Collating functions are deleted when they are overridden by later
-** calls to the collation creation functions or when the
-** [database connection] is closed using [sqlite3_close()].
-**
-** ^The xDestroy callback is not called if the
-** sqlite3_create_collation_v2() function fails. Applications that invoke
-** sqlite3_create_collation_v2() with a non-NULL xDestroy argument should
-** check the return code and dispose of the application data pointer
-** themselves rather than expecting SQLite to deal with it for them.
-** This is different from every other SQLite interface. The inconsistency
-** is unfortunate but cannot be changed without breaking backwards
-** compatibility.
-**
-** See also: [sqlite3_collation_needed()] and [sqlite3_collation_needed16()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation(
- sqlite3*,
- const char *zName,
- int eTextRep,
- void *pArg,
- int(*xCompare)(void*,int,const void*,int,const void*)
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation_v2(
- sqlite3*,
- const char *zName,
- int eTextRep,
- void *pArg,
- int(*xCompare)(void*,int,const void*,int,const void*),
- void(*xDestroy)(void*)
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_collation16(
- sqlite3*,
- const void *zName,
- int eTextRep,
- void *pArg,
- int(*xCompare)(void*,int,const void*,int,const void*)
-);
-
-/*
-** CAPI3REF: Collation Needed Callbacks
-** METHOD: sqlite3
-**
-** ^To avoid having to register all collation sequences before a database
-** can be used, a single callback function may be registered with the
-** [database connection] to be invoked whenever an undefined collation
-** sequence is required.
-**
-** ^If the function is registered using the sqlite3_collation_needed() API,
-** then it is passed the names of undefined collation sequences as strings
-** encoded in UTF-8. ^If sqlite3_collation_needed16() is used,
-** the names are passed as UTF-16 in machine native byte order.
-** ^A call to either function replaces the existing collation-needed callback.
-**
-** ^(When the callback is invoked, the first argument passed is a copy
-** of the second argument to sqlite3_collation_needed() or
-** sqlite3_collation_needed16(). The second argument is the database
-** connection. The third argument is one of [SQLITE_UTF8], [SQLITE_UTF16BE],
-** or [SQLITE_UTF16LE], indicating the most desirable form of the collation
-** sequence function required. The fourth parameter is the name of the
-** required collation sequence.)^
-**
-** The callback function should register the desired collation using
-** [sqlite3_create_collation()], [sqlite3_create_collation16()], or
-** [sqlite3_create_collation_v2()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed(
- sqlite3*,
- void*,
- void(*)(void*,sqlite3*,int eTextRep,const char*)
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_collation_needed16(
- sqlite3*,
- void*,
- void(*)(void*,sqlite3*,int eTextRep,const void*)
-);
-
-#ifdef SQLITE_HAS_CODEC
-/*
-** Specify the key for an encrypted database. This routine should be
-** called right after sqlite3_open().
-**
-** The code to implement this API is not available in the public release
-** of SQLite.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_key(
- sqlite3 *db, /* Database to be rekeyed */
- const void *pKey, int nKey /* The key */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_key_v2(
- sqlite3 *db, /* Database to be rekeyed */
- const char *zDbName, /* Name of the database */
- const void *pKey, int nKey /* The key */
-);
-
-/*
-** Change the key on an open database. If the current database is not
-** encrypted, this routine will encrypt it. If pNew==0 or nNew==0, the
-** database is decrypted.
-**
-** The code to implement this API is not available in the public release
-** of SQLite.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey(
- sqlite3 *db, /* Database to be rekeyed */
- const void *pKey, int nKey /* The new key */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_rekey_v2(
- sqlite3 *db, /* Database to be rekeyed */
- const char *zDbName, /* Name of the database */
- const void *pKey, int nKey /* The new key */
-);
-
-/*
-** Specify the activation key for a SEE database. Unless
-** activated, none of the SEE routines will work.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_see(
- const char *zPassPhrase /* Activation phrase */
-);
-#endif
-
-#ifdef SQLITE_ENABLE_CEROD
-/*
-** Specify the activation key for a CEROD database. Unless
-** activated, none of the CEROD routines will work.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_activate_cerod(
- const char *zPassPhrase /* Activation phrase */
-);
-#endif
-
-/*
-** CAPI3REF: Suspend Execution For A Short Time
-**
-** The sqlite3_sleep() function causes the current thread to suspend execution
-** for at least a number of milliseconds specified in its parameter.
-**
-** If the operating system does not support sleep requests with
-** millisecond time resolution, then the time will be rounded up to
-** the nearest second. The number of milliseconds of sleep actually
-** requested from the operating system is returned.
-**
-** ^SQLite implements this interface by calling the xSleep()
-** method of the default [sqlite3_vfs] object. If the xSleep() method
-** of the default VFS is not implemented correctly, or not implemented at
-** all, then the behavior of sqlite3_sleep() may deviate from the description
-** in the previous paragraphs.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_sleep(int);
-
-/*
-** CAPI3REF: Name Of The Folder Holding Temporary Files
-**
-** ^(If this global variable is made to point to a string which is
-** the name of a folder (a.k.a. directory), then all temporary files
-** created by SQLite when using a built-in [sqlite3_vfs | VFS]
-** will be placed in that directory.)^ ^If this variable
-** is a NULL pointer, then SQLite performs a search for an appropriate
-** temporary file directory.
-**
-** Applications are strongly discouraged from using this global variable.
-** It is required to set a temporary folder on Windows Runtime (WinRT).
-** But for all other platforms, it is highly recommended that applications
-** neither read nor write this variable. This global variable is a relic
-** that exists for backwards compatibility of legacy applications and should
-** be avoided in new projects.
-**
-** It is not safe to read or modify this variable in more than one
-** thread at a time. It is not safe to read or modify this variable
-** if a [database connection] is being used at the same time in a separate
-** thread.
-** It is intended that this variable be set once
-** as part of process initialization and before any SQLite interface
-** routines have been called and that this variable remain unchanged
-** thereafter.
-**
-** ^The [temp_store_directory pragma] may modify this variable and cause
-** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
-** the [temp_store_directory pragma] always assumes that any string
-** that this variable points to is held in memory obtained from
-** [sqlite3_malloc] and the pragma may attempt to free that memory
-** using [sqlite3_free].
-** Hence, if this variable is modified directly, either it should be
-** made NULL or made to point to memory obtained from [sqlite3_malloc]
-** or else the use of the [temp_store_directory pragma] should be avoided.
-** Except when requested by the [temp_store_directory pragma], SQLite
-** does not free the memory that sqlite3_temp_directory points to. If
-** the application wants that memory to be freed, it must do
-** so itself, taking care to only do so after all [database connection]
-** objects have been destroyed.
-**
-** Note to Windows Runtime users: The temporary directory must be set
-** prior to calling [sqlite3_open] or [sqlite3_open_v2]. Otherwise, various
-** features that require the use of temporary files may fail. Here is an
-** example of how to do this using C++ with the Windows Runtime:
-**
-**
-** LPCWSTR zPath = Windows::Storage::ApplicationData::Current->
-** TemporaryFolder->Path->Data();
-** char zPathBuf[MAX_PATH + 1];
-** memset(zPathBuf, 0, sizeof(zPathBuf));
-** WideCharToMultiByte(CP_UTF8, 0, zPath, -1, zPathBuf, sizeof(zPathBuf),
-** NULL, NULL);
-** sqlite3_temp_directory = sqlite3_mprintf("%s", zPathBuf);
-**
-*/
-SQLITE_API char *sqlite3_temp_directory;
-
-/*
-** CAPI3REF: Name Of The Folder Holding Database Files
-**
-** ^(If this global variable is made to point to a string which is
-** the name of a folder (a.k.a. directory), then all database files
-** specified with a relative pathname and created or accessed by
-** SQLite when using a built-in windows [sqlite3_vfs | VFS] will be assumed
-** to be relative to that directory.)^ ^If this variable is a NULL
-** pointer, then SQLite assumes that all database files specified
-** with a relative pathname are relative to the current directory
-** for the process. Only the windows VFS makes use of this global
-** variable; it is ignored by the unix VFS.
-**
-** Changing the value of this variable while a database connection is
-** open can result in a corrupt database.
-**
-** It is not safe to read or modify this variable in more than one
-** thread at a time. It is not safe to read or modify this variable
-** if a [database connection] is being used at the same time in a separate
-** thread.
-** It is intended that this variable be set once
-** as part of process initialization and before any SQLite interface
-** routines have been called and that this variable remain unchanged
-** thereafter.
-**
-** ^The [data_store_directory pragma] may modify this variable and cause
-** it to point to memory obtained from [sqlite3_malloc]. ^Furthermore,
-** the [data_store_directory pragma] always assumes that any string
-** that this variable points to is held in memory obtained from
-** [sqlite3_malloc] and the pragma may attempt to free that memory
-** using [sqlite3_free].
-** Hence, if this variable is modified directly, either it should be
-** made NULL or made to point to memory obtained from [sqlite3_malloc]
-** or else the use of the [data_store_directory pragma] should be avoided.
-*/
-SQLITE_API char *sqlite3_data_directory;
-
-/*
-** CAPI3REF: Test For Auto-Commit Mode
-** KEYWORDS: {autocommit mode}
-** METHOD: sqlite3
-**
-** ^The sqlite3_get_autocommit() interface returns non-zero or
-** zero if the given database connection is or is not in autocommit mode,
-** respectively. ^Autocommit mode is on by default.
-** ^Autocommit mode is disabled by a [BEGIN] statement.
-** ^Autocommit mode is re-enabled by a [COMMIT] or [ROLLBACK].
-**
-** If certain kinds of errors occur on a statement within a multi-statement
-** transaction (errors including [SQLITE_FULL], [SQLITE_IOERR],
-** [SQLITE_NOMEM], [SQLITE_BUSY], and [SQLITE_INTERRUPT]) then the
-** transaction might be rolled back automatically. The only way to
-** find out whether SQLite automatically rolled back the transaction after
-** an error is to use this function.
-**
-** If another thread changes the autocommit status of the database
-** connection while this routine is running, then the return value
-** is undefined.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_get_autocommit(sqlite3*);
-
-/*
-** CAPI3REF: Find The Database Handle Of A Prepared Statement
-** METHOD: sqlite3_stmt
-**
-** ^The sqlite3_db_handle interface returns the [database connection] handle
-** to which a [prepared statement] belongs. ^The [database connection]
-** returned by sqlite3_db_handle is the same [database connection]
-** that was the first argument
-** to the [sqlite3_prepare_v2()] call (or its variants) that was used to
-** create the statement in the first place.
-*/
-SQLITE_API sqlite3 *SQLITE_STDCALL sqlite3_db_handle(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Return The Filename For A Database Connection
-** METHOD: sqlite3
-**
-** ^The sqlite3_db_filename(D,N) interface returns a pointer to a filename
-** associated with database N of connection D. ^The main database file
-** has the name "main". If there is no attached database N on the database
-** connection D, or if database N is a temporary or in-memory database, then
-** a NULL pointer is returned.
-**
-** ^The filename returned by this function is the output of the
-** xFullPathname method of the [VFS]. ^In other words, the filename
-** will be an absolute pathname, even if the filename used
-** to open the database originally was a URI or relative pathname.
-*/
-SQLITE_API const char *SQLITE_STDCALL sqlite3_db_filename(sqlite3 *db, const char *zDbName);
-
-/*
-** CAPI3REF: Determine if a database is read-only
-** METHOD: sqlite3
-**
-** ^The sqlite3_db_readonly(D,N) interface returns 1 if the database N
-** of connection D is read-only, 0 if it is read/write, or -1 if N is not
-** the name of a database on connection D.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_readonly(sqlite3 *db, const char *zDbName);
-
-/*
-** CAPI3REF: Find the next prepared statement
-** METHOD: sqlite3
-**
-** ^This interface returns a pointer to the next [prepared statement] after
-** pStmt associated with the [database connection] pDb. ^If pStmt is NULL
-** then this interface returns a pointer to the first prepared statement
-** associated with the database connection pDb. ^If no prepared statement
-** satisfies the conditions of this routine, it returns NULL.
-**
-** The [database connection] pointer D in a call to
-** [sqlite3_next_stmt(D,S)] must refer to an open database
-** connection and in particular must not be a NULL pointer.
-*/
-SQLITE_API sqlite3_stmt *SQLITE_STDCALL sqlite3_next_stmt(sqlite3 *pDb, sqlite3_stmt *pStmt);
-
-/*
-** CAPI3REF: Commit And Rollback Notification Callbacks
-** METHOD: sqlite3
-**
-** ^The sqlite3_commit_hook() interface registers a callback
-** function to be invoked whenever a transaction is [COMMIT | committed].
-** ^Any callback set by a previous call to sqlite3_commit_hook()
-** for the same database connection is overridden.
-** ^The sqlite3_rollback_hook() interface registers a callback
-** function to be invoked whenever a transaction is [ROLLBACK | rolled back].
-** ^Any callback set by a previous call to sqlite3_rollback_hook()
-** for the same database connection is overridden.
-** ^The pArg argument is passed through to the callback.
-** ^If the callback on a commit hook function returns non-zero,
-** then the commit is converted into a rollback.
-**
-** ^The sqlite3_commit_hook(D,C,P) and sqlite3_rollback_hook(D,C,P) functions
-** return the P argument from the previous call of the same function
-** on the same [database connection] D, or NULL for
-** the first call for each function on D.
-**
-** The commit and rollback hook callbacks are not reentrant.
-** The callback implementation must not do anything that will modify
-** the database connection that invoked the callback. Any actions
-** to modify the database connection must be deferred until after the
-** completion of the [sqlite3_step()] call that triggered the commit
-** or rollback hook in the first place.
-** Note that running any other SQL statements, including SELECT statements,
-** or merely calling [sqlite3_prepare_v2()] and [sqlite3_step()] will modify
-** the database connections for the meaning of "modify" in this paragraph.
-**
-** ^Registering a NULL function disables the callback.
-**
-** ^When the commit hook callback routine returns zero, the [COMMIT]
-** operation is allowed to continue normally. ^If the commit hook
-** returns non-zero, then the [COMMIT] is converted into a [ROLLBACK].
-** ^The rollback hook is invoked on a rollback that results from a commit
-** hook returning non-zero, just as it would be with any other rollback.
-**
-** ^For the purposes of this API, a transaction is said to have been
-** rolled back if an explicit "ROLLBACK" statement is executed, or
-** an error or constraint causes an implicit rollback to occur.
-** ^The rollback callback is not invoked if a transaction is
-** automatically rolled back because the database connection is closed.
-**
-** See also the [sqlite3_update_hook()] interface.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_commit_hook(sqlite3*, int(*)(void*), void*);
-SQLITE_API void *SQLITE_STDCALL sqlite3_rollback_hook(sqlite3*, void(*)(void *), void*);
-
-/*
-** CAPI3REF: Data Change Notification Callbacks
-** METHOD: sqlite3
-**
-** ^The sqlite3_update_hook() interface registers a callback function
-** with the [database connection] identified by the first argument
-** to be invoked whenever a row is updated, inserted or deleted in
-** a [rowid table].
-** ^Any callback set by a previous call to this function
-** for the same database connection is overridden.
-**
-** ^The second argument is a pointer to the function to invoke when a
-** row is updated, inserted or deleted in a rowid table.
-** ^The first argument to the callback is a copy of the third argument
-** to sqlite3_update_hook().
-** ^The second callback argument is one of [SQLITE_INSERT], [SQLITE_DELETE],
-** or [SQLITE_UPDATE], depending on the operation that caused the callback
-** to be invoked.
-** ^The third and fourth arguments to the callback contain pointers to the
-** database and table name containing the affected row.
-** ^The final callback parameter is the [rowid] of the row.
-** ^In the case of an update, this is the [rowid] after the update takes place.
-**
-** ^(The update hook is not invoked when internal system tables are
-** modified (i.e. sqlite_master and sqlite_sequence).)^
-** ^The update hook is not invoked when [WITHOUT ROWID] tables are modified.
-**
-** ^In the current implementation, the update hook
-** is not invoked when duplication rows are deleted because of an
-** [ON CONFLICT | ON CONFLICT REPLACE] clause. ^Nor is the update hook
-** invoked when rows are deleted using the [truncate optimization].
-** The exceptions defined in this paragraph might change in a future
-** release of SQLite.
-**
-** The update hook implementation must not do anything that will modify
-** the database connection that invoked the update hook. Any actions
-** to modify the database connection must be deferred until after the
-** completion of the [sqlite3_step()] call that triggered the update hook.
-** Note that [sqlite3_prepare_v2()] and [sqlite3_step()] both modify their
-** database connections for the meaning of "modify" in this paragraph.
-**
-** ^The sqlite3_update_hook(D,C,P) function
-** returns the P argument from the previous call
-** on the same [database connection] D, or NULL for
-** the first call on D.
-**
-** See also the [sqlite3_commit_hook()], [sqlite3_rollback_hook()],
-** and [sqlite3_preupdate_hook()] interfaces.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_update_hook(
- sqlite3*,
- void(*)(void *,int ,char const *,char const *,sqlite3_int64),
- void*
-);
-
-/*
-** CAPI3REF: Enable Or Disable Shared Pager Cache
-**
-** ^(This routine enables or disables the sharing of the database cache
-** and schema data structures between [database connection | connections]
-** to the same database. Sharing is enabled if the argument is true
-** and disabled if the argument is false.)^
-**
-** ^Cache sharing is enabled and disabled for an entire process.
-** This is a change as of SQLite version 3.5.0. In prior versions of SQLite,
-** sharing was enabled or disabled for each thread separately.
-**
-** ^(The cache sharing mode set by this interface effects all subsequent
-** calls to [sqlite3_open()], [sqlite3_open_v2()], and [sqlite3_open16()].
-** Existing database connections continue use the sharing mode
-** that was in effect at the time they were opened.)^
-**
-** ^(This routine returns [SQLITE_OK] if shared cache was enabled or disabled
-** successfully. An [error code] is returned otherwise.)^
-**
-** ^Shared cache is disabled by default. But this might change in
-** future releases of SQLite. Applications that care about shared
-** cache setting should set it explicitly.
-**
-** Note: This method is disabled on MacOS X 10.7 and iOS version 5.0
-** and will always return SQLITE_MISUSE. On those systems,
-** shared cache mode should be enabled per-database connection via
-** [sqlite3_open_v2()] with [SQLITE_OPEN_SHAREDCACHE].
-**
-** This interface is threadsafe on processors where writing a
-** 32-bit integer is atomic.
-**
-** See Also: [SQLite Shared-Cache Mode]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_shared_cache(int);
-
-/*
-** CAPI3REF: Attempt To Free Heap Memory
-**
-** ^The sqlite3_release_memory() interface attempts to free N bytes
-** of heap memory by deallocating non-essential memory allocations
-** held by the database library. Memory used to cache database
-** pages to improve performance is an example of non-essential memory.
-** ^sqlite3_release_memory() returns the number of bytes actually freed,
-** which might be more or less than the amount requested.
-** ^The sqlite3_release_memory() routine is a no-op returning zero
-** if SQLite is not compiled with [SQLITE_ENABLE_MEMORY_MANAGEMENT].
-**
-** See also: [sqlite3_db_release_memory()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int);
-
-/*
-** CAPI3REF: Free Memory Used By A Database Connection
-** METHOD: sqlite3
-**
-** ^The sqlite3_db_release_memory(D) interface attempts to free as much heap
-** memory as possible from database connection D. Unlike the
-** [sqlite3_release_memory()] interface, this interface is in effect even
-** when the [SQLITE_ENABLE_MEMORY_MANAGEMENT] compile-time option is
-** omitted.
-**
-** See also: [sqlite3_release_memory()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_release_memory(sqlite3*);
-
-/*
-** CAPI3REF: Impose A Limit On Heap Size
-**
-** ^The sqlite3_soft_heap_limit64() interface sets and/or queries the
-** soft limit on the amount of heap memory that may be allocated by SQLite.
-** ^SQLite strives to keep heap memory utilization below the soft heap
-** limit by reducing the number of pages held in the page cache
-** as heap memory usages approaches the limit.
-** ^The soft heap limit is "soft" because even though SQLite strives to stay
-** below the limit, it will exceed the limit rather than generate
-** an [SQLITE_NOMEM] error. In other words, the soft heap limit
-** is advisory only.
-**
-** ^The return value from sqlite3_soft_heap_limit64() is the size of
-** the soft heap limit prior to the call, or negative in the case of an
-** error. ^If the argument N is negative
-** then no change is made to the soft heap limit. Hence, the current
-** size of the soft heap limit can be determined by invoking
-** sqlite3_soft_heap_limit64() with a negative argument.
-**
-** ^If the argument N is zero then the soft heap limit is disabled.
-**
-** ^(The soft heap limit is not enforced in the current implementation
-** if one or more of following conditions are true:
-**
-**
-** - The soft heap limit is set to zero.
-**
- Memory accounting is disabled using a combination of the
-** [sqlite3_config]([SQLITE_CONFIG_MEMSTATUS],...) start-time option and
-** the [SQLITE_DEFAULT_MEMSTATUS] compile-time option.
-**
- An alternative page cache implementation is specified using
-** [sqlite3_config]([SQLITE_CONFIG_PCACHE2],...).
-**
- The page cache allocates from its own memory pool supplied
-** by [sqlite3_config]([SQLITE_CONFIG_PAGECACHE],...) rather than
-** from the heap.
-**
)^
-**
-** Beginning with SQLite version 3.7.3, the soft heap limit is enforced
-** regardless of whether or not the [SQLITE_ENABLE_MEMORY_MANAGEMENT]
-** compile-time option is invoked. With [SQLITE_ENABLE_MEMORY_MANAGEMENT],
-** the soft heap limit is enforced on every memory allocation. Without
-** [SQLITE_ENABLE_MEMORY_MANAGEMENT], the soft heap limit is only enforced
-** when memory is allocated by the page cache. Testing suggests that because
-** the page cache is the predominate memory user in SQLite, most
-** applications will achieve adequate soft heap limit enforcement without
-** the use of [SQLITE_ENABLE_MEMORY_MANAGEMENT].
-**
-** The circumstances under which SQLite will enforce the soft heap limit may
-** changes in future releases of SQLite.
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 N);
-
-/*
-** CAPI3REF: Deprecated Soft Heap Limit Interface
-** DEPRECATED
-**
-** This is a deprecated version of the [sqlite3_soft_heap_limit64()]
-** interface. This routine is provided for historical compatibility
-** only. All new applications should use the
-** [sqlite3_soft_heap_limit64()] interface rather than this one.
-*/
-SQLITE_API SQLITE_DEPRECATED void SQLITE_STDCALL sqlite3_soft_heap_limit(int N);
-
-
-/*
-** CAPI3REF: Extract Metadata About A Column Of A Table
-** METHOD: sqlite3
-**
-** ^(The sqlite3_table_column_metadata(X,D,T,C,....) routine returns
-** information about column C of table T in database D
-** on [database connection] X.)^ ^The sqlite3_table_column_metadata()
-** interface returns SQLITE_OK and fills in the non-NULL pointers in
-** the final five arguments with appropriate values if the specified
-** column exists. ^The sqlite3_table_column_metadata() interface returns
-** SQLITE_ERROR and if the specified column does not exist.
-** ^If the column-name parameter to sqlite3_table_column_metadata() is a
-** NULL pointer, then this routine simply checks for the existance of the
-** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it
-** does not.
-**
-** ^The column is identified by the second, third and fourth parameters to
-** this function. ^(The second parameter is either the name of the database
-** (i.e. "main", "temp", or an attached database) containing the specified
-** table or NULL.)^ ^If it is NULL, then all attached databases are searched
-** for the table using the same algorithm used by the database engine to
-** resolve unqualified table references.
-**
-** ^The third and fourth parameters to this function are the table and column
-** name of the desired column, respectively.
-**
-** ^Metadata is returned by writing to the memory locations passed as the 5th
-** and subsequent parameters to this function. ^Any of these arguments may be
-** NULL, in which case the corresponding element of metadata is omitted.
-**
-** ^(
-**
-** | Parameter | Output
Type | Description
-**
-** |
|---|
| 5th | const char* | Data type
-** |
| 6th | const char* | Name of default collation sequence
-** |
| 7th | int | True if column has a NOT NULL constraint
-** |
| 8th | int | True if column is part of the PRIMARY KEY
-** |
| 9th | int | True if column is [AUTOINCREMENT]
-** |
-**
)^
-**
-** ^The memory pointed to by the character pointers returned for the
-** declaration type and collation sequence is valid until the next
-** call to any SQLite API function.
-**
-** ^If the specified table is actually a view, an [error code] is returned.
-**
-** ^If the specified column is "rowid", "oid" or "_rowid_" and the table
-** is not a [WITHOUT ROWID] table and an
-** [INTEGER PRIMARY KEY] column has been explicitly declared, then the output
-** parameters are set for the explicitly declared column. ^(If there is no
-** [INTEGER PRIMARY KEY] column, then the outputs
-** for the [rowid] are set as follows:
-**
-**
-** data type: "INTEGER"
-** collation sequence: "BINARY"
-** not null: 0
-** primary key: 1
-** auto increment: 0
-**
)^
-**
-** ^This function causes all database schemas to be read from disk and
-** parsed, if that has not already been done, and returns an error if
-** any errors are encountered while loading the schema.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_table_column_metadata(
- sqlite3 *db, /* Connection handle */
- const char *zDbName, /* Database name or NULL */
- const char *zTableName, /* Table name */
- const char *zColumnName, /* Column name */
- char const **pzDataType, /* OUTPUT: Declared data type */
- char const **pzCollSeq, /* OUTPUT: Collation sequence name */
- int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */
- int *pPrimaryKey, /* OUTPUT: True if column part of PK */
- int *pAutoinc /* OUTPUT: True if column is auto-increment */
-);
-
-/*
-** CAPI3REF: Load An Extension
-** METHOD: sqlite3
-**
-** ^This interface loads an SQLite extension library from the named file.
-**
-** ^The sqlite3_load_extension() interface attempts to load an
-** [SQLite extension] library contained in the file zFile. If
-** the file cannot be loaded directly, attempts are made to load
-** with various operating-system specific extensions added.
-** So for example, if "samplelib" cannot be loaded, then names like
-** "samplelib.so" or "samplelib.dylib" or "samplelib.dll" might
-** be tried also.
-**
-** ^The entry point is zProc.
-** ^(zProc may be 0, in which case SQLite will try to come up with an
-** entry point name on its own. It first tries "sqlite3_extension_init".
-** If that does not work, it constructs a name "sqlite3_X_init" where the
-** X is consists of the lower-case equivalent of all ASCII alphabetic
-** characters in the filename from the last "/" to the first following
-** "." and omitting any initial "lib".)^
-** ^The sqlite3_load_extension() interface returns
-** [SQLITE_OK] on success and [SQLITE_ERROR] if something goes wrong.
-** ^If an error occurs and pzErrMsg is not 0, then the
-** [sqlite3_load_extension()] interface shall attempt to
-** fill *pzErrMsg with error message text stored in memory
-** obtained from [sqlite3_malloc()]. The calling function
-** should free this memory by calling [sqlite3_free()].
-**
-** ^Extension loading must be enabled using
-** [sqlite3_enable_load_extension()] or
-** [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],1,NULL)
-** prior to calling this API,
-** otherwise an error will be returned.
-**
-** Security warning: It is recommended that the
-** [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method be used to enable only this
-** interface. The use of the [sqlite3_enable_load_extension()] interface
-** should be avoided. This will keep the SQL function [load_extension()]
-** disabled and prevent SQL injections from giving attackers
-** access to extension loading capabilities.
-**
-** See also the [load_extension() SQL function].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_load_extension(
- sqlite3 *db, /* Load the extension into this database connection */
- const char *zFile, /* Name of the shared library containing extension */
- const char *zProc, /* Entry point. Derived from zFile if 0 */
- char **pzErrMsg /* Put error message here if not 0 */
-);
-
-/*
-** CAPI3REF: Enable Or Disable Extension Loading
-** METHOD: sqlite3
-**
-** ^So as not to open security holes in older applications that are
-** unprepared to deal with [extension loading], and as a means of disabling
-** [extension loading] while evaluating user-entered SQL, the following API
-** is provided to turn the [sqlite3_load_extension()] mechanism on and off.
-**
-** ^Extension loading is off by default.
-** ^Call the sqlite3_enable_load_extension() routine with onoff==1
-** to turn extension loading on and call it with onoff==0 to turn
-** it back off again.
-**
-** ^This interface enables or disables both the C-API
-** [sqlite3_load_extension()] and the SQL function [load_extension()].
-** Use [sqlite3_db_config](db,[SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION],..)
-** to enable or disable only the C-API.
-**
-** Security warning: It is recommended that extension loading
-** be disabled using the [SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION] method
-** rather than this interface, so the [load_extension()] SQL function
-** remains disabled. This will prevent SQL injections from giving attackers
-** access to extension loading capabilities.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_enable_load_extension(sqlite3 *db, int onoff);
-
-/*
-** CAPI3REF: Automatically Load Statically Linked Extensions
-**
-** ^This interface causes the xEntryPoint() function to be invoked for
-** each new [database connection] that is created. The idea here is that
-** xEntryPoint() is the entry point for a statically linked [SQLite extension]
-** that is to be automatically loaded into all new database connections.
-**
-** ^(Even though the function prototype shows that xEntryPoint() takes
-** no arguments and returns void, SQLite invokes xEntryPoint() with three
-** arguments and expects and integer result as if the signature of the
-** entry point where as follows:
-**
-**
-** int xEntryPoint(
-** sqlite3 *db,
-** const char **pzErrMsg,
-** const struct sqlite3_api_routines *pThunk
-** );
-**
)^
-**
-** If the xEntryPoint routine encounters an error, it should make *pzErrMsg
-** point to an appropriate error message (obtained from [sqlite3_mprintf()])
-** and return an appropriate [error code]. ^SQLite ensures that *pzErrMsg
-** is NULL before calling the xEntryPoint(). ^SQLite will invoke
-** [sqlite3_free()] on *pzErrMsg after xEntryPoint() returns. ^If any
-** xEntryPoint() returns an error, the [sqlite3_open()], [sqlite3_open16()],
-** or [sqlite3_open_v2()] call that provoked the xEntryPoint() will fail.
-**
-** ^Calling sqlite3_auto_extension(X) with an entry point X that is already
-** on the list of automatic extensions is a harmless no-op. ^No entry point
-** will be called more than once for each database connection that is opened.
-**
-** See also: [sqlite3_reset_auto_extension()]
-** and [sqlite3_cancel_auto_extension()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_auto_extension(void (*xEntryPoint)(void));
-
-/*
-** CAPI3REF: Cancel Automatic Extension Loading
-**
-** ^The [sqlite3_cancel_auto_extension(X)] interface unregisters the
-** initialization routine X that was registered using a prior call to
-** [sqlite3_auto_extension(X)]. ^The [sqlite3_cancel_auto_extension(X)]
-** routine returns 1 if initialization routine X was successfully
-** unregistered and it returns 0 if X was not on the list of initialization
-** routines.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_cancel_auto_extension(void (*xEntryPoint)(void));
-
-/*
-** CAPI3REF: Reset Automatic Extension Loading
-**
-** ^This interface disables all automatic extensions previously
-** registered using [sqlite3_auto_extension()].
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_reset_auto_extension(void);
-
-/*
-** The interface to the virtual-table mechanism is currently considered
-** to be experimental. The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-*/
-
-/*
-** Structures used by the virtual table interface
-*/
-typedef struct sqlite3_vtab sqlite3_vtab;
-typedef struct sqlite3_index_info sqlite3_index_info;
-typedef struct sqlite3_vtab_cursor sqlite3_vtab_cursor;
-typedef struct sqlite3_module sqlite3_module;
-
-/*
-** CAPI3REF: Virtual Table Object
-** KEYWORDS: sqlite3_module {virtual table module}
-**
-** This structure, sometimes called a "virtual table module",
-** defines the implementation of a [virtual tables].
-** This structure consists mostly of methods for the module.
-**
-** ^A virtual table module is created by filling in a persistent
-** instance of this structure and passing a pointer to that instance
-** to [sqlite3_create_module()] or [sqlite3_create_module_v2()].
-** ^The registration remains valid until it is replaced by a different
-** module or until the [database connection] closes. The content
-** of this structure must not change while it is registered with
-** any database connection.
-*/
-struct sqlite3_module {
- int iVersion;
- int (*xCreate)(sqlite3*, void *pAux,
- int argc, const char *const*argv,
- sqlite3_vtab **ppVTab, char**);
- int (*xConnect)(sqlite3*, void *pAux,
- int argc, const char *const*argv,
- sqlite3_vtab **ppVTab, char**);
- int (*xBestIndex)(sqlite3_vtab *pVTab, sqlite3_index_info*);
- int (*xDisconnect)(sqlite3_vtab *pVTab);
- int (*xDestroy)(sqlite3_vtab *pVTab);
- int (*xOpen)(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor);
- int (*xClose)(sqlite3_vtab_cursor*);
- int (*xFilter)(sqlite3_vtab_cursor*, int idxNum, const char *idxStr,
- int argc, sqlite3_value **argv);
- int (*xNext)(sqlite3_vtab_cursor*);
- int (*xEof)(sqlite3_vtab_cursor*);
- int (*xColumn)(sqlite3_vtab_cursor*, sqlite3_context*, int);
- int (*xRowid)(sqlite3_vtab_cursor*, sqlite3_int64 *pRowid);
- int (*xUpdate)(sqlite3_vtab *, int, sqlite3_value **, sqlite3_int64 *);
- int (*xBegin)(sqlite3_vtab *pVTab);
- int (*xSync)(sqlite3_vtab *pVTab);
- int (*xCommit)(sqlite3_vtab *pVTab);
- int (*xRollback)(sqlite3_vtab *pVTab);
- int (*xFindFunction)(sqlite3_vtab *pVtab, int nArg, const char *zName,
- void (**pxFunc)(sqlite3_context*,int,sqlite3_value**),
- void **ppArg);
- int (*xRename)(sqlite3_vtab *pVtab, const char *zNew);
- /* The methods above are in version 1 of the sqlite_module object. Those
- ** below are for version 2 and greater. */
- int (*xSavepoint)(sqlite3_vtab *pVTab, int);
- int (*xRelease)(sqlite3_vtab *pVTab, int);
- int (*xRollbackTo)(sqlite3_vtab *pVTab, int);
-};
-
-/*
-** CAPI3REF: Virtual Table Indexing Information
-** KEYWORDS: sqlite3_index_info
-**
-** The sqlite3_index_info structure and its substructures is used as part
-** of the [virtual table] interface to
-** pass information into and receive the reply from the [xBestIndex]
-** method of a [virtual table module]. The fields under **Inputs** are the
-** inputs to xBestIndex and are read-only. xBestIndex inserts its
-** results into the **Outputs** fields.
-**
-** ^(The aConstraint[] array records WHERE clause constraints of the form:
-**
-** column OP expr
-**
-** where OP is =, <, <=, >, or >=.)^ ^(The particular operator is
-** stored in aConstraint[].op using one of the
-** [SQLITE_INDEX_CONSTRAINT_EQ | SQLITE_INDEX_CONSTRAINT_ values].)^
-** ^(The index of the column is stored in
-** aConstraint[].iColumn.)^ ^(aConstraint[].usable is TRUE if the
-** expr on the right-hand side can be evaluated (and thus the constraint
-** is usable) and false if it cannot.)^
-**
-** ^The optimizer automatically inverts terms of the form "expr OP column"
-** and makes other simplifications to the WHERE clause in an attempt to
-** get as many WHERE clause terms into the form shown above as possible.
-** ^The aConstraint[] array only reports WHERE clause terms that are
-** relevant to the particular virtual table being queried.
-**
-** ^Information about the ORDER BY clause is stored in aOrderBy[].
-** ^Each term of aOrderBy records a column of the ORDER BY clause.
-**
-** The colUsed field indicates which columns of the virtual table may be
-** required by the current scan. Virtual table columns are numbered from
-** zero in the order in which they appear within the CREATE TABLE statement
-** passed to sqlite3_declare_vtab(). For the first 63 columns (columns 0-62),
-** the corresponding bit is set within the colUsed mask if the column may be
-** required by SQLite. If the table has at least 64 columns and any column
-** to the right of the first 63 is required, then bit 63 of colUsed is also
-** set. In other words, column iCol may be required if the expression
-** (colUsed & ((sqlite3_uint64)1 << (iCol>=63 ? 63 : iCol))) evaluates to
-** non-zero.
-**
-** The [xBestIndex] method must fill aConstraintUsage[] with information
-** about what parameters to pass to xFilter. ^If argvIndex>0 then
-** the right-hand side of the corresponding aConstraint[] is evaluated
-** and becomes the argvIndex-th entry in argv. ^(If aConstraintUsage[].omit
-** is true, then the constraint is assumed to be fully handled by the
-** virtual table and is not checked again by SQLite.)^
-**
-** ^The idxNum and idxPtr values are recorded and passed into the
-** [xFilter] method.
-** ^[sqlite3_free()] is used to free idxPtr if and only if
-** needToFreeIdxPtr is true.
-**
-** ^The orderByConsumed means that output from [xFilter]/[xNext] will occur in
-** the correct order to satisfy the ORDER BY clause so that no separate
-** sorting step is required.
-**
-** ^The estimatedCost value is an estimate of the cost of a particular
-** strategy. A cost of N indicates that the cost of the strategy is similar
-** to a linear scan of an SQLite table with N rows. A cost of log(N)
-** indicates that the expense of the operation is similar to that of a
-** binary search on a unique indexed field of an SQLite table with N rows.
-**
-** ^The estimatedRows value is an estimate of the number of rows that
-** will be returned by the strategy.
-**
-** The xBestIndex method may optionally populate the idxFlags field with a
-** mask of SQLITE_INDEX_SCAN_* flags. Currently there is only one such flag -
-** SQLITE_INDEX_SCAN_UNIQUE. If the xBestIndex method sets this flag, SQLite
-** assumes that the strategy may visit at most one row.
-**
-** Additionally, if xBestIndex sets the SQLITE_INDEX_SCAN_UNIQUE flag, then
-** SQLite also assumes that if a call to the xUpdate() method is made as
-** part of the same statement to delete or update a virtual table row and the
-** implementation returns SQLITE_CONSTRAINT, then there is no need to rollback
-** any database changes. In other words, if the xUpdate() returns
-** SQLITE_CONSTRAINT, the database contents must be exactly as they were
-** before xUpdate was called. By contrast, if SQLITE_INDEX_SCAN_UNIQUE is not
-** set and xUpdate returns SQLITE_CONSTRAINT, any database changes made by
-** the xUpdate method are automatically rolled back by SQLite.
-**
-** IMPORTANT: The estimatedRows field was added to the sqlite3_index_info
-** structure for SQLite version 3.8.2. If a virtual table extension is
-** used with an SQLite version earlier than 3.8.2, the results of attempting
-** to read or write the estimatedRows field are undefined (but are likely
-** to included crashing the application). The estimatedRows field should
-** therefore only be used if [sqlite3_libversion_number()] returns a
-** value greater than or equal to 3008002. Similarly, the idxFlags field
-** was added for version 3.9.0. It may therefore only be used if
-** sqlite3_libversion_number() returns a value greater than or equal to
-** 3009000.
-*/
-struct sqlite3_index_info {
- /* Inputs */
- int nConstraint; /* Number of entries in aConstraint */
- struct sqlite3_index_constraint {
- int iColumn; /* Column constrained. -1 for ROWID */
- unsigned char op; /* Constraint operator */
- unsigned char usable; /* True if this constraint is usable */
- int iTermOffset; /* Used internally - xBestIndex should ignore */
- } *aConstraint; /* Table of WHERE clause constraints */
- int nOrderBy; /* Number of terms in the ORDER BY clause */
- struct sqlite3_index_orderby {
- int iColumn; /* Column number */
- unsigned char desc; /* True for DESC. False for ASC. */
- } *aOrderBy; /* The ORDER BY clause */
- /* Outputs */
- struct sqlite3_index_constraint_usage {
- int argvIndex; /* if >0, constraint is part of argv to xFilter */
- unsigned char omit; /* Do not code a test for this constraint */
- } *aConstraintUsage;
- int idxNum; /* Number used to identify the index */
- char *idxStr; /* String, possibly obtained from sqlite3_malloc */
- int needToFreeIdxStr; /* Free idxStr using sqlite3_free() if true */
- int orderByConsumed; /* True if output is already ordered */
- double estimatedCost; /* Estimated cost of using this index */
- /* Fields below are only available in SQLite 3.8.2 and later */
- sqlite3_int64 estimatedRows; /* Estimated number of rows returned */
- /* Fields below are only available in SQLite 3.9.0 and later */
- int idxFlags; /* Mask of SQLITE_INDEX_SCAN_* flags */
- /* Fields below are only available in SQLite 3.10.0 and later */
- sqlite3_uint64 colUsed; /* Input: Mask of columns used by statement */
-};
-
-/*
-** CAPI3REF: Virtual Table Scan Flags
-*/
-#define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */
-
-/*
-** CAPI3REF: Virtual Table Constraint Operator Codes
-**
-** These macros defined the allowed values for the
-** [sqlite3_index_info].aConstraint[].op field. Each value represents
-** an operator that is part of a constraint term in the wHERE clause of
-** a query that uses a [virtual table].
-*/
-#define SQLITE_INDEX_CONSTRAINT_EQ 2
-#define SQLITE_INDEX_CONSTRAINT_GT 4
-#define SQLITE_INDEX_CONSTRAINT_LE 8
-#define SQLITE_INDEX_CONSTRAINT_LT 16
-#define SQLITE_INDEX_CONSTRAINT_GE 32
-#define SQLITE_INDEX_CONSTRAINT_MATCH 64
-#define SQLITE_INDEX_CONSTRAINT_LIKE 65
-#define SQLITE_INDEX_CONSTRAINT_GLOB 66
-#define SQLITE_INDEX_CONSTRAINT_REGEXP 67
-
-/*
-** CAPI3REF: Register A Virtual Table Implementation
-** METHOD: sqlite3
-**
-** ^These routines are used to register a new [virtual table module] name.
-** ^Module names must be registered before
-** creating a new [virtual table] using the module and before using a
-** preexisting [virtual table] for the module.
-**
-** ^The module name is registered on the [database connection] specified
-** by the first parameter. ^The name of the module is given by the
-** second parameter. ^The third parameter is a pointer to
-** the implementation of the [virtual table module]. ^The fourth
-** parameter is an arbitrary client data pointer that is passed through
-** into the [xCreate] and [xConnect] methods of the virtual table module
-** when a new virtual table is be being created or reinitialized.
-**
-** ^The sqlite3_create_module_v2() interface has a fifth parameter which
-** is a pointer to a destructor for the pClientData. ^SQLite will
-** invoke the destructor function (if it is not NULL) when SQLite
-** no longer needs the pClientData pointer. ^The destructor will also
-** be invoked if the call to sqlite3_create_module_v2() fails.
-** ^The sqlite3_create_module()
-** interface is equivalent to sqlite3_create_module_v2() with a NULL
-** destructor.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module(
- sqlite3 *db, /* SQLite connection to register module with */
- const char *zName, /* Name of the module */
- const sqlite3_module *p, /* Methods for the module */
- void *pClientData /* Client data for xCreate/xConnect */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_create_module_v2(
- sqlite3 *db, /* SQLite connection to register module with */
- const char *zName, /* Name of the module */
- const sqlite3_module *p, /* Methods for the module */
- void *pClientData, /* Client data for xCreate/xConnect */
- void(*xDestroy)(void*) /* Module destructor function */
-);
-
-/*
-** CAPI3REF: Virtual Table Instance Object
-** KEYWORDS: sqlite3_vtab
-**
-** Every [virtual table module] implementation uses a subclass
-** of this object to describe a particular instance
-** of the [virtual table]. Each subclass will
-** be tailored to the specific needs of the module implementation.
-** The purpose of this superclass is to define certain fields that are
-** common to all module implementations.
-**
-** ^Virtual tables methods can set an error message by assigning a
-** string obtained from [sqlite3_mprintf()] to zErrMsg. The method should
-** take care that any prior string is freed by a call to [sqlite3_free()]
-** prior to assigning a new string to zErrMsg. ^After the error message
-** is delivered up to the client application, the string will be automatically
-** freed by sqlite3_free() and the zErrMsg field will be zeroed.
-*/
-struct sqlite3_vtab {
- const sqlite3_module *pModule; /* The module for this virtual table */
- int nRef; /* Number of open cursors */
- char *zErrMsg; /* Error message from sqlite3_mprintf() */
- /* Virtual table implementations will typically add additional fields */
-};
-
-/*
-** CAPI3REF: Virtual Table Cursor Object
-** KEYWORDS: sqlite3_vtab_cursor {virtual table cursor}
-**
-** Every [virtual table module] implementation uses a subclass of the
-** following structure to describe cursors that point into the
-** [virtual table] and are used
-** to loop through the virtual table. Cursors are created using the
-** [sqlite3_module.xOpen | xOpen] method of the module and are destroyed
-** by the [sqlite3_module.xClose | xClose] method. Cursors are used
-** by the [xFilter], [xNext], [xEof], [xColumn], and [xRowid] methods
-** of the module. Each module implementation will define
-** the content of a cursor structure to suit its own needs.
-**
-** This superclass exists in order to define fields of the cursor that
-** are common to all implementations.
-*/
-struct sqlite3_vtab_cursor {
- sqlite3_vtab *pVtab; /* Virtual table of this cursor */
- /* Virtual table implementations will typically add additional fields */
-};
-
-/*
-** CAPI3REF: Declare The Schema Of A Virtual Table
-**
-** ^The [xCreate] and [xConnect] methods of a
-** [virtual table module] call this interface
-** to declare the format (the names and datatypes of the columns) of
-** the virtual tables they implement.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_declare_vtab(sqlite3*, const char *zSQL);
-
-/*
-** CAPI3REF: Overload A Function For A Virtual Table
-** METHOD: sqlite3
-**
-** ^(Virtual tables can provide alternative implementations of functions
-** using the [xFindFunction] method of the [virtual table module].
-** But global versions of those functions
-** must exist in order to be overloaded.)^
-**
-** ^(This API makes sure a global version of a function with a particular
-** name and number of parameters exists. If no such function exists
-** before this API is called, a new function is created.)^ ^The implementation
-** of the new function always causes an exception to be thrown. So
-** the new function is not good for anything by itself. Its only
-** purpose is to be a placeholder function that can be overloaded
-** by a [virtual table].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_overload_function(sqlite3*, const char *zFuncName, int nArg);
-
-/*
-** The interface to the virtual-table mechanism defined above (back up
-** to a comment remarkably similar to this one) is currently considered
-** to be experimental. The interface might change in incompatible ways.
-** If this is a problem for you, do not use the interface at this time.
-**
-** When the virtual-table mechanism stabilizes, we will declare the
-** interface fixed, support it indefinitely, and remove this comment.
-*/
-
-/*
-** CAPI3REF: A Handle To An Open BLOB
-** KEYWORDS: {BLOB handle} {BLOB handles}
-**
-** An instance of this object represents an open BLOB on which
-** [sqlite3_blob_open | incremental BLOB I/O] can be performed.
-** ^Objects of this type are created by [sqlite3_blob_open()]
-** and destroyed by [sqlite3_blob_close()].
-** ^The [sqlite3_blob_read()] and [sqlite3_blob_write()] interfaces
-** can be used to read or write small subsections of the BLOB.
-** ^The [sqlite3_blob_bytes()] interface returns the size of the BLOB in bytes.
-*/
-typedef struct sqlite3_blob sqlite3_blob;
-
-/*
-** CAPI3REF: Open A BLOB For Incremental I/O
-** METHOD: sqlite3
-** CONSTRUCTOR: sqlite3_blob
-**
-** ^(This interfaces opens a [BLOB handle | handle] to the BLOB located
-** in row iRow, column zColumn, table zTable in database zDb;
-** in other words, the same BLOB that would be selected by:
-**
-**
-** SELECT zColumn FROM zDb.zTable WHERE [rowid] = iRow;
-**
)^
-**
-** ^(Parameter zDb is not the filename that contains the database, but
-** rather the symbolic name of the database. For attached databases, this is
-** the name that appears after the AS keyword in the [ATTACH] statement.
-** For the main database file, the database name is "main". For TEMP
-** tables, the database name is "temp".)^
-**
-** ^If the flags parameter is non-zero, then the BLOB is opened for read
-** and write access. ^If the flags parameter is zero, the BLOB is opened for
-** read-only access.
-**
-** ^(On success, [SQLITE_OK] is returned and the new [BLOB handle] is stored
-** in *ppBlob. Otherwise an [error code] is returned and, unless the error
-** code is SQLITE_MISUSE, *ppBlob is set to NULL.)^ ^This means that, provided
-** the API is not misused, it is always safe to call [sqlite3_blob_close()]
-** on *ppBlob after this function it returns.
-**
-** This function fails with SQLITE_ERROR if any of the following are true:
-**
-** - ^(Database zDb does not exist)^,
-**
- ^(Table zTable does not exist within database zDb)^,
-**
- ^(Table zTable is a WITHOUT ROWID table)^,
-**
- ^(Column zColumn does not exist)^,
-**
- ^(Row iRow is not present in the table)^,
-**
- ^(The specified column of row iRow contains a value that is not
-** a TEXT or BLOB value)^,
-**
- ^(Column zColumn is part of an index, PRIMARY KEY or UNIQUE
-** constraint and the blob is being opened for read/write access)^,
-**
- ^([foreign key constraints | Foreign key constraints] are enabled,
-** column zColumn is part of a [child key] definition and the blob is
-** being opened for read/write access)^.
-**
-**
-** ^Unless it returns SQLITE_MISUSE, this function sets the
-** [database connection] error code and message accessible via
-** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
-**
-**
-** ^(If the row that a BLOB handle points to is modified by an
-** [UPDATE], [DELETE], or by [ON CONFLICT] side-effects
-** then the BLOB handle is marked as "expired".
-** This is true if any column of the row is changed, even a column
-** other than the one the BLOB handle is open on.)^
-** ^Calls to [sqlite3_blob_read()] and [sqlite3_blob_write()] for
-** an expired BLOB handle fail with a return code of [SQLITE_ABORT].
-** ^(Changes written into a BLOB prior to the BLOB expiring are not
-** rolled back by the expiration of the BLOB. Such changes will eventually
-** commit if the transaction continues to completion.)^
-**
-** ^Use the [sqlite3_blob_bytes()] interface to determine the size of
-** the opened blob. ^The size of a blob may not be changed by this
-** interface. Use the [UPDATE] SQL command to change the size of a
-** blob.
-**
-** ^The [sqlite3_bind_zeroblob()] and [sqlite3_result_zeroblob()] interfaces
-** and the built-in [zeroblob] SQL function may be used to create a
-** zero-filled blob to read or write using the incremental-blob interface.
-**
-** To avoid a resource leak, every open [BLOB handle] should eventually
-** be released by a call to [sqlite3_blob_close()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_open(
- sqlite3*,
- const char *zDb,
- const char *zTable,
- const char *zColumn,
- sqlite3_int64 iRow,
- int flags,
- sqlite3_blob **ppBlob
-);
-
-/*
-** CAPI3REF: Move a BLOB Handle to a New Row
-** METHOD: sqlite3_blob
-**
-** ^This function is used to move an existing blob handle so that it points
-** to a different row of the same database table. ^The new row is identified
-** by the rowid value passed as the second argument. Only the row can be
-** changed. ^The database, table and column on which the blob handle is open
-** remain the same. Moving an existing blob handle to a new row can be
-** faster than closing the existing handle and opening a new one.
-**
-** ^(The new row must meet the same criteria as for [sqlite3_blob_open()] -
-** it must exist and there must be either a blob or text value stored in
-** the nominated column.)^ ^If the new row is not present in the table, or if
-** it does not contain a blob or text value, or if another error occurs, an
-** SQLite error code is returned and the blob handle is considered aborted.
-** ^All subsequent calls to [sqlite3_blob_read()], [sqlite3_blob_write()] or
-** [sqlite3_blob_reopen()] on an aborted blob handle immediately return
-** SQLITE_ABORT. ^Calling [sqlite3_blob_bytes()] on an aborted blob handle
-** always returns zero.
-**
-** ^This function sets the database handle error code and message.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_reopen(sqlite3_blob *, sqlite3_int64);
-
-/*
-** CAPI3REF: Close A BLOB Handle
-** DESTRUCTOR: sqlite3_blob
-**
-** ^This function closes an open [BLOB handle]. ^(The BLOB handle is closed
-** unconditionally. Even if this routine returns an error code, the
-** handle is still closed.)^
-**
-** ^If the blob handle being closed was opened for read-write access, and if
-** the database is in auto-commit mode and there are no other open read-write
-** blob handles or active write statements, the current transaction is
-** committed. ^If an error occurs while committing the transaction, an error
-** code is returned and the transaction rolled back.
-**
-** Calling this function with an argument that is not a NULL pointer or an
-** open blob handle results in undefined behaviour. ^Calling this routine
-** with a null pointer (such as would be returned by a failed call to
-** [sqlite3_blob_open()]) is a harmless no-op. ^Otherwise, if this function
-** is passed a valid open blob handle, the values returned by the
-** sqlite3_errcode() and sqlite3_errmsg() functions are set before returning.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_close(sqlite3_blob *);
-
-/*
-** CAPI3REF: Return The Size Of An Open BLOB
-** METHOD: sqlite3_blob
-**
-** ^Returns the size in bytes of the BLOB accessible via the
-** successfully opened [BLOB handle] in its only argument. ^The
-** incremental blob I/O routines can only read or overwriting existing
-** blob content; they cannot change the size of a blob.
-**
-** This routine only works on a [BLOB handle] which has been created
-** by a prior successful call to [sqlite3_blob_open()] and which has not
-** been closed by [sqlite3_blob_close()]. Passing any other pointer in
-** to this routine results in undefined and probably undesirable behavior.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_bytes(sqlite3_blob *);
-
-/*
-** CAPI3REF: Read Data From A BLOB Incrementally
-** METHOD: sqlite3_blob
-**
-** ^(This function is used to read data from an open [BLOB handle] into a
-** caller-supplied buffer. N bytes of data are copied into buffer Z
-** from the open BLOB, starting at offset iOffset.)^
-**
-** ^If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is read. ^If N or iOffset is
-** less than zero, [SQLITE_ERROR] is returned and no data is read.
-** ^The size of the blob (and hence the maximum value of N+iOffset)
-** can be determined using the [sqlite3_blob_bytes()] interface.
-**
-** ^An attempt to read from an expired [BLOB handle] fails with an
-** error code of [SQLITE_ABORT].
-**
-** ^(On success, sqlite3_blob_read() returns SQLITE_OK.
-** Otherwise, an [error code] or an [extended error code] is returned.)^
-**
-** This routine only works on a [BLOB handle] which has been created
-** by a prior successful call to [sqlite3_blob_open()] and which has not
-** been closed by [sqlite3_blob_close()]. Passing any other pointer in
-** to this routine results in undefined and probably undesirable behavior.
-**
-** See also: [sqlite3_blob_write()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_read(sqlite3_blob *, void *Z, int N, int iOffset);
-
-/*
-** CAPI3REF: Write Data Into A BLOB Incrementally
-** METHOD: sqlite3_blob
-**
-** ^(This function is used to write data into an open [BLOB handle] from a
-** caller-supplied buffer. N bytes of data are copied from the buffer Z
-** into the open BLOB, starting at offset iOffset.)^
-**
-** ^(On success, sqlite3_blob_write() returns SQLITE_OK.
-** Otherwise, an [error code] or an [extended error code] is returned.)^
-** ^Unless SQLITE_MISUSE is returned, this function sets the
-** [database connection] error code and message accessible via
-** [sqlite3_errcode()] and [sqlite3_errmsg()] and related functions.
-**
-** ^If the [BLOB handle] passed as the first argument was not opened for
-** writing (the flags parameter to [sqlite3_blob_open()] was zero),
-** this function returns [SQLITE_READONLY].
-**
-** This function may only modify the contents of the BLOB; it is
-** not possible to increase the size of a BLOB using this API.
-** ^If offset iOffset is less than N bytes from the end of the BLOB,
-** [SQLITE_ERROR] is returned and no data is written. The size of the
-** BLOB (and hence the maximum value of N+iOffset) can be determined
-** using the [sqlite3_blob_bytes()] interface. ^If N or iOffset are less
-** than zero [SQLITE_ERROR] is returned and no data is written.
-**
-** ^An attempt to write to an expired [BLOB handle] fails with an
-** error code of [SQLITE_ABORT]. ^Writes to the BLOB that occurred
-** before the [BLOB handle] expired are not rolled back by the
-** expiration of the handle, though of course those changes might
-** have been overwritten by the statement that expired the BLOB handle
-** or by other independent statements.
-**
-** This routine only works on a [BLOB handle] which has been created
-** by a prior successful call to [sqlite3_blob_open()] and which has not
-** been closed by [sqlite3_blob_close()]. Passing any other pointer in
-** to this routine results in undefined and probably undesirable behavior.
-**
-** See also: [sqlite3_blob_read()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_blob_write(sqlite3_blob *, const void *z, int n, int iOffset);
-
-/*
-** CAPI3REF: Virtual File System Objects
-**
-** A virtual filesystem (VFS) is an [sqlite3_vfs] object
-** that SQLite uses to interact
-** with the underlying operating system. Most SQLite builds come with a
-** single default VFS that is appropriate for the host computer.
-** New VFSes can be registered and existing VFSes can be unregistered.
-** The following interfaces are provided.
-**
-** ^The sqlite3_vfs_find() interface returns a pointer to a VFS given its name.
-** ^Names are case sensitive.
-** ^Names are zero-terminated UTF-8 strings.
-** ^If there is no match, a NULL pointer is returned.
-** ^If zVfsName is NULL then the default VFS is returned.
-**
-** ^New VFSes are registered with sqlite3_vfs_register().
-** ^Each new VFS becomes the default VFS if the makeDflt flag is set.
-** ^The same VFS can be registered multiple times without injury.
-** ^To make an existing VFS into the default VFS, register it again
-** with the makeDflt flag set. If two different VFSes with the
-** same name are registered, the behavior is undefined. If a
-** VFS is registered with a name that is NULL or an empty string,
-** then the behavior is undefined.
-**
-** ^Unregister a VFS with the sqlite3_vfs_unregister() interface.
-** ^(If the default VFS is unregistered, another VFS is chosen as
-** the default. The choice for the new VFS is arbitrary.)^
-*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfsName);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs*, int makeDflt);
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs*);
-
-/*
-** CAPI3REF: Mutexes
-**
-** The SQLite core uses these routines for thread
-** synchronization. Though they are intended for internal
-** use by SQLite, code that links against SQLite is
-** permitted to use any of these routines.
-**
-** The SQLite source code contains multiple implementations
-** of these mutex routines. An appropriate implementation
-** is selected automatically at compile-time. The following
-** implementations are available in the SQLite core:
-**
-**
-** - SQLITE_MUTEX_PTHREADS
-**
- SQLITE_MUTEX_W32
-**
- SQLITE_MUTEX_NOOP
-**
-**
-** The SQLITE_MUTEX_NOOP implementation is a set of routines
-** that does no real locking and is appropriate for use in
-** a single-threaded application. The SQLITE_MUTEX_PTHREADS and
-** SQLITE_MUTEX_W32 implementations are appropriate for use on Unix
-** and Windows.
-**
-** If SQLite is compiled with the SQLITE_MUTEX_APPDEF preprocessor
-** macro defined (with "-DSQLITE_MUTEX_APPDEF=1"), then no mutex
-** implementation is included with the library. In this case the
-** application must supply a custom mutex implementation using the
-** [SQLITE_CONFIG_MUTEX] option of the sqlite3_config() function
-** before calling sqlite3_initialize() or any other public sqlite3_
-** function that calls sqlite3_initialize().
-**
-** ^The sqlite3_mutex_alloc() routine allocates a new
-** mutex and returns a pointer to it. ^The sqlite3_mutex_alloc()
-** routine returns NULL if it is unable to allocate the requested
-** mutex. The argument to sqlite3_mutex_alloc() must one of these
-** integer constants:
-**
-**
-** - SQLITE_MUTEX_FAST
-**
- SQLITE_MUTEX_RECURSIVE
-**
- SQLITE_MUTEX_STATIC_MASTER
-**
- SQLITE_MUTEX_STATIC_MEM
-**
- SQLITE_MUTEX_STATIC_OPEN
-**
- SQLITE_MUTEX_STATIC_PRNG
-**
- SQLITE_MUTEX_STATIC_LRU
-**
- SQLITE_MUTEX_STATIC_PMEM
-**
- SQLITE_MUTEX_STATIC_APP1
-**
- SQLITE_MUTEX_STATIC_APP2
-**
- SQLITE_MUTEX_STATIC_APP3
-**
- SQLITE_MUTEX_STATIC_VFS1
-**
- SQLITE_MUTEX_STATIC_VFS2
-**
- SQLITE_MUTEX_STATIC_VFS3
-**
-**
-** ^The first two constants (SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE)
-** cause sqlite3_mutex_alloc() to create
-** a new mutex. ^The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
-** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
-** The mutex implementation does not need to make a distinction
-** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
-** not want to. SQLite will only request a recursive mutex in
-** cases where it really needs one. If a faster non-recursive mutex
-** implementation is available on the host platform, the mutex subsystem
-** might return such a mutex in response to SQLITE_MUTEX_FAST.
-**
-** ^The other allowed parameters to sqlite3_mutex_alloc() (anything other
-** than SQLITE_MUTEX_FAST and SQLITE_MUTEX_RECURSIVE) each return
-** a pointer to a static preexisting mutex. ^Nine static mutexes are
-** used by the current version of SQLite. Future versions of SQLite
-** may add additional static mutexes. Static mutexes are for internal
-** use by SQLite only. Applications that use SQLite mutexes should
-** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
-** SQLITE_MUTEX_RECURSIVE.
-**
-** ^Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
-** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call. ^For the static
-** mutex types, the same mutex is returned on every call that has
-** the same type number.
-**
-** ^The sqlite3_mutex_free() routine deallocates a previously
-** allocated dynamic mutex. Attempting to deallocate a static
-** mutex results in undefined behavior.
-**
-** ^The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. ^If another thread is already within the mutex,
-** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. ^The sqlite3_mutex_try() interface returns [SQLITE_OK]
-** upon successful entry. ^(Mutexes created using
-** SQLITE_MUTEX_RECURSIVE can be entered multiple times by the same thread.
-** In such cases, the
-** mutex must be exited an equal number of times before another thread
-** can enter.)^ If the same thread tries to enter any mutex other
-** than an SQLITE_MUTEX_RECURSIVE more than once, the behavior is undefined.
-**
-** ^(Some systems (for example, Windows 95) do not support the operation
-** implemented by sqlite3_mutex_try(). On those systems, sqlite3_mutex_try()
-** will always return SQLITE_BUSY. The SQLite core only ever uses
-** sqlite3_mutex_try() as an optimization so this is acceptable
-** behavior.)^
-**
-** ^The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. The behavior
-** is undefined if the mutex is not currently entered by the
-** calling thread or is not currently allocated.
-**
-** ^If the argument to sqlite3_mutex_enter(), sqlite3_mutex_try(), or
-** sqlite3_mutex_leave() is a NULL pointer, then all three routines
-** behave as no-ops.
-**
-** See also: [sqlite3_mutex_held()] and [sqlite3_mutex_notheld()].
-*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex*);
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex*);
-
-/*
-** CAPI3REF: Mutex Methods Object
-**
-** An instance of this structure defines the low-level routines
-** used to allocate and use mutexes.
-**
-** Usually, the default mutex implementations provided by SQLite are
-** sufficient, however the application has the option of substituting a custom
-** implementation for specialized deployments or systems for which SQLite
-** does not provide a suitable implementation. In this case, the application
-** creates and populates an instance of this structure to pass
-** to sqlite3_config() along with the [SQLITE_CONFIG_MUTEX] option.
-** Additionally, an instance of this structure can be used as an
-** output variable when querying the system for the current mutex
-** implementation, using the [SQLITE_CONFIG_GETMUTEX] option.
-**
-** ^The xMutexInit method defined by this structure is invoked as
-** part of system initialization by the sqlite3_initialize() function.
-** ^The xMutexInit routine is called by SQLite exactly once for each
-** effective call to [sqlite3_initialize()].
-**
-** ^The xMutexEnd method defined by this structure is invoked as
-** part of system shutdown by the sqlite3_shutdown() function. The
-** implementation of this method is expected to release all outstanding
-** resources obtained by the mutex methods implementation, especially
-** those obtained by the xMutexInit method. ^The xMutexEnd()
-** interface is invoked exactly once for each call to [sqlite3_shutdown()].
-**
-** ^(The remaining seven methods defined by this structure (xMutexAlloc,
-** xMutexFree, xMutexEnter, xMutexTry, xMutexLeave, xMutexHeld and
-** xMutexNotheld) implement the following interfaces (respectively):
-**
-**
-** - [sqlite3_mutex_alloc()]
-** - [sqlite3_mutex_free()]
-** - [sqlite3_mutex_enter()]
-** - [sqlite3_mutex_try()]
-** - [sqlite3_mutex_leave()]
-** - [sqlite3_mutex_held()]
-** - [sqlite3_mutex_notheld()]
-**
)^
-**
-** The only difference is that the public sqlite3_XXX functions enumerated
-** above silently ignore any invocations that pass a NULL pointer instead
-** of a valid mutex handle. The implementations of the methods defined
-** by this structure are not required to handle this case, the results
-** of passing a NULL pointer instead of a valid mutex handle are undefined
-** (i.e. it is acceptable to provide an implementation that segfaults if
-** it is passed a NULL pointer).
-**
-** The xMutexInit() method must be threadsafe. It must be harmless to
-** invoke xMutexInit() multiple times within the same process and without
-** intervening calls to xMutexEnd(). Second and subsequent calls to
-** xMutexInit() must be no-ops.
-**
-** xMutexInit() must not use SQLite memory allocation ([sqlite3_malloc()]
-** and its associates). Similarly, xMutexAlloc() must not use SQLite memory
-** allocation for a static mutex. ^However xMutexAlloc() may use SQLite
-** memory allocation for a fast or recursive mutex.
-**
-** ^SQLite will invoke the xMutexEnd() method when [sqlite3_shutdown()] is
-** called, but only if the prior call to xMutexInit returned SQLITE_OK.
-** If xMutexInit fails in any way, it is expected to clean up after itself
-** prior to returning.
-*/
-typedef struct sqlite3_mutex_methods sqlite3_mutex_methods;
-struct sqlite3_mutex_methods {
- int (*xMutexInit)(void);
- int (*xMutexEnd)(void);
- sqlite3_mutex *(*xMutexAlloc)(int);
- void (*xMutexFree)(sqlite3_mutex *);
- void (*xMutexEnter)(sqlite3_mutex *);
- int (*xMutexTry)(sqlite3_mutex *);
- void (*xMutexLeave)(sqlite3_mutex *);
- int (*xMutexHeld)(sqlite3_mutex *);
- int (*xMutexNotheld)(sqlite3_mutex *);
-};
-
-/*
-** CAPI3REF: Mutex Verification Routines
-**
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routines
-** are intended for use inside assert() statements. The SQLite core
-** never uses these routines except inside an assert() and applications
-** are advised to follow the lead of the core. The SQLite core only
-** provides implementations for these routines when it is compiled
-** with the SQLITE_DEBUG flag. External mutex implementations
-** are only required to provide these routines if SQLITE_DEBUG is
-** defined and if NDEBUG is not defined.
-**
-** These routines should return true if the mutex in their argument
-** is held or not held, respectively, by the calling thread.
-**
-** The implementation is not required to provide versions of these
-** routines that actually work. If the implementation does not provide working
-** versions of these routines, it should at least provide stubs that always
-** return true so that one does not get spurious assertion failures.
-**
-** If the argument to sqlite3_mutex_held() is a NULL pointer then
-** the routine should return 1. This seems counter-intuitive since
-** clearly the mutex cannot be held if it does not exist. But
-** the reason the mutex does not exist is because the build is not
-** using mutexes. And we do not want the assert() containing the
-** call to sqlite3_mutex_held() to fail, so a non-zero return is
-** the appropriate thing to do. The sqlite3_mutex_notheld()
-** interface should also return 1 when given a NULL pointer.
-*/
-#ifndef NDEBUG
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex*);
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex*);
-#endif
-
-/*
-** CAPI3REF: Mutex Types
-**
-** The [sqlite3_mutex_alloc()] interface takes a single argument
-** which is one of these integer constants.
-**
-** The set of static mutexes may change from one SQLite release to the
-** next. Applications that override the built-in mutex logic must be
-** prepared to accommodate additional static mutexes.
-*/
-#define SQLITE_MUTEX_FAST 0
-#define SQLITE_MUTEX_RECURSIVE 1
-#define SQLITE_MUTEX_STATIC_MASTER 2
-#define SQLITE_MUTEX_STATIC_MEM 3 /* sqlite3_malloc() */
-#define SQLITE_MUTEX_STATIC_MEM2 4 /* NOT USED */
-#define SQLITE_MUTEX_STATIC_OPEN 4 /* sqlite3BtreeOpen() */
-#define SQLITE_MUTEX_STATIC_PRNG 5 /* sqlite3_random() */
-#define SQLITE_MUTEX_STATIC_LRU 6 /* lru page list */
-#define SQLITE_MUTEX_STATIC_LRU2 7 /* NOT USED */
-#define SQLITE_MUTEX_STATIC_PMEM 7 /* sqlite3PageMalloc() */
-#define SQLITE_MUTEX_STATIC_APP1 8 /* For use by application */
-#define SQLITE_MUTEX_STATIC_APP2 9 /* For use by application */
-#define SQLITE_MUTEX_STATIC_APP3 10 /* For use by application */
-#define SQLITE_MUTEX_STATIC_VFS1 11 /* For use by built-in VFS */
-#define SQLITE_MUTEX_STATIC_VFS2 12 /* For use by extension VFS */
-#define SQLITE_MUTEX_STATIC_VFS3 13 /* For use by application VFS */
-
-/*
-** CAPI3REF: Retrieve the mutex for a database connection
-** METHOD: sqlite3
-**
-** ^This interface returns a pointer the [sqlite3_mutex] object that
-** serializes access to the [database connection] given in the argument
-** when the [threading mode] is Serialized.
-** ^If the [threading mode] is Single-thread or Multi-thread then this
-** routine returns a NULL pointer.
-*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_db_mutex(sqlite3*);
-
-/*
-** CAPI3REF: Low-Level Control Of Database Files
-** METHOD: sqlite3
-**
-** ^The [sqlite3_file_control()] interface makes a direct call to the
-** xFileControl method for the [sqlite3_io_methods] object associated
-** with a particular database identified by the second argument. ^The
-** name of the database is "main" for the main database or "temp" for the
-** TEMP database, or the name that appears after the AS keyword for
-** databases that are added using the [ATTACH] SQL command.
-** ^A NULL pointer can be used in place of "main" to refer to the
-** main database file.
-** ^The third and fourth parameters to this routine
-** are passed directly through to the second and third parameters of
-** the xFileControl method. ^The return value of the xFileControl
-** method becomes the return value of this routine.
-**
-** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes
-** a pointer to the underlying [sqlite3_file] object to be written into
-** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER
-** case is a short-circuit path which does not actually invoke the
-** underlying sqlite3_io_methods.xFileControl method.
-**
-** ^If the second parameter (zDbName) does not match the name of any
-** open database file, then SQLITE_ERROR is returned. ^This error
-** code is not remembered and will not be recalled by [sqlite3_errcode()]
-** or [sqlite3_errmsg()]. The underlying xFileControl method might
-** also return SQLITE_ERROR. There is no way to distinguish between
-** an incorrect zDbName and an SQLITE_ERROR return from the underlying
-** xFileControl method.
-**
-** See also: [SQLITE_FCNTL_LOCKSTATE]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*);
-
-/*
-** CAPI3REF: Testing Interface
-**
-** ^The sqlite3_test_control() interface is used to read out internal
-** state of SQLite and to inject faults into SQLite for testing
-** purposes. ^The first parameter is an operation code that determines
-** the number, meaning, and operation of all subsequent parameters.
-**
-** This interface is not for use by applications. It exists solely
-** for verifying the correct operation of the SQLite library. Depending
-** on how the SQLite library is compiled, this interface might not exist.
-**
-** The details of the operation codes, their meanings, the parameters
-** they take, and what they do are all subject to change without notice.
-** Unlike most of the SQLite API, this function is not guaranteed to
-** operate consistently from one release to the next.
-*/
-SQLITE_API int SQLITE_CDECL sqlite3_test_control(int op, ...);
-
-/*
-** CAPI3REF: Testing Interface Operation Codes
-**
-** These constants are the valid operation code parameters used
-** as the first argument to [sqlite3_test_control()].
-**
-** These parameters and their meanings are subject to change
-** without notice. These values are for testing purposes only.
-** Applications should not use any of these parameters or the
-** [sqlite3_test_control()] interface.
-*/
-#define SQLITE_TESTCTRL_FIRST 5
-#define SQLITE_TESTCTRL_PRNG_SAVE 5
-#define SQLITE_TESTCTRL_PRNG_RESTORE 6
-#define SQLITE_TESTCTRL_PRNG_RESET 7
-#define SQLITE_TESTCTRL_BITVEC_TEST 8
-#define SQLITE_TESTCTRL_FAULT_INSTALL 9
-#define SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS 10
-#define SQLITE_TESTCTRL_PENDING_BYTE 11
-#define SQLITE_TESTCTRL_ASSERT 12
-#define SQLITE_TESTCTRL_ALWAYS 13
-#define SQLITE_TESTCTRL_RESERVE 14
-#define SQLITE_TESTCTRL_OPTIMIZATIONS 15
-#define SQLITE_TESTCTRL_ISKEYWORD 16
-#define SQLITE_TESTCTRL_SCRATCHMALLOC 17
-#define SQLITE_TESTCTRL_LOCALTIME_FAULT 18
-#define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */
-#define SQLITE_TESTCTRL_NEVER_CORRUPT 20
-#define SQLITE_TESTCTRL_VDBE_COVERAGE 21
-#define SQLITE_TESTCTRL_BYTEORDER 22
-#define SQLITE_TESTCTRL_ISINIT 23
-#define SQLITE_TESTCTRL_SORTER_MMAP 24
-#define SQLITE_TESTCTRL_IMPOSTER 25
-#define SQLITE_TESTCTRL_LAST 25
-
-/*
-** CAPI3REF: SQLite Runtime Status
-**
-** ^These interfaces are used to retrieve runtime status information
-** about the performance of SQLite, and optionally to reset various
-** highwater marks. ^The first argument is an integer code for
-** the specific parameter to measure. ^(Recognized integer codes
-** are of the form [status parameters | SQLITE_STATUS_...].)^
-** ^The current value of the parameter is returned into *pCurrent.
-** ^The highest recorded value is returned in *pHighwater. ^If the
-** resetFlag is true, then the highest record value is reset after
-** *pHighwater is written. ^(Some parameters do not record the highest
-** value. For those parameters
-** nothing is written into *pHighwater and the resetFlag is ignored.)^
-** ^(Other parameters record only the highwater mark and not the current
-** value. For these latter parameters nothing is written into *pCurrent.)^
-**
-** ^The sqlite3_status() and sqlite3_status64() routines return
-** SQLITE_OK on success and a non-zero [error code] on failure.
-**
-** If either the current value or the highwater mark is too large to
-** be represented by a 32-bit integer, then the values returned by
-** sqlite3_status() are undefined.
-**
-** See also: [sqlite3_db_status()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag);
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
- int op,
- sqlite3_int64 *pCurrent,
- sqlite3_int64 *pHighwater,
- int resetFlag
-);
-
-
-/*
-** CAPI3REF: Status Parameters
-** KEYWORDS: {status parameters}
-**
-** These integer constants designate various run-time status parameters
-** that can be returned by [sqlite3_status()].
-**
-**
-** [[SQLITE_STATUS_MEMORY_USED]] ^(- SQLITE_STATUS_MEMORY_USED
-** - This parameter is the current amount of memory checked out
-** using [sqlite3_malloc()], either directly or indirectly. The
-** figure includes calls made to [sqlite3_malloc()] by the application
-** and internal memory usage by the SQLite library. Scratch memory
-** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache
-** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in
-** this parameter. The amount returned is the sum of the allocation
-** sizes as reported by the xSize method in [sqlite3_mem_methods].
)^
-**
-** [[SQLITE_STATUS_MALLOC_SIZE]] ^(- SQLITE_STATUS_MALLOC_SIZE
-** - This parameter records the largest memory allocation request
-** handed to [sqlite3_malloc()] or [sqlite3_realloc()] (or their
-** internal equivalents). Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.
)^
-**
-** [[SQLITE_STATUS_MALLOC_COUNT]] ^(- SQLITE_STATUS_MALLOC_COUNT
-** - This parameter records the number of separate memory allocations
-** currently checked out.
)^
-**
-** [[SQLITE_STATUS_PAGECACHE_USED]] ^(- SQLITE_STATUS_PAGECACHE_USED
-** - This parameter returns the number of pages used out of the
-** [pagecache memory allocator] that was configured using
-** [SQLITE_CONFIG_PAGECACHE]. The
-** value returned is in pages, not in bytes.
)^
-**
-** [[SQLITE_STATUS_PAGECACHE_OVERFLOW]]
-** ^(- SQLITE_STATUS_PAGECACHE_OVERFLOW
-** - This parameter returns the number of bytes of page cache
-** allocation which could not be satisfied by the [SQLITE_CONFIG_PAGECACHE]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The
-** returned value includes allocations that overflowed because they
-** where too large (they were larger than the "sz" parameter to
-** [SQLITE_CONFIG_PAGECACHE]) and allocations that overflowed because
-** no space was left in the page cache.
)^
-**
-** [[SQLITE_STATUS_PAGECACHE_SIZE]] ^(- SQLITE_STATUS_PAGECACHE_SIZE
-** - This parameter records the largest memory allocation request
-** handed to [pagecache memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.
)^
-**
-** [[SQLITE_STATUS_SCRATCH_USED]] ^(- SQLITE_STATUS_SCRATCH_USED
-** - This parameter returns the number of allocations used out of the
-** [scratch memory allocator] configured using
-** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not
-** in bytes. Since a single thread may only have one scratch allocation
-** outstanding at time, this parameter also reports the number of threads
-** using scratch memory at the same time.
)^
-**
-** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(- SQLITE_STATUS_SCRATCH_OVERFLOW
-** - This parameter returns the number of bytes of scratch memory
-** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH]
-** buffer and where forced to overflow to [sqlite3_malloc()]. The values
-** returned include overflows because the requested allocation was too
-** larger (that is, because the requested allocation was larger than the
-** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer
-** slots were available.
-**
)^
-**
-** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(- SQLITE_STATUS_SCRATCH_SIZE
-** - This parameter records the largest memory allocation request
-** handed to [scratch memory allocator]. Only the value returned in the
-** *pHighwater parameter to [sqlite3_status()] is of interest.
-** The value written into the *pCurrent parameter is undefined.
)^
-**
-** [[SQLITE_STATUS_PARSER_STACK]] ^(- SQLITE_STATUS_PARSER_STACK
-** - The *pHighwater parameter records the deepest parser stack.
-** The *pCurrent value is undefined. The *pHighwater value is only
-** meaningful if SQLite is compiled with [YYTRACKMAXSTACKDEPTH].
)^
-**
-**
-** New status parameters may be added from time to time.
-*/
-#define SQLITE_STATUS_MEMORY_USED 0
-#define SQLITE_STATUS_PAGECACHE_USED 1
-#define SQLITE_STATUS_PAGECACHE_OVERFLOW 2
-#define SQLITE_STATUS_SCRATCH_USED 3
-#define SQLITE_STATUS_SCRATCH_OVERFLOW 4
-#define SQLITE_STATUS_MALLOC_SIZE 5
-#define SQLITE_STATUS_PARSER_STACK 6
-#define SQLITE_STATUS_PAGECACHE_SIZE 7
-#define SQLITE_STATUS_SCRATCH_SIZE 8
-#define SQLITE_STATUS_MALLOC_COUNT 9
-
-/*
-** CAPI3REF: Database Connection Status
-** METHOD: sqlite3
-**
-** ^This interface is used to retrieve runtime status information
-** about a single [database connection]. ^The first argument is the
-** database connection object to be interrogated. ^The second argument
-** is an integer constant, taken from the set of
-** [SQLITE_DBSTATUS options], that
-** determines the parameter to interrogate. The set of
-** [SQLITE_DBSTATUS options] is likely
-** to grow in future releases of SQLite.
-**
-** ^The current value of the requested parameter is written into *pCur
-** and the highest instantaneous value is written into *pHiwtr. ^If
-** the resetFlg is true, then the highest instantaneous value is
-** reset back down to the current value.
-**
-** ^The sqlite3_db_status() routine returns SQLITE_OK on success and a
-** non-zero [error code] on failure.
-**
-** See also: [sqlite3_status()] and [sqlite3_stmt_status()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int resetFlg);
-
-/*
-** CAPI3REF: Status Parameters for database connections
-** KEYWORDS: {SQLITE_DBSTATUS options}
-**
-** These constants are the available integer "verbs" that can be passed as
-** the second argument to the [sqlite3_db_status()] interface.
-**
-** New verbs may be added in future releases of SQLite. Existing verbs
-** might be discontinued. Applications should check the return code from
-** [sqlite3_db_status()] to make sure that the call worked.
-** The [sqlite3_db_status()] interface will return a non-zero error code
-** if a discontinued or unsupported verb is invoked.
-**
-**
-** [[SQLITE_DBSTATUS_LOOKASIDE_USED]] ^(- SQLITE_DBSTATUS_LOOKASIDE_USED
-** - This parameter returns the number of lookaside memory slots currently
-** checked out.
)^
-**
-** [[SQLITE_DBSTATUS_LOOKASIDE_HIT]] ^(- SQLITE_DBSTATUS_LOOKASIDE_HIT
-** - This parameter returns the number malloc attempts that were
-** satisfied using lookaside memory. Only the high-water value is meaningful;
-** the current value is always zero.)^
-**
-** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE]]
-** ^(
- SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE
-** - This parameter returns the number malloc attempts that might have
-** been satisfied using lookaside memory but failed due to the amount of
-** memory requested being larger than the lookaside slot size.
-** Only the high-water value is meaningful;
-** the current value is always zero.)^
-**
-** [[SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL]]
-** ^(
- SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL
-** - This parameter returns the number malloc attempts that might have
-** been satisfied using lookaside memory but failed due to all lookaside
-** memory already being in use.
-** Only the high-water value is meaningful;
-** the current value is always zero.)^
-**
-** [[SQLITE_DBSTATUS_CACHE_USED]] ^(
- SQLITE_DBSTATUS_CACHE_USED
-** - This parameter returns the approximate number of bytes of heap
-** memory used by all pager caches associated with the database connection.)^
-** ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_USED is always 0.
-**
-** [[SQLITE_DBSTATUS_SCHEMA_USED]] ^(
- SQLITE_DBSTATUS_SCHEMA_USED
-** - This parameter returns the approximate number of bytes of heap
-** memory used to store the schema for all databases associated
-** with the connection - main, temp, and any [ATTACH]-ed databases.)^
-** ^The full amount of memory used by the schemas is reported, even if the
-** schema memory is shared with other database connections due to
-** [shared cache mode] being enabled.
-** ^The highwater mark associated with SQLITE_DBSTATUS_SCHEMA_USED is always 0.
-**
-** [[SQLITE_DBSTATUS_STMT_USED]] ^(
- SQLITE_DBSTATUS_STMT_USED
-** - This parameter returns the approximate number of bytes of heap
-** and lookaside memory used by all prepared statements associated with
-** the database connection.)^
-** ^The highwater mark associated with SQLITE_DBSTATUS_STMT_USED is always 0.
-**
-**
-** [[SQLITE_DBSTATUS_CACHE_HIT]] ^(- SQLITE_DBSTATUS_CACHE_HIT
-** - This parameter returns the number of pager cache hits that have
-** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_HIT
-** is always 0.
-**
-**
-** [[SQLITE_DBSTATUS_CACHE_MISS]] ^(- SQLITE_DBSTATUS_CACHE_MISS
-** - This parameter returns the number of pager cache misses that have
-** occurred.)^ ^The highwater mark associated with SQLITE_DBSTATUS_CACHE_MISS
-** is always 0.
-**
-**
-** [[SQLITE_DBSTATUS_CACHE_WRITE]] ^(- SQLITE_DBSTATUS_CACHE_WRITE
-** - This parameter returns the number of dirty cache entries that have
-** been written to disk. Specifically, the number of pages written to the
-** wal file in wal mode databases, or the number of pages written to the
-** database file in rollback mode databases. Any pages written as part of
-** transaction rollback or database recovery operations are not included.
-** If an IO or other error occurs while writing a page to disk, the effect
-** on subsequent SQLITE_DBSTATUS_CACHE_WRITE requests is undefined.)^ ^The
-** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0.
-**
-**
-** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(- SQLITE_DBSTATUS_DEFERRED_FKS
-** - This parameter returns zero for the current value if and only if
-** all foreign key constraints (deferred or immediate) have been
-** resolved.)^ ^The highwater mark is always 0.
-**
-**
-*/
-#define SQLITE_DBSTATUS_LOOKASIDE_USED 0
-#define SQLITE_DBSTATUS_CACHE_USED 1
-#define SQLITE_DBSTATUS_SCHEMA_USED 2
-#define SQLITE_DBSTATUS_STMT_USED 3
-#define SQLITE_DBSTATUS_LOOKASIDE_HIT 4
-#define SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE 5
-#define SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL 6
-#define SQLITE_DBSTATUS_CACHE_HIT 7
-#define SQLITE_DBSTATUS_CACHE_MISS 8
-#define SQLITE_DBSTATUS_CACHE_WRITE 9
-#define SQLITE_DBSTATUS_DEFERRED_FKS 10
-#define SQLITE_DBSTATUS_MAX 10 /* Largest defined DBSTATUS */
-
-
-/*
-** CAPI3REF: Prepared Statement Status
-** METHOD: sqlite3_stmt
-**
-** ^(Each prepared statement maintains various
-** [SQLITE_STMTSTATUS counters] that measure the number
-** of times it has performed specific operations.)^ These counters can
-** be used to monitor the performance characteristics of the prepared
-** statements. For example, if the number of table steps greatly exceeds
-** the number of table searches or result rows, that would tend to indicate
-** that the prepared statement is using a full table scan rather than
-** an index.
-**
-** ^(This interface is used to retrieve and reset counter values from
-** a [prepared statement]. The first argument is the prepared statement
-** object to be interrogated. The second argument
-** is an integer code for a specific [SQLITE_STMTSTATUS counter]
-** to be interrogated.)^
-** ^The current value of the requested counter is returned.
-** ^If the resetFlg is true, then the counter is reset to zero after this
-** interface call returns.
-**
-** See also: [sqlite3_status()] and [sqlite3_db_status()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg);
-
-/*
-** CAPI3REF: Status Parameters for prepared statements
-** KEYWORDS: {SQLITE_STMTSTATUS counter} {SQLITE_STMTSTATUS counters}
-**
-** These preprocessor macros define integer codes that name counter
-** values associated with the [sqlite3_stmt_status()] interface.
-** The meanings of the various counters are as follows:
-**
-**
-** [[SQLITE_STMTSTATUS_FULLSCAN_STEP]] - SQLITE_STMTSTATUS_FULLSCAN_STEP
-** - ^This is the number of times that SQLite has stepped forward in
-** a table as part of a full table scan. Large numbers for this counter
-** may indicate opportunities for performance improvement through
-** careful use of indices.
-**
-** [[SQLITE_STMTSTATUS_SORT]] - SQLITE_STMTSTATUS_SORT
-** - ^This is the number of sort operations that have occurred.
-** A non-zero value in this counter may indicate an opportunity to
-** improvement performance through careful use of indices.
-**
-** [[SQLITE_STMTSTATUS_AUTOINDEX]] - SQLITE_STMTSTATUS_AUTOINDEX
-** - ^This is the number of rows inserted into transient indices that
-** were created automatically in order to help joins run faster.
-** A non-zero value in this counter may indicate an opportunity to
-** improvement performance by adding permanent indices that do not
-** need to be reinitialized each time the statement is run.
-**
-** [[SQLITE_STMTSTATUS_VM_STEP]] - SQLITE_STMTSTATUS_VM_STEP
-** - ^This is the number of virtual machine operations executed
-** by the prepared statement if that number is less than or equal
-** to 2147483647. The number of virtual machine operations can be
-** used as a proxy for the total work done by the prepared statement.
-** If the number of virtual machine operations exceeds 2147483647
-** then the value returned by this statement status code is undefined.
-**
-**
-*/
-#define SQLITE_STMTSTATUS_FULLSCAN_STEP 1
-#define SQLITE_STMTSTATUS_SORT 2
-#define SQLITE_STMTSTATUS_AUTOINDEX 3
-#define SQLITE_STMTSTATUS_VM_STEP 4
-
-/*
-** CAPI3REF: Custom Page Cache Object
-**
-** The sqlite3_pcache type is opaque. It is implemented by
-** the pluggable module. The SQLite core has no knowledge of
-** its size or internal structure and never deals with the
-** sqlite3_pcache object except by holding and passing pointers
-** to the object.
-**
-** See [sqlite3_pcache_methods2] for additional information.
-*/
-typedef struct sqlite3_pcache sqlite3_pcache;
-
-/*
-** CAPI3REF: Custom Page Cache Object
-**
-** The sqlite3_pcache_page object represents a single page in the
-** page cache. The page cache will allocate instances of this
-** object. Various methods of the page cache use pointers to instances
-** of this object as parameters or as their return value.
-**
-** See [sqlite3_pcache_methods2] for additional information.
-*/
-typedef struct sqlite3_pcache_page sqlite3_pcache_page;
-struct sqlite3_pcache_page {
- void *pBuf; /* The content of the page */
- void *pExtra; /* Extra information associated with the page */
-};
-
-/*
-** CAPI3REF: Application Defined Page Cache.
-** KEYWORDS: {page cache}
-**
-** ^(The [sqlite3_config]([SQLITE_CONFIG_PCACHE2], ...) interface can
-** register an alternative page cache implementation by passing in an
-** instance of the sqlite3_pcache_methods2 structure.)^
-** In many applications, most of the heap memory allocated by
-** SQLite is used for the page cache.
-** By implementing a
-** custom page cache using this API, an application can better control
-** the amount of memory consumed by SQLite, the way in which
-** that memory is allocated and released, and the policies used to
-** determine exactly which parts of a database file are cached and for
-** how long.
-**
-** The alternative page cache mechanism is an
-** extreme measure that is only needed by the most demanding applications.
-** The built-in page cache is recommended for most uses.
-**
-** ^(The contents of the sqlite3_pcache_methods2 structure are copied to an
-** internal buffer by SQLite within the call to [sqlite3_config]. Hence
-** the application may discard the parameter after the call to
-** [sqlite3_config()] returns.)^
-**
-** [[the xInit() page cache method]]
-** ^(The xInit() method is called once for each effective
-** call to [sqlite3_initialize()])^
-** (usually only once during the lifetime of the process). ^(The xInit()
-** method is passed a copy of the sqlite3_pcache_methods2.pArg value.)^
-** The intent of the xInit() method is to set up global data structures
-** required by the custom page cache implementation.
-** ^(If the xInit() method is NULL, then the
-** built-in default page cache is used instead of the application defined
-** page cache.)^
-**
-** [[the xShutdown() page cache method]]
-** ^The xShutdown() method is called by [sqlite3_shutdown()].
-** It can be used to clean up
-** any outstanding resources before process shutdown, if required.
-** ^The xShutdown() method may be NULL.
-**
-** ^SQLite automatically serializes calls to the xInit method,
-** so the xInit method need not be threadsafe. ^The
-** xShutdown method is only called from [sqlite3_shutdown()] so it does
-** not need to be threadsafe either. All other methods must be threadsafe
-** in multithreaded applications.
-**
-** ^SQLite will never invoke xInit() more than once without an intervening
-** call to xShutdown().
-**
-** [[the xCreate() page cache methods]]
-** ^SQLite invokes the xCreate() method to construct a new cache instance.
-** SQLite will typically create one cache instance for each open database file,
-** though this is not guaranteed. ^The
-** first parameter, szPage, is the size in bytes of the pages that must
-** be allocated by the cache. ^szPage will always a power of two. ^The
-** second parameter szExtra is a number of bytes of extra storage
-** associated with each page cache entry. ^The szExtra parameter will
-** a number less than 250. SQLite will use the
-** extra szExtra bytes on each page to store metadata about the underlying
-** database page on disk. The value passed into szExtra depends
-** on the SQLite version, the target platform, and how SQLite was compiled.
-** ^The third argument to xCreate(), bPurgeable, is true if the cache being
-** created will be used to cache database pages of a file stored on disk, or
-** false if it is used for an in-memory database. The cache implementation
-** does not have to do anything special based with the value of bPurgeable;
-** it is purely advisory. ^On a cache where bPurgeable is false, SQLite will
-** never invoke xUnpin() except to deliberately delete a page.
-** ^In other words, calls to xUnpin() on a cache with bPurgeable set to
-** false will always have the "discard" flag set to true.
-** ^Hence, a cache created with bPurgeable false will
-** never contain any unpinned pages.
-**
-** [[the xCachesize() page cache method]]
-** ^(The xCachesize() method may be called at any time by SQLite to set the
-** suggested maximum cache-size (number of pages stored by) the cache
-** instance passed as the first argument. This is the value configured using
-** the SQLite "[PRAGMA cache_size]" command.)^ As with the bPurgeable
-** parameter, the implementation is not required to do anything with this
-** value; it is advisory only.
-**
-** [[the xPagecount() page cache methods]]
-** The xPagecount() method must return the number of pages currently
-** stored in the cache, both pinned and unpinned.
-**
-** [[the xFetch() page cache methods]]
-** The xFetch() method locates a page in the cache and returns a pointer to
-** an sqlite3_pcache_page object associated with that page, or a NULL pointer.
-** The pBuf element of the returned sqlite3_pcache_page object will be a
-** pointer to a buffer of szPage bytes used to store the content of a
-** single database page. The pExtra element of sqlite3_pcache_page will be
-** a pointer to the szExtra bytes of extra storage that SQLite has requested
-** for each entry in the page cache.
-**
-** The page to be fetched is determined by the key. ^The minimum key value
-** is 1. After it has been retrieved using xFetch, the page is considered
-** to be "pinned".
-**
-** If the requested page is already in the page cache, then the page cache
-** implementation must return a pointer to the page buffer with its content
-** intact. If the requested page is not already in the cache, then the
-** cache implementation should use the value of the createFlag
-** parameter to help it determined what action to take:
-**
-**
-** | createFlag | Behavior when page is not already in cache
-** |
|---|
| 0 | Do not allocate a new page. Return NULL.
-** |
| 1 | Allocate a new page if it easy and convenient to do so.
-** Otherwise return NULL.
-** |
| 2 | Make every effort to allocate a new page. Only return
-** NULL if allocating a new page is effectively impossible.
-** |
-**
-** ^(SQLite will normally invoke xFetch() with a createFlag of 0 or 1. SQLite
-** will only use a createFlag of 2 after a prior call with a createFlag of 1
-** failed.)^ In between the to xFetch() calls, SQLite may
-** attempt to unpin one or more cache pages by spilling the content of
-** pinned pages to disk and synching the operating system disk cache.
-**
-** [[the xUnpin() page cache method]]
-** ^xUnpin() is called by SQLite with a pointer to a currently pinned page
-** as its second argument. If the third parameter, discard, is non-zero,
-** then the page must be evicted from the cache.
-** ^If the discard parameter is
-** zero, then the page may be discarded or retained at the discretion of
-** page cache implementation. ^The page cache implementation
-** may choose to evict unpinned pages at any time.
-**
-** The cache must not perform any reference counting. A single
-** call to xUnpin() unpins the page regardless of the number of prior calls
-** to xFetch().
-**
-** [[the xRekey() page cache methods]]
-** The xRekey() method is used to change the key value associated with the
-** page passed as the second argument. If the cache
-** previously contains an entry associated with newKey, it must be
-** discarded. ^Any prior cache entry associated with newKey is guaranteed not
-** to be pinned.
-**
-** When SQLite calls the xTruncate() method, the cache must discard all
-** existing cache entries with page numbers (keys) greater than or equal
-** to the value of the iLimit parameter passed to xTruncate(). If any
-** of these pages are pinned, they are implicitly unpinned, meaning that
-** they can be safely discarded.
-**
-** [[the xDestroy() page cache method]]
-** ^The xDestroy() method is used to delete a cache allocated by xCreate().
-** All resources associated with the specified cache should be freed. ^After
-** calling the xDestroy() method, SQLite considers the [sqlite3_pcache*]
-** handle invalid, and will not use it with any other sqlite3_pcache_methods2
-** functions.
-**
-** [[the xShrink() page cache method]]
-** ^SQLite invokes the xShrink() method when it wants the page cache to
-** free up as much of heap memory as possible. The page cache implementation
-** is not obligated to free any memory, but well-behaved implementations should
-** do their best.
-*/
-typedef struct sqlite3_pcache_methods2 sqlite3_pcache_methods2;
-struct sqlite3_pcache_methods2 {
- int iVersion;
- void *pArg;
- int (*xInit)(void*);
- void (*xShutdown)(void*);
- sqlite3_pcache *(*xCreate)(int szPage, int szExtra, int bPurgeable);
- void (*xCachesize)(sqlite3_pcache*, int nCachesize);
- int (*xPagecount)(sqlite3_pcache*);
- sqlite3_pcache_page *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
- void (*xUnpin)(sqlite3_pcache*, sqlite3_pcache_page*, int discard);
- void (*xRekey)(sqlite3_pcache*, sqlite3_pcache_page*,
- unsigned oldKey, unsigned newKey);
- void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
- void (*xDestroy)(sqlite3_pcache*);
- void (*xShrink)(sqlite3_pcache*);
-};
-
-/*
-** This is the obsolete pcache_methods object that has now been replaced
-** by sqlite3_pcache_methods2. This object is not used by SQLite. It is
-** retained in the header file for backwards compatibility only.
-*/
-typedef struct sqlite3_pcache_methods sqlite3_pcache_methods;
-struct sqlite3_pcache_methods {
- void *pArg;
- int (*xInit)(void*);
- void (*xShutdown)(void*);
- sqlite3_pcache *(*xCreate)(int szPage, int bPurgeable);
- void (*xCachesize)(sqlite3_pcache*, int nCachesize);
- int (*xPagecount)(sqlite3_pcache*);
- void *(*xFetch)(sqlite3_pcache*, unsigned key, int createFlag);
- void (*xUnpin)(sqlite3_pcache*, void*, int discard);
- void (*xRekey)(sqlite3_pcache*, void*, unsigned oldKey, unsigned newKey);
- void (*xTruncate)(sqlite3_pcache*, unsigned iLimit);
- void (*xDestroy)(sqlite3_pcache*);
-};
-
-
-/*
-** CAPI3REF: Online Backup Object
-**
-** The sqlite3_backup object records state information about an ongoing
-** online backup operation. ^The sqlite3_backup object is created by
-** a call to [sqlite3_backup_init()] and is destroyed by a call to
-** [sqlite3_backup_finish()].
-**
-** See Also: [Using the SQLite Online Backup API]
-*/
-typedef struct sqlite3_backup sqlite3_backup;
-
-/*
-** CAPI3REF: Online Backup API.
-**
-** The backup API copies the content of one database into another.
-** It is useful either for creating backups of databases or
-** for copying in-memory databases to or from persistent files.
-**
-** See Also: [Using the SQLite Online Backup API]
-**
-** ^SQLite holds a write transaction open on the destination database file
-** for the duration of the backup operation.
-** ^The source database is read-locked only while it is being read;
-** it is not locked continuously for the entire backup operation.
-** ^Thus, the backup may be performed on a live source database without
-** preventing other database connections from
-** reading or writing to the source database while the backup is underway.
-**
-** ^(To perform a backup operation:
-**
-** - sqlite3_backup_init() is called once to initialize the
-** backup,
-**
- sqlite3_backup_step() is called one or more times to transfer
-** the data between the two databases, and finally
-**
- sqlite3_backup_finish() is called to release all resources
-** associated with the backup operation.
-**
)^
-** There should be exactly one call to sqlite3_backup_finish() for each
-** successful call to sqlite3_backup_init().
-**
-** [[sqlite3_backup_init()]] sqlite3_backup_init()
-**
-** ^The D and N arguments to sqlite3_backup_init(D,N,S,M) are the
-** [database connection] associated with the destination database
-** and the database name, respectively.
-** ^The database name is "main" for the main database, "temp" for the
-** temporary database, or the name specified after the AS keyword in
-** an [ATTACH] statement for an attached database.
-** ^The S and M arguments passed to
-** sqlite3_backup_init(D,N,S,M) identify the [database connection]
-** and database name of the source database, respectively.
-** ^The source and destination [database connections] (parameters S and D)
-** must be different or else sqlite3_backup_init(D,N,S,M) will fail with
-** an error.
-**
-** ^A call to sqlite3_backup_init() will fail, returning NULL, if
-** there is already a read or read-write transaction open on the
-** destination database.
-**
-** ^If an error occurs within sqlite3_backup_init(D,N,S,M), then NULL is
-** returned and an error code and error message are stored in the
-** destination [database connection] D.
-** ^The error code and message for the failed call to sqlite3_backup_init()
-** can be retrieved using the [sqlite3_errcode()], [sqlite3_errmsg()], and/or
-** [sqlite3_errmsg16()] functions.
-** ^A successful call to sqlite3_backup_init() returns a pointer to an
-** [sqlite3_backup] object.
-** ^The [sqlite3_backup] object may be used with the sqlite3_backup_step() and
-** sqlite3_backup_finish() functions to perform the specified backup
-** operation.
-**
-** [[sqlite3_backup_step()]] sqlite3_backup_step()
-**
-** ^Function sqlite3_backup_step(B,N) will copy up to N pages between
-** the source and destination databases specified by [sqlite3_backup] object B.
-** ^If N is negative, all remaining source pages are copied.
-** ^If sqlite3_backup_step(B,N) successfully copies N pages and there
-** are still more pages to be copied, then the function returns [SQLITE_OK].
-** ^If sqlite3_backup_step(B,N) successfully finishes copying all pages
-** from source to destination, then it returns [SQLITE_DONE].
-** ^If an error occurs while running sqlite3_backup_step(B,N),
-** then an [error code] is returned. ^As well as [SQLITE_OK] and
-** [SQLITE_DONE], a call to sqlite3_backup_step() may return [SQLITE_READONLY],
-** [SQLITE_NOMEM], [SQLITE_BUSY], [SQLITE_LOCKED], or an
-** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX] extended error code.
-**
-** ^(The sqlite3_backup_step() might return [SQLITE_READONLY] if
-**
-** - the destination database was opened read-only, or
-**
- the destination database is using write-ahead-log journaling
-** and the destination and source page sizes differ, or
-**
- the destination database is an in-memory database and the
-** destination and source page sizes differ.
-**
)^
-**
-** ^If sqlite3_backup_step() cannot obtain a required file-system lock, then
-** the [sqlite3_busy_handler | busy-handler function]
-** is invoked (if one is specified). ^If the
-** busy-handler returns non-zero before the lock is available, then
-** [SQLITE_BUSY] is returned to the caller. ^In this case the call to
-** sqlite3_backup_step() can be retried later. ^If the source
-** [database connection]
-** is being used to write to the source database when sqlite3_backup_step()
-** is called, then [SQLITE_LOCKED] is returned immediately. ^Again, in this
-** case the call to sqlite3_backup_step() can be retried later on. ^(If
-** [SQLITE_IOERR_ACCESS | SQLITE_IOERR_XXX], [SQLITE_NOMEM], or
-** [SQLITE_READONLY] is returned, then
-** there is no point in retrying the call to sqlite3_backup_step(). These
-** errors are considered fatal.)^ The application must accept
-** that the backup operation has failed and pass the backup operation handle
-** to the sqlite3_backup_finish() to release associated resources.
-**
-** ^The first call to sqlite3_backup_step() obtains an exclusive lock
-** on the destination file. ^The exclusive lock is not released until either
-** sqlite3_backup_finish() is called or the backup operation is complete
-** and sqlite3_backup_step() returns [SQLITE_DONE]. ^Every call to
-** sqlite3_backup_step() obtains a [shared lock] on the source database that
-** lasts for the duration of the sqlite3_backup_step() call.
-** ^Because the source database is not locked between calls to
-** sqlite3_backup_step(), the source database may be modified mid-way
-** through the backup process. ^If the source database is modified by an
-** external process or via a database connection other than the one being
-** used by the backup operation, then the backup will be automatically
-** restarted by the next call to sqlite3_backup_step(). ^If the source
-** database is modified by the using the same database connection as is used
-** by the backup operation, then the backup database is automatically
-** updated at the same time.
-**
-** [[sqlite3_backup_finish()]] sqlite3_backup_finish()
-**
-** When sqlite3_backup_step() has returned [SQLITE_DONE], or when the
-** application wishes to abandon the backup operation, the application
-** should destroy the [sqlite3_backup] by passing it to sqlite3_backup_finish().
-** ^The sqlite3_backup_finish() interfaces releases all
-** resources associated with the [sqlite3_backup] object.
-** ^If sqlite3_backup_step() has not yet returned [SQLITE_DONE], then any
-** active write-transaction on the destination database is rolled back.
-** The [sqlite3_backup] object is invalid
-** and may not be used following a call to sqlite3_backup_finish().
-**
-** ^The value returned by sqlite3_backup_finish is [SQLITE_OK] if no
-** sqlite3_backup_step() errors occurred, regardless or whether or not
-** sqlite3_backup_step() completed.
-** ^If an out-of-memory condition or IO error occurred during any prior
-** sqlite3_backup_step() call on the same [sqlite3_backup] object, then
-** sqlite3_backup_finish() returns the corresponding [error code].
-**
-** ^A return of [SQLITE_BUSY] or [SQLITE_LOCKED] from sqlite3_backup_step()
-** is not a permanent error and does not affect the return value of
-** sqlite3_backup_finish().
-**
-** [[sqlite3_backup_remaining()]] [[sqlite3_backup_pagecount()]]
-** sqlite3_backup_remaining() and sqlite3_backup_pagecount()
-**
-** ^The sqlite3_backup_remaining() routine returns the number of pages still
-** to be backed up at the conclusion of the most recent sqlite3_backup_step().
-** ^The sqlite3_backup_pagecount() routine returns the total number of pages
-** in the source database at the conclusion of the most recent
-** sqlite3_backup_step().
-** ^(The values returned by these functions are only updated by
-** sqlite3_backup_step(). If the source database is modified in a way that
-** changes the size of the source database or the number of pages remaining,
-** those changes are not reflected in the output of sqlite3_backup_pagecount()
-** and sqlite3_backup_remaining() until after the next
-** sqlite3_backup_step().)^
-**
-** Concurrent Usage of Database Handles
-**
-** ^The source [database connection] may be used by the application for other
-** purposes while a backup operation is underway or being initialized.
-** ^If SQLite is compiled and configured to support threadsafe database
-** connections, then the source database connection may be used concurrently
-** from within other threads.
-**
-** However, the application must guarantee that the destination
-** [database connection] is not passed to any other API (by any thread) after
-** sqlite3_backup_init() is called and before the corresponding call to
-** sqlite3_backup_finish(). SQLite does not currently check to see
-** if the application incorrectly accesses the destination [database connection]
-** and so no error code is reported, but the operations may malfunction
-** nevertheless. Use of the destination database connection while a
-** backup is in progress might also also cause a mutex deadlock.
-**
-** If running in [shared cache mode], the application must
-** guarantee that the shared cache used by the destination database
-** is not accessed while the backup is running. In practice this means
-** that the application must guarantee that the disk file being
-** backed up to is not accessed by any connection within the process,
-** not just the specific connection that was passed to sqlite3_backup_init().
-**
-** The [sqlite3_backup] object itself is partially threadsafe. Multiple
-** threads may safely make multiple concurrent calls to sqlite3_backup_step().
-** However, the sqlite3_backup_remaining() and sqlite3_backup_pagecount()
-** APIs are not strictly speaking threadsafe. If they are invoked at the
-** same time as another thread is invoking sqlite3_backup_step() it is
-** possible that they return invalid values.
-*/
-SQLITE_API sqlite3_backup *SQLITE_STDCALL sqlite3_backup_init(
- sqlite3 *pDest, /* Destination database handle */
- const char *zDestName, /* Destination database name */
- sqlite3 *pSource, /* Source database handle */
- const char *zSourceName /* Source database name */
-);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_step(sqlite3_backup *p, int nPage);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_finish(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_remaining(sqlite3_backup *p);
-SQLITE_API int SQLITE_STDCALL sqlite3_backup_pagecount(sqlite3_backup *p);
-
-/*
-** CAPI3REF: Unlock Notification
-** METHOD: sqlite3
-**
-** ^When running in shared-cache mode, a database operation may fail with
-** an [SQLITE_LOCKED] error if the required locks on the shared-cache or
-** individual tables within the shared-cache cannot be obtained. See
-** [SQLite Shared-Cache Mode] for a description of shared-cache locking.
-** ^This API may be used to register a callback that SQLite will invoke
-** when the connection currently holding the required lock relinquishes it.
-** ^This API is only available if the library was compiled with the
-** [SQLITE_ENABLE_UNLOCK_NOTIFY] C-preprocessor symbol defined.
-**
-** See Also: [Using the SQLite Unlock Notification Feature].
-**
-** ^Shared-cache locks are released when a database connection concludes
-** its current transaction, either by committing it or rolling it back.
-**
-** ^When a connection (known as the blocked connection) fails to obtain a
-** shared-cache lock and SQLITE_LOCKED is returned to the caller, the
-** identity of the database connection (the blocking connection) that
-** has locked the required resource is stored internally. ^After an
-** application receives an SQLITE_LOCKED error, it may call the
-** sqlite3_unlock_notify() method with the blocked connection handle as
-** the first argument to register for a callback that will be invoked
-** when the blocking connections current transaction is concluded. ^The
-** callback is invoked from within the [sqlite3_step] or [sqlite3_close]
-** call that concludes the blocking connections transaction.
-**
-** ^(If sqlite3_unlock_notify() is called in a multi-threaded application,
-** there is a chance that the blocking connection will have already
-** concluded its transaction by the time sqlite3_unlock_notify() is invoked.
-** If this happens, then the specified callback is invoked immediately,
-** from within the call to sqlite3_unlock_notify().)^
-**
-** ^If the blocked connection is attempting to obtain a write-lock on a
-** shared-cache table, and more than one other connection currently holds
-** a read-lock on the same table, then SQLite arbitrarily selects one of
-** the other connections to use as the blocking connection.
-**
-** ^(There may be at most one unlock-notify callback registered by a
-** blocked connection. If sqlite3_unlock_notify() is called when the
-** blocked connection already has a registered unlock-notify callback,
-** then the new callback replaces the old.)^ ^If sqlite3_unlock_notify() is
-** called with a NULL pointer as its second argument, then any existing
-** unlock-notify callback is canceled. ^The blocked connections
-** unlock-notify callback may also be canceled by closing the blocked
-** connection using [sqlite3_close()].
-**
-** The unlock-notify callback is not reentrant. If an application invokes
-** any sqlite3_xxx API functions from within an unlock-notify callback, a
-** crash or deadlock may be the result.
-**
-** ^Unless deadlock is detected (see below), sqlite3_unlock_notify() always
-** returns SQLITE_OK.
-**
-** Callback Invocation Details
-**
-** When an unlock-notify callback is registered, the application provides a
-** single void* pointer that is passed to the callback when it is invoked.
-** However, the signature of the callback function allows SQLite to pass
-** it an array of void* context pointers. The first argument passed to
-** an unlock-notify callback is a pointer to an array of void* pointers,
-** and the second is the number of entries in the array.
-**
-** When a blocking connections transaction is concluded, there may be
-** more than one blocked connection that has registered for an unlock-notify
-** callback. ^If two or more such blocked connections have specified the
-** same callback function, then instead of invoking the callback function
-** multiple times, it is invoked once with the set of void* context pointers
-** specified by the blocked connections bundled together into an array.
-** This gives the application an opportunity to prioritize any actions
-** related to the set of unblocked database connections.
-**
-** Deadlock Detection
-**
-** Assuming that after registering for an unlock-notify callback a
-** database waits for the callback to be issued before taking any further
-** action (a reasonable assumption), then using this API may cause the
-** application to deadlock. For example, if connection X is waiting for
-** connection Y's transaction to be concluded, and similarly connection
-** Y is waiting on connection X's transaction, then neither connection
-** will proceed and the system may remain deadlocked indefinitely.
-**
-** To avoid this scenario, the sqlite3_unlock_notify() performs deadlock
-** detection. ^If a given call to sqlite3_unlock_notify() would put the
-** system in a deadlocked state, then SQLITE_LOCKED is returned and no
-** unlock-notify callback is registered. The system is said to be in
-** a deadlocked state if connection A has registered for an unlock-notify
-** callback on the conclusion of connection B's transaction, and connection
-** B has itself registered for an unlock-notify callback when connection
-** A's transaction is concluded. ^Indirect deadlock is also detected, so
-** the system is also considered to be deadlocked if connection B has
-** registered for an unlock-notify callback on the conclusion of connection
-** C's transaction, where connection C is waiting on connection A. ^Any
-** number of levels of indirection are allowed.
-**
-** The "DROP TABLE" Exception
-**
-** When a call to [sqlite3_step()] returns SQLITE_LOCKED, it is almost
-** always appropriate to call sqlite3_unlock_notify(). There is however,
-** one exception. When executing a "DROP TABLE" or "DROP INDEX" statement,
-** SQLite checks if there are any currently executing SELECT statements
-** that belong to the same connection. If there are, SQLITE_LOCKED is
-** returned. In this case there is no "blocking connection", so invoking
-** sqlite3_unlock_notify() results in the unlock-notify callback being
-** invoked immediately. If the application then re-attempts the "DROP TABLE"
-** or "DROP INDEX" query, an infinite loop might be the result.
-**
-** One way around this problem is to check the extended error code returned
-** by an sqlite3_step() call. ^(If there is a blocking connection, then the
-** extended error code is set to SQLITE_LOCKED_SHAREDCACHE. Otherwise, in
-** the special "DROP TABLE/INDEX" case, the extended error code is just
-** SQLITE_LOCKED.)^
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_unlock_notify(
- sqlite3 *pBlocked, /* Waiting connection */
- void (*xNotify)(void **apArg, int nArg), /* Callback function to invoke */
- void *pNotifyArg /* Argument to pass to xNotify */
-);
-
-
-/*
-** CAPI3REF: String Comparison
-**
-** ^The [sqlite3_stricmp()] and [sqlite3_strnicmp()] APIs allow applications
-** and extensions to compare the contents of two buffers containing UTF-8
-** strings in a case-independent fashion, using the same definition of "case
-** independence" that SQLite uses internally when comparing identifiers.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *, const char *);
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *, const char *, int);
-
-/*
-** CAPI3REF: String Globbing
-*
-** ^The [sqlite3_strglob(P,X)] interface returns zero if and only if
-** string X matches the [GLOB] pattern P.
-** ^The definition of [GLOB] pattern matching used in
-** [sqlite3_strglob(P,X)] is the same as for the "X GLOB P" operator in the
-** SQL dialect understood by SQLite. ^The [sqlite3_strglob(P,X)] function
-** is case sensitive.
-**
-** Note that this routine returns zero on a match and non-zero if the strings
-** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
-**
-** See also: [sqlite3_strlike()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strglob(const char *zGlob, const char *zStr);
-
-/*
-** CAPI3REF: String LIKE Matching
-*
-** ^The [sqlite3_strlike(P,X,E)] interface returns zero if and only if
-** string X matches the [LIKE] pattern P with escape character E.
-** ^The definition of [LIKE] pattern matching used in
-** [sqlite3_strlike(P,X,E)] is the same as for the "X LIKE P ESCAPE E"
-** operator in the SQL dialect understood by SQLite. ^For "X LIKE P" without
-** the ESCAPE clause, set the E parameter of [sqlite3_strlike(P,X,E)] to 0.
-** ^As with the LIKE operator, the [sqlite3_strlike(P,X,E)] function is case
-** insensitive - equivalent upper and lower case ASCII characters match
-** one another.
-**
-** ^The [sqlite3_strlike(P,X,E)] function matches Unicode characters, though
-** only ASCII characters are case folded.
-**
-** Note that this routine returns zero on a match and non-zero if the strings
-** do not match, the same as [sqlite3_stricmp()] and [sqlite3_strnicmp()].
-**
-** See also: [sqlite3_strglob()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_strlike(const char *zGlob, const char *zStr, unsigned int cEsc);
-
-/*
-** CAPI3REF: Error Logging Interface
-**
-** ^The [sqlite3_log()] interface writes a message into the [error log]
-** established by the [SQLITE_CONFIG_LOG] option to [sqlite3_config()].
-** ^If logging is enabled, the zFormat string and subsequent arguments are
-** used with [sqlite3_snprintf()] to generate the final output string.
-**
-** The sqlite3_log() interface is intended for use by extensions such as
-** virtual tables, collating functions, and SQL functions. While there is
-** nothing to prevent an application from calling sqlite3_log(), doing so
-** is considered bad form.
-**
-** The zFormat string must not be NULL.
-**
-** To avoid deadlocks and other threading problems, the sqlite3_log() routine
-** will not use dynamically allocated memory. The log message is stored in
-** a fixed-length buffer on the stack. If the log message is longer than
-** a few hundred characters, it will be truncated to the length of the
-** buffer.
-*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...);
-
-/*
-** CAPI3REF: Write-Ahead Log Commit Hook
-** METHOD: sqlite3
-**
-** ^The [sqlite3_wal_hook()] function is used to register a callback that
-** is invoked each time data is committed to a database in wal mode.
-**
-** ^(The callback is invoked by SQLite after the commit has taken place and
-** the associated write-lock on the database released)^, so the implementation
-** may read, write or [checkpoint] the database as required.
-**
-** ^The first parameter passed to the callback function when it is invoked
-** is a copy of the third parameter passed to sqlite3_wal_hook() when
-** registering the callback. ^The second is a copy of the database handle.
-** ^The third parameter is the name of the database that was written to -
-** either "main" or the name of an [ATTACH]-ed database. ^The fourth parameter
-** is the number of pages currently in the write-ahead log file,
-** including those that were just committed.
-**
-** The callback function should normally return [SQLITE_OK]. ^If an error
-** code is returned, that error will propagate back up through the
-** SQLite code base to cause the statement that provoked the callback
-** to report an error, though the commit will have still occurred. If the
-** callback returns [SQLITE_ROW] or [SQLITE_DONE], or if it returns a value
-** that does not correspond to any valid SQLite error code, the results
-** are undefined.
-**
-** A single database handle may have at most a single write-ahead log callback
-** registered at one time. ^Calling [sqlite3_wal_hook()] replaces any
-** previously registered write-ahead log callback. ^Note that the
-** [sqlite3_wal_autocheckpoint()] interface and the
-** [wal_autocheckpoint pragma] both invoke [sqlite3_wal_hook()] and will
-** overwrite any prior [sqlite3_wal_hook()] settings.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_wal_hook(
- sqlite3*,
- int(*)(void *,sqlite3*,const char*,int),
- void*
-);
-
-/*
-** CAPI3REF: Configure an auto-checkpoint
-** METHOD: sqlite3
-**
-** ^The [sqlite3_wal_autocheckpoint(D,N)] is a wrapper around
-** [sqlite3_wal_hook()] that causes any database on [database connection] D
-** to automatically [checkpoint]
-** after committing a transaction if there are N or
-** more frames in the [write-ahead log] file. ^Passing zero or
-** a negative value as the nFrame parameter disables automatic
-** checkpoints entirely.
-**
-** ^The callback registered by this function replaces any existing callback
-** registered using [sqlite3_wal_hook()]. ^Likewise, registering a callback
-** using [sqlite3_wal_hook()] disables the automatic checkpoint mechanism
-** configured by this function.
-**
-** ^The [wal_autocheckpoint pragma] can be used to invoke this interface
-** from SQL.
-**
-** ^Checkpoints initiated by this mechanism are
-** [sqlite3_wal_checkpoint_v2|PASSIVE].
-**
-** ^Every new [database connection] defaults to having the auto-checkpoint
-** enabled with a threshold of 1000 or [SQLITE_DEFAULT_WAL_AUTOCHECKPOINT]
-** pages. The use of this interface
-** is only necessary if the default setting is found to be suboptimal
-** for a particular application.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_autocheckpoint(sqlite3 *db, int N);
-
-/*
-** CAPI3REF: Checkpoint a database
-** METHOD: sqlite3
-**
-** ^(The sqlite3_wal_checkpoint(D,X) is equivalent to
-** [sqlite3_wal_checkpoint_v2](D,X,[SQLITE_CHECKPOINT_PASSIVE],0,0).)^
-**
-** In brief, sqlite3_wal_checkpoint(D,X) causes the content in the
-** [write-ahead log] for database X on [database connection] D to be
-** transferred into the database file and for the write-ahead log to
-** be reset. See the [checkpointing] documentation for addition
-** information.
-**
-** This interface used to be the only way to cause a checkpoint to
-** occur. But then the newer and more powerful [sqlite3_wal_checkpoint_v2()]
-** interface was added. This interface is retained for backwards
-** compatibility and as a convenience for applications that need to manually
-** start a callback but which do not need the full power (and corresponding
-** complication) of [sqlite3_wal_checkpoint_v2()].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb);
-
-/*
-** CAPI3REF: Checkpoint a database
-** METHOD: sqlite3
-**
-** ^(The sqlite3_wal_checkpoint_v2(D,X,M,L,C) interface runs a checkpoint
-** operation on database X of [database connection] D in mode M. Status
-** information is written back into integers pointed to by L and C.)^
-** ^(The M parameter must be a valid [checkpoint mode]:)^
-**
-**
-** - SQLITE_CHECKPOINT_PASSIVE
-
-** ^Checkpoint as many frames as possible without waiting for any database
-** readers or writers to finish, then sync the database file if all frames
-** in the log were checkpointed. ^The [busy-handler callback]
-** is never invoked in the SQLITE_CHECKPOINT_PASSIVE mode.
-** ^On the other hand, passive mode might leave the checkpoint unfinished
-** if there are concurrent readers or writers.
-**
-**
- SQLITE_CHECKPOINT_FULL
-
-** ^This mode blocks (it invokes the
-** [sqlite3_busy_handler|busy-handler callback]) until there is no
-** database writer and all readers are reading from the most recent database
-** snapshot. ^It then checkpoints all frames in the log file and syncs the
-** database file. ^This mode blocks new database writers while it is pending,
-** but new database readers are allowed to continue unimpeded.
-**
-**
- SQLITE_CHECKPOINT_RESTART
-
-** ^This mode works the same way as SQLITE_CHECKPOINT_FULL with the addition
-** that after checkpointing the log file it blocks (calls the
-** [busy-handler callback])
-** until all readers are reading from the database file only. ^This ensures
-** that the next writer will restart the log file from the beginning.
-** ^Like SQLITE_CHECKPOINT_FULL, this mode blocks new
-** database writer attempts while it is pending, but does not impede readers.
-**
-**
- SQLITE_CHECKPOINT_TRUNCATE
-
-** ^This mode works the same way as SQLITE_CHECKPOINT_RESTART with the
-** addition that it also truncates the log file to zero bytes just prior
-** to a successful return.
-**
-**
-** ^If pnLog is not NULL, then *pnLog is set to the total number of frames in
-** the log file or to -1 if the checkpoint could not run because
-** of an error or because the database is not in [WAL mode]. ^If pnCkpt is not
-** NULL,then *pnCkpt is set to the total number of checkpointed frames in the
-** log file (including any that were already checkpointed before the function
-** was called) or to -1 if the checkpoint could not run due to an error or
-** because the database is not in WAL mode. ^Note that upon successful
-** completion of an SQLITE_CHECKPOINT_TRUNCATE, the log file will have been
-** truncated to zero bytes and so both *pnLog and *pnCkpt will be set to zero.
-**
-** ^All calls obtain an exclusive "checkpoint" lock on the database file. ^If
-** any other process is running a checkpoint operation at the same time, the
-** lock cannot be obtained and SQLITE_BUSY is returned. ^Even if there is a
-** busy-handler configured, it will not be invoked in this case.
-**
-** ^The SQLITE_CHECKPOINT_FULL, RESTART and TRUNCATE modes also obtain the
-** exclusive "writer" lock on the database file. ^If the writer lock cannot be
-** obtained immediately, and a busy-handler is configured, it is invoked and
-** the writer lock retried until either the busy-handler returns 0 or the lock
-** is successfully obtained. ^The busy-handler is also invoked while waiting for
-** database readers as described above. ^If the busy-handler returns 0 before
-** the writer lock is obtained or while waiting for database readers, the
-** checkpoint operation proceeds from that point in the same way as
-** SQLITE_CHECKPOINT_PASSIVE - checkpointing as many frames as possible
-** without blocking any further. ^SQLITE_BUSY is returned in this case.
-**
-** ^If parameter zDb is NULL or points to a zero length string, then the
-** specified operation is attempted on all WAL databases [attached] to
-** [database connection] db. In this case the
-** values written to output parameters *pnLog and *pnCkpt are undefined. ^If
-** an SQLITE_BUSY error is encountered when processing one or more of the
-** attached WAL databases, the operation is still attempted on any remaining
-** attached databases and SQLITE_BUSY is returned at the end. ^If any other
-** error occurs while processing an attached database, processing is abandoned
-** and the error code is returned to the caller immediately. ^If no error
-** (SQLITE_BUSY or otherwise) is encountered while processing the attached
-** databases, SQLITE_OK is returned.
-**
-** ^If database zDb is the name of an attached database that is not in WAL
-** mode, SQLITE_OK is returned and both *pnLog and *pnCkpt set to -1. ^If
-** zDb is not NULL (or a zero length string) and is not the name of any
-** attached database, SQLITE_ERROR is returned to the caller.
-**
-** ^Unless it returns SQLITE_MISUSE,
-** the sqlite3_wal_checkpoint_v2() interface
-** sets the error information that is queried by
-** [sqlite3_errcode()] and [sqlite3_errmsg()].
-**
-** ^The [PRAGMA wal_checkpoint] command can be used to invoke this interface
-** from SQL.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_wal_checkpoint_v2(
- sqlite3 *db, /* Database handle */
- const char *zDb, /* Name of attached database (or NULL) */
- int eMode, /* SQLITE_CHECKPOINT_* value */
- int *pnLog, /* OUT: Size of WAL log in frames */
- int *pnCkpt /* OUT: Total number of frames checkpointed */
-);
-
-/*
-** CAPI3REF: Checkpoint Mode Values
-** KEYWORDS: {checkpoint mode}
-**
-** These constants define all valid values for the "checkpoint mode" passed
-** as the third parameter to the [sqlite3_wal_checkpoint_v2()] interface.
-** See the [sqlite3_wal_checkpoint_v2()] documentation for details on the
-** meaning of each of these checkpoint modes.
-*/
-#define SQLITE_CHECKPOINT_PASSIVE 0 /* Do as much as possible w/o blocking */
-#define SQLITE_CHECKPOINT_FULL 1 /* Wait for writers, then checkpoint */
-#define SQLITE_CHECKPOINT_RESTART 2 /* Like FULL but wait for for readers */
-#define SQLITE_CHECKPOINT_TRUNCATE 3 /* Like RESTART but also truncate WAL */
-
-/*
-** CAPI3REF: Virtual Table Interface Configuration
-**
-** This function may be called by either the [xConnect] or [xCreate] method
-** of a [virtual table] implementation to configure
-** various facets of the virtual table interface.
-**
-** If this interface is invoked outside the context of an xConnect or
-** xCreate virtual table method then the behavior is undefined.
-**
-** At present, there is only one option that may be configured using
-** this function. (See [SQLITE_VTAB_CONSTRAINT_SUPPORT].) Further options
-** may be added in the future.
-*/
-SQLITE_API int SQLITE_CDECL sqlite3_vtab_config(sqlite3*, int op, ...);
-
-/*
-** CAPI3REF: Virtual Table Configuration Options
-**
-** These macros define the various options to the
-** [sqlite3_vtab_config()] interface that [virtual table] implementations
-** can use to customize and optimize their behavior.
-**
-**
-** - SQLITE_VTAB_CONSTRAINT_SUPPORT
-**
- Calls of the form
-** [sqlite3_vtab_config](db,SQLITE_VTAB_CONSTRAINT_SUPPORT,X) are supported,
-** where X is an integer. If X is zero, then the [virtual table] whose
-** [xCreate] or [xConnect] method invoked [sqlite3_vtab_config()] does not
-** support constraints. In this configuration (which is the default) if
-** a call to the [xUpdate] method returns [SQLITE_CONSTRAINT], then the entire
-** statement is rolled back as if [ON CONFLICT | OR ABORT] had been
-** specified as part of the users SQL statement, regardless of the actual
-** ON CONFLICT mode specified.
-**
-** If X is non-zero, then the virtual table implementation guarantees
-** that if [xUpdate] returns [SQLITE_CONSTRAINT], it will do so before
-** any modifications to internal or persistent data structures have been made.
-** If the [ON CONFLICT] mode is ABORT, FAIL, IGNORE or ROLLBACK, SQLite
-** is able to roll back a statement or database transaction, and abandon
-** or continue processing the current SQL statement as appropriate.
-** If the ON CONFLICT mode is REPLACE and the [xUpdate] method returns
-** [SQLITE_CONSTRAINT], SQLite handles this as if the ON CONFLICT mode
-** had been ABORT.
-**
-** Virtual table implementations that are required to handle OR REPLACE
-** must do so within the [xUpdate] method. If a call to the
-** [sqlite3_vtab_on_conflict()] function indicates that the current ON
-** CONFLICT policy is REPLACE, the virtual table implementation should
-** silently replace the appropriate rows within the xUpdate callback and
-** return SQLITE_OK. Or, if this is not possible, it may return
-** SQLITE_CONSTRAINT, in which case SQLite falls back to OR ABORT
-** constraint handling.
-**
-*/
-#define SQLITE_VTAB_CONSTRAINT_SUPPORT 1
-
-/*
-** CAPI3REF: Determine The Virtual Table Conflict Policy
-**
-** This function may only be called from within a call to the [xUpdate] method
-** of a [virtual table] implementation for an INSERT or UPDATE operation. ^The
-** value returned is one of [SQLITE_ROLLBACK], [SQLITE_IGNORE], [SQLITE_FAIL],
-** [SQLITE_ABORT], or [SQLITE_REPLACE], according to the [ON CONFLICT] mode
-** of the SQL statement that triggered the call to the [xUpdate] method of the
-** [virtual table].
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vtab_on_conflict(sqlite3 *);
-
-/*
-** CAPI3REF: Conflict resolution modes
-** KEYWORDS: {conflict resolution mode}
-**
-** These constants are returned by [sqlite3_vtab_on_conflict()] to
-** inform a [virtual table] implementation what the [ON CONFLICT] mode
-** is for the SQL statement being evaluated.
-**
-** Note that the [SQLITE_IGNORE] constant is also used as a potential
-** return value from the [sqlite3_set_authorizer()] callback and that
-** [SQLITE_ABORT] is also a [result code].
-*/
-#define SQLITE_ROLLBACK 1
-/* #define SQLITE_IGNORE 2 // Also used by sqlite3_authorizer() callback */
-#define SQLITE_FAIL 3
-/* #define SQLITE_ABORT 4 // Also an error code */
-#define SQLITE_REPLACE 5
-
-/*
-** CAPI3REF: Prepared Statement Scan Status Opcodes
-** KEYWORDS: {scanstatus options}
-**
-** The following constants can be used for the T parameter to the
-** [sqlite3_stmt_scanstatus(S,X,T,V)] interface. Each constant designates a
-** different metric for sqlite3_stmt_scanstatus() to return.
-**
-** When the value returned to V is a string, space to hold that string is
-** managed by the prepared statement S and will be automatically freed when
-** S is finalized.
-**
-**
-** [[SQLITE_SCANSTAT_NLOOP]] - SQLITE_SCANSTAT_NLOOP
-** - ^The [sqlite3_int64] variable pointed to by the T parameter will be
-** set to the total number of times that the X-th loop has run.
-**
-** [[SQLITE_SCANSTAT_NVISIT]] - SQLITE_SCANSTAT_NVISIT
-** - ^The [sqlite3_int64] variable pointed to by the T parameter will be set
-** to the total number of rows examined by all iterations of the X-th loop.
-**
-** [[SQLITE_SCANSTAT_EST]] - SQLITE_SCANSTAT_EST
-** - ^The "double" variable pointed to by the T parameter will be set to the
-** query planner's estimate for the average number of rows output from each
-** iteration of the X-th loop. If the query planner's estimates was accurate,
-** then this value will approximate the quotient NVISIT/NLOOP and the
-** product of this value for all prior loops with the same SELECTID will
-** be the NLOOP value for the current loop.
-**
-** [[SQLITE_SCANSTAT_NAME]]
- SQLITE_SCANSTAT_NAME
-** - ^The "const char *" variable pointed to by the T parameter will be set
-** to a zero-terminated UTF-8 string containing the name of the index or table
-** used for the X-th loop.
-**
-** [[SQLITE_SCANSTAT_EXPLAIN]]
- SQLITE_SCANSTAT_EXPLAIN
-** - ^The "const char *" variable pointed to by the T parameter will be set
-** to a zero-terminated UTF-8 string containing the [EXPLAIN QUERY PLAN]
-** description for the X-th loop.
-**
-** [[SQLITE_SCANSTAT_SELECTID]]
- SQLITE_SCANSTAT_SELECT
-** - ^The "int" variable pointed to by the T parameter will be set to the
-** "select-id" for the X-th loop. The select-id identifies which query or
-** subquery the loop is part of. The main query has a select-id of zero.
-** The select-id is the same value as is output in the first column
-** of an [EXPLAIN QUERY PLAN] query.
-**
-*/
-#define SQLITE_SCANSTAT_NLOOP 0
-#define SQLITE_SCANSTAT_NVISIT 1
-#define SQLITE_SCANSTAT_EST 2
-#define SQLITE_SCANSTAT_NAME 3
-#define SQLITE_SCANSTAT_EXPLAIN 4
-#define SQLITE_SCANSTAT_SELECTID 5
-
-/*
-** CAPI3REF: Prepared Statement Scan Status
-** METHOD: sqlite3_stmt
-**
-** This interface returns information about the predicted and measured
-** performance for pStmt. Advanced applications can use this
-** interface to compare the predicted and the measured performance and
-** issue warnings and/or rerun [ANALYZE] if discrepancies are found.
-**
-** Since this interface is expected to be rarely used, it is only
-** available if SQLite is compiled using the [SQLITE_ENABLE_STMT_SCANSTATUS]
-** compile-time option.
-**
-** The "iScanStatusOp" parameter determines which status information to return.
-** The "iScanStatusOp" must be one of the [scanstatus options] or the behavior
-** of this interface is undefined.
-** ^The requested measurement is written into a variable pointed to by
-** the "pOut" parameter.
-** Parameter "idx" identifies the specific loop to retrieve statistics for.
-** Loops are numbered starting from zero. ^If idx is out of range - less than
-** zero or greater than or equal to the total number of loops used to implement
-** the statement - a non-zero value is returned and the variable that pOut
-** points to is unchanged.
-**
-** ^Statistics might not be available for all loops in all statements. ^In cases
-** where there exist loops with no available statistics, this function behaves
-** as if the loop did not exist - it returns non-zero and leave the variable
-** that pOut points to unchanged.
-**
-** See also: [sqlite3_stmt_scanstatus_reset()]
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stmt_scanstatus(
- sqlite3_stmt *pStmt, /* Prepared statement for which info desired */
- int idx, /* Index of loop to report on */
- int iScanStatusOp, /* Information desired. SQLITE_SCANSTAT_* */
- void *pOut /* Result written here */
-);
-
-/*
-** CAPI3REF: Zero Scan-Status Counters
-** METHOD: sqlite3_stmt
-**
-** ^Zero all [sqlite3_stmt_scanstatus()] related event counters.
-**
-** This API is only available if the library is built with pre-processor
-** symbol [SQLITE_ENABLE_STMT_SCANSTATUS] defined.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_stmt_scanstatus_reset(sqlite3_stmt*);
-
-/*
-** CAPI3REF: Flush caches to disk mid-transaction
-**
-** ^If a write-transaction is open on [database connection] D when the
-** [sqlite3_db_cacheflush(D)] interface invoked, any dirty
-** pages in the pager-cache that are not currently in use are written out
-** to disk. A dirty page may be in use if a database cursor created by an
-** active SQL statement is reading from it, or if it is page 1 of a database
-** file (page 1 is always "in use"). ^The [sqlite3_db_cacheflush(D)]
-** interface flushes caches for all schemas - "main", "temp", and
-** any [attached] databases.
-**
-** ^If this function needs to obtain extra database locks before dirty pages
-** can be flushed to disk, it does so. ^If those locks cannot be obtained
-** immediately and there is a busy-handler callback configured, it is invoked
-** in the usual manner. ^If the required lock still cannot be obtained, then
-** the database is skipped and an attempt made to flush any dirty pages
-** belonging to the next (if any) database. ^If any databases are skipped
-** because locks cannot be obtained, but no other error occurs, this
-** function returns SQLITE_BUSY.
-**
-** ^If any other error occurs while flushing dirty pages to disk (for
-** example an IO error or out-of-memory condition), then processing is
-** abandoned and an SQLite [error code] is returned to the caller immediately.
-**
-** ^Otherwise, if no error occurs, [sqlite3_db_cacheflush()] returns SQLITE_OK.
-**
-** ^This function does not set the database handle error code or message
-** returned by the [sqlite3_errcode()] and [sqlite3_errmsg()] functions.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_cacheflush(sqlite3*);
-
-/*
-** CAPI3REF: The pre-update hook.
-**
-** ^These interfaces are only available if SQLite is compiled using the
-** [SQLITE_ENABLE_PREUPDATE_HOOK] compile-time option.
-**
-** ^The [sqlite3_preupdate_hook()] interface registers a callback function
-** that is invoked prior to each [INSERT], [UPDATE], and [DELETE] operation
-** on a [rowid table].
-** ^At most one preupdate hook may be registered at a time on a single
-** [database connection]; each call to [sqlite3_preupdate_hook()] overrides
-** the previous setting.
-** ^The preupdate hook is disabled by invoking [sqlite3_preupdate_hook()]
-** with a NULL pointer as the second parameter.
-** ^The third parameter to [sqlite3_preupdate_hook()] is passed through as
-** the first parameter to callbacks.
-**
-** ^The preupdate hook only fires for changes to [rowid tables]; the preupdate
-** hook is not invoked for changes to [virtual tables] or [WITHOUT ROWID]
-** tables.
-**
-** ^The second parameter to the preupdate callback is a pointer to
-** the [database connection] that registered the preupdate hook.
-** ^The third parameter to the preupdate callback is one of the constants
-** [SQLITE_INSERT], [SQLITE_DELETE], or [SQLITE_UPDATE] to indentify the
-** kind of update operation that is about to occur.
-** ^(The fourth parameter to the preupdate callback is the name of the
-** database within the database connection that is being modified. This
-** will be "main" for the main database or "temp" for TEMP tables or
-** the name given after the AS keyword in the [ATTACH] statement for attached
-** databases.)^
-** ^The fifth parameter to the preupdate callback is the name of the
-** table that is being modified.
-** ^The sixth parameter to the preupdate callback is the initial [rowid] of the
-** row being changes for SQLITE_UPDATE and SQLITE_DELETE changes and is
-** undefined for SQLITE_INSERT changes.
-** ^The seventh parameter to the preupdate callback is the final [rowid] of
-** the row being changed for SQLITE_UPDATE and SQLITE_INSERT changes and is
-** undefined for SQLITE_DELETE changes.
-**
-** The [sqlite3_preupdate_old()], [sqlite3_preupdate_new()],
-** [sqlite3_preupdate_count()], and [sqlite3_preupdate_depth()] interfaces
-** provide additional information about a preupdate event. These routines
-** may only be called from within a preupdate callback. Invoking any of
-** these routines from outside of a preupdate callback or with a
-** [database connection] pointer that is different from the one supplied
-** to the preupdate callback results in undefined and probably undesirable
-** behavior.
-**
-** ^The [sqlite3_preupdate_count(D)] interface returns the number of columns
-** in the row that is being inserted, updated, or deleted.
-**
-** ^The [sqlite3_preupdate_old(D,N,P)] interface writes into P a pointer to
-** a [protected sqlite3_value] that contains the value of the Nth column of
-** the table row before it is updated. The N parameter must be between 0
-** and one less than the number of columns or the behavior will be
-** undefined. This must only be used within SQLITE_UPDATE and SQLITE_DELETE
-** preupdate callbacks; if it is used by an SQLITE_INSERT callback then the
-** behavior is undefined. The [sqlite3_value] that P points to
-** will be destroyed when the preupdate callback returns.
-**
-** ^The [sqlite3_preupdate_new(D,N,P)] interface writes into P a pointer to
-** a [protected sqlite3_value] that contains the value of the Nth column of
-** the table row after it is updated. The N parameter must be between 0
-** and one less than the number of columns or the behavior will be
-** undefined. This must only be used within SQLITE_INSERT and SQLITE_UPDATE
-** preupdate callbacks; if it is used by an SQLITE_DELETE callback then the
-** behavior is undefined. The [sqlite3_value] that P points to
-** will be destroyed when the preupdate callback returns.
-**
-** ^The [sqlite3_preupdate_depth(D)] interface returns 0 if the preupdate
-** callback was invoked as a result of a direct insert, update, or delete
-** operation; or 1 for inserts, updates, or deletes invoked by top-level
-** triggers; or 2 for changes resulting from triggers called by top-level
-** triggers; and so forth.
-**
-** See also: [sqlite3_update_hook()]
-*/
-SQLITE_API SQLITE_EXPERIMENTAL void *SQLITE_STDCALL sqlite3_preupdate_hook(
- sqlite3 *db,
- void(*xPreUpdate)(
- void *pCtx, /* Copy of third arg to preupdate_hook() */
- sqlite3 *db, /* Database handle */
- int op, /* SQLITE_UPDATE, DELETE or INSERT */
- char const *zDb, /* Database name */
- char const *zName, /* Table name */
- sqlite3_int64 iKey1, /* Rowid of row about to be deleted/updated */
- sqlite3_int64 iKey2 /* New rowid value (for a rowid UPDATE) */
- ),
- void*
-);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_old(sqlite3 *, int, sqlite3_value **);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_count(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_depth(sqlite3 *);
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_preupdate_new(sqlite3 *, int, sqlite3_value **);
-
-/*
-** CAPI3REF: Low-level system error code
-**
-** ^Attempt to return the underlying operating system error code or error
-** number that caused the most recent I/O error or failure to open a file.
-** The return value is OS-dependent. For example, on unix systems, after
-** [sqlite3_open_v2()] returns [SQLITE_CANTOPEN], this interface could be
-** called to get back the underlying "errno" that caused the problem, such
-** as ENOSPC, EAUTH, EISDIR, and so forth.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_system_errno(sqlite3*);
-
-/*
-** CAPI3REF: Database Snapshot
-** KEYWORDS: {snapshot}
-** EXPERIMENTAL
-**
-** An instance of the snapshot object records the state of a [WAL mode]
-** database for some specific point in history.
-**
-** In [WAL mode], multiple [database connections] that are open on the
-** same database file can each be reading a different historical version
-** of the database file. When a [database connection] begins a read
-** transaction, that connection sees an unchanging copy of the database
-** as it existed for the point in time when the transaction first started.
-** Subsequent changes to the database from other connections are not seen
-** by the reader until a new read transaction is started.
-**
-** The sqlite3_snapshot object records state information about an historical
-** version of the database file so that it is possible to later open a new read
-** transaction that sees that historical version of the database rather than
-** the most recent version.
-**
-** The constructor for this object is [sqlite3_snapshot_get()]. The
-** [sqlite3_snapshot_open()] method causes a fresh read transaction to refer
-** to an historical snapshot (if possible). The destructor for
-** sqlite3_snapshot objects is [sqlite3_snapshot_free()].
-*/
-typedef struct sqlite3_snapshot sqlite3_snapshot;
-
-/*
-** CAPI3REF: Record A Database Snapshot
-** EXPERIMENTAL
-**
-** ^The [sqlite3_snapshot_get(D,S,P)] interface attempts to make a
-** new [sqlite3_snapshot] object that records the current state of
-** schema S in database connection D. ^On success, the
-** [sqlite3_snapshot_get(D,S,P)] interface writes a pointer to the newly
-** created [sqlite3_snapshot] object into *P and returns SQLITE_OK.
-** ^If schema S of [database connection] D is not a [WAL mode] database
-** that is in a read transaction, then [sqlite3_snapshot_get(D,S,P)]
-** leaves the *P value unchanged and returns an appropriate [error code].
-**
-** The [sqlite3_snapshot] object returned from a successful call to
-** [sqlite3_snapshot_get()] must be freed using [sqlite3_snapshot_free()]
-** to avoid a memory leak.
-**
-** The [sqlite3_snapshot_get()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
-*/
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_get(
- sqlite3 *db,
- const char *zSchema,
- sqlite3_snapshot **ppSnapshot
-);
-
-/*
-** CAPI3REF: Start a read transaction on an historical snapshot
-** EXPERIMENTAL
-**
-** ^The [sqlite3_snapshot_open(D,S,P)] interface starts a
-** read transaction for schema S of
-** [database connection] D such that the read transaction
-** refers to historical [snapshot] P, rather than the most
-** recent change to the database.
-** ^The [sqlite3_snapshot_open()] interface returns SQLITE_OK on success
-** or an appropriate [error code] if it fails.
-**
-** ^In order to succeed, a call to [sqlite3_snapshot_open(D,S,P)] must be
-** the first operation following the [BEGIN] that takes the schema S
-** out of [autocommit mode].
-** ^In other words, schema S must not currently be in
-** a transaction for [sqlite3_snapshot_open(D,S,P)] to work, but the
-** database connection D must be out of [autocommit mode].
-** ^A [snapshot] will fail to open if it has been overwritten by a
-** [checkpoint].
-** ^(A call to [sqlite3_snapshot_open(D,S,P)] will fail if the
-** database connection D does not know that the database file for
-** schema S is in [WAL mode]. A database connection might not know
-** that the database file is in [WAL mode] if there has been no prior
-** I/O on that database connection, or if the database entered [WAL mode]
-** after the most recent I/O on the database connection.)^
-** (Hint: Run "[PRAGMA application_id]" against a newly opened
-** database connection in order to make it ready to use snapshots.)
-**
-** The [sqlite3_snapshot_open()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
-*/
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_open(
- sqlite3 *db,
- const char *zSchema,
- sqlite3_snapshot *pSnapshot
-);
-
-/*
-** CAPI3REF: Destroy a snapshot
-** EXPERIMENTAL
-**
-** ^The [sqlite3_snapshot_free(P)] interface destroys [sqlite3_snapshot] P.
-** The application must eventually free every [sqlite3_snapshot] object
-** using this routine to avoid a memory leak.
-**
-** The [sqlite3_snapshot_free()] interface is only available when the
-** SQLITE_ENABLE_SNAPSHOT compile-time option is used.
-*/
-SQLITE_API SQLITE_EXPERIMENTAL void SQLITE_STDCALL sqlite3_snapshot_free(sqlite3_snapshot*);
-
-/*
-** CAPI3REF: Compare the ages of two snapshot handles.
-** EXPERIMENTAL
-**
-** The sqlite3_snapshot_cmp(P1, P2) interface is used to compare the ages
-** of two valid snapshot handles.
-**
-** If the two snapshot handles are not associated with the same database
-** file, the result of the comparison is undefined.
-**
-** Additionally, the result of the comparison is only valid if both of the
-** snapshot handles were obtained by calling sqlite3_snapshot_get() since the
-** last time the wal file was deleted. The wal file is deleted when the
-** database is changed back to rollback mode or when the number of database
-** clients drops to zero. If either snapshot handle was obtained before the
-** wal file was last deleted, the value returned by this function
-** is undefined.
-**
-** Otherwise, this API returns a negative value if P1 refers to an older
-** snapshot than P2, zero if the two handles refer to the same database
-** snapshot, and a positive value if P1 is a newer snapshot than P2.
-*/
-SQLITE_API SQLITE_EXPERIMENTAL int SQLITE_STDCALL sqlite3_snapshot_cmp(
- sqlite3_snapshot *p1,
- sqlite3_snapshot *p2
-);
-
-/*
-** Undo the hack that converts floating point types to integer for
-** builds on processors without floating point support.
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# undef double
-#endif
-
-#if 0
-} /* End of the 'extern "C"' block */
-#endif
-#endif /* _SQLITE3_H_ */
-
-/******** Begin file sqlite3rtree.h *********/
-/*
-** 2010 August 30
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-*/
-
-#ifndef _SQLITE3RTREE_H_
-#define _SQLITE3RTREE_H_
-
-
-#if 0
-extern "C" {
-#endif
-
-typedef struct sqlite3_rtree_geometry sqlite3_rtree_geometry;
-typedef struct sqlite3_rtree_query_info sqlite3_rtree_query_info;
-
-/* The double-precision datatype used by RTree depends on the
-** SQLITE_RTREE_INT_ONLY compile-time option.
-*/
-#ifdef SQLITE_RTREE_INT_ONLY
- typedef sqlite3_int64 sqlite3_rtree_dbl;
-#else
- typedef double sqlite3_rtree_dbl;
-#endif
-
-/*
-** Register a geometry callback named zGeom that can be used as part of an
-** R-Tree geometry query as follows:
-**
-** SELECT ... FROM WHERE MATCH $zGeom(... params ...)
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_geometry_callback(
- sqlite3 *db,
- const char *zGeom,
- int (*xGeom)(sqlite3_rtree_geometry*, int, sqlite3_rtree_dbl*,int*),
- void *pContext
-);
-
-
-/*
-** A pointer to a structure of the following type is passed as the first
-** argument to callbacks registered using rtree_geometry_callback().
-*/
-struct sqlite3_rtree_geometry {
- void *pContext; /* Copy of pContext passed to s_r_g_c() */
- int nParam; /* Size of array aParam[] */
- sqlite3_rtree_dbl *aParam; /* Parameters passed to SQL geom function */
- void *pUser; /* Callback implementation user data */
- void (*xDelUser)(void *); /* Called by SQLite to clean up pUser */
-};
-
-/*
-** Register a 2nd-generation geometry callback named zScore that can be
-** used as part of an R-Tree geometry query as follows:
-**
-** SELECT ... FROM WHERE MATCH $zQueryFunc(... params ...)
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_rtree_query_callback(
- sqlite3 *db,
- const char *zQueryFunc,
- int (*xQueryFunc)(sqlite3_rtree_query_info*),
- void *pContext,
- void (*xDestructor)(void*)
-);
-
-
-/*
-** A pointer to a structure of the following type is passed as the
-** argument to scored geometry callback registered using
-** sqlite3_rtree_query_callback().
-**
-** Note that the first 5 fields of this structure are identical to
-** sqlite3_rtree_geometry. This structure is a subclass of
-** sqlite3_rtree_geometry.
-*/
-struct sqlite3_rtree_query_info {
- void *pContext; /* pContext from when function registered */
- int nParam; /* Number of function parameters */
- sqlite3_rtree_dbl *aParam; /* value of function parameters */
- void *pUser; /* callback can use this, if desired */
- void (*xDelUser)(void*); /* function to free pUser */
- sqlite3_rtree_dbl *aCoord; /* Coordinates of node or entry to check */
- unsigned int *anQueue; /* Number of pending entries in the queue */
- int nCoord; /* Number of coordinates */
- int iLevel; /* Level of current node or entry */
- int mxLevel; /* The largest iLevel value in the tree */
- sqlite3_int64 iRowid; /* Rowid for current entry */
- sqlite3_rtree_dbl rParentScore; /* Score of parent node */
- int eParentWithin; /* Visibility of parent node */
- int eWithin; /* OUT: Visiblity */
- sqlite3_rtree_dbl rScore; /* OUT: Write the score here */
- /* The following fields are only available in 3.8.11 and later */
- sqlite3_value **apSqlParam; /* Original SQL values of parameters */
-};
-
-/*
-** Allowed values for sqlite3_rtree_query.eWithin and .eParentWithin.
-*/
-#define NOT_WITHIN 0 /* Object completely outside of query region */
-#define PARTLY_WITHIN 1 /* Object partially overlaps query region */
-#define FULLY_WITHIN 2 /* Object fully contained within query region */
-
-
-#if 0
-} /* end of the 'extern "C"' block */
-#endif
-
-#endif /* ifndef _SQLITE3RTREE_H_ */
-
-/******** End of sqlite3rtree.h *********/
-/******** Begin file sqlite3session.h *********/
-
-#if !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION)
-#define __SQLITESESSION_H_ 1
-
-/*
-** Make sure we can call this stuff from C++.
-*/
-#if 0
-extern "C" {
-#endif
-
-
-/*
-** CAPI3REF: Session Object Handle
-*/
-typedef struct sqlite3_session sqlite3_session;
-
-/*
-** CAPI3REF: Changeset Iterator Handle
-*/
-typedef struct sqlite3_changeset_iter sqlite3_changeset_iter;
-
-/*
-** CAPI3REF: Create A New Session Object
-**
-** Create a new session object attached to database handle db. If successful,
-** a pointer to the new object is written to *ppSession and SQLITE_OK is
-** returned. If an error occurs, *ppSession is set to NULL and an SQLite
-** error code (e.g. SQLITE_NOMEM) is returned.
-**
-** It is possible to create multiple session objects attached to a single
-** database handle.
-**
-** Session objects created using this function should be deleted using the
-** [sqlite3session_delete()] function before the database handle that they
-** are attached to is itself closed. If the database handle is closed before
-** the session object is deleted, then the results of calling any session
-** module function, including [sqlite3session_delete()] on the session object
-** are undefined.
-**
-** Because the session module uses the [sqlite3_preupdate_hook()] API, it
-** is not possible for an application to register a pre-update hook on a
-** database handle that has one or more session objects attached. Nor is
-** it possible to create a session object attached to a database handle for
-** which a pre-update hook is already defined. The results of attempting
-** either of these things are undefined.
-**
-** The session object will be used to create changesets for tables in
-** database zDb, where zDb is either "main", or "temp", or the name of an
-** attached database. It is not an error if database zDb is not attached
-** to the database when the session object is created.
-*/
-int sqlite3session_create(
- sqlite3 *db, /* Database handle */
- const char *zDb, /* Name of db (e.g. "main") */
- sqlite3_session **ppSession /* OUT: New session object */
-);
-
-/*
-** CAPI3REF: Delete A Session Object
-**
-** Delete a session object previously allocated using
-** [sqlite3session_create()]. Once a session object has been deleted, the
-** results of attempting to use pSession with any other session module
-** function are undefined.
-**
-** Session objects must be deleted before the database handle to which they
-** are attached is closed. Refer to the documentation for
-** [sqlite3session_create()] for details.
-*/
-void sqlite3session_delete(sqlite3_session *pSession);
-
-
-/*
-** CAPI3REF: Enable Or Disable A Session Object
-**
-** Enable or disable the recording of changes by a session object. When
-** enabled, a session object records changes made to the database. When
-** disabled - it does not. A newly created session object is enabled.
-** Refer to the documentation for [sqlite3session_changeset()] for further
-** details regarding how enabling and disabling a session object affects
-** the eventual changesets.
-**
-** Passing zero to this function disables the session. Passing a value
-** greater than zero enables it. Passing a value less than zero is a
-** no-op, and may be used to query the current state of the session.
-**
-** The return value indicates the final state of the session object: 0 if
-** the session is disabled, or 1 if it is enabled.
-*/
-int sqlite3session_enable(sqlite3_session *pSession, int bEnable);
-
-/*
-** CAPI3REF: Set Or Clear the Indirect Change Flag
-**
-** Each change recorded by a session object is marked as either direct or
-** indirect. A change is marked as indirect if either:
-**
-**
-** - The session object "indirect" flag is set when the change is
-** made, or
-**
- The change is made by an SQL trigger or foreign key action
-** instead of directly as a result of a users SQL statement.
-**
-**
-** If a single row is affected by more than one operation within a session,
-** then the change is considered indirect if all operations meet the criteria
-** for an indirect change above, or direct otherwise.
-**
-** This function is used to set, clear or query the session object indirect
-** flag. If the second argument passed to this function is zero, then the
-** indirect flag is cleared. If it is greater than zero, the indirect flag
-** is set. Passing a value less than zero does not modify the current value
-** of the indirect flag, and may be used to query the current state of the
-** indirect flag for the specified session object.
-**
-** The return value indicates the final state of the indirect flag: 0 if
-** it is clear, or 1 if it is set.
-*/
-int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect);
-
-/*
-** CAPI3REF: Attach A Table To A Session Object
-**
-** If argument zTab is not NULL, then it is the name of a table to attach
-** to the session object passed as the first argument. All subsequent changes
-** made to the table while the session object is enabled will be recorded. See
-** documentation for [sqlite3session_changeset()] for further details.
-**
-** Or, if argument zTab is NULL, then changes are recorded for all tables
-** in the database. If additional tables are added to the database (by
-** executing "CREATE TABLE" statements) after this call is made, changes for
-** the new tables are also recorded.
-**
-** Changes can only be recorded for tables that have a PRIMARY KEY explicitly
-** defined as part of their CREATE TABLE statement. It does not matter if the
-** PRIMARY KEY is an "INTEGER PRIMARY KEY" (rowid alias) or not. The PRIMARY
-** KEY may consist of a single column, or may be a composite key.
-**
-** It is not an error if the named table does not exist in the database. Nor
-** is it an error if the named table does not have a PRIMARY KEY. However,
-** no changes will be recorded in either of these scenarios.
-**
-** Changes are not recorded for individual rows that have NULL values stored
-** in one or more of their PRIMARY KEY columns.
-**
-** SQLITE_OK is returned if the call completes without error. Or, if an error
-** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned.
-*/
-int sqlite3session_attach(
- sqlite3_session *pSession, /* Session object */
- const char *zTab /* Table name */
-);
-
-/*
-** CAPI3REF: Set a table filter on a Session Object.
-**
-** The second argument (xFilter) is the "filter callback". For changes to rows
-** in tables that are not attached to the Session oject, the filter is called
-** to determine whether changes to the table's rows should be tracked or not.
-** If xFilter returns 0, changes is not tracked. Note that once a table is
-** attached, xFilter will not be called again.
-*/
-void sqlite3session_table_filter(
- sqlite3_session *pSession, /* Session object */
- int(*xFilter)(
- void *pCtx, /* Copy of third arg to _filter_table() */
- const char *zTab /* Table name */
- ),
- void *pCtx /* First argument passed to xFilter */
-);
-
-/*
-** CAPI3REF: Generate A Changeset From A Session Object
-**
-** Obtain a changeset containing changes to the tables attached to the
-** session object passed as the first argument. If successful,
-** set *ppChangeset to point to a buffer containing the changeset
-** and *pnChangeset to the size of the changeset in bytes before returning
-** SQLITE_OK. If an error occurs, set both *ppChangeset and *pnChangeset to
-** zero and return an SQLite error code.
-**
-** A changeset consists of zero or more INSERT, UPDATE and/or DELETE changes,
-** each representing a change to a single row of an attached table. An INSERT
-** change contains the values of each field of a new database row. A DELETE
-** contains the original values of each field of a deleted database row. An
-** UPDATE change contains the original values of each field of an updated
-** database row along with the updated values for each updated non-primary-key
-** column. It is not possible for an UPDATE change to represent a change that
-** modifies the values of primary key columns. If such a change is made, it
-** is represented in a changeset as a DELETE followed by an INSERT.
-**
-** Changes are not recorded for rows that have NULL values stored in one or
-** more of their PRIMARY KEY columns. If such a row is inserted or deleted,
-** no corresponding change is present in the changesets returned by this
-** function. If an existing row with one or more NULL values stored in
-** PRIMARY KEY columns is updated so that all PRIMARY KEY columns are non-NULL,
-** only an INSERT is appears in the changeset. Similarly, if an existing row
-** with non-NULL PRIMARY KEY values is updated so that one or more of its
-** PRIMARY KEY columns are set to NULL, the resulting changeset contains a
-** DELETE change only.
-**
-** The contents of a changeset may be traversed using an iterator created
-** using the [sqlite3changeset_start()] API. A changeset may be applied to
-** a database with a compatible schema using the [sqlite3changeset_apply()]
-** API.
-**
-** Within a changeset generated by this function, all changes related to a
-** single table are grouped together. In other words, when iterating through
-** a changeset or when applying a changeset to a database, all changes related
-** to a single table are processed before moving on to the next table. Tables
-** are sorted in the same order in which they were attached (or auto-attached)
-** to the sqlite3_session object. The order in which the changes related to
-** a single table are stored is undefined.
-**
-** Following a successful call to this function, it is the responsibility of
-** the caller to eventually free the buffer that *ppChangeset points to using
-** [sqlite3_free()].
-**
-** Changeset Generation
-**
-** Once a table has been attached to a session object, the session object
-** records the primary key values of all new rows inserted into the table.
-** It also records the original primary key and other column values of any
-** deleted or updated rows. For each unique primary key value, data is only
-** recorded once - the first time a row with said primary key is inserted,
-** updated or deleted in the lifetime of the session.
-**
-** There is one exception to the previous paragraph: when a row is inserted,
-** updated or deleted, if one or more of its primary key columns contain a
-** NULL value, no record of the change is made.
-**
-** The session object therefore accumulates two types of records - those
-** that consist of primary key values only (created when the user inserts
-** a new record) and those that consist of the primary key values and the
-** original values of other table columns (created when the users deletes
-** or updates a record).
-**
-** When this function is called, the requested changeset is created using
-** both the accumulated records and the current contents of the database
-** file. Specifically:
-**
-**
-** - For each record generated by an insert, the database is queried
-** for a row with a matching primary key. If one is found, an INSERT
-** change is added to the changeset. If no such row is found, no change
-** is added to the changeset.
-**
-**
- For each record generated by an update or delete, the database is
-** queried for a row with a matching primary key. If such a row is
-** found and one or more of the non-primary key fields have been
-** modified from their original values, an UPDATE change is added to
-** the changeset. Or, if no such row is found in the table, a DELETE
-** change is added to the changeset. If there is a row with a matching
-** primary key in the database, but all fields contain their original
-** values, no change is added to the changeset.
-**
-**
-** This means, amongst other things, that if a row is inserted and then later
-** deleted while a session object is active, neither the insert nor the delete
-** will be present in the changeset. Or if a row is deleted and then later a
-** row with the same primary key values inserted while a session object is
-** active, the resulting changeset will contain an UPDATE change instead of
-** a DELETE and an INSERT.
-**
-** When a session object is disabled (see the [sqlite3session_enable()] API),
-** it does not accumulate records when rows are inserted, updated or deleted.
-** This may appear to have some counter-intuitive effects if a single row
-** is written to more than once during a session. For example, if a row
-** is inserted while a session object is enabled, then later deleted while
-** the same session object is disabled, no INSERT record will appear in the
-** changeset, even though the delete took place while the session was disabled.
-** Or, if one field of a row is updated while a session is disabled, and
-** another field of the same row is updated while the session is enabled, the
-** resulting changeset will contain an UPDATE change that updates both fields.
-*/
-int sqlite3session_changeset(
- sqlite3_session *pSession, /* Session object */
- int *pnChangeset, /* OUT: Size of buffer at *ppChangeset */
- void **ppChangeset /* OUT: Buffer containing changeset */
-);
-
-/*
-** CAPI3REF: Load The Difference Between Tables Into A Session
-**
-** If it is not already attached to the session object passed as the first
-** argument, this function attaches table zTbl in the same manner as the
-** [sqlite3session_attach()] function. If zTbl does not exist, or if it
-** does not have a primary key, this function is a no-op (but does not return
-** an error).
-**
-** Argument zFromDb must be the name of a database ("main", "temp" etc.)
-** attached to the same database handle as the session object that contains
-** a table compatible with the table attached to the session by this function.
-** A table is considered compatible if it:
-**
-**
-** - Has the same name,
-**
- Has the same set of columns declared in the same order, and
-**
- Has the same PRIMARY KEY definition.
-**
-**
-** If the tables are not compatible, SQLITE_SCHEMA is returned. If the tables
-** are compatible but do not have any PRIMARY KEY columns, it is not an error
-** but no changes are added to the session object. As with other session
-** APIs, tables without PRIMARY KEYs are simply ignored.
-**
-** This function adds a set of changes to the session object that could be
-** used to update the table in database zFrom (call this the "from-table")
-** so that its content is the same as the table attached to the session
-** object (call this the "to-table"). Specifically:
-**
-**
-** - For each row (primary key) that exists in the to-table but not in
-** the from-table, an INSERT record is added to the session object.
-**
-**
- For each row (primary key) that exists in the to-table but not in
-** the from-table, a DELETE record is added to the session object.
-**
-**
- For each row (primary key) that exists in both tables, but features
-** different in each, an UPDATE record is added to the session.
-**
-**
-** To clarify, if this function is called and then a changeset constructed
-** using [sqlite3session_changeset()], then after applying that changeset to
-** database zFrom the contents of the two compatible tables would be
-** identical.
-**
-** It an error if database zFrom does not exist or does not contain the
-** required compatible table.
-**
-** If the operation successful, SQLITE_OK is returned. Otherwise, an SQLite
-** error code. In this case, if argument pzErrMsg is not NULL, *pzErrMsg
-** may be set to point to a buffer containing an English language error
-** message. It is the responsibility of the caller to free this buffer using
-** sqlite3_free().
-*/
-int sqlite3session_diff(
- sqlite3_session *pSession,
- const char *zFromDb,
- const char *zTbl,
- char **pzErrMsg
-);
-
-
-/*
-** CAPI3REF: Generate A Patchset From A Session Object
-**
-** The differences between a patchset and a changeset are that:
-**
-**
-** - DELETE records consist of the primary key fields only. The
-** original values of other fields are omitted.
-**
- The original values of any modified fields are omitted from
-** UPDATE records.
-**
-**
-** A patchset blob may be used with up to date versions of all
-** sqlite3changeset_xxx API functions except for sqlite3changeset_invert(),
-** which returns SQLITE_CORRUPT if it is passed a patchset. Similarly,
-** attempting to use a patchset blob with old versions of the
-** sqlite3changeset_xxx APIs also provokes an SQLITE_CORRUPT error.
-**
-** Because the non-primary key "old.*" fields are omitted, no
-** SQLITE_CHANGESET_DATA conflicts can be detected or reported if a patchset
-** is passed to the sqlite3changeset_apply() API. Other conflict types work
-** in the same way as for changesets.
-**
-** Changes within a patchset are ordered in the same way as for changesets
-** generated by the sqlite3session_changeset() function (i.e. all changes for
-** a single table are grouped together, tables appear in the order in which
-** they were attached to the session object).
-*/
-int sqlite3session_patchset(
- sqlite3_session *pSession, /* Session object */
- int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */
- void **ppPatchset /* OUT: Buffer containing changeset */
-);
-
-/*
-** CAPI3REF: Test if a changeset has recorded any changes.
-**
-** Return non-zero if no changes to attached tables have been recorded by
-** the session object passed as the first argument. Otherwise, if one or
-** more changes have been recorded, return zero.
-**
-** Even if this function returns zero, it is possible that calling
-** [sqlite3session_changeset()] on the session handle may still return a
-** changeset that contains no changes. This can happen when a row in
-** an attached table is modified and then later on the original values
-** are restored. However, if this function returns non-zero, then it is
-** guaranteed that a call to sqlite3session_changeset() will return a
-** changeset containing zero changes.
-*/
-int sqlite3session_isempty(sqlite3_session *pSession);
-
-/*
-** CAPI3REF: Create An Iterator To Traverse A Changeset
-**
-** Create an iterator used to iterate through the contents of a changeset.
-** If successful, *pp is set to point to the iterator handle and SQLITE_OK
-** is returned. Otherwise, if an error occurs, *pp is set to zero and an
-** SQLite error code is returned.
-**
-** The following functions can be used to advance and query a changeset
-** iterator created by this function:
-**
-**
-** - [sqlite3changeset_next()]
-**
- [sqlite3changeset_op()]
-**
- [sqlite3changeset_new()]
-**
- [sqlite3changeset_old()]
-**
-**
-** It is the responsibility of the caller to eventually destroy the iterator
-** by passing it to [sqlite3changeset_finalize()]. The buffer containing the
-** changeset (pChangeset) must remain valid until after the iterator is
-** destroyed.
-**
-** Assuming the changeset blob was created by one of the
-** [sqlite3session_changeset()], [sqlite3changeset_concat()] or
-** [sqlite3changeset_invert()] functions, all changes within the changeset
-** that apply to a single table are grouped together. This means that when
-** an application iterates through a changeset using an iterator created by
-** this function, all changes that relate to a single table are visted
-** consecutively. There is no chance that the iterator will visit a change
-** the applies to table X, then one for table Y, and then later on visit
-** another change for table X.
-*/
-int sqlite3changeset_start(
- sqlite3_changeset_iter **pp, /* OUT: New changeset iterator handle */
- int nChangeset, /* Size of changeset blob in bytes */
- void *pChangeset /* Pointer to blob containing changeset */
-);
-
-
-/*
-** CAPI3REF: Advance A Changeset Iterator
-**
-** This function may only be used with iterators created by function
-** [sqlite3changeset_start()]. If it is called on an iterator passed to
-** a conflict-handler callback by [sqlite3changeset_apply()], SQLITE_MISUSE
-** is returned and the call has no effect.
-**
-** Immediately after an iterator is created by sqlite3changeset_start(), it
-** does not point to any change in the changeset. Assuming the changeset
-** is not empty, the first call to this function advances the iterator to
-** point to the first change in the changeset. Each subsequent call advances
-** the iterator to point to the next change in the changeset (if any). If
-** no error occurs and the iterator points to a valid change after a call
-** to sqlite3changeset_next() has advanced it, SQLITE_ROW is returned.
-** Otherwise, if all changes in the changeset have already been visited,
-** SQLITE_DONE is returned.
-**
-** If an error occurs, an SQLite error code is returned. Possible error
-** codes include SQLITE_CORRUPT (if the changeset buffer is corrupt) or
-** SQLITE_NOMEM.
-*/
-int sqlite3changeset_next(sqlite3_changeset_iter *pIter);
-
-/*
-** CAPI3REF: Obtain The Current Operation From A Changeset Iterator
-**
-** The pIter argument passed to this function may either be an iterator
-** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
-** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned [SQLITE_ROW]. If this
-** is not the case, this function returns [SQLITE_MISUSE].
-**
-** If argument pzTab is not NULL, then *pzTab is set to point to a
-** nul-terminated utf-8 encoded string containing the name of the table
-** affected by the current change. The buffer remains valid until either
-** sqlite3changeset_next() is called on the iterator or until the
-** conflict-handler function returns. If pnCol is not NULL, then *pnCol is
-** set to the number of columns in the table affected by the change. If
-** pbIncorrect is not NULL, then *pbIndirect is set to true (1) if the change
-** is an indirect change, or false (0) otherwise. See the documentation for
-** [sqlite3session_indirect()] for a description of direct and indirect
-** changes. Finally, if pOp is not NULL, then *pOp is set to one of
-** [SQLITE_INSERT], [SQLITE_DELETE] or [SQLITE_UPDATE], depending on the
-** type of change that the iterator currently points to.
-**
-** If no error occurs, SQLITE_OK is returned. If an error does occur, an
-** SQLite error code is returned. The values of the output variables may not
-** be trusted in this case.
-*/
-int sqlite3changeset_op(
- sqlite3_changeset_iter *pIter, /* Iterator object */
- const char **pzTab, /* OUT: Pointer to table name */
- int *pnCol, /* OUT: Number of columns in table */
- int *pOp, /* OUT: SQLITE_INSERT, DELETE or UPDATE */
- int *pbIndirect /* OUT: True for an 'indirect' change */
-);
-
-/*
-** CAPI3REF: Obtain The Primary Key Definition Of A Table
-**
-** For each modified table, a changeset includes the following:
-**
-**
-** - The number of columns in the table, and
-**
- Which of those columns make up the tables PRIMARY KEY.
-**
-**
-** This function is used to find which columns comprise the PRIMARY KEY of
-** the table modified by the change that iterator pIter currently points to.
-** If successful, *pabPK is set to point to an array of nCol entries, where
-** nCol is the number of columns in the table. Elements of *pabPK are set to
-** 0x01 if the corresponding column is part of the tables primary key, or
-** 0x00 if it is not.
-**
-** If argumet pnCol is not NULL, then *pnCol is set to the number of columns
-** in the table.
-**
-** If this function is called when the iterator does not point to a valid
-** entry, SQLITE_MISUSE is returned and the output variables zeroed. Otherwise,
-** SQLITE_OK is returned and the output variables populated as described
-** above.
-*/
-int sqlite3changeset_pk(
- sqlite3_changeset_iter *pIter, /* Iterator object */
- unsigned char **pabPK, /* OUT: Array of boolean - true for PK cols */
- int *pnCol /* OUT: Number of entries in output array */
-);
-
-/*
-** CAPI3REF: Obtain old.* Values From A Changeset Iterator
-**
-** The pIter argument passed to this function may either be an iterator
-** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
-** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
-** Furthermore, it may only be called if the type of change that the iterator
-** currently points to is either [SQLITE_DELETE] or [SQLITE_UPDATE]. Otherwise,
-** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
-**
-** Argument iVal must be greater than or equal to 0, and less than the number
-** of columns in the table affected by the current change. Otherwise,
-** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
-**
-** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
-** original row values stored as part of the UPDATE or DELETE change and
-** returns SQLITE_OK. The name of the function comes from the fact that this
-** is similar to the "old.*" columns available to update or delete triggers.
-**
-** If some other error occurs (e.g. an OOM condition), an SQLite error code
-** is returned and *ppValue is set to NULL.
-*/
-int sqlite3changeset_old(
- sqlite3_changeset_iter *pIter, /* Changeset iterator */
- int iVal, /* Column number */
- sqlite3_value **ppValue /* OUT: Old value (or NULL pointer) */
-);
-
-/*
-** CAPI3REF: Obtain new.* Values From A Changeset Iterator
-**
-** The pIter argument passed to this function may either be an iterator
-** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator
-** created by [sqlite3changeset_start()]. In the latter case, the most recent
-** call to [sqlite3changeset_next()] must have returned SQLITE_ROW.
-** Furthermore, it may only be called if the type of change that the iterator
-** currently points to is either [SQLITE_UPDATE] or [SQLITE_INSERT]. Otherwise,
-** this function returns [SQLITE_MISUSE] and sets *ppValue to NULL.
-**
-** Argument iVal must be greater than or equal to 0, and less than the number
-** of columns in the table affected by the current change. Otherwise,
-** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
-**
-** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the vector of
-** new row values stored as part of the UPDATE or INSERT change and
-** returns SQLITE_OK. If the change is an UPDATE and does not include
-** a new value for the requested column, *ppValue is set to NULL and
-** SQLITE_OK returned. The name of the function comes from the fact that
-** this is similar to the "new.*" columns available to update or delete
-** triggers.
-**
-** If some other error occurs (e.g. an OOM condition), an SQLite error code
-** is returned and *ppValue is set to NULL.
-*/
-int sqlite3changeset_new(
- sqlite3_changeset_iter *pIter, /* Changeset iterator */
- int iVal, /* Column number */
- sqlite3_value **ppValue /* OUT: New value (or NULL pointer) */
-);
-
-/*
-** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator
-**
-** This function should only be used with iterator objects passed to a
-** conflict-handler callback by [sqlite3changeset_apply()] with either
-** [SQLITE_CHANGESET_DATA] or [SQLITE_CHANGESET_CONFLICT]. If this function
-** is called on any other iterator, [SQLITE_MISUSE] is returned and *ppValue
-** is set to NULL.
-**
-** Argument iVal must be greater than or equal to 0, and less than the number
-** of columns in the table affected by the current change. Otherwise,
-** [SQLITE_RANGE] is returned and *ppValue is set to NULL.
-**
-** If successful, this function sets *ppValue to point to a protected
-** sqlite3_value object containing the iVal'th value from the
-** "conflicting row" associated with the current conflict-handler callback
-** and returns SQLITE_OK.
-**
-** If some other error occurs (e.g. an OOM condition), an SQLite error code
-** is returned and *ppValue is set to NULL.
-*/
-int sqlite3changeset_conflict(
- sqlite3_changeset_iter *pIter, /* Changeset iterator */
- int iVal, /* Column number */
- sqlite3_value **ppValue /* OUT: Value from conflicting row */
-);
-
-/*
-** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations
-**
-** This function may only be called with an iterator passed to an
-** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case
-** it sets the output variable to the total number of known foreign key
-** violations in the destination database and returns SQLITE_OK.
-**
-** In all other cases this function returns SQLITE_MISUSE.
-*/
-int sqlite3changeset_fk_conflicts(
- sqlite3_changeset_iter *pIter, /* Changeset iterator */
- int *pnOut /* OUT: Number of FK violations */
-);
-
-
-/*
-** CAPI3REF: Finalize A Changeset Iterator
-**
-** This function is used to finalize an iterator allocated with
-** [sqlite3changeset_start()].
-**
-** This function should only be called on iterators created using the
-** [sqlite3changeset_start()] function. If an application calls this
-** function with an iterator passed to a conflict-handler by
-** [sqlite3changeset_apply()], [SQLITE_MISUSE] is immediately returned and the
-** call has no effect.
-**
-** If an error was encountered within a call to an sqlite3changeset_xxx()
-** function (for example an [SQLITE_CORRUPT] in [sqlite3changeset_next()] or an
-** [SQLITE_NOMEM] in [sqlite3changeset_new()]) then an error code corresponding
-** to that error is returned by this function. Otherwise, SQLITE_OK is
-** returned. This is to allow the following pattern (pseudo-code):
-**
-** sqlite3changeset_start();
-** while( SQLITE_ROW==sqlite3changeset_next() ){
-** // Do something with change.
-** }
-** rc = sqlite3changeset_finalize();
-** if( rc!=SQLITE_OK ){
-** // An error has occurred
-** }
-*/
-int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter);
-
-/*
-** CAPI3REF: Invert A Changeset
-**
-** This function is used to "invert" a changeset object. Applying an inverted
-** changeset to a database reverses the effects of applying the uninverted
-** changeset. Specifically:
-**
-**
-** - Each DELETE change is changed to an INSERT, and
-**
- Each INSERT change is changed to a DELETE, and
-**
- For each UPDATE change, the old.* and new.* values are exchanged.
-**
-**
-** This function does not change the order in which changes appear within
-** the changeset. It merely reverses the sense of each individual change.
-**
-** If successful, a pointer to a buffer containing the inverted changeset
-** is stored in *ppOut, the size of the same buffer is stored in *pnOut, and
-** SQLITE_OK is returned. If an error occurs, both *pnOut and *ppOut are
-** zeroed and an SQLite error code returned.
-**
-** It is the responsibility of the caller to eventually call sqlite3_free()
-** on the *ppOut pointer to free the buffer allocation following a successful
-** call to this function.
-**
-** WARNING/TODO: This function currently assumes that the input is a valid
-** changeset. If it is not, the results are undefined.
-*/
-int sqlite3changeset_invert(
- int nIn, const void *pIn, /* Input changeset */
- int *pnOut, void **ppOut /* OUT: Inverse of input */
-);
-
-/*
-** CAPI3REF: Concatenate Two Changeset Objects
-**
-** This function is used to concatenate two changesets, A and B, into a
-** single changeset. The result is a changeset equivalent to applying
-** changeset A followed by changeset B.
-**
-** This function combines the two input changesets using an
-** sqlite3_changegroup object. Calling it produces similar results as the
-** following code fragment:
-**
-** sqlite3_changegroup *pGrp;
-** rc = sqlite3_changegroup_new(&pGrp);
-** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA);
-** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nB, pB);
-** if( rc==SQLITE_OK ){
-** rc = sqlite3changegroup_output(pGrp, pnOut, ppOut);
-** }else{
-** *ppOut = 0;
-** *pnOut = 0;
-** }
-**
-** Refer to the sqlite3_changegroup documentation below for details.
-*/
-int sqlite3changeset_concat(
- int nA, /* Number of bytes in buffer pA */
- void *pA, /* Pointer to buffer containing changeset A */
- int nB, /* Number of bytes in buffer pB */
- void *pB, /* Pointer to buffer containing changeset B */
- int *pnOut, /* OUT: Number of bytes in output changeset */
- void **ppOut /* OUT: Buffer containing output changeset */
-);
-
-
-/*
-** Changegroup handle.
-*/
-typedef struct sqlite3_changegroup sqlite3_changegroup;
-
-/*
-** CAPI3REF: Combine two or more changesets into a single changeset.
-**
-** An sqlite3_changegroup object is used to combine two or more changesets
-** (or patchsets) into a single changeset (or patchset). A single changegroup
-** object may combine changesets or patchsets, but not both. The output is
-** always in the same format as the input.
-**
-** If successful, this function returns SQLITE_OK and populates (*pp) with
-** a pointer to a new sqlite3_changegroup object before returning. The caller
-** should eventually free the returned object using a call to
-** sqlite3changegroup_delete(). If an error occurs, an SQLite error code
-** (i.e. SQLITE_NOMEM) is returned and *pp is set to NULL.
-**
-** The usual usage pattern for an sqlite3_changegroup object is as follows:
-**
-**
-** - It is created using a call to sqlite3changegroup_new().
-**
-**
- Zero or more changesets (or patchsets) are added to the object
-** by calling sqlite3changegroup_add().
-**
-**
- The result of combining all input changesets together is obtained
-** by the application via a call to sqlite3changegroup_output().
-**
-**
- The object is deleted using a call to sqlite3changegroup_delete().
-**
-**
-** Any number of calls to add() and output() may be made between the calls to
-** new() and delete(), and in any order.
-**
-** As well as the regular sqlite3changegroup_add() and
-** sqlite3changegroup_output() functions, also available are the streaming
-** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm().
-*/
-int sqlite3changegroup_new(sqlite3_changegroup **pp);
-
-/*
-** Add all changes within the changeset (or patchset) in buffer pData (size
-** nData bytes) to the changegroup.
-**
-** If the buffer contains a patchset, then all prior calls to this function
-** on the same changegroup object must also have specified patchsets. Or, if
-** the buffer contains a changeset, so must have the earlier calls to this
-** function. Otherwise, SQLITE_ERROR is returned and no changes are added
-** to the changegroup.
-**
-** Rows within the changeset and changegroup are identified by the values in
-** their PRIMARY KEY columns. A change in the changeset is considered to
-** apply to the same row as a change already present in the changegroup if
-** the two rows have the same primary key.
-**
-** Changes to rows that that do not already appear in the changegroup are
-** simply copied into it. Or, if both the new changeset and the changegroup
-** contain changes that apply to a single row, the final contents of the
-** changegroup depends on the type of each change, as follows:
-**
-**
-** | Existing Change |
-** New Change |
-** Output Change
-** |
|---|
| INSERT | INSERT |
-** The new change is ignored. This case does not occur if the new
-** changeset was recorded immediately after the changesets already
-** added to the changegroup.
-** |
| INSERT | UPDATE |
-** The INSERT change remains in the changegroup. The values in the
-** INSERT change are modified as if the row was inserted by the
-** existing change and then updated according to the new change.
-** |
| INSERT | DELETE |
-** The existing INSERT is removed from the changegroup. The DELETE is
-** not added.
-** |
| UPDATE | INSERT |
-** The new change is ignored. This case does not occur if the new
-** changeset was recorded immediately after the changesets already
-** added to the changegroup.
-** |
| UPDATE | UPDATE |
-** The existing UPDATE remains within the changegroup. It is amended
-** so that the accompanying values are as if the row was updated once
-** by the existing change and then again by the new change.
-** |
| UPDATE | DELETE |
-** The existing UPDATE is replaced by the new DELETE within the
-** changegroup.
-** |
| DELETE | INSERT |
-** If one or more of the column values in the row inserted by the
-** new change differ from those in the row deleted by the existing
-** change, the existing DELETE is replaced by an UPDATE within the
-** changegroup. Otherwise, if the inserted row is exactly the same
-** as the deleted row, the existing DELETE is simply discarded.
-** |
| DELETE | UPDATE |
-** The new change is ignored. This case does not occur if the new
-** changeset was recorded immediately after the changesets already
-** added to the changegroup.
-** |
| DELETE | DELETE |
-** The new change is ignored. This case does not occur if the new
-** changeset was recorded immediately after the changesets already
-** added to the changegroup.
-** |
-**
-** If the new changeset contains changes to a table that is already present
-** in the changegroup, then the number of columns and the position of the
-** primary key columns for the table must be consistent. If this is not the
-** case, this function fails with SQLITE_SCHEMA. If the input changeset
-** appears to be corrupt and the corruption is detected, SQLITE_CORRUPT is
-** returned. Or, if an out-of-memory condition occurs during processing, this
-** function returns SQLITE_NOMEM. In all cases, if an error occurs the
-** final contents of the changegroup is undefined.
-**
-** If no error occurs, SQLITE_OK is returned.
-*/
-int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData);
-
-/*
-** Obtain a buffer containing a changeset (or patchset) representing the
-** current contents of the changegroup. If the inputs to the changegroup
-** were themselves changesets, the output is a changeset. Or, if the
-** inputs were patchsets, the output is also a patchset.
-**
-** As with the output of the sqlite3session_changeset() and
-** sqlite3session_patchset() functions, all changes related to a single
-** table are grouped together in the output of this function. Tables appear
-** in the same order as for the very first changeset added to the changegroup.
-** If the second or subsequent changesets added to the changegroup contain
-** changes for tables that do not appear in the first changeset, they are
-** appended onto the end of the output changeset, again in the order in
-** which they are first encountered.
-**
-** If an error occurs, an SQLite error code is returned and the output
-** variables (*pnData) and (*ppData) are set to 0. Otherwise, SQLITE_OK
-** is returned and the output variables are set to the size of and a
-** pointer to the output buffer, respectively. In this case it is the
-** responsibility of the caller to eventually free the buffer using a
-** call to sqlite3_free().
-*/
-int sqlite3changegroup_output(
- sqlite3_changegroup*,
- int *pnData, /* OUT: Size of output buffer in bytes */
- void **ppData /* OUT: Pointer to output buffer */
-);
-
-/*
-** Delete a changegroup object.
-*/
-void sqlite3changegroup_delete(sqlite3_changegroup*);
-
-/*
-** CAPI3REF: Apply A Changeset To A Database
-**
-** Apply a changeset to a database. This function attempts to update the
-** "main" database attached to handle db with the changes found in the
-** changeset passed via the second and third arguments.
-**
-** The fourth argument (xFilter) passed to this function is the "filter
-** callback". If it is not NULL, then for each table affected by at least one
-** change in the changeset, the filter callback is invoked with
-** the table name as the second argument, and a copy of the context pointer
-** passed as the sixth argument to this function as the first. If the "filter
-** callback" returns zero, then no attempt is made to apply any changes to
-** the table. Otherwise, if the return value is non-zero or the xFilter
-** argument to this function is NULL, all changes related to the table are
-** attempted.
-**
-** For each table that is not excluded by the filter callback, this function
-** tests that the target database contains a compatible table. A table is
-** considered compatible if all of the following are true:
-**
-**
-** - The table has the same name as the name recorded in the
-** changeset, and
-**
- The table has the same number of columns as recorded in the
-** changeset, and
-**
- The table has primary key columns in the same position as
-** recorded in the changeset.
-**
-**
-** If there is no compatible table, it is not an error, but none of the
-** changes associated with the table are applied. A warning message is issued
-** via the sqlite3_log() mechanism with the error code SQLITE_SCHEMA. At most
-** one such warning is issued for each table in the changeset.
-**
-** For each change for which there is a compatible table, an attempt is made
-** to modify the table contents according to the UPDATE, INSERT or DELETE
-** change. If a change cannot be applied cleanly, the conflict handler
-** function passed as the fifth argument to sqlite3changeset_apply() may be
-** invoked. A description of exactly when the conflict handler is invoked for
-** each type of change is below.
-**
-** Unlike the xFilter argument, xConflict may not be passed NULL. The results
-** of passing anything other than a valid function pointer as the xConflict
-** argument are undefined.
-**
-** Each time the conflict handler function is invoked, it must return one
-** of [SQLITE_CHANGESET_OMIT], [SQLITE_CHANGESET_ABORT] or
-** [SQLITE_CHANGESET_REPLACE]. SQLITE_CHANGESET_REPLACE may only be returned
-** if the second argument passed to the conflict handler is either
-** SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If the conflict-handler
-** returns an illegal value, any changes already made are rolled back and
-** the call to sqlite3changeset_apply() returns SQLITE_MISUSE. Different
-** actions are taken by sqlite3changeset_apply() depending on the value
-** returned by each invocation of the conflict-handler function. Refer to
-** the documentation for the three
-** [SQLITE_CHANGESET_OMIT|available return values] for details.
-**
-**
-** - DELETE Changes
-
-** For each DELETE change, this function checks if the target database
-** contains a row with the same primary key value (or values) as the
-** original row values stored in the changeset. If it does, and the values
-** stored in all non-primary key columns also match the values stored in
-** the changeset the row is deleted from the target database.
-**
-** If a row with matching primary key values is found, but one or more of
-** the non-primary key fields contains a value different from the original
-** row value stored in the changeset, the conflict-handler function is
-** invoked with [SQLITE_CHANGESET_DATA] as the second argument.
-**
-** If no row with matching primary key values is found in the database,
-** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
-** passed as the second argument.
-**
-** If the DELETE operation is attempted, but SQLite returns SQLITE_CONSTRAINT
-** (which can only happen if a foreign key constraint is violated), the
-** conflict-handler function is invoked with [SQLITE_CHANGESET_CONSTRAINT]
-** passed as the second argument. This includes the case where the DELETE
-** operation is attempted because an earlier call to the conflict handler
-** function returned [SQLITE_CHANGESET_REPLACE].
-**
-**
- INSERT Changes
-
-** For each INSERT change, an attempt is made to insert the new row into
-** the database.
-**
-** If the attempt to insert the row fails because the database already
-** contains a row with the same primary key values, the conflict handler
-** function is invoked with the second argument set to
-** [SQLITE_CHANGESET_CONFLICT].
-**
-** If the attempt to insert the row fails because of some other constraint
-** violation (e.g. NOT NULL or UNIQUE), the conflict handler function is
-** invoked with the second argument set to [SQLITE_CHANGESET_CONSTRAINT].
-** This includes the case where the INSERT operation is re-attempted because
-** an earlier call to the conflict handler function returned
-** [SQLITE_CHANGESET_REPLACE].
-**
-**
- UPDATE Changes
-
-** For each UPDATE change, this function checks if the target database
-** contains a row with the same primary key value (or values) as the
-** original row values stored in the changeset. If it does, and the values
-** stored in all non-primary key columns also match the values stored in
-** the changeset the row is updated within the target database.
-**
-** If a row with matching primary key values is found, but one or more of
-** the non-primary key fields contains a value different from an original
-** row value stored in the changeset, the conflict-handler function is
-** invoked with [SQLITE_CHANGESET_DATA] as the second argument. Since
-** UPDATE changes only contain values for non-primary key fields that are
-** to be modified, only those fields need to match the original values to
-** avoid the SQLITE_CHANGESET_DATA conflict-handler callback.
-**
-** If no row with matching primary key values is found in the database,
-** the conflict-handler function is invoked with [SQLITE_CHANGESET_NOTFOUND]
-** passed as the second argument.
-**
-** If the UPDATE operation is attempted, but SQLite returns
-** SQLITE_CONSTRAINT, the conflict-handler function is invoked with
-** [SQLITE_CHANGESET_CONSTRAINT] passed as the second argument.
-** This includes the case where the UPDATE operation is attempted after
-** an earlier call to the conflict handler function returned
-** [SQLITE_CHANGESET_REPLACE].
-**
-**
-** It is safe to execute SQL statements, including those that write to the
-** table that the callback related to, from within the xConflict callback.
-** This can be used to further customize the applications conflict
-** resolution strategy.
-**
-** All changes made by this function are enclosed in a savepoint transaction.
-** If any other error (aside from a constraint failure when attempting to
-** write to the target database) occurs, then the savepoint transaction is
-** rolled back, restoring the target database to its original state, and an
-** SQLite error code returned.
-*/
-int sqlite3changeset_apply(
- sqlite3 *db, /* Apply change to "main" db of this handle */
- int nChangeset, /* Size of changeset in bytes */
- void *pChangeset, /* Changeset blob */
- int(*xFilter)(
- void *pCtx, /* Copy of sixth arg to _apply() */
- const char *zTab /* Table name */
- ),
- int(*xConflict)(
- void *pCtx, /* Copy of sixth arg to _apply() */
- int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
- sqlite3_changeset_iter *p /* Handle describing change and conflict */
- ),
- void *pCtx /* First argument passed to xConflict */
-);
-
-/*
-** CAPI3REF: Constants Passed To The Conflict Handler
-**
-** Values that may be passed as the second argument to a conflict-handler.
-**
-**
-** - SQLITE_CHANGESET_DATA
-
-** The conflict handler is invoked with CHANGESET_DATA as the second argument
-** when processing a DELETE or UPDATE change if a row with the required
-** PRIMARY KEY fields is present in the database, but one or more other
-** (non primary-key) fields modified by the update do not contain the
-** expected "before" values.
-**
-** The conflicting row, in this case, is the database row with the matching
-** primary key.
-**
-**
- SQLITE_CHANGESET_NOTFOUND
-
-** The conflict handler is invoked with CHANGESET_NOTFOUND as the second
-** argument when processing a DELETE or UPDATE change if a row with the
-** required PRIMARY KEY fields is not present in the database.
-**
-** There is no conflicting row in this case. The results of invoking the
-** sqlite3changeset_conflict() API are undefined.
-**
-**
- SQLITE_CHANGESET_CONFLICT
-
-** CHANGESET_CONFLICT is passed as the second argument to the conflict
-** handler while processing an INSERT change if the operation would result
-** in duplicate primary key values.
-**
-** The conflicting row in this case is the database row with the matching
-** primary key.
-**
-**
- SQLITE_CHANGESET_FOREIGN_KEY
-
-** If foreign key handling is enabled, and applying a changeset leaves the
-** database in a state containing foreign key violations, the conflict
-** handler is invoked with CHANGESET_FOREIGN_KEY as the second argument
-** exactly once before the changeset is committed. If the conflict handler
-** returns CHANGESET_OMIT, the changes, including those that caused the
-** foreign key constraint violation, are committed. Or, if it returns
-** CHANGESET_ABORT, the changeset is rolled back.
-**
-** No current or conflicting row information is provided. The only function
-** it is possible to call on the supplied sqlite3_changeset_iter handle
-** is sqlite3changeset_fk_conflicts().
-**
-**
- SQLITE_CHANGESET_CONSTRAINT
-
-** If any other constraint violation occurs while applying a change (i.e.
-** a UNIQUE, CHECK or NOT NULL constraint), the conflict handler is
-** invoked with CHANGESET_CONSTRAINT as the second argument.
-**
-** There is no conflicting row in this case. The results of invoking the
-** sqlite3changeset_conflict() API are undefined.
-**
-**
-*/
-#define SQLITE_CHANGESET_DATA 1
-#define SQLITE_CHANGESET_NOTFOUND 2
-#define SQLITE_CHANGESET_CONFLICT 3
-#define SQLITE_CHANGESET_CONSTRAINT 4
-#define SQLITE_CHANGESET_FOREIGN_KEY 5
-
-/*
-** CAPI3REF: Constants Returned By The Conflict Handler
-**
-** A conflict handler callback must return one of the following three values.
-**
-**
-** - SQLITE_CHANGESET_OMIT
-
-** If a conflict handler returns this value no special action is taken. The
-** change that caused the conflict is not applied. The session module
-** continues to the next change in the changeset.
-**
-**
- SQLITE_CHANGESET_REPLACE
-
-** This value may only be returned if the second argument to the conflict
-** handler was SQLITE_CHANGESET_DATA or SQLITE_CHANGESET_CONFLICT. If this
-** is not the case, any changes applied so far are rolled back and the
-** call to sqlite3changeset_apply() returns SQLITE_MISUSE.
-**
-** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_DATA conflict
-** handler, then the conflicting row is either updated or deleted, depending
-** on the type of change.
-**
-** If CHANGESET_REPLACE is returned by an SQLITE_CHANGESET_CONFLICT conflict
-** handler, then the conflicting row is removed from the database and a
-** second attempt to apply the change is made. If this second attempt fails,
-** the original row is restored to the database before continuing.
-**
-**
- SQLITE_CHANGESET_ABORT
-
-** If this value is returned, any changes applied so far are rolled back
-** and the call to sqlite3changeset_apply() returns SQLITE_ABORT.
-**
-*/
-#define SQLITE_CHANGESET_OMIT 0
-#define SQLITE_CHANGESET_REPLACE 1
-#define SQLITE_CHANGESET_ABORT 2
-
-/*
-** CAPI3REF: Streaming Versions of API functions.
-**
-** The six streaming API xxx_strm() functions serve similar purposes to the
-** corresponding non-streaming API functions:
-**
-**
-** | Streaming function | Non-streaming equivalent |
-**
|---|
| sqlite3changeset_apply_str | [sqlite3changeset_apply]
-** |
| sqlite3changeset_concat_str | [sqlite3changeset_concat]
-** |
| sqlite3changeset_invert_str | [sqlite3changeset_invert]
-** |
| sqlite3changeset_start_str | [sqlite3changeset_start]
-** |
| sqlite3session_changeset_str | [sqlite3session_changeset]
-** |
| sqlite3session_patchset_str | [sqlite3session_patchset]
-** |
-**
-** Non-streaming functions that accept changesets (or patchsets) as input
-** require that the entire changeset be stored in a single buffer in memory.
-** Similarly, those that return a changeset or patchset do so by returning
-** a pointer to a single large buffer allocated using sqlite3_malloc().
-** Normally this is convenient. However, if an application running in a
-** low-memory environment is required to handle very large changesets, the
-** large contiguous memory allocations required can become onerous.
-**
-** In order to avoid this problem, instead of a single large buffer, input
-** is passed to a streaming API functions by way of a callback function that
-** the sessions module invokes to incrementally request input data as it is
-** required. In all cases, a pair of API function parameters such as
-**
-**
-** int nChangeset,
-** void *pChangeset,
-**
-**
-** Is replaced by:
-**
-**
-** int (*xInput)(void *pIn, void *pData, int *pnData),
-** void *pIn,
-**
-**
-** Each time the xInput callback is invoked by the sessions module, the first
-** argument passed is a copy of the supplied pIn context pointer. The second
-** argument, pData, points to a buffer (*pnData) bytes in size. Assuming no
-** error occurs the xInput method should copy up to (*pnData) bytes of data
-** into the buffer and set (*pnData) to the actual number of bytes copied
-** before returning SQLITE_OK. If the input is completely exhausted, (*pnData)
-** should be set to zero to indicate this. Or, if an error occurs, an SQLite
-** error code should be returned. In all cases, if an xInput callback returns
-** an error, all processing is abandoned and the streaming API function
-** returns a copy of the error code to the caller.
-**
-** In the case of sqlite3changeset_start_strm(), the xInput callback may be
-** invoked by the sessions module at any point during the lifetime of the
-** iterator. If such an xInput callback returns an error, the iterator enters
-** an error state, whereby all subsequent calls to iterator functions
-** immediately fail with the same error code as returned by xInput.
-**
-** Similarly, streaming API functions that return changesets (or patchsets)
-** return them in chunks by way of a callback function instead of via a
-** pointer to a single large buffer. In this case, a pair of parameters such
-** as:
-**
-**
-** int *pnChangeset,
-** void **ppChangeset,
-**
-**
-** Is replaced by:
-**
-**
-** int (*xOutput)(void *pOut, const void *pData, int nData),
-** void *pOut
-**
-**
-** The xOutput callback is invoked zero or more times to return data to
-** the application. The first parameter passed to each call is a copy of the
-** pOut pointer supplied by the application. The second parameter, pData,
-** points to a buffer nData bytes in size containing the chunk of output
-** data being returned. If the xOutput callback successfully processes the
-** supplied data, it should return SQLITE_OK to indicate success. Otherwise,
-** it should return some other SQLite error code. In this case processing
-** is immediately abandoned and the streaming API function returns a copy
-** of the xOutput error code to the application.
-**
-** The sessions module never invokes an xOutput callback with the third
-** parameter set to a value less than or equal to zero. Other than this,
-** no guarantees are made as to the size of the chunks of data returned.
-*/
-int sqlite3changeset_apply_strm(
- sqlite3 *db, /* Apply change to "main" db of this handle */
- int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */
- void *pIn, /* First arg for xInput */
- int(*xFilter)(
- void *pCtx, /* Copy of sixth arg to _apply() */
- const char *zTab /* Table name */
- ),
- int(*xConflict)(
- void *pCtx, /* Copy of sixth arg to _apply() */
- int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */
- sqlite3_changeset_iter *p /* Handle describing change and conflict */
- ),
- void *pCtx /* First argument passed to xConflict */
-);
-int sqlite3changeset_concat_strm(
- int (*xInputA)(void *pIn, void *pData, int *pnData),
- void *pInA,
- int (*xInputB)(void *pIn, void *pData, int *pnData),
- void *pInB,
- int (*xOutput)(void *pOut, const void *pData, int nData),
- void *pOut
-);
-int sqlite3changeset_invert_strm(
- int (*xInput)(void *pIn, void *pData, int *pnData),
- void *pIn,
- int (*xOutput)(void *pOut, const void *pData, int nData),
- void *pOut
-);
-int sqlite3changeset_start_strm(
- sqlite3_changeset_iter **pp,
- int (*xInput)(void *pIn, void *pData, int *pnData),
- void *pIn
-);
-int sqlite3session_changeset_strm(
- sqlite3_session *pSession,
- int (*xOutput)(void *pOut, const void *pData, int nData),
- void *pOut
-);
-int sqlite3session_patchset_strm(
- sqlite3_session *pSession,
- int (*xOutput)(void *pOut, const void *pData, int nData),
- void *pOut
-);
-int sqlite3changegroup_add_strm(sqlite3_changegroup*,
- int (*xInput)(void *pIn, void *pData, int *pnData),
- void *pIn
-);
-int sqlite3changegroup_output_strm(sqlite3_changegroup*,
- int (*xOutput)(void *pOut, const void *pData, int nData),
- void *pOut
-);
-
-
-/*
-** Make sure we can call this stuff from C++.
-*/
-#if 0
-}
-#endif
-
-#endif /* !defined(__SQLITESESSION_H_) && defined(SQLITE_ENABLE_SESSION) */
-
-/******** End of sqlite3session.h *********/
-/******** Begin file fts5.h *********/
-/*
-** 2014 May 31
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** Interfaces to extend FTS5. Using the interfaces defined in this file,
-** FTS5 may be extended with:
-**
-** * custom tokenizers, and
-** * custom auxiliary functions.
-*/
-
-
-#ifndef _FTS5_H
-#define _FTS5_H
-
-
-#if 0
-extern "C" {
-#endif
-
-/*************************************************************************
-** CUSTOM AUXILIARY FUNCTIONS
-**
-** Virtual table implementations may overload SQL functions by implementing
-** the sqlite3_module.xFindFunction() method.
-*/
-
-typedef struct Fts5ExtensionApi Fts5ExtensionApi;
-typedef struct Fts5Context Fts5Context;
-typedef struct Fts5PhraseIter Fts5PhraseIter;
-
-typedef void (*fts5_extension_function)(
- const Fts5ExtensionApi *pApi, /* API offered by current FTS version */
- Fts5Context *pFts, /* First arg to pass to pApi functions */
- sqlite3_context *pCtx, /* Context for returning result/error */
- int nVal, /* Number of values in apVal[] array */
- sqlite3_value **apVal /* Array of trailing arguments */
-);
-
-struct Fts5PhraseIter {
- const unsigned char *a;
- const unsigned char *b;
-};
-
-/*
-** EXTENSION API FUNCTIONS
-**
-** xUserData(pFts):
-** Return a copy of the context pointer the extension function was
-** registered with.
-**
-** xColumnTotalSize(pFts, iCol, pnToken):
-** If parameter iCol is less than zero, set output variable *pnToken
-** to the total number of tokens in the FTS5 table. Or, if iCol is
-** non-negative but less than the number of columns in the table, return
-** the total number of tokens in column iCol, considering all rows in
-** the FTS5 table.
-**
-** If parameter iCol is greater than or equal to the number of columns
-** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
-** an OOM condition or IO error), an appropriate SQLite error code is
-** returned.
-**
-** xColumnCount(pFts):
-** Return the number of columns in the table.
-**
-** xColumnSize(pFts, iCol, pnToken):
-** If parameter iCol is less than zero, set output variable *pnToken
-** to the total number of tokens in the current row. Or, if iCol is
-** non-negative but less than the number of columns in the table, set
-** *pnToken to the number of tokens in column iCol of the current row.
-**
-** If parameter iCol is greater than or equal to the number of columns
-** in the table, SQLITE_RANGE is returned. Or, if an error occurs (e.g.
-** an OOM condition or IO error), an appropriate SQLite error code is
-** returned.
-**
-** This function may be quite inefficient if used with an FTS5 table
-** created with the "columnsize=0" option.
-**
-** xColumnText:
-** This function attempts to retrieve the text of column iCol of the
-** current document. If successful, (*pz) is set to point to a buffer
-** containing the text in utf-8 encoding, (*pn) is set to the size in bytes
-** (not characters) of the buffer and SQLITE_OK is returned. Otherwise,
-** if an error occurs, an SQLite error code is returned and the final values
-** of (*pz) and (*pn) are undefined.
-**
-** xPhraseCount:
-** Returns the number of phrases in the current query expression.
-**
-** xPhraseSize:
-** Returns the number of tokens in phrase iPhrase of the query. Phrases
-** are numbered starting from zero.
-**
-** xInstCount:
-** Set *pnInst to the total number of occurrences of all phrases within
-** the query within the current row. Return SQLITE_OK if successful, or
-** an error code (i.e. SQLITE_NOMEM) if an error occurs.
-**
-** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option. If the FTS5 table is created
-** with either "detail=none" or "detail=column" and "content=" option
-** (i.e. if it is a contentless table), then this API always returns 0.
-**
-** xInst:
-** Query for the details of phrase match iIdx within the current row.
-** Phrase matches are numbered starting from zero, so the iIdx argument
-** should be greater than or equal to zero and smaller than the value
-** output by xInstCount().
-**
-** Usually, output parameter *piPhrase is set to the phrase number, *piCol
-** to the column in which it occurs and *piOff the token offset of the
-** first token of the phrase. The exception is if the table was created
-** with the offsets=0 option specified. In this case *piOff is always
-** set to -1.
-**
-** Returns SQLITE_OK if successful, or an error code (i.e. SQLITE_NOMEM)
-** if an error occurs.
-**
-** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option.
-**
-** xRowid:
-** Returns the rowid of the current row.
-**
-** xTokenize:
-** Tokenize text using the tokenizer belonging to the FTS5 table.
-**
-** xQueryPhrase(pFts5, iPhrase, pUserData, xCallback):
-** This API function is used to query the FTS table for phrase iPhrase
-** of the current query. Specifically, a query equivalent to:
-**
-** ... FROM ftstable WHERE ftstable MATCH $p ORDER BY rowid
-**
-** with $p set to a phrase equivalent to the phrase iPhrase of the
-** current query is executed. Any column filter that applies to
-** phrase iPhrase of the current query is included in $p. For each
-** row visited, the callback function passed as the fourth argument
-** is invoked. The context and API objects passed to the callback
-** function may be used to access the properties of each matched row.
-** Invoking Api.xUserData() returns a copy of the pointer passed as
-** the third argument to pUserData.
-**
-** If the callback function returns any value other than SQLITE_OK, the
-** query is abandoned and the xQueryPhrase function returns immediately.
-** If the returned value is SQLITE_DONE, xQueryPhrase returns SQLITE_OK.
-** Otherwise, the error code is propagated upwards.
-**
-** If the query runs to completion without incident, SQLITE_OK is returned.
-** Or, if some error occurs before the query completes or is aborted by
-** the callback, an SQLite error code is returned.
-**
-**
-** xSetAuxdata(pFts5, pAux, xDelete)
-**
-** Save the pointer passed as the second argument as the extension functions
-** "auxiliary data". The pointer may then be retrieved by the current or any
-** future invocation of the same fts5 extension function made as part of
-** of the same MATCH query using the xGetAuxdata() API.
-**
-** Each extension function is allocated a single auxiliary data slot for
-** each FTS query (MATCH expression). If the extension function is invoked
-** more than once for a single FTS query, then all invocations share a
-** single auxiliary data context.
-**
-** If there is already an auxiliary data pointer when this function is
-** invoked, then it is replaced by the new pointer. If an xDelete callback
-** was specified along with the original pointer, it is invoked at this
-** point.
-**
-** The xDelete callback, if one is specified, is also invoked on the
-** auxiliary data pointer after the FTS5 query has finished.
-**
-** If an error (e.g. an OOM condition) occurs within this function, an
-** the auxiliary data is set to NULL and an error code returned. If the
-** xDelete parameter was not NULL, it is invoked on the auxiliary data
-** pointer before returning.
-**
-**
-** xGetAuxdata(pFts5, bClear)
-**
-** Returns the current auxiliary data pointer for the fts5 extension
-** function. See the xSetAuxdata() method for details.
-**
-** If the bClear argument is non-zero, then the auxiliary data is cleared
-** (set to NULL) before this function returns. In this case the xDelete,
-** if any, is not invoked.
-**
-**
-** xRowCount(pFts5, pnRow)
-**
-** This function is used to retrieve the total number of rows in the table.
-** In other words, the same value that would be returned by:
-**
-** SELECT count(*) FROM ftstable;
-**
-** xPhraseFirst()
-** This function is used, along with type Fts5PhraseIter and the xPhraseNext
-** method, to iterate through all instances of a single query phrase within
-** the current row. This is the same information as is accessible via the
-** xInstCount/xInst APIs. While the xInstCount/xInst APIs are more convenient
-** to use, this API may be faster under some circumstances. To iterate
-** through instances of phrase iPhrase, use the following code:
-**
-** Fts5PhraseIter iter;
-** int iCol, iOff;
-** for(pApi->xPhraseFirst(pFts, iPhrase, &iter, &iCol, &iOff);
-** iCol>=0;
-** pApi->xPhraseNext(pFts, &iter, &iCol, &iOff)
-** ){
-** // An instance of phrase iPhrase at offset iOff of column iCol
-** }
-**
-** The Fts5PhraseIter structure is defined above. Applications should not
-** modify this structure directly - it should only be used as shown above
-** with the xPhraseFirst() and xPhraseNext() API methods (and by
-** xPhraseFirstColumn() and xPhraseNextColumn() as illustrated below).
-**
-** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" or "detail=column" option. If the FTS5 table is created
-** with either "detail=none" or "detail=column" and "content=" option
-** (i.e. if it is a contentless table), then this API always iterates
-** through an empty set (all calls to xPhraseFirst() set iCol to -1).
-**
-** xPhraseNext()
-** See xPhraseFirst above.
-**
-** xPhraseFirstColumn()
-** This function and xPhraseNextColumn() are similar to the xPhraseFirst()
-** and xPhraseNext() APIs described above. The difference is that instead
-** of iterating through all instances of a phrase in the current row, these
-** APIs are used to iterate through the set of columns in the current row
-** that contain one or more instances of a specified phrase. For example:
-**
-** Fts5PhraseIter iter;
-** int iCol;
-** for(pApi->xPhraseFirstColumn(pFts, iPhrase, &iter, &iCol);
-** iCol>=0;
-** pApi->xPhraseNextColumn(pFts, &iter, &iCol)
-** ){
-** // Column iCol contains at least one instance of phrase iPhrase
-** }
-**
-** This API can be quite slow if used with an FTS5 table created with the
-** "detail=none" option. If the FTS5 table is created with either
-** "detail=none" "content=" option (i.e. if it is a contentless table),
-** then this API always iterates through an empty set (all calls to
-** xPhraseFirstColumn() set iCol to -1).
-**
-** The information accessed using this API and its companion
-** xPhraseFirstColumn() may also be obtained using xPhraseFirst/xPhraseNext
-** (or xInst/xInstCount). The chief advantage of this API is that it is
-** significantly more efficient than those alternatives when used with
-** "detail=column" tables.
-**
-** xPhraseNextColumn()
-** See xPhraseFirstColumn above.
-*/
-struct Fts5ExtensionApi {
- int iVersion; /* Currently always set to 3 */
-
- void *(*xUserData)(Fts5Context*);
-
- int (*xColumnCount)(Fts5Context*);
- int (*xRowCount)(Fts5Context*, sqlite3_int64 *pnRow);
- int (*xColumnTotalSize)(Fts5Context*, int iCol, sqlite3_int64 *pnToken);
-
- int (*xTokenize)(Fts5Context*,
- const char *pText, int nText, /* Text to tokenize */
- void *pCtx, /* Context passed to xToken() */
- int (*xToken)(void*, int, const char*, int, int, int) /* Callback */
- );
-
- int (*xPhraseCount)(Fts5Context*);
- int (*xPhraseSize)(Fts5Context*, int iPhrase);
-
- int (*xInstCount)(Fts5Context*, int *pnInst);
- int (*xInst)(Fts5Context*, int iIdx, int *piPhrase, int *piCol, int *piOff);
-
- sqlite3_int64 (*xRowid)(Fts5Context*);
- int (*xColumnText)(Fts5Context*, int iCol, const char **pz, int *pn);
- int (*xColumnSize)(Fts5Context*, int iCol, int *pnToken);
-
- int (*xQueryPhrase)(Fts5Context*, int iPhrase, void *pUserData,
- int(*)(const Fts5ExtensionApi*,Fts5Context*,void*)
- );
- int (*xSetAuxdata)(Fts5Context*, void *pAux, void(*xDelete)(void*));
- void *(*xGetAuxdata)(Fts5Context*, int bClear);
-
- int (*xPhraseFirst)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*, int*);
- void (*xPhraseNext)(Fts5Context*, Fts5PhraseIter*, int *piCol, int *piOff);
-
- int (*xPhraseFirstColumn)(Fts5Context*, int iPhrase, Fts5PhraseIter*, int*);
- void (*xPhraseNextColumn)(Fts5Context*, Fts5PhraseIter*, int *piCol);
-};
-
-/*
-** CUSTOM AUXILIARY FUNCTIONS
-*************************************************************************/
-
-/*************************************************************************
-** CUSTOM TOKENIZERS
-**
-** Applications may also register custom tokenizer types. A tokenizer
-** is registered by providing fts5 with a populated instance of the
-** following structure. All structure methods must be defined, setting
-** any member of the fts5_tokenizer struct to NULL leads to undefined
-** behaviour. The structure methods are expected to function as follows:
-**
-** xCreate:
-** This function is used to allocate and inititalize a tokenizer instance.
-** A tokenizer instance is required to actually tokenize text.
-**
-** The first argument passed to this function is a copy of the (void*)
-** pointer provided by the application when the fts5_tokenizer object
-** was registered with FTS5 (the third argument to xCreateTokenizer()).
-** The second and third arguments are an array of nul-terminated strings
-** containing the tokenizer arguments, if any, specified following the
-** tokenizer name as part of the CREATE VIRTUAL TABLE statement used
-** to create the FTS5 table.
-**
-** The final argument is an output variable. If successful, (*ppOut)
-** should be set to point to the new tokenizer handle and SQLITE_OK
-** returned. If an error occurs, some value other than SQLITE_OK should
-** be returned. In this case, fts5 assumes that the final value of *ppOut
-** is undefined.
-**
-** xDelete:
-** This function is invoked to delete a tokenizer handle previously
-** allocated using xCreate(). Fts5 guarantees that this function will
-** be invoked exactly once for each successful call to xCreate().
-**
-** xTokenize:
-** This function is expected to tokenize the nText byte string indicated
-** by argument pText. pText may or may not be nul-terminated. The first
-** argument passed to this function is a pointer to an Fts5Tokenizer object
-** returned by an earlier call to xCreate().
-**
-** The second argument indicates the reason that FTS5 is requesting
-** tokenization of the supplied text. This is always one of the following
-** four values:
-**
-** - FTS5_TOKENIZE_DOCUMENT - A document is being inserted into
-** or removed from the FTS table. The tokenizer is being invoked to
-** determine the set of tokens to add to (or delete from) the
-** FTS index.
-**
-**
- FTS5_TOKENIZE_QUERY - A MATCH query is being executed
-** against the FTS index. The tokenizer is being called to tokenize
-** a bareword or quoted string specified as part of the query.
-**
-**
- (FTS5_TOKENIZE_QUERY | FTS5_TOKENIZE_PREFIX) - Same as
-** FTS5_TOKENIZE_QUERY, except that the bareword or quoted string is
-** followed by a "*" character, indicating that the last token
-** returned by the tokenizer will be treated as a token prefix.
-**
-**
- FTS5_TOKENIZE_AUX - The tokenizer is being invoked to
-** satisfy an fts5_api.xTokenize() request made by an auxiliary
-** function. Or an fts5_api.xColumnSize() request made by the same
-** on a columnsize=0 database.
-**
-**
-** For each token in the input string, the supplied callback xToken() must
-** be invoked. The first argument to it should be a copy of the pointer
-** passed as the second argument to xTokenize(). The third and fourth
-** arguments are a pointer to a buffer containing the token text, and the
-** size of the token in bytes. The 4th and 5th arguments are the byte offsets
-** of the first byte of and first byte immediately following the text from
-** which the token is derived within the input.
-**
-** The second argument passed to the xToken() callback ("tflags") should
-** normally be set to 0. The exception is if the tokenizer supports
-** synonyms. In this case see the discussion below for details.
-**
-** FTS5 assumes the xToken() callback is invoked for each token in the
-** order that they occur within the input text.
-**
-** If an xToken() callback returns any value other than SQLITE_OK, then
-** the tokenization should be abandoned and the xTokenize() method should
-** immediately return a copy of the xToken() return value. Or, if the
-** input buffer is exhausted, xTokenize() should return SQLITE_OK. Finally,
-** if an error occurs with the xTokenize() implementation itself, it
-** may abandon the tokenization and return any error code other than
-** SQLITE_OK or SQLITE_DONE.
-**
-** SYNONYM SUPPORT
-**
-** Custom tokenizers may also support synonyms. Consider a case in which a
-** user wishes to query for a phrase such as "first place". Using the
-** built-in tokenizers, the FTS5 query 'first + place' will match instances
-** of "first place" within the document set, but not alternative forms
-** such as "1st place". In some applications, it would be better to match
-** all instances of "first place" or "1st place" regardless of which form
-** the user specified in the MATCH query text.
-**
-** There are several ways to approach this in FTS5:
-**
-** - By mapping all synonyms to a single token. In this case, the
-** In the above example, this means that the tokenizer returns the
-** same token for inputs "first" and "1st". Say that token is in
-** fact "first", so that when the user inserts the document "I won
-** 1st place" entries are added to the index for tokens "i", "won",
-** "first" and "place". If the user then queries for '1st + place',
-** the tokenizer substitutes "first" for "1st" and the query works
-** as expected.
-**
-**
- By adding multiple synonyms for a single term to the FTS index.
-** In this case, when tokenizing query text, the tokenizer may
-** provide multiple synonyms for a single term within the document.
-** FTS5 then queries the index for each synonym individually. For
-** example, faced with the query:
-**
-**
-** ... MATCH 'first place'
-**
-** the tokenizer offers both "1st" and "first" as synonyms for the
-** first token in the MATCH query and FTS5 effectively runs a query
-** similar to:
-**
-**
-** ... MATCH '(first OR 1st) place'
-**
-** except that, for the purposes of auxiliary functions, the query
-** still appears to contain just two phrases - "(first OR 1st)"
-** being treated as a single phrase.
-**
-**
- By adding multiple synonyms for a single term to the FTS index.
-** Using this method, when tokenizing document text, the tokenizer
-** provides multiple synonyms for each token. So that when a
-** document such as "I won first place" is tokenized, entries are
-** added to the FTS index for "i", "won", "first", "1st" and
-** "place".
-**
-** This way, even if the tokenizer does not provide synonyms
-** when tokenizing query text (it should not - to do would be
-** inefficient), it doesn't matter if the user queries for
-** 'first + place' or '1st + place', as there are entires in the
-** FTS index corresponding to both forms of the first token.
-**
-**
-** Whether it is parsing document or query text, any call to xToken that
-** specifies a tflags argument with the FTS5_TOKEN_COLOCATED bit
-** is considered to supply a synonym for the previous token. For example,
-** when parsing the document "I won first place", a tokenizer that supports
-** synonyms would call xToken() 5 times, as follows:
-**
-**
-** xToken(pCtx, 0, "i", 1, 0, 1);
-** xToken(pCtx, 0, "won", 3, 2, 5);
-** xToken(pCtx, 0, "first", 5, 6, 11);
-** xToken(pCtx, FTS5_TOKEN_COLOCATED, "1st", 3, 6, 11);
-** xToken(pCtx, 0, "place", 5, 12, 17);
-**
-**
-** It is an error to specify the FTS5_TOKEN_COLOCATED flag the first time
-** xToken() is called. Multiple synonyms may be specified for a single token
-** by making multiple calls to xToken(FTS5_TOKEN_COLOCATED) in sequence.
-** There is no limit to the number of synonyms that may be provided for a
-** single token.
-**
-** In many cases, method (1) above is the best approach. It does not add
-** extra data to the FTS index or require FTS5 to query for multiple terms,
-** so it is efficient in terms of disk space and query speed. However, it
-** does not support prefix queries very well. If, as suggested above, the
-** token "first" is subsituted for "1st" by the tokenizer, then the query:
-**
-**
-** ... MATCH '1s*'
-**
-** will not match documents that contain the token "1st" (as the tokenizer
-** will probably not map "1s" to any prefix of "first").
-**
-** For full prefix support, method (3) may be preferred. In this case,
-** because the index contains entries for both "first" and "1st", prefix
-** queries such as 'fi*' or '1s*' will match correctly. However, because
-** extra entries are added to the FTS index, this method uses more space
-** within the database.
-**
-** Method (2) offers a midpoint between (1) and (3). Using this method,
-** a query such as '1s*' will match documents that contain the literal
-** token "1st", but not "first" (assuming the tokenizer is not able to
-** provide synonyms for prefixes). However, a non-prefix query like '1st'
-** will match against "1st" and "first". This method does not require
-** extra disk space, as no extra entries are added to the FTS index.
-** On the other hand, it may require more CPU cycles to run MATCH queries,
-** as separate queries of the FTS index are required for each synonym.
-**
-** When using methods (2) or (3), it is important that the tokenizer only
-** provide synonyms when tokenizing document text (method (2)) or query
-** text (method (3)), not both. Doing so will not cause any errors, but is
-** inefficient.
-*/
-typedef struct Fts5Tokenizer Fts5Tokenizer;
-typedef struct fts5_tokenizer fts5_tokenizer;
-struct fts5_tokenizer {
- int (*xCreate)(void*, const char **azArg, int nArg, Fts5Tokenizer **ppOut);
- void (*xDelete)(Fts5Tokenizer*);
- int (*xTokenize)(Fts5Tokenizer*,
- void *pCtx,
- int flags, /* Mask of FTS5_TOKENIZE_* flags */
- const char *pText, int nText,
- int (*xToken)(
- void *pCtx, /* Copy of 2nd argument to xTokenize() */
- int tflags, /* Mask of FTS5_TOKEN_* flags */
- const char *pToken, /* Pointer to buffer containing token */
- int nToken, /* Size of token in bytes */
- int iStart, /* Byte offset of token within input text */
- int iEnd /* Byte offset of end of token within input text */
- )
- );
-};
-
-/* Flags that may be passed as the third argument to xTokenize() */
-#define FTS5_TOKENIZE_QUERY 0x0001
-#define FTS5_TOKENIZE_PREFIX 0x0002
-#define FTS5_TOKENIZE_DOCUMENT 0x0004
-#define FTS5_TOKENIZE_AUX 0x0008
-
-/* Flags that may be passed by the tokenizer implementation back to FTS5
-** as the third argument to the supplied xToken callback. */
-#define FTS5_TOKEN_COLOCATED 0x0001 /* Same position as prev. token */
-
-/*
-** END OF CUSTOM TOKENIZERS
-*************************************************************************/
-
-/*************************************************************************
-** FTS5 EXTENSION REGISTRATION API
-*/
-typedef struct fts5_api fts5_api;
-struct fts5_api {
- int iVersion; /* Currently always set to 2 */
-
- /* Create a new tokenizer */
- int (*xCreateTokenizer)(
- fts5_api *pApi,
- const char *zName,
- void *pContext,
- fts5_tokenizer *pTokenizer,
- void (*xDestroy)(void*)
- );
-
- /* Find an existing tokenizer */
- int (*xFindTokenizer)(
- fts5_api *pApi,
- const char *zName,
- void **ppContext,
- fts5_tokenizer *pTokenizer
- );
-
- /* Create a new auxiliary function */
- int (*xCreateFunction)(
- fts5_api *pApi,
- const char *zName,
- void *pContext,
- fts5_extension_function xFunction,
- void (*xDestroy)(void*)
- );
-};
-
-/*
-** END OF REGISTRATION API
-*************************************************************************/
-
-#if 0
-} /* end of the 'extern "C"' block */
-#endif
-
-#endif /* _FTS5_H */
-
-
-/******** End of fts5.h *********/
-
-/************** End of sqlite3.h *********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-
-/*
-** Include the configuration header output by 'configure' if we're using the
-** autoconf-based build
-*/
-#ifdef _HAVE_SQLITE_CONFIG_H
-#include "config.h"
-#endif
-
-/************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/
-/************** Begin file sqliteLimit.h *************************************/
-/*
-** 2007 May 7
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file defines various limits of what SQLite can process.
-*/
-
-/*
-** The maximum length of a TEXT or BLOB in bytes. This also
-** limits the size of a row in a table or index.
-**
-** The hard limit is the ability of a 32-bit signed integer
-** to count the size: 2^31-1 or 2147483647.
-*/
-#ifndef SQLITE_MAX_LENGTH
-# define SQLITE_MAX_LENGTH 1000000000
-#endif
-
-/*
-** This is the maximum number of
-**
-** * Columns in a table
-** * Columns in an index
-** * Columns in a view
-** * Terms in the SET clause of an UPDATE statement
-** * Terms in the result set of a SELECT statement
-** * Terms in the GROUP BY or ORDER BY clauses of a SELECT statement.
-** * Terms in the VALUES clause of an INSERT statement
-**
-** The hard upper limit here is 32676. Most database people will
-** tell you that in a well-normalized database, you usually should
-** not have more than a dozen or so columns in any table. And if
-** that is the case, there is no point in having more than a few
-** dozen values in any of the other situations described above.
-*/
-#ifndef SQLITE_MAX_COLUMN
-# define SQLITE_MAX_COLUMN 2000
-#endif
-
-/*
-** The maximum length of a single SQL statement in bytes.
-**
-** It used to be the case that setting this value to zero would
-** turn the limit off. That is no longer true. It is not possible
-** to turn this limit off.
-*/
-#ifndef SQLITE_MAX_SQL_LENGTH
-# define SQLITE_MAX_SQL_LENGTH 1000000000
-#endif
-
-/*
-** The maximum depth of an expression tree. This is limited to
-** some extent by SQLITE_MAX_SQL_LENGTH. But sometime you might
-** want to place more severe limits on the complexity of an
-** expression.
-**
-** A value of 0 used to mean that the limit was not enforced.
-** But that is no longer true. The limit is now strictly enforced
-** at all times.
-*/
-#ifndef SQLITE_MAX_EXPR_DEPTH
-# define SQLITE_MAX_EXPR_DEPTH 1000
-#endif
-
-/*
-** The maximum number of terms in a compound SELECT statement.
-** The code generator for compound SELECT statements does one
-** level of recursion for each term. A stack overflow can result
-** if the number of terms is too large. In practice, most SQL
-** never has more than 3 or 4 terms. Use a value of 0 to disable
-** any limit on the number of terms in a compount SELECT.
-*/
-#ifndef SQLITE_MAX_COMPOUND_SELECT
-# define SQLITE_MAX_COMPOUND_SELECT 500
-#endif
-
-/*
-** The maximum number of opcodes in a VDBE program.
-** Not currently enforced.
-*/
-#ifndef SQLITE_MAX_VDBE_OP
-# define SQLITE_MAX_VDBE_OP 25000
-#endif
-
-/*
-** The maximum number of arguments to an SQL function.
-*/
-#ifndef SQLITE_MAX_FUNCTION_ARG
-# define SQLITE_MAX_FUNCTION_ARG 127
-#endif
-
-/*
-** The suggested maximum number of in-memory pages to use for
-** the main database table and for temporary tables.
-**
-** IMPLEMENTATION-OF: R-30185-15359 The default suggested cache size is -2000,
-** which means the cache size is limited to 2048000 bytes of memory.
-** IMPLEMENTATION-OF: R-48205-43578 The default suggested cache size can be
-** altered using the SQLITE_DEFAULT_CACHE_SIZE compile-time options.
-*/
-#ifndef SQLITE_DEFAULT_CACHE_SIZE
-# define SQLITE_DEFAULT_CACHE_SIZE -2000
-#endif
-
-/*
-** The default number of frames to accumulate in the log file before
-** checkpointing the database in WAL mode.
-*/
-#ifndef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT
-# define SQLITE_DEFAULT_WAL_AUTOCHECKPOINT 1000
-#endif
-
-/*
-** The maximum number of attached databases. This must be between 0
-** and 125. The upper bound of 125 is because the attached databases are
-** counted using a signed 8-bit integer which has a maximum value of 127
-** and we have to allow 2 extra counts for the "main" and "temp" databases.
-*/
-#ifndef SQLITE_MAX_ATTACHED
-# define SQLITE_MAX_ATTACHED 10
-#endif
-
-
-/*
-** The maximum value of a ?nnn wildcard that the parser will accept.
-*/
-#ifndef SQLITE_MAX_VARIABLE_NUMBER
-# define SQLITE_MAX_VARIABLE_NUMBER 999
-#endif
-
-/* Maximum page size. The upper bound on this value is 65536. This a limit
-** imposed by the use of 16-bit offsets within each page.
-**
-** Earlier versions of SQLite allowed the user to change this value at
-** compile time. This is no longer permitted, on the grounds that it creates
-** a library that is technically incompatible with an SQLite library
-** compiled with a different limit. If a process operating on a database
-** with a page-size of 65536 bytes crashes, then an instance of SQLite
-** compiled with the default page-size limit will not be able to rollback
-** the aborted transaction. This could lead to database corruption.
-*/
-#ifdef SQLITE_MAX_PAGE_SIZE
-# undef SQLITE_MAX_PAGE_SIZE
-#endif
-#define SQLITE_MAX_PAGE_SIZE 65536
-
-
-/*
-** The default size of a database page.
-*/
-#ifndef SQLITE_DEFAULT_PAGE_SIZE
-# define SQLITE_DEFAULT_PAGE_SIZE 4096
-#endif
-#if SQLITE_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
-# undef SQLITE_DEFAULT_PAGE_SIZE
-# define SQLITE_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE
-#endif
-
-/*
-** Ordinarily, if no value is explicitly provided, SQLite creates databases
-** with page size SQLITE_DEFAULT_PAGE_SIZE. However, based on certain
-** device characteristics (sector-size and atomic write() support),
-** SQLite may choose a larger value. This constant is the maximum value
-** SQLite will choose on its own.
-*/
-#ifndef SQLITE_MAX_DEFAULT_PAGE_SIZE
-# define SQLITE_MAX_DEFAULT_PAGE_SIZE 8192
-#endif
-#if SQLITE_MAX_DEFAULT_PAGE_SIZE>SQLITE_MAX_PAGE_SIZE
-# undef SQLITE_MAX_DEFAULT_PAGE_SIZE
-# define SQLITE_MAX_DEFAULT_PAGE_SIZE SQLITE_MAX_PAGE_SIZE
-#endif
-
-
-/*
-** Maximum number of pages in one database file.
-**
-** This is really just the default value for the max_page_count pragma.
-** This value can be lowered (or raised) at run-time using that the
-** max_page_count macro.
-*/
-#ifndef SQLITE_MAX_PAGE_COUNT
-# define SQLITE_MAX_PAGE_COUNT 1073741823
-#endif
-
-/*
-** Maximum length (in bytes) of the pattern in a LIKE or GLOB
-** operator.
-*/
-#ifndef SQLITE_MAX_LIKE_PATTERN_LENGTH
-# define SQLITE_MAX_LIKE_PATTERN_LENGTH 50000
-#endif
-
-/*
-** Maximum depth of recursion for triggers.
-**
-** A value of 1 means that a trigger program will not be able to itself
-** fire any triggers. A value of 0 means that no trigger programs at all
-** may be executed.
-*/
-#ifndef SQLITE_MAX_TRIGGER_DEPTH
-# define SQLITE_MAX_TRIGGER_DEPTH 1000
-#endif
-
-/************** End of sqliteLimit.h *****************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-
-/* Disable nuisance warnings on Borland compilers */
-#if defined(__BORLANDC__)
-#pragma warn -rch /* unreachable code */
-#pragma warn -ccc /* Condition is always true or false */
-#pragma warn -aus /* Assigned value is never used */
-#pragma warn -csu /* Comparing signed and unsigned */
-#pragma warn -spa /* Suspicious pointer arithmetic */
-#endif
-
-/*
-** Include standard header files as necessary
-*/
-#ifdef HAVE_STDINT_H
-#include
-#endif
-#ifdef HAVE_INTTYPES_H
-#include
-#endif
-
-/*
-** The following macros are used to cast pointers to integers and
-** integers to pointers. The way you do this varies from one compiler
-** to the next, so we have developed the following set of #if statements
-** to generate appropriate macros for a wide range of compilers.
-**
-** The correct "ANSI" way to do this is to use the intptr_t type.
-** Unfortunately, that typedef is not available on all compilers, or
-** if it is available, it requires an #include of specific headers
-** that vary from one machine to the next.
-**
-** Ticket #3860: The llvm-gcc-4.2 compiler from Apple chokes on
-** the ((void*)&((char*)0)[X]) construct. But MSVC chokes on ((void*)(X)).
-** So we have to define the macros in different ways depending on the
-** compiler.
-*/
-#if defined(__PTRDIFF_TYPE__) /* This case should work for GCC */
-# define SQLITE_INT_TO_PTR(X) ((void*)(__PTRDIFF_TYPE__)(X))
-# define SQLITE_PTR_TO_INT(X) ((int)(__PTRDIFF_TYPE__)(X))
-#elif !defined(__GNUC__) /* Works for compilers other than LLVM */
-# define SQLITE_INT_TO_PTR(X) ((void*)&((char*)0)[X])
-# define SQLITE_PTR_TO_INT(X) ((int)(((char*)X)-(char*)0))
-#elif defined(HAVE_STDINT_H) /* Use this case if we have ANSI headers */
-# define SQLITE_INT_TO_PTR(X) ((void*)(intptr_t)(X))
-# define SQLITE_PTR_TO_INT(X) ((int)(intptr_t)(X))
-#else /* Generates a warning - but it always works */
-# define SQLITE_INT_TO_PTR(X) ((void*)(X))
-# define SQLITE_PTR_TO_INT(X) ((int)(X))
-#endif
-
-/*
-** A macro to hint to the compiler that a function should not be
-** inlined.
-*/
-#if defined(__GNUC__)
-# define SQLITE_NOINLINE __attribute__((noinline))
-#elif defined(_MSC_VER) && _MSC_VER>=1310
-# define SQLITE_NOINLINE __declspec(noinline)
-#else
-# define SQLITE_NOINLINE
-#endif
-
-/*
-** Make sure that the compiler intrinsics we desire are enabled when
-** compiling with an appropriate version of MSVC unless prevented by
-** the SQLITE_DISABLE_INTRINSIC define.
-*/
-#if !defined(SQLITE_DISABLE_INTRINSIC)
-# if defined(_MSC_VER) && _MSC_VER>=1300
-# if !defined(_WIN32_WCE)
-# include
-# pragma intrinsic(_byteswap_ushort)
-# pragma intrinsic(_byteswap_ulong)
-# pragma intrinsic(_ReadWriteBarrier)
-# else
-# include
-# endif
-# endif
-#endif
-
-/*
-** The SQLITE_THREADSAFE macro must be defined as 0, 1, or 2.
-** 0 means mutexes are permanently disable and the library is never
-** threadsafe. 1 means the library is serialized which is the highest
-** level of threadsafety. 2 means the library is multithreaded - multiple
-** threads can use SQLite as long as no two threads try to use the same
-** database connection at the same time.
-**
-** Older versions of SQLite used an optional THREADSAFE macro.
-** We support that for legacy.
-*/
-#if !defined(SQLITE_THREADSAFE)
-# if defined(THREADSAFE)
-# define SQLITE_THREADSAFE THREADSAFE
-# else
-# define SQLITE_THREADSAFE 1 /* IMP: R-07272-22309 */
-# endif
-#endif
-
-/*
-** Powersafe overwrite is on by default. But can be turned off using
-** the -DSQLITE_POWERSAFE_OVERWRITE=0 command-line option.
-*/
-#ifndef SQLITE_POWERSAFE_OVERWRITE
-# define SQLITE_POWERSAFE_OVERWRITE 1
-#endif
-
-/*
-** EVIDENCE-OF: R-25715-37072 Memory allocation statistics are enabled by
-** default unless SQLite is compiled with SQLITE_DEFAULT_MEMSTATUS=0 in
-** which case memory allocation statistics are disabled by default.
-*/
-#if !defined(SQLITE_DEFAULT_MEMSTATUS)
-# define SQLITE_DEFAULT_MEMSTATUS 1
-#endif
-
-/*
-** Exactly one of the following macros must be defined in order to
-** specify which memory allocation subsystem to use.
-**
-** SQLITE_SYSTEM_MALLOC // Use normal system malloc()
-** SQLITE_WIN32_MALLOC // Use Win32 native heap API
-** SQLITE_ZERO_MALLOC // Use a stub allocator that always fails
-** SQLITE_MEMDEBUG // Debugging version of system malloc()
-**
-** On Windows, if the SQLITE_WIN32_MALLOC_VALIDATE macro is defined and the
-** assert() macro is enabled, each call into the Win32 native heap subsystem
-** will cause HeapValidate to be called. If heap validation should fail, an
-** assertion will be triggered.
-**
-** If none of the above are defined, then set SQLITE_SYSTEM_MALLOC as
-** the default.
-*/
-#if defined(SQLITE_SYSTEM_MALLOC) \
- + defined(SQLITE_WIN32_MALLOC) \
- + defined(SQLITE_ZERO_MALLOC) \
- + defined(SQLITE_MEMDEBUG)>1
-# error "Two or more of the following compile-time configuration options\
- are defined but at most one is allowed:\
- SQLITE_SYSTEM_MALLOC, SQLITE_WIN32_MALLOC, SQLITE_MEMDEBUG,\
- SQLITE_ZERO_MALLOC"
-#endif
-#if defined(SQLITE_SYSTEM_MALLOC) \
- + defined(SQLITE_WIN32_MALLOC) \
- + defined(SQLITE_ZERO_MALLOC) \
- + defined(SQLITE_MEMDEBUG)==0
-# define SQLITE_SYSTEM_MALLOC 1
-#endif
-
-/*
-** If SQLITE_MALLOC_SOFT_LIMIT is not zero, then try to keep the
-** sizes of memory allocations below this value where possible.
-*/
-#if !defined(SQLITE_MALLOC_SOFT_LIMIT)
-# define SQLITE_MALLOC_SOFT_LIMIT 1024
-#endif
-
-/*
-** We need to define _XOPEN_SOURCE as follows in order to enable
-** recursive mutexes on most Unix systems and fchmod() on OpenBSD.
-** But _XOPEN_SOURCE define causes problems for Mac OS X, so omit
-** it.
-*/
-#if !defined(_XOPEN_SOURCE) && !defined(__DARWIN__) && !defined(__APPLE__)
-# define _XOPEN_SOURCE 600
-#endif
-
-/*
-** NDEBUG and SQLITE_DEBUG are opposites. It should always be true that
-** defined(NDEBUG)==!defined(SQLITE_DEBUG). If this is not currently true,
-** make it true by defining or undefining NDEBUG.
-**
-** Setting NDEBUG makes the code smaller and faster by disabling the
-** assert() statements in the code. So we want the default action
-** to be for NDEBUG to be set and NDEBUG to be undefined only if SQLITE_DEBUG
-** is set. Thus NDEBUG becomes an opt-in rather than an opt-out
-** feature.
-*/
-#if !defined(NDEBUG) && !defined(SQLITE_DEBUG)
-# define NDEBUG 1
-#endif
-#if defined(NDEBUG) && defined(SQLITE_DEBUG)
-# undef NDEBUG
-#endif
-
-/*
-** Enable SQLITE_ENABLE_EXPLAIN_COMMENTS if SQLITE_DEBUG is turned on.
-*/
-#if !defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) && defined(SQLITE_DEBUG)
-# define SQLITE_ENABLE_EXPLAIN_COMMENTS 1
-#endif
-
-/*
-** The testcase() macro is used to aid in coverage testing. When
-** doing coverage testing, the condition inside the argument to
-** testcase() must be evaluated both true and false in order to
-** get full branch coverage. The testcase() macro is inserted
-** to help ensure adequate test coverage in places where simple
-** condition/decision coverage is inadequate. For example, testcase()
-** can be used to make sure boundary values are tested. For
-** bitmask tests, testcase() can be used to make sure each bit
-** is significant and used at least once. On switch statements
-** where multiple cases go to the same block of code, testcase()
-** can insure that all cases are evaluated.
-**
-*/
-#ifdef SQLITE_COVERAGE_TEST
-SQLITE_PRIVATE void sqlite3Coverage(int);
-# define testcase(X) if( X ){ sqlite3Coverage(__LINE__); }
-#else
-# define testcase(X)
-#endif
-
-/*
-** The TESTONLY macro is used to enclose variable declarations or
-** other bits of code that are needed to support the arguments
-** within testcase() and assert() macros.
-*/
-#if !defined(NDEBUG) || defined(SQLITE_COVERAGE_TEST)
-# define TESTONLY(X) X
-#else
-# define TESTONLY(X)
-#endif
-
-/*
-** Sometimes we need a small amount of code such as a variable initialization
-** to setup for a later assert() statement. We do not want this code to
-** appear when assert() is disabled. The following macro is therefore
-** used to contain that setup code. The "VVA" acronym stands for
-** "Verification, Validation, and Accreditation". In other words, the
-** code within VVA_ONLY() will only run during verification processes.
-*/
-#ifndef NDEBUG
-# define VVA_ONLY(X) X
-#else
-# define VVA_ONLY(X)
-#endif
-
-/*
-** The ALWAYS and NEVER macros surround boolean expressions which
-** are intended to always be true or false, respectively. Such
-** expressions could be omitted from the code completely. But they
-** are included in a few cases in order to enhance the resilience
-** of SQLite to unexpected behavior - to make the code "self-healing"
-** or "ductile" rather than being "brittle" and crashing at the first
-** hint of unplanned behavior.
-**
-** In other words, ALWAYS and NEVER are added for defensive code.
-**
-** When doing coverage testing ALWAYS and NEVER are hard-coded to
-** be true and false so that the unreachable code they specify will
-** not be counted as untested code.
-*/
-#if defined(SQLITE_COVERAGE_TEST) || defined(SQLITE_MUTATION_TEST)
-# define ALWAYS(X) (1)
-# define NEVER(X) (0)
-#elif !defined(NDEBUG)
-# define ALWAYS(X) ((X)?1:(assert(0),0))
-# define NEVER(X) ((X)?(assert(0),1):0)
-#else
-# define ALWAYS(X) (X)
-# define NEVER(X) (X)
-#endif
-
-/*
-** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is
-** defined. We need to defend against those failures when testing with
-** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches
-** during a normal build. The following macro can be used to disable tests
-** that are always false except when SQLITE_TEST_REALLOC_STRESS is set.
-*/
-#if defined(SQLITE_TEST_REALLOC_STRESS)
-# define ONLY_IF_REALLOC_STRESS(X) (X)
-#elif !defined(NDEBUG)
-# define ONLY_IF_REALLOC_STRESS(X) ((X)?(assert(0),1):0)
-#else
-# define ONLY_IF_REALLOC_STRESS(X) (0)
-#endif
-
-/*
-** Declarations used for tracing the operating system interfaces.
-*/
-#if defined(SQLITE_FORCE_OS_TRACE) || defined(SQLITE_TEST) || \
- (defined(SQLITE_DEBUG) && SQLITE_OS_WIN)
- extern int sqlite3OSTrace;
-# define OSTRACE(X) if( sqlite3OSTrace ) sqlite3DebugPrintf X
-# define SQLITE_HAVE_OS_TRACE
-#else
-# define OSTRACE(X)
-# undef SQLITE_HAVE_OS_TRACE
-#endif
-
-/*
-** Is the sqlite3ErrName() function needed in the build? Currently,
-** it is needed by "mutex_w32.c" (when debugging), "os_win.c" (when
-** OSTRACE is enabled), and by several "test*.c" files (which are
-** compiled using SQLITE_TEST).
-*/
-#if defined(SQLITE_HAVE_OS_TRACE) || defined(SQLITE_TEST) || \
- (defined(SQLITE_DEBUG) && SQLITE_OS_WIN)
-# define SQLITE_NEED_ERR_NAME
-#else
-# undef SQLITE_NEED_ERR_NAME
-#endif
-
-/*
-** SQLITE_ENABLE_EXPLAIN_COMMENTS is incompatible with SQLITE_OMIT_EXPLAIN
-*/
-#ifdef SQLITE_OMIT_EXPLAIN
-# undef SQLITE_ENABLE_EXPLAIN_COMMENTS
-#endif
-
-/*
-** Return true (non-zero) if the input is an integer that is too large
-** to fit in 32-bits. This macro is used inside of various testcase()
-** macros to verify that we have tested SQLite for large-file support.
-*/
-#define IS_BIG_INT(X) (((X)&~(i64)0xffffffff)!=0)
-
-/*
-** The macro unlikely() is a hint that surrounds a boolean
-** expression that is usually false. Macro likely() surrounds
-** a boolean expression that is usually true. These hints could,
-** in theory, be used by the compiler to generate better code, but
-** currently they are just comments for human readers.
-*/
-#define likely(X) (X)
-#define unlikely(X) (X)
-
-/************** Include hash.h in the middle of sqliteInt.h ******************/
-/************** Begin file hash.h ********************************************/
-/*
-** 2001 September 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This is the header file for the generic hash-table implementation
-** used in SQLite.
-*/
-#ifndef _SQLITE_HASH_H_
-#define _SQLITE_HASH_H_
-
-/* Forward declarations of structures. */
-typedef struct Hash Hash;
-typedef struct HashElem HashElem;
-
-/* A complete hash table is an instance of the following structure.
-** The internals of this structure are intended to be opaque -- client
-** code should not attempt to access or modify the fields of this structure
-** directly. Change this structure only by using the routines below.
-** However, some of the "procedures" and "functions" for modifying and
-** accessing this structure are really macros, so we can't really make
-** this structure opaque.
-**
-** All elements of the hash table are on a single doubly-linked list.
-** Hash.first points to the head of this list.
-**
-** There are Hash.htsize buckets. Each bucket points to a spot in
-** the global doubly-linked list. The contents of the bucket are the
-** element pointed to plus the next _ht.count-1 elements in the list.
-**
-** Hash.htsize and Hash.ht may be zero. In that case lookup is done
-** by a linear search of the global list. For small tables, the
-** Hash.ht table is never allocated because if there are few elements
-** in the table, it is faster to do a linear search than to manage
-** the hash table.
-*/
-struct Hash {
- unsigned int htsize; /* Number of buckets in the hash table */
- unsigned int count; /* Number of entries in this table */
- HashElem *first; /* The first element of the array */
- struct _ht { /* the hash table */
- int count; /* Number of entries with this hash */
- HashElem *chain; /* Pointer to first entry with this hash */
- } *ht;
-};
-
-/* Each element in the hash table is an instance of the following
-** structure. All elements are stored on a single doubly-linked list.
-**
-** Again, this structure is intended to be opaque, but it can't really
-** be opaque because it is used by macros.
-*/
-struct HashElem {
- HashElem *next, *prev; /* Next and previous elements in the table */
- void *data; /* Data associated with this element */
- const char *pKey; /* Key associated with this element */
-};
-
-/*
-** Access routines. To delete, insert a NULL pointer.
-*/
-SQLITE_PRIVATE void sqlite3HashInit(Hash*);
-SQLITE_PRIVATE void *sqlite3HashInsert(Hash*, const char *pKey, void *pData);
-SQLITE_PRIVATE void *sqlite3HashFind(const Hash*, const char *pKey);
-SQLITE_PRIVATE void sqlite3HashClear(Hash*);
-
-/*
-** Macros for looping over all elements of a hash table. The idiom is
-** like this:
-**
-** Hash h;
-** HashElem *p;
-** ...
-** for(p=sqliteHashFirst(&h); p; p=sqliteHashNext(p)){
-** SomeStructure *pData = sqliteHashData(p);
-** // do something with pData
-** }
-*/
-#define sqliteHashFirst(H) ((H)->first)
-#define sqliteHashNext(E) ((E)->next)
-#define sqliteHashData(E) ((E)->data)
-/* #define sqliteHashKey(E) ((E)->pKey) // NOT USED */
-/* #define sqliteHashKeysize(E) ((E)->nKey) // NOT USED */
-
-/*
-** Number of entries in a hash table
-*/
-/* #define sqliteHashCount(H) ((H)->count) // NOT USED */
-
-#endif /* _SQLITE_HASH_H_ */
-
-/************** End of hash.h ************************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include parse.h in the middle of sqliteInt.h *****************/
-/************** Begin file parse.h *******************************************/
-#define TK_SEMI 1
-#define TK_EXPLAIN 2
-#define TK_QUERY 3
-#define TK_PLAN 4
-#define TK_BEGIN 5
-#define TK_TRANSACTION 6
-#define TK_DEFERRED 7
-#define TK_IMMEDIATE 8
-#define TK_EXCLUSIVE 9
-#define TK_COMMIT 10
-#define TK_END 11
-#define TK_ROLLBACK 12
-#define TK_SAVEPOINT 13
-#define TK_RELEASE 14
-#define TK_TO 15
-#define TK_TABLE 16
-#define TK_CREATE 17
-#define TK_IF 18
-#define TK_NOT 19
-#define TK_EXISTS 20
-#define TK_TEMP 21
-#define TK_LP 22
-#define TK_RP 23
-#define TK_AS 24
-#define TK_WITHOUT 25
-#define TK_COMMA 26
-#define TK_OR 27
-#define TK_AND 28
-#define TK_IS 29
-#define TK_MATCH 30
-#define TK_LIKE_KW 31
-#define TK_BETWEEN 32
-#define TK_IN 33
-#define TK_ISNULL 34
-#define TK_NOTNULL 35
-#define TK_NE 36
-#define TK_EQ 37
-#define TK_GT 38
-#define TK_LE 39
-#define TK_LT 40
-#define TK_GE 41
-#define TK_ESCAPE 42
-#define TK_BITAND 43
-#define TK_BITOR 44
-#define TK_LSHIFT 45
-#define TK_RSHIFT 46
-#define TK_PLUS 47
-#define TK_MINUS 48
-#define TK_STAR 49
-#define TK_SLASH 50
-#define TK_REM 51
-#define TK_CONCAT 52
-#define TK_COLLATE 53
-#define TK_BITNOT 54
-#define TK_ID 55
-#define TK_INDEXED 56
-#define TK_ABORT 57
-#define TK_ACTION 58
-#define TK_AFTER 59
-#define TK_ANALYZE 60
-#define TK_ASC 61
-#define TK_ATTACH 62
-#define TK_BEFORE 63
-#define TK_BY 64
-#define TK_CASCADE 65
-#define TK_CAST 66
-#define TK_COLUMNKW 67
-#define TK_CONFLICT 68
-#define TK_DATABASE 69
-#define TK_DESC 70
-#define TK_DETACH 71
-#define TK_EACH 72
-#define TK_FAIL 73
-#define TK_FOR 74
-#define TK_IGNORE 75
-#define TK_INITIALLY 76
-#define TK_INSTEAD 77
-#define TK_NO 78
-#define TK_KEY 79
-#define TK_OF 80
-#define TK_OFFSET 81
-#define TK_PRAGMA 82
-#define TK_RAISE 83
-#define TK_RECURSIVE 84
-#define TK_REPLACE 85
-#define TK_RESTRICT 86
-#define TK_ROW 87
-#define TK_TRIGGER 88
-#define TK_VACUUM 89
-#define TK_VIEW 90
-#define TK_VIRTUAL 91
-#define TK_WITH 92
-#define TK_REINDEX 93
-#define TK_RENAME 94
-#define TK_CTIME_KW 95
-#define TK_ANY 96
-#define TK_STRING 97
-#define TK_JOIN_KW 98
-#define TK_CONSTRAINT 99
-#define TK_DEFAULT 100
-#define TK_NULL 101
-#define TK_PRIMARY 102
-#define TK_UNIQUE 103
-#define TK_CHECK 104
-#define TK_REFERENCES 105
-#define TK_AUTOINCR 106
-#define TK_ON 107
-#define TK_INSERT 108
-#define TK_DELETE 109
-#define TK_UPDATE 110
-#define TK_SET 111
-#define TK_DEFERRABLE 112
-#define TK_FOREIGN 113
-#define TK_DROP 114
-#define TK_UNION 115
-#define TK_ALL 116
-#define TK_EXCEPT 117
-#define TK_INTERSECT 118
-#define TK_SELECT 119
-#define TK_VALUES 120
-#define TK_DISTINCT 121
-#define TK_DOT 122
-#define TK_FROM 123
-#define TK_JOIN 124
-#define TK_USING 125
-#define TK_ORDER 126
-#define TK_GROUP 127
-#define TK_HAVING 128
-#define TK_LIMIT 129
-#define TK_WHERE 130
-#define TK_INTO 131
-#define TK_INTEGER 132
-#define TK_FLOAT 133
-#define TK_BLOB 134
-#define TK_VARIABLE 135
-#define TK_CASE 136
-#define TK_WHEN 137
-#define TK_THEN 138
-#define TK_ELSE 139
-#define TK_INDEX 140
-#define TK_ALTER 141
-#define TK_ADD 142
-#define TK_TO_TEXT 143
-#define TK_TO_BLOB 144
-#define TK_TO_NUMERIC 145
-#define TK_TO_INT 146
-#define TK_TO_REAL 147
-#define TK_ISNOT 148
-#define TK_END_OF_FILE 149
-#define TK_UNCLOSED_STRING 150
-#define TK_FUNCTION 151
-#define TK_COLUMN 152
-#define TK_AGG_FUNCTION 153
-#define TK_AGG_COLUMN 154
-#define TK_UMINUS 155
-#define TK_UPLUS 156
-#define TK_REGISTER 157
-#define TK_ASTERISK 158
-#define TK_SPAN 159
-#define TK_SPACE 160
-#define TK_ILLEGAL 161
-
-/* The token codes above must all fit in 8 bits */
-#define TKFLG_MASK 0xff
-
-/* Flags that can be added to a token code when it is not
-** being stored in a u8: */
-#define TKFLG_DONTFOLD 0x100 /* Omit constant folding optimizations */
-
-/************** End of parse.h ***********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-#include
-#include
-#include
-#include
-#include
-
-/*
-** If compiling for a processor that lacks floating point support,
-** substitute integer for floating-point
-*/
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# define double sqlite_int64
-# define float sqlite_int64
-# define LONGDOUBLE_TYPE sqlite_int64
-# ifndef SQLITE_BIG_DBL
-# define SQLITE_BIG_DBL (((sqlite3_int64)1)<<50)
-# endif
-# define SQLITE_OMIT_DATETIME_FUNCS 1
-# define SQLITE_OMIT_TRACE 1
-# undef SQLITE_MIXED_ENDIAN_64BIT_FLOAT
-# undef SQLITE_HAVE_ISNAN
-#endif
-#ifndef SQLITE_BIG_DBL
-# define SQLITE_BIG_DBL (1e99)
-#endif
-
-/*
-** OMIT_TEMPDB is set to 1 if SQLITE_OMIT_TEMPDB is defined, or 0
-** afterward. Having this macro allows us to cause the C compiler
-** to omit code used by TEMP tables without messy #ifndef statements.
-*/
-#ifdef SQLITE_OMIT_TEMPDB
-#define OMIT_TEMPDB 1
-#else
-#define OMIT_TEMPDB 0
-#endif
-
-/*
-** The "file format" number is an integer that is incremented whenever
-** the VDBE-level file format changes. The following macros define the
-** the default file format for new databases and the maximum file format
-** that the library can read.
-*/
-#define SQLITE_MAX_FILE_FORMAT 4
-#ifndef SQLITE_DEFAULT_FILE_FORMAT
-# define SQLITE_DEFAULT_FILE_FORMAT 4
-#endif
-
-/*
-** Determine whether triggers are recursive by default. This can be
-** changed at run-time using a pragma.
-*/
-#ifndef SQLITE_DEFAULT_RECURSIVE_TRIGGERS
-# define SQLITE_DEFAULT_RECURSIVE_TRIGGERS 0
-#endif
-
-/*
-** Provide a default value for SQLITE_TEMP_STORE in case it is not specified
-** on the command-line
-*/
-#ifndef SQLITE_TEMP_STORE
-# define SQLITE_TEMP_STORE 1
-# define SQLITE_TEMP_STORE_xc 1 /* Exclude from ctime.c */
-#endif
-
-/*
-** If no value has been provided for SQLITE_MAX_WORKER_THREADS, or if
-** SQLITE_TEMP_STORE is set to 3 (never use temporary files), set it
-** to zero.
-*/
-#if SQLITE_TEMP_STORE==3 || SQLITE_THREADSAFE==0
-# undef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS 0
-#endif
-#ifndef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS 8
-#endif
-#ifndef SQLITE_DEFAULT_WORKER_THREADS
-# define SQLITE_DEFAULT_WORKER_THREADS 0
-#endif
-#if SQLITE_DEFAULT_WORKER_THREADS>SQLITE_MAX_WORKER_THREADS
-# undef SQLITE_MAX_WORKER_THREADS
-# define SQLITE_MAX_WORKER_THREADS SQLITE_DEFAULT_WORKER_THREADS
-#endif
-
-/*
-** The default initial allocation for the pagecache when using separate
-** pagecaches for each database connection. A positive number is the
-** number of pages. A negative number N translations means that a buffer
-** of -1024*N bytes is allocated and used for as many pages as it will hold.
-*/
-#ifndef SQLITE_DEFAULT_PCACHE_INITSZ
-# define SQLITE_DEFAULT_PCACHE_INITSZ 100
-#endif
-
-/*
-** GCC does not define the offsetof() macro so we'll have to do it
-** ourselves.
-*/
-#ifndef offsetof
-#define offsetof(STRUCTURE,FIELD) ((int)((char*)&((STRUCTURE*)0)->FIELD))
-#endif
-
-/*
-** Macros to compute minimum and maximum of two numbers.
-*/
-#ifndef MIN
-# define MIN(A,B) ((A)<(B)?(A):(B))
-#endif
-#ifndef MAX
-# define MAX(A,B) ((A)>(B)?(A):(B))
-#endif
-
-/*
-** Swap two objects of type TYPE.
-*/
-#define SWAP(TYPE,A,B) {TYPE t=A; A=B; B=t;}
-
-/*
-** Check to see if this machine uses EBCDIC. (Yes, believe it or
-** not, there are still machines out there that use EBCDIC.)
-*/
-#if 'A' == '\301'
-# define SQLITE_EBCDIC 1
-#else
-# define SQLITE_ASCII 1
-#endif
-
-/*
-** Integers of known sizes. These typedefs might change for architectures
-** where the sizes very. Preprocessor macros are available so that the
-** types can be conveniently redefined at compile-type. Like this:
-**
-** cc '-DUINTPTR_TYPE=long long int' ...
-*/
-#ifndef UINT32_TYPE
-# ifdef HAVE_UINT32_T
-# define UINT32_TYPE uint32_t
-# else
-# define UINT32_TYPE unsigned int
-# endif
-#endif
-#ifndef UINT16_TYPE
-# ifdef HAVE_UINT16_T
-# define UINT16_TYPE uint16_t
-# else
-# define UINT16_TYPE unsigned short int
-# endif
-#endif
-#ifndef INT16_TYPE
-# ifdef HAVE_INT16_T
-# define INT16_TYPE int16_t
-# else
-# define INT16_TYPE short int
-# endif
-#endif
-#ifndef UINT8_TYPE
-# ifdef HAVE_UINT8_T
-# define UINT8_TYPE uint8_t
-# else
-# define UINT8_TYPE unsigned char
-# endif
-#endif
-#ifndef INT8_TYPE
-# ifdef HAVE_INT8_T
-# define INT8_TYPE int8_t
-# else
-# define INT8_TYPE signed char
-# endif
-#endif
-#ifndef LONGDOUBLE_TYPE
-# define LONGDOUBLE_TYPE long double
-#endif
-typedef sqlite_int64 i64; /* 8-byte signed integer */
-typedef sqlite_uint64 u64; /* 8-byte unsigned integer */
-typedef UINT32_TYPE u32; /* 4-byte unsigned integer */
-typedef UINT16_TYPE u16; /* 2-byte unsigned integer */
-typedef INT16_TYPE i16; /* 2-byte signed integer */
-typedef UINT8_TYPE u8; /* 1-byte unsigned integer */
-typedef INT8_TYPE i8; /* 1-byte signed integer */
-
-/*
-** SQLITE_MAX_U32 is a u64 constant that is the maximum u64 value
-** that can be stored in a u32 without loss of data. The value
-** is 0x00000000ffffffff. But because of quirks of some compilers, we
-** have to specify the value in the less intuitive manner shown:
-*/
-#define SQLITE_MAX_U32 ((((u64)1)<<32)-1)
-
-/*
-** The datatype used to store estimates of the number of rows in a
-** table or index. This is an unsigned integer type. For 99.9% of
-** the world, a 32-bit integer is sufficient. But a 64-bit integer
-** can be used at compile-time if desired.
-*/
-#ifdef SQLITE_64BIT_STATS
- typedef u64 tRowcnt; /* 64-bit only if requested at compile-time */
-#else
- typedef u32 tRowcnt; /* 32-bit is the default */
-#endif
-
-/*
-** Estimated quantities used for query planning are stored as 16-bit
-** logarithms. For quantity X, the value stored is 10*log2(X). This
-** gives a possible range of values of approximately 1.0e986 to 1e-986.
-** But the allowed values are "grainy". Not every value is representable.
-** For example, quantities 16 and 17 are both represented by a LogEst
-** of 40. However, since LogEst quantities are suppose to be estimates,
-** not exact values, this imprecision is not a problem.
-**
-** "LogEst" is short for "Logarithmic Estimate".
-**
-** Examples:
-** 1 -> 0 20 -> 43 10000 -> 132
-** 2 -> 10 25 -> 46 25000 -> 146
-** 3 -> 16 100 -> 66 1000000 -> 199
-** 4 -> 20 1000 -> 99 1048576 -> 200
-** 10 -> 33 1024 -> 100 4294967296 -> 320
-**
-** The LogEst can be negative to indicate fractional values.
-** Examples:
-**
-** 0.5 -> -10 0.1 -> -33 0.0625 -> -40
-*/
-typedef INT16_TYPE LogEst;
-
-/*
-** Set the SQLITE_PTRSIZE macro to the number of bytes in a pointer
-*/
-#ifndef SQLITE_PTRSIZE
-# if defined(__SIZEOF_POINTER__)
-# define SQLITE_PTRSIZE __SIZEOF_POINTER__
-# elif defined(i386) || defined(__i386__) || defined(_M_IX86) || \
- defined(_M_ARM) || defined(__arm__) || defined(__x86)
-# define SQLITE_PTRSIZE 4
-# else
-# define SQLITE_PTRSIZE 8
-# endif
-#endif
-
-/* The uptr type is an unsigned integer large enough to hold a pointer
-*/
-#if defined(HAVE_STDINT_H)
- typedef uintptr_t uptr;
-#elif SQLITE_PTRSIZE==4
- typedef u32 uptr;
-#else
- typedef u64 uptr;
-#endif
-
-/*
-** The SQLITE_WITHIN(P,S,E) macro checks to see if pointer P points to
-** something between S (inclusive) and E (exclusive).
-**
-** In other words, S is a buffer and E is a pointer to the first byte after
-** the end of buffer S. This macro returns true if P points to something
-** contained within the buffer S.
-*/
-#define SQLITE_WITHIN(P,S,E) (((uptr)(P)>=(uptr)(S))&&((uptr)(P)<(uptr)(E)))
-
-
-/*
-** Macros to determine whether the machine is big or little endian,
-** and whether or not that determination is run-time or compile-time.
-**
-** For best performance, an attempt is made to guess at the byte-order
-** using C-preprocessor macros. If that is unsuccessful, or if
-** -DSQLITE_RUNTIME_BYTEORDER=1 is set, then byte-order is determined
-** at run-time.
-*/
-#if (defined(i386) || defined(__i386__) || defined(_M_IX86) || \
- defined(__x86_64) || defined(__x86_64__) || defined(_M_X64) || \
- defined(_M_AMD64) || defined(_M_ARM) || defined(__x86) || \
- defined(__arm__)) && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER 1234
-# define SQLITE_BIGENDIAN 0
-# define SQLITE_LITTLEENDIAN 1
-# define SQLITE_UTF16NATIVE SQLITE_UTF16LE
-#endif
-#if (defined(sparc) || defined(__ppc__)) \
- && !defined(SQLITE_RUNTIME_BYTEORDER)
-# define SQLITE_BYTEORDER 4321
-# define SQLITE_BIGENDIAN 1
-# define SQLITE_LITTLEENDIAN 0
-# define SQLITE_UTF16NATIVE SQLITE_UTF16BE
-#endif
-#if !defined(SQLITE_BYTEORDER)
-# ifdef SQLITE_AMALGAMATION
- const int sqlite3one = 1;
-# else
- extern const int sqlite3one;
-# endif
-# define SQLITE_BYTEORDER 0 /* 0 means "unknown at compile-time" */
-# define SQLITE_BIGENDIAN (*(char *)(&sqlite3one)==0)
-# define SQLITE_LITTLEENDIAN (*(char *)(&sqlite3one)==1)
-# define SQLITE_UTF16NATIVE (SQLITE_BIGENDIAN?SQLITE_UTF16BE:SQLITE_UTF16LE)
-#endif
-
-/*
-** Constants for the largest and smallest possible 64-bit signed integers.
-** These macros are designed to work correctly on both 32-bit and 64-bit
-** compilers.
-*/
-#define LARGEST_INT64 (0xffffffff|(((i64)0x7fffffff)<<32))
-#define SMALLEST_INT64 (((i64)-1) - LARGEST_INT64)
-
-/*
-** Round up a number to the next larger multiple of 8. This is used
-** to force 8-byte alignment on 64-bit architectures.
-*/
-#define ROUND8(x) (((x)+7)&~7)
-
-/*
-** Round down to the nearest multiple of 8
-*/
-#define ROUNDDOWN8(x) ((x)&~7)
-
-/*
-** Assert that the pointer X is aligned to an 8-byte boundary. This
-** macro is used only within assert() to verify that the code gets
-** all alignment restrictions correct.
-**
-** Except, if SQLITE_4_BYTE_ALIGNED_MALLOC is defined, then the
-** underlying malloc() implementation might return us 4-byte aligned
-** pointers. In that case, only verify 4-byte alignment.
-*/
-#ifdef SQLITE_4_BYTE_ALIGNED_MALLOC
-# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&3)==0)
-#else
-# define EIGHT_BYTE_ALIGNMENT(X) ((((char*)(X) - (char*)0)&7)==0)
-#endif
-
-/*
-** Disable MMAP on platforms where it is known to not work
-*/
-#if defined(__OpenBSD__) || defined(__QNXNTO__)
-# undef SQLITE_MAX_MMAP_SIZE
-# define SQLITE_MAX_MMAP_SIZE 0
-#endif
-
-/*
-** Default maximum size of memory used by memory-mapped I/O in the VFS
-*/
-#ifdef __APPLE__
-# include
-#endif
-#ifndef SQLITE_MAX_MMAP_SIZE
-# if defined(__linux__) \
- || defined(_WIN32) \
- || (defined(__APPLE__) && defined(__MACH__)) \
- || defined(__sun) \
- || defined(__FreeBSD__) \
- || defined(__DragonFly__)
-# define SQLITE_MAX_MMAP_SIZE 0x7fff0000 /* 2147418112 */
-# else
-# define SQLITE_MAX_MMAP_SIZE 0
-# endif
-# define SQLITE_MAX_MMAP_SIZE_xc 1 /* exclude from ctime.c */
-#endif
-
-/*
-** The default MMAP_SIZE is zero on all platforms. Or, even if a larger
-** default MMAP_SIZE is specified at compile-time, make sure that it does
-** not exceed the maximum mmap size.
-*/
-#ifndef SQLITE_DEFAULT_MMAP_SIZE
-# define SQLITE_DEFAULT_MMAP_SIZE 0
-# define SQLITE_DEFAULT_MMAP_SIZE_xc 1 /* Exclude from ctime.c */
-#endif
-#if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE
-# undef SQLITE_DEFAULT_MMAP_SIZE
-# define SQLITE_DEFAULT_MMAP_SIZE SQLITE_MAX_MMAP_SIZE
-#endif
-
-/*
-** Only one of SQLITE_ENABLE_STAT3 or SQLITE_ENABLE_STAT4 can be defined.
-** Priority is given to SQLITE_ENABLE_STAT4. If either are defined, also
-** define SQLITE_ENABLE_STAT3_OR_STAT4
-*/
-#ifdef SQLITE_ENABLE_STAT4
-# undef SQLITE_ENABLE_STAT3
-# define SQLITE_ENABLE_STAT3_OR_STAT4 1
-#elif SQLITE_ENABLE_STAT3
-# define SQLITE_ENABLE_STAT3_OR_STAT4 1
-#elif SQLITE_ENABLE_STAT3_OR_STAT4
-# undef SQLITE_ENABLE_STAT3_OR_STAT4
-#endif
-
-/*
-** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not
-** the Select query generator tracing logic is turned on.
-*/
-#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE)
-# define SELECTTRACE_ENABLED 1
-#else
-# define SELECTTRACE_ENABLED 0
-#endif
-
-/*
-** An instance of the following structure is used to store the busy-handler
-** callback for a given sqlite handle.
-**
-** The sqlite.busyHandler member of the sqlite struct contains the busy
-** callback for the database handle. Each pager opened via the sqlite
-** handle is passed a pointer to sqlite.busyHandler. The busy-handler
-** callback is currently invoked only from within pager.c.
-*/
-typedef struct BusyHandler BusyHandler;
-struct BusyHandler {
- int (*xFunc)(void *,int); /* The busy callback */
- void *pArg; /* First arg to busy callback */
- int nBusy; /* Incremented with each busy call */
-};
-
-/*
-** Name of the master database table. The master database table
-** is a special table that holds the names and attributes of all
-** user tables and indices.
-*/
-#define MASTER_NAME "sqlite_master"
-#define TEMP_MASTER_NAME "sqlite_temp_master"
-
-/*
-** The root-page of the master database table.
-*/
-#define MASTER_ROOT 1
-
-/*
-** The name of the schema table.
-*/
-#define SCHEMA_TABLE(x) ((!OMIT_TEMPDB)&&(x==1)?TEMP_MASTER_NAME:MASTER_NAME)
-
-/*
-** A convenience macro that returns the number of elements in
-** an array.
-*/
-#define ArraySize(X) ((int)(sizeof(X)/sizeof(X[0])))
-
-/*
-** Determine if the argument is a power of two
-*/
-#define IsPowerOfTwo(X) (((X)&((X)-1))==0)
-
-/*
-** The following value as a destructor means to use sqlite3DbFree().
-** The sqlite3DbFree() routine requires two parameters instead of the
-** one parameter that destructors normally want. So we have to introduce
-** this magic value that the code knows to handle differently. Any
-** pointer will work here as long as it is distinct from SQLITE_STATIC
-** and SQLITE_TRANSIENT.
-*/
-#define SQLITE_DYNAMIC ((sqlite3_destructor_type)sqlite3MallocSize)
-
-/*
-** When SQLITE_OMIT_WSD is defined, it means that the target platform does
-** not support Writable Static Data (WSD) such as global and static variables.
-** All variables must either be on the stack or dynamically allocated from
-** the heap. When WSD is unsupported, the variable declarations scattered
-** throughout the SQLite code must become constants instead. The SQLITE_WSD
-** macro is used for this purpose. And instead of referencing the variable
-** directly, we use its constant as a key to lookup the run-time allocated
-** buffer that holds real variable. The constant is also the initializer
-** for the run-time allocated buffer.
-**
-** In the usual case where WSD is supported, the SQLITE_WSD and GLOBAL
-** macros become no-ops and have zero performance impact.
-*/
-#ifdef SQLITE_OMIT_WSD
- #define SQLITE_WSD const
- #define GLOBAL(t,v) (*(t*)sqlite3_wsd_find((void*)&(v), sizeof(v)))
- #define sqlite3GlobalConfig GLOBAL(struct Sqlite3Config, sqlite3Config)
-SQLITE_API int SQLITE_STDCALL sqlite3_wsd_init(int N, int J);
-SQLITE_API void *SQLITE_STDCALL sqlite3_wsd_find(void *K, int L);
-#else
- #define SQLITE_WSD
- #define GLOBAL(t,v) v
- #define sqlite3GlobalConfig sqlite3Config
-#endif
-
-/*
-** The following macros are used to suppress compiler warnings and to
-** make it clear to human readers when a function parameter is deliberately
-** left unused within the body of a function. This usually happens when
-** a function is called via a function pointer. For example the
-** implementation of an SQL aggregate step callback may not use the
-** parameter indicating the number of arguments passed to the aggregate,
-** if it knows that this is enforced elsewhere.
-**
-** When a function parameter is not used at all within the body of a function,
-** it is generally named "NotUsed" or "NotUsed2" to make things even clearer.
-** However, these macros may also be used to suppress warnings related to
-** parameters that may or may not be used depending on compilation options.
-** For example those parameters only used in assert() statements. In these
-** cases the parameters are named as per the usual conventions.
-*/
-#define UNUSED_PARAMETER(x) (void)(x)
-#define UNUSED_PARAMETER2(x,y) UNUSED_PARAMETER(x),UNUSED_PARAMETER(y)
-
-/*
-** Forward references to structures
-*/
-typedef struct AggInfo AggInfo;
-typedef struct AuthContext AuthContext;
-typedef struct AutoincInfo AutoincInfo;
-typedef struct Bitvec Bitvec;
-typedef struct CollSeq CollSeq;
-typedef struct Column Column;
-typedef struct Db Db;
-typedef struct Schema Schema;
-typedef struct Expr Expr;
-typedef struct ExprList ExprList;
-typedef struct ExprSpan ExprSpan;
-typedef struct FKey FKey;
-typedef struct FuncDestructor FuncDestructor;
-typedef struct FuncDef FuncDef;
-typedef struct FuncDefHash FuncDefHash;
-typedef struct IdList IdList;
-typedef struct Index Index;
-typedef struct IndexSample IndexSample;
-typedef struct KeyClass KeyClass;
-typedef struct KeyInfo KeyInfo;
-typedef struct Lookaside Lookaside;
-typedef struct LookasideSlot LookasideSlot;
-typedef struct Module Module;
-typedef struct NameContext NameContext;
-typedef struct Parse Parse;
-typedef struct PreUpdate PreUpdate;
-typedef struct PrintfArguments PrintfArguments;
-typedef struct RowSet RowSet;
-typedef struct Savepoint Savepoint;
-typedef struct Select Select;
-typedef struct SQLiteThread SQLiteThread;
-typedef struct SelectDest SelectDest;
-typedef struct SrcList SrcList;
-typedef struct StrAccum StrAccum;
-typedef struct Table Table;
-typedef struct TableLock TableLock;
-typedef struct Token Token;
-typedef struct TreeView TreeView;
-typedef struct Trigger Trigger;
-typedef struct TriggerPrg TriggerPrg;
-typedef struct TriggerStep TriggerStep;
-typedef struct UnpackedRecord UnpackedRecord;
-typedef struct VTable VTable;
-typedef struct VtabCtx VtabCtx;
-typedef struct Walker Walker;
-typedef struct WhereInfo WhereInfo;
-typedef struct With With;
-
-/*
-** Defer sourcing vdbe.h and btree.h until after the "u8" and
-** "BusyHandler" typedefs. vdbe.h also requires a few of the opaque
-** pointer types (i.e. FuncDef) defined above.
-*/
-/************** Include btree.h in the middle of sqliteInt.h *****************/
-/************** Begin file btree.h *******************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This header file defines the interface that the sqlite B-Tree file
-** subsystem. See comments in the source code for a detailed description
-** of what each interface routine does.
-*/
-#ifndef _BTREE_H_
-#define _BTREE_H_
-
-/* TODO: This definition is just included so other modules compile. It
-** needs to be revisited.
-*/
-#define SQLITE_N_BTREE_META 16
-
-/*
-** If defined as non-zero, auto-vacuum is enabled by default. Otherwise
-** it must be turned on for each database using "PRAGMA auto_vacuum = 1".
-*/
-#ifndef SQLITE_DEFAULT_AUTOVACUUM
- #define SQLITE_DEFAULT_AUTOVACUUM 0
-#endif
-
-#define BTREE_AUTOVACUUM_NONE 0 /* Do not do auto-vacuum */
-#define BTREE_AUTOVACUUM_FULL 1 /* Do full auto-vacuum */
-#define BTREE_AUTOVACUUM_INCR 2 /* Incremental vacuum */
-
-/*
-** Forward declarations of structure
-*/
-typedef struct Btree Btree;
-typedef struct BtCursor BtCursor;
-typedef struct BtShared BtShared;
-
-
-SQLITE_PRIVATE int sqlite3BtreeOpen(
- sqlite3_vfs *pVfs, /* VFS to use with this b-tree */
- const char *zFilename, /* Name of database file to open */
- sqlite3 *db, /* Associated database connection */
- Btree **ppBtree, /* Return open Btree* here */
- int flags, /* Flags */
- int vfsFlags /* Flags passed through to VFS open */
-);
-
-/* The flags parameter to sqlite3BtreeOpen can be the bitwise or of the
-** following values.
-**
-** NOTE: These values must match the corresponding PAGER_ values in
-** pager.h.
-*/
-#define BTREE_OMIT_JOURNAL 1 /* Do not create or use a rollback journal */
-#define BTREE_MEMORY 2 /* This is an in-memory DB */
-#define BTREE_SINGLE 4 /* The file contains at most 1 b-tree */
-#define BTREE_UNORDERED 8 /* Use of a hash implementation is OK */
-
-SQLITE_PRIVATE int sqlite3BtreeClose(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeSetCacheSize(Btree*,int);
-SQLITE_PRIVATE int sqlite3BtreeSetSpillSize(Btree*,int);
-#if SQLITE_MAX_MMAP_SIZE>0
-SQLITE_PRIVATE int sqlite3BtreeSetMmapLimit(Btree*,sqlite3_int64);
-#endif
-SQLITE_PRIVATE int sqlite3BtreeSetPagerFlags(Btree*,unsigned);
-SQLITE_PRIVATE int sqlite3BtreeSetPageSize(Btree *p, int nPagesize, int nReserve, int eFix);
-SQLITE_PRIVATE int sqlite3BtreeGetPageSize(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree*,int);
-SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree*,int);
-SQLITE_PRIVATE int sqlite3BtreeGetOptimalReserve(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeGetReserveNoMutex(Btree *p);
-SQLITE_PRIVATE int sqlite3BtreeSetAutoVacuum(Btree *, int);
-SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *);
-SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree*,int);
-SQLITE_PRIVATE int sqlite3BtreeCommitPhaseOne(Btree*, const char *zMaster);
-SQLITE_PRIVATE int sqlite3BtreeCommitPhaseTwo(Btree*, int);
-SQLITE_PRIVATE int sqlite3BtreeCommit(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeRollback(Btree*,int,int);
-SQLITE_PRIVATE int sqlite3BtreeBeginStmt(Btree*,int);
-SQLITE_PRIVATE int sqlite3BtreeCreateTable(Btree*, int*, int flags);
-SQLITE_PRIVATE int sqlite3BtreeIsInTrans(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeIsInReadTrans(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeIsInBackup(Btree*);
-SQLITE_PRIVATE void *sqlite3BtreeSchema(Btree *, int, void(*)(void *));
-SQLITE_PRIVATE int sqlite3BtreeSchemaLocked(Btree *pBtree);
-SQLITE_PRIVATE int sqlite3BtreeLockTable(Btree *pBtree, int iTab, u8 isWriteLock);
-SQLITE_PRIVATE int sqlite3BtreeSavepoint(Btree *, int, int);
-
-SQLITE_PRIVATE const char *sqlite3BtreeGetFilename(Btree *);
-SQLITE_PRIVATE const char *sqlite3BtreeGetJournalname(Btree *);
-SQLITE_PRIVATE int sqlite3BtreeCopyFile(Btree *, Btree *);
-
-SQLITE_PRIVATE int sqlite3BtreeIncrVacuum(Btree *);
-
-/* The flags parameter to sqlite3BtreeCreateTable can be the bitwise OR
-** of the flags shown below.
-**
-** Every SQLite table must have either BTREE_INTKEY or BTREE_BLOBKEY set.
-** With BTREE_INTKEY, the table key is a 64-bit integer and arbitrary data
-** is stored in the leaves. (BTREE_INTKEY is used for SQL tables.) With
-** BTREE_BLOBKEY, the key is an arbitrary BLOB and no content is stored
-** anywhere - the key is the content. (BTREE_BLOBKEY is used for SQL
-** indices.)
-*/
-#define BTREE_INTKEY 1 /* Table has only 64-bit signed integer keys */
-#define BTREE_BLOBKEY 2 /* Table has keys only - no data */
-
-SQLITE_PRIVATE int sqlite3BtreeDropTable(Btree*, int, int*);
-SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree*, int, int*);
-SQLITE_PRIVATE int sqlite3BtreeClearTableOfCursor(BtCursor*);
-SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree*, int, int);
-
-SQLITE_PRIVATE void sqlite3BtreeGetMeta(Btree *pBtree, int idx, u32 *pValue);
-SQLITE_PRIVATE int sqlite3BtreeUpdateMeta(Btree*, int idx, u32 value);
-
-SQLITE_PRIVATE int sqlite3BtreeNewDb(Btree *p);
-
-/*
-** The second parameter to sqlite3BtreeGetMeta or sqlite3BtreeUpdateMeta
-** should be one of the following values. The integer values are assigned
-** to constants so that the offset of the corresponding field in an
-** SQLite database header may be found using the following formula:
-**
-** offset = 36 + (idx * 4)
-**
-** For example, the free-page-count field is located at byte offset 36 of
-** the database file header. The incr-vacuum-flag field is located at
-** byte offset 64 (== 36+4*7).
-**
-** The BTREE_DATA_VERSION value is not really a value stored in the header.
-** It is a read-only number computed by the pager. But we merge it with
-** the header value access routines since its access pattern is the same.
-** Call it a "virtual meta value".
-*/
-#define BTREE_FREE_PAGE_COUNT 0
-#define BTREE_SCHEMA_VERSION 1
-#define BTREE_FILE_FORMAT 2
-#define BTREE_DEFAULT_CACHE_SIZE 3
-#define BTREE_LARGEST_ROOT_PAGE 4
-#define BTREE_TEXT_ENCODING 5
-#define BTREE_USER_VERSION 6
-#define BTREE_INCR_VACUUM 7
-#define BTREE_APPLICATION_ID 8
-#define BTREE_DATA_VERSION 15 /* A virtual meta-value */
-
-/*
-** Kinds of hints that can be passed into the sqlite3BtreeCursorHint()
-** interface.
-**
-** BTREE_HINT_RANGE (arguments: Expr*, Mem*)
-**
-** The first argument is an Expr* (which is guaranteed to be constant for
-** the lifetime of the cursor) that defines constraints on which rows
-** might be fetched with this cursor. The Expr* tree may contain
-** TK_REGISTER nodes that refer to values stored in the array of registers
-** passed as the second parameter. In other words, if Expr.op==TK_REGISTER
-** then the value of the node is the value in Mem[pExpr.iTable]. Any
-** TK_COLUMN node in the expression tree refers to the Expr.iColumn-th
-** column of the b-tree of the cursor. The Expr tree will not contain
-** any function calls nor subqueries nor references to b-trees other than
-** the cursor being hinted.
-**
-** The design of the _RANGE hint is aid b-tree implementations that try
-** to prefetch content from remote machines - to provide those
-** implementations with limits on what needs to be prefetched and thereby
-** reduce network bandwidth.
-**
-** Note that BTREE_HINT_FLAGS with BTREE_BULKLOAD is the only hint used by
-** standard SQLite. The other hints are provided for extentions that use
-** the SQLite parser and code generator but substitute their own storage
-** engine.
-*/
-#define BTREE_HINT_RANGE 0 /* Range constraints on queries */
-
-/*
-** Values that may be OR'd together to form the argument to the
-** BTREE_HINT_FLAGS hint for sqlite3BtreeCursorHint():
-**
-** The BTREE_BULKLOAD flag is set on index cursors when the index is going
-** to be filled with content that is already in sorted order.
-**
-** The BTREE_SEEK_EQ flag is set on cursors that will get OP_SeekGE or
-** OP_SeekLE opcodes for a range search, but where the range of entries
-** selected will all have the same key. In other words, the cursor will
-** be used only for equality key searches.
-**
-*/
-#define BTREE_BULKLOAD 0x00000001 /* Used to full index in sorted order */
-#define BTREE_SEEK_EQ 0x00000002 /* EQ seeks only - no range seeks */
-
-/*
-** Flags passed as the third argument to sqlite3BtreeCursor().
-**
-** For read-only cursors the wrFlag argument is always zero. For read-write
-** cursors it may be set to either (BTREE_WRCSR|BTREE_FORDELETE) or just
-** (BTREE_WRCSR). If the BTREE_FORDELETE bit is set, then the cursor will
-** only be used by SQLite for the following:
-**
-** * to seek to and then delete specific entries, and/or
-**
-** * to read values that will be used to create keys that other
-** BTREE_FORDELETE cursors will seek to and delete.
-**
-** The BTREE_FORDELETE flag is an optimization hint. It is not used by
-** by this, the native b-tree engine of SQLite, but it is available to
-** alternative storage engines that might be substituted in place of this
-** b-tree system. For alternative storage engines in which a delete of
-** the main table row automatically deletes corresponding index rows,
-** the FORDELETE flag hint allows those alternative storage engines to
-** skip a lot of work. Namely: FORDELETE cursors may treat all SEEK
-** and DELETE operations as no-ops, and any READ operation against a
-** FORDELETE cursor may return a null row: 0x01 0x00.
-*/
-#define BTREE_WRCSR 0x00000004 /* read-write cursor */
-#define BTREE_FORDELETE 0x00000008 /* Cursor is for seek/delete only */
-
-SQLITE_PRIVATE int sqlite3BtreeCursor(
- Btree*, /* BTree containing table to open */
- int iTable, /* Index of root page */
- int wrFlag, /* 1 for writing. 0 for read-only */
- struct KeyInfo*, /* First argument to compare function */
- BtCursor *pCursor /* Space to write cursor structure */
-);
-SQLITE_PRIVATE int sqlite3BtreeCursorSize(void);
-SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*);
-SQLITE_PRIVATE void sqlite3BtreeCursorHintFlags(BtCursor*, unsigned);
-#ifdef SQLITE_ENABLE_CURSOR_HINTS
-SQLITE_PRIVATE void sqlite3BtreeCursorHint(BtCursor*, int, ...);
-#endif
-
-SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor*);
-SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked(
- BtCursor*,
- UnpackedRecord *pUnKey,
- i64 intKey,
- int bias,
- int *pRes
-);
-SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor*);
-SQLITE_PRIVATE int sqlite3BtreeCursorRestore(BtCursor*, int*);
-SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*, u8 flags);
-
-/* Allowed flags for the 2nd argument to sqlite3BtreeDelete() */
-#define BTREE_SAVEPOSITION 0x02 /* Leave cursor pointing at NEXT or PREV */
-#define BTREE_AUXDELETE 0x04 /* not the primary delete operation */
-
-SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const void *pKey, i64 nKey,
- const void *pData, int nData,
- int nZero, int bias, int seekResult);
-SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*);
-SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes);
-SQLITE_PRIVATE int sqlite3BtreeKeySize(BtCursor*, i64 *pSize);
-SQLITE_PRIVATE int sqlite3BtreeKey(BtCursor*, u32 offset, u32 amt, void*);
-SQLITE_PRIVATE const void *sqlite3BtreeKeyFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE const void *sqlite3BtreeDataFetch(BtCursor*, u32 *pAmt);
-SQLITE_PRIVATE int sqlite3BtreeDataSize(BtCursor*, u32 *pSize);
-SQLITE_PRIVATE int sqlite3BtreeData(BtCursor*, u32 offset, u32 amt, void*);
-
-SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*);
-SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*);
-
-SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor*, u32 offset, u32 amt, void*);
-SQLITE_PRIVATE void sqlite3BtreeIncrblobCursor(BtCursor *);
-SQLITE_PRIVATE void sqlite3BtreeClearCursor(BtCursor *);
-SQLITE_PRIVATE int sqlite3BtreeSetVersion(Btree *pBt, int iVersion);
-SQLITE_PRIVATE int sqlite3BtreeCursorHasHint(BtCursor*, unsigned int mask);
-SQLITE_PRIVATE int sqlite3BtreeIsReadonly(Btree *pBt);
-SQLITE_PRIVATE int sqlite3HeaderSizeBtree(void);
-
-#ifndef NDEBUG
-SQLITE_PRIVATE int sqlite3BtreeCursorIsValid(BtCursor*);
-#endif
-
-#ifndef SQLITE_OMIT_BTREECOUNT
-SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *, i64 *);
-#endif
-
-#ifdef SQLITE_TEST
-SQLITE_PRIVATE int sqlite3BtreeCursorInfo(BtCursor*, int*, int);
-SQLITE_PRIVATE void sqlite3BtreeCursorList(Btree*);
-#endif
-
-#ifndef SQLITE_OMIT_WAL
-SQLITE_PRIVATE int sqlite3BtreeCheckpoint(Btree*, int, int *, int *);
-#endif
-
-/*
-** If we are not using shared cache, then there is no need to
-** use mutexes to access the BtShared structures. So make the
-** Enter and Leave procedures no-ops.
-*/
-#ifndef SQLITE_OMIT_SHARED_CACHE
-SQLITE_PRIVATE void sqlite3BtreeEnter(Btree*);
-SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3*);
-SQLITE_PRIVATE int sqlite3BtreeSharable(Btree*);
-SQLITE_PRIVATE void sqlite3BtreeEnterCursor(BtCursor*);
-#else
-# define sqlite3BtreeEnter(X)
-# define sqlite3BtreeEnterAll(X)
-# define sqlite3BtreeSharable(X) 0
-# define sqlite3BtreeEnterCursor(X)
-#endif
-
-#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE
-SQLITE_PRIVATE void sqlite3BtreeLeave(Btree*);
-SQLITE_PRIVATE void sqlite3BtreeLeaveCursor(BtCursor*);
-SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3*);
-#ifndef NDEBUG
- /* These routines are used inside assert() statements only. */
-SQLITE_PRIVATE int sqlite3BtreeHoldsMutex(Btree*);
-SQLITE_PRIVATE int sqlite3BtreeHoldsAllMutexes(sqlite3*);
-SQLITE_PRIVATE int sqlite3SchemaMutexHeld(sqlite3*,int,Schema*);
-#endif
-#else
-
-# define sqlite3BtreeLeave(X)
-# define sqlite3BtreeLeaveCursor(X)
-# define sqlite3BtreeLeaveAll(X)
-
-# define sqlite3BtreeHoldsMutex(X) 1
-# define sqlite3BtreeHoldsAllMutexes(X) 1
-# define sqlite3SchemaMutexHeld(X,Y,Z) 1
-#endif
-
-
-#endif /* _BTREE_H_ */
-
-/************** End of btree.h ***********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include vdbe.h in the middle of sqliteInt.h ******************/
-/************** Begin file vdbe.h ********************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** Header file for the Virtual DataBase Engine (VDBE)
-**
-** This header defines the interface to the virtual database engine
-** or VDBE. The VDBE implements an abstract machine that runs a
-** simple program to access and modify the underlying database.
-*/
-#ifndef _SQLITE_VDBE_H_
-#define _SQLITE_VDBE_H_
-/* #include */
-
-/*
-** A single VDBE is an opaque structure named "Vdbe". Only routines
-** in the source file sqliteVdbe.c are allowed to see the insides
-** of this structure.
-*/
-typedef struct Vdbe Vdbe;
-
-/*
-** The names of the following types declared in vdbeInt.h are required
-** for the VdbeOp definition.
-*/
-typedef struct Mem Mem;
-typedef struct SubProgram SubProgram;
-
-/*
-** A single instruction of the virtual machine has an opcode
-** and as many as three operands. The instruction is recorded
-** as an instance of the following structure:
-*/
-struct VdbeOp {
- u8 opcode; /* What operation to perform */
- signed char p4type; /* One of the P4_xxx constants for p4 */
- u8 notUsed1;
- u8 p5; /* Fifth parameter is an unsigned character */
- int p1; /* First operand */
- int p2; /* Second parameter (often the jump destination) */
- int p3; /* The third parameter */
- union p4union { /* fourth parameter */
- int i; /* Integer value if p4type==P4_INT32 */
- void *p; /* Generic pointer */
- char *z; /* Pointer to data for string (char array) types */
- i64 *pI64; /* Used when p4type is P4_INT64 */
- double *pReal; /* Used when p4type is P4_REAL */
- FuncDef *pFunc; /* Used when p4type is P4_FUNCDEF */
- sqlite3_context *pCtx; /* Used when p4type is P4_FUNCCTX */
- CollSeq *pColl; /* Used when p4type is P4_COLLSEQ */
- Mem *pMem; /* Used when p4type is P4_MEM */
- VTable *pVtab; /* Used when p4type is P4_VTAB */
- KeyInfo *pKeyInfo; /* Used when p4type is P4_KEYINFO */
- int *ai; /* Used when p4type is P4_INTARRAY */
- SubProgram *pProgram; /* Used when p4type is P4_SUBPROGRAM */
- Table *pTab; /* Used when p4type is P4_TABLE */
-#ifdef SQLITE_ENABLE_CURSOR_HINTS
- Expr *pExpr; /* Used when p4type is P4_EXPR */
-#endif
- int (*xAdvance)(BtCursor *, int *);
- } p4;
-#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
- char *zComment; /* Comment to improve readability */
-#endif
-#ifdef VDBE_PROFILE
- u32 cnt; /* Number of times this instruction was executed */
- u64 cycles; /* Total time spent executing this instruction */
-#endif
-#ifdef SQLITE_VDBE_COVERAGE
- int iSrcLine; /* Source-code line that generated this opcode */
-#endif
-};
-typedef struct VdbeOp VdbeOp;
-
-
-/*
-** A sub-routine used to implement a trigger program.
-*/
-struct SubProgram {
- VdbeOp *aOp; /* Array of opcodes for sub-program */
- int nOp; /* Elements in aOp[] */
- int nMem; /* Number of memory cells required */
- int nCsr; /* Number of cursors required */
- int nOnce; /* Number of OP_Once instructions */
- void *token; /* id that may be used to recursive triggers */
- SubProgram *pNext; /* Next sub-program already visited */
-};
-
-/*
-** A smaller version of VdbeOp used for the VdbeAddOpList() function because
-** it takes up less space.
-*/
-struct VdbeOpList {
- u8 opcode; /* What operation to perform */
- signed char p1; /* First operand */
- signed char p2; /* Second parameter (often the jump destination) */
- signed char p3; /* Third parameter */
-};
-typedef struct VdbeOpList VdbeOpList;
-
-/*
-** Allowed values of VdbeOp.p4type
-*/
-#define P4_NOTUSED 0 /* The P4 parameter is not used */
-#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */
-#define P4_STATIC (-2) /* Pointer to a static string */
-#define P4_COLLSEQ (-4) /* P4 is a pointer to a CollSeq structure */
-#define P4_FUNCDEF (-5) /* P4 is a pointer to a FuncDef structure */
-#define P4_KEYINFO (-6) /* P4 is a pointer to a KeyInfo structure */
-#define P4_EXPR (-7) /* P4 is a pointer to an Expr tree */
-#define P4_MEM (-8) /* P4 is a pointer to a Mem* structure */
-#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */
-#define P4_VTAB (-10) /* P4 is a pointer to an sqlite3_vtab structure */
-#define P4_MPRINTF (-11) /* P4 is a string obtained from sqlite3_mprintf() */
-#define P4_REAL (-12) /* P4 is a 64-bit floating point value */
-#define P4_INT64 (-13) /* P4 is a 64-bit signed integer */
-#define P4_INT32 (-14) /* P4 is a 32-bit signed integer */
-#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */
-#define P4_SUBPROGRAM (-18) /* P4 is a pointer to a SubProgram structure */
-#define P4_ADVANCE (-19) /* P4 is a pointer to BtreeNext() or BtreePrev() */
-#define P4_TABLE (-20) /* P4 is a pointer to a Table structure */
-#define P4_FUNCCTX (-21) /* P4 is a pointer to an sqlite3_context object */
-
-/* Error message codes for OP_Halt */
-#define P5_ConstraintNotNull 1
-#define P5_ConstraintUnique 2
-#define P5_ConstraintCheck 3
-#define P5_ConstraintFK 4
-
-/*
-** The Vdbe.aColName array contains 5n Mem structures, where n is the
-** number of columns of data returned by the statement.
-*/
-#define COLNAME_NAME 0
-#define COLNAME_DECLTYPE 1
-#define COLNAME_DATABASE 2
-#define COLNAME_TABLE 3
-#define COLNAME_COLUMN 4
-#ifdef SQLITE_ENABLE_COLUMN_METADATA
-# define COLNAME_N 5 /* Number of COLNAME_xxx symbols */
-#else
-# ifdef SQLITE_OMIT_DECLTYPE
-# define COLNAME_N 1 /* Store only the name */
-# else
-# define COLNAME_N 2 /* Store the name and decltype */
-# endif
-#endif
-
-/*
-** The following macro converts a relative address in the p2 field
-** of a VdbeOp structure into a negative number so that
-** sqlite3VdbeAddOpList() knows that the address is relative. Calling
-** the macro again restores the address.
-*/
-#define ADDR(X) (-1-(X))
-
-/*
-** The makefile scans the vdbe.c source file and creates the "opcodes.h"
-** header file that defines a number for each opcode used by the VDBE.
-*/
-/************** Include opcodes.h in the middle of vdbe.h ********************/
-/************** Begin file opcodes.h *****************************************/
-/* Automatically generated. Do not edit */
-/* See the tool/mkopcodeh.tcl script for details */
-#define OP_Savepoint 0
-#define OP_AutoCommit 1
-#define OP_Transaction 2
-#define OP_SorterNext 3
-#define OP_PrevIfOpen 4
-#define OP_NextIfOpen 5
-#define OP_Prev 6
-#define OP_Next 7
-#define OP_Checkpoint 8
-#define OP_JournalMode 9
-#define OP_Vacuum 10
-#define OP_VFilter 11 /* synopsis: iplan=r[P3] zplan='P4' */
-#define OP_VUpdate 12 /* synopsis: data=r[P3@P2] */
-#define OP_Goto 13
-#define OP_Gosub 14
-#define OP_InitCoroutine 15
-#define OP_Yield 16
-#define OP_MustBeInt 17
-#define OP_Jump 18
-#define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */
-#define OP_Once 20
-#define OP_If 21
-#define OP_IfNot 22
-#define OP_SeekLT 23 /* synopsis: key=r[P3@P4] */
-#define OP_SeekLE 24 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGE 25 /* synopsis: key=r[P3@P4] */
-#define OP_SeekGT 26 /* synopsis: key=r[P3@P4] */
-#define OP_Or 27 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */
-#define OP_And 28 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */
-#define OP_NoConflict 29 /* synopsis: key=r[P3@P4] */
-#define OP_NotFound 30 /* synopsis: key=r[P3@P4] */
-#define OP_Found 31 /* synopsis: key=r[P3@P4] */
-#define OP_NotExists 32 /* synopsis: intkey=r[P3] */
-#define OP_Last 33
-#define OP_IsNull 34 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */
-#define OP_NotNull 35 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */
-#define OP_Ne 36 /* same as TK_NE, synopsis: if r[P1]!=r[P3] goto P2 */
-#define OP_Eq 37 /* same as TK_EQ, synopsis: if r[P1]==r[P3] goto P2 */
-#define OP_Gt 38 /* same as TK_GT, synopsis: if r[P1]>r[P3] goto P2 */
-#define OP_Le 39 /* same as TK_LE, synopsis: if r[P1]<=r[P3] goto P2 */
-#define OP_Lt 40 /* same as TK_LT, synopsis: if r[P1]=r[P3] goto P2 */
-#define OP_SorterSort 42
-#define OP_BitAnd 43 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */
-#define OP_BitOr 44 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */
-#define OP_ShiftLeft 45 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<>r[P1] */
-#define OP_Add 47 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */
-#define OP_Subtract 48 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */
-#define OP_Multiply 49 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */
-#define OP_Divide 50 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */
-#define OP_Remainder 51 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */
-#define OP_Concat 52 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */
-#define OP_Sort 53
-#define OP_BitNot 54 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */
-#define OP_Rewind 55
-#define OP_IdxLE 56 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGT 57 /* synopsis: key=r[P3@P4] */
-#define OP_IdxLT 58 /* synopsis: key=r[P3@P4] */
-#define OP_IdxGE 59 /* synopsis: key=r[P3@P4] */
-#define OP_RowSetRead 60 /* synopsis: r[P3]=rowset(P1) */
-#define OP_RowSetTest 61 /* synopsis: if r[P3] in rowset(P1) goto P2 */
-#define OP_Program 62
-#define OP_FkIfZero 63 /* synopsis: if fkctr[P1]==0 goto P2 */
-#define OP_IfPos 64 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */
-#define OP_IfNotZero 65 /* synopsis: if r[P1]!=0 then r[P1]-=P3, goto P2 */
-#define OP_DecrJumpZero 66 /* synopsis: if (--r[P1])==0 goto P2 */
-#define OP_IncrVacuum 67
-#define OP_VNext 68
-#define OP_Init 69 /* synopsis: Start at P2 */
-#define OP_Return 70
-#define OP_EndCoroutine 71
-#define OP_HaltIfNull 72 /* synopsis: if r[P3]=null halt */
-#define OP_Halt 73
-#define OP_Integer 74 /* synopsis: r[P2]=P1 */
-#define OP_Int64 75 /* synopsis: r[P2]=P4 */
-#define OP_String 76 /* synopsis: r[P2]='P4' (len=P1) */
-#define OP_Null 77 /* synopsis: r[P2..P3]=NULL */
-#define OP_SoftNull 78 /* synopsis: r[P1]=NULL */
-#define OP_Blob 79 /* synopsis: r[P2]=P4 (len=P1) */
-#define OP_Variable 80 /* synopsis: r[P2]=parameter(P1,P4) */
-#define OP_Move 81 /* synopsis: r[P2@P3]=r[P1@P3] */
-#define OP_Copy 82 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */
-#define OP_SCopy 83 /* synopsis: r[P2]=r[P1] */
-#define OP_IntCopy 84 /* synopsis: r[P2]=r[P1] */
-#define OP_ResultRow 85 /* synopsis: output=r[P1@P2] */
-#define OP_CollSeq 86
-#define OP_Function0 87 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_Function 88 /* synopsis: r[P3]=func(r[P2@P5]) */
-#define OP_AddImm 89 /* synopsis: r[P1]=r[P1]+P2 */
-#define OP_RealAffinity 90
-#define OP_Cast 91 /* synopsis: affinity(r[P1]) */
-#define OP_Permutation 92
-#define OP_Compare 93 /* synopsis: r[P1@P3] <-> r[P2@P3] */
-#define OP_Column 94 /* synopsis: r[P3]=PX */
-#define OP_Affinity 95 /* synopsis: affinity(r[P1@P2]) */
-#define OP_MakeRecord 96 /* synopsis: r[P3]=mkrec(r[P1@P2]) */
-#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */
-#define OP_Count 98 /* synopsis: r[P2]=count() */
-#define OP_ReadCookie 99
-#define OP_SetCookie 100
-#define OP_ReopenIdx 101 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenRead 102 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenWrite 103 /* synopsis: root=P2 iDb=P3 */
-#define OP_OpenAutoindex 104 /* synopsis: nColumn=P2 */
-#define OP_OpenEphemeral 105 /* synopsis: nColumn=P2 */
-#define OP_SorterOpen 106
-#define OP_SequenceTest 107 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */
-#define OP_OpenPseudo 108 /* synopsis: P3 columns in r[P2] */
-#define OP_Close 109
-#define OP_ColumnsUsed 110
-#define OP_Sequence 111 /* synopsis: r[P2]=cursor[P1].ctr++ */
-#define OP_NewRowid 112 /* synopsis: r[P2]=rowid */
-#define OP_Insert 113 /* synopsis: intkey=r[P3] data=r[P2] */
-#define OP_InsertInt 114 /* synopsis: intkey=P3 data=r[P2] */
-#define OP_Delete 115
-#define OP_ResetCount 116
-#define OP_SorterCompare 117 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */
-#define OP_SorterData 118 /* synopsis: r[P2]=data */
-#define OP_RowKey 119 /* synopsis: r[P2]=key */
-#define OP_RowData 120 /* synopsis: r[P2]=data */
-#define OP_Rowid 121 /* synopsis: r[P2]=rowid */
-#define OP_NullRow 122
-#define OP_SorterInsert 123
-#define OP_IdxInsert 124 /* synopsis: key=r[P2] */
-#define OP_IdxDelete 125 /* synopsis: key=r[P2@P3] */
-#define OP_Seek 126 /* synopsis: Move P3 to P1.rowid */
-#define OP_IdxRowid 127 /* synopsis: r[P2]=rowid */
-#define OP_Destroy 128
-#define OP_Clear 129
-#define OP_ResetSorter 130
-#define OP_CreateIndex 131 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_CreateTable 132 /* synopsis: r[P2]=root iDb=P1 */
-#define OP_Real 133 /* same as TK_FLOAT, synopsis: r[P2]=P4 */
-#define OP_ParseSchema 134
-#define OP_LoadAnalysis 135
-#define OP_DropTable 136
-#define OP_DropIndex 137
-#define OP_DropTrigger 138
-#define OP_IntegrityCk 139
-#define OP_RowSetAdd 140 /* synopsis: rowset(P1)=r[P2] */
-#define OP_Param 141
-#define OP_FkCounter 142 /* synopsis: fkctr[P1]+=P2 */
-#define OP_MemMax 143 /* synopsis: r[P1]=max(r[P1],r[P2]) */
-#define OP_OffsetLimit 144 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */
-#define OP_AggStep0 145 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggStep 146 /* synopsis: accum=r[P3] step(r[P2@P5]) */
-#define OP_AggFinal 147 /* synopsis: accum=r[P1] N=P2 */
-#define OP_Expire 148
-#define OP_TableLock 149 /* synopsis: iDb=P1 root=P2 write=P3 */
-#define OP_VBegin 150
-#define OP_VCreate 151
-#define OP_VDestroy 152
-#define OP_VOpen 153
-#define OP_VColumn 154 /* synopsis: r[P3]=vcolumn(P2) */
-#define OP_VRename 155
-#define OP_Pagecount 156
-#define OP_MaxPgcnt 157
-#define OP_CursorHint 158
-#define OP_Noop 159
-#define OP_Explain 160
-
-/* Properties such as "out2" or "jump" that are specified in
-** comments following the "case" for each opcode in the vdbe.c
-** are encoded into bitvectors as follows:
-*/
-#define OPFLG_JUMP 0x01 /* jump: P2 holds jmp target */
-#define OPFLG_IN1 0x02 /* in1: P1 is an input */
-#define OPFLG_IN2 0x04 /* in2: P2 is an input */
-#define OPFLG_IN3 0x08 /* in3: P3 is an input */
-#define OPFLG_OUT2 0x10 /* out2: P2 is an output */
-#define OPFLG_OUT3 0x20 /* out3: P3 is an output */
-#define OPFLG_INITIALIZER {\
-/* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01,\
-/* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x01,\
-/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x09,\
-/* 24 */ 0x09, 0x09, 0x09, 0x26, 0x26, 0x09, 0x09, 0x09,\
-/* 32 */ 0x09, 0x01, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\
-/* 40 */ 0x0b, 0x0b, 0x01, 0x26, 0x26, 0x26, 0x26, 0x26,\
-/* 48 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x01, 0x12, 0x01,\
-/* 56 */ 0x01, 0x01, 0x01, 0x01, 0x23, 0x0b, 0x01, 0x01,\
-/* 64 */ 0x03, 0x03, 0x03, 0x01, 0x01, 0x01, 0x02, 0x02,\
-/* 72 */ 0x08, 0x00, 0x10, 0x10, 0x10, 0x10, 0x00, 0x10,\
-/* 80 */ 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00, 0x00,\
-/* 88 */ 0x00, 0x02, 0x02, 0x02, 0x00, 0x00, 0x00, 0x00,\
-/* 96 */ 0x00, 0x10, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00,\
-/* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10,\
-/* 112 */ 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 120 */ 0x00, 0x10, 0x00, 0x04, 0x04, 0x00, 0x00, 0x10,\
-/* 128 */ 0x10, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00, 0x00,\
-/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00, 0x04,\
-/* 144 */ 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\
-/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\
-/* 160 */ 0x00,}
-
-/* The sqlite3P2Values() routine is able to run faster if it knows
-** the value of the largest JUMP opcode. The smaller the maximum
-** JUMP opcode the better, so the mkopcodeh.tcl script that
-** generated this include file strives to group all JUMP opcodes
-** together near the beginning of the list.
-*/
-#define SQLITE_MX_JUMP_OPCODE 69 /* Maximum JUMP opcode */
-
-/************** End of opcodes.h *********************************************/
-/************** Continuing where we left off in vdbe.h ***********************/
-
-/*
-** Prototypes for the VDBE interface. See comments on the implementation
-** for a description of what each of these routines does.
-*/
-SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse*);
-SQLITE_PRIVATE int sqlite3VdbeAddOp0(Vdbe*,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOp1(Vdbe*,int,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOp2(Vdbe*,int,int,int);
-SQLITE_PRIVATE int sqlite3VdbeGoto(Vdbe*,int);
-SQLITE_PRIVATE int sqlite3VdbeLoadString(Vdbe*,int,const char*);
-SQLITE_PRIVATE void sqlite3VdbeMultiLoad(Vdbe*,int,const char*,...);
-SQLITE_PRIVATE int sqlite3VdbeAddOp3(Vdbe*,int,int,int,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOp4(Vdbe*,int,int,int,int,const char *zP4,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOp4Dup8(Vdbe*,int,int,int,int,const u8*,int);
-SQLITE_PRIVATE int sqlite3VdbeAddOp4Int(Vdbe*,int,int,int,int,int);
-SQLITE_PRIVATE void sqlite3VdbeEndCoroutine(Vdbe*,int);
-#if defined(SQLITE_DEBUG) && !defined(SQLITE_TEST_REALLOC_STRESS)
-SQLITE_PRIVATE void sqlite3VdbeVerifyNoMallocRequired(Vdbe *p, int N);
-#else
-# define sqlite3VdbeVerifyNoMallocRequired(A,B)
-#endif
-SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno);
-SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*);
-SQLITE_PRIVATE void sqlite3VdbeChangeOpcode(Vdbe*, u32 addr, u8);
-SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1);
-SQLITE_PRIVATE void sqlite3VdbeChangeP2(Vdbe*, u32 addr, int P2);
-SQLITE_PRIVATE void sqlite3VdbeChangeP3(Vdbe*, u32 addr, int P3);
-SQLITE_PRIVATE void sqlite3VdbeChangeP5(Vdbe*, u8 P5);
-SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe*, int addr);
-SQLITE_PRIVATE int sqlite3VdbeChangeToNoop(Vdbe*, int addr);
-SQLITE_PRIVATE int sqlite3VdbeDeletePriorOpcode(Vdbe*, u8 op);
-SQLITE_PRIVATE void sqlite3VdbeChangeP4(Vdbe*, int addr, const char *zP4, int N);
-SQLITE_PRIVATE void sqlite3VdbeSetP4KeyInfo(Parse*, Index*);
-SQLITE_PRIVATE void sqlite3VdbeUsesBtree(Vdbe*, int);
-SQLITE_PRIVATE VdbeOp *sqlite3VdbeGetOp(Vdbe*, int);
-SQLITE_PRIVATE int sqlite3VdbeMakeLabel(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeRunOnlyOnce(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeReusable(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3*,Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*);
-SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int);
-SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*);
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int);
-#endif
-SQLITE_PRIVATE void sqlite3VdbeResetStepResult(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeRewind(Vdbe*);
-SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe*,int);
-SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*));
-SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*);
-SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int);
-SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*);
-SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*);
-SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe*, int, u8);
-SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe*, int);
-#ifndef SQLITE_OMIT_TRACE
-SQLITE_PRIVATE char *sqlite3VdbeExpandSql(Vdbe*, const char*);
-#endif
-SQLITE_PRIVATE int sqlite3MemCompare(const Mem*, const Mem*, const CollSeq*);
-
-SQLITE_PRIVATE void sqlite3VdbeRecordUnpack(KeyInfo*,int,const void*,UnpackedRecord*);
-SQLITE_PRIVATE int sqlite3VdbeRecordCompare(int,const void*,UnpackedRecord*);
-SQLITE_PRIVATE int sqlite3VdbeRecordCompareWithSkip(int, const void *, UnpackedRecord *, int);
-SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord(KeyInfo *, char *, int, char **);
-
-typedef int (*RecordCompare)(int,const void*,UnpackedRecord*);
-SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*);
-
-#ifndef SQLITE_OMIT_TRIGGER
-SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *);
-#endif
-
-/* Use SQLITE_ENABLE_COMMENTS to enable generation of extra comments on
-** each VDBE opcode.
-**
-** Use the SQLITE_ENABLE_MODULE_COMMENTS macro to see some extra no-op
-** comments in VDBE programs that show key decision points in the code
-** generator.
-*/
-#ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS
-SQLITE_PRIVATE void sqlite3VdbeComment(Vdbe*, const char*, ...);
-# define VdbeComment(X) sqlite3VdbeComment X
-SQLITE_PRIVATE void sqlite3VdbeNoopComment(Vdbe*, const char*, ...);
-# define VdbeNoopComment(X) sqlite3VdbeNoopComment X
-# ifdef SQLITE_ENABLE_MODULE_COMMENTS
-# define VdbeModuleComment(X) sqlite3VdbeNoopComment X
-# else
-# define VdbeModuleComment(X)
-# endif
-#else
-# define VdbeComment(X)
-# define VdbeNoopComment(X)
-# define VdbeModuleComment(X)
-#endif
-
-/*
-** The VdbeCoverage macros are used to set a coverage testing point
-** for VDBE branch instructions. The coverage testing points are line
-** numbers in the sqlite3.c source file. VDBE branch coverage testing
-** only works with an amalagmation build. That's ok since a VDBE branch
-** coverage build designed for testing the test suite only. No application
-** should ever ship with VDBE branch coverage measuring turned on.
-**
-** VdbeCoverage(v) // Mark the previously coded instruction
-** // as a branch
-**
-** VdbeCoverageIf(v, conditional) // Mark previous if conditional true
-**
-** VdbeCoverageAlwaysTaken(v) // Previous branch is always taken
-**
-** VdbeCoverageNeverTaken(v) // Previous branch is never taken
-**
-** Every VDBE branch operation must be tagged with one of the macros above.
-** If not, then when "make test" is run with -DSQLITE_VDBE_COVERAGE and
-** -DSQLITE_DEBUG then an ALWAYS() will fail in the vdbeTakeBranch()
-** routine in vdbe.c, alerting the developer to the missed tag.
-*/
-#ifdef SQLITE_VDBE_COVERAGE
-SQLITE_PRIVATE void sqlite3VdbeSetLineNumber(Vdbe*,int);
-# define VdbeCoverage(v) sqlite3VdbeSetLineNumber(v,__LINE__)
-# define VdbeCoverageIf(v,x) if(x)sqlite3VdbeSetLineNumber(v,__LINE__)
-# define VdbeCoverageAlwaysTaken(v) sqlite3VdbeSetLineNumber(v,2);
-# define VdbeCoverageNeverTaken(v) sqlite3VdbeSetLineNumber(v,1);
-# define VDBE_OFFSET_LINENO(x) (__LINE__+x)
-#else
-# define VdbeCoverage(v)
-# define VdbeCoverageIf(v,x)
-# define VdbeCoverageAlwaysTaken(v)
-# define VdbeCoverageNeverTaken(v)
-# define VDBE_OFFSET_LINENO(x) 0
-#endif
-
-#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
-SQLITE_PRIVATE void sqlite3VdbeScanStatus(Vdbe*, int, int, int, LogEst, const char*);
-#else
-# define sqlite3VdbeScanStatus(a,b,c,d,e)
-#endif
-
-#endif
-
-/************** End of vdbe.h ************************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include pager.h in the middle of sqliteInt.h *****************/
-/************** Begin file pager.h *******************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This header file defines the interface that the sqlite page cache
-** subsystem. The page cache subsystem reads and writes a file a page
-** at a time and provides a journal for rollback.
-*/
-
-#ifndef _PAGER_H_
-#define _PAGER_H_
-
-/*
-** Default maximum size for persistent journal files. A negative
-** value means no limit. This value may be overridden using the
-** sqlite3PagerJournalSizeLimit() API. See also "PRAGMA journal_size_limit".
-*/
-#ifndef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT
- #define SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT -1
-#endif
-
-/*
-** The type used to represent a page number. The first page in a file
-** is called page 1. 0 is used to represent "not a page".
-*/
-typedef u32 Pgno;
-
-/*
-** Each open file is managed by a separate instance of the "Pager" structure.
-*/
-typedef struct Pager Pager;
-
-/*
-** Handle type for pages.
-*/
-typedef struct PgHdr DbPage;
-
-/*
-** Page number PAGER_MJ_PGNO is never used in an SQLite database (it is
-** reserved for working around a windows/posix incompatibility). It is
-** used in the journal to signify that the remainder of the journal file
-** is devoted to storing a master journal name - there are no more pages to
-** roll back. See comments for function writeMasterJournal() in pager.c
-** for details.
-*/
-#define PAGER_MJ_PGNO(x) ((Pgno)((PENDING_BYTE/((x)->pageSize))+1))
-
-/*
-** Allowed values for the flags parameter to sqlite3PagerOpen().
-**
-** NOTE: These values must match the corresponding BTREE_ values in btree.h.
-*/
-#define PAGER_OMIT_JOURNAL 0x0001 /* Do not use a rollback journal */
-#define PAGER_MEMORY 0x0002 /* In-memory database */
-
-/*
-** Valid values for the second argument to sqlite3PagerLockingMode().
-*/
-#define PAGER_LOCKINGMODE_QUERY -1
-#define PAGER_LOCKINGMODE_NORMAL 0
-#define PAGER_LOCKINGMODE_EXCLUSIVE 1
-
-/*
-** Numeric constants that encode the journalmode.
-**
-** The numeric values encoded here (other than PAGER_JOURNALMODE_QUERY)
-** are exposed in the API via the "PRAGMA journal_mode" command and
-** therefore cannot be changed without a compatibility break.
-*/
-#define PAGER_JOURNALMODE_QUERY (-1) /* Query the value of journalmode */
-#define PAGER_JOURNALMODE_DELETE 0 /* Commit by deleting journal file */
-#define PAGER_JOURNALMODE_PERSIST 1 /* Commit by zeroing journal header */
-#define PAGER_JOURNALMODE_OFF 2 /* Journal omitted. */
-#define PAGER_JOURNALMODE_TRUNCATE 3 /* Commit by truncating journal */
-#define PAGER_JOURNALMODE_MEMORY 4 /* In-memory journal file */
-#define PAGER_JOURNALMODE_WAL 5 /* Use write-ahead logging */
-
-/*
-** Flags that make up the mask passed to sqlite3PagerGet().
-*/
-#define PAGER_GET_NOCONTENT 0x01 /* Do not load data from disk */
-#define PAGER_GET_READONLY 0x02 /* Read-only page is acceptable */
-
-/*
-** Flags for sqlite3PagerSetFlags()
-**
-** Value constraints (enforced via assert()):
-** PAGER_FULLFSYNC == SQLITE_FullFSync
-** PAGER_CKPT_FULLFSYNC == SQLITE_CkptFullFSync
-** PAGER_CACHE_SPILL == SQLITE_CacheSpill
-*/
-#define PAGER_SYNCHRONOUS_OFF 0x01 /* PRAGMA synchronous=OFF */
-#define PAGER_SYNCHRONOUS_NORMAL 0x02 /* PRAGMA synchronous=NORMAL */
-#define PAGER_SYNCHRONOUS_FULL 0x03 /* PRAGMA synchronous=FULL */
-#define PAGER_SYNCHRONOUS_EXTRA 0x04 /* PRAGMA synchronous=EXTRA */
-#define PAGER_SYNCHRONOUS_MASK 0x07 /* Mask for four values above */
-#define PAGER_FULLFSYNC 0x08 /* PRAGMA fullfsync=ON */
-#define PAGER_CKPT_FULLFSYNC 0x10 /* PRAGMA checkpoint_fullfsync=ON */
-#define PAGER_CACHESPILL 0x20 /* PRAGMA cache_spill=ON */
-#define PAGER_FLAGS_MASK 0x38 /* All above except SYNCHRONOUS */
-
-/*
-** The remainder of this file contains the declarations of the functions
-** that make up the Pager sub-system API. See source code comments for
-** a detailed description of each routine.
-*/
-
-/* Open and close a Pager connection. */
-SQLITE_PRIVATE int sqlite3PagerOpen(
- sqlite3_vfs*,
- Pager **ppPager,
- const char*,
- int,
- int,
- int,
- void(*)(DbPage*)
-);
-SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager);
-SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*);
-
-/* Functions used to configure a Pager object. */
-SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *);
-SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int);
-#ifdef SQLITE_HAS_CODEC
-SQLITE_PRIVATE void sqlite3PagerAlignReserve(Pager*,Pager*);
-#endif
-SQLITE_PRIVATE int sqlite3PagerMaxPageCount(Pager*, int);
-SQLITE_PRIVATE void sqlite3PagerSetCachesize(Pager*, int);
-SQLITE_PRIVATE int sqlite3PagerSetSpillsize(Pager*, int);
-SQLITE_PRIVATE void sqlite3PagerSetMmapLimit(Pager *, sqlite3_int64);
-SQLITE_PRIVATE void sqlite3PagerShrink(Pager*);
-SQLITE_PRIVATE void sqlite3PagerSetFlags(Pager*,unsigned);
-SQLITE_PRIVATE int sqlite3PagerLockingMode(Pager *, int);
-SQLITE_PRIVATE int sqlite3PagerSetJournalMode(Pager *, int);
-SQLITE_PRIVATE int sqlite3PagerGetJournalMode(Pager*);
-SQLITE_PRIVATE int sqlite3PagerOkToChangeJournalMode(Pager*);
-SQLITE_PRIVATE i64 sqlite3PagerJournalSizeLimit(Pager *, i64);
-SQLITE_PRIVATE sqlite3_backup **sqlite3PagerBackupPtr(Pager*);
-SQLITE_PRIVATE int sqlite3PagerFlush(Pager*);
-
-/* Functions used to obtain and release page references. */
-SQLITE_PRIVATE int sqlite3PagerGet(Pager *pPager, Pgno pgno, DbPage **ppPage, int clrFlag);
-SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno);
-SQLITE_PRIVATE void sqlite3PagerRef(DbPage*);
-SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*);
-SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*);
-
-/* Operations on page references. */
-SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*);
-SQLITE_PRIVATE void sqlite3PagerDontWrite(DbPage*);
-SQLITE_PRIVATE int sqlite3PagerMovepage(Pager*,DbPage*,Pgno,int);
-SQLITE_PRIVATE int sqlite3PagerPageRefcount(DbPage*);
-SQLITE_PRIVATE void *sqlite3PagerGetData(DbPage *);
-SQLITE_PRIVATE void *sqlite3PagerGetExtra(DbPage *);
-
-/* Functions used to manage pager transactions and savepoints. */
-SQLITE_PRIVATE void sqlite3PagerPagecount(Pager*, int*);
-SQLITE_PRIVATE int sqlite3PagerBegin(Pager*, int exFlag, int);
-SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne(Pager*,const char *zMaster, int);
-SQLITE_PRIVATE int sqlite3PagerExclusiveLock(Pager*);
-SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster);
-SQLITE_PRIVATE int sqlite3PagerCommitPhaseTwo(Pager*);
-SQLITE_PRIVATE int sqlite3PagerRollback(Pager*);
-SQLITE_PRIVATE int sqlite3PagerOpenSavepoint(Pager *pPager, int n);
-SQLITE_PRIVATE int sqlite3PagerSavepoint(Pager *pPager, int op, int iSavepoint);
-SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager);
-
-#ifndef SQLITE_OMIT_WAL
-SQLITE_PRIVATE int sqlite3PagerCheckpoint(Pager *pPager, int, int*, int*);
-SQLITE_PRIVATE int sqlite3PagerWalSupported(Pager *pPager);
-SQLITE_PRIVATE int sqlite3PagerWalCallback(Pager *pPager);
-SQLITE_PRIVATE int sqlite3PagerOpenWal(Pager *pPager, int *pisOpen);
-SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager);
-# ifdef SQLITE_ENABLE_SNAPSHOT
-SQLITE_PRIVATE int sqlite3PagerSnapshotGet(Pager *pPager, sqlite3_snapshot **ppSnapshot);
-SQLITE_PRIVATE int sqlite3PagerSnapshotOpen(Pager *pPager, sqlite3_snapshot *pSnapshot);
-# endif
-#endif
-
-#ifdef SQLITE_ENABLE_ZIPVFS
-SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager);
-#endif
-
-/* Functions used to query pager state and configuration. */
-SQLITE_PRIVATE u8 sqlite3PagerIsreadonly(Pager*);
-SQLITE_PRIVATE u32 sqlite3PagerDataVersion(Pager*);
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE int sqlite3PagerRefcount(Pager*);
-#endif
-SQLITE_PRIVATE int sqlite3PagerMemUsed(Pager*);
-SQLITE_PRIVATE const char *sqlite3PagerFilename(Pager*, int);
-SQLITE_PRIVATE sqlite3_vfs *sqlite3PagerVfs(Pager*);
-SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager*);
-SQLITE_PRIVATE sqlite3_file *sqlite3PagerJrnlFile(Pager*);
-SQLITE_PRIVATE const char *sqlite3PagerJournalname(Pager*);
-SQLITE_PRIVATE void *sqlite3PagerTempSpace(Pager*);
-SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*);
-SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *);
-SQLITE_PRIVATE void sqlite3PagerClearCache(Pager *);
-SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *);
-
-/* Functions used to truncate the database file. */
-SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno);
-
-SQLITE_PRIVATE void sqlite3PagerRekey(DbPage*, Pgno, u16);
-
-#if defined(SQLITE_HAS_CODEC) && !defined(SQLITE_OMIT_WAL)
-SQLITE_PRIVATE void *sqlite3PagerCodec(DbPage *);
-#endif
-
-/* Functions to support testing and debugging. */
-#if !defined(NDEBUG) || defined(SQLITE_TEST)
-SQLITE_PRIVATE Pgno sqlite3PagerPagenumber(DbPage*);
-SQLITE_PRIVATE int sqlite3PagerIswriteable(DbPage*);
-#endif
-#ifdef SQLITE_TEST
-SQLITE_PRIVATE int *sqlite3PagerStats(Pager*);
-SQLITE_PRIVATE void sqlite3PagerRefdump(Pager*);
- void disable_simulated_io_errors(void);
- void enable_simulated_io_errors(void);
-#else
-# define disable_simulated_io_errors()
-# define enable_simulated_io_errors()
-#endif
-
-#endif /* _PAGER_H_ */
-
-/************** End of pager.h ***********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include pcache.h in the middle of sqliteInt.h ****************/
-/************** Begin file pcache.h ******************************************/
-/*
-** 2008 August 05
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This header file defines the interface that the sqlite page cache
-** subsystem.
-*/
-
-#ifndef _PCACHE_H_
-
-typedef struct PgHdr PgHdr;
-typedef struct PCache PCache;
-
-/*
-** Every page in the cache is controlled by an instance of the following
-** structure.
-*/
-struct PgHdr {
- sqlite3_pcache_page *pPage; /* Pcache object page handle */
- void *pData; /* Page data */
- void *pExtra; /* Extra content */
- PgHdr *pDirty; /* Transient list of dirty sorted by pgno */
- Pager *pPager; /* The pager this page is part of */
- Pgno pgno; /* Page number for this page */
-#ifdef SQLITE_CHECK_PAGES
- u32 pageHash; /* Hash of page content */
-#endif
- u16 flags; /* PGHDR flags defined below */
-
- /**********************************************************************
- ** Elements above are public. All that follows is private to pcache.c
- ** and should not be accessed by other modules.
- */
- i16 nRef; /* Number of users of this page */
- PCache *pCache; /* Cache that owns this page */
-
- PgHdr *pDirtyNext; /* Next element in list of dirty pages */
- PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */
-};
-
-/* Bit values for PgHdr.flags */
-#define PGHDR_CLEAN 0x001 /* Page not on the PCache.pDirty list */
-#define PGHDR_DIRTY 0x002 /* Page is on the PCache.pDirty list */
-#define PGHDR_WRITEABLE 0x004 /* Journaled and ready to modify */
-#define PGHDR_NEED_SYNC 0x008 /* Fsync the rollback journal before
- ** writing this page to the database */
-#define PGHDR_DONT_WRITE 0x010 /* Do not write content to disk */
-#define PGHDR_MMAP 0x020 /* This is an mmap page object */
-
-#define PGHDR_WAL_APPEND 0x040 /* Appended to wal file */
-
-/* Initialize and shutdown the page cache subsystem */
-SQLITE_PRIVATE int sqlite3PcacheInitialize(void);
-SQLITE_PRIVATE void sqlite3PcacheShutdown(void);
-
-/* Page cache buffer management:
-** These routines implement SQLITE_CONFIG_PAGECACHE.
-*/
-SQLITE_PRIVATE void sqlite3PCacheBufferSetup(void *, int sz, int n);
-
-/* Create a new pager cache.
-** Under memory stress, invoke xStress to try to make pages clean.
-** Only clean and unpinned pages can be reclaimed.
-*/
-SQLITE_PRIVATE int sqlite3PcacheOpen(
- int szPage, /* Size of every page */
- int szExtra, /* Extra space associated with each page */
- int bPurgeable, /* True if pages are on backing store */
- int (*xStress)(void*, PgHdr*), /* Call to try to make pages clean */
- void *pStress, /* Argument to xStress */
- PCache *pToInit /* Preallocated space for the PCache */
-);
-
-/* Modify the page-size after the cache has been created. */
-SQLITE_PRIVATE int sqlite3PcacheSetPageSize(PCache *, int);
-
-/* Return the size in bytes of a PCache object. Used to preallocate
-** storage space.
-*/
-SQLITE_PRIVATE int sqlite3PcacheSize(void);
-
-/* One release per successful fetch. Page is pinned until released.
-** Reference counted.
-*/
-SQLITE_PRIVATE sqlite3_pcache_page *sqlite3PcacheFetch(PCache*, Pgno, int createFlag);
-SQLITE_PRIVATE int sqlite3PcacheFetchStress(PCache*, Pgno, sqlite3_pcache_page**);
-SQLITE_PRIVATE PgHdr *sqlite3PcacheFetchFinish(PCache*, Pgno, sqlite3_pcache_page *pPage);
-SQLITE_PRIVATE void sqlite3PcacheRelease(PgHdr*);
-
-SQLITE_PRIVATE void sqlite3PcacheDrop(PgHdr*); /* Remove page from cache */
-SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr*); /* Make sure page is marked dirty */
-SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr*); /* Mark a single page as clean */
-SQLITE_PRIVATE void sqlite3PcacheCleanAll(PCache*); /* Mark all dirty list pages as clean */
-SQLITE_PRIVATE void sqlite3PcacheClearWritable(PCache*);
-
-/* Change a page number. Used by incr-vacuum. */
-SQLITE_PRIVATE void sqlite3PcacheMove(PgHdr*, Pgno);
-
-/* Remove all pages with pgno>x. Reset the cache if x==0 */
-SQLITE_PRIVATE void sqlite3PcacheTruncate(PCache*, Pgno x);
-
-/* Get a list of all dirty pages in the cache, sorted by page number */
-SQLITE_PRIVATE PgHdr *sqlite3PcacheDirtyList(PCache*);
-
-/* Reset and close the cache object */
-SQLITE_PRIVATE void sqlite3PcacheClose(PCache*);
-
-/* Clear flags from pages of the page cache */
-SQLITE_PRIVATE void sqlite3PcacheClearSyncFlags(PCache *);
-
-/* Discard the contents of the cache */
-SQLITE_PRIVATE void sqlite3PcacheClear(PCache*);
-
-/* Return the total number of outstanding page references */
-SQLITE_PRIVATE int sqlite3PcacheRefCount(PCache*);
-
-/* Increment the reference count of an existing page */
-SQLITE_PRIVATE void sqlite3PcacheRef(PgHdr*);
-
-SQLITE_PRIVATE int sqlite3PcachePageRefcount(PgHdr*);
-
-/* Return the total number of pages stored in the cache */
-SQLITE_PRIVATE int sqlite3PcachePagecount(PCache*);
-
-#if defined(SQLITE_CHECK_PAGES) || defined(SQLITE_DEBUG)
-/* Iterate through all dirty pages currently stored in the cache. This
-** interface is only available if SQLITE_CHECK_PAGES is defined when the
-** library is built.
-*/
-SQLITE_PRIVATE void sqlite3PcacheIterateDirty(PCache *pCache, void (*xIter)(PgHdr *));
-#endif
-
-#if defined(SQLITE_DEBUG)
-/* Check invariants on a PgHdr object */
-SQLITE_PRIVATE int sqlite3PcachePageSanity(PgHdr*);
-#endif
-
-/* Set and get the suggested cache-size for the specified pager-cache.
-**
-** If no global maximum is configured, then the system attempts to limit
-** the total number of pages cached by purgeable pager-caches to the sum
-** of the suggested cache-sizes.
-*/
-SQLITE_PRIVATE void sqlite3PcacheSetCachesize(PCache *, int);
-#ifdef SQLITE_TEST
-SQLITE_PRIVATE int sqlite3PcacheGetCachesize(PCache *);
-#endif
-
-/* Set or get the suggested spill-size for the specified pager-cache.
-**
-** The spill-size is the minimum number of pages in cache before the cache
-** will attempt to spill dirty pages by calling xStress.
-*/
-SQLITE_PRIVATE int sqlite3PcacheSetSpillsize(PCache *, int);
-
-/* Free up as much memory as possible from the page cache */
-SQLITE_PRIVATE void sqlite3PcacheShrink(PCache*);
-
-#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
-/* Try to return memory used by the pcache module to the main memory heap */
-SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int);
-#endif
-
-#ifdef SQLITE_TEST
-SQLITE_PRIVATE void sqlite3PcacheStats(int*,int*,int*,int*);
-#endif
-
-SQLITE_PRIVATE void sqlite3PCacheSetDefault(void);
-
-/* Return the header size */
-SQLITE_PRIVATE int sqlite3HeaderSizePcache(void);
-SQLITE_PRIVATE int sqlite3HeaderSizePcache1(void);
-
-/* Number of dirty pages as a percentage of the configured cache size */
-SQLITE_PRIVATE int sqlite3PCachePercentDirty(PCache*);
-
-#endif /* _PCACHE_H_ */
-
-/************** End of pcache.h **********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include os.h in the middle of sqliteInt.h ********************/
-/************** Begin file os.h **********************************************/
-/*
-** 2001 September 16
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This header file (together with is companion C source-code file
-** "os.c") attempt to abstract the underlying operating system so that
-** the SQLite library will work on both POSIX and windows systems.
-**
-** This header file is #include-ed by sqliteInt.h and thus ends up
-** being included by every source file.
-*/
-#ifndef _SQLITE_OS_H_
-#define _SQLITE_OS_H_
-
-/*
-** Attempt to automatically detect the operating system and setup the
-** necessary pre-processor macros for it.
-*/
-/************** Include os_setup.h in the middle of os.h *********************/
-/************** Begin file os_setup.h ****************************************/
-/*
-** 2013 November 25
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains pre-processor directives related to operating system
-** detection and/or setup.
-*/
-#ifndef _OS_SETUP_H_
-#define _OS_SETUP_H_
-
-/*
-** Figure out if we are dealing with Unix, Windows, or some other operating
-** system.
-**
-** After the following block of preprocess macros, all of SQLITE_OS_UNIX,
-** SQLITE_OS_WIN, and SQLITE_OS_OTHER will defined to either 1 or 0. One of
-** the three will be 1. The other two will be 0.
-*/
-#if defined(SQLITE_OS_OTHER)
-# if SQLITE_OS_OTHER==1
-# undef SQLITE_OS_UNIX
-# define SQLITE_OS_UNIX 0
-# undef SQLITE_OS_WIN
-# define SQLITE_OS_WIN 0
-# else
-# undef SQLITE_OS_OTHER
-# endif
-#endif
-#if !defined(SQLITE_OS_UNIX) && !defined(SQLITE_OS_OTHER)
-# define SQLITE_OS_OTHER 0
-# ifndef SQLITE_OS_WIN
-# if defined(_WIN32) || defined(WIN32) || defined(__CYGWIN__) || \
- defined(__MINGW32__) || defined(__BORLANDC__)
-# define SQLITE_OS_WIN 1
-# define SQLITE_OS_UNIX 0
-# else
-# define SQLITE_OS_WIN 0
-# define SQLITE_OS_UNIX 1
-# endif
-# else
-# define SQLITE_OS_UNIX 0
-# endif
-#else
-# ifndef SQLITE_OS_WIN
-# define SQLITE_OS_WIN 0
-# endif
-#endif
-
-#endif /* _OS_SETUP_H_ */
-
-/************** End of os_setup.h ********************************************/
-/************** Continuing where we left off in os.h *************************/
-
-/* If the SET_FULLSYNC macro is not defined above, then make it
-** a no-op
-*/
-#ifndef SET_FULLSYNC
-# define SET_FULLSYNC(x,y)
-#endif
-
-/*
-** The default size of a disk sector
-*/
-#ifndef SQLITE_DEFAULT_SECTOR_SIZE
-# define SQLITE_DEFAULT_SECTOR_SIZE 4096
-#endif
-
-/*
-** Temporary files are named starting with this prefix followed by 16 random
-** alphanumeric characters, and no file extension. They are stored in the
-** OS's standard temporary file directory, and are deleted prior to exit.
-** If sqlite is being embedded in another program, you may wish to change the
-** prefix to reflect your program's name, so that if your program exits
-** prematurely, old temporary files can be easily identified. This can be done
-** using -DSQLITE_TEMP_FILE_PREFIX=myprefix_ on the compiler command line.
-**
-** 2006-10-31: The default prefix used to be "sqlite_". But then
-** Mcafee started using SQLite in their anti-virus product and it
-** started putting files with the "sqlite" name in the c:/temp folder.
-** This annoyed many windows users. Those users would then do a
-** Google search for "sqlite", find the telephone numbers of the
-** developers and call to wake them up at night and complain.
-** For this reason, the default name prefix is changed to be "sqlite"
-** spelled backwards. So the temp files are still identified, but
-** anybody smart enough to figure out the code is also likely smart
-** enough to know that calling the developer will not help get rid
-** of the file.
-*/
-#ifndef SQLITE_TEMP_FILE_PREFIX
-# define SQLITE_TEMP_FILE_PREFIX "etilqs_"
-#endif
-
-/*
-** The following values may be passed as the second argument to
-** sqlite3OsLock(). The various locks exhibit the following semantics:
-**
-** SHARED: Any number of processes may hold a SHARED lock simultaneously.
-** RESERVED: A single process may hold a RESERVED lock on a file at
-** any time. Other processes may hold and obtain new SHARED locks.
-** PENDING: A single process may hold a PENDING lock on a file at
-** any one time. Existing SHARED locks may persist, but no new
-** SHARED locks may be obtained by other processes.
-** EXCLUSIVE: An EXCLUSIVE lock precludes all other locks.
-**
-** PENDING_LOCK may not be passed directly to sqlite3OsLock(). Instead, a
-** process that requests an EXCLUSIVE lock may actually obtain a PENDING
-** lock. This can be upgraded to an EXCLUSIVE lock by a subsequent call to
-** sqlite3OsLock().
-*/
-#define NO_LOCK 0
-#define SHARED_LOCK 1
-#define RESERVED_LOCK 2
-#define PENDING_LOCK 3
-#define EXCLUSIVE_LOCK 4
-
-/*
-** File Locking Notes: (Mostly about windows but also some info for Unix)
-**
-** We cannot use LockFileEx() or UnlockFileEx() on Win95/98/ME because
-** those functions are not available. So we use only LockFile() and
-** UnlockFile().
-**
-** LockFile() prevents not just writing but also reading by other processes.
-** A SHARED_LOCK is obtained by locking a single randomly-chosen
-** byte out of a specific range of bytes. The lock byte is obtained at
-** random so two separate readers can probably access the file at the
-** same time, unless they are unlucky and choose the same lock byte.
-** An EXCLUSIVE_LOCK is obtained by locking all bytes in the range.
-** There can only be one writer. A RESERVED_LOCK is obtained by locking
-** a single byte of the file that is designated as the reserved lock byte.
-** A PENDING_LOCK is obtained by locking a designated byte different from
-** the RESERVED_LOCK byte.
-**
-** On WinNT/2K/XP systems, LockFileEx() and UnlockFileEx() are available,
-** which means we can use reader/writer locks. When reader/writer locks
-** are used, the lock is placed on the same range of bytes that is used
-** for probabilistic locking in Win95/98/ME. Hence, the locking scheme
-** will support two or more Win95 readers or two or more WinNT readers.
-** But a single Win95 reader will lock out all WinNT readers and a single
-** WinNT reader will lock out all other Win95 readers.
-**
-** The following #defines specify the range of bytes used for locking.
-** SHARED_SIZE is the number of bytes available in the pool from which
-** a random byte is selected for a shared lock. The pool of bytes for
-** shared locks begins at SHARED_FIRST.
-**
-** The same locking strategy and
-** byte ranges are used for Unix. This leaves open the possibility of having
-** clients on win95, winNT, and unix all talking to the same shared file
-** and all locking correctly. To do so would require that samba (or whatever
-** tool is being used for file sharing) implements locks correctly between
-** windows and unix. I'm guessing that isn't likely to happen, but by
-** using the same locking range we are at least open to the possibility.
-**
-** Locking in windows is manditory. For this reason, we cannot store
-** actual data in the bytes used for locking. The pager never allocates
-** the pages involved in locking therefore. SHARED_SIZE is selected so
-** that all locks will fit on a single page even at the minimum page size.
-** PENDING_BYTE defines the beginning of the locks. By default PENDING_BYTE
-** is set high so that we don't have to allocate an unused page except
-** for very large databases. But one should test the page skipping logic
-** by setting PENDING_BYTE low and running the entire regression suite.
-**
-** Changing the value of PENDING_BYTE results in a subtly incompatible
-** file format. Depending on how it is changed, you might not notice
-** the incompatibility right away, even running a full regression test.
-** The default location of PENDING_BYTE is the first byte past the
-** 1GB boundary.
-**
-*/
-#ifdef SQLITE_OMIT_WSD
-# define PENDING_BYTE (0x40000000)
-#else
-# define PENDING_BYTE sqlite3PendingByte
-#endif
-#define RESERVED_BYTE (PENDING_BYTE+1)
-#define SHARED_FIRST (PENDING_BYTE+2)
-#define SHARED_SIZE 510
-
-/*
-** Wrapper around OS specific sqlite3_os_init() function.
-*/
-SQLITE_PRIVATE int sqlite3OsInit(void);
-
-/*
-** Functions for accessing sqlite3_file methods
-*/
-SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file*);
-SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file*, void*, int amt, i64 offset);
-SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file*, const void*, int amt, i64 offset);
-SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file*, i64 size);
-SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file*, int);
-SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file*, i64 *pSize);
-SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file*, int);
-SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file*, int);
-SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut);
-SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file*,int,void*);
-SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file*,int,void*);
-#define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0
-SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id);
-SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id);
-SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **);
-SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int);
-SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id);
-SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int);
-SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **);
-SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *);
-
-
-/*
-** Functions for accessing sqlite3_vfs methods
-*/
-SQLITE_PRIVATE int sqlite3OsOpen(sqlite3_vfs *, const char *, sqlite3_file*, int, int *);
-SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *, const char *, int);
-SQLITE_PRIVATE int sqlite3OsAccess(sqlite3_vfs *, const char *, int, int *pResOut);
-SQLITE_PRIVATE int sqlite3OsFullPathname(sqlite3_vfs *, const char *, int, char *);
-#ifndef SQLITE_OMIT_LOAD_EXTENSION
-SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *, const char *);
-SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *, int, char *);
-SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *, void *, const char *))(void);
-SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *, void *);
-#endif /* SQLITE_OMIT_LOAD_EXTENSION */
-SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *, int, char *);
-SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *, int);
-SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs*);
-SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *, sqlite3_int64*);
-
-/*
-** Convenience functions for opening and closing files using
-** sqlite3_malloc() to obtain space for the file-handle structure.
-*/
-SQLITE_PRIVATE int sqlite3OsOpenMalloc(sqlite3_vfs *, const char *, sqlite3_file **, int,int*);
-SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *);
-
-#endif /* _SQLITE_OS_H_ */
-
-/************** End of os.h **************************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-/************** Include mutex.h in the middle of sqliteInt.h *****************/
-/************** Begin file mutex.h *******************************************/
-/*
-** 2007 August 28
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains the common header for all mutex implementations.
-** The sqliteInt.h header #includes this file so that it is available
-** to all source files. We break it out in an effort to keep the code
-** better organized.
-**
-** NOTE: source files should *not* #include this header file directly.
-** Source files should #include the sqliteInt.h file and let that file
-** include this one indirectly.
-*/
-
-
-/*
-** Figure out what version of the code to use. The choices are
-**
-** SQLITE_MUTEX_OMIT No mutex logic. Not even stubs. The
-** mutexes implementation cannot be overridden
-** at start-time.
-**
-** SQLITE_MUTEX_NOOP For single-threaded applications. No
-** mutual exclusion is provided. But this
-** implementation can be overridden at
-** start-time.
-**
-** SQLITE_MUTEX_PTHREADS For multi-threaded applications on Unix.
-**
-** SQLITE_MUTEX_W32 For multi-threaded applications on Win32.
-*/
-#if !SQLITE_THREADSAFE
-# define SQLITE_MUTEX_OMIT
-#endif
-#if SQLITE_THREADSAFE && !defined(SQLITE_MUTEX_NOOP)
-# if SQLITE_OS_UNIX
-# define SQLITE_MUTEX_PTHREADS
-# elif SQLITE_OS_WIN
-# define SQLITE_MUTEX_W32
-# else
-# define SQLITE_MUTEX_NOOP
-# endif
-#endif
-
-#ifdef SQLITE_MUTEX_OMIT
-/*
-** If this is a no-op implementation, implement everything as macros.
-*/
-#define sqlite3_mutex_alloc(X) ((sqlite3_mutex*)8)
-#define sqlite3_mutex_free(X)
-#define sqlite3_mutex_enter(X)
-#define sqlite3_mutex_try(X) SQLITE_OK
-#define sqlite3_mutex_leave(X)
-#define sqlite3_mutex_held(X) ((void)(X),1)
-#define sqlite3_mutex_notheld(X) ((void)(X),1)
-#define sqlite3MutexAlloc(X) ((sqlite3_mutex*)8)
-#define sqlite3MutexInit() SQLITE_OK
-#define sqlite3MutexEnd()
-#define MUTEX_LOGIC(X)
-#else
-#define MUTEX_LOGIC(X) X
-#endif /* defined(SQLITE_MUTEX_OMIT) */
-
-/************** End of mutex.h ***********************************************/
-/************** Continuing where we left off in sqliteInt.h ******************/
-
-/* The SQLITE_EXTRA_DURABLE compile-time option used to set the default
-** synchronous setting to EXTRA. It is no longer supported.
-*/
-#ifdef SQLITE_EXTRA_DURABLE
-# warning Use SQLITE_DEFAULT_SYNCHRONOUS=3 instead of SQLITE_EXTRA_DURABLE
-# define SQLITE_DEFAULT_SYNCHRONOUS 3
-#endif
-
-/*
-** Default synchronous levels.
-**
-** Note that (for historcal reasons) the PAGER_SYNCHRONOUS_* macros differ
-** from the SQLITE_DEFAULT_SYNCHRONOUS value by 1.
-**
-** PAGER_SYNCHRONOUS DEFAULT_SYNCHRONOUS
-** OFF 1 0
-** NORMAL 2 1
-** FULL 3 2
-** EXTRA 4 3
-**
-** The "PRAGMA synchronous" statement also uses the zero-based numbers.
-** In other words, the zero-based numbers are used for all external interfaces
-** and the one-based values are used internally.
-*/
-#ifndef SQLITE_DEFAULT_SYNCHRONOUS
-# define SQLITE_DEFAULT_SYNCHRONOUS (PAGER_SYNCHRONOUS_FULL-1)
-#endif
-#ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS
-# define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS
-#endif
-
-/*
-** Each database file to be accessed by the system is an instance
-** of the following structure. There are normally two of these structures
-** in the sqlite.aDb[] array. aDb[0] is the main database file and
-** aDb[1] is the database file used to hold temporary tables. Additional
-** databases may be attached.
-*/
-struct Db {
- char *zName; /* Name of this database */
- Btree *pBt; /* The B*Tree structure for this database file */
- u8 safety_level; /* How aggressive at syncing data to disk */
- u8 bSyncSet; /* True if "PRAGMA synchronous=N" has been run */
- Schema *pSchema; /* Pointer to database schema (possibly shared) */
-};
-
-/*
-** An instance of the following structure stores a database schema.
-**
-** Most Schema objects are associated with a Btree. The exception is
-** the Schema for the TEMP databaes (sqlite3.aDb[1]) which is free-standing.
-** In shared cache mode, a single Schema object can be shared by multiple
-** Btrees that refer to the same underlying BtShared object.
-**
-** Schema objects are automatically deallocated when the last Btree that
-** references them is destroyed. The TEMP Schema is manually freed by
-** sqlite3_close().
-*
-** A thread must be holding a mutex on the corresponding Btree in order
-** to access Schema content. This implies that the thread must also be
-** holding a mutex on the sqlite3 connection pointer that owns the Btree.
-** For a TEMP Schema, only the connection mutex is required.
-*/
-struct Schema {
- int schema_cookie; /* Database schema version number for this file */
- int iGeneration; /* Generation counter. Incremented with each change */
- Hash tblHash; /* All tables indexed by name */
- Hash idxHash; /* All (named) indices indexed by name */
- Hash trigHash; /* All triggers indexed by name */
- Hash fkeyHash; /* All foreign keys by referenced table name */
- Table *pSeqTab; /* The sqlite_sequence table used by AUTOINCREMENT */
- u8 file_format; /* Schema format version for this file */
- u8 enc; /* Text encoding used by this database */
- u16 schemaFlags; /* Flags associated with this schema */
- int cache_size; /* Number of pages to use in the cache */
-};
-
-/*
-** These macros can be used to test, set, or clear bits in the
-** Db.pSchema->flags field.
-*/
-#define DbHasProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))==(P))
-#define DbHasAnyProperty(D,I,P) (((D)->aDb[I].pSchema->schemaFlags&(P))!=0)
-#define DbSetProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags|=(P)
-#define DbClearProperty(D,I,P) (D)->aDb[I].pSchema->schemaFlags&=~(P)
-
-/*
-** Allowed values for the DB.pSchema->flags field.
-**
-** The DB_SchemaLoaded flag is set after the database schema has been
-** read into internal hash tables.
-**
-** DB_UnresetViews means that one or more views have column names that
-** have been filled out. If the schema changes, these column names might
-** changes and so the view will need to be reset.
-*/
-#define DB_SchemaLoaded 0x0001 /* The schema has been loaded */
-#define DB_UnresetViews 0x0002 /* Some views have defined column names */
-#define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */
-
-/*
-** The number of different kinds of things that can be limited
-** using the sqlite3_limit() interface.
-*/
-#define SQLITE_N_LIMIT (SQLITE_LIMIT_WORKER_THREADS+1)
-
-/*
-** Lookaside malloc is a set of fixed-size buffers that can be used
-** to satisfy small transient memory allocation requests for objects
-** associated with a particular database connection. The use of
-** lookaside malloc provides a significant performance enhancement
-** (approx 10%) by avoiding numerous malloc/free requests while parsing
-** SQL statements.
-**
-** The Lookaside structure holds configuration information about the
-** lookaside malloc subsystem. Each available memory allocation in
-** the lookaside subsystem is stored on a linked list of LookasideSlot
-** objects.
-**
-** Lookaside allocations are only allowed for objects that are associated
-** with a particular database connection. Hence, schema information cannot
-** be stored in lookaside because in shared cache mode the schema information
-** is shared by multiple database connections. Therefore, while parsing
-** schema information, the Lookaside.bEnabled flag is cleared so that
-** lookaside allocations are not used to construct the schema objects.
-*/
-struct Lookaside {
- u32 bDisable; /* Only operate the lookaside when zero */
- u16 sz; /* Size of each buffer in bytes */
- u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */
- int nOut; /* Number of buffers currently checked out */
- int mxOut; /* Highwater mark for nOut */
- int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */
- LookasideSlot *pFree; /* List of available buffers */
- void *pStart; /* First byte of available memory space */
- void *pEnd; /* First byte past end of available space */
-};
-struct LookasideSlot {
- LookasideSlot *pNext; /* Next buffer in the list of free buffers */
-};
-
-/*
-** A hash table for built-in function definitions. (Application-defined
-** functions use a regular table table from hash.h.)
-**
-** Hash each FuncDef structure into one of the FuncDefHash.a[] slots.
-** Collisions are on the FuncDef.u.pHash chain.
-*/
-#define SQLITE_FUNC_HASH_SZ 23
-struct FuncDefHash {
- FuncDef *a[SQLITE_FUNC_HASH_SZ]; /* Hash table for functions */
-};
-
-#ifdef SQLITE_USER_AUTHENTICATION
-/*
-** Information held in the "sqlite3" database connection object and used
-** to manage user authentication.
-*/
-typedef struct sqlite3_userauth sqlite3_userauth;
-struct sqlite3_userauth {
- u8 authLevel; /* Current authentication level */
- int nAuthPW; /* Size of the zAuthPW in bytes */
- char *zAuthPW; /* Password used to authenticate */
- char *zAuthUser; /* User name used to authenticate */
-};
-
-/* Allowed values for sqlite3_userauth.authLevel */
-#define UAUTH_Unknown 0 /* Authentication not yet checked */
-#define UAUTH_Fail 1 /* User authentication failed */
-#define UAUTH_User 2 /* Authenticated as a normal user */
-#define UAUTH_Admin 3 /* Authenticated as an administrator */
-
-/* Functions used only by user authorization logic */
-SQLITE_PRIVATE int sqlite3UserAuthTable(const char*);
-SQLITE_PRIVATE int sqlite3UserAuthCheckLogin(sqlite3*,const char*,u8*);
-SQLITE_PRIVATE void sqlite3UserAuthInit(sqlite3*);
-SQLITE_PRIVATE void sqlite3CryptFunc(sqlite3_context*,int,sqlite3_value**);
-
-#endif /* SQLITE_USER_AUTHENTICATION */
-
-/*
-** typedef for the authorization callback function.
-*/
-#ifdef SQLITE_USER_AUTHENTICATION
- typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*,
- const char*, const char*);
-#else
- typedef int (*sqlite3_xauth)(void*,int,const char*,const char*,const char*,
- const char*);
-#endif
-
-
-/*
-** Each database connection is an instance of the following structure.
-*/
-struct sqlite3 {
- sqlite3_vfs *pVfs; /* OS Interface */
- struct Vdbe *pVdbe; /* List of active virtual machines */
- CollSeq *pDfltColl; /* The default collating sequence (BINARY) */
- sqlite3_mutex *mutex; /* Connection mutex */
- Db *aDb; /* All backends */
- int nDb; /* Number of backends currently in use */
- int flags; /* Miscellaneous flags. See below */
- i64 lastRowid; /* ROWID of most recent insert (see above) */
- i64 szMmap; /* Default mmap_size setting */
- unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */
- int errCode; /* Most recent error code (SQLITE_*) */
- int errMask; /* & result codes with this before returning */
- int iSysErrno; /* Errno value from last system error */
- u16 dbOptFlags; /* Flags to enable/disable optimizations */
- u8 enc; /* Text encoding */
- u8 autoCommit; /* The auto-commit flag. */
- u8 temp_store; /* 1: file 2: memory 0: default */
- u8 mallocFailed; /* True if we have seen a malloc failure */
- u8 bBenignMalloc; /* Do not require OOMs if true */
- u8 dfltLockMode; /* Default locking-mode for attached dbs */
- signed char nextAutovac; /* Autovac setting after VACUUM if >=0 */
- u8 suppressErr; /* Do not issue error messages if true */
- u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */
- u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */
- int nextPagesize; /* Pagesize after VACUUM if >0 */
- u32 magic; /* Magic number for detect library misuse */
- int nChange; /* Value returned by sqlite3_changes() */
- int nTotalChange; /* Value returned by sqlite3_total_changes() */
- int aLimit[SQLITE_N_LIMIT]; /* Limits */
- int nMaxSorterMmap; /* Maximum size of regions mapped by sorter */
- struct sqlite3InitInfo { /* Information used during initialization */
- int newTnum; /* Rootpage of table being initialized */
- u8 iDb; /* Which db file is being initialized */
- u8 busy; /* TRUE if currently initializing */
- u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */
- u8 imposterTable; /* Building an imposter table */
- } init;
- int nVdbeActive; /* Number of VDBEs currently running */
- int nVdbeRead; /* Number of active VDBEs that read or write */
- int nVdbeWrite; /* Number of active VDBEs that read and write */
- int nVdbeExec; /* Number of nested calls to VdbeExec() */
- int nVDestroy; /* Number of active OP_VDestroy operations */
- int nExtension; /* Number of loaded extensions */
- void **aExtension; /* Array of shared library handles */
- void (*xTrace)(void*,const char*); /* Trace function */
- void *pTraceArg; /* Argument to the trace function */
- void (*xProfile)(void*,const char*,u64); /* Profiling function */
- void *pProfileArg; /* Argument to profile function */
- void *pCommitArg; /* Argument to xCommitCallback() */
- int (*xCommitCallback)(void*); /* Invoked at every commit. */
- void *pRollbackArg; /* Argument to xRollbackCallback() */
- void (*xRollbackCallback)(void*); /* Invoked at every commit. */
- void *pUpdateArg;
- void (*xUpdateCallback)(void*,int, const char*,const char*,sqlite_int64);
-#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
- void *pPreUpdateArg; /* First argument to xPreUpdateCallback */
- void (*xPreUpdateCallback)( /* Registered using sqlite3_preupdate_hook() */
- void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64
- );
- PreUpdate *pPreUpdate; /* Context for active pre-update callback */
-#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */
-#ifndef SQLITE_OMIT_WAL
- int (*xWalCallback)(void *, sqlite3 *, const char *, int);
- void *pWalArg;
-#endif
- void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*);
- void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*);
- void *pCollNeededArg;
- sqlite3_value *pErr; /* Most recent error message */
- union {
- volatile int isInterrupted; /* True if sqlite3_interrupt has been called */
- double notUsed1; /* Spacer */
- } u1;
- Lookaside lookaside; /* Lookaside malloc configuration */
-#ifndef SQLITE_OMIT_AUTHORIZATION
- sqlite3_xauth xAuth; /* Access authorization function */
- void *pAuthArg; /* 1st argument to the access auth function */
-#endif
-#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
- int (*xProgress)(void *); /* The progress callback */
- void *pProgressArg; /* Argument to the progress callback */
- unsigned nProgressOps; /* Number of opcodes for progress callback */
-#endif
-#ifndef SQLITE_OMIT_VIRTUALTABLE
- int nVTrans; /* Allocated size of aVTrans */
- Hash aModule; /* populated by sqlite3_create_module() */
- VtabCtx *pVtabCtx; /* Context for active vtab connect/create */
- VTable **aVTrans; /* Virtual tables with open transactions */
- VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */
-#endif
- Hash aFunc; /* Hash table of connection functions */
- Hash aCollSeq; /* All collating sequences */
- BusyHandler busyHandler; /* Busy callback */
- Db aDbStatic[2]; /* Static space for the 2 default backends */
- Savepoint *pSavepoint; /* List of active savepoints */
- int busyTimeout; /* Busy handler timeout, in msec */
- int nSavepoint; /* Number of non-transaction savepoints */
- int nStatement; /* Number of nested statement-transactions */
- i64 nDeferredCons; /* Net deferred constraints this transaction. */
- i64 nDeferredImmCons; /* Net deferred immediate constraints */
- int *pnBytesFreed; /* If not NULL, increment this in DbFree() */
-#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
- /* The following variables are all protected by the STATIC_MASTER
- ** mutex, not by sqlite3.mutex. They are used by code in notify.c.
- **
- ** When X.pUnlockConnection==Y, that means that X is waiting for Y to
- ** unlock so that it can proceed.
- **
- ** When X.pBlockingConnection==Y, that means that something that X tried
- ** tried to do recently failed with an SQLITE_LOCKED error due to locks
- ** held by Y.
- */
- sqlite3 *pBlockingConnection; /* Connection that caused SQLITE_LOCKED */
- sqlite3 *pUnlockConnection; /* Connection to watch for unlock */
- void *pUnlockArg; /* Argument to xUnlockNotify */
- void (*xUnlockNotify)(void **, int); /* Unlock notify callback */
- sqlite3 *pNextBlocked; /* Next in list of all blocked connections */
-#endif
-#ifdef SQLITE_USER_AUTHENTICATION
- sqlite3_userauth auth; /* User authentication information */
-#endif
-};
-
-/*
-** A macro to discover the encoding of a database.
-*/
-#define SCHEMA_ENC(db) ((db)->aDb[0].pSchema->enc)
-#define ENC(db) ((db)->enc)
-
-/*
-** Possible values for the sqlite3.flags.
-**
-** Value constraints (enforced via assert()):
-** SQLITE_FullFSync == PAGER_FULLFSYNC
-** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC
-** SQLITE_CacheSpill == PAGER_CACHE_SPILL
-*/
-#define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */
-#define SQLITE_InternChanges 0x00000002 /* Uncommitted Hash table changes */
-#define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */
-#define SQLITE_FullFSync 0x00000008 /* Use full fsync on the backend */
-#define SQLITE_CkptFullFSync 0x00000010 /* Use full fsync for checkpoint */
-#define SQLITE_CacheSpill 0x00000020 /* OK to spill pager cache */
-#define SQLITE_ShortColNames 0x00000040 /* Show short columns names */
-#define SQLITE_CountRows 0x00000080 /* Count rows changed by INSERT, */
- /* DELETE, or UPDATE and return */
- /* the count using a callback. */
-#define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */
- /* result set is empty */
-#define SQLITE_SqlTrace 0x00000200 /* Debug print SQL as it executes */
-#define SQLITE_VdbeListing 0x00000400 /* Debug listings of VDBE programs */
-#define SQLITE_WriteSchema 0x00000800 /* OK to update SQLITE_MASTER */
-#define SQLITE_VdbeAddopTrace 0x00001000 /* Trace sqlite3VdbeAddOp() calls */
-#define SQLITE_IgnoreChecks 0x00002000 /* Do not enforce check constraints */
-#define SQLITE_ReadUncommitted 0x0004000 /* For shared-cache mode */
-#define SQLITE_LegacyFileFmt 0x00008000 /* Create new databases in format 1 */
-#define SQLITE_RecoveryMode 0x00010000 /* Ignore schema errors */
-#define SQLITE_ReverseOrder 0x00020000 /* Reverse unordered SELECTs */
-#define SQLITE_RecTriggers 0x00040000 /* Enable recursive triggers */
-#define SQLITE_ForeignKeys 0x00080000 /* Enforce foreign key constraints */
-#define SQLITE_AutoIndex 0x00100000 /* Enable automatic indexes */
-#define SQLITE_PreferBuiltin 0x00200000 /* Preference to built-in funcs */
-#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */
-#define SQLITE_LoadExtFunc 0x00800000 /* Enable load_extension() SQL func */
-#define SQLITE_EnableTrigger 0x01000000 /* True to enable triggers */
-#define SQLITE_DeferFKs 0x02000000 /* Defer all FK constraints */
-#define SQLITE_QueryOnly 0x04000000 /* Disable database changes */
-#define SQLITE_VdbeEQP 0x08000000 /* Debug EXPLAIN QUERY PLAN */
-#define SQLITE_Vacuum 0x10000000 /* Currently in a VACUUM */
-#define SQLITE_CellSizeCk 0x20000000 /* Check btree cell sizes on load */
-#define SQLITE_Fts3Tokenizer 0x40000000 /* Enable fts3_tokenizer(2) */
-
-
-/*
-** Bits of the sqlite3.dbOptFlags field that are used by the
-** sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS,...) interface to
-** selectively disable various optimizations.
-*/
-#define SQLITE_QueryFlattener 0x0001 /* Query flattening */
-#define SQLITE_ColumnCache 0x0002 /* Column cache */
-#define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */
-#define SQLITE_FactorOutConst 0x0008 /* Constant factoring */
-/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */
-#define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */
-#define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */
-#define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */
-#define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */
-#define SQLITE_Transitive 0x0200 /* Transitive constraints */
-#define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */
-#define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */
-#define SQLITE_CursorHints 0x2000 /* Add OP_CursorHint opcodes */
-#define SQLITE_AllOpts 0xffff /* All optimizations */
-
-/*
-** Macros for testing whether or not optimizations are enabled or disabled.
-*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-#define OptimizationDisabled(db, mask) (((db)->dbOptFlags&(mask))!=0)
-#define OptimizationEnabled(db, mask) (((db)->dbOptFlags&(mask))==0)
-#else
-#define OptimizationDisabled(db, mask) 0
-#define OptimizationEnabled(db, mask) 1
-#endif
-
-/*
-** Return true if it OK to factor constant expressions into the initialization
-** code. The argument is a Parse object for the code generator.
-*/
-#define ConstFactorOk(P) ((P)->okConstFactor)
-
-/*
-** Possible values for the sqlite.magic field.
-** The numbers are obtained at random and have no special meaning, other
-** than being distinct from one another.
-*/
-#define SQLITE_MAGIC_OPEN 0xa029a697 /* Database is open */
-#define SQLITE_MAGIC_CLOSED 0x9f3c2d33 /* Database is closed */
-#define SQLITE_MAGIC_SICK 0x4b771290 /* Error and awaiting close */
-#define SQLITE_MAGIC_BUSY 0xf03b7906 /* Database currently in use */
-#define SQLITE_MAGIC_ERROR 0xb5357930 /* An SQLITE_MISUSE error occurred */
-#define SQLITE_MAGIC_ZOMBIE 0x64cffc7f /* Close with last statement close */
-
-/*
-** Each SQL function is defined by an instance of the following
-** structure. For global built-in functions (ex: substr(), max(), count())
-** a pointer to this structure is held in the sqlite3BuiltinFunctions object.
-** For per-connection application-defined functions, a pointer to this
-** structure is held in the db->aHash hash table.
-**
-** The u.pHash field is used by the global built-ins. The u.pDestructor
-** field is used by per-connection app-def functions.
-*/
-struct FuncDef {
- i8 nArg; /* Number of arguments. -1 means unlimited */
- u16 funcFlags; /* Some combination of SQLITE_FUNC_* */
- void *pUserData; /* User data parameter */
- FuncDef *pNext; /* Next function with same name */
- void (*xSFunc)(sqlite3_context*,int,sqlite3_value**); /* func or agg-step */
- void (*xFinalize)(sqlite3_context*); /* Agg finalizer */
- const char *zName; /* SQL name of the function. */
- union {
- FuncDef *pHash; /* Next with a different name but the same hash */
- FuncDestructor *pDestructor; /* Reference counted destructor function */
- } u;
-};
-
-/*
-** This structure encapsulates a user-function destructor callback (as
-** configured using create_function_v2()) and a reference counter. When
-** create_function_v2() is called to create a function with a destructor,
-** a single object of this type is allocated. FuncDestructor.nRef is set to
-** the number of FuncDef objects created (either 1 or 3, depending on whether
-** or not the specified encoding is SQLITE_ANY). The FuncDef.pDestructor
-** member of each of the new FuncDef objects is set to point to the allocated
-** FuncDestructor.
-**
-** Thereafter, when one of the FuncDef objects is deleted, the reference
-** count on this object is decremented. When it reaches 0, the destructor
-** is invoked and the FuncDestructor structure freed.
-*/
-struct FuncDestructor {
- int nRef;
- void (*xDestroy)(void *);
- void *pUserData;
-};
-
-/*
-** Possible values for FuncDef.flags. Note that the _LENGTH and _TYPEOF
-** values must correspond to OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG. And
-** SQLITE_FUNC_CONSTANT must be the same as SQLITE_DETERMINISTIC. There
-** are assert() statements in the code to verify this.
-**
-** Value constraints (enforced via assert()):
-** SQLITE_FUNC_MINMAX == NC_MinMaxAgg == SF_MinMaxAgg
-** SQLITE_FUNC_LENGTH == OPFLAG_LENGTHARG
-** SQLITE_FUNC_TYPEOF == OPFLAG_TYPEOFARG
-** SQLITE_FUNC_CONSTANT == SQLITE_DETERMINISTIC from the API
-** SQLITE_FUNC_ENCMASK depends on SQLITE_UTF* macros in the API
-*/
-#define SQLITE_FUNC_ENCMASK 0x0003 /* SQLITE_UTF8, SQLITE_UTF16BE or UTF16LE */
-#define SQLITE_FUNC_LIKE 0x0004 /* Candidate for the LIKE optimization */
-#define SQLITE_FUNC_CASE 0x0008 /* Case-sensitive LIKE-type function */
-#define SQLITE_FUNC_EPHEM 0x0010 /* Ephemeral. Delete with VDBE */
-#define SQLITE_FUNC_NEEDCOLL 0x0020 /* sqlite3GetFuncCollSeq() might be called*/
-#define SQLITE_FUNC_LENGTH 0x0040 /* Built-in length() function */
-#define SQLITE_FUNC_TYPEOF 0x0080 /* Built-in typeof() function */
-#define SQLITE_FUNC_COUNT 0x0100 /* Built-in count(*) aggregate */
-#define SQLITE_FUNC_COALESCE 0x0200 /* Built-in coalesce() or ifnull() */
-#define SQLITE_FUNC_UNLIKELY 0x0400 /* Built-in unlikely() function */
-#define SQLITE_FUNC_CONSTANT 0x0800 /* Constant inputs give a constant output */
-#define SQLITE_FUNC_MINMAX 0x1000 /* True for min() and max() aggregates */
-#define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a
- ** single query - might change over time */
-
-/*
-** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are
-** used to create the initializers for the FuncDef structures.
-**
-** FUNCTION(zName, nArg, iArg, bNC, xFunc)
-** Used to create a scalar function definition of a function zName
-** implemented by C function xFunc that accepts nArg arguments. The
-** value passed as iArg is cast to a (void*) and made available
-** as the user-data (sqlite3_user_data()) for the function. If
-** argument bNC is true, then the SQLITE_FUNC_NEEDCOLL flag is set.
-**
-** VFUNCTION(zName, nArg, iArg, bNC, xFunc)
-** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag.
-**
-** DFUNCTION(zName, nArg, iArg, bNC, xFunc)
-** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and
-** adds the SQLITE_FUNC_SLOCHNG flag. Used for date & time functions
-** and functions like sqlite_version() that can change, but not during
-** a single query.
-**
-** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal)
-** Used to create an aggregate function definition implemented by
-** the C functions xStep and xFinal. The first four parameters
-** are interpreted in the same way as the first 4 parameters to
-** FUNCTION().
-**
-** LIKEFUNC(zName, nArg, pArg, flags)
-** Used to create a scalar function definition of a function zName
-** that accepts nArg arguments and is implemented by a call to C
-** function likeFunc. Argument pArg is cast to a (void *) and made
-** available as the function user-data (sqlite3_user_data()). The
-** FuncDef.flags variable is set to the value passed as the flags
-** parameter.
-*/
-#define FUNCTION(zName, nArg, iArg, bNC, xFunc) \
- {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
-#define VFUNCTION(zName, nArg, iArg, bNC, xFunc) \
- {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
-#define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \
- {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
-#define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \
- {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\
- SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} }
-#define STR_FUNCTION(zName, nArg, pArg, bNC, xFunc) \
- {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \
- pArg, 0, xFunc, 0, #zName, }
-#define LIKEFUNC(zName, nArg, arg, flags) \
- {nArg, SQLITE_FUNC_CONSTANT|SQLITE_UTF8|flags, \
- (void *)arg, 0, likeFunc, 0, #zName, {0} }
-#define AGGREGATE(zName, nArg, arg, nc, xStep, xFinal) \
- {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL), \
- SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
-#define AGGREGATE2(zName, nArg, arg, nc, xStep, xFinal, extraFlags) \
- {nArg, SQLITE_UTF8|(nc*SQLITE_FUNC_NEEDCOLL)|extraFlags, \
- SQLITE_INT_TO_PTR(arg), 0, xStep,xFinal,#zName, {0}}
-
-/*
-** All current savepoints are stored in a linked list starting at
-** sqlite3.pSavepoint. The first element in the list is the most recently
-** opened savepoint. Savepoints are added to the list by the vdbe
-** OP_Savepoint instruction.
-*/
-struct Savepoint {
- char *zName; /* Savepoint name (nul-terminated) */
- i64 nDeferredCons; /* Number of deferred fk violations */
- i64 nDeferredImmCons; /* Number of deferred imm fk. */
- Savepoint *pNext; /* Parent savepoint (if any) */
-};
-
-/*
-** The following are used as the second parameter to sqlite3Savepoint(),
-** and as the P1 argument to the OP_Savepoint instruction.
-*/
-#define SAVEPOINT_BEGIN 0
-#define SAVEPOINT_RELEASE 1
-#define SAVEPOINT_ROLLBACK 2
-
-
-/*
-** Each SQLite module (virtual table definition) is defined by an
-** instance of the following structure, stored in the sqlite3.aModule
-** hash table.
-*/
-struct Module {
- const sqlite3_module *pModule; /* Callback pointers */
- const char *zName; /* Name passed to create_module() */
- void *pAux; /* pAux passed to create_module() */
- void (*xDestroy)(void *); /* Module destructor function */
- Table *pEpoTab; /* Eponymous table for this module */
-};
-
-/*
-** information about each column of an SQL table is held in an instance
-** of this structure.
-*/
-struct Column {
- char *zName; /* Name of this column, \000, then the type */
- Expr *pDflt; /* Default value of this column */
- char *zColl; /* Collating sequence. If NULL, use the default */
- u8 notNull; /* An OE_ code for handling a NOT NULL constraint */
- char affinity; /* One of the SQLITE_AFF_... values */
- u8 szEst; /* Estimated size of value in this column. sizeof(INT)==1 */
- u8 colFlags; /* Boolean properties. See COLFLAG_ defines below */
-};
-
-/* Allowed values for Column.colFlags:
-*/
-#define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */
-#define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */
-#define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */
-
-/*
-** A "Collating Sequence" is defined by an instance of the following
-** structure. Conceptually, a collating sequence consists of a name and
-** a comparison routine that defines the order of that sequence.
-**
-** If CollSeq.xCmp is NULL, it means that the
-** collating sequence is undefined. Indices built on an undefined
-** collating sequence may not be read or written.
-*/
-struct CollSeq {
- char *zName; /* Name of the collating sequence, UTF-8 encoded */
- u8 enc; /* Text encoding handled by xCmp() */
- void *pUser; /* First argument to xCmp() */
- int (*xCmp)(void*,int, const void*, int, const void*);
- void (*xDel)(void*); /* Destructor for pUser */
-};
-
-/*
-** A sort order can be either ASC or DESC.
-*/
-#define SQLITE_SO_ASC 0 /* Sort in ascending order */
-#define SQLITE_SO_DESC 1 /* Sort in ascending order */
-#define SQLITE_SO_UNDEFINED -1 /* No sort order specified */
-
-/*
-** Column affinity types.
-**
-** These used to have mnemonic name like 'i' for SQLITE_AFF_INTEGER and
-** 't' for SQLITE_AFF_TEXT. But we can save a little space and improve
-** the speed a little by numbering the values consecutively.
-**
-** But rather than start with 0 or 1, we begin with 'A'. That way,
-** when multiple affinity types are concatenated into a string and
-** used as the P4 operand, they will be more readable.
-**
-** Note also that the numeric types are grouped together so that testing
-** for a numeric type is a single comparison. And the BLOB type is first.
-*/
-#define SQLITE_AFF_BLOB 'A'
-#define SQLITE_AFF_TEXT 'B'
-#define SQLITE_AFF_NUMERIC 'C'
-#define SQLITE_AFF_INTEGER 'D'
-#define SQLITE_AFF_REAL 'E'
-
-#define sqlite3IsNumericAffinity(X) ((X)>=SQLITE_AFF_NUMERIC)
-
-/*
-** The SQLITE_AFF_MASK values masks off the significant bits of an
-** affinity value.
-*/
-#define SQLITE_AFF_MASK 0x47
-
-/*
-** Additional bit values that can be ORed with an affinity without
-** changing the affinity.
-**
-** The SQLITE_NOTNULL flag is a combination of NULLEQ and JUMPIFNULL.
-** It causes an assert() to fire if either operand to a comparison
-** operator is NULL. It is added to certain comparison operators to
-** prove that the operands are always NOT NULL.
-*/
-#define SQLITE_JUMPIFNULL 0x10 /* jumps if either operand is NULL */
-#define SQLITE_STOREP2 0x20 /* Store result in reg[P2] rather than jump */
-#define SQLITE_NULLEQ 0x80 /* NULL=NULL */
-#define SQLITE_NOTNULL 0x90 /* Assert that operands are never NULL */
-
-/*
-** An object of this type is created for each virtual table present in
-** the database schema.
-**
-** If the database schema is shared, then there is one instance of this
-** structure for each database connection (sqlite3*) that uses the shared
-** schema. This is because each database connection requires its own unique
-** instance of the sqlite3_vtab* handle used to access the virtual table
-** implementation. sqlite3_vtab* handles can not be shared between
-** database connections, even when the rest of the in-memory database
-** schema is shared, as the implementation often stores the database
-** connection handle passed to it via the xConnect() or xCreate() method
-** during initialization internally. This database connection handle may
-** then be used by the virtual table implementation to access real tables
-** within the database. So that they appear as part of the callers
-** transaction, these accesses need to be made via the same database
-** connection as that used to execute SQL operations on the virtual table.
-**
-** All VTable objects that correspond to a single table in a shared
-** database schema are initially stored in a linked-list pointed to by
-** the Table.pVTable member variable of the corresponding Table object.
-** When an sqlite3_prepare() operation is required to access the virtual
-** table, it searches the list for the VTable that corresponds to the
-** database connection doing the preparing so as to use the correct
-** sqlite3_vtab* handle in the compiled query.
-**
-** When an in-memory Table object is deleted (for example when the
-** schema is being reloaded for some reason), the VTable objects are not
-** deleted and the sqlite3_vtab* handles are not xDisconnect()ed
-** immediately. Instead, they are moved from the Table.pVTable list to
-** another linked list headed by the sqlite3.pDisconnect member of the
-** corresponding sqlite3 structure. They are then deleted/xDisconnected
-** next time a statement is prepared using said sqlite3*. This is done
-** to avoid deadlock issues involving multiple sqlite3.mutex mutexes.
-** Refer to comments above function sqlite3VtabUnlockList() for an
-** explanation as to why it is safe to add an entry to an sqlite3.pDisconnect
-** list without holding the corresponding sqlite3.mutex mutex.
-**
-** The memory for objects of this type is always allocated by
-** sqlite3DbMalloc(), using the connection handle stored in VTable.db as
-** the first argument.
-*/
-struct VTable {
- sqlite3 *db; /* Database connection associated with this table */
- Module *pMod; /* Pointer to module implementation */
- sqlite3_vtab *pVtab; /* Pointer to vtab instance */
- int nRef; /* Number of pointers to this structure */
- u8 bConstraint; /* True if constraints are supported */
- int iSavepoint; /* Depth of the SAVEPOINT stack */
- VTable *pNext; /* Next in linked list (see above) */
-};
-
-/*
-** The schema for each SQL table and view is represented in memory
-** by an instance of the following structure.
-*/
-struct Table {
- char *zName; /* Name of the table or view */
- Column *aCol; /* Information about each column */
- Index *pIndex; /* List of SQL indexes on this table. */
- Select *pSelect; /* NULL for tables. Points to definition if a view. */
- FKey *pFKey; /* Linked list of all foreign keys in this table */
- char *zColAff; /* String defining the affinity of each column */
- ExprList *pCheck; /* All CHECK constraints */
- /* ... also used as column name list in a VIEW */
- int tnum; /* Root BTree page for this table */
- i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */
- i16 nCol; /* Number of columns in this table */
- u16 nRef; /* Number of pointers to this Table */
- LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */
- LogEst szTabRow; /* Estimated size of each table row in bytes */
-#ifdef SQLITE_ENABLE_COSTMULT
- LogEst costMult; /* Cost multiplier for using this table */
-#endif
- u8 tabFlags; /* Mask of TF_* values */
- u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */
-#ifndef SQLITE_OMIT_ALTERTABLE
- int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */
-#endif
-#ifndef SQLITE_OMIT_VIRTUALTABLE
- int nModuleArg; /* Number of arguments to the module */
- char **azModuleArg; /* 0: module 1: schema 2: vtab name 3...: args */
- VTable *pVTable; /* List of VTable objects. */
-#endif
- Trigger *pTrigger; /* List of triggers stored in pSchema */
- Schema *pSchema; /* Schema that contains this table */
- Table *pNextZombie; /* Next on the Parse.pZombieTab list */
-};
-
-/*
-** Allowed values for Table.tabFlags.
-**
-** TF_OOOHidden applies to tables or view that have hidden columns that are
-** followed by non-hidden columns. Example: "CREATE VIRTUAL TABLE x USING
-** vtab1(a HIDDEN, b);". Since "b" is a non-hidden column but "a" is hidden,
-** the TF_OOOHidden attribute would apply in this case. Such tables require
-** special handling during INSERT processing.
-*/
-#define TF_Readonly 0x01 /* Read-only system table */
-#define TF_Ephemeral 0x02 /* An ephemeral table */
-#define TF_HasPrimaryKey 0x04 /* Table has a primary key */
-#define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */
-#define TF_Virtual 0x10 /* Is a virtual table */
-#define TF_WithoutRowid 0x20 /* No rowid. PRIMARY KEY is the key */
-#define TF_NoVisibleRowid 0x40 /* No user-visible "rowid" column */
-#define TF_OOOHidden 0x80 /* Out-of-Order hidden columns */
-
-
-/*
-** Test to see whether or not a table is a virtual table. This is
-** done as a macro so that it will be optimized out when virtual
-** table support is omitted from the build.
-*/
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-# define IsVirtual(X) (((X)->tabFlags & TF_Virtual)!=0)
-#else
-# define IsVirtual(X) 0
-#endif
-
-/*
-** Macros to determine if a column is hidden. IsOrdinaryHiddenColumn()
-** only works for non-virtual tables (ordinary tables and views) and is
-** always false unless SQLITE_ENABLE_HIDDEN_COLUMNS is defined. The
-** IsHiddenColumn() macro is general purpose.
-*/
-#if defined(SQLITE_ENABLE_HIDDEN_COLUMNS)
-# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-# define IsOrdinaryHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-#elif !defined(SQLITE_OMIT_VIRTUALTABLE)
-# define IsHiddenColumn(X) (((X)->colFlags & COLFLAG_HIDDEN)!=0)
-# define IsOrdinaryHiddenColumn(X) 0
-#else
-# define IsHiddenColumn(X) 0
-# define IsOrdinaryHiddenColumn(X) 0
-#endif
-
-
-/* Does the table have a rowid */
-#define HasRowid(X) (((X)->tabFlags & TF_WithoutRowid)==0)
-#define VisibleRowid(X) (((X)->tabFlags & TF_NoVisibleRowid)==0)
-
-/*
-** Each foreign key constraint is an instance of the following structure.
-**
-** A foreign key is associated with two tables. The "from" table is
-** the table that contains the REFERENCES clause that creates the foreign
-** key. The "to" table is the table that is named in the REFERENCES clause.
-** Consider this example:
-**
-** CREATE TABLE ex1(
-** a INTEGER PRIMARY KEY,
-** b INTEGER CONSTRAINT fk1 REFERENCES ex2(x)
-** );
-**
-** For foreign key "fk1", the from-table is "ex1" and the to-table is "ex2".
-** Equivalent names:
-**
-** from-table == child-table
-** to-table == parent-table
-**
-** Each REFERENCES clause generates an instance of the following structure
-** which is attached to the from-table. The to-table need not exist when
-** the from-table is created. The existence of the to-table is not checked.
-**
-** The list of all parents for child Table X is held at X.pFKey.
-**
-** A list of all children for a table named Z (which might not even exist)
-** is held in Schema.fkeyHash with a hash key of Z.
-*/
-struct FKey {
- Table *pFrom; /* Table containing the REFERENCES clause (aka: Child) */
- FKey *pNextFrom; /* Next FKey with the same in pFrom. Next parent of pFrom */
- char *zTo; /* Name of table that the key points to (aka: Parent) */
- FKey *pNextTo; /* Next with the same zTo. Next child of zTo. */
- FKey *pPrevTo; /* Previous with the same zTo */
- int nCol; /* Number of columns in this key */
- /* EV: R-30323-21917 */
- u8 isDeferred; /* True if constraint checking is deferred till COMMIT */
- u8 aAction[2]; /* ON DELETE and ON UPDATE actions, respectively */
- Trigger *apTrigger[2];/* Triggers for aAction[] actions */
- struct sColMap { /* Mapping of columns in pFrom to columns in zTo */
- int iFrom; /* Index of column in pFrom */
- char *zCol; /* Name of column in zTo. If NULL use PRIMARY KEY */
- } aCol[1]; /* One entry for each of nCol columns */
-};
-
-/*
-** SQLite supports many different ways to resolve a constraint
-** error. ROLLBACK processing means that a constraint violation
-** causes the operation in process to fail and for the current transaction
-** to be rolled back. ABORT processing means the operation in process
-** fails and any prior changes from that one operation are backed out,
-** but the transaction is not rolled back. FAIL processing means that
-** the operation in progress stops and returns an error code. But prior
-** changes due to the same operation are not backed out and no rollback
-** occurs. IGNORE means that the particular row that caused the constraint
-** error is not inserted or updated. Processing continues and no error
-** is returned. REPLACE means that preexisting database rows that caused
-** a UNIQUE constraint violation are removed so that the new insert or
-** update can proceed. Processing continues and no error is reported.
-**
-** RESTRICT, SETNULL, and CASCADE actions apply only to foreign keys.
-** RESTRICT is the same as ABORT for IMMEDIATE foreign keys and the
-** same as ROLLBACK for DEFERRED keys. SETNULL means that the foreign
-** key is set to NULL. CASCADE means that a DELETE or UPDATE of the
-** referenced table row is propagated into the row that holds the
-** foreign key.
-**
-** The following symbolic values are used to record which type
-** of action to take.
-*/
-#define OE_None 0 /* There is no constraint to check */
-#define OE_Rollback 1 /* Fail the operation and rollback the transaction */
-#define OE_Abort 2 /* Back out changes but do no rollback transaction */
-#define OE_Fail 3 /* Stop the operation but leave all prior changes */
-#define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */
-#define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */
-
-#define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */
-#define OE_SetNull 7 /* Set the foreign key value to NULL */
-#define OE_SetDflt 8 /* Set the foreign key value to its default */
-#define OE_Cascade 9 /* Cascade the changes */
-
-#define OE_Default 10 /* Do whatever the default action is */
-
-
-/*
-** An instance of the following structure is passed as the first
-** argument to sqlite3VdbeKeyCompare and is used to control the
-** comparison of the two index keys.
-**
-** Note that aSortOrder[] and aColl[] have nField+1 slots. There
-** are nField slots for the columns of an index then one extra slot
-** for the rowid at the end.
-*/
-struct KeyInfo {
- u32 nRef; /* Number of references to this KeyInfo object */
- u8 enc; /* Text encoding - one of the SQLITE_UTF* values */
- u16 nField; /* Number of key columns in the index */
- u16 nXField; /* Number of columns beyond the key columns */
- sqlite3 *db; /* The database connection */
- u8 *aSortOrder; /* Sort order for each column. */
- CollSeq *aColl[1]; /* Collating sequence for each term of the key */
-};
-
-/*
-** This object holds a record which has been parsed out into individual
-** fields, for the purposes of doing a comparison.
-**
-** A record is an object that contains one or more fields of data.
-** Records are used to store the content of a table row and to store
-** the key of an index. A blob encoding of a record is created by
-** the OP_MakeRecord opcode of the VDBE and is disassembled by the
-** OP_Column opcode.
-**
-** An instance of this object serves as a "key" for doing a search on
-** an index b+tree. The goal of the search is to find the entry that
-** is closed to the key described by this object. This object might hold
-** just a prefix of the key. The number of fields is given by
-** pKeyInfo->nField.
-**
-** The r1 and r2 fields are the values to return if this key is less than
-** or greater than a key in the btree, respectively. These are normally
-** -1 and +1 respectively, but might be inverted to +1 and -1 if the b-tree
-** is in DESC order.
-**
-** The key comparison functions actually return default_rc when they find
-** an equals comparison. default_rc can be -1, 0, or +1. If there are
-** multiple entries in the b-tree with the same key (when only looking
-** at the first pKeyInfo->nFields,) then default_rc can be set to -1 to
-** cause the search to find the last match, or +1 to cause the search to
-** find the first match.
-**
-** The key comparison functions will set eqSeen to true if they ever
-** get and equal results when comparing this structure to a b-tree record.
-** When default_rc!=0, the search might end up on the record immediately
-** before the first match or immediately after the last match. The
-** eqSeen field will indicate whether or not an exact match exists in the
-** b-tree.
-*/
-struct UnpackedRecord {
- KeyInfo *pKeyInfo; /* Collation and sort-order information */
- Mem *aMem; /* Values */
- u16 nField; /* Number of entries in apMem[] */
- i8 default_rc; /* Comparison result if keys are equal */
- u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */
- i8 r1; /* Value to return if (lhs > rhs) */
- i8 r2; /* Value to return if (rhs < lhs) */
- u8 eqSeen; /* True if an equality comparison has been seen */
-};
-
-
-/*
-** Each SQL index is represented in memory by an
-** instance of the following structure.
-**
-** The columns of the table that are to be indexed are described
-** by the aiColumn[] field of this structure. For example, suppose
-** we have the following table and index:
-**
-** CREATE TABLE Ex1(c1 int, c2 int, c3 text);
-** CREATE INDEX Ex2 ON Ex1(c3,c1);
-**
-** In the Table structure describing Ex1, nCol==3 because there are
-** three columns in the table. In the Index structure describing
-** Ex2, nColumn==2 since 2 of the 3 columns of Ex1 are indexed.
-** The value of aiColumn is {2, 0}. aiColumn[0]==2 because the
-** first column to be indexed (c3) has an index of 2 in Ex1.aCol[].
-** The second column to be indexed (c1) has an index of 0 in
-** Ex1.aCol[], hence Ex2.aiColumn[1]==0.
-**
-** The Index.onError field determines whether or not the indexed columns
-** must be unique and what to do if they are not. When Index.onError=OE_None,
-** it means this is not a unique index. Otherwise it is a unique index
-** and the value of Index.onError indicate the which conflict resolution
-** algorithm to employ whenever an attempt is made to insert a non-unique
-** element.
-**
-** While parsing a CREATE TABLE or CREATE INDEX statement in order to
-** generate VDBE code (as opposed to parsing one read from an sqlite_master
-** table as part of parsing an existing database schema), transient instances
-** of this structure may be created. In this case the Index.tnum variable is
-** used to store the address of a VDBE instruction, not a database page
-** number (it cannot - the database page is not allocated until the VDBE
-** program is executed). See convertToWithoutRowidTable() for details.
-*/
-struct Index {
- char *zName; /* Name of this index */
- i16 *aiColumn; /* Which columns are used by this index. 1st is 0 */
- LogEst *aiRowLogEst; /* From ANALYZE: Est. rows selected by each column */
- Table *pTable; /* The SQL table being indexed */
- char *zColAff; /* String defining the affinity of each column */
- Index *pNext; /* The next index associated with the same table */
- Schema *pSchema; /* Schema containing this index */
- u8 *aSortOrder; /* for each column: True==DESC, False==ASC */
- const char **azColl; /* Array of collation sequence names for index */
- Expr *pPartIdxWhere; /* WHERE clause for partial indices */
- ExprList *aColExpr; /* Column expressions */
- int tnum; /* DB Page containing root of this index */
- LogEst szIdxRow; /* Estimated average row size in bytes */
- u16 nKeyCol; /* Number of columns forming the key */
- u16 nColumn; /* Number of columns stored in the index */
- u8 onError; /* OE_Abort, OE_Ignore, OE_Replace, or OE_None */
- unsigned idxType:2; /* 1==UNIQUE, 2==PRIMARY KEY, 0==CREATE INDEX */
- unsigned bUnordered:1; /* Use this index for == or IN queries only */
- unsigned uniqNotNull:1; /* True if UNIQUE and NOT NULL for all columns */
- unsigned isResized:1; /* True if resizeIndexObject() has been called */
- unsigned isCovering:1; /* True if this is a covering index */
- unsigned noSkipScan:1; /* Do not try to use skip-scan if true */
-#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
- int nSample; /* Number of elements in aSample[] */
- int nSampleCol; /* Size of IndexSample.anEq[] and so on */
- tRowcnt *aAvgEq; /* Average nEq values for keys not in aSample */
- IndexSample *aSample; /* Samples of the left-most key */
- tRowcnt *aiRowEst; /* Non-logarithmic stat1 data for this index */
- tRowcnt nRowEst0; /* Non-logarithmic number of rows in the index */
-#endif
-};
-
-/*
-** Allowed values for Index.idxType
-*/
-#define SQLITE_IDXTYPE_APPDEF 0 /* Created using CREATE INDEX */
-#define SQLITE_IDXTYPE_UNIQUE 1 /* Implements a UNIQUE constraint */
-#define SQLITE_IDXTYPE_PRIMARYKEY 2 /* Is the PRIMARY KEY for the table */
-
-/* Return true if index X is a PRIMARY KEY index */
-#define IsPrimaryKeyIndex(X) ((X)->idxType==SQLITE_IDXTYPE_PRIMARYKEY)
-
-/* Return true if index X is a UNIQUE index */
-#define IsUniqueIndex(X) ((X)->onError!=OE_None)
-
-/* The Index.aiColumn[] values are normally positive integer. But
-** there are some negative values that have special meaning:
-*/
-#define XN_ROWID (-1) /* Indexed column is the rowid */
-#define XN_EXPR (-2) /* Indexed column is an expression */
-
-/*
-** Each sample stored in the sqlite_stat3 table is represented in memory
-** using a structure of this type. See documentation at the top of the
-** analyze.c source file for additional information.
-*/
-struct IndexSample {
- void *p; /* Pointer to sampled record */
- int n; /* Size of record in bytes */
- tRowcnt *anEq; /* Est. number of rows where the key equals this sample */
- tRowcnt *anLt; /* Est. number of rows where key is less than this sample */
- tRowcnt *anDLt; /* Est. number of distinct keys less than this sample */
-};
-
-/*
-** Each token coming out of the lexer is an instance of
-** this structure. Tokens are also used as part of an expression.
-**
-** Note if Token.z==0 then Token.dyn and Token.n are undefined and
-** may contain random values. Do not make any assumptions about Token.dyn
-** and Token.n when Token.z==0.
-*/
-struct Token {
- const char *z; /* Text of the token. Not NULL-terminated! */
- unsigned int n; /* Number of characters in this token */
-};
-
-/*
-** An instance of this structure contains information needed to generate
-** code for a SELECT that contains aggregate functions.
-**
-** If Expr.op==TK_AGG_COLUMN or TK_AGG_FUNCTION then Expr.pAggInfo is a
-** pointer to this structure. The Expr.iColumn field is the index in
-** AggInfo.aCol[] or AggInfo.aFunc[] of information needed to generate
-** code for that node.
-**
-** AggInfo.pGroupBy and AggInfo.aFunc.pExpr point to fields within the
-** original Select structure that describes the SELECT statement. These
-** fields do not need to be freed when deallocating the AggInfo structure.
-*/
-struct AggInfo {
- u8 directMode; /* Direct rendering mode means take data directly
- ** from source tables rather than from accumulators */
- u8 useSortingIdx; /* In direct mode, reference the sorting index rather
- ** than the source table */
- int sortingIdx; /* Cursor number of the sorting index */
- int sortingIdxPTab; /* Cursor number of pseudo-table */
- int nSortingColumn; /* Number of columns in the sorting index */
- int mnReg, mxReg; /* Range of registers allocated for aCol and aFunc */
- ExprList *pGroupBy; /* The group by clause */
- struct AggInfo_col { /* For each column used in source tables */
- Table *pTab; /* Source table */
- int iTable; /* Cursor number of the source table */
- int iColumn; /* Column number within the source table */
- int iSorterColumn; /* Column number in the sorting index */
- int iMem; /* Memory location that acts as accumulator */
- Expr *pExpr; /* The original expression */
- } *aCol;
- int nColumn; /* Number of used entries in aCol[] */
- int nAccumulator; /* Number of columns that show through to the output.
- ** Additional columns are used only as parameters to
- ** aggregate functions */
- struct AggInfo_func { /* For each aggregate function */
- Expr *pExpr; /* Expression encoding the function */
- FuncDef *pFunc; /* The aggregate function implementation */
- int iMem; /* Memory location that acts as accumulator */
- int iDistinct; /* Ephemeral table used to enforce DISTINCT */
- } *aFunc;
- int nFunc; /* Number of entries in aFunc[] */
-};
-
-/*
-** The datatype ynVar is a signed integer, either 16-bit or 32-bit.
-** Usually it is 16-bits. But if SQLITE_MAX_VARIABLE_NUMBER is greater
-** than 32767 we have to make it 32-bit. 16-bit is preferred because
-** it uses less memory in the Expr object, which is a big memory user
-** in systems with lots of prepared statements. And few applications
-** need more than about 10 or 20 variables. But some extreme users want
-** to have prepared statements with over 32767 variables, and for them
-** the option is available (at compile-time).
-*/
-#if SQLITE_MAX_VARIABLE_NUMBER<=32767
-typedef i16 ynVar;
-#else
-typedef int ynVar;
-#endif
-
-/*
-** Each node of an expression in the parse tree is an instance
-** of this structure.
-**
-** Expr.op is the opcode. The integer parser token codes are reused
-** as opcodes here. For example, the parser defines TK_GE to be an integer
-** code representing the ">=" operator. This same integer code is reused
-** to represent the greater-than-or-equal-to operator in the expression
-** tree.
-**
-** If the expression is an SQL literal (TK_INTEGER, TK_FLOAT, TK_BLOB,
-** or TK_STRING), then Expr.token contains the text of the SQL literal. If
-** the expression is a variable (TK_VARIABLE), then Expr.token contains the
-** variable name. Finally, if the expression is an SQL function (TK_FUNCTION),
-** then Expr.token contains the name of the function.
-**
-** Expr.pRight and Expr.pLeft are the left and right subexpressions of a
-** binary operator. Either or both may be NULL.
-**
-** Expr.x.pList is a list of arguments if the expression is an SQL function,
-** a CASE expression or an IN expression of the form " IN (, ...)".
-** Expr.x.pSelect is used if the expression is a sub-select or an expression of
-** the form " IN (SELECT ...)". If the EP_xIsSelect bit is set in the
-** Expr.flags mask, then Expr.x.pSelect is valid. Otherwise, Expr.x.pList is
-** valid.
-**
-** An expression of the form ID or ID.ID refers to a column in a table.
-** For such expressions, Expr.op is set to TK_COLUMN and Expr.iTable is
-** the integer cursor number of a VDBE cursor pointing to that table and
-** Expr.iColumn is the column number for the specific column. If the
-** expression is used as a result in an aggregate SELECT, then the
-** value is also stored in the Expr.iAgg column in the aggregate so that
-** it can be accessed after all aggregates are computed.
-**
-** If the expression is an unbound variable marker (a question mark
-** character '?' in the original SQL) then the Expr.iTable holds the index
-** number for that variable.
-**
-** If the expression is a subquery then Expr.iColumn holds an integer
-** register number containing the result of the subquery. If the
-** subquery gives a constant result, then iTable is -1. If the subquery
-** gives a different answer at different times during statement processing
-** then iTable is the address of a subroutine that computes the subquery.
-**
-** If the Expr is of type OP_Column, and the table it is selecting from
-** is a disk table or the "old.*" pseudo-table, then pTab points to the
-** corresponding table definition.
-**
-** ALLOCATION NOTES:
-**
-** Expr objects can use a lot of memory space in database schema. To
-** help reduce memory requirements, sometimes an Expr object will be
-** truncated. And to reduce the number of memory allocations, sometimes
-** two or more Expr objects will be stored in a single memory allocation,
-** together with Expr.zToken strings.
-**
-** If the EP_Reduced and EP_TokenOnly flags are set when
-** an Expr object is truncated. When EP_Reduced is set, then all
-** the child Expr objects in the Expr.pLeft and Expr.pRight subtrees
-** are contained within the same memory allocation. Note, however, that
-** the subtrees in Expr.x.pList or Expr.x.pSelect are always separately
-** allocated, regardless of whether or not EP_Reduced is set.
-*/
-struct Expr {
- u8 op; /* Operation performed by this node */
- char affinity; /* The affinity of the column or 0 if not a column */
- u32 flags; /* Various flags. EP_* See below */
- union {
- char *zToken; /* Token value. Zero terminated and dequoted */
- int iValue; /* Non-negative integer value if EP_IntValue */
- } u;
-
- /* If the EP_TokenOnly flag is set in the Expr.flags mask, then no
- ** space is allocated for the fields below this point. An attempt to
- ** access them will result in a segfault or malfunction.
- *********************************************************************/
-
- Expr *pLeft; /* Left subnode */
- Expr *pRight; /* Right subnode */
- union {
- ExprList *pList; /* op = IN, EXISTS, SELECT, CASE, FUNCTION, BETWEEN */
- Select *pSelect; /* EP_xIsSelect and op = IN, EXISTS, SELECT */
- } x;
-
- /* If the EP_Reduced flag is set in the Expr.flags mask, then no
- ** space is allocated for the fields below this point. An attempt to
- ** access them will result in a segfault or malfunction.
- *********************************************************************/
-
-#if SQLITE_MAX_EXPR_DEPTH>0
- int nHeight; /* Height of the tree headed by this node */
-#endif
- int iTable; /* TK_COLUMN: cursor number of table holding column
- ** TK_REGISTER: register number
- ** TK_TRIGGER: 1 -> new, 0 -> old
- ** EP_Unlikely: 134217728 times likelihood */
- ynVar iColumn; /* TK_COLUMN: column index. -1 for rowid.
- ** TK_VARIABLE: variable number (always >= 1). */
- i16 iAgg; /* Which entry in pAggInfo->aCol[] or ->aFunc[] */
- i16 iRightJoinTable; /* If EP_FromJoin, the right table of the join */
- u8 op2; /* TK_REGISTER: original value of Expr.op
- ** TK_COLUMN: the value of p5 for OP_Column
- ** TK_AGG_FUNCTION: nesting depth */
- AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */
- Table *pTab; /* Table for TK_COLUMN expressions. */
-};
-
-/*
-** The following are the meanings of bits in the Expr.flags field.
-*/
-#define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */
-#define EP_Agg 0x000002 /* Contains one or more aggregate functions */
-#define EP_Resolved 0x000004 /* IDs have been resolved to COLUMNs */
-#define EP_Error 0x000008 /* Expression contains one or more errors */
-#define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */
-#define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */
-#define EP_DblQuoted 0x000040 /* token.z was originally in "..." */
-#define EP_InfixFunc 0x000080 /* True for an infix function: LIKE, GLOB, etc */
-#define EP_Collate 0x000100 /* Tree contains a TK_COLLATE operator */
-#define EP_Generic 0x000200 /* Ignore COLLATE or affinity on this tree */
-#define EP_IntValue 0x000400 /* Integer value contained in u.iValue */
-#define EP_xIsSelect 0x000800 /* x.pSelect is valid (otherwise x.pList is) */
-#define EP_Skip 0x001000 /* COLLATE, AS, or UNLIKELY */
-#define EP_Reduced 0x002000 /* Expr struct EXPR_REDUCEDSIZE bytes only */
-#define EP_TokenOnly 0x004000 /* Expr struct EXPR_TOKENONLYSIZE bytes only */
-#define EP_Static 0x008000 /* Held in memory not obtained from malloc() */
-#define EP_MemToken 0x010000 /* Need to sqlite3DbFree() Expr.zToken */
-#define EP_NoReduce 0x020000 /* Cannot EXPRDUP_REDUCE this Expr */
-#define EP_Unlikely 0x040000 /* unlikely() or likelihood() function */
-#define EP_ConstFunc 0x080000 /* A SQLITE_FUNC_CONSTANT or _SLOCHNG function */
-#define EP_CanBeNull 0x100000 /* Can be null despite NOT NULL constraint */
-#define EP_Subquery 0x200000 /* Tree contains a TK_SELECT operator */
-#define EP_Alias 0x400000 /* Is an alias for a result set column */
-
-/*
-** Combinations of two or more EP_* flags
-*/
-#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */
-
-/*
-** These macros can be used to test, set, or clear bits in the
-** Expr.flags field.
-*/
-#define ExprHasProperty(E,P) (((E)->flags&(P))!=0)
-#define ExprHasAllProperty(E,P) (((E)->flags&(P))==(P))
-#define ExprSetProperty(E,P) (E)->flags|=(P)
-#define ExprClearProperty(E,P) (E)->flags&=~(P)
-
-/* The ExprSetVVAProperty() macro is used for Verification, Validation,
-** and Accreditation only. It works like ExprSetProperty() during VVA
-** processes but is a no-op for delivery.
-*/
-#ifdef SQLITE_DEBUG
-# define ExprSetVVAProperty(E,P) (E)->flags|=(P)
-#else
-# define ExprSetVVAProperty(E,P)
-#endif
-
-/*
-** Macros to determine the number of bytes required by a normal Expr
-** struct, an Expr struct with the EP_Reduced flag set in Expr.flags
-** and an Expr struct with the EP_TokenOnly flag set.
-*/
-#define EXPR_FULLSIZE sizeof(Expr) /* Full size */
-#define EXPR_REDUCEDSIZE offsetof(Expr,iTable) /* Common features */
-#define EXPR_TOKENONLYSIZE offsetof(Expr,pLeft) /* Fewer features */
-
-/*
-** Flags passed to the sqlite3ExprDup() function. See the header comment
-** above sqlite3ExprDup() for details.
-*/
-#define EXPRDUP_REDUCE 0x0001 /* Used reduced-size Expr nodes */
-
-/*
-** A list of expressions. Each expression may optionally have a
-** name. An expr/name combination can be used in several ways, such
-** as the list of "expr AS ID" fields following a "SELECT" or in the
-** list of "ID = expr" items in an UPDATE. A list of expressions can
-** also be used as the argument to a function, in which case the a.zName
-** field is not used.
-**
-** By default the Expr.zSpan field holds a human-readable description of
-** the expression that is used in the generation of error messages and
-** column labels. In this case, Expr.zSpan is typically the text of a
-** column expression as it exists in a SELECT statement. However, if
-** the bSpanIsTab flag is set, then zSpan is overloaded to mean the name
-** of the result column in the form: DATABASE.TABLE.COLUMN. This later
-** form is used for name resolution with nested FROM clauses.
-*/
-struct ExprList {
- int nExpr; /* Number of expressions on the list */
- struct ExprList_item { /* For each expression in the list */
- Expr *pExpr; /* The list of expressions */
- char *zName; /* Token associated with this expression */
- char *zSpan; /* Original text of the expression */
- u8 sortOrder; /* 1 for DESC or 0 for ASC */
- unsigned done :1; /* A flag to indicate when processing is finished */
- unsigned bSpanIsTab :1; /* zSpan holds DB.TABLE.COLUMN */
- unsigned reusable :1; /* Constant expression is reusable */
- union {
- struct {
- u16 iOrderByCol; /* For ORDER BY, column number in result set */
- u16 iAlias; /* Index into Parse.aAlias[] for zName */
- } x;
- int iConstExprReg; /* Register in which Expr value is cached */
- } u;
- } *a; /* Alloc a power of two greater or equal to nExpr */
-};
-
-/*
-** An instance of this structure is used by the parser to record both
-** the parse tree for an expression and the span of input text for an
-** expression.
-*/
-struct ExprSpan {
- Expr *pExpr; /* The expression parse tree */
- const char *zStart; /* First character of input text */
- const char *zEnd; /* One character past the end of input text */
-};
-
-/*
-** An instance of this structure can hold a simple list of identifiers,
-** such as the list "a,b,c" in the following statements:
-**
-** INSERT INTO t(a,b,c) VALUES ...;
-** CREATE INDEX idx ON t(a,b,c);
-** CREATE TRIGGER trig BEFORE UPDATE ON t(a,b,c) ...;
-**
-** The IdList.a.idx field is used when the IdList represents the list of
-** column names after a table name in an INSERT statement. In the statement
-**
-** INSERT INTO t(a,b,c) ...
-**
-** If "a" is the k-th column of table "t", then IdList.a[0].idx==k.
-*/
-struct IdList {
- struct IdList_item {
- char *zName; /* Name of the identifier */
- int idx; /* Index in some Table.aCol[] of a column named zName */
- } *a;
- int nId; /* Number of identifiers on the list */
-};
-
-/*
-** The bitmask datatype defined below is used for various optimizations.
-**
-** Changing this from a 64-bit to a 32-bit type limits the number of
-** tables in a join to 32 instead of 64. But it also reduces the size
-** of the library by 738 bytes on ix86.
-*/
-#ifdef SQLITE_BITMASK_TYPE
- typedef SQLITE_BITMASK_TYPE Bitmask;
-#else
- typedef u64 Bitmask;
-#endif
-
-/*
-** The number of bits in a Bitmask. "BMS" means "BitMask Size".
-*/
-#define BMS ((int)(sizeof(Bitmask)*8))
-
-/*
-** A bit in a Bitmask
-*/
-#define MASKBIT(n) (((Bitmask)1)<<(n))
-#define MASKBIT32(n) (((unsigned int)1)<<(n))
-#define ALLBITS ((Bitmask)-1)
-
-/*
-** The following structure describes the FROM clause of a SELECT statement.
-** Each table or subquery in the FROM clause is a separate element of
-** the SrcList.a[] array.
-**
-** With the addition of multiple database support, the following structure
-** can also be used to describe a particular table such as the table that
-** is modified by an INSERT, DELETE, or UPDATE statement. In standard SQL,
-** such a table must be a simple name: ID. But in SQLite, the table can
-** now be identified by a database name, a dot, then the table name: ID.ID.
-**
-** The jointype starts out showing the join type between the current table
-** and the next table on the list. The parser builds the list this way.
-** But sqlite3SrcListShiftJoinType() later shifts the jointypes so that each
-** jointype expresses the join between the table and the previous table.
-**
-** In the colUsed field, the high-order bit (bit 63) is set if the table
-** contains more than 63 columns and the 64-th or later column is used.
-*/
-struct SrcList {
- int nSrc; /* Number of tables or subqueries in the FROM clause */
- u32 nAlloc; /* Number of entries allocated in a[] below */
- struct SrcList_item {
- Schema *pSchema; /* Schema to which this item is fixed */
- char *zDatabase; /* Name of database holding this table */
- char *zName; /* Name of the table */
- char *zAlias; /* The "B" part of a "A AS B" phrase. zName is the "A" */
- Table *pTab; /* An SQL table corresponding to zName */
- Select *pSelect; /* A SELECT statement used in place of a table name */
- int addrFillSub; /* Address of subroutine to manifest a subquery */
- int regReturn; /* Register holding return address of addrFillSub */
- int regResult; /* Registers holding results of a co-routine */
- struct {
- u8 jointype; /* Type of join between this able and the previous */
- unsigned notIndexed :1; /* True if there is a NOT INDEXED clause */
- unsigned isIndexedBy :1; /* True if there is an INDEXED BY clause */
- unsigned isTabFunc :1; /* True if table-valued-function syntax */
- unsigned isCorrelated :1; /* True if sub-query is correlated */
- unsigned viaCoroutine :1; /* Implemented as a co-routine */
- unsigned isRecursive :1; /* True for recursive reference in WITH */
- } fg;
-#ifndef SQLITE_OMIT_EXPLAIN
- u8 iSelectId; /* If pSelect!=0, the id of the sub-select in EQP */
-#endif
- int iCursor; /* The VDBE cursor number used to access this table */
- Expr *pOn; /* The ON clause of a join */
- IdList *pUsing; /* The USING clause of a join */
- Bitmask colUsed; /* Bit N (1<" clause */
- ExprList *pFuncArg; /* Arguments to table-valued-function */
- } u1;
- Index *pIBIndex; /* Index structure corresponding to u1.zIndexedBy */
- } a[1]; /* One entry for each identifier on the list */
-};
-
-/*
-** Permitted values of the SrcList.a.jointype field
-*/
-#define JT_INNER 0x0001 /* Any kind of inner or cross join */
-#define JT_CROSS 0x0002 /* Explicit use of the CROSS keyword */
-#define JT_NATURAL 0x0004 /* True for a "natural" join */
-#define JT_LEFT 0x0008 /* Left outer join */
-#define JT_RIGHT 0x0010 /* Right outer join */
-#define JT_OUTER 0x0020 /* The "OUTER" keyword is present */
-#define JT_ERROR 0x0040 /* unknown or unsupported join type */
-
-
-/*
-** Flags appropriate for the wctrlFlags parameter of sqlite3WhereBegin()
-** and the WhereInfo.wctrlFlags member.
-**
-** Value constraints (enforced via assert()):
-** WHERE_USE_LIMIT == SF_FixedLimit
-*/
-#define WHERE_ORDERBY_NORMAL 0x0000 /* No-op */
-#define WHERE_ORDERBY_MIN 0x0001 /* ORDER BY processing for min() func */
-#define WHERE_ORDERBY_MAX 0x0002 /* ORDER BY processing for max() func */
-#define WHERE_ONEPASS_DESIRED 0x0004 /* Want to do one-pass UPDATE/DELETE */
-#define WHERE_DUPLICATES_OK 0x0008 /* Ok to return a row more than once */
-#define WHERE_OMIT_OPEN_CLOSE 0x0010 /* Table cursors are already open */
-#define WHERE_FORCE_TABLE 0x0020 /* Do not use an index-only search */
-#define WHERE_ONETABLE_ONLY 0x0040 /* Only code the 1st table in pTabList */
-#define WHERE_NO_AUTOINDEX 0x0080 /* Disallow automatic indexes */
-#define WHERE_GROUPBY 0x0100 /* pOrderBy is really a GROUP BY */
-#define WHERE_DISTINCTBY 0x0200 /* pOrderby is really a DISTINCT clause */
-#define WHERE_WANT_DISTINCT 0x0400 /* All output needs to be distinct */
-#define WHERE_SORTBYGROUP 0x0800 /* Support sqlite3WhereIsSorted() */
-#define WHERE_REOPEN_IDX 0x1000 /* Try to use OP_ReopenIdx */
-#define WHERE_ONEPASS_MULTIROW 0x2000 /* ONEPASS is ok with multiple rows */
-#define WHERE_USE_LIMIT 0x4000 /* There is a constant LIMIT clause */
-#define WHERE_SEEK_TABLE 0x8000 /* Do not defer seeks on main table */
-
-/* Allowed return values from sqlite3WhereIsDistinct()
-*/
-#define WHERE_DISTINCT_NOOP 0 /* DISTINCT keyword not used */
-#define WHERE_DISTINCT_UNIQUE 1 /* No duplicates */
-#define WHERE_DISTINCT_ORDERED 2 /* All duplicates are adjacent */
-#define WHERE_DISTINCT_UNORDERED 3 /* Duplicates are scattered */
-
-/*
-** A NameContext defines a context in which to resolve table and column
-** names. The context consists of a list of tables (the pSrcList) field and
-** a list of named expression (pEList). The named expression list may
-** be NULL. The pSrc corresponds to the FROM clause of a SELECT or
-** to the table being operated on by INSERT, UPDATE, or DELETE. The
-** pEList corresponds to the result set of a SELECT and is NULL for
-** other statements.
-**
-** NameContexts can be nested. When resolving names, the inner-most
-** context is searched first. If no match is found, the next outer
-** context is checked. If there is still no match, the next context
-** is checked. This process continues until either a match is found
-** or all contexts are check. When a match is found, the nRef member of
-** the context containing the match is incremented.
-**
-** Each subquery gets a new NameContext. The pNext field points to the
-** NameContext in the parent query. Thus the process of scanning the
-** NameContext list corresponds to searching through successively outer
-** subqueries looking for a match.
-*/
-struct NameContext {
- Parse *pParse; /* The parser */
- SrcList *pSrcList; /* One or more tables used to resolve names */
- ExprList *pEList; /* Optional list of result-set columns */
- AggInfo *pAggInfo; /* Information about aggregates at this level */
- NameContext *pNext; /* Next outer name context. NULL for outermost */
- int nRef; /* Number of names resolved by this context */
- int nErr; /* Number of errors encountered while resolving names */
- u16 ncFlags; /* Zero or more NC_* flags defined below */
-};
-
-/*
-** Allowed values for the NameContext, ncFlags field.
-**
-** Value constraints (all checked via assert()):
-** NC_HasAgg == SF_HasAgg
-** NC_MinMaxAgg == SF_MinMaxAgg == SQLITE_FUNC_MINMAX
-**
-*/
-#define NC_AllowAgg 0x0001 /* Aggregate functions are allowed here */
-#define NC_PartIdx 0x0002 /* True if resolving a partial index WHERE */
-#define NC_IsCheck 0x0004 /* True if resolving names in a CHECK constraint */
-#define NC_InAggFunc 0x0008 /* True if analyzing arguments to an agg func */
-#define NC_HasAgg 0x0010 /* One or more aggregate functions seen */
-#define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */
-#define NC_VarSelect 0x0040 /* A correlated subquery has been seen */
-#define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */
-
-/*
-** An instance of the following structure contains all information
-** needed to generate code for a single SELECT statement.
-**
-** nLimit is set to -1 if there is no LIMIT clause. nOffset is set to 0.
-** If there is a LIMIT clause, the parser sets nLimit to the value of the
-** limit and nOffset to the value of the offset (or 0 if there is not
-** offset). But later on, nLimit and nOffset become the memory locations
-** in the VDBE that record the limit and offset counters.
-**
-** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes.
-** These addresses must be stored so that we can go back and fill in
-** the P4_KEYINFO and P2 parameters later. Neither the KeyInfo nor
-** the number of columns in P2 can be computed at the same time
-** as the OP_OpenEphm instruction is coded because not
-** enough information about the compound query is known at that point.
-** The KeyInfo for addrOpenTran[0] and [1] contains collating sequences
-** for the result set. The KeyInfo for addrOpenEphm[2] contains collating
-** sequences for the ORDER BY clause.
-*/
-struct Select {
- ExprList *pEList; /* The fields of the result */
- u8 op; /* One of: TK_UNION TK_ALL TK_INTERSECT TK_EXCEPT */
- LogEst nSelectRow; /* Estimated number of result rows */
- u32 selFlags; /* Various SF_* values */
- int iLimit, iOffset; /* Memory registers holding LIMIT & OFFSET counters */
-#if SELECTTRACE_ENABLED
- char zSelName[12]; /* Symbolic name of this SELECT use for debugging */
-#endif
- int addrOpenEphm[2]; /* OP_OpenEphem opcodes related to this select */
- SrcList *pSrc; /* The FROM clause */
- Expr *pWhere; /* The WHERE clause */
- ExprList *pGroupBy; /* The GROUP BY clause */
- Expr *pHaving; /* The HAVING clause */
- ExprList *pOrderBy; /* The ORDER BY clause */
- Select *pPrior; /* Prior select in a compound select statement */
- Select *pNext; /* Next select to the left in a compound */
- Expr *pLimit; /* LIMIT expression. NULL means not used. */
- Expr *pOffset; /* OFFSET expression. NULL means not used. */
- With *pWith; /* WITH clause attached to this select. Or NULL. */
-};
-
-/*
-** Allowed values for Select.selFlags. The "SF" prefix stands for
-** "Select Flag".
-**
-** Value constraints (all checked via assert())
-** SF_HasAgg == NC_HasAgg
-** SF_MinMaxAgg == NC_MinMaxAgg == SQLITE_FUNC_MINMAX
-** SF_FixedLimit == WHERE_USE_LIMIT
-*/
-#define SF_Distinct 0x00001 /* Output should be DISTINCT */
-#define SF_All 0x00002 /* Includes the ALL keyword */
-#define SF_Resolved 0x00004 /* Identifiers have been resolved */
-#define SF_Aggregate 0x00008 /* Contains agg functions or a GROUP BY */
-#define SF_HasAgg 0x00010 /* Contains aggregate functions */
-#define SF_UsesEphemeral 0x00020 /* Uses the OpenEphemeral opcode */
-#define SF_Expanded 0x00040 /* sqlite3SelectExpand() called on this */
-#define SF_HasTypeInfo 0x00080 /* FROM subqueries have Table metadata */
-#define SF_Compound 0x00100 /* Part of a compound query */
-#define SF_Values 0x00200 /* Synthesized from VALUES clause */
-#define SF_MultiValue 0x00400 /* Single VALUES term with multiple rows */
-#define SF_NestedFrom 0x00800 /* Part of a parenthesized FROM clause */
-#define SF_MinMaxAgg 0x01000 /* Aggregate containing min() or max() */
-#define SF_Recursive 0x02000 /* The recursive part of a recursive CTE */
-#define SF_FixedLimit 0x04000 /* nSelectRow set by a constant LIMIT */
-#define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */
-#define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */
-#define SF_IncludeHidden 0x20000 /* Include hidden columns in output */
-
-
-/*
-** The results of a SELECT can be distributed in several ways, as defined
-** by one of the following macros. The "SRT" prefix means "SELECT Result
-** Type".
-**
-** SRT_Union Store results as a key in a temporary index
-** identified by pDest->iSDParm.
-**
-** SRT_Except Remove results from the temporary index pDest->iSDParm.
-**
-** SRT_Exists Store a 1 in memory cell pDest->iSDParm if the result
-** set is not empty.
-**
-** SRT_Discard Throw the results away. This is used by SELECT
-** statements within triggers whose only purpose is
-** the side-effects of functions.
-**
-** All of the above are free to ignore their ORDER BY clause. Those that
-** follow must honor the ORDER BY clause.
-**
-** SRT_Output Generate a row of output (using the OP_ResultRow
-** opcode) for each row in the result set.
-**
-** SRT_Mem Only valid if the result is a single column.
-** Store the first column of the first result row
-** in register pDest->iSDParm then abandon the rest
-** of the query. This destination implies "LIMIT 1".
-**
-** SRT_Set The result must be a single column. Store each
-** row of result as the key in table pDest->iSDParm.
-** Apply the affinity pDest->affSdst before storing
-** results. Used to implement "IN (SELECT ...)".
-**
-** SRT_EphemTab Create an temporary table pDest->iSDParm and store
-** the result there. The cursor is left open after
-** returning. This is like SRT_Table except that
-** this destination uses OP_OpenEphemeral to create
-** the table first.
-**
-** SRT_Coroutine Generate a co-routine that returns a new row of
-** results each time it is invoked. The entry point
-** of the co-routine is stored in register pDest->iSDParm
-** and the result row is stored in pDest->nDest registers
-** starting with pDest->iSdst.
-**
-** SRT_Table Store results in temporary table pDest->iSDParm.
-** SRT_Fifo This is like SRT_EphemTab except that the table
-** is assumed to already be open. SRT_Fifo has
-** the additional property of being able to ignore
-** the ORDER BY clause.
-**
-** SRT_DistFifo Store results in a temporary table pDest->iSDParm.
-** But also use temporary table pDest->iSDParm+1 as
-** a record of all prior results and ignore any duplicate
-** rows. Name means: "Distinct Fifo".
-**
-** SRT_Queue Store results in priority queue pDest->iSDParm (really
-** an index). Append a sequence number so that all entries
-** are distinct.
-**
-** SRT_DistQueue Store results in priority queue pDest->iSDParm only if
-** the same record has never been stored before. The
-** index at pDest->iSDParm+1 hold all prior stores.
-*/
-#define SRT_Union 1 /* Store result as keys in an index */
-#define SRT_Except 2 /* Remove result from a UNION index */
-#define SRT_Exists 3 /* Store 1 if the result is not empty */
-#define SRT_Discard 4 /* Do not save the results anywhere */
-#define SRT_Fifo 5 /* Store result as data with an automatic rowid */
-#define SRT_DistFifo 6 /* Like SRT_Fifo, but unique results only */
-#define SRT_Queue 7 /* Store result in an queue */
-#define SRT_DistQueue 8 /* Like SRT_Queue, but unique results only */
-
-/* The ORDER BY clause is ignored for all of the above */
-#define IgnorableOrderby(X) ((X->eDest)<=SRT_DistQueue)
-
-#define SRT_Output 9 /* Output each row of result */
-#define SRT_Mem 10 /* Store result in a memory cell */
-#define SRT_Set 11 /* Store results as keys in an index */
-#define SRT_EphemTab 12 /* Create transient tab and store like SRT_Table */
-#define SRT_Coroutine 13 /* Generate a single row of result */
-#define SRT_Table 14 /* Store result as data with an automatic rowid */
-
-/*
-** An instance of this object describes where to put of the results of
-** a SELECT statement.
-*/
-struct SelectDest {
- u8 eDest; /* How to dispose of the results. On of SRT_* above. */
- char affSdst; /* Affinity used when eDest==SRT_Set */
- int iSDParm; /* A parameter used by the eDest disposal method */
- int iSdst; /* Base register where results are written */
- int nSdst; /* Number of registers allocated */
- ExprList *pOrderBy; /* Key columns for SRT_Queue and SRT_DistQueue */
-};
-
-/*
-** During code generation of statements that do inserts into AUTOINCREMENT
-** tables, the following information is attached to the Table.u.autoInc.p
-** pointer of each autoincrement table to record some side information that
-** the code generator needs. We have to keep per-table autoincrement
-** information in case inserts are done within triggers. Triggers do not
-** normally coordinate their activities, but we do need to coordinate the
-** loading and saving of autoincrement information.
-*/
-struct AutoincInfo {
- AutoincInfo *pNext; /* Next info block in a list of them all */
- Table *pTab; /* Table this info block refers to */
- int iDb; /* Index in sqlite3.aDb[] of database holding pTab */
- int regCtr; /* Memory register holding the rowid counter */
-};
-
-/*
-** Size of the column cache
-*/
-#ifndef SQLITE_N_COLCACHE
-# define SQLITE_N_COLCACHE 10
-#endif
-
-/*
-** At least one instance of the following structure is created for each
-** trigger that may be fired while parsing an INSERT, UPDATE or DELETE
-** statement. All such objects are stored in the linked list headed at
-** Parse.pTriggerPrg and deleted once statement compilation has been
-** completed.
-**
-** A Vdbe sub-program that implements the body and WHEN clause of trigger
-** TriggerPrg.pTrigger, assuming a default ON CONFLICT clause of
-** TriggerPrg.orconf, is stored in the TriggerPrg.pProgram variable.
-** The Parse.pTriggerPrg list never contains two entries with the same
-** values for both pTrigger and orconf.
-**
-** The TriggerPrg.aColmask[0] variable is set to a mask of old.* columns
-** accessed (or set to 0 for triggers fired as a result of INSERT
-** statements). Similarly, the TriggerPrg.aColmask[1] variable is set to
-** a mask of new.* columns used by the program.
-*/
-struct TriggerPrg {
- Trigger *pTrigger; /* Trigger this program was coded from */
- TriggerPrg *pNext; /* Next entry in Parse.pTriggerPrg list */
- SubProgram *pProgram; /* Program implementing pTrigger/orconf */
- int orconf; /* Default ON CONFLICT policy */
- u32 aColmask[2]; /* Masks of old.*, new.* columns accessed */
-};
-
-/*
-** The yDbMask datatype for the bitmask of all attached databases.
-*/
-#if SQLITE_MAX_ATTACHED>30
- typedef unsigned char yDbMask[(SQLITE_MAX_ATTACHED+9)/8];
-# define DbMaskTest(M,I) (((M)[(I)/8]&(1<<((I)&7)))!=0)
-# define DbMaskZero(M) memset((M),0,sizeof(M))
-# define DbMaskSet(M,I) (M)[(I)/8]|=(1<<((I)&7))
-# define DbMaskAllZero(M) sqlite3DbMaskAllZero(M)
-# define DbMaskNonZero(M) (sqlite3DbMaskAllZero(M)==0)
-#else
- typedef unsigned int yDbMask;
-# define DbMaskTest(M,I) (((M)&(((yDbMask)1)<<(I)))!=0)
-# define DbMaskZero(M) (M)=0
-# define DbMaskSet(M,I) (M)|=(((yDbMask)1)<<(I))
-# define DbMaskAllZero(M) (M)==0
-# define DbMaskNonZero(M) (M)!=0
-#endif
-
-/*
-** An SQL parser context. A copy of this structure is passed through
-** the parser and down into all the parser action routine in order to
-** carry around information that is global to the entire parse.
-**
-** The structure is divided into two parts. When the parser and code
-** generate call themselves recursively, the first part of the structure
-** is constant but the second part is reset at the beginning and end of
-** each recursion.
-**
-** The nTableLock and aTableLock variables are only used if the shared-cache
-** feature is enabled (if sqlite3Tsd()->useSharedData is true). They are
-** used to store the set of table-locks required by the statement being
-** compiled. Function sqlite3TableLock() is used to add entries to the
-** list.
-*/
-struct Parse {
- sqlite3 *db; /* The main database structure */
- char *zErrMsg; /* An error message */
- Vdbe *pVdbe; /* An engine for executing database bytecode */
- int rc; /* Return code from execution */
- u8 colNamesSet; /* TRUE after OP_ColumnName has been issued to pVdbe */
- u8 checkSchema; /* Causes schema cookie check after an error */
- u8 nested; /* Number of nested calls to the parser/code generator */
- u8 nTempReg; /* Number of temporary registers in aTempReg[] */
- u8 isMultiWrite; /* True if statement may modify/insert multiple rows */
- u8 mayAbort; /* True if statement may throw an ABORT exception */
- u8 hasCompound; /* Need to invoke convertCompoundSelectToSubquery() */
- u8 okConstFactor; /* OK to factor out constants */
- u8 disableLookaside; /* Number of times lookaside has been disabled */
- u8 nColCache; /* Number of entries in aColCache[] */
- int aTempReg[8]; /* Holding area for temporary registers */
- int nRangeReg; /* Size of the temporary register block */
- int iRangeReg; /* First register in temporary register block */
- int nErr; /* Number of errors seen */
- int nTab; /* Number of previously allocated VDBE cursors */
- int nMem; /* Number of memory cells used so far */
- int nSet; /* Number of sets used so far */
- int nOnce; /* Number of OP_Once instructions so far */
- int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */
- int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */
- int iFixedOp; /* Never back out opcodes iFixedOp-1 or earlier */
- int ckBase; /* Base register of data during check constraints */
- int iSelfTab; /* Table of an index whose exprs are being coded */
- int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */
- int iCacheCnt; /* Counter used to generate aColCache[].lru values */
- int nLabel; /* Number of labels used */
- int *aLabel; /* Space to hold the labels */
- struct yColCache {
- int iTable; /* Table cursor number */
- i16 iColumn; /* Table column number */
- u8 tempReg; /* iReg is a temp register that needs to be freed */
- int iLevel; /* Nesting level */
- int iReg; /* Reg with value of this column. 0 means none. */
- int lru; /* Least recently used entry has the smallest value */
- } aColCache[SQLITE_N_COLCACHE]; /* One for each column cache entry */
- ExprList *pConstExpr;/* Constant expressions */
- Token constraintName;/* Name of the constraint currently being parsed */
- yDbMask writeMask; /* Start a write transaction on these databases */
- yDbMask cookieMask; /* Bitmask of schema verified databases */
- int cookieValue[SQLITE_MAX_ATTACHED+2]; /* Values of cookies to verify */
- int regRowid; /* Register holding rowid of CREATE TABLE entry */
- int regRoot; /* Register holding root page number for new objects */
- int nMaxArg; /* Max args passed to user function by sub-program */
-#if SELECTTRACE_ENABLED
- int nSelect; /* Number of SELECT statements seen */
- int nSelectIndent; /* How far to indent SELECTTRACE() output */
-#endif
-#ifndef SQLITE_OMIT_SHARED_CACHE
- int nTableLock; /* Number of locks in aTableLock */
- TableLock *aTableLock; /* Required table locks for shared-cache mode */
-#endif
- AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */
-
- /* Information used while coding trigger programs. */
- Parse *pToplevel; /* Parse structure for main program (or NULL) */
- Table *pTriggerTab; /* Table triggers are being coded for */
- int addrCrTab; /* Address of OP_CreateTable opcode on CREATE TABLE */
- u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */
- u32 oldmask; /* Mask of old.* columns referenced */
- u32 newmask; /* Mask of new.* columns referenced */
- u8 eTriggerOp; /* TK_UPDATE, TK_INSERT or TK_DELETE */
- u8 eOrconf; /* Default ON CONFLICT policy for trigger steps */
- u8 disableTriggers; /* True to disable triggers */
-
- /************************************************************************
- ** Above is constant between recursions. Below is reset before and after
- ** each recursion. The boundary between these two regions is determined
- ** using offsetof(Parse,nVar) so the nVar field must be the first field
- ** in the recursive region.
- ************************************************************************/
-
- ynVar nVar; /* Number of '?' variables seen in the SQL so far */
- int nzVar; /* Number of available slots in azVar[] */
- u8 iPkSortOrder; /* ASC or DESC for INTEGER PRIMARY KEY */
- u8 explain; /* True if the EXPLAIN flag is found on the query */
-#ifndef SQLITE_OMIT_VIRTUALTABLE
- u8 declareVtab; /* True if inside sqlite3_declare_vtab() */
- int nVtabLock; /* Number of virtual tables to lock */
-#endif
- int nAlias; /* Number of aliased result set columns */
- int nHeight; /* Expression tree height of current sub-select */
-#ifndef SQLITE_OMIT_EXPLAIN
- int iSelectId; /* ID of current select for EXPLAIN output */
- int iNextSelectId; /* Next available select ID for EXPLAIN output */
-#endif
- char **azVar; /* Pointers to names of parameters */
- Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */
- const char *zTail; /* All SQL text past the last semicolon parsed */
- Table *pNewTable; /* A table being constructed by CREATE TABLE */
- Trigger *pNewTrigger; /* Trigger under construct by a CREATE TRIGGER */
- const char *zAuthContext; /* The 6th parameter to db->xAuth callbacks */
- Token sNameToken; /* Token with unqualified schema object name */
- Token sLastToken; /* The last token parsed */
-#ifndef SQLITE_OMIT_VIRTUALTABLE
- Token sArg; /* Complete text of a module argument */
- Table **apVtabLock; /* Pointer to virtual tables needing locking */
-#endif
- Table *pZombieTab; /* List of Table objects to delete after code gen */
- TriggerPrg *pTriggerPrg; /* Linked list of coded triggers */
- With *pWith; /* Current WITH clause, or NULL */
- With *pWithToFree; /* Free this WITH object at the end of the parse */
-};
-
-/*
-** Return true if currently inside an sqlite3_declare_vtab() call.
-*/
-#ifdef SQLITE_OMIT_VIRTUALTABLE
- #define IN_DECLARE_VTAB 0
-#else
- #define IN_DECLARE_VTAB (pParse->declareVtab)
-#endif
-
-/*
-** An instance of the following structure can be declared on a stack and used
-** to save the Parse.zAuthContext value so that it can be restored later.
-*/
-struct AuthContext {
- const char *zAuthContext; /* Put saved Parse.zAuthContext here */
- Parse *pParse; /* The Parse structure */
-};
-
-/*
-** Bitfield flags for P5 value in various opcodes.
-**
-** Value constraints (enforced via assert()):
-** OPFLAG_LENGTHARG == SQLITE_FUNC_LENGTH
-** OPFLAG_TYPEOFARG == SQLITE_FUNC_TYPEOF
-** OPFLAG_BULKCSR == BTREE_BULKLOAD
-** OPFLAG_SEEKEQ == BTREE_SEEK_EQ
-** OPFLAG_FORDELETE == BTREE_FORDELETE
-** OPFLAG_SAVEPOSITION == BTREE_SAVEPOSITION
-** OPFLAG_AUXDELETE == BTREE_AUXDELETE
-*/
-#define OPFLAG_NCHANGE 0x01 /* OP_Insert: Set to update db->nChange */
- /* Also used in P2 (not P5) of OP_Delete */
-#define OPFLAG_EPHEM 0x01 /* OP_Column: Ephemeral output is ok */
-#define OPFLAG_LASTROWID 0x02 /* Set to update db->lastRowid */
-#define OPFLAG_ISUPDATE 0x04 /* This OP_Insert is an sql UPDATE */
-#define OPFLAG_APPEND 0x08 /* This is likely to be an append */
-#define OPFLAG_USESEEKRESULT 0x10 /* Try to avoid a seek in BtreeInsert() */
-#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
-#define OPFLAG_ISNOOP 0x40 /* OP_Delete does pre-update-hook only */
-#endif
-#define OPFLAG_LENGTHARG 0x40 /* OP_Column only used for length() */
-#define OPFLAG_TYPEOFARG 0x80 /* OP_Column only used for typeof() */
-#define OPFLAG_BULKCSR 0x01 /* OP_Open** used to open bulk cursor */
-#define OPFLAG_SEEKEQ 0x02 /* OP_Open** cursor uses EQ seek only */
-#define OPFLAG_FORDELETE 0x08 /* OP_Open should use BTREE_FORDELETE */
-#define OPFLAG_P2ISREG 0x10 /* P2 to OP_Open** is a register number */
-#define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */
-#define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete: keep cursor position */
-#define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */
-
-/*
- * Each trigger present in the database schema is stored as an instance of
- * struct Trigger.
- *
- * Pointers to instances of struct Trigger are stored in two ways.
- * 1. In the "trigHash" hash table (part of the sqlite3* that represents the
- * database). This allows Trigger structures to be retrieved by name.
- * 2. All triggers associated with a single table form a linked list, using the
- * pNext member of struct Trigger. A pointer to the first element of the
- * linked list is stored as the "pTrigger" member of the associated
- * struct Table.
- *
- * The "step_list" member points to the first element of a linked list
- * containing the SQL statements specified as the trigger program.
- */
-struct Trigger {
- char *zName; /* The name of the trigger */
- char *table; /* The table or view to which the trigger applies */
- u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT */
- u8 tr_tm; /* One of TRIGGER_BEFORE, TRIGGER_AFTER */
- Expr *pWhen; /* The WHEN clause of the expression (may be NULL) */
- IdList *pColumns; /* If this is an UPDATE OF trigger,
- the is stored here */
- Schema *pSchema; /* Schema containing the trigger */
- Schema *pTabSchema; /* Schema containing the table */
- TriggerStep *step_list; /* Link list of trigger program steps */
- Trigger *pNext; /* Next trigger associated with the table */
-};
-
-/*
-** A trigger is either a BEFORE or an AFTER trigger. The following constants
-** determine which.
-**
-** If there are multiple triggers, you might of some BEFORE and some AFTER.
-** In that cases, the constants below can be ORed together.
-*/
-#define TRIGGER_BEFORE 1
-#define TRIGGER_AFTER 2
-
-/*
- * An instance of struct TriggerStep is used to store a single SQL statement
- * that is a part of a trigger-program.
- *
- * Instances of struct TriggerStep are stored in a singly linked list (linked
- * using the "pNext" member) referenced by the "step_list" member of the
- * associated struct Trigger instance. The first element of the linked list is
- * the first step of the trigger-program.
- *
- * The "op" member indicates whether this is a "DELETE", "INSERT", "UPDATE" or
- * "SELECT" statement. The meanings of the other members is determined by the
- * value of "op" as follows:
- *
- * (op == TK_INSERT)
- * orconf -> stores the ON CONFLICT algorithm
- * pSelect -> If this is an INSERT INTO ... SELECT ... statement, then
- * this stores a pointer to the SELECT statement. Otherwise NULL.
- * zTarget -> Dequoted name of the table to insert into.
- * pExprList -> If this is an INSERT INTO ... VALUES ... statement, then
- * this stores values to be inserted. Otherwise NULL.
- * pIdList -> If this is an INSERT INTO ... () VALUES ...
- * statement, then this stores the column-names to be
- * inserted into.
- *
- * (op == TK_DELETE)
- * zTarget -> Dequoted name of the table to delete from.
- * pWhere -> The WHERE clause of the DELETE statement if one is specified.
- * Otherwise NULL.
- *
- * (op == TK_UPDATE)
- * zTarget -> Dequoted name of the table to update.
- * pWhere -> The WHERE clause of the UPDATE statement if one is specified.
- * Otherwise NULL.
- * pExprList -> A list of the columns to update and the expressions to update
- * them to. See sqlite3Update() documentation of "pChanges"
- * argument.
- *
- */
-struct TriggerStep {
- u8 op; /* One of TK_DELETE, TK_UPDATE, TK_INSERT, TK_SELECT */
- u8 orconf; /* OE_Rollback etc. */
- Trigger *pTrig; /* The trigger that this step is a part of */
- Select *pSelect; /* SELECT statement or RHS of INSERT INTO SELECT ... */
- char *zTarget; /* Target table for DELETE, UPDATE, INSERT */
- Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */
- ExprList *pExprList; /* SET clause for UPDATE. */
- IdList *pIdList; /* Column names for INSERT */
- TriggerStep *pNext; /* Next in the link-list */
- TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */
-};
-
-/*
-** The following structure contains information used by the sqliteFix...
-** routines as they walk the parse tree to make database references
-** explicit.
-*/
-typedef struct DbFixer DbFixer;
-struct DbFixer {
- Parse *pParse; /* The parsing context. Error messages written here */
- Schema *pSchema; /* Fix items to this schema */
- int bVarOnly; /* Check for variable references only */
- const char *zDb; /* Make sure all objects are contained in this database */
- const char *zType; /* Type of the container - used for error messages */
- const Token *pName; /* Name of the container - used for error messages */
-};
-
-/*
-** An objected used to accumulate the text of a string where we
-** do not necessarily know how big the string will be in the end.
-*/
-struct StrAccum {
- sqlite3 *db; /* Optional database for lookaside. Can be NULL */
- char *zBase; /* A base allocation. Not from malloc. */
- char *zText; /* The string collected so far */
- u32 nChar; /* Length of the string so far */
- u32 nAlloc; /* Amount of space allocated in zText */
- u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */
- u8 accError; /* STRACCUM_NOMEM or STRACCUM_TOOBIG */
- u8 printfFlags; /* SQLITE_PRINTF flags below */
-};
-#define STRACCUM_NOMEM 1
-#define STRACCUM_TOOBIG 2
-#define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */
-#define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */
-#define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */
-
-#define isMalloced(X) (((X)->printfFlags & SQLITE_PRINTF_MALLOCED)!=0)
-
-
-/*
-** A pointer to this structure is used to communicate information
-** from sqlite3Init and OP_ParseSchema into the sqlite3InitCallback.
-*/
-typedef struct {
- sqlite3 *db; /* The database being initialized */
- char **pzErrMsg; /* Error message stored here */
- int iDb; /* 0 for main database. 1 for TEMP, 2.. for ATTACHed */
- int rc; /* Result code stored here */
-} InitData;
-
-/*
-** Structure containing global configuration data for the SQLite library.
-**
-** This structure also contains some state information.
-*/
-struct Sqlite3Config {
- int bMemstat; /* True to enable memory status */
- int bCoreMutex; /* True to enable core mutexing */
- int bFullMutex; /* True to enable full mutexing */
- int bOpenUri; /* True to interpret filenames as URIs */
- int bUseCis; /* Use covering indices for full-scans */
- int mxStrlen; /* Maximum string length */
- int neverCorrupt; /* Database is always well-formed */
- int szLookaside; /* Default lookaside buffer size */
- int nLookaside; /* Default lookaside buffer count */
- int nStmtSpill; /* Stmt-journal spill-to-disk threshold */
- sqlite3_mem_methods m; /* Low-level memory allocation interface */
- sqlite3_mutex_methods mutex; /* Low-level mutex interface */
- sqlite3_pcache_methods2 pcache2; /* Low-level page-cache interface */
- void *pHeap; /* Heap storage space */
- int nHeap; /* Size of pHeap[] */
- int mnReq, mxReq; /* Min and max heap requests sizes */
- sqlite3_int64 szMmap; /* mmap() space per open file */
- sqlite3_int64 mxMmap; /* Maximum value for szMmap */
- void *pScratch; /* Scratch memory */
- int szScratch; /* Size of each scratch buffer */
- int nScratch; /* Number of scratch buffers */
- void *pPage; /* Page cache memory */
- int szPage; /* Size of each page in pPage[] */
- int nPage; /* Number of pages in pPage[] */
- int mxParserStack; /* maximum depth of the parser stack */
- int sharedCacheEnabled; /* true if shared-cache mode enabled */
- u32 szPma; /* Maximum Sorter PMA size */
- /* The above might be initialized to non-zero. The following need to always
- ** initially be zero, however. */
- int isInit; /* True after initialization has finished */
- int inProgress; /* True while initialization in progress */
- int isMutexInit; /* True after mutexes are initialized */
- int isMallocInit; /* True after malloc is initialized */
- int isPCacheInit; /* True after malloc is initialized */
- int nRefInitMutex; /* Number of users of pInitMutex */
- sqlite3_mutex *pInitMutex; /* Mutex used by sqlite3_initialize() */
- void (*xLog)(void*,int,const char*); /* Function for logging */
- void *pLogArg; /* First argument to xLog() */
-#ifdef SQLITE_ENABLE_SQLLOG
- void(*xSqllog)(void*,sqlite3*,const char*, int);
- void *pSqllogArg;
-#endif
-#ifdef SQLITE_VDBE_COVERAGE
- /* The following callback (if not NULL) is invoked on every VDBE branch
- ** operation. Set the callback using SQLITE_TESTCTRL_VDBE_COVERAGE.
- */
- void (*xVdbeBranch)(void*,int iSrcLine,u8 eThis,u8 eMx); /* Callback */
- void *pVdbeBranchArg; /* 1st argument */
-#endif
-#ifndef SQLITE_OMIT_BUILTIN_TEST
- int (*xTestCallback)(int); /* Invoked by sqlite3FaultSim() */
-#endif
- int bLocaltimeFault; /* True to fail localtime() calls */
-};
-
-/*
-** This macro is used inside of assert() statements to indicate that
-** the assert is only valid on a well-formed database. Instead of:
-**
-** assert( X );
-**
-** One writes:
-**
-** assert( X || CORRUPT_DB );
-**
-** CORRUPT_DB is true during normal operation. CORRUPT_DB does not indicate
-** that the database is definitely corrupt, only that it might be corrupt.
-** For most test cases, CORRUPT_DB is set to false using a special
-** sqlite3_test_control(). This enables assert() statements to prove
-** things that are always true for well-formed databases.
-*/
-#define CORRUPT_DB (sqlite3Config.neverCorrupt==0)
-
-/*
-** Context pointer passed down through the tree-walk.
-*/
-struct Walker {
- Parse *pParse; /* Parser context. */
- int (*xExprCallback)(Walker*, Expr*); /* Callback for expressions */
- int (*xSelectCallback)(Walker*,Select*); /* Callback for SELECTs */
- void (*xSelectCallback2)(Walker*,Select*);/* Second callback for SELECTs */
- int walkerDepth; /* Number of subqueries */
- u8 eCode; /* A small processing code */
- union { /* Extra data for callback */
- NameContext *pNC; /* Naming context */
- int n; /* A counter */
- int iCur; /* A cursor number */
- SrcList *pSrcList; /* FROM clause */
- struct SrcCount *pSrcCount; /* Counting column references */
- struct CCurHint *pCCurHint; /* Used by codeCursorHint() */
- int *aiCol; /* array of column indexes */
- } u;
-};
-
-/* Forward declarations */
-SQLITE_PRIVATE int sqlite3WalkExpr(Walker*, Expr*);
-SQLITE_PRIVATE int sqlite3WalkExprList(Walker*, ExprList*);
-SQLITE_PRIVATE int sqlite3WalkSelect(Walker*, Select*);
-SQLITE_PRIVATE int sqlite3WalkSelectExpr(Walker*, Select*);
-SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker*, Select*);
-SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker*, Expr*);
-
-/*
-** Return code from the parse-tree walking primitives and their
-** callbacks.
-*/
-#define WRC_Continue 0 /* Continue down into children */
-#define WRC_Prune 1 /* Omit children but continue walking siblings */
-#define WRC_Abort 2 /* Abandon the tree walk */
-
-/*
-** An instance of this structure represents a set of one or more CTEs
-** (common table expressions) created by a single WITH clause.
-*/
-struct With {
- int nCte; /* Number of CTEs in the WITH clause */
- With *pOuter; /* Containing WITH clause, or NULL */
- struct Cte { /* For each CTE in the WITH clause.... */
- char *zName; /* Name of this CTE */
- ExprList *pCols; /* List of explicit column names, or NULL */
- Select *pSelect; /* The definition of this CTE */
- const char *zCteErr; /* Error message for circular references */
- } a[1];
-};
-
-#ifdef SQLITE_DEBUG
-/*
-** An instance of the TreeView object is used for printing the content of
-** data structures on sqlite3DebugPrintf() using a tree-like view.
-*/
-struct TreeView {
- int iLevel; /* Which level of the tree we are on */
- u8 bLine[100]; /* Draw vertical in column i if bLine[i] is true */
-};
-#endif /* SQLITE_DEBUG */
-
-/*
-** Assuming zIn points to the first byte of a UTF-8 character,
-** advance zIn to point to the first byte of the next UTF-8 character.
-*/
-#define SQLITE_SKIP_UTF8(zIn) { \
- if( (*(zIn++))>=0xc0 ){ \
- while( (*zIn & 0xc0)==0x80 ){ zIn++; } \
- } \
-}
-
-/*
-** The SQLITE_*_BKPT macros are substitutes for the error codes with
-** the same name but without the _BKPT suffix. These macros invoke
-** routines that report the line-number on which the error originated
-** using sqlite3_log(). The routines also provide a convenient place
-** to set a debugger breakpoint.
-*/
-SQLITE_PRIVATE int sqlite3CorruptError(int);
-SQLITE_PRIVATE int sqlite3MisuseError(int);
-SQLITE_PRIVATE int sqlite3CantopenError(int);
-#define SQLITE_CORRUPT_BKPT sqlite3CorruptError(__LINE__)
-#define SQLITE_MISUSE_BKPT sqlite3MisuseError(__LINE__)
-#define SQLITE_CANTOPEN_BKPT sqlite3CantopenError(__LINE__)
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE int sqlite3NomemError(int);
-SQLITE_PRIVATE int sqlite3IoerrnomemError(int);
-# define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__)
-# define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__)
-#else
-# define SQLITE_NOMEM_BKPT SQLITE_NOMEM
-# define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM
-#endif
-
-/*
-** FTS3 and FTS4 both require virtual table support
-*/
-#if defined(SQLITE_OMIT_VIRTUALTABLE)
-# undef SQLITE_ENABLE_FTS3
-# undef SQLITE_ENABLE_FTS4
-#endif
-
-/*
-** FTS4 is really an extension for FTS3. It is enabled using the
-** SQLITE_ENABLE_FTS3 macro. But to avoid confusion we also call
-** the SQLITE_ENABLE_FTS4 macro to serve as an alias for SQLITE_ENABLE_FTS3.
-*/
-#if defined(SQLITE_ENABLE_FTS4) && !defined(SQLITE_ENABLE_FTS3)
-# define SQLITE_ENABLE_FTS3 1
-#endif
-
-/*
-** The ctype.h header is needed for non-ASCII systems. It is also
-** needed by FTS3 when FTS3 is included in the amalgamation.
-*/
-#if !defined(SQLITE_ASCII) || \
- (defined(SQLITE_ENABLE_FTS3) && defined(SQLITE_AMALGAMATION))
-# include
-#endif
-
-/*
-** The following macros mimic the standard library functions toupper(),
-** isspace(), isalnum(), isdigit() and isxdigit(), respectively. The
-** sqlite versions only work for ASCII characters, regardless of locale.
-*/
-#ifdef SQLITE_ASCII
-# define sqlite3Toupper(x) ((x)&~(sqlite3CtypeMap[(unsigned char)(x)]&0x20))
-# define sqlite3Isspace(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x01)
-# define sqlite3Isalnum(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x06)
-# define sqlite3Isalpha(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x02)
-# define sqlite3Isdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x04)
-# define sqlite3Isxdigit(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x08)
-# define sqlite3Tolower(x) (sqlite3UpperToLower[(unsigned char)(x)])
-# define sqlite3Isquote(x) (sqlite3CtypeMap[(unsigned char)(x)]&0x80)
-#else
-# define sqlite3Toupper(x) toupper((unsigned char)(x))
-# define sqlite3Isspace(x) isspace((unsigned char)(x))
-# define sqlite3Isalnum(x) isalnum((unsigned char)(x))
-# define sqlite3Isalpha(x) isalpha((unsigned char)(x))
-# define sqlite3Isdigit(x) isdigit((unsigned char)(x))
-# define sqlite3Isxdigit(x) isxdigit((unsigned char)(x))
-# define sqlite3Tolower(x) tolower((unsigned char)(x))
-# define sqlite3Isquote(x) ((x)=='"'||(x)=='\''||(x)=='['||(x)=='`')
-#endif
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-SQLITE_PRIVATE int sqlite3IsIdChar(u8);
-#endif
-
-/*
-** Internal function prototypes
-*/
-SQLITE_PRIVATE int sqlite3StrICmp(const char*,const char*);
-SQLITE_PRIVATE int sqlite3Strlen30(const char*);
-SQLITE_PRIVATE char *sqlite3ColumnType(Column*,char*);
-#define sqlite3StrNICmp sqlite3_strnicmp
-
-SQLITE_PRIVATE int sqlite3MallocInit(void);
-SQLITE_PRIVATE void sqlite3MallocEnd(void);
-SQLITE_PRIVATE void *sqlite3Malloc(u64);
-SQLITE_PRIVATE void *sqlite3MallocZero(u64);
-SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3*, u64);
-SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3*, u64);
-SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3*, u64);
-SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3*,const char*);
-SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64);
-SQLITE_PRIVATE void *sqlite3Realloc(void*, u64);
-SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64);
-SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64);
-SQLITE_PRIVATE void sqlite3DbFree(sqlite3*, void*);
-SQLITE_PRIVATE int sqlite3MallocSize(void*);
-SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, void*);
-SQLITE_PRIVATE void *sqlite3ScratchMalloc(int);
-SQLITE_PRIVATE void sqlite3ScratchFree(void*);
-SQLITE_PRIVATE void *sqlite3PageMalloc(int);
-SQLITE_PRIVATE void sqlite3PageFree(void*);
-SQLITE_PRIVATE void sqlite3MemSetDefault(void);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-SQLITE_PRIVATE void sqlite3BenignMallocHooks(void (*)(void), void (*)(void));
-#endif
-SQLITE_PRIVATE int sqlite3HeapNearlyFull(void);
-
-/*
-** On systems with ample stack space and that support alloca(), make
-** use of alloca() to obtain space for large automatic objects. By default,
-** obtain space from malloc().
-**
-** The alloca() routine never returns NULL. This will cause code paths
-** that deal with sqlite3StackAlloc() failures to be unreachable.
-*/
-#ifdef SQLITE_USE_ALLOCA
-# define sqlite3StackAllocRaw(D,N) alloca(N)
-# define sqlite3StackAllocZero(D,N) memset(alloca(N), 0, N)
-# define sqlite3StackFree(D,P)
-#else
-# define sqlite3StackAllocRaw(D,N) sqlite3DbMallocRaw(D,N)
-# define sqlite3StackAllocZero(D,N) sqlite3DbMallocZero(D,N)
-# define sqlite3StackFree(D,P) sqlite3DbFree(D,P)
-#endif
-
-#ifdef SQLITE_ENABLE_MEMSYS3
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void);
-#endif
-#ifdef SQLITE_ENABLE_MEMSYS5
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys5(void);
-#endif
-
-
-#ifndef SQLITE_MUTEX_OMIT
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void);
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3NoopMutex(void);
-SQLITE_PRIVATE sqlite3_mutex *sqlite3MutexAlloc(int);
-SQLITE_PRIVATE int sqlite3MutexInit(void);
-SQLITE_PRIVATE int sqlite3MutexEnd(void);
-#endif
-#if !defined(SQLITE_MUTEX_OMIT) && !defined(SQLITE_MUTEX_NOOP)
-SQLITE_PRIVATE void sqlite3MemoryBarrier(void);
-#else
-# define sqlite3MemoryBarrier()
-#endif
-
-SQLITE_PRIVATE sqlite3_int64 sqlite3StatusValue(int);
-SQLITE_PRIVATE void sqlite3StatusUp(int, int);
-SQLITE_PRIVATE void sqlite3StatusDown(int, int);
-SQLITE_PRIVATE void sqlite3StatusHighwater(int, int);
-
-/* Access to mutexes used by sqlite3_status() */
-SQLITE_PRIVATE sqlite3_mutex *sqlite3Pcache1Mutex(void);
-SQLITE_PRIVATE sqlite3_mutex *sqlite3MallocMutex(void);
-
-#ifndef SQLITE_OMIT_FLOATING_POINT
-SQLITE_PRIVATE int sqlite3IsNaN(double);
-#else
-# define sqlite3IsNaN(X) 0
-#endif
-
-/*
-** An instance of the following structure holds information about SQL
-** functions arguments that are the parameters to the printf() function.
-*/
-struct PrintfArguments {
- int nArg; /* Total number of arguments */
- int nUsed; /* Number of arguments used so far */
- sqlite3_value **apArg; /* The argument values */
-};
-
-SQLITE_PRIVATE void sqlite3VXPrintf(StrAccum*, const char*, va_list);
-SQLITE_PRIVATE void sqlite3XPrintf(StrAccum*, const char*, ...);
-SQLITE_PRIVATE char *sqlite3MPrintf(sqlite3*,const char*, ...);
-SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3*,const char*, va_list);
-#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
-SQLITE_PRIVATE void sqlite3DebugPrintf(const char*, ...);
-#endif
-#if defined(SQLITE_TEST)
-SQLITE_PRIVATE void *sqlite3TestTextToPtr(const char*);
-#endif
-
-#if defined(SQLITE_DEBUG)
-SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView*, const Expr*, u8);
-SQLITE_PRIVATE void sqlite3TreeViewExprList(TreeView*, const ExprList*, u8, const char*);
-SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView*, const Select*, u8);
-SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView*, const With*, u8);
-#endif
-
-
-SQLITE_PRIVATE void sqlite3SetString(char **, sqlite3*, const char*);
-SQLITE_PRIVATE void sqlite3ErrorMsg(Parse*, const char*, ...);
-SQLITE_PRIVATE void sqlite3Dequote(char*);
-SQLITE_PRIVATE void sqlite3TokenInit(Token*,char*);
-SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char*, int);
-SQLITE_PRIVATE int sqlite3RunParser(Parse*, const char*, char **);
-SQLITE_PRIVATE void sqlite3FinishCoding(Parse*);
-SQLITE_PRIVATE int sqlite3GetTempReg(Parse*);
-SQLITE_PRIVATE void sqlite3ReleaseTempReg(Parse*,int);
-SQLITE_PRIVATE int sqlite3GetTempRange(Parse*,int);
-SQLITE_PRIVATE void sqlite3ReleaseTempRange(Parse*,int,int);
-SQLITE_PRIVATE void sqlite3ClearTempRegCache(Parse*);
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE int sqlite3NoTempsInRange(Parse*,int,int);
-#endif
-SQLITE_PRIVATE Expr *sqlite3ExprAlloc(sqlite3*,int,const Token*,int);
-SQLITE_PRIVATE Expr *sqlite3Expr(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3ExprAttachSubtrees(sqlite3*,Expr*,Expr*,Expr*);
-SQLITE_PRIVATE Expr *sqlite3PExpr(Parse*, int, Expr*, Expr*, const Token*);
-SQLITE_PRIVATE void sqlite3PExprAddSelect(Parse*, Expr*, Select*);
-SQLITE_PRIVATE Expr *sqlite3ExprAnd(sqlite3*,Expr*, Expr*);
-SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse*,ExprList*, Token*);
-SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse*, Expr*);
-SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3*, Expr*);
-SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*);
-SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int);
-SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int);
-SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*);
-SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3*, ExprList*);
-SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList*);
-SQLITE_PRIVATE int sqlite3Init(sqlite3*, char**);
-SQLITE_PRIVATE int sqlite3InitCallback(void*, int, char**, char**);
-SQLITE_PRIVATE void sqlite3Pragma(Parse*,Token*,Token*,Token*,int);
-SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3*);
-SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3*,int);
-SQLITE_PRIVATE void sqlite3CollapseDatabaseArray(sqlite3*);
-SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3*);
-SQLITE_PRIVATE void sqlite3DeleteColumnNames(sqlite3*,Table*);
-SQLITE_PRIVATE int sqlite3ColumnsFromExprList(Parse*,ExprList*,i16*,Column**);
-SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation(Parse*,Table*,Select*);
-SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse*,Select*);
-SQLITE_PRIVATE void sqlite3OpenMasterTable(Parse *, int);
-SQLITE_PRIVATE Index *sqlite3PrimaryKeyIndex(Table*);
-SQLITE_PRIVATE i16 sqlite3ColumnOfIndex(Index*, i16);
-SQLITE_PRIVATE void sqlite3StartTable(Parse*,Token*,Token*,int,int,int,int);
-#if SQLITE_ENABLE_HIDDEN_COLUMNS
-SQLITE_PRIVATE void sqlite3ColumnPropertiesFromName(Table*, Column*);
-#else
-# define sqlite3ColumnPropertiesFromName(T,C) /* no-op */
-#endif
-SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*,Token*);
-SQLITE_PRIVATE void sqlite3AddNotNull(Parse*, int);
-SQLITE_PRIVATE void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int);
-SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*);
-SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*);
-SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*);
-SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*);
-SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*,
- sqlite3_vfs**,char**,char **);
-SQLITE_PRIVATE Btree *sqlite3DbNameToBtree(sqlite3*,const char*);
-SQLITE_PRIVATE int sqlite3CodeOnce(Parse *);
-
-#ifdef SQLITE_OMIT_BUILTIN_TEST
-# define sqlite3FaultSim(X) SQLITE_OK
-#else
-SQLITE_PRIVATE int sqlite3FaultSim(int);
-#endif
-
-SQLITE_PRIVATE Bitvec *sqlite3BitvecCreate(u32);
-SQLITE_PRIVATE int sqlite3BitvecTest(Bitvec*, u32);
-SQLITE_PRIVATE int sqlite3BitvecTestNotNull(Bitvec*, u32);
-SQLITE_PRIVATE int sqlite3BitvecSet(Bitvec*, u32);
-SQLITE_PRIVATE void sqlite3BitvecClear(Bitvec*, u32, void*);
-SQLITE_PRIVATE void sqlite3BitvecDestroy(Bitvec*);
-SQLITE_PRIVATE u32 sqlite3BitvecSize(Bitvec*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-SQLITE_PRIVATE int sqlite3BitvecBuiltinTest(int,int*);
-#endif
-
-SQLITE_PRIVATE RowSet *sqlite3RowSetInit(sqlite3*, void*, unsigned int);
-SQLITE_PRIVATE void sqlite3RowSetClear(RowSet*);
-SQLITE_PRIVATE void sqlite3RowSetInsert(RowSet*, i64);
-SQLITE_PRIVATE int sqlite3RowSetTest(RowSet*, int iBatch, i64);
-SQLITE_PRIVATE int sqlite3RowSetNext(RowSet*, i64*);
-
-SQLITE_PRIVATE void sqlite3CreateView(Parse*,Token*,Token*,Token*,ExprList*,Select*,int,int);
-
-#if !defined(SQLITE_OMIT_VIEW) || !defined(SQLITE_OMIT_VIRTUALTABLE)
-SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse*,Table*);
-#else
-# define sqlite3ViewGetColumnNames(A,B) 0
-#endif
-
-#if SQLITE_MAX_ATTACHED>30
-SQLITE_PRIVATE int sqlite3DbMaskAllZero(yDbMask);
-#endif
-SQLITE_PRIVATE void sqlite3DropTable(Parse*, SrcList*, int, int);
-SQLITE_PRIVATE void sqlite3CodeDropTable(Parse*, Table*, int, int);
-SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3*, Table*);
-#ifndef SQLITE_OMIT_AUTOINCREMENT
-SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse);
-SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse);
-#else
-# define sqlite3AutoincrementBegin(X)
-# define sqlite3AutoincrementEnd(X)
-#endif
-SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int);
-SQLITE_PRIVATE void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*);
-SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*);
-SQLITE_PRIVATE int sqlite3IdListIndex(IdList*,const char*);
-SQLITE_PRIVATE SrcList *sqlite3SrcListEnlarge(sqlite3*, SrcList*, int, int);
-SQLITE_PRIVATE SrcList *sqlite3SrcListAppend(sqlite3*, SrcList*, Token*, Token*);
-SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm(Parse*, SrcList*, Token*, Token*,
- Token*, Select*, Expr*, IdList*);
-SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *, SrcList *, Token *);
-SQLITE_PRIVATE void sqlite3SrcListFuncArgs(Parse*, SrcList*, ExprList*);
-SQLITE_PRIVATE int sqlite3IndexedByLookup(Parse *, struct SrcList_item *);
-SQLITE_PRIVATE void sqlite3SrcListShiftJoinType(SrcList*);
-SQLITE_PRIVATE void sqlite3SrcListAssignCursors(Parse*, SrcList*);
-SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3*, IdList*);
-SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3*, SrcList*);
-SQLITE_PRIVATE Index *sqlite3AllocateIndexObject(sqlite3*,i16,int,char**);
-SQLITE_PRIVATE Index *sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,int,Token*,
- Expr*, int, int);
-SQLITE_PRIVATE void sqlite3DropIndex(Parse*, SrcList*, int);
-SQLITE_PRIVATE int sqlite3Select(Parse*, Select*, SelectDest*);
-SQLITE_PRIVATE Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*,
- Expr*,ExprList*,u32,Expr*,Expr*);
-SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3*, Select*);
-SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse*, SrcList*);
-SQLITE_PRIVATE int sqlite3IsReadOnly(Parse*, Table*, int);
-SQLITE_PRIVATE void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int);
-#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY)
-SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*);
-#endif
-SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*);
-SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int);
-SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int);
-SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*);
-SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereIsDistinct(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereIsOrdered(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereIsSorted(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereContinueLabel(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereBreakLabel(WhereInfo*);
-SQLITE_PRIVATE int sqlite3WhereOkOnePass(WhereInfo*, int*);
-#define ONEPASS_OFF 0 /* Use of ONEPASS not allowed */
-#define ONEPASS_SINGLE 1 /* ONEPASS valid for a single row update */
-#define ONEPASS_MULTI 2 /* ONEPASS is valid for multiple rows */
-SQLITE_PRIVATE void sqlite3ExprCodeLoadIndexColumn(Parse*, Index*, int, int, int);
-SQLITE_PRIVATE int sqlite3ExprCodeGetColumn(Parse*, Table*, int, int, int, u8);
-SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg(Parse*, Table*, int, int, int);
-SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable(Vdbe*, Table*, int, int, int);
-SQLITE_PRIVATE void sqlite3ExprCodeMove(Parse*, int, int, int);
-SQLITE_PRIVATE void sqlite3ExprCacheStore(Parse*, int, int, int);
-SQLITE_PRIVATE void sqlite3ExprCachePush(Parse*);
-SQLITE_PRIVATE void sqlite3ExprCachePop(Parse*);
-SQLITE_PRIVATE void sqlite3ExprCacheRemove(Parse*, int, int);
-SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse*);
-SQLITE_PRIVATE void sqlite3ExprCacheAffinityChange(Parse*, int, int);
-SQLITE_PRIVATE void sqlite3ExprCode(Parse*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprCodeCopy(Parse*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprCodeFactorable(Parse*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprCodeAtInit(Parse*, Expr*, int, u8);
-SQLITE_PRIVATE int sqlite3ExprCodeTemp(Parse*, Expr*, int*);
-SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprCodeAndCache(Parse*, Expr*, int);
-SQLITE_PRIVATE int sqlite3ExprCodeExprList(Parse*, ExprList*, int, int, u8);
-#define SQLITE_ECEL_DUP 0x01 /* Deep, not shallow copies */
-#define SQLITE_ECEL_FACTOR 0x02 /* Factor out constant terms */
-#define SQLITE_ECEL_REF 0x04 /* Use ExprList.u.x.iOrderByCol */
-SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse*, Expr*, int, int);
-SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse*, Expr*, int, int);
-SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse*, Expr*, int, int);
-SQLITE_PRIVATE Table *sqlite3FindTable(sqlite3*,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTable(Parse*,int isView,const char*, const char*);
-SQLITE_PRIVATE Table *sqlite3LocateTableItem(Parse*,int isView,struct SrcList_item *);
-SQLITE_PRIVATE Index *sqlite3FindIndex(sqlite3*,const char*, const char*);
-SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*);
-SQLITE_PRIVATE void sqlite3Vacuum(Parse*);
-SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*);
-SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3*, Token*);
-SQLITE_PRIVATE int sqlite3ExprCompare(Expr*, Expr*, int);
-SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int);
-SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr*, Expr*, int);
-SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*);
-SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*);
-SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr*, SrcList*);
-SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse*);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-SQLITE_PRIVATE void sqlite3PrngSaveState(void);
-SQLITE_PRIVATE void sqlite3PrngRestoreState(void);
-#endif
-SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3*,int);
-SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse*, int);
-SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb);
-SQLITE_PRIVATE void sqlite3BeginTransaction(Parse*, int);
-SQLITE_PRIVATE void sqlite3CommitTransaction(Parse*);
-SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse*);
-SQLITE_PRIVATE void sqlite3Savepoint(Parse*, int, Token*);
-SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *);
-SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3*);
-SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr*);
-SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr*);
-SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*, u8);
-SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr*,int);
-#ifdef SQLITE_ENABLE_CURSOR_HINTS
-SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr*);
-#endif
-SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr*, int*);
-SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr*);
-SQLITE_PRIVATE int sqlite3ExprNeedsNoAffinityChange(const Expr*, char);
-SQLITE_PRIVATE int sqlite3IsRowid(const char*);
-SQLITE_PRIVATE void sqlite3GenerateRowDelete(
- Parse*,Table*,Trigger*,int,int,int,i16,u8,u8,u8,int);
-SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int*, int);
-SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int);
-SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int);
-SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int,
- u8,u8,int,int*,int*);
-SQLITE_PRIVATE void sqlite3CompleteInsertion(Parse*,Table*,int,int,int,int*,int,int,int);
-SQLITE_PRIVATE int sqlite3OpenTableAndIndices(Parse*, Table*, int, u8, int, u8*, int*, int*);
-SQLITE_PRIVATE void sqlite3BeginWriteOperation(Parse*, int, int);
-SQLITE_PRIVATE void sqlite3MultiWrite(Parse*);
-SQLITE_PRIVATE void sqlite3MayAbort(Parse*);
-SQLITE_PRIVATE void sqlite3HaltConstraint(Parse*, int, int, char*, i8, u8);
-SQLITE_PRIVATE void sqlite3UniqueConstraint(Parse*, int, Index*);
-SQLITE_PRIVATE void sqlite3RowidConstraint(Parse*, int, Table*);
-SQLITE_PRIVATE Expr *sqlite3ExprDup(sqlite3*,Expr*,int);
-SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3*,ExprList*,int);
-SQLITE_PRIVATE SrcList *sqlite3SrcListDup(sqlite3*,SrcList*,int);
-SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3*,IdList*);
-SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3*,Select*,int);
-#if SELECTTRACE_ENABLED
-SQLITE_PRIVATE void sqlite3SelectSetName(Select*,const char*);
-#else
-# define sqlite3SelectSetName(A,B)
-#endif
-SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs(FuncDef*,int);
-SQLITE_PRIVATE FuncDef *sqlite3FindFunction(sqlite3*,const char*,int,u8,u8);
-SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void);
-SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void);
-SQLITE_PRIVATE void sqlite3RegisterPerConnectionBuiltinFunctions(sqlite3*);
-SQLITE_PRIVATE int sqlite3SafetyCheckOk(sqlite3*);
-SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3*);
-SQLITE_PRIVATE void sqlite3ChangeCookie(Parse*, int);
-
-#if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER)
-SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, int);
-#endif
-
-#ifndef SQLITE_OMIT_TRIGGER
-SQLITE_PRIVATE void sqlite3BeginTrigger(Parse*, Token*,Token*,int,int,IdList*,SrcList*,
- Expr*,int, int);
-SQLITE_PRIVATE void sqlite3FinishTrigger(Parse*, TriggerStep*, Token*);
-SQLITE_PRIVATE void sqlite3DropTrigger(Parse*, SrcList*, int);
-SQLITE_PRIVATE void sqlite3DropTriggerPtr(Parse*, Trigger*);
-SQLITE_PRIVATE Trigger *sqlite3TriggersExist(Parse *, Table*, int, ExprList*, int *pMask);
-SQLITE_PRIVATE Trigger *sqlite3TriggerList(Parse *, Table *);
-SQLITE_PRIVATE void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, int, Table *,
- int, int, int);
-SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int);
- void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*);
-SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*,
- Select*,u8);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8);
-SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*);
-SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3*, Trigger*);
-SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*);
-SQLITE_PRIVATE u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int);
-# define sqlite3ParseToplevel(p) ((p)->pToplevel ? (p)->pToplevel : (p))
-# define sqlite3IsToplevel(p) ((p)->pToplevel==0)
-#else
-# define sqlite3TriggersExist(B,C,D,E,F) 0
-# define sqlite3DeleteTrigger(A,B)
-# define sqlite3DropTriggerPtr(A,B)
-# define sqlite3UnlinkAndDeleteTrigger(A,B,C)
-# define sqlite3CodeRowTrigger(A,B,C,D,E,F,G,H,I)
-# define sqlite3CodeRowTriggerDirect(A,B,C,D,E,F)
-# define sqlite3TriggerList(X, Y) 0
-# define sqlite3ParseToplevel(p) p
-# define sqlite3IsToplevel(p) 1
-# define sqlite3TriggerColmask(A,B,C,D,E,F,G) 0
-#endif
-
-SQLITE_PRIVATE int sqlite3JoinType(Parse*, Token*, Token*, Token*);
-SQLITE_PRIVATE void sqlite3CreateForeignKey(Parse*, ExprList*, Token*, ExprList*, int);
-SQLITE_PRIVATE void sqlite3DeferForeignKey(Parse*, int);
-#ifndef SQLITE_OMIT_AUTHORIZATION
-SQLITE_PRIVATE void sqlite3AuthRead(Parse*,Expr*,Schema*,SrcList*);
-SQLITE_PRIVATE int sqlite3AuthCheck(Parse*,int, const char*, const char*, const char*);
-SQLITE_PRIVATE void sqlite3AuthContextPush(Parse*, AuthContext*, const char*);
-SQLITE_PRIVATE void sqlite3AuthContextPop(AuthContext*);
-SQLITE_PRIVATE int sqlite3AuthReadCol(Parse*, const char *, const char *, int);
-#else
-# define sqlite3AuthRead(a,b,c,d)
-# define sqlite3AuthCheck(a,b,c,d,e) SQLITE_OK
-# define sqlite3AuthContextPush(a,b,c)
-# define sqlite3AuthContextPop(a) ((void)(a))
-#endif
-SQLITE_PRIVATE void sqlite3Attach(Parse*, Expr*, Expr*, Expr*);
-SQLITE_PRIVATE void sqlite3Detach(Parse*, Expr*);
-SQLITE_PRIVATE void sqlite3FixInit(DbFixer*, Parse*, int, const char*, const Token*);
-SQLITE_PRIVATE int sqlite3FixSrcList(DbFixer*, SrcList*);
-SQLITE_PRIVATE int sqlite3FixSelect(DbFixer*, Select*);
-SQLITE_PRIVATE int sqlite3FixExpr(DbFixer*, Expr*);
-SQLITE_PRIVATE int sqlite3FixExprList(DbFixer*, ExprList*);
-SQLITE_PRIVATE int sqlite3FixTriggerStep(DbFixer*, TriggerStep*);
-SQLITE_PRIVATE int sqlite3AtoF(const char *z, double*, int, u8);
-SQLITE_PRIVATE int sqlite3GetInt32(const char *, int*);
-SQLITE_PRIVATE int sqlite3Atoi(const char*);
-SQLITE_PRIVATE int sqlite3Utf16ByteLen(const void *pData, int nChar);
-SQLITE_PRIVATE int sqlite3Utf8CharLen(const char *pData, int nByte);
-SQLITE_PRIVATE u32 sqlite3Utf8Read(const u8**);
-SQLITE_PRIVATE LogEst sqlite3LogEst(u64);
-SQLITE_PRIVATE LogEst sqlite3LogEstAdd(LogEst,LogEst);
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-SQLITE_PRIVATE LogEst sqlite3LogEstFromDouble(double);
-#endif
-#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
- defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \
- defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
-SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst);
-#endif
-
-/*
-** Routines to read and write variable-length integers. These used to
-** be defined locally, but now we use the varint routines in the util.c
-** file.
-*/
-SQLITE_PRIVATE int sqlite3PutVarint(unsigned char*, u64);
-SQLITE_PRIVATE u8 sqlite3GetVarint(const unsigned char *, u64 *);
-SQLITE_PRIVATE u8 sqlite3GetVarint32(const unsigned char *, u32 *);
-SQLITE_PRIVATE int sqlite3VarintLen(u64 v);
-
-/*
-** The common case is for a varint to be a single byte. They following
-** macros handle the common case without a procedure call, but then call
-** the procedure for larger varints.
-*/
-#define getVarint32(A,B) \
- (u8)((*(A)<(u8)0x80)?((B)=(u32)*(A)),1:sqlite3GetVarint32((A),(u32 *)&(B)))
-#define putVarint32(A,B) \
- (u8)(((u32)(B)<(u32)0x80)?(*(A)=(unsigned char)(B)),1:\
- sqlite3PutVarint((A),(B)))
-#define getVarint sqlite3GetVarint
-#define putVarint sqlite3PutVarint
-
-
-SQLITE_PRIVATE const char *sqlite3IndexAffinityStr(sqlite3*, Index*);
-SQLITE_PRIVATE void sqlite3TableAffinity(Vdbe*, Table*, int);
-SQLITE_PRIVATE char sqlite3CompareAffinity(Expr *pExpr, char aff2);
-SQLITE_PRIVATE int sqlite3IndexAffinityOk(Expr *pExpr, char idx_affinity);
-SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr);
-SQLITE_PRIVATE int sqlite3Atoi64(const char*, i64*, int, u8);
-SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char*, i64*);
-SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3*, int, const char*,...);
-SQLITE_PRIVATE void sqlite3Error(sqlite3*,int);
-SQLITE_PRIVATE void sqlite3SystemError(sqlite3*,int);
-SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3*, const char *z, int n);
-SQLITE_PRIVATE u8 sqlite3HexToInt(int h);
-SQLITE_PRIVATE int sqlite3TwoPartName(Parse *, Token *, Token *, Token **);
-
-#if defined(SQLITE_NEED_ERR_NAME)
-SQLITE_PRIVATE const char *sqlite3ErrName(int);
-#endif
-
-SQLITE_PRIVATE const char *sqlite3ErrStr(int);
-SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse);
-SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int);
-SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName);
-SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr);
-SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int);
-SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*);
-SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*);
-SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *, CollSeq *);
-SQLITE_PRIVATE int sqlite3CheckObjectName(Parse *, const char *);
-SQLITE_PRIVATE void sqlite3VdbeSetChanges(sqlite3 *, int);
-SQLITE_PRIVATE int sqlite3AddInt64(i64*,i64);
-SQLITE_PRIVATE int sqlite3SubInt64(i64*,i64);
-SQLITE_PRIVATE int sqlite3MulInt64(i64*,i64);
-SQLITE_PRIVATE int sqlite3AbsInt32(int);
-#ifdef SQLITE_ENABLE_8_3_NAMES
-SQLITE_PRIVATE void sqlite3FileSuffix3(const char*, char*);
-#else
-# define sqlite3FileSuffix3(X,Y)
-#endif
-SQLITE_PRIVATE u8 sqlite3GetBoolean(const char *z,u8);
-
-SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value*, u8);
-SQLITE_PRIVATE int sqlite3ValueBytes(sqlite3_value*, u8);
-SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8,
- void(*)(void*));
-SQLITE_PRIVATE void sqlite3ValueSetNull(sqlite3_value*);
-SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value*);
-SQLITE_PRIVATE sqlite3_value *sqlite3ValueNew(sqlite3 *);
-SQLITE_PRIVATE char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8);
-SQLITE_PRIVATE int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **);
-SQLITE_PRIVATE void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8);
-#ifndef SQLITE_AMALGAMATION
-SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[];
-SQLITE_PRIVATE const char sqlite3StrBINARY[];
-SQLITE_PRIVATE const unsigned char sqlite3UpperToLower[];
-SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[];
-SQLITE_PRIVATE const Token sqlite3IntTokens[];
-SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config;
-SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
-#ifndef SQLITE_OMIT_WSD
-SQLITE_PRIVATE int sqlite3PendingByte;
-#endif
-#endif
-SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3*, int, int, int);
-SQLITE_PRIVATE void sqlite3Reindex(Parse*, Token*, Token*);
-SQLITE_PRIVATE void sqlite3AlterFunctions(void);
-SQLITE_PRIVATE void sqlite3AlterRenameTable(Parse*, SrcList*, Token*);
-SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *, int *);
-SQLITE_PRIVATE void sqlite3NestedParse(Parse*, const char*, ...);
-SQLITE_PRIVATE void sqlite3ExpirePreparedStatements(sqlite3*);
-SQLITE_PRIVATE int sqlite3CodeSubselect(Parse *, Expr *, int, int);
-SQLITE_PRIVATE void sqlite3SelectPrep(Parse*, Select*, NameContext*);
-SQLITE_PRIVATE void sqlite3SelectWrongNumTermsError(Parse *pParse, Select *p);
-SQLITE_PRIVATE int sqlite3MatchSpanName(const char*, const char*, const char*, const char*);
-SQLITE_PRIVATE int sqlite3ResolveExprNames(NameContext*, Expr*);
-SQLITE_PRIVATE int sqlite3ResolveExprListNames(NameContext*, ExprList*);
-SQLITE_PRIVATE void sqlite3ResolveSelectNames(Parse*, Select*, NameContext*);
-SQLITE_PRIVATE void sqlite3ResolveSelfReference(Parse*,Table*,int,Expr*,ExprList*);
-SQLITE_PRIVATE int sqlite3ResolveOrderGroupBy(Parse*, Select*, ExprList*, const char*);
-SQLITE_PRIVATE void sqlite3ColumnDefault(Vdbe *, Table *, int, int);
-SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *, Token *);
-SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *, SrcList *);
-SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*);
-SQLITE_PRIVATE char sqlite3AffinityType(const char*, u8*);
-SQLITE_PRIVATE void sqlite3Analyze(Parse*, Token*, Token*);
-SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*);
-SQLITE_PRIVATE int sqlite3FindDb(sqlite3*, Token*);
-SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *, const char *);
-SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3*,int iDB);
-SQLITE_PRIVATE void sqlite3DeleteIndexSamples(sqlite3*,Index*);
-SQLITE_PRIVATE void sqlite3DefaultRowEst(Index*);
-SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3*, int);
-SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3*,Expr*,int*,char*);
-SQLITE_PRIVATE void sqlite3SchemaClear(void *);
-SQLITE_PRIVATE Schema *sqlite3SchemaGet(sqlite3 *, Btree *);
-SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *);
-SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoAlloc(sqlite3*,int,int);
-SQLITE_PRIVATE void sqlite3KeyInfoUnref(KeyInfo*);
-SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoRef(KeyInfo*);
-SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoOfIndex(Parse*, Index*);
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE int sqlite3KeyInfoIsWriteable(KeyInfo*);
-#endif
-SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *,
- void (*)(sqlite3_context*,int,sqlite3_value **),
- void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*),
- FuncDestructor *pDestructor
-);
-SQLITE_PRIVATE void sqlite3OomFault(sqlite3*);
-SQLITE_PRIVATE void sqlite3OomClear(sqlite3*);
-SQLITE_PRIVATE int sqlite3ApiExit(sqlite3 *db, int);
-SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *);
-
-SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int);
-SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum*,const char*,int);
-SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum*,const char*);
-SQLITE_PRIVATE void sqlite3AppendChar(StrAccum*,int,char);
-SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum*);
-SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum*);
-SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest*,int,int);
-SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int);
-
-SQLITE_PRIVATE void sqlite3BackupRestart(sqlite3_backup *);
-SQLITE_PRIVATE void sqlite3BackupUpdate(sqlite3_backup *, Pgno, const u8 *);
-
-#ifdef SQLITE_ENABLE_STAT3_OR_STAT4
-SQLITE_PRIVATE void sqlite3AnalyzeFunctions(void);
-SQLITE_PRIVATE int sqlite3Stat4ProbeSetValue(Parse*,Index*,UnpackedRecord**,Expr*,u8,int,int*);
-SQLITE_PRIVATE int sqlite3Stat4ValueFromExpr(Parse*, Expr*, u8, sqlite3_value**);
-SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord*);
-SQLITE_PRIVATE int sqlite3Stat4Column(sqlite3*, const void*, int, int, sqlite3_value**);
-#endif
-
-/*
-** The interface to the LEMON-generated parser
-*/
-SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64));
-SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*));
-SQLITE_PRIVATE void sqlite3Parser(void*, int, Token, Parse*);
-#ifdef YYTRACKMAXSTACKDEPTH
-SQLITE_PRIVATE int sqlite3ParserStackPeak(void*);
-#endif
-
-SQLITE_PRIVATE void sqlite3AutoLoadExtensions(sqlite3*);
-#ifndef SQLITE_OMIT_LOAD_EXTENSION
-SQLITE_PRIVATE void sqlite3CloseExtensions(sqlite3*);
-#else
-# define sqlite3CloseExtensions(X)
-#endif
-
-#ifndef SQLITE_OMIT_SHARED_CACHE
-SQLITE_PRIVATE void sqlite3TableLock(Parse *, int, int, u8, const char *);
-#else
- #define sqlite3TableLock(v,w,x,y,z)
-#endif
-
-#ifdef SQLITE_TEST
-SQLITE_PRIVATE int sqlite3Utf8To8(unsigned char*);
-#endif
-
-#ifdef SQLITE_OMIT_VIRTUALTABLE
-# define sqlite3VtabClear(Y)
-# define sqlite3VtabSync(X,Y) SQLITE_OK
-# define sqlite3VtabRollback(X)
-# define sqlite3VtabCommit(X)
-# define sqlite3VtabInSync(db) 0
-# define sqlite3VtabLock(X)
-# define sqlite3VtabUnlock(X)
-# define sqlite3VtabUnlockList(X)
-# define sqlite3VtabSavepoint(X, Y, Z) SQLITE_OK
-# define sqlite3GetVTable(X,Y) ((VTable*)0)
-#else
-SQLITE_PRIVATE void sqlite3VtabClear(sqlite3 *db, Table*);
-SQLITE_PRIVATE void sqlite3VtabDisconnect(sqlite3 *db, Table *p);
-SQLITE_PRIVATE int sqlite3VtabSync(sqlite3 *db, Vdbe*);
-SQLITE_PRIVATE int sqlite3VtabRollback(sqlite3 *db);
-SQLITE_PRIVATE int sqlite3VtabCommit(sqlite3 *db);
-SQLITE_PRIVATE void sqlite3VtabLock(VTable *);
-SQLITE_PRIVATE void sqlite3VtabUnlock(VTable *);
-SQLITE_PRIVATE void sqlite3VtabUnlockList(sqlite3*);
-SQLITE_PRIVATE int sqlite3VtabSavepoint(sqlite3 *, int, int);
-SQLITE_PRIVATE void sqlite3VtabImportErrmsg(Vdbe*, sqlite3_vtab*);
-SQLITE_PRIVATE VTable *sqlite3GetVTable(sqlite3*, Table*);
-# define sqlite3VtabInSync(db) ((db)->nVTrans>0 && (db)->aVTrans==0)
-#endif
-SQLITE_PRIVATE int sqlite3VtabEponymousTableInit(Parse*,Module*);
-SQLITE_PRIVATE void sqlite3VtabEponymousTableClear(sqlite3*,Module*);
-SQLITE_PRIVATE void sqlite3VtabMakeWritable(Parse*,Table*);
-SQLITE_PRIVATE void sqlite3VtabBeginParse(Parse*, Token*, Token*, Token*, int);
-SQLITE_PRIVATE void sqlite3VtabFinishParse(Parse*, Token*);
-SQLITE_PRIVATE void sqlite3VtabArgInit(Parse*);
-SQLITE_PRIVATE void sqlite3VtabArgExtend(Parse*, Token*);
-SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3*, int, const char *, char **);
-SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse*, Table*);
-SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3*, int, const char *);
-SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *, VTable *);
-SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*);
-SQLITE_PRIVATE void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**);
-SQLITE_PRIVATE sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*);
-SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe*, const char*, int);
-SQLITE_PRIVATE int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *);
-SQLITE_PRIVATE void sqlite3ParserReset(Parse*);
-SQLITE_PRIVATE int sqlite3Reprepare(Vdbe*);
-SQLITE_PRIVATE void sqlite3ExprListCheckLength(Parse*, ExprList*, const char*);
-SQLITE_PRIVATE CollSeq *sqlite3BinaryCompareCollSeq(Parse *, Expr *, Expr *);
-SQLITE_PRIVATE int sqlite3TempInMemory(const sqlite3*);
-SQLITE_PRIVATE const char *sqlite3JournalModename(int);
-#ifndef SQLITE_OMIT_WAL
-SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3*, int, int, int*, int*);
-SQLITE_PRIVATE int sqlite3WalDefaultHook(void*,sqlite3*,const char*,int);
-#endif
-#ifndef SQLITE_OMIT_CTE
-SQLITE_PRIVATE With *sqlite3WithAdd(Parse*,With*,Token*,ExprList*,Select*);
-SQLITE_PRIVATE void sqlite3WithDelete(sqlite3*,With*);
-SQLITE_PRIVATE void sqlite3WithPush(Parse*, With*, u8);
-#else
-#define sqlite3WithPush(x,y,z)
-#define sqlite3WithDelete(x,y)
-#endif
-
-/* Declarations for functions in fkey.c. All of these are replaced by
-** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign
-** key functionality is available. If OMIT_TRIGGER is defined but
-** OMIT_FOREIGN_KEY is not, only some of the functions are no-oped. In
-** this case foreign keys are parsed, but no other functionality is
-** provided (enforcement of FK constraints requires the triggers sub-system).
-*/
-#if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER)
-SQLITE_PRIVATE void sqlite3FkCheck(Parse*, Table*, int, int, int*, int);
-SQLITE_PRIVATE void sqlite3FkDropTable(Parse*, SrcList *, Table*);
-SQLITE_PRIVATE void sqlite3FkActions(Parse*, Table*, ExprList*, int, int*, int);
-SQLITE_PRIVATE int sqlite3FkRequired(Parse*, Table*, int*, int);
-SQLITE_PRIVATE u32 sqlite3FkOldmask(Parse*, Table*);
-SQLITE_PRIVATE FKey *sqlite3FkReferences(Table *);
-#else
- #define sqlite3FkActions(a,b,c,d,e,f)
- #define sqlite3FkCheck(a,b,c,d,e,f)
- #define sqlite3FkDropTable(a,b,c)
- #define sqlite3FkOldmask(a,b) 0
- #define sqlite3FkRequired(a,b,c,d) 0
-#endif
-#ifndef SQLITE_OMIT_FOREIGN_KEY
-SQLITE_PRIVATE void sqlite3FkDelete(sqlite3 *, Table*);
-SQLITE_PRIVATE int sqlite3FkLocateIndex(Parse*,Table*,FKey*,Index**,int**);
-#else
- #define sqlite3FkDelete(a,b)
- #define sqlite3FkLocateIndex(a,b,c,d,e)
-#endif
-
-
-/*
-** Available fault injectors. Should be numbered beginning with 0.
-*/
-#define SQLITE_FAULTINJECTOR_MALLOC 0
-#define SQLITE_FAULTINJECTOR_COUNT 1
-
-/*
-** The interface to the code in fault.c used for identifying "benign"
-** malloc failures. This is only present if SQLITE_OMIT_BUILTIN_TEST
-** is not defined.
-*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-SQLITE_PRIVATE void sqlite3BeginBenignMalloc(void);
-SQLITE_PRIVATE void sqlite3EndBenignMalloc(void);
-#else
- #define sqlite3BeginBenignMalloc()
- #define sqlite3EndBenignMalloc()
-#endif
-
-/*
-** Allowed return values from sqlite3FindInIndex()
-*/
-#define IN_INDEX_ROWID 1 /* Search the rowid of the table */
-#define IN_INDEX_EPH 2 /* Search an ephemeral b-tree */
-#define IN_INDEX_INDEX_ASC 3 /* Existing index ASCENDING */
-#define IN_INDEX_INDEX_DESC 4 /* Existing index DESCENDING */
-#define IN_INDEX_NOOP 5 /* No table available. Use comparisons */
-/*
-** Allowed flags for the 3rd parameter to sqlite3FindInIndex().
-*/
-#define IN_INDEX_NOOP_OK 0x0001 /* OK to return IN_INDEX_NOOP */
-#define IN_INDEX_MEMBERSHIP 0x0002 /* IN operator used for membership test */
-#define IN_INDEX_LOOP 0x0004 /* IN operator used as a loop */
-SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*);
-
-SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int);
-SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *);
-#ifdef SQLITE_ENABLE_ATOMIC_WRITE
-SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *);
-#endif
-
-SQLITE_PRIVATE int sqlite3JournalIsInMemory(sqlite3_file *p);
-SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *);
-
-SQLITE_PRIVATE void sqlite3ExprSetHeightAndFlags(Parse *pParse, Expr *p);
-#if SQLITE_MAX_EXPR_DEPTH>0
-SQLITE_PRIVATE int sqlite3SelectExprHeight(Select *);
-SQLITE_PRIVATE int sqlite3ExprCheckHeight(Parse*, int);
-#else
- #define sqlite3SelectExprHeight(x) 0
- #define sqlite3ExprCheckHeight(x,y)
-#endif
-
-SQLITE_PRIVATE u32 sqlite3Get4byte(const u8*);
-SQLITE_PRIVATE void sqlite3Put4byte(u8*, u32);
-
-#ifdef SQLITE_ENABLE_UNLOCK_NOTIFY
-SQLITE_PRIVATE void sqlite3ConnectionBlocked(sqlite3 *, sqlite3 *);
-SQLITE_PRIVATE void sqlite3ConnectionUnlocked(sqlite3 *db);
-SQLITE_PRIVATE void sqlite3ConnectionClosed(sqlite3 *db);
-#else
- #define sqlite3ConnectionBlocked(x,y)
- #define sqlite3ConnectionUnlocked(x)
- #define sqlite3ConnectionClosed(x)
-#endif
-
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE void sqlite3ParserTrace(FILE*, char *);
-#endif
-
-/*
-** If the SQLITE_ENABLE IOTRACE exists then the global variable
-** sqlite3IoTrace is a pointer to a printf-like routine used to
-** print I/O tracing messages.
-*/
-#ifdef SQLITE_ENABLE_IOTRACE
-# define IOTRACE(A) if( sqlite3IoTrace ){ sqlite3IoTrace A; }
-SQLITE_PRIVATE void sqlite3VdbeIOTraceSql(Vdbe*);
-SQLITE_API SQLITE_EXTERN void (SQLITE_CDECL *sqlite3IoTrace)(const char*,...);
-#else
-# define IOTRACE(A)
-# define sqlite3VdbeIOTraceSql(X)
-#endif
-
-/*
-** These routines are available for the mem2.c debugging memory allocator
-** only. They are used to verify that different "types" of memory
-** allocations are properly tracked by the system.
-**
-** sqlite3MemdebugSetType() sets the "type" of an allocation to one of
-** the MEMTYPE_* macros defined below. The type must be a bitmask with
-** a single bit set.
-**
-** sqlite3MemdebugHasType() returns true if any of the bits in its second
-** argument match the type set by the previous sqlite3MemdebugSetType().
-** sqlite3MemdebugHasType() is intended for use inside assert() statements.
-**
-** sqlite3MemdebugNoType() returns true if none of the bits in its second
-** argument match the type set by the previous sqlite3MemdebugSetType().
-**
-** Perhaps the most important point is the difference between MEMTYPE_HEAP
-** and MEMTYPE_LOOKASIDE. If an allocation is MEMTYPE_LOOKASIDE, that means
-** it might have been allocated by lookaside, except the allocation was
-** too large or lookaside was already full. It is important to verify
-** that allocations that might have been satisfied by lookaside are not
-** passed back to non-lookaside free() routines. Asserts such as the
-** example above are placed on the non-lookaside free() routines to verify
-** this constraint.
-**
-** All of this is no-op for a production build. It only comes into
-** play when the SQLITE_MEMDEBUG compile-time option is used.
-*/
-#ifdef SQLITE_MEMDEBUG
-SQLITE_PRIVATE void sqlite3MemdebugSetType(void*,u8);
-SQLITE_PRIVATE int sqlite3MemdebugHasType(void*,u8);
-SQLITE_PRIVATE int sqlite3MemdebugNoType(void*,u8);
-#else
-# define sqlite3MemdebugSetType(X,Y) /* no-op */
-# define sqlite3MemdebugHasType(X,Y) 1
-# define sqlite3MemdebugNoType(X,Y) 1
-#endif
-#define MEMTYPE_HEAP 0x01 /* General heap allocations */
-#define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */
-#define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */
-#define MEMTYPE_PCACHE 0x08 /* Page cache allocations */
-
-/*
-** Threading interface
-*/
-#if SQLITE_MAX_WORKER_THREADS>0
-SQLITE_PRIVATE int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*);
-SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread*, void**);
-#endif
-
-#if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST)
-SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*);
-#endif
-
-#endif /* _SQLITEINT_H_ */
-
-/************** End of sqliteInt.h *******************************************/
-/************** Begin file global.c ******************************************/
-/*
-** 2008 June 13
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains definitions of global variables and constants.
-*/
-/* #include "sqliteInt.h" */
-
-/* An array to map all upper-case characters into their corresponding
-** lower-case character.
-**
-** SQLite only considers US-ASCII (or EBCDIC) characters. We do not
-** handle case conversions for the UTF character set since the tables
-** involved are nearly as big or bigger than SQLite itself.
-*/
-SQLITE_PRIVATE const unsigned char sqlite3UpperToLower[] = {
-#ifdef SQLITE_ASCII
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17,
- 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35,
- 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53,
- 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 97, 98, 99,100,101,102,103,
- 104,105,106,107,108,109,110,111,112,113,114,115,116,117,118,119,120,121,
- 122, 91, 92, 93, 94, 95, 96, 97, 98, 99,100,101,102,103,104,105,106,107,
- 108,109,110,111,112,113,114,115,116,117,118,119,120,121,122,123,124,125,
- 126,127,128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143,
- 144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159,160,161,
- 162,163,164,165,166,167,168,169,170,171,172,173,174,175,176,177,178,179,
- 180,181,182,183,184,185,186,187,188,189,190,191,192,193,194,195,196,197,
- 198,199,200,201,202,203,204,205,206,207,208,209,210,211,212,213,214,215,
- 216,217,218,219,220,221,222,223,224,225,226,227,228,229,230,231,232,233,
- 234,235,236,237,238,239,240,241,242,243,244,245,246,247,248,249,250,251,
- 252,253,254,255
-#endif
-#ifdef SQLITE_EBCDIC
- 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, /* 0x */
- 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, /* 1x */
- 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, /* 2x */
- 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, /* 3x */
- 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, /* 4x */
- 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, /* 5x */
- 96, 97, 98, 99,100,101,102,103,104,105,106,107,108,109,110,111, /* 6x */
- 112,113,114,115,116,117,118,119,120,121,122,123,124,125,126,127, /* 7x */
- 128,129,130,131,132,133,134,135,136,137,138,139,140,141,142,143, /* 8x */
- 144,145,146,147,148,149,150,151,152,153,154,155,156,157,158,159, /* 9x */
- 160,161,162,163,164,165,166,167,168,169,170,171,140,141,142,175, /* Ax */
- 176,177,178,179,180,181,182,183,184,185,186,187,188,189,190,191, /* Bx */
- 192,129,130,131,132,133,134,135,136,137,202,203,204,205,206,207, /* Cx */
- 208,145,146,147,148,149,150,151,152,153,218,219,220,221,222,223, /* Dx */
- 224,225,162,163,164,165,166,167,168,169,234,235,236,237,238,239, /* Ex */
- 240,241,242,243,244,245,246,247,248,249,250,251,252,253,254,255, /* Fx */
-#endif
-};
-
-/*
-** The following 256 byte lookup table is used to support SQLites built-in
-** equivalents to the following standard library functions:
-**
-** isspace() 0x01
-** isalpha() 0x02
-** isdigit() 0x04
-** isalnum() 0x06
-** isxdigit() 0x08
-** toupper() 0x20
-** SQLite identifier character 0x40
-** Quote character 0x80
-**
-** Bit 0x20 is set if the mapped character requires translation to upper
-** case. i.e. if the character is a lower-case ASCII character.
-** If x is a lower-case ASCII character, then its upper-case equivalent
-** is (x - 0x20). Therefore toupper() can be implemented as:
-**
-** (x & ~(map[x]&0x20))
-**
-** Standard function tolower() is implemented using the sqlite3UpperToLower[]
-** array. tolower() is used more often than toupper() by SQLite.
-**
-** Bit 0x40 is set if the character non-alphanumeric and can be used in an
-** SQLite identifier. Identifiers are alphanumerics, "_", "$", and any
-** non-ASCII UTF character. Hence the test for whether or not a character is
-** part of an identifier is 0x46.
-**
-** SQLite's versions are identical to the standard versions assuming a
-** locale of "C". They are implemented as macros in sqliteInt.h.
-*/
-#ifdef SQLITE_ASCII
-SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[256] = {
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 00..07 ........ */
- 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, /* 08..0f ........ */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 10..17 ........ */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 18..1f ........ */
- 0x01, 0x00, 0x80, 0x00, 0x40, 0x00, 0x00, 0x80, /* 20..27 !"#$%&' */
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 28..2f ()*+,-./ */
- 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, 0x0c, /* 30..37 01234567 */
- 0x0c, 0x0c, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, /* 38..3f 89:;<=>? */
-
- 0x00, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x0a, 0x02, /* 40..47 @ABCDEFG */
- 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 48..4f HIJKLMNO */
- 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02, /* 50..57 PQRSTUVW */
- 0x02, 0x02, 0x02, 0x80, 0x00, 0x00, 0x00, 0x40, /* 58..5f XYZ[\]^_ */
- 0x80, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x2a, 0x22, /* 60..67 `abcdefg */
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 68..6f hijklmno */
- 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, 0x22, /* 70..77 pqrstuvw */
- 0x22, 0x22, 0x22, 0x00, 0x00, 0x00, 0x00, 0x00, /* 78..7f xyz{|}~. */
-
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* 80..87 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* 88..8f ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* 90..97 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* 98..9f ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* a0..a7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* a8..af ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* b0..b7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* b8..bf ........ */
-
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* c0..c7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* c8..cf ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* d0..d7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* d8..df ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* e0..e7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* e8..ef ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, /* f0..f7 ........ */
- 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40, 0x40 /* f8..ff ........ */
-};
-#endif
-
-/* EVIDENCE-OF: R-02982-34736 In order to maintain full backwards
-** compatibility for legacy applications, the URI filename capability is
-** disabled by default.
-**
-** EVIDENCE-OF: R-38799-08373 URI filenames can be enabled or disabled
-** using the SQLITE_USE_URI=1 or SQLITE_USE_URI=0 compile-time options.
-**
-** EVIDENCE-OF: R-43642-56306 By default, URI handling is globally
-** disabled. The default value may be changed by compiling with the
-** SQLITE_USE_URI symbol defined.
-*/
-#ifndef SQLITE_USE_URI
-# define SQLITE_USE_URI 0
-#endif
-
-/* EVIDENCE-OF: R-38720-18127 The default setting is determined by the
-** SQLITE_ALLOW_COVERING_INDEX_SCAN compile-time option, or is "on" if
-** that compile-time option is omitted.
-*/
-#ifndef SQLITE_ALLOW_COVERING_INDEX_SCAN
-# define SQLITE_ALLOW_COVERING_INDEX_SCAN 1
-#endif
-
-/* The minimum PMA size is set to this value multiplied by the database
-** page size in bytes.
-*/
-#ifndef SQLITE_SORTER_PMASZ
-# define SQLITE_SORTER_PMASZ 250
-#endif
-
-/* Statement journals spill to disk when their size exceeds the following
-** threashold (in bytes). 0 means that statement journals are created and
-** written to disk immediately (the default behavior for SQLite versions
-** before 3.12.0). -1 means always keep the entire statement journal in
-** memory. (The statement journal is also always held entirely in memory
-** if journal_mode=MEMORY or if temp_store=MEMORY, regardless of this
-** setting.)
-*/
-#ifndef SQLITE_STMTJRNL_SPILL
-# define SQLITE_STMTJRNL_SPILL (64*1024)
-#endif
-
-/*
-** The following singleton contains the global configuration for
-** the SQLite library.
-*/
-SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config = {
- SQLITE_DEFAULT_MEMSTATUS, /* bMemstat */
- 1, /* bCoreMutex */
- SQLITE_THREADSAFE==1, /* bFullMutex */
- SQLITE_USE_URI, /* bOpenUri */
- SQLITE_ALLOW_COVERING_INDEX_SCAN, /* bUseCis */
- 0x7ffffffe, /* mxStrlen */
- 0, /* neverCorrupt */
- 128, /* szLookaside */
- 500, /* nLookaside */
- SQLITE_STMTJRNL_SPILL, /* nStmtSpill */
- {0,0,0,0,0,0,0,0}, /* m */
- {0,0,0,0,0,0,0,0,0}, /* mutex */
- {0,0,0,0,0,0,0,0,0,0,0,0,0},/* pcache2 */
- (void*)0, /* pHeap */
- 0, /* nHeap */
- 0, 0, /* mnHeap, mxHeap */
- SQLITE_DEFAULT_MMAP_SIZE, /* szMmap */
- SQLITE_MAX_MMAP_SIZE, /* mxMmap */
- (void*)0, /* pScratch */
- 0, /* szScratch */
- 0, /* nScratch */
- (void*)0, /* pPage */
- 0, /* szPage */
- SQLITE_DEFAULT_PCACHE_INITSZ, /* nPage */
- 0, /* mxParserStack */
- 0, /* sharedCacheEnabled */
- SQLITE_SORTER_PMASZ, /* szPma */
- /* All the rest should always be initialized to zero */
- 0, /* isInit */
- 0, /* inProgress */
- 0, /* isMutexInit */
- 0, /* isMallocInit */
- 0, /* isPCacheInit */
- 0, /* nRefInitMutex */
- 0, /* pInitMutex */
- 0, /* xLog */
- 0, /* pLogArg */
-#ifdef SQLITE_ENABLE_SQLLOG
- 0, /* xSqllog */
- 0, /* pSqllogArg */
-#endif
-#ifdef SQLITE_VDBE_COVERAGE
- 0, /* xVdbeBranch */
- 0, /* pVbeBranchArg */
-#endif
-#ifndef SQLITE_OMIT_BUILTIN_TEST
- 0, /* xTestCallback */
-#endif
- 0 /* bLocaltimeFault */
-};
-
-/*
-** Hash table for global functions - functions common to all
-** database connections. After initialization, this table is
-** read-only.
-*/
-SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions;
-
-/*
-** Constant tokens for values 0 and 1.
-*/
-SQLITE_PRIVATE const Token sqlite3IntTokens[] = {
- { "0", 1 },
- { "1", 1 }
-};
-
-
-/*
-** The value of the "pending" byte must be 0x40000000 (1 byte past the
-** 1-gibabyte boundary) in a compatible database. SQLite never uses
-** the database page that contains the pending byte. It never attempts
-** to read or write that page. The pending byte page is set assign
-** for use by the VFS layers as space for managing file locks.
-**
-** During testing, it is often desirable to move the pending byte to
-** a different position in the file. This allows code that has to
-** deal with the pending byte to run on files that are much smaller
-** than 1 GiB. The sqlite3_test_control() interface can be used to
-** move the pending byte.
-**
-** IMPORTANT: Changing the pending byte to any value other than
-** 0x40000000 results in an incompatible database file format!
-** Changing the pending byte during operation will result in undefined
-** and incorrect behavior.
-*/
-#ifndef SQLITE_OMIT_WSD
-SQLITE_PRIVATE int sqlite3PendingByte = 0x40000000;
-#endif
-
-/* #include "opcodes.h" */
-/*
-** Properties of opcodes. The OPFLG_INITIALIZER macro is
-** created by mkopcodeh.awk during compilation. Data is obtained
-** from the comments following the "case OP_xxxx:" statements in
-** the vdbe.c file.
-*/
-SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[] = OPFLG_INITIALIZER;
-
-/*
-** Name of the default collating sequence
-*/
-SQLITE_PRIVATE const char sqlite3StrBINARY[] = "BINARY";
-
-/************** End of global.c **********************************************/
-/************** Begin file ctime.c *******************************************/
-/*
-** 2010 February 23
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file implements routines used to report what compile-time options
-** SQLite was built with.
-*/
-
-#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS
-
-/* #include "sqliteInt.h" */
-
-/*
-** An array of names of all compile-time options. This array should
-** be sorted A-Z.
-**
-** This array looks large, but in a typical installation actually uses
-** only a handful of compile-time options, so most times this array is usually
-** rather short and uses little memory space.
-*/
-static const char * const azCompileOpt[] = {
-
-/* These macros are provided to "stringify" the value of the define
-** for those options in which the value is meaningful. */
-#define CTIMEOPT_VAL_(opt) #opt
-#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt)
-
-#if SQLITE_32BIT_ROWID
- "32BIT_ROWID",
-#endif
-#if SQLITE_4_BYTE_ALIGNED_MALLOC
- "4_BYTE_ALIGNED_MALLOC",
-#endif
-#if SQLITE_CASE_SENSITIVE_LIKE
- "CASE_SENSITIVE_LIKE",
-#endif
-#if SQLITE_CHECK_PAGES
- "CHECK_PAGES",
-#endif
-#if SQLITE_COVERAGE_TEST
- "COVERAGE_TEST",
-#endif
-#if SQLITE_DEBUG
- "DEBUG",
-#endif
-#if SQLITE_DEFAULT_LOCKING_MODE
- "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE),
-#endif
-#if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc)
- "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE),
-#endif
-#if SQLITE_DISABLE_DIRSYNC
- "DISABLE_DIRSYNC",
-#endif
-#if SQLITE_DISABLE_LFS
- "DISABLE_LFS",
-#endif
-#if SQLITE_ENABLE_8_3_NAMES
- "ENABLE_8_3_NAMES",
-#endif
-#if SQLITE_ENABLE_API_ARMOR
- "ENABLE_API_ARMOR",
-#endif
-#if SQLITE_ENABLE_ATOMIC_WRITE
- "ENABLE_ATOMIC_WRITE",
-#endif
-#if SQLITE_ENABLE_CEROD
- "ENABLE_CEROD",
-#endif
-#if SQLITE_ENABLE_COLUMN_METADATA
- "ENABLE_COLUMN_METADATA",
-#endif
-#if SQLITE_ENABLE_DBSTAT_VTAB
- "ENABLE_DBSTAT_VTAB",
-#endif
-#if SQLITE_ENABLE_EXPENSIVE_ASSERT
- "ENABLE_EXPENSIVE_ASSERT",
-#endif
-#if SQLITE_ENABLE_FTS1
- "ENABLE_FTS1",
-#endif
-#if SQLITE_ENABLE_FTS2
- "ENABLE_FTS2",
-#endif
-#if SQLITE_ENABLE_FTS3
- "ENABLE_FTS3",
-#endif
-#if SQLITE_ENABLE_FTS3_PARENTHESIS
- "ENABLE_FTS3_PARENTHESIS",
-#endif
-#if SQLITE_ENABLE_FTS4
- "ENABLE_FTS4",
-#endif
-#if SQLITE_ENABLE_FTS5
- "ENABLE_FTS5",
-#endif
-#if SQLITE_ENABLE_ICU
- "ENABLE_ICU",
-#endif
-#if SQLITE_ENABLE_IOTRACE
- "ENABLE_IOTRACE",
-#endif
-#if SQLITE_ENABLE_JSON1
- "ENABLE_JSON1",
-#endif
-#if SQLITE_ENABLE_LOAD_EXTENSION
- "ENABLE_LOAD_EXTENSION",
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE
- "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE),
-#endif
-#if SQLITE_ENABLE_MEMORY_MANAGEMENT
- "ENABLE_MEMORY_MANAGEMENT",
-#endif
-#if SQLITE_ENABLE_MEMSYS3
- "ENABLE_MEMSYS3",
-#endif
-#if SQLITE_ENABLE_MEMSYS5
- "ENABLE_MEMSYS5",
-#endif
-#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK
- "ENABLE_OVERSIZE_CELL_CHECK",
-#endif
-#if SQLITE_ENABLE_RTREE
- "ENABLE_RTREE",
-#endif
-#if defined(SQLITE_ENABLE_STAT4)
- "ENABLE_STAT4",
-#elif defined(SQLITE_ENABLE_STAT3)
- "ENABLE_STAT3",
-#endif
-#if SQLITE_ENABLE_UNLOCK_NOTIFY
- "ENABLE_UNLOCK_NOTIFY",
-#endif
-#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT
- "ENABLE_UPDATE_DELETE_LIMIT",
-#endif
-#if SQLITE_HAS_CODEC
- "HAS_CODEC",
-#endif
-#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
- "HAVE_ISNAN",
-#endif
-#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- "HOMEGROWN_RECURSIVE_MUTEX",
-#endif
-#if SQLITE_IGNORE_AFP_LOCK_ERRORS
- "IGNORE_AFP_LOCK_ERRORS",
-#endif
-#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- "IGNORE_FLOCK_LOCK_ERRORS",
-#endif
-#ifdef SQLITE_INT64_TYPE
- "INT64_TYPE",
-#endif
-#ifdef SQLITE_LIKE_DOESNT_MATCH_BLOBS
- "LIKE_DOESNT_MATCH_BLOBS",
-#endif
-#if SQLITE_LOCK_TRACE
- "LOCK_TRACE",
-#endif
-#if defined(SQLITE_MAX_MMAP_SIZE) && !defined(SQLITE_MAX_MMAP_SIZE_xc)
- "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE),
-#endif
-#ifdef SQLITE_MAX_SCHEMA_RETRY
- "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY),
-#endif
-#if SQLITE_MEMDEBUG
- "MEMDEBUG",
-#endif
-#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT
- "MIXED_ENDIAN_64BIT_FLOAT",
-#endif
-#if SQLITE_NO_SYNC
- "NO_SYNC",
-#endif
-#if SQLITE_OMIT_ALTERTABLE
- "OMIT_ALTERTABLE",
-#endif
-#if SQLITE_OMIT_ANALYZE
- "OMIT_ANALYZE",
-#endif
-#if SQLITE_OMIT_ATTACH
- "OMIT_ATTACH",
-#endif
-#if SQLITE_OMIT_AUTHORIZATION
- "OMIT_AUTHORIZATION",
-#endif
-#if SQLITE_OMIT_AUTOINCREMENT
- "OMIT_AUTOINCREMENT",
-#endif
-#if SQLITE_OMIT_AUTOINIT
- "OMIT_AUTOINIT",
-#endif
-#if SQLITE_OMIT_AUTOMATIC_INDEX
- "OMIT_AUTOMATIC_INDEX",
-#endif
-#if SQLITE_OMIT_AUTORESET
- "OMIT_AUTORESET",
-#endif
-#if SQLITE_OMIT_AUTOVACUUM
- "OMIT_AUTOVACUUM",
-#endif
-#if SQLITE_OMIT_BETWEEN_OPTIMIZATION
- "OMIT_BETWEEN_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_BLOB_LITERAL
- "OMIT_BLOB_LITERAL",
-#endif
-#if SQLITE_OMIT_BTREECOUNT
- "OMIT_BTREECOUNT",
-#endif
-#if SQLITE_OMIT_BUILTIN_TEST
- "OMIT_BUILTIN_TEST",
-#endif
-#if SQLITE_OMIT_CAST
- "OMIT_CAST",
-#endif
-#if SQLITE_OMIT_CHECK
- "OMIT_CHECK",
-#endif
-#if SQLITE_OMIT_COMPLETE
- "OMIT_COMPLETE",
-#endif
-#if SQLITE_OMIT_COMPOUND_SELECT
- "OMIT_COMPOUND_SELECT",
-#endif
-#if SQLITE_OMIT_CTE
- "OMIT_CTE",
-#endif
-#if SQLITE_OMIT_DATETIME_FUNCS
- "OMIT_DATETIME_FUNCS",
-#endif
-#if SQLITE_OMIT_DECLTYPE
- "OMIT_DECLTYPE",
-#endif
-#if SQLITE_OMIT_DEPRECATED
- "OMIT_DEPRECATED",
-#endif
-#if SQLITE_OMIT_DISKIO
- "OMIT_DISKIO",
-#endif
-#if SQLITE_OMIT_EXPLAIN
- "OMIT_EXPLAIN",
-#endif
-#if SQLITE_OMIT_FLAG_PRAGMAS
- "OMIT_FLAG_PRAGMAS",
-#endif
-#if SQLITE_OMIT_FLOATING_POINT
- "OMIT_FLOATING_POINT",
-#endif
-#if SQLITE_OMIT_FOREIGN_KEY
- "OMIT_FOREIGN_KEY",
-#endif
-#if SQLITE_OMIT_GET_TABLE
- "OMIT_GET_TABLE",
-#endif
-#if SQLITE_OMIT_INCRBLOB
- "OMIT_INCRBLOB",
-#endif
-#if SQLITE_OMIT_INTEGRITY_CHECK
- "OMIT_INTEGRITY_CHECK",
-#endif
-#if SQLITE_OMIT_LIKE_OPTIMIZATION
- "OMIT_LIKE_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_LOAD_EXTENSION
- "OMIT_LOAD_EXTENSION",
-#endif
-#if SQLITE_OMIT_LOCALTIME
- "OMIT_LOCALTIME",
-#endif
-#if SQLITE_OMIT_LOOKASIDE
- "OMIT_LOOKASIDE",
-#endif
-#if SQLITE_OMIT_MEMORYDB
- "OMIT_MEMORYDB",
-#endif
-#if SQLITE_OMIT_OR_OPTIMIZATION
- "OMIT_OR_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_PAGER_PRAGMAS
- "OMIT_PAGER_PRAGMAS",
-#endif
-#if SQLITE_OMIT_PRAGMA
- "OMIT_PRAGMA",
-#endif
-#if SQLITE_OMIT_PROGRESS_CALLBACK
- "OMIT_PROGRESS_CALLBACK",
-#endif
-#if SQLITE_OMIT_QUICKBALANCE
- "OMIT_QUICKBALANCE",
-#endif
-#if SQLITE_OMIT_REINDEX
- "OMIT_REINDEX",
-#endif
-#if SQLITE_OMIT_SCHEMA_PRAGMAS
- "OMIT_SCHEMA_PRAGMAS",
-#endif
-#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS
- "OMIT_SCHEMA_VERSION_PRAGMAS",
-#endif
-#if SQLITE_OMIT_SHARED_CACHE
- "OMIT_SHARED_CACHE",
-#endif
-#if SQLITE_OMIT_SUBQUERY
- "OMIT_SUBQUERY",
-#endif
-#if SQLITE_OMIT_TCL_VARIABLE
- "OMIT_TCL_VARIABLE",
-#endif
-#if SQLITE_OMIT_TEMPDB
- "OMIT_TEMPDB",
-#endif
-#if SQLITE_OMIT_TRACE
- "OMIT_TRACE",
-#endif
-#if SQLITE_OMIT_TRIGGER
- "OMIT_TRIGGER",
-#endif
-#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION
- "OMIT_TRUNCATE_OPTIMIZATION",
-#endif
-#if SQLITE_OMIT_UTF16
- "OMIT_UTF16",
-#endif
-#if SQLITE_OMIT_VACUUM
- "OMIT_VACUUM",
-#endif
-#if SQLITE_OMIT_VIEW
- "OMIT_VIEW",
-#endif
-#if SQLITE_OMIT_VIRTUALTABLE
- "OMIT_VIRTUALTABLE",
-#endif
-#if SQLITE_OMIT_WAL
- "OMIT_WAL",
-#endif
-#if SQLITE_OMIT_WSD
- "OMIT_WSD",
-#endif
-#if SQLITE_OMIT_XFER_OPT
- "OMIT_XFER_OPT",
-#endif
-#if SQLITE_PERFORMANCE_TRACE
- "PERFORMANCE_TRACE",
-#endif
-#if SQLITE_PROXY_DEBUG
- "PROXY_DEBUG",
-#endif
-#if SQLITE_RTREE_INT_ONLY
- "RTREE_INT_ONLY",
-#endif
-#if SQLITE_SECURE_DELETE
- "SECURE_DELETE",
-#endif
-#if SQLITE_SMALL_STACK
- "SMALL_STACK",
-#endif
-#if SQLITE_SOUNDEX
- "SOUNDEX",
-#endif
-#if SQLITE_SYSTEM_MALLOC
- "SYSTEM_MALLOC",
-#endif
-#if SQLITE_TCL
- "TCL",
-#endif
-#if defined(SQLITE_TEMP_STORE) && !defined(SQLITE_TEMP_STORE_xc)
- "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE),
-#endif
-#if SQLITE_TEST
- "TEST",
-#endif
-#if defined(SQLITE_THREADSAFE)
- "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE),
-#endif
-#if SQLITE_USE_ALLOCA
- "USE_ALLOCA",
-#endif
-#if SQLITE_USER_AUTHENTICATION
- "USER_AUTHENTICATION",
-#endif
-#if SQLITE_WIN32_MALLOC
- "WIN32_MALLOC",
-#endif
-#if SQLITE_ZERO_MALLOC
- "ZERO_MALLOC"
-#endif
-};
-
-/*
-** Given the name of a compile-time option, return true if that option
-** was used and false if not.
-**
-** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix
-** is not required for a match.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_compileoption_used(const char *zOptName){
- int i, n;
-
-#if SQLITE_ENABLE_API_ARMOR
- if( zOptName==0 ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
- if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7;
- n = sqlite3Strlen30(zOptName);
-
- /* Since ArraySize(azCompileOpt) is normally in single digits, a
- ** linear search is adequate. No need for a binary search. */
- for(i=0; i=0 && NaDb[] (or -1) */
- u8 nullRow; /* True if pointing to a row with no data */
- u8 deferredMoveto; /* A call to sqlite3BtreeMoveto() is needed */
- u8 isTable; /* True for rowid tables. False for indexes */
-#ifdef SQLITE_DEBUG
- u8 seekOp; /* Most recent seek operation on this cursor */
- u8 wrFlag; /* The wrFlag argument to sqlite3BtreeCursor() */
-#endif
- Bool isEphemeral:1; /* True for an ephemeral table */
- Bool useRandomRowid:1;/* Generate new record numbers semi-randomly */
- Bool isOrdered:1; /* True if the table is not BTREE_UNORDERED */
- Pgno pgnoRoot; /* Root page of the open btree cursor */
- i16 nField; /* Number of fields in the header */
- u16 nHdrParsed; /* Number of header fields parsed so far */
- union {
- BtCursor *pCursor; /* CURTYPE_BTREE. Btree cursor */
- sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */
- int pseudoTableReg; /* CURTYPE_PSEUDO. Reg holding content. */
- VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */
- } uc;
- Btree *pBt; /* Separate file holding temporary table */
- KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */
- int seekResult; /* Result of previous sqlite3BtreeMoveto() */
- i64 seqCount; /* Sequence counter */
- i64 movetoTarget; /* Argument to the deferred sqlite3BtreeMoveto() */
- VdbeCursor *pAltCursor; /* Associated index cursor from which to read */
- int *aAltMap; /* Mapping from table to index column numbers */
-#ifdef SQLITE_ENABLE_COLUMN_USED_MASK
- u64 maskUsed; /* Mask of columns used by this cursor */
-#endif
-
- /* Cached information about the header for the data record that the
- ** cursor is currently pointing to. Only valid if cacheStatus matches
- ** Vdbe.cacheCtr. Vdbe.cacheCtr will never take on the value of
- ** CACHE_STALE and so setting cacheStatus=CACHE_STALE guarantees that
- ** the cache is out of date.
- **
- ** aRow might point to (ephemeral) data for the current row, or it might
- ** be NULL.
- */
- u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */
- u32 payloadSize; /* Total number of bytes in the record */
- u32 szRow; /* Byte available in aRow */
- u32 iHdrOffset; /* Offset to next unparsed byte of the header */
- const u8 *aRow; /* Data for the current row, if all on one page */
- u32 *aOffset; /* Pointer to aType[nField] */
- u32 aType[1]; /* Type values for all entries in the record */
- /* 2*nField extra array elements allocated for aType[], beyond the one
- ** static element declared in the structure. nField total array slots for
- ** aType[] and nField+1 array slots for aOffset[] */
-};
-
-/*
-** When a sub-program is executed (OP_Program), a structure of this type
-** is allocated to store the current value of the program counter, as
-** well as the current memory cell array and various other frame specific
-** values stored in the Vdbe struct. When the sub-program is finished,
-** these values are copied back to the Vdbe from the VdbeFrame structure,
-** restoring the state of the VM to as it was before the sub-program
-** began executing.
-**
-** The memory for a VdbeFrame object is allocated and managed by a memory
-** cell in the parent (calling) frame. When the memory cell is deleted or
-** overwritten, the VdbeFrame object is not freed immediately. Instead, it
-** is linked into the Vdbe.pDelFrame list. The contents of the Vdbe.pDelFrame
-** list is deleted when the VM is reset in VdbeHalt(). The reason for doing
-** this instead of deleting the VdbeFrame immediately is to avoid recursive
-** calls to sqlite3VdbeMemRelease() when the memory cells belonging to the
-** child frame are released.
-**
-** The currently executing frame is stored in Vdbe.pFrame. Vdbe.pFrame is
-** set to NULL if the currently executing frame is the main program.
-*/
-typedef struct VdbeFrame VdbeFrame;
-struct VdbeFrame {
- Vdbe *v; /* VM this frame belongs to */
- VdbeFrame *pParent; /* Parent of this frame, or NULL if parent is main */
- Op *aOp; /* Program instructions for parent frame */
- i64 *anExec; /* Event counters from parent frame */
- Mem *aMem; /* Array of memory cells for parent frame */
- u8 *aOnceFlag; /* Array of OP_Once flags for parent frame */
- VdbeCursor **apCsr; /* Array of Vdbe cursors for parent frame */
- void *token; /* Copy of SubProgram.token */
- i64 lastRowid; /* Last insert rowid (sqlite3.lastRowid) */
- AuxData *pAuxData; /* Linked list of auxdata allocations */
- int nCursor; /* Number of entries in apCsr */
- int pc; /* Program Counter in parent (calling) frame */
- int nOp; /* Size of aOp array */
- int nMem; /* Number of entries in aMem */
- int nOnceFlag; /* Number of entries in aOnceFlag */
- int nChildMem; /* Number of memory cells for child frame */
- int nChildCsr; /* Number of cursors for child frame */
- int nChange; /* Statement changes (Vdbe.nChange) */
- int nDbChange; /* Value of db->nChange */
-};
-
-#define VdbeFrameMem(p) ((Mem *)&((u8 *)p)[ROUND8(sizeof(VdbeFrame))])
-
-/*
-** A value for VdbeCursor.cacheValid that means the cache is always invalid.
-*/
-#define CACHE_STALE 0
-
-/*
-** Internally, the vdbe manipulates nearly all SQL values as Mem
-** structures. Each Mem struct may cache multiple representations (string,
-** integer etc.) of the same value.
-*/
-struct Mem {
- union MemValue {
- double r; /* Real value used when MEM_Real is set in flags */
- i64 i; /* Integer value used when MEM_Int is set in flags */
- int nZero; /* Used when bit MEM_Zero is set in flags */
- FuncDef *pDef; /* Used only when flags==MEM_Agg */
- RowSet *pRowSet; /* Used only when flags==MEM_RowSet */
- VdbeFrame *pFrame; /* Used when flags==MEM_Frame */
- } u;
- u16 flags; /* Some combination of MEM_Null, MEM_Str, MEM_Dyn, etc. */
- u8 enc; /* SQLITE_UTF8, SQLITE_UTF16BE, SQLITE_UTF16LE */
- u8 eSubtype; /* Subtype for this value */
- int n; /* Number of characters in string value, excluding '\0' */
- char *z; /* String or BLOB value */
- /* ShallowCopy only needs to copy the information above */
- char *zMalloc; /* Space to hold MEM_Str or MEM_Blob if szMalloc>0 */
- int szMalloc; /* Size of the zMalloc allocation */
- u32 uTemp; /* Transient storage for serial_type in OP_MakeRecord */
- sqlite3 *db; /* The associated database connection */
- void (*xDel)(void*);/* Destructor for Mem.z - only valid if MEM_Dyn */
-#ifdef SQLITE_DEBUG
- Mem *pScopyFrom; /* This Mem is a shallow copy of pScopyFrom */
- void *pFiller; /* So that sizeof(Mem) is a multiple of 8 */
-#endif
-};
-
-/*
-** Size of struct Mem not including the Mem.zMalloc member or anything that
-** follows.
-*/
-#define MEMCELLSIZE offsetof(Mem,zMalloc)
-
-/* One or more of the following flags are set to indicate the validOK
-** representations of the value stored in the Mem struct.
-**
-** If the MEM_Null flag is set, then the value is an SQL NULL value.
-** No other flags may be set in this case.
-**
-** If the MEM_Str flag is set then Mem.z points at a string representation.
-** Usually this is encoded in the same unicode encoding as the main
-** database (see below for exceptions). If the MEM_Term flag is also
-** set, then the string is nul terminated. The MEM_Int and MEM_Real
-** flags may coexist with the MEM_Str flag.
-*/
-#define MEM_Null 0x0001 /* Value is NULL */
-#define MEM_Str 0x0002 /* Value is a string */
-#define MEM_Int 0x0004 /* Value is an integer */
-#define MEM_Real 0x0008 /* Value is a real number */
-#define MEM_Blob 0x0010 /* Value is a BLOB */
-#define MEM_AffMask 0x001f /* Mask of affinity bits */
-#define MEM_RowSet 0x0020 /* Value is a RowSet object */
-#define MEM_Frame 0x0040 /* Value is a VdbeFrame object */
-#define MEM_Undefined 0x0080 /* Value is undefined */
-#define MEM_Cleared 0x0100 /* NULL set by OP_Null, not from data */
-#define MEM_TypeMask 0x81ff /* Mask of type bits */
-
-
-/* Whenever Mem contains a valid string or blob representation, one of
-** the following flags must be set to determine the memory management
-** policy for Mem.z. The MEM_Term flag tells us whether or not the
-** string is \000 or \u0000 terminated
-*/
-#define MEM_Term 0x0200 /* String rep is nul terminated */
-#define MEM_Dyn 0x0400 /* Need to call Mem.xDel() on Mem.z */
-#define MEM_Static 0x0800 /* Mem.z points to a static string */
-#define MEM_Ephem 0x1000 /* Mem.z points to an ephemeral string */
-#define MEM_Agg 0x2000 /* Mem.z points to an agg function context */
-#define MEM_Zero 0x4000 /* Mem.i contains count of 0s appended to blob */
-#define MEM_Subtype 0x8000 /* Mem.eSubtype is valid */
-#ifdef SQLITE_OMIT_INCRBLOB
- #undef MEM_Zero
- #define MEM_Zero 0x0000
-#endif
-
-/* Return TRUE if Mem X contains dynamically allocated content - anything
-** that needs to be deallocated to avoid a leak.
-*/
-#define VdbeMemDynamic(X) \
- (((X)->flags&(MEM_Agg|MEM_Dyn|MEM_RowSet|MEM_Frame))!=0)
-
-/*
-** Clear any existing type flags from a Mem and replace them with f
-*/
-#define MemSetTypeFlag(p, f) \
- ((p)->flags = ((p)->flags&~(MEM_TypeMask|MEM_Zero))|f)
-
-/*
-** Return true if a memory cell is not marked as invalid. This macro
-** is for use inside assert() statements only.
-*/
-#ifdef SQLITE_DEBUG
-#define memIsValid(M) ((M)->flags & MEM_Undefined)==0
-#endif
-
-/*
-** Each auxiliary data pointer stored by a user defined function
-** implementation calling sqlite3_set_auxdata() is stored in an instance
-** of this structure. All such structures associated with a single VM
-** are stored in a linked list headed at Vdbe.pAuxData. All are destroyed
-** when the VM is halted (if not before).
-*/
-struct AuxData {
- int iOp; /* Instruction number of OP_Function opcode */
- int iArg; /* Index of function argument. */
- void *pAux; /* Aux data pointer */
- void (*xDelete)(void *); /* Destructor for the aux data */
- AuxData *pNext; /* Next element in list */
-};
-
-/*
-** The "context" argument for an installable function. A pointer to an
-** instance of this structure is the first argument to the routines used
-** implement the SQL functions.
-**
-** There is a typedef for this structure in sqlite.h. So all routines,
-** even the public interface to SQLite, can use a pointer to this structure.
-** But this file is the only place where the internal details of this
-** structure are known.
-**
-** This structure is defined inside of vdbeInt.h because it uses substructures
-** (Mem) which are only defined there.
-*/
-struct sqlite3_context {
- Mem *pOut; /* The return value is stored here */
- FuncDef *pFunc; /* Pointer to function information */
- Mem *pMem; /* Memory cell used to store aggregate context */
- Vdbe *pVdbe; /* The VM that owns this context */
- int iOp; /* Instruction number of OP_Function */
- int isError; /* Error code returned by the function. */
- u8 skipFlag; /* Skip accumulator loading if true */
- u8 fErrorOrAux; /* isError!=0 or pVdbe->pAuxData modified */
- u8 argc; /* Number of arguments */
- sqlite3_value *argv[1]; /* Argument set */
-};
-
-/*
-** An Explain object accumulates indented output which is helpful
-** in describing recursive data structures.
-*/
-struct Explain {
- Vdbe *pVdbe; /* Attach the explanation to this Vdbe */
- StrAccum str; /* The string being accumulated */
- int nIndent; /* Number of elements in aIndent */
- u16 aIndent[100]; /* Levels of indentation */
- char zBase[100]; /* Initial space */
-};
-
-/* A bitfield type for use inside of structures. Always follow with :N where
-** N is the number of bits.
-*/
-typedef unsigned bft; /* Bit Field Type */
-
-typedef struct ScanStatus ScanStatus;
-struct ScanStatus {
- int addrExplain; /* OP_Explain for loop */
- int addrLoop; /* Address of "loops" counter */
- int addrVisit; /* Address of "rows visited" counter */
- int iSelectID; /* The "Select-ID" for this loop */
- LogEst nEst; /* Estimated output rows per loop */
- char *zName; /* Name of table or index */
-};
-
-/*
-** An instance of the virtual machine. This structure contains the complete
-** state of the virtual machine.
-**
-** The "sqlite3_stmt" structure pointer that is returned by sqlite3_prepare()
-** is really a pointer to an instance of this structure.
-*/
-struct Vdbe {
- sqlite3 *db; /* The database connection that owns this statement */
- Op *aOp; /* Space to hold the virtual machine's program */
- Mem *aMem; /* The memory locations */
- Mem **apArg; /* Arguments to currently executing user function */
- Mem *aColName; /* Column names to return */
- Mem *pResultSet; /* Pointer to an array of results */
- Parse *pParse; /* Parsing context used to create this Vdbe */
- int nMem; /* Number of memory locations currently allocated */
- int nOp; /* Number of instructions in the program */
- int nCursor; /* Number of slots in apCsr[] */
- u32 magic; /* Magic number for sanity checking */
- char *zErrMsg; /* Error message written here */
- Vdbe *pPrev,*pNext; /* Linked list of VDBEs with the same Vdbe.db */
- VdbeCursor **apCsr; /* One element of this array for each open cursor */
- Mem *aVar; /* Values for the OP_Variable opcode. */
- char **azVar; /* Name of variables */
- ynVar nVar; /* Number of entries in aVar[] */
- ynVar nzVar; /* Number of entries in azVar[] */
- u32 cacheCtr; /* VdbeCursor row cache generation counter */
- int pc; /* The program counter */
- int rc; /* Value to return */
-#ifdef SQLITE_DEBUG
- int rcApp; /* errcode set by sqlite3_result_error_code() */
-#endif
- u16 nResColumn; /* Number of columns in one row of the result set */
- u8 errorAction; /* Recovery action to do in case of an error */
- bft expired:1; /* True if the VM needs to be recompiled */
- bft doingRerun:1; /* True if rerunning after an auto-reprepare */
- u8 minWriteFileFormat; /* Minimum file format for writable database files */
- bft explain:2; /* True if EXPLAIN present on SQL command */
- bft changeCntOn:1; /* True to update the change-counter */
- bft runOnlyOnce:1; /* Automatically expire on reset */
- bft usesStmtJournal:1; /* True if uses a statement journal */
- bft readOnly:1; /* True for statements that do not write */
- bft bIsReader:1; /* True for statements that read */
- bft isPrepareV2:1; /* True if prepared with prepare_v2() */
- int nChange; /* Number of db changes made since last reset */
- yDbMask btreeMask; /* Bitmask of db->aDb[] entries referenced */
- yDbMask lockMask; /* Subset of btreeMask that requires a lock */
- int iStatement; /* Statement number (or 0 if has not opened stmt) */
- u32 aCounter[5]; /* Counters used by sqlite3_stmt_status() */
-#ifndef SQLITE_OMIT_TRACE
- i64 startTime; /* Time when query started - used for profiling */
-#endif
- i64 iCurrentTime; /* Value of julianday('now') for this statement */
- i64 nFkConstraint; /* Number of imm. FK constraints this VM */
- i64 nStmtDefCons; /* Number of def. constraints when stmt started */
- i64 nStmtDefImmCons; /* Number of def. imm constraints when stmt started */
- char *zSql; /* Text of the SQL statement that generated this */
- void *pFree; /* Free this when deleting the vdbe */
- VdbeFrame *pFrame; /* Parent frame */
- VdbeFrame *pDelFrame; /* List of frame objects to free on VM reset */
- int nFrame; /* Number of frames in pFrame list */
- u32 expmask; /* Binding to these vars invalidates VM */
- SubProgram *pProgram; /* Linked list of all sub-programs used by VM */
- int nOnceFlag; /* Size of array aOnceFlag[] */
- u8 *aOnceFlag; /* Flags for OP_Once */
- AuxData *pAuxData; /* Linked list of auxdata allocations */
-#ifdef SQLITE_ENABLE_STMT_SCANSTATUS
- i64 *anExec; /* Number of times each op has been executed */
- int nScan; /* Entries in aScan[] */
- ScanStatus *aScan; /* Scan definitions for sqlite3_stmt_scanstatus() */
-#endif
-};
-
-/*
-** The following are allowed values for Vdbe.magic
-*/
-#define VDBE_MAGIC_INIT 0x26bceaa5 /* Building a VDBE program */
-#define VDBE_MAGIC_RUN 0xbdf20da3 /* VDBE is ready to execute */
-#define VDBE_MAGIC_HALT 0x519c2973 /* VDBE has completed execution */
-#define VDBE_MAGIC_DEAD 0xb606c3c8 /* The VDBE has been deallocated */
-
-/*
-** Structure used to store the context required by the
-** sqlite3_preupdate_*() API functions.
-*/
-struct PreUpdate {
- Vdbe *v;
- VdbeCursor *pCsr; /* Cursor to read old values from */
- int op; /* One of SQLITE_INSERT, UPDATE, DELETE */
- u8 *aRecord; /* old.* database record */
- KeyInfo keyinfo;
- UnpackedRecord *pUnpacked; /* Unpacked version of aRecord[] */
- UnpackedRecord *pNewUnpacked; /* Unpacked version of new.* record */
- int iNewReg; /* Register for new.* values */
- i64 iKey1; /* First key value passed to hook */
- i64 iKey2; /* Second key value passed to hook */
- int iPKey; /* If not negative index of IPK column */
- Mem *aNew; /* Array of new.* values */
-};
-
-/*
-** Function prototypes
-*/
-SQLITE_PRIVATE void sqlite3VdbeError(Vdbe*, const char *, ...);
-SQLITE_PRIVATE void sqlite3VdbeFreeCursor(Vdbe *, VdbeCursor*);
-void sqliteVdbePopStack(Vdbe*,int);
-SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor**, int*);
-SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor*);
-#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE)
-SQLITE_PRIVATE void sqlite3VdbePrintOp(FILE*, int, Op*);
-#endif
-SQLITE_PRIVATE u32 sqlite3VdbeSerialTypeLen(u32);
-SQLITE_PRIVATE u8 sqlite3VdbeOneByteSerialTypeLen(u8);
-SQLITE_PRIVATE u32 sqlite3VdbeSerialType(Mem*, int, u32*);
-SQLITE_PRIVATE u32 sqlite3VdbeSerialPut(unsigned char*, Mem*, u32);
-SQLITE_PRIVATE u32 sqlite3VdbeSerialGet(const unsigned char*, u32, Mem*);
-SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3*, AuxData**, int, int);
-
-int sqlite2BtreeKeyCompare(BtCursor *, const void *, int, int, int *);
-SQLITE_PRIVATE int sqlite3VdbeIdxKeyCompare(sqlite3*,VdbeCursor*,UnpackedRecord*,int*);
-SQLITE_PRIVATE int sqlite3VdbeIdxRowid(sqlite3*, BtCursor*, i64*);
-SQLITE_PRIVATE int sqlite3VdbeExec(Vdbe*);
-SQLITE_PRIVATE int sqlite3VdbeList(Vdbe*);
-SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe*);
-SQLITE_PRIVATE int sqlite3VdbeChangeEncoding(Mem *, int);
-SQLITE_PRIVATE int sqlite3VdbeMemTooBig(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemCopy(Mem*, const Mem*);
-SQLITE_PRIVATE void sqlite3VdbeMemShallowCopy(Mem*, const Mem*, int);
-SQLITE_PRIVATE void sqlite3VdbeMemMove(Mem*, Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemSetStr(Mem*, const char*, int, u8, void(*)(void*));
-SQLITE_PRIVATE void sqlite3VdbeMemSetInt64(Mem*, i64);
-#ifdef SQLITE_OMIT_FLOATING_POINT
-# define sqlite3VdbeMemSetDouble sqlite3VdbeMemSetInt64
-#else
-SQLITE_PRIVATE void sqlite3VdbeMemSetDouble(Mem*, double);
-#endif
-SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem*,sqlite3*,u16);
-SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem*);
-SQLITE_PRIVATE void sqlite3VdbeMemSetZeroBlob(Mem*,int);
-SQLITE_PRIVATE void sqlite3VdbeMemSetRowSet(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem*, u8, u8);
-SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem*);
-SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem*);
-SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*);
-SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*);
-SQLITE_PRIVATE void sqlite3VdbeMemCast(Mem*,u8,u8);
-SQLITE_PRIVATE int sqlite3VdbeMemFromBtree(BtCursor*,u32,u32,int,Mem*);
-SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p);
-SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem*, FuncDef*);
-SQLITE_PRIVATE const char *sqlite3OpcodeName(int);
-SQLITE_PRIVATE int sqlite3VdbeMemGrow(Mem *pMem, int n, int preserve);
-SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int n);
-SQLITE_PRIVATE int sqlite3VdbeCloseStatement(Vdbe *, int);
-SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame*);
-SQLITE_PRIVATE int sqlite3VdbeFrameRestore(VdbeFrame *);
-#ifdef SQLITE_ENABLE_PREUPDATE_HOOK
-SQLITE_PRIVATE void sqlite3VdbePreUpdateHook(Vdbe*,VdbeCursor*,int,const char*,Table*,i64,int);
-#endif
-SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p);
-
-SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, int, VdbeCursor *);
-SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *, VdbeSorter *);
-SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *, VdbeCursor *);
-SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *, Mem *);
-SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *, int *);
-SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *, int *);
-SQLITE_PRIVATE int sqlite3VdbeSorterWrite(const VdbeCursor *, Mem *);
-SQLITE_PRIVATE int sqlite3VdbeSorterCompare(const VdbeCursor *, Mem *, int, int *);
-
-#if !defined(SQLITE_OMIT_SHARED_CACHE)
-SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe*);
-#else
-# define sqlite3VdbeEnter(X)
-#endif
-
-#if !defined(SQLITE_OMIT_SHARED_CACHE) && SQLITE_THREADSAFE>0
-SQLITE_PRIVATE void sqlite3VdbeLeave(Vdbe*);
-#else
-# define sqlite3VdbeLeave(X)
-#endif
-
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE void sqlite3VdbeMemAboutToChange(Vdbe*,Mem*);
-SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem*);
-#endif
-
-#ifndef SQLITE_OMIT_FOREIGN_KEY
-SQLITE_PRIVATE int sqlite3VdbeCheckFk(Vdbe *, int);
-#else
-# define sqlite3VdbeCheckFk(p,i) 0
-#endif
-
-SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem*, u8);
-#ifdef SQLITE_DEBUG
-SQLITE_PRIVATE void sqlite3VdbePrintSql(Vdbe*);
-SQLITE_PRIVATE void sqlite3VdbeMemPrettyPrint(Mem *pMem, char *zBuf);
-#endif
-SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem);
-
-#ifndef SQLITE_OMIT_INCRBLOB
-SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *);
- #define ExpandBlob(P) (((P)->flags&MEM_Zero)?sqlite3VdbeMemExpandBlob(P):0)
-#else
- #define sqlite3VdbeMemExpandBlob(x) SQLITE_OK
- #define ExpandBlob(P) SQLITE_OK
-#endif
-
-#endif /* !defined(_VDBEINT_H_) */
-
-/************** End of vdbeInt.h *********************************************/
-/************** Continuing where we left off in status.c *********************/
-
-/*
-** Variables in which to record status information.
-*/
-#if SQLITE_PTRSIZE>4
-typedef sqlite3_int64 sqlite3StatValueType;
-#else
-typedef u32 sqlite3StatValueType;
-#endif
-typedef struct sqlite3StatType sqlite3StatType;
-static SQLITE_WSD struct sqlite3StatType {
- sqlite3StatValueType nowValue[10]; /* Current value */
- sqlite3StatValueType mxValue[10]; /* Maximum value */
-} sqlite3Stat = { {0,}, {0,} };
-
-/*
-** Elements of sqlite3Stat[] are protected by either the memory allocator
-** mutex, or by the pcache1 mutex. The following array determines which.
-*/
-static const char statMutex[] = {
- 0, /* SQLITE_STATUS_MEMORY_USED */
- 1, /* SQLITE_STATUS_PAGECACHE_USED */
- 1, /* SQLITE_STATUS_PAGECACHE_OVERFLOW */
- 0, /* SQLITE_STATUS_SCRATCH_USED */
- 0, /* SQLITE_STATUS_SCRATCH_OVERFLOW */
- 0, /* SQLITE_STATUS_MALLOC_SIZE */
- 0, /* SQLITE_STATUS_PARSER_STACK */
- 1, /* SQLITE_STATUS_PAGECACHE_SIZE */
- 0, /* SQLITE_STATUS_SCRATCH_SIZE */
- 0, /* SQLITE_STATUS_MALLOC_COUNT */
-};
-
-
-/* The "wsdStat" macro will resolve to the status information
-** state vector. If writable static data is unsupported on the target,
-** we have to locate the state vector at run-time. In the more common
-** case where writable static data is supported, wsdStat can refer directly
-** to the "sqlite3Stat" state vector declared above.
-*/
-#ifdef SQLITE_OMIT_WSD
-# define wsdStatInit sqlite3StatType *x = &GLOBAL(sqlite3StatType,sqlite3Stat)
-# define wsdStat x[0]
-#else
-# define wsdStatInit
-# define wsdStat sqlite3Stat
-#endif
-
-/*
-** Return the current value of a status parameter. The caller must
-** be holding the appropriate mutex.
-*/
-SQLITE_PRIVATE sqlite3_int64 sqlite3StatusValue(int op){
- wsdStatInit;
- assert( op>=0 && op=0 && op=0 && op=0 && opwsdStat.mxValue[op] ){
- wsdStat.mxValue[op] = wsdStat.nowValue[op];
- }
-}
-SQLITE_PRIVATE void sqlite3StatusDown(int op, int N){
- wsdStatInit;
- assert( N>=0 );
- assert( op>=0 && op=0 && op=0 );
- newValue = (sqlite3StatValueType)X;
- assert( op>=0 && op=0 && opwsdStat.mxValue[op] ){
- wsdStat.mxValue[op] = newValue;
- }
-}
-
-/*
-** Query status information.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_status64(
- int op,
- sqlite3_int64 *pCurrent,
- sqlite3_int64 *pHighwater,
- int resetFlag
-){
- sqlite3_mutex *pMutex;
- wsdStatInit;
- if( op<0 || op>=ArraySize(wsdStat.nowValue) ){
- return SQLITE_MISUSE_BKPT;
- }
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
-#endif
- pMutex = statMutex[op] ? sqlite3Pcache1Mutex() : sqlite3MallocMutex();
- sqlite3_mutex_enter(pMutex);
- *pCurrent = wsdStat.nowValue[op];
- *pHighwater = wsdStat.mxValue[op];
- if( resetFlag ){
- wsdStat.mxValue[op] = wsdStat.nowValue[op];
- }
- sqlite3_mutex_leave(pMutex);
- (void)pMutex; /* Prevent warning when SQLITE_THREADSAFE=0 */
- return SQLITE_OK;
-}
-SQLITE_API int SQLITE_STDCALL sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetFlag){
- sqlite3_int64 iCur, iHwtr;
- int rc;
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( pCurrent==0 || pHighwater==0 ) return SQLITE_MISUSE_BKPT;
-#endif
- rc = sqlite3_status64(op, &iCur, &iHwtr, resetFlag);
- if( rc==0 ){
- *pCurrent = (int)iCur;
- *pHighwater = (int)iHwtr;
- }
- return rc;
-}
-
-/*
-** Query status information for a single database connection
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_db_status(
- sqlite3 *db, /* The database connection whose status is desired */
- int op, /* Status verb */
- int *pCurrent, /* Write current value here */
- int *pHighwater, /* Write high-water mark here */
- int resetFlag /* Reset high-water mark if true */
-){
- int rc = SQLITE_OK; /* Return code */
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( !sqlite3SafetyCheckOk(db) || pCurrent==0|| pHighwater==0 ){
- return SQLITE_MISUSE_BKPT;
- }
-#endif
- sqlite3_mutex_enter(db->mutex);
- switch( op ){
- case SQLITE_DBSTATUS_LOOKASIDE_USED: {
- *pCurrent = db->lookaside.nOut;
- *pHighwater = db->lookaside.mxOut;
- if( resetFlag ){
- db->lookaside.mxOut = db->lookaside.nOut;
- }
- break;
- }
-
- case SQLITE_DBSTATUS_LOOKASIDE_HIT:
- case SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE:
- case SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL: {
- testcase( op==SQLITE_DBSTATUS_LOOKASIDE_HIT );
- testcase( op==SQLITE_DBSTATUS_LOOKASIDE_MISS_SIZE );
- testcase( op==SQLITE_DBSTATUS_LOOKASIDE_MISS_FULL );
- assert( (op-SQLITE_DBSTATUS_LOOKASIDE_HIT)>=0 );
- assert( (op-SQLITE_DBSTATUS_LOOKASIDE_HIT)<3 );
- *pCurrent = 0;
- *pHighwater = db->lookaside.anStat[op - SQLITE_DBSTATUS_LOOKASIDE_HIT];
- if( resetFlag ){
- db->lookaside.anStat[op - SQLITE_DBSTATUS_LOOKASIDE_HIT] = 0;
- }
- break;
- }
-
- /*
- ** Return an approximation for the amount of memory currently used
- ** by all pagers associated with the given database connection. The
- ** highwater mark is meaningless and is returned as zero.
- */
- case SQLITE_DBSTATUS_CACHE_USED: {
- int totalUsed = 0;
- int i;
- sqlite3BtreeEnterAll(db);
- for(i=0; inDb; i++){
- Btree *pBt = db->aDb[i].pBt;
- if( pBt ){
- Pager *pPager = sqlite3BtreePager(pBt);
- totalUsed += sqlite3PagerMemUsed(pPager);
- }
- }
- sqlite3BtreeLeaveAll(db);
- *pCurrent = totalUsed;
- *pHighwater = 0;
- break;
- }
-
- /*
- ** *pCurrent gets an accurate estimate of the amount of memory used
- ** to store the schema for all databases (main, temp, and any ATTACHed
- ** databases. *pHighwater is set to zero.
- */
- case SQLITE_DBSTATUS_SCHEMA_USED: {
- int i; /* Used to iterate through schemas */
- int nByte = 0; /* Used to accumulate return value */
-
- sqlite3BtreeEnterAll(db);
- db->pnBytesFreed = &nByte;
- for(i=0; inDb; i++){
- Schema *pSchema = db->aDb[i].pSchema;
- if( ALWAYS(pSchema!=0) ){
- HashElem *p;
-
- nByte += sqlite3GlobalConfig.m.xRoundup(sizeof(HashElem)) * (
- pSchema->tblHash.count
- + pSchema->trigHash.count
- + pSchema->idxHash.count
- + pSchema->fkeyHash.count
- );
- nByte += sqlite3_msize(pSchema->tblHash.ht);
- nByte += sqlite3_msize(pSchema->trigHash.ht);
- nByte += sqlite3_msize(pSchema->idxHash.ht);
- nByte += sqlite3_msize(pSchema->fkeyHash.ht);
-
- for(p=sqliteHashFirst(&pSchema->trigHash); p; p=sqliteHashNext(p)){
- sqlite3DeleteTrigger(db, (Trigger*)sqliteHashData(p));
- }
- for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){
- sqlite3DeleteTable(db, (Table *)sqliteHashData(p));
- }
- }
- }
- db->pnBytesFreed = 0;
- sqlite3BtreeLeaveAll(db);
-
- *pHighwater = 0;
- *pCurrent = nByte;
- break;
- }
-
- /*
- ** *pCurrent gets an accurate estimate of the amount of memory used
- ** to store all prepared statements.
- ** *pHighwater is set to zero.
- */
- case SQLITE_DBSTATUS_STMT_USED: {
- struct Vdbe *pVdbe; /* Used to iterate through VMs */
- int nByte = 0; /* Used to accumulate return value */
-
- db->pnBytesFreed = &nByte;
- for(pVdbe=db->pVdbe; pVdbe; pVdbe=pVdbe->pNext){
- sqlite3VdbeClearObject(db, pVdbe);
- sqlite3DbFree(db, pVdbe);
- }
- db->pnBytesFreed = 0;
-
- *pHighwater = 0; /* IMP: R-64479-57858 */
- *pCurrent = nByte;
-
- break;
- }
-
- /*
- ** Set *pCurrent to the total cache hits or misses encountered by all
- ** pagers the database handle is connected to. *pHighwater is always set
- ** to zero.
- */
- case SQLITE_DBSTATUS_CACHE_HIT:
- case SQLITE_DBSTATUS_CACHE_MISS:
- case SQLITE_DBSTATUS_CACHE_WRITE:{
- int i;
- int nRet = 0;
- assert( SQLITE_DBSTATUS_CACHE_MISS==SQLITE_DBSTATUS_CACHE_HIT+1 );
- assert( SQLITE_DBSTATUS_CACHE_WRITE==SQLITE_DBSTATUS_CACHE_HIT+2 );
-
- for(i=0; inDb; i++){
- if( db->aDb[i].pBt ){
- Pager *pPager = sqlite3BtreePager(db->aDb[i].pBt);
- sqlite3PagerCacheStat(pPager, op, resetFlag, &nRet);
- }
- }
- *pHighwater = 0; /* IMP: R-42420-56072 */
- /* IMP: R-54100-20147 */
- /* IMP: R-29431-39229 */
- *pCurrent = nRet;
- break;
- }
-
- /* Set *pCurrent to non-zero if there are unresolved deferred foreign
- ** key constraints. Set *pCurrent to zero if all foreign key constraints
- ** have been satisfied. The *pHighwater is always set to zero.
- */
- case SQLITE_DBSTATUS_DEFERRED_FKS: {
- *pHighwater = 0; /* IMP: R-11967-56545 */
- *pCurrent = db->nDeferredImmCons>0 || db->nDeferredCons>0;
- break;
- }
-
- default: {
- rc = SQLITE_ERROR;
- }
- }
- sqlite3_mutex_leave(db->mutex);
- return rc;
-}
-
-/************** End of status.c **********************************************/
-/************** Begin file date.c ********************************************/
-/*
-** 2003 October 31
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement date and time
-** functions for SQLite.
-**
-** There is only one exported symbol in this file - the function
-** sqlite3RegisterDateTimeFunctions() found at the bottom of the file.
-** All other code has file scope.
-**
-** SQLite processes all times and dates as julian day numbers. The
-** dates and times are stored as the number of days since noon
-** in Greenwich on November 24, 4714 B.C. according to the Gregorian
-** calendar system.
-**
-** 1970-01-01 00:00:00 is JD 2440587.5
-** 2000-01-01 00:00:00 is JD 2451544.5
-**
-** This implementation requires years to be expressed as a 4-digit number
-** which means that only dates between 0000-01-01 and 9999-12-31 can
-** be represented, even though julian day numbers allow a much wider
-** range of dates.
-**
-** The Gregorian calendar system is used for all dates and times,
-** even those that predate the Gregorian calendar. Historians usually
-** use the julian calendar for dates prior to 1582-10-15 and for some
-** dates afterwards, depending on locale. Beware of this difference.
-**
-** The conversion algorithms are implemented based on descriptions
-** in the following text:
-**
-** Jean Meeus
-** Astronomical Algorithms, 2nd Edition, 1998
-** ISBM 0-943396-61-1
-** Willmann-Bell, Inc
-** Richmond, Virginia (USA)
-*/
-/* #include "sqliteInt.h" */
-/* #include */
-/* #include */
-#include
-
-#ifndef SQLITE_OMIT_DATETIME_FUNCS
-
-/*
-** The MSVC CRT on Windows CE may not have a localtime() function.
-** So declare a substitute. The substitute function itself is
-** defined in "os_win.c".
-*/
-#if !defined(SQLITE_OMIT_LOCALTIME) && defined(_WIN32_WCE) && \
- (!defined(SQLITE_MSVC_LOCALTIME_API) || !SQLITE_MSVC_LOCALTIME_API)
-struct tm *__cdecl localtime(const time_t *);
-#endif
-
-/*
-** A structure for holding a single date and time.
-*/
-typedef struct DateTime DateTime;
-struct DateTime {
- sqlite3_int64 iJD; /* The julian day number times 86400000 */
- int Y, M, D; /* Year, month, and day */
- int h, m; /* Hour and minutes */
- int tz; /* Timezone offset in minutes */
- double s; /* Seconds */
- char validYMD; /* True (1) if Y,M,D are valid */
- char validHMS; /* True (1) if h,m,s are valid */
- char validJD; /* True (1) if iJD is valid */
- char validTZ; /* True (1) if tz is valid */
- char tzSet; /* Timezone was set explicitly */
-};
-
-
-/*
-** Convert zDate into one or more integers according to the conversion
-** specifier zFormat.
-**
-** zFormat[] contains 4 characters for each integer converted, except for
-** the last integer which is specified by three characters. The meaning
-** of a four-character format specifiers ABCD is:
-**
-** A: number of digits to convert. Always "2" or "4".
-** B: minimum value. Always "0" or "1".
-** C: maximum value, decoded as:
-** a: 12
-** b: 14
-** c: 24
-** d: 31
-** e: 59
-** f: 9999
-** D: the separator character, or \000 to indicate this is the
-** last number to convert.
-**
-** Example: To translate an ISO-8601 date YYYY-MM-DD, the format would
-** be "40f-21a-20c". The "40f-" indicates the 4-digit year followed by "-".
-** The "21a-" indicates the 2-digit month followed by "-". The "20c" indicates
-** the 2-digit day which is the last integer in the set.
-**
-** The function returns the number of successful conversions.
-*/
-static int getDigits(const char *zDate, const char *zFormat, ...){
- /* The aMx[] array translates the 3rd character of each format
- ** spec into a max size: a b c d e f */
- static const u16 aMx[] = { 12, 14, 24, 31, 59, 9999 };
- va_list ap;
- int cnt = 0;
- char nextC;
- va_start(ap, zFormat);
- do{
- char N = zFormat[0] - '0';
- char min = zFormat[1] - '0';
- int val = 0;
- u16 max;
-
- assert( zFormat[2]>='a' && zFormat[2]<='f' );
- max = aMx[zFormat[2] - 'a'];
- nextC = zFormat[3];
- val = 0;
- while( N-- ){
- if( !sqlite3Isdigit(*zDate) ){
- goto end_getDigits;
- }
- val = val*10 + *zDate - '0';
- zDate++;
- }
- if( val<(int)min || val>(int)max || (nextC!=0 && nextC!=*zDate) ){
- goto end_getDigits;
- }
- *va_arg(ap,int*) = val;
- zDate++;
- cnt++;
- zFormat += 4;
- }while( nextC );
-end_getDigits:
- va_end(ap);
- return cnt;
-}
-
-/*
-** Parse a timezone extension on the end of a date-time.
-** The extension is of the form:
-**
-** (+/-)HH:MM
-**
-** Or the "zulu" notation:
-**
-** Z
-**
-** If the parse is successful, write the number of minutes
-** of change in p->tz and return 0. If a parser error occurs,
-** return non-zero.
-**
-** A missing specifier is not considered an error.
-*/
-static int parseTimezone(const char *zDate, DateTime *p){
- int sgn = 0;
- int nHr, nMn;
- int c;
- while( sqlite3Isspace(*zDate) ){ zDate++; }
- p->tz = 0;
- c = *zDate;
- if( c=='-' ){
- sgn = -1;
- }else if( c=='+' ){
- sgn = +1;
- }else if( c=='Z' || c=='z' ){
- zDate++;
- goto zulu_time;
- }else{
- return c!=0;
- }
- zDate++;
- if( getDigits(zDate, "20b:20e", &nHr, &nMn)!=2 ){
- return 1;
- }
- zDate += 5;
- p->tz = sgn*(nMn + nHr*60);
-zulu_time:
- while( sqlite3Isspace(*zDate) ){ zDate++; }
- p->tzSet = 1;
- return *zDate!=0;
-}
-
-/*
-** Parse times of the form HH:MM or HH:MM:SS or HH:MM:SS.FFFF.
-** The HH, MM, and SS must each be exactly 2 digits. The
-** fractional seconds FFFF can be one or more digits.
-**
-** Return 1 if there is a parsing error and 0 on success.
-*/
-static int parseHhMmSs(const char *zDate, DateTime *p){
- int h, m, s;
- double ms = 0.0;
- if( getDigits(zDate, "20c:20e", &h, &m)!=2 ){
- return 1;
- }
- zDate += 5;
- if( *zDate==':' ){
- zDate++;
- if( getDigits(zDate, "20e", &s)!=1 ){
- return 1;
- }
- zDate += 2;
- if( *zDate=='.' && sqlite3Isdigit(zDate[1]) ){
- double rScale = 1.0;
- zDate++;
- while( sqlite3Isdigit(*zDate) ){
- ms = ms*10.0 + *zDate - '0';
- rScale *= 10.0;
- zDate++;
- }
- ms /= rScale;
- }
- }else{
- s = 0;
- }
- p->validJD = 0;
- p->validHMS = 1;
- p->h = h;
- p->m = m;
- p->s = s + ms;
- if( parseTimezone(zDate, p) ) return 1;
- p->validTZ = (p->tz!=0)?1:0;
- return 0;
-}
-
-/*
-** Convert from YYYY-MM-DD HH:MM:SS to julian day. We always assume
-** that the YYYY-MM-DD is according to the Gregorian calendar.
-**
-** Reference: Meeus page 61
-*/
-static void computeJD(DateTime *p){
- int Y, M, D, A, B, X1, X2;
-
- if( p->validJD ) return;
- if( p->validYMD ){
- Y = p->Y;
- M = p->M;
- D = p->D;
- }else{
- Y = 2000; /* If no YMD specified, assume 2000-Jan-01 */
- M = 1;
- D = 1;
- }
- if( M<=2 ){
- Y--;
- M += 12;
- }
- A = Y/100;
- B = 2 - A + (A/4);
- X1 = 36525*(Y+4716)/100;
- X2 = 306001*(M+1)/10000;
- p->iJD = (sqlite3_int64)((X1 + X2 + D + B - 1524.5 ) * 86400000);
- p->validJD = 1;
- if( p->validHMS ){
- p->iJD += p->h*3600000 + p->m*60000 + (sqlite3_int64)(p->s*1000);
- if( p->validTZ ){
- p->iJD -= p->tz*60000;
- p->validYMD = 0;
- p->validHMS = 0;
- p->validTZ = 0;
- }
- }
-}
-
-/*
-** Parse dates of the form
-**
-** YYYY-MM-DD HH:MM:SS.FFF
-** YYYY-MM-DD HH:MM:SS
-** YYYY-MM-DD HH:MM
-** YYYY-MM-DD
-**
-** Write the result into the DateTime structure and return 0
-** on success and 1 if the input string is not a well-formed
-** date.
-*/
-static int parseYyyyMmDd(const char *zDate, DateTime *p){
- int Y, M, D, neg;
-
- if( zDate[0]=='-' ){
- zDate++;
- neg = 1;
- }else{
- neg = 0;
- }
- if( getDigits(zDate, "40f-21a-21d", &Y, &M, &D)!=3 ){
- return 1;
- }
- zDate += 10;
- while( sqlite3Isspace(*zDate) || 'T'==*(u8*)zDate ){ zDate++; }
- if( parseHhMmSs(zDate, p)==0 ){
- /* We got the time */
- }else if( *zDate==0 ){
- p->validHMS = 0;
- }else{
- return 1;
- }
- p->validJD = 0;
- p->validYMD = 1;
- p->Y = neg ? -Y : Y;
- p->M = M;
- p->D = D;
- if( p->validTZ ){
- computeJD(p);
- }
- return 0;
-}
-
-/*
-** Set the time to the current time reported by the VFS.
-**
-** Return the number of errors.
-*/
-static int setDateTimeToCurrent(sqlite3_context *context, DateTime *p){
- p->iJD = sqlite3StmtCurrentTime(context);
- if( p->iJD>0 ){
- p->validJD = 1;
- return 0;
- }else{
- return 1;
- }
-}
-
-/*
-** Attempt to parse the given string into a julian day number. Return
-** the number of errors.
-**
-** The following are acceptable forms for the input string:
-**
-** YYYY-MM-DD HH:MM:SS.FFF +/-HH:MM
-** DDDD.DD
-** now
-**
-** In the first form, the +/-HH:MM is always optional. The fractional
-** seconds extension (the ".FFF") is optional. The seconds portion
-** (":SS.FFF") is option. The year and date can be omitted as long
-** as there is a time string. The time string can be omitted as long
-** as there is a year and date.
-*/
-static int parseDateOrTime(
- sqlite3_context *context,
- const char *zDate,
- DateTime *p
-){
- double r;
- if( parseYyyyMmDd(zDate,p)==0 ){
- return 0;
- }else if( parseHhMmSs(zDate, p)==0 ){
- return 0;
- }else if( sqlite3StrICmp(zDate,"now")==0){
- return setDateTimeToCurrent(context, p);
- }else if( sqlite3AtoF(zDate, &r, sqlite3Strlen30(zDate), SQLITE_UTF8) ){
- p->iJD = (sqlite3_int64)(r*86400000.0 + 0.5);
- p->validJD = 1;
- return 0;
- }
- return 1;
-}
-
-/*
-** Compute the Year, Month, and Day from the julian day number.
-*/
-static void computeYMD(DateTime *p){
- int Z, A, B, C, D, E, X1;
- if( p->validYMD ) return;
- if( !p->validJD ){
- p->Y = 2000;
- p->M = 1;
- p->D = 1;
- }else{
- Z = (int)((p->iJD + 43200000)/86400000);
- A = (int)((Z - 1867216.25)/36524.25);
- A = Z + 1 + A - (A/4);
- B = A + 1524;
- C = (int)((B - 122.1)/365.25);
- D = (36525*(C&32767))/100;
- E = (int)((B-D)/30.6001);
- X1 = (int)(30.6001*E);
- p->D = B - D - X1;
- p->M = E<14 ? E-1 : E-13;
- p->Y = p->M>2 ? C - 4716 : C - 4715;
- }
- p->validYMD = 1;
-}
-
-/*
-** Compute the Hour, Minute, and Seconds from the julian day number.
-*/
-static void computeHMS(DateTime *p){
- int s;
- if( p->validHMS ) return;
- computeJD(p);
- s = (int)((p->iJD + 43200000) % 86400000);
- p->s = s/1000.0;
- s = (int)p->s;
- p->s -= s;
- p->h = s/3600;
- s -= p->h*3600;
- p->m = s/60;
- p->s += s - p->m*60;
- p->validHMS = 1;
-}
-
-/*
-** Compute both YMD and HMS
-*/
-static void computeYMD_HMS(DateTime *p){
- computeYMD(p);
- computeHMS(p);
-}
-
-/*
-** Clear the YMD and HMS and the TZ
-*/
-static void clearYMD_HMS_TZ(DateTime *p){
- p->validYMD = 0;
- p->validHMS = 0;
- p->validTZ = 0;
-}
-
-#ifndef SQLITE_OMIT_LOCALTIME
-/*
-** On recent Windows platforms, the localtime_s() function is available
-** as part of the "Secure CRT". It is essentially equivalent to
-** localtime_r() available under most POSIX platforms, except that the
-** order of the parameters is reversed.
-**
-** See http://msdn.microsoft.com/en-us/library/a442x3ye(VS.80).aspx.
-**
-** If the user has not indicated to use localtime_r() or localtime_s()
-** already, check for an MSVC build environment that provides
-** localtime_s().
-*/
-#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S \
- && defined(_MSC_VER) && defined(_CRT_INSECURE_DEPRECATE)
-#undef HAVE_LOCALTIME_S
-#define HAVE_LOCALTIME_S 1
-#endif
-
-/*
-** The following routine implements the rough equivalent of localtime_r()
-** using whatever operating-system specific localtime facility that
-** is available. This routine returns 0 on success and
-** non-zero on any kind of error.
-**
-** If the sqlite3GlobalConfig.bLocaltimeFault variable is true then this
-** routine will always fail.
-**
-** EVIDENCE-OF: R-62172-00036 In this implementation, the standard C
-** library function localtime_r() is used to assist in the calculation of
-** local time.
-*/
-static int osLocaltime(time_t *t, struct tm *pTm){
- int rc;
-#if !HAVE_LOCALTIME_R && !HAVE_LOCALTIME_S
- struct tm *pX;
-#if SQLITE_THREADSAFE>0
- sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
-#endif
- sqlite3_mutex_enter(mutex);
- pX = localtime(t);
-#ifndef SQLITE_OMIT_BUILTIN_TEST
- if( sqlite3GlobalConfig.bLocaltimeFault ) pX = 0;
-#endif
- if( pX ) *pTm = *pX;
- sqlite3_mutex_leave(mutex);
- rc = pX==0;
-#else
-#ifndef SQLITE_OMIT_BUILTIN_TEST
- if( sqlite3GlobalConfig.bLocaltimeFault ) return 1;
-#endif
-#if HAVE_LOCALTIME_R
- rc = localtime_r(t, pTm)==0;
-#else
- rc = localtime_s(pTm, t);
-#endif /* HAVE_LOCALTIME_R */
-#endif /* HAVE_LOCALTIME_R || HAVE_LOCALTIME_S */
- return rc;
-}
-#endif /* SQLITE_OMIT_LOCALTIME */
-
-
-#ifndef SQLITE_OMIT_LOCALTIME
-/*
-** Compute the difference (in milliseconds) between localtime and UTC
-** (a.k.a. GMT) for the time value p where p is in UTC. If no error occurs,
-** return this value and set *pRc to SQLITE_OK.
-**
-** Or, if an error does occur, set *pRc to SQLITE_ERROR. The returned value
-** is undefined in this case.
-*/
-static sqlite3_int64 localtimeOffset(
- DateTime *p, /* Date at which to calculate offset */
- sqlite3_context *pCtx, /* Write error here if one occurs */
- int *pRc /* OUT: Error code. SQLITE_OK or ERROR */
-){
- DateTime x, y;
- time_t t;
- struct tm sLocal;
-
- /* Initialize the contents of sLocal to avoid a compiler warning. */
- memset(&sLocal, 0, sizeof(sLocal));
-
- x = *p;
- computeYMD_HMS(&x);
- if( x.Y<1971 || x.Y>=2038 ){
- /* EVIDENCE-OF: R-55269-29598 The localtime_r() C function normally only
- ** works for years between 1970 and 2037. For dates outside this range,
- ** SQLite attempts to map the year into an equivalent year within this
- ** range, do the calculation, then map the year back.
- */
- x.Y = 2000;
- x.M = 1;
- x.D = 1;
- x.h = 0;
- x.m = 0;
- x.s = 0.0;
- } else {
- int s = (int)(x.s + 0.5);
- x.s = s;
- }
- x.tz = 0;
- x.validJD = 0;
- computeJD(&x);
- t = (time_t)(x.iJD/1000 - 21086676*(i64)10000);
- if( osLocaltime(&t, &sLocal) ){
- sqlite3_result_error(pCtx, "local time unavailable", -1);
- *pRc = SQLITE_ERROR;
- return 0;
- }
- y.Y = sLocal.tm_year + 1900;
- y.M = sLocal.tm_mon + 1;
- y.D = sLocal.tm_mday;
- y.h = sLocal.tm_hour;
- y.m = sLocal.tm_min;
- y.s = sLocal.tm_sec;
- y.validYMD = 1;
- y.validHMS = 1;
- y.validJD = 0;
- y.validTZ = 0;
- computeJD(&y);
- *pRc = SQLITE_OK;
- return y.iJD - x.iJD;
-}
-#endif /* SQLITE_OMIT_LOCALTIME */
-
-/*
-** Process a modifier to a date-time stamp. The modifiers are
-** as follows:
-**
-** NNN days
-** NNN hours
-** NNN minutes
-** NNN.NNNN seconds
-** NNN months
-** NNN years
-** start of month
-** start of year
-** start of week
-** start of day
-** weekday N
-** unixepoch
-** localtime
-** utc
-**
-** Return 0 on success and 1 if there is any kind of error. If the error
-** is in a system call (i.e. localtime()), then an error message is written
-** to context pCtx. If the error is an unrecognized modifier, no error is
-** written to pCtx.
-*/
-static int parseModifier(sqlite3_context *pCtx, const char *zMod, DateTime *p){
- int rc = 1;
- int n;
- double r;
- char *z, zBuf[30];
- z = zBuf;
- for(n=0; niJD += localtimeOffset(p, pCtx, &rc);
- clearYMD_HMS_TZ(p);
- }
- break;
- }
-#endif
- case 'u': {
- /*
- ** unixepoch
- **
- ** Treat the current value of p->iJD as the number of
- ** seconds since 1970. Convert to a real julian day number.
- */
- if( strcmp(z, "unixepoch")==0 && p->validJD ){
- p->iJD = (p->iJD + 43200)/86400 + 21086676*(i64)10000000;
- clearYMD_HMS_TZ(p);
- rc = 0;
- }
-#ifndef SQLITE_OMIT_LOCALTIME
- else if( strcmp(z, "utc")==0 ){
- if( p->tzSet==0 ){
- sqlite3_int64 c1;
- computeJD(p);
- c1 = localtimeOffset(p, pCtx, &rc);
- if( rc==SQLITE_OK ){
- p->iJD -= c1;
- clearYMD_HMS_TZ(p);
- p->iJD += c1 - localtimeOffset(p, pCtx, &rc);
- }
- p->tzSet = 1;
- }else{
- rc = SQLITE_OK;
- }
- }
-#endif
- break;
- }
- case 'w': {
- /*
- ** weekday N
- **
- ** Move the date to the same time on the next occurrence of
- ** weekday N where 0==Sunday, 1==Monday, and so forth. If the
- ** date is already on the appropriate weekday, this is a no-op.
- */
- if( strncmp(z, "weekday ", 8)==0
- && sqlite3AtoF(&z[8], &r, sqlite3Strlen30(&z[8]), SQLITE_UTF8)
- && (n=(int)r)==r && n>=0 && r<7 ){
- sqlite3_int64 Z;
- computeYMD_HMS(p);
- p->validTZ = 0;
- p->validJD = 0;
- computeJD(p);
- Z = ((p->iJD + 129600000)/86400000) % 7;
- if( Z>n ) Z -= 7;
- p->iJD += (n - Z)*86400000;
- clearYMD_HMS_TZ(p);
- rc = 0;
- }
- break;
- }
- case 's': {
- /*
- ** start of TTTTT
- **
- ** Move the date backwards to the beginning of the current day,
- ** or month or year.
- */
- if( strncmp(z, "start of ", 9)!=0 ) break;
- z += 9;
- computeYMD(p);
- p->validHMS = 1;
- p->h = p->m = 0;
- p->s = 0.0;
- p->validTZ = 0;
- p->validJD = 0;
- if( strcmp(z,"month")==0 ){
- p->D = 1;
- rc = 0;
- }else if( strcmp(z,"year")==0 ){
- computeYMD(p);
- p->M = 1;
- p->D = 1;
- rc = 0;
- }else if( strcmp(z,"day")==0 ){
- rc = 0;
- }
- break;
- }
- case '+':
- case '-':
- case '0':
- case '1':
- case '2':
- case '3':
- case '4':
- case '5':
- case '6':
- case '7':
- case '8':
- case '9': {
- double rRounder;
- for(n=1; z[n] && z[n]!=':' && !sqlite3Isspace(z[n]); n++){}
- if( !sqlite3AtoF(z, &r, n, SQLITE_UTF8) ){
- rc = 1;
- break;
- }
- if( z[n]==':' ){
- /* A modifier of the form (+|-)HH:MM:SS.FFF adds (or subtracts) the
- ** specified number of hours, minutes, seconds, and fractional seconds
- ** to the time. The ".FFF" may be omitted. The ":SS.FFF" may be
- ** omitted.
- */
- const char *z2 = z;
- DateTime tx;
- sqlite3_int64 day;
- if( !sqlite3Isdigit(*z2) ) z2++;
- memset(&tx, 0, sizeof(tx));
- if( parseHhMmSs(z2, &tx) ) break;
- computeJD(&tx);
- tx.iJD -= 43200000;
- day = tx.iJD/86400000;
- tx.iJD -= day*86400000;
- if( z[0]=='-' ) tx.iJD = -tx.iJD;
- computeJD(p);
- clearYMD_HMS_TZ(p);
- p->iJD += tx.iJD;
- rc = 0;
- break;
- }
- z += n;
- while( sqlite3Isspace(*z) ) z++;
- n = sqlite3Strlen30(z);
- if( n>10 || n<3 ) break;
- if( z[n-1]=='s' ){ z[n-1] = 0; n--; }
- computeJD(p);
- rc = 0;
- rRounder = r<0 ? -0.5 : +0.5;
- if( n==3 && strcmp(z,"day")==0 ){
- p->iJD += (sqlite3_int64)(r*86400000.0 + rRounder);
- }else if( n==4 && strcmp(z,"hour")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/24.0) + rRounder);
- }else if( n==6 && strcmp(z,"minute")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0)) + rRounder);
- }else if( n==6 && strcmp(z,"second")==0 ){
- p->iJD += (sqlite3_int64)(r*(86400000.0/(24.0*60.0*60.0)) + rRounder);
- }else if( n==5 && strcmp(z,"month")==0 ){
- int x, y;
- computeYMD_HMS(p);
- p->M += (int)r;
- x = p->M>0 ? (p->M-1)/12 : (p->M-12)/12;
- p->Y += x;
- p->M -= x*12;
- p->validJD = 0;
- computeJD(p);
- y = (int)r;
- if( y!=r ){
- p->iJD += (sqlite3_int64)((r - y)*30.0*86400000.0 + rRounder);
- }
- }else if( n==4 && strcmp(z,"year")==0 ){
- int y = (int)r;
- computeYMD_HMS(p);
- p->Y += y;
- p->validJD = 0;
- computeJD(p);
- if( y!=r ){
- p->iJD += (sqlite3_int64)((r - y)*365.0*86400000.0 + rRounder);
- }
- }else{
- rc = 1;
- }
- clearYMD_HMS_TZ(p);
- break;
- }
- default: {
- break;
- }
- }
- return rc;
-}
-
-/*
-** Process time function arguments. argv[0] is a date-time stamp.
-** argv[1] and following are modifiers. Parse them all and write
-** the resulting time into the DateTime structure p. Return 0
-** on success and 1 if there are any errors.
-**
-** If there are zero parameters (if even argv[0] is undefined)
-** then assume a default value of "now" for argv[0].
-*/
-static int isDate(
- sqlite3_context *context,
- int argc,
- sqlite3_value **argv,
- DateTime *p
-){
- int i;
- const unsigned char *z;
- int eType;
- memset(p, 0, sizeof(*p));
- if( argc==0 ){
- return setDateTimeToCurrent(context, p);
- }
- if( (eType = sqlite3_value_type(argv[0]))==SQLITE_FLOAT
- || eType==SQLITE_INTEGER ){
- p->iJD = (sqlite3_int64)(sqlite3_value_double(argv[0])*86400000.0 + 0.5);
- p->validJD = 1;
- }else{
- z = sqlite3_value_text(argv[0]);
- if( !z || parseDateOrTime(context, (char*)z, p) ){
- return 1;
- }
- }
- for(i=1; iaLimit[SQLITE_LIMIT_LENGTH]+1 );
- testcase( n==(u64)db->aLimit[SQLITE_LIMIT_LENGTH] );
- if( n(u64)db->aLimit[SQLITE_LIMIT_LENGTH] ){
- sqlite3_result_error_toobig(context);
- return;
- }else{
- z = sqlite3DbMallocRawNN(db, (int)n);
- if( z==0 ){
- sqlite3_result_error_nomem(context);
- return;
- }
- }
- computeJD(&x);
- computeYMD_HMS(&x);
- for(i=j=0; zFmt[i]; i++){
- if( zFmt[i]!='%' ){
- z[j++] = zFmt[i];
- }else{
- i++;
- switch( zFmt[i] ){
- case 'd': sqlite3_snprintf(3, &z[j],"%02d",x.D); j+=2; break;
- case 'f': {
- double s = x.s;
- if( s>59.999 ) s = 59.999;
- sqlite3_snprintf(7, &z[j],"%06.3f", s);
- j += sqlite3Strlen30(&z[j]);
- break;
- }
- case 'H': sqlite3_snprintf(3, &z[j],"%02d",x.h); j+=2; break;
- case 'W': /* Fall thru */
- case 'j': {
- int nDay; /* Number of days since 1st day of year */
- DateTime y = x;
- y.validJD = 0;
- y.M = 1;
- y.D = 1;
- computeJD(&y);
- nDay = (int)((x.iJD-y.iJD+43200000)/86400000);
- if( zFmt[i]=='W' ){
- int wd; /* 0=Monday, 1=Tuesday, ... 6=Sunday */
- wd = (int)(((x.iJD+43200000)/86400000)%7);
- sqlite3_snprintf(3, &z[j],"%02d",(nDay+7-wd)/7);
- j += 2;
- }else{
- sqlite3_snprintf(4, &z[j],"%03d",nDay+1);
- j += 3;
- }
- break;
- }
- case 'J': {
- sqlite3_snprintf(20, &z[j],"%.16g",x.iJD/86400000.0);
- j+=sqlite3Strlen30(&z[j]);
- break;
- }
- case 'm': sqlite3_snprintf(3, &z[j],"%02d",x.M); j+=2; break;
- case 'M': sqlite3_snprintf(3, &z[j],"%02d",x.m); j+=2; break;
- case 's': {
- sqlite3_snprintf(30,&z[j],"%lld",
- (i64)(x.iJD/1000 - 21086676*(i64)10000));
- j += sqlite3Strlen30(&z[j]);
- break;
- }
- case 'S': sqlite3_snprintf(3,&z[j],"%02d",(int)x.s); j+=2; break;
- case 'w': {
- z[j++] = (char)(((x.iJD+129600000)/86400000) % 7) + '0';
- break;
- }
- case 'Y': {
- sqlite3_snprintf(5,&z[j],"%04d",x.Y); j+=sqlite3Strlen30(&z[j]);
- break;
- }
- default: z[j++] = '%'; break;
- }
- }
- }
- z[j] = 0;
- sqlite3_result_text(context, z, -1,
- z==zBuf ? SQLITE_TRANSIENT : SQLITE_DYNAMIC);
-}
-
-/*
-** current_time()
-**
-** This function returns the same value as time('now').
-*/
-static void ctimeFunc(
- sqlite3_context *context,
- int NotUsed,
- sqlite3_value **NotUsed2
-){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
- timeFunc(context, 0, 0);
-}
-
-/*
-** current_date()
-**
-** This function returns the same value as date('now').
-*/
-static void cdateFunc(
- sqlite3_context *context,
- int NotUsed,
- sqlite3_value **NotUsed2
-){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
- dateFunc(context, 0, 0);
-}
-
-/*
-** current_timestamp()
-**
-** This function returns the same value as datetime('now').
-*/
-static void ctimestampFunc(
- sqlite3_context *context,
- int NotUsed,
- sqlite3_value **NotUsed2
-){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
- datetimeFunc(context, 0, 0);
-}
-#endif /* !defined(SQLITE_OMIT_DATETIME_FUNCS) */
-
-#ifdef SQLITE_OMIT_DATETIME_FUNCS
-/*
-** If the library is compiled to omit the full-scale date and time
-** handling (to get a smaller binary), the following minimal version
-** of the functions current_time(), current_date() and current_timestamp()
-** are included instead. This is to support column declarations that
-** include "DEFAULT CURRENT_TIME" etc.
-**
-** This function uses the C-library functions time(), gmtime()
-** and strftime(). The format string to pass to strftime() is supplied
-** as the user-data for the function.
-*/
-static void currentTimeFunc(
- sqlite3_context *context,
- int argc,
- sqlite3_value **argv
-){
- time_t t;
- char *zFormat = (char *)sqlite3_user_data(context);
- sqlite3 *db;
- sqlite3_int64 iT;
- struct tm *pTm;
- struct tm sNow;
- char zBuf[20];
-
- UNUSED_PARAMETER(argc);
- UNUSED_PARAMETER(argv);
-
- iT = sqlite3StmtCurrentTime(context);
- if( iT<=0 ) return;
- t = iT/1000 - 10000*(sqlite3_int64)21086676;
-#if HAVE_GMTIME_R
- pTm = gmtime_r(&t, &sNow);
-#else
- sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
- pTm = gmtime(&t);
- if( pTm ) memcpy(&sNow, pTm, sizeof(sNow));
- sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER));
-#endif
- if( pTm ){
- strftime(zBuf, 20, zFormat, &sNow);
- sqlite3_result_text(context, zBuf, -1, SQLITE_TRANSIENT);
- }
-}
-#endif
-
-/*
-** This function registered all of the above C functions as SQL
-** functions. This should be the only routine in this file with
-** external linkage.
-*/
-SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void){
- static FuncDef aDateTimeFuncs[] = {
-#ifndef SQLITE_OMIT_DATETIME_FUNCS
- DFUNCTION(julianday, -1, 0, 0, juliandayFunc ),
- DFUNCTION(date, -1, 0, 0, dateFunc ),
- DFUNCTION(time, -1, 0, 0, timeFunc ),
- DFUNCTION(datetime, -1, 0, 0, datetimeFunc ),
- DFUNCTION(strftime, -1, 0, 0, strftimeFunc ),
- DFUNCTION(current_time, 0, 0, 0, ctimeFunc ),
- DFUNCTION(current_timestamp, 0, 0, 0, ctimestampFunc),
- DFUNCTION(current_date, 0, 0, 0, cdateFunc ),
-#else
- STR_FUNCTION(current_time, 0, "%H:%M:%S", 0, currentTimeFunc),
- STR_FUNCTION(current_date, 0, "%Y-%m-%d", 0, currentTimeFunc),
- STR_FUNCTION(current_timestamp, 0, "%Y-%m-%d %H:%M:%S", 0, currentTimeFunc),
-#endif
- };
- sqlite3InsertBuiltinFuncs(aDateTimeFuncs, ArraySize(aDateTimeFuncs));
-}
-
-/************** End of date.c ************************************************/
-/************** Begin file os.c **********************************************/
-/*
-** 2005 November 29
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains OS interface code that is common to all
-** architectures.
-*/
-#define _SQLITE_OS_C_ 1
-/* #include "sqliteInt.h" */
-#undef _SQLITE_OS_C_
-
-/*
-** If we compile with the SQLITE_TEST macro set, then the following block
-** of code will give us the ability to simulate a disk I/O error. This
-** is used for testing the I/O recovery logic.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API int sqlite3_io_error_hit = 0; /* Total number of I/O Errors */
-SQLITE_API int sqlite3_io_error_hardhit = 0; /* Number of non-benign errors */
-SQLITE_API int sqlite3_io_error_pending = 0; /* Count down to first I/O error */
-SQLITE_API int sqlite3_io_error_persist = 0; /* True if I/O errors persist */
-SQLITE_API int sqlite3_io_error_benign = 0; /* True if errors are benign */
-SQLITE_API int sqlite3_diskfull_pending = 0;
-SQLITE_API int sqlite3_diskfull = 0;
-#endif /* defined(SQLITE_TEST) */
-
-/*
-** When testing, also keep a count of the number of open files.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API int sqlite3_open_file_count = 0;
-#endif /* defined(SQLITE_TEST) */
-
-/*
-** The default SQLite sqlite3_vfs implementations do not allocate
-** memory (actually, os_unix.c allocates a small amount of memory
-** from within OsOpen()), but some third-party implementations may.
-** So we test the effects of a malloc() failing and the sqlite3OsXXX()
-** function returning SQLITE_IOERR_NOMEM using the DO_OS_MALLOC_TEST macro.
-**
-** The following functions are instrumented for malloc() failure
-** testing:
-**
-** sqlite3OsRead()
-** sqlite3OsWrite()
-** sqlite3OsSync()
-** sqlite3OsFileSize()
-** sqlite3OsLock()
-** sqlite3OsCheckReservedLock()
-** sqlite3OsFileControl()
-** sqlite3OsShmMap()
-** sqlite3OsOpen()
-** sqlite3OsDelete()
-** sqlite3OsAccess()
-** sqlite3OsFullPathname()
-**
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API int sqlite3_memdebug_vfs_oom_test = 1;
- #define DO_OS_MALLOC_TEST(x) \
- if (sqlite3_memdebug_vfs_oom_test && (!x || !sqlite3JournalIsInMemory(x))) { \
- void *pTstAlloc = sqlite3Malloc(10); \
- if (!pTstAlloc) return SQLITE_IOERR_NOMEM_BKPT; \
- sqlite3_free(pTstAlloc); \
- }
-#else
- #define DO_OS_MALLOC_TEST(x)
-#endif
-
-/*
-** The following routines are convenience wrappers around methods
-** of the sqlite3_file object. This is mostly just syntactic sugar. All
-** of this would be completely automatic if SQLite were coded using
-** C++ instead of plain old C.
-*/
-SQLITE_PRIVATE void sqlite3OsClose(sqlite3_file *pId){
- if( pId->pMethods ){
- pId->pMethods->xClose(pId);
- pId->pMethods = 0;
- }
-}
-SQLITE_PRIVATE int sqlite3OsRead(sqlite3_file *id, void *pBuf, int amt, i64 offset){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xRead(id, pBuf, amt, offset);
-}
-SQLITE_PRIVATE int sqlite3OsWrite(sqlite3_file *id, const void *pBuf, int amt, i64 offset){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xWrite(id, pBuf, amt, offset);
-}
-SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file *id, i64 size){
- return id->pMethods->xTruncate(id, size);
-}
-SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file *id, int flags){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xSync(id, flags);
-}
-SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file *id, i64 *pSize){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xFileSize(id, pSize);
-}
-SQLITE_PRIVATE int sqlite3OsLock(sqlite3_file *id, int lockType){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xLock(id, lockType);
-}
-SQLITE_PRIVATE int sqlite3OsUnlock(sqlite3_file *id, int lockType){
- return id->pMethods->xUnlock(id, lockType);
-}
-SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xCheckReservedLock(id, pResOut);
-}
-
-/*
-** Use sqlite3OsFileControl() when we are doing something that might fail
-** and we need to know about the failures. Use sqlite3OsFileControlHint()
-** when simply tossing information over the wall to the VFS and we do not
-** really care if the VFS receives and understands the information since it
-** is only a hint and can be safely ignored. The sqlite3OsFileControlHint()
-** routine has no return value since the return value would be meaningless.
-*/
-SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file *id, int op, void *pArg){
-#ifdef SQLITE_TEST
- if( op!=SQLITE_FCNTL_COMMIT_PHASETWO ){
- /* Faults are not injected into COMMIT_PHASETWO because, assuming SQLite
- ** is using a regular VFS, it is called after the corresponding
- ** transaction has been committed. Injecting a fault at this point
- ** confuses the test scripts - the COMMIT comand returns SQLITE_NOMEM
- ** but the transaction is committed anyway.
- **
- ** The core must call OsFileControl() though, not OsFileControlHint(),
- ** as if a custom VFS (e.g. zipvfs) returns an error here, it probably
- ** means the commit really has failed and an error should be returned
- ** to the user. */
- DO_OS_MALLOC_TEST(id);
- }
-#endif
- return id->pMethods->xFileControl(id, op, pArg);
-}
-SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file *id, int op, void *pArg){
- (void)id->pMethods->xFileControl(id, op, pArg);
-}
-
-SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id){
- int (*xSectorSize)(sqlite3_file*) = id->pMethods->xSectorSize;
- return (xSectorSize ? xSectorSize(id) : SQLITE_DEFAULT_SECTOR_SIZE);
-}
-SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id){
- return id->pMethods->xDeviceCharacteristics(id);
-}
-SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int offset, int n, int flags){
- return id->pMethods->xShmLock(id, offset, n, flags);
-}
-SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id){
- id->pMethods->xShmBarrier(id);
-}
-SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int deleteFlag){
- return id->pMethods->xShmUnmap(id, deleteFlag);
-}
-SQLITE_PRIVATE int sqlite3OsShmMap(
- sqlite3_file *id, /* Database file handle */
- int iPage,
- int pgsz,
- int bExtend, /* True to extend file if necessary */
- void volatile **pp /* OUT: Pointer to mapping */
-){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xShmMap(id, iPage, pgsz, bExtend, pp);
-}
-
-#if SQLITE_MAX_MMAP_SIZE>0
-/* The real implementation of xFetch and xUnfetch */
-SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64 iOff, int iAmt, void **pp){
- DO_OS_MALLOC_TEST(id);
- return id->pMethods->xFetch(id, iOff, iAmt, pp);
-}
-SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *id, i64 iOff, void *p){
- return id->pMethods->xUnfetch(id, iOff, p);
-}
-#else
-/* No-op stubs to use when memory-mapped I/O is disabled */
-SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64 iOff, int iAmt, void **pp){
- *pp = 0;
- return SQLITE_OK;
-}
-SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *id, i64 iOff, void *p){
- return SQLITE_OK;
-}
-#endif
-
-/*
-** The next group of routines are convenience wrappers around the
-** VFS methods.
-*/
-SQLITE_PRIVATE int sqlite3OsOpen(
- sqlite3_vfs *pVfs,
- const char *zPath,
- sqlite3_file *pFile,
- int flags,
- int *pFlagsOut
-){
- int rc;
- DO_OS_MALLOC_TEST(0);
- /* 0x87f7f is a mask of SQLITE_OPEN_ flags that are valid to be passed
- ** down into the VFS layer. Some SQLITE_OPEN_ flags (for example,
- ** SQLITE_OPEN_FULLMUTEX or SQLITE_OPEN_SHAREDCACHE) are blocked before
- ** reaching the VFS. */
- rc = pVfs->xOpen(pVfs, zPath, pFile, flags & 0x87f7f, pFlagsOut);
- assert( rc==SQLITE_OK || pFile->pMethods==0 );
- return rc;
-}
-SQLITE_PRIVATE int sqlite3OsDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){
- DO_OS_MALLOC_TEST(0);
- assert( dirSync==0 || dirSync==1 );
- return pVfs->xDelete(pVfs, zPath, dirSync);
-}
-SQLITE_PRIVATE int sqlite3OsAccess(
- sqlite3_vfs *pVfs,
- const char *zPath,
- int flags,
- int *pResOut
-){
- DO_OS_MALLOC_TEST(0);
- return pVfs->xAccess(pVfs, zPath, flags, pResOut);
-}
-SQLITE_PRIVATE int sqlite3OsFullPathname(
- sqlite3_vfs *pVfs,
- const char *zPath,
- int nPathOut,
- char *zPathOut
-){
- DO_OS_MALLOC_TEST(0);
- zPathOut[0] = 0;
- return pVfs->xFullPathname(pVfs, zPath, nPathOut, zPathOut);
-}
-#ifndef SQLITE_OMIT_LOAD_EXTENSION
-SQLITE_PRIVATE void *sqlite3OsDlOpen(sqlite3_vfs *pVfs, const char *zPath){
- return pVfs->xDlOpen(pVfs, zPath);
-}
-SQLITE_PRIVATE void sqlite3OsDlError(sqlite3_vfs *pVfs, int nByte, char *zBufOut){
- pVfs->xDlError(pVfs, nByte, zBufOut);
-}
-SQLITE_PRIVATE void (*sqlite3OsDlSym(sqlite3_vfs *pVfs, void *pHdle, const char *zSym))(void){
- return pVfs->xDlSym(pVfs, pHdle, zSym);
-}
-SQLITE_PRIVATE void sqlite3OsDlClose(sqlite3_vfs *pVfs, void *pHandle){
- pVfs->xDlClose(pVfs, pHandle);
-}
-#endif /* SQLITE_OMIT_LOAD_EXTENSION */
-SQLITE_PRIVATE int sqlite3OsRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){
- return pVfs->xRandomness(pVfs, nByte, zBufOut);
-}
-SQLITE_PRIVATE int sqlite3OsSleep(sqlite3_vfs *pVfs, int nMicro){
- return pVfs->xSleep(pVfs, nMicro);
-}
-SQLITE_PRIVATE int sqlite3OsGetLastError(sqlite3_vfs *pVfs){
- return pVfs->xGetLastError ? pVfs->xGetLastError(pVfs, 0, 0) : 0;
-}
-SQLITE_PRIVATE int sqlite3OsCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *pTimeOut){
- int rc;
- /* IMPLEMENTATION-OF: R-49045-42493 SQLite will use the xCurrentTimeInt64()
- ** method to get the current date and time if that method is available
- ** (if iVersion is 2 or greater and the function pointer is not NULL) and
- ** will fall back to xCurrentTime() if xCurrentTimeInt64() is
- ** unavailable.
- */
- if( pVfs->iVersion>=2 && pVfs->xCurrentTimeInt64 ){
- rc = pVfs->xCurrentTimeInt64(pVfs, pTimeOut);
- }else{
- double r;
- rc = pVfs->xCurrentTime(pVfs, &r);
- *pTimeOut = (sqlite3_int64)(r*86400000.0);
- }
- return rc;
-}
-
-SQLITE_PRIVATE int sqlite3OsOpenMalloc(
- sqlite3_vfs *pVfs,
- const char *zFile,
- sqlite3_file **ppFile,
- int flags,
- int *pOutFlags
-){
- int rc;
- sqlite3_file *pFile;
- pFile = (sqlite3_file *)sqlite3MallocZero(pVfs->szOsFile);
- if( pFile ){
- rc = sqlite3OsOpen(pVfs, zFile, pFile, flags, pOutFlags);
- if( rc!=SQLITE_OK ){
- sqlite3_free(pFile);
- }else{
- *ppFile = pFile;
- }
- }else{
- rc = SQLITE_NOMEM_BKPT;
- }
- return rc;
-}
-SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *pFile){
- assert( pFile );
- sqlite3OsClose(pFile);
- sqlite3_free(pFile);
-}
-
-/*
-** This function is a wrapper around the OS specific implementation of
-** sqlite3_os_init(). The purpose of the wrapper is to provide the
-** ability to simulate a malloc failure, so that the handling of an
-** error in sqlite3_os_init() by the upper layers can be tested.
-*/
-SQLITE_PRIVATE int sqlite3OsInit(void){
- void *p = sqlite3_malloc(10);
- if( p==0 ) return SQLITE_NOMEM_BKPT;
- sqlite3_free(p);
- return sqlite3_os_init();
-}
-
-/*
-** The list of all registered VFS implementations.
-*/
-static sqlite3_vfs * SQLITE_WSD vfsList = 0;
-#define vfsList GLOBAL(sqlite3_vfs *, vfsList)
-
-/*
-** Locate a VFS by name. If no name is given, simply return the
-** first VFS on the list.
-*/
-SQLITE_API sqlite3_vfs *SQLITE_STDCALL sqlite3_vfs_find(const char *zVfs){
- sqlite3_vfs *pVfs = 0;
-#if SQLITE_THREADSAFE
- sqlite3_mutex *mutex;
-#endif
-#ifndef SQLITE_OMIT_AUTOINIT
- int rc = sqlite3_initialize();
- if( rc ) return 0;
-#endif
-#if SQLITE_THREADSAFE
- mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
-#endif
- sqlite3_mutex_enter(mutex);
- for(pVfs = vfsList; pVfs; pVfs=pVfs->pNext){
- if( zVfs==0 ) break;
- if( strcmp(zVfs, pVfs->zName)==0 ) break;
- }
- sqlite3_mutex_leave(mutex);
- return pVfs;
-}
-
-/*
-** Unlink a VFS from the linked list
-*/
-static void vfsUnlink(sqlite3_vfs *pVfs){
- assert( sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER)) );
- if( pVfs==0 ){
- /* No-op */
- }else if( vfsList==pVfs ){
- vfsList = pVfs->pNext;
- }else if( vfsList ){
- sqlite3_vfs *p = vfsList;
- while( p->pNext && p->pNext!=pVfs ){
- p = p->pNext;
- }
- if( p->pNext==pVfs ){
- p->pNext = pVfs->pNext;
- }
- }
-}
-
-/*
-** Register a VFS with the system. It is harmless to register the same
-** VFS multiple times. The new VFS becomes the default if makeDflt is
-** true.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_register(sqlite3_vfs *pVfs, int makeDflt){
- MUTEX_LOGIC(sqlite3_mutex *mutex;)
-#ifndef SQLITE_OMIT_AUTOINIT
- int rc = sqlite3_initialize();
- if( rc ) return rc;
-#endif
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( pVfs==0 ) return SQLITE_MISUSE_BKPT;
-#endif
-
- MUTEX_LOGIC( mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER); )
- sqlite3_mutex_enter(mutex);
- vfsUnlink(pVfs);
- if( makeDflt || vfsList==0 ){
- pVfs->pNext = vfsList;
- vfsList = pVfs;
- }else{
- pVfs->pNext = vfsList->pNext;
- vfsList->pNext = pVfs;
- }
- assert(vfsList);
- sqlite3_mutex_leave(mutex);
- return SQLITE_OK;
-}
-
-/*
-** Unregister a VFS so that it is no longer accessible.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_vfs_unregister(sqlite3_vfs *pVfs){
-#if SQLITE_THREADSAFE
- sqlite3_mutex *mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
-#endif
- sqlite3_mutex_enter(mutex);
- vfsUnlink(pVfs);
- sqlite3_mutex_leave(mutex);
- return SQLITE_OK;
-}
-
-/************** End of os.c **************************************************/
-/************** Begin file fault.c *******************************************/
-/*
-** 2008 Jan 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains code to support the concept of "benign"
-** malloc failures (when the xMalloc() or xRealloc() method of the
-** sqlite3_mem_methods structure fails to allocate a block of memory
-** and returns 0).
-**
-** Most malloc failures are non-benign. After they occur, SQLite
-** abandons the current operation and returns an error code (usually
-** SQLITE_NOMEM) to the user. However, sometimes a fault is not necessarily
-** fatal. For example, if a malloc fails while resizing a hash table, this
-** is completely recoverable simply by not carrying out the resize. The
-** hash table will continue to function normally. So a malloc failure
-** during a hash table resize is a benign fault.
-*/
-
-/* #include "sqliteInt.h" */
-
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-
-/*
-** Global variables.
-*/
-typedef struct BenignMallocHooks BenignMallocHooks;
-static SQLITE_WSD struct BenignMallocHooks {
- void (*xBenignBegin)(void);
- void (*xBenignEnd)(void);
-} sqlite3Hooks = { 0, 0 };
-
-/* The "wsdHooks" macro will resolve to the appropriate BenignMallocHooks
-** structure. If writable static data is unsupported on the target,
-** we have to locate the state vector at run-time. In the more common
-** case where writable static data is supported, wsdHooks can refer directly
-** to the "sqlite3Hooks" state vector declared above.
-*/
-#ifdef SQLITE_OMIT_WSD
-# define wsdHooksInit \
- BenignMallocHooks *x = &GLOBAL(BenignMallocHooks,sqlite3Hooks)
-# define wsdHooks x[0]
-#else
-# define wsdHooksInit
-# define wsdHooks sqlite3Hooks
-#endif
-
-
-/*
-** Register hooks to call when sqlite3BeginBenignMalloc() and
-** sqlite3EndBenignMalloc() are called, respectively.
-*/
-SQLITE_PRIVATE void sqlite3BenignMallocHooks(
- void (*xBenignBegin)(void),
- void (*xBenignEnd)(void)
-){
- wsdHooksInit;
- wsdHooks.xBenignBegin = xBenignBegin;
- wsdHooks.xBenignEnd = xBenignEnd;
-}
-
-/*
-** This (sqlite3EndBenignMalloc()) is called by SQLite code to indicate that
-** subsequent malloc failures are benign. A call to sqlite3EndBenignMalloc()
-** indicates that subsequent malloc failures are non-benign.
-*/
-SQLITE_PRIVATE void sqlite3BeginBenignMalloc(void){
- wsdHooksInit;
- if( wsdHooks.xBenignBegin ){
- wsdHooks.xBenignBegin();
- }
-}
-SQLITE_PRIVATE void sqlite3EndBenignMalloc(void){
- wsdHooksInit;
- if( wsdHooks.xBenignEnd ){
- wsdHooks.xBenignEnd();
- }
-}
-
-#endif /* #ifndef SQLITE_OMIT_BUILTIN_TEST */
-
-/************** End of fault.c ***********************************************/
-/************** Begin file mem0.c ********************************************/
-/*
-** 2008 October 28
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains a no-op memory allocation drivers for use when
-** SQLITE_ZERO_MALLOC is defined. The allocation drivers implemented
-** here always fail. SQLite will not operate with these drivers. These
-** are merely placeholders. Real drivers must be substituted using
-** sqlite3_config() before SQLite will operate.
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** This version of the memory allocator is the default. It is
-** used when no other memory allocator is specified using compile-time
-** macros.
-*/
-#ifdef SQLITE_ZERO_MALLOC
-
-/*
-** No-op versions of all memory allocation routines
-*/
-static void *sqlite3MemMalloc(int nByte){ return 0; }
-static void sqlite3MemFree(void *pPrior){ return; }
-static void *sqlite3MemRealloc(void *pPrior, int nByte){ return 0; }
-static int sqlite3MemSize(void *pPrior){ return 0; }
-static int sqlite3MemRoundup(int n){ return n; }
-static int sqlite3MemInit(void *NotUsed){ return SQLITE_OK; }
-static void sqlite3MemShutdown(void *NotUsed){ return; }
-
-/*
-** This routine is the only routine in this file with external linkage.
-**
-** Populate the low-level memory allocation function pointers in
-** sqlite3GlobalConfig.m with pointers to the routines in this file.
-*/
-SQLITE_PRIVATE void sqlite3MemSetDefault(void){
- static const sqlite3_mem_methods defaultMethods = {
- sqlite3MemMalloc,
- sqlite3MemFree,
- sqlite3MemRealloc,
- sqlite3MemSize,
- sqlite3MemRoundup,
- sqlite3MemInit,
- sqlite3MemShutdown,
- 0
- };
- sqlite3_config(SQLITE_CONFIG_MALLOC, &defaultMethods);
-}
-
-#endif /* SQLITE_ZERO_MALLOC */
-
-/************** End of mem0.c ************************************************/
-/************** Begin file mem1.c ********************************************/
-/*
-** 2007 August 14
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains low-level memory allocation drivers for when
-** SQLite will use the standard C-library malloc/realloc/free interface
-** to obtain the memory it needs.
-**
-** This file contains implementations of the low-level memory allocation
-** routines specified in the sqlite3_mem_methods object. The content of
-** this file is only used if SQLITE_SYSTEM_MALLOC is defined. The
-** SQLITE_SYSTEM_MALLOC macro is defined automatically if neither the
-** SQLITE_MEMDEBUG nor the SQLITE_WIN32_MALLOC macros are defined. The
-** default configuration is to use memory allocation routines in this
-** file.
-**
-** C-preprocessor macro summary:
-**
-** HAVE_MALLOC_USABLE_SIZE The configure script sets this symbol if
-** the malloc_usable_size() interface exists
-** on the target platform. Or, this symbol
-** can be set manually, if desired.
-** If an equivalent interface exists by
-** a different name, using a separate -D
-** option to rename it.
-**
-** SQLITE_WITHOUT_ZONEMALLOC Some older macs lack support for the zone
-** memory allocator. Set this symbol to enable
-** building on older macs.
-**
-** SQLITE_WITHOUT_MSIZE Set this symbol to disable the use of
-** _msize() on windows systems. This might
-** be necessary when compiling for Delphi,
-** for example.
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** This version of the memory allocator is the default. It is
-** used when no other memory allocator is specified using compile-time
-** macros.
-*/
-#ifdef SQLITE_SYSTEM_MALLOC
-#if defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC)
-
-/*
-** Use the zone allocator available on apple products unless the
-** SQLITE_WITHOUT_ZONEMALLOC symbol is defined.
-*/
-#include
-#include
-#include
-static malloc_zone_t* _sqliteZone_;
-#define SQLITE_MALLOC(x) malloc_zone_malloc(_sqliteZone_, (x))
-#define SQLITE_FREE(x) malloc_zone_free(_sqliteZone_, (x));
-#define SQLITE_REALLOC(x,y) malloc_zone_realloc(_sqliteZone_, (x), (y))
-#define SQLITE_MALLOCSIZE(x) \
- (_sqliteZone_ ? _sqliteZone_->size(_sqliteZone_,x) : malloc_size(x))
-
-#else /* if not __APPLE__ */
-
-/*
-** Use standard C library malloc and free on non-Apple systems.
-** Also used by Apple systems if SQLITE_WITHOUT_ZONEMALLOC is defined.
-*/
-#define SQLITE_MALLOC(x) malloc(x)
-#define SQLITE_FREE(x) free(x)
-#define SQLITE_REALLOC(x,y) realloc((x),(y))
-
-/*
-** The malloc.h header file is needed for malloc_usable_size() function
-** on some systems (e.g. Linux).
-*/
-#if HAVE_MALLOC_H && HAVE_MALLOC_USABLE_SIZE
-# define SQLITE_USE_MALLOC_H 1
-# define SQLITE_USE_MALLOC_USABLE_SIZE 1
-/*
-** The MSVCRT has malloc_usable_size(), but it is called _msize(). The
-** use of _msize() is automatic, but can be disabled by compiling with
-** -DSQLITE_WITHOUT_MSIZE. Using the _msize() function also requires
-** the malloc.h header file.
-*/
-#elif defined(_MSC_VER) && !defined(SQLITE_WITHOUT_MSIZE)
-# define SQLITE_USE_MALLOC_H
-# define SQLITE_USE_MSIZE
-#endif
-
-/*
-** Include the malloc.h header file, if necessary. Also set define macro
-** SQLITE_MALLOCSIZE to the appropriate function name, which is _msize()
-** for MSVC and malloc_usable_size() for most other systems (e.g. Linux).
-** The memory size function can always be overridden manually by defining
-** the macro SQLITE_MALLOCSIZE to the desired function name.
-*/
-#if defined(SQLITE_USE_MALLOC_H)
-# include
-# if defined(SQLITE_USE_MALLOC_USABLE_SIZE)
-# if !defined(SQLITE_MALLOCSIZE)
-# define SQLITE_MALLOCSIZE(x) malloc_usable_size(x)
-# endif
-# elif defined(SQLITE_USE_MSIZE)
-# if !defined(SQLITE_MALLOCSIZE)
-# define SQLITE_MALLOCSIZE _msize
-# endif
-# endif
-#endif /* defined(SQLITE_USE_MALLOC_H) */
-
-#endif /* __APPLE__ or not __APPLE__ */
-
-/*
-** Like malloc(), but remember the size of the allocation
-** so that we can find it later using sqlite3MemSize().
-**
-** For this low-level routine, we are guaranteed that nByte>0 because
-** cases of nByte<=0 will be intercepted and dealt with by higher level
-** routines.
-*/
-static void *sqlite3MemMalloc(int nByte){
-#ifdef SQLITE_MALLOCSIZE
- void *p = SQLITE_MALLOC( nByte );
- if( p==0 ){
- testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes of memory", nByte);
- }
- return p;
-#else
- sqlite3_int64 *p;
- assert( nByte>0 );
- nByte = ROUND8(nByte);
- p = SQLITE_MALLOC( nByte+8 );
- if( p ){
- p[0] = nByte;
- p++;
- }else{
- testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes of memory", nByte);
- }
- return (void *)p;
-#endif
-}
-
-/*
-** Like free() but works for allocations obtained from sqlite3MemMalloc()
-** or sqlite3MemRealloc().
-**
-** For this low-level routine, we already know that pPrior!=0 since
-** cases where pPrior==0 will have been intecepted and dealt with
-** by higher-level routines.
-*/
-static void sqlite3MemFree(void *pPrior){
-#ifdef SQLITE_MALLOCSIZE
- SQLITE_FREE(pPrior);
-#else
- sqlite3_int64 *p = (sqlite3_int64*)pPrior;
- assert( pPrior!=0 );
- p--;
- SQLITE_FREE(p);
-#endif
-}
-
-/*
-** Report the allocated size of a prior return from xMalloc()
-** or xRealloc().
-*/
-static int sqlite3MemSize(void *pPrior){
-#ifdef SQLITE_MALLOCSIZE
- assert( pPrior!=0 );
- return (int)SQLITE_MALLOCSIZE(pPrior);
-#else
- sqlite3_int64 *p;
- assert( pPrior!=0 );
- p = (sqlite3_int64*)pPrior;
- p--;
- return (int)p[0];
-#endif
-}
-
-/*
-** Like realloc(). Resize an allocation previously obtained from
-** sqlite3MemMalloc().
-**
-** For this low-level interface, we know that pPrior!=0. Cases where
-** pPrior==0 while have been intercepted by higher-level routine and
-** redirected to xMalloc. Similarly, we know that nByte>0 because
-** cases where nByte<=0 will have been intercepted by higher-level
-** routines and redirected to xFree.
-*/
-static void *sqlite3MemRealloc(void *pPrior, int nByte){
-#ifdef SQLITE_MALLOCSIZE
- void *p = SQLITE_REALLOC(pPrior, nByte);
- if( p==0 ){
- testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_NOMEM,
- "failed memory resize %u to %u bytes",
- SQLITE_MALLOCSIZE(pPrior), nByte);
- }
- return p;
-#else
- sqlite3_int64 *p = (sqlite3_int64*)pPrior;
- assert( pPrior!=0 && nByte>0 );
- assert( nByte==ROUND8(nByte) ); /* EV: R-46199-30249 */
- p--;
- p = SQLITE_REALLOC(p, nByte+8 );
- if( p ){
- p[0] = nByte;
- p++;
- }else{
- testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_NOMEM,
- "failed memory resize %u to %u bytes",
- sqlite3MemSize(pPrior), nByte);
- }
- return (void*)p;
-#endif
-}
-
-/*
-** Round up a request size to the next valid allocation size.
-*/
-static int sqlite3MemRoundup(int n){
- return ROUND8(n);
-}
-
-/*
-** Initialize this module.
-*/
-static int sqlite3MemInit(void *NotUsed){
-#if defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC)
- int cpuCount;
- size_t len;
- if( _sqliteZone_ ){
- return SQLITE_OK;
- }
- len = sizeof(cpuCount);
- /* One usually wants to use hw.acctivecpu for MT decisions, but not here */
- sysctlbyname("hw.ncpu", &cpuCount, &len, NULL, 0);
- if( cpuCount>1 ){
- /* defer MT decisions to system malloc */
- _sqliteZone_ = malloc_default_zone();
- }else{
- /* only 1 core, use our own zone to contention over global locks,
- ** e.g. we have our own dedicated locks */
- bool success;
- malloc_zone_t* newzone = malloc_create_zone(4096, 0);
- malloc_set_zone_name(newzone, "Sqlite_Heap");
- do{
- success = OSAtomicCompareAndSwapPtrBarrier(NULL, newzone,
- (void * volatile *)&_sqliteZone_);
- }while(!_sqliteZone_);
- if( !success ){
- /* somebody registered a zone first */
- malloc_destroy_zone(newzone);
- }
- }
-#endif
- UNUSED_PARAMETER(NotUsed);
- return SQLITE_OK;
-}
-
-/*
-** Deinitialize this module.
-*/
-static void sqlite3MemShutdown(void *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- return;
-}
-
-/*
-** This routine is the only routine in this file with external linkage.
-**
-** Populate the low-level memory allocation function pointers in
-** sqlite3GlobalConfig.m with pointers to the routines in this file.
-*/
-SQLITE_PRIVATE void sqlite3MemSetDefault(void){
- static const sqlite3_mem_methods defaultMethods = {
- sqlite3MemMalloc,
- sqlite3MemFree,
- sqlite3MemRealloc,
- sqlite3MemSize,
- sqlite3MemRoundup,
- sqlite3MemInit,
- sqlite3MemShutdown,
- 0
- };
- sqlite3_config(SQLITE_CONFIG_MALLOC, &defaultMethods);
-}
-
-#endif /* SQLITE_SYSTEM_MALLOC */
-
-/************** End of mem1.c ************************************************/
-/************** Begin file mem2.c ********************************************/
-/*
-** 2007 August 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains low-level memory allocation drivers for when
-** SQLite will use the standard C-library malloc/realloc/free interface
-** to obtain the memory it needs while adding lots of additional debugging
-** information to each allocation in order to help detect and fix memory
-** leaks and memory usage errors.
-**
-** This file contains implementations of the low-level memory allocation
-** routines specified in the sqlite3_mem_methods object.
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** This version of the memory allocator is used only if the
-** SQLITE_MEMDEBUG macro is defined
-*/
-#ifdef SQLITE_MEMDEBUG
-
-/*
-** The backtrace functionality is only available with GLIBC
-*/
-#ifdef __GLIBC__
- extern int backtrace(void**,int);
- extern void backtrace_symbols_fd(void*const*,int,int);
-#else
-# define backtrace(A,B) 1
-# define backtrace_symbols_fd(A,B,C)
-#endif
-/* #include */
-
-/*
-** Each memory allocation looks like this:
-**
-** ------------------------------------------------------------------------
-** | Title | backtrace pointers | MemBlockHdr | allocation | EndGuard |
-** ------------------------------------------------------------------------
-**
-** The application code sees only a pointer to the allocation. We have
-** to back up from the allocation pointer to find the MemBlockHdr. The
-** MemBlockHdr tells us the size of the allocation and the number of
-** backtrace pointers. There is also a guard word at the end of the
-** MemBlockHdr.
-*/
-struct MemBlockHdr {
- i64 iSize; /* Size of this allocation */
- struct MemBlockHdr *pNext, *pPrev; /* Linked list of all unfreed memory */
- char nBacktrace; /* Number of backtraces on this alloc */
- char nBacktraceSlots; /* Available backtrace slots */
- u8 nTitle; /* Bytes of title; includes '\0' */
- u8 eType; /* Allocation type code */
- int iForeGuard; /* Guard word for sanity */
-};
-
-/*
-** Guard words
-*/
-#define FOREGUARD 0x80F5E153
-#define REARGUARD 0xE4676B53
-
-/*
-** Number of malloc size increments to track.
-*/
-#define NCSIZE 1000
-
-/*
-** All of the static variables used by this module are collected
-** into a single structure named "mem". This is to keep the
-** static variables organized and to reduce namespace pollution
-** when this module is combined with other in the amalgamation.
-*/
-static struct {
-
- /*
- ** Mutex to control access to the memory allocation subsystem.
- */
- sqlite3_mutex *mutex;
-
- /*
- ** Head and tail of a linked list of all outstanding allocations
- */
- struct MemBlockHdr *pFirst;
- struct MemBlockHdr *pLast;
-
- /*
- ** The number of levels of backtrace to save in new allocations.
- */
- int nBacktrace;
- void (*xBacktrace)(int, int, void **);
-
- /*
- ** Title text to insert in front of each block
- */
- int nTitle; /* Bytes of zTitle to save. Includes '\0' and padding */
- char zTitle[100]; /* The title text */
-
- /*
- ** sqlite3MallocDisallow() increments the following counter.
- ** sqlite3MallocAllow() decrements it.
- */
- int disallow; /* Do not allow memory allocation */
-
- /*
- ** Gather statistics on the sizes of memory allocations.
- ** nAlloc[i] is the number of allocation attempts of i*8
- ** bytes. i==NCSIZE is the number of allocation attempts for
- ** sizes more than NCSIZE*8 bytes.
- */
- int nAlloc[NCSIZE]; /* Total number of allocations */
- int nCurrent[NCSIZE]; /* Current number of allocations */
- int mxCurrent[NCSIZE]; /* Highwater mark for nCurrent */
-
-} mem;
-
-
-/*
-** Adjust memory usage statistics
-*/
-static void adjustStats(int iSize, int increment){
- int i = ROUND8(iSize)/8;
- if( i>NCSIZE-1 ){
- i = NCSIZE - 1;
- }
- if( increment>0 ){
- mem.nAlloc[i]++;
- mem.nCurrent[i]++;
- if( mem.nCurrent[i]>mem.mxCurrent[i] ){
- mem.mxCurrent[i] = mem.nCurrent[i];
- }
- }else{
- mem.nCurrent[i]--;
- assert( mem.nCurrent[i]>=0 );
- }
-}
-
-/*
-** Given an allocation, find the MemBlockHdr for that allocation.
-**
-** This routine checks the guards at either end of the allocation and
-** if they are incorrect it asserts.
-*/
-static struct MemBlockHdr *sqlite3MemsysGetHeader(void *pAllocation){
- struct MemBlockHdr *p;
- int *pInt;
- u8 *pU8;
- int nReserve;
-
- p = (struct MemBlockHdr*)pAllocation;
- p--;
- assert( p->iForeGuard==(int)FOREGUARD );
- nReserve = ROUND8(p->iSize);
- pInt = (int*)pAllocation;
- pU8 = (u8*)pAllocation;
- assert( pInt[nReserve/sizeof(int)]==(int)REARGUARD );
- /* This checks any of the "extra" bytes allocated due
- ** to rounding up to an 8 byte boundary to ensure
- ** they haven't been overwritten.
- */
- while( nReserve-- > p->iSize ) assert( pU8[nReserve]==0x65 );
- return p;
-}
-
-/*
-** Return the number of bytes currently allocated at address p.
-*/
-static int sqlite3MemSize(void *p){
- struct MemBlockHdr *pHdr;
- if( !p ){
- return 0;
- }
- pHdr = sqlite3MemsysGetHeader(p);
- return (int)pHdr->iSize;
-}
-
-/*
-** Initialize the memory allocation subsystem.
-*/
-static int sqlite3MemInit(void *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- assert( (sizeof(struct MemBlockHdr)&7) == 0 );
- if( !sqlite3GlobalConfig.bMemstat ){
- /* If memory status is enabled, then the malloc.c wrapper will already
- ** hold the STATIC_MEM mutex when the routines here are invoked. */
- mem.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
- }
- return SQLITE_OK;
-}
-
-/*
-** Deinitialize the memory allocation subsystem.
-*/
-static void sqlite3MemShutdown(void *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- mem.mutex = 0;
-}
-
-/*
-** Round up a request size to the next valid allocation size.
-*/
-static int sqlite3MemRoundup(int n){
- return ROUND8(n);
-}
-
-/*
-** Fill a buffer with pseudo-random bytes. This is used to preset
-** the content of a new memory allocation to unpredictable values and
-** to clear the content of a freed allocation to unpredictable values.
-*/
-static void randomFill(char *pBuf, int nByte){
- unsigned int x, y, r;
- x = SQLITE_PTR_TO_INT(pBuf);
- y = nByte | 1;
- while( nByte >= 4 ){
- x = (x>>1) ^ (-(int)(x&1) & 0xd0000001);
- y = y*1103515245 + 12345;
- r = x ^ y;
- *(int*)pBuf = r;
- pBuf += 4;
- nByte -= 4;
- }
- while( nByte-- > 0 ){
- x = (x>>1) ^ (-(int)(x&1) & 0xd0000001);
- y = y*1103515245 + 12345;
- r = x ^ y;
- *(pBuf++) = r & 0xff;
- }
-}
-
-/*
-** Allocate nByte bytes of memory.
-*/
-static void *sqlite3MemMalloc(int nByte){
- struct MemBlockHdr *pHdr;
- void **pBt;
- char *z;
- int *pInt;
- void *p = 0;
- int totalSize;
- int nReserve;
- sqlite3_mutex_enter(mem.mutex);
- assert( mem.disallow==0 );
- nReserve = ROUND8(nByte);
- totalSize = nReserve + sizeof(*pHdr) + sizeof(int) +
- mem.nBacktrace*sizeof(void*) + mem.nTitle;
- p = malloc(totalSize);
- if( p ){
- z = p;
- pBt = (void**)&z[mem.nTitle];
- pHdr = (struct MemBlockHdr*)&pBt[mem.nBacktrace];
- pHdr->pNext = 0;
- pHdr->pPrev = mem.pLast;
- if( mem.pLast ){
- mem.pLast->pNext = pHdr;
- }else{
- mem.pFirst = pHdr;
- }
- mem.pLast = pHdr;
- pHdr->iForeGuard = FOREGUARD;
- pHdr->eType = MEMTYPE_HEAP;
- pHdr->nBacktraceSlots = mem.nBacktrace;
- pHdr->nTitle = mem.nTitle;
- if( mem.nBacktrace ){
- void *aAddr[40];
- pHdr->nBacktrace = backtrace(aAddr, mem.nBacktrace+1)-1;
- memcpy(pBt, &aAddr[1], pHdr->nBacktrace*sizeof(void*));
- assert(pBt[0]);
- if( mem.xBacktrace ){
- mem.xBacktrace(nByte, pHdr->nBacktrace-1, &aAddr[1]);
- }
- }else{
- pHdr->nBacktrace = 0;
- }
- if( mem.nTitle ){
- memcpy(z, mem.zTitle, mem.nTitle);
- }
- pHdr->iSize = nByte;
- adjustStats(nByte, +1);
- pInt = (int*)&pHdr[1];
- pInt[nReserve/sizeof(int)] = REARGUARD;
- randomFill((char*)pInt, nByte);
- memset(((char*)pInt)+nByte, 0x65, nReserve-nByte);
- p = (void*)pInt;
- }
- sqlite3_mutex_leave(mem.mutex);
- return p;
-}
-
-/*
-** Free memory.
-*/
-static void sqlite3MemFree(void *pPrior){
- struct MemBlockHdr *pHdr;
- void **pBt;
- char *z;
- assert( sqlite3GlobalConfig.bMemstat || sqlite3GlobalConfig.bCoreMutex==0
- || mem.mutex!=0 );
- pHdr = sqlite3MemsysGetHeader(pPrior);
- pBt = (void**)pHdr;
- pBt -= pHdr->nBacktraceSlots;
- sqlite3_mutex_enter(mem.mutex);
- if( pHdr->pPrev ){
- assert( pHdr->pPrev->pNext==pHdr );
- pHdr->pPrev->pNext = pHdr->pNext;
- }else{
- assert( mem.pFirst==pHdr );
- mem.pFirst = pHdr->pNext;
- }
- if( pHdr->pNext ){
- assert( pHdr->pNext->pPrev==pHdr );
- pHdr->pNext->pPrev = pHdr->pPrev;
- }else{
- assert( mem.pLast==pHdr );
- mem.pLast = pHdr->pPrev;
- }
- z = (char*)pBt;
- z -= pHdr->nTitle;
- adjustStats((int)pHdr->iSize, -1);
- randomFill(z, sizeof(void*)*pHdr->nBacktraceSlots + sizeof(*pHdr) +
- (int)pHdr->iSize + sizeof(int) + pHdr->nTitle);
- free(z);
- sqlite3_mutex_leave(mem.mutex);
-}
-
-/*
-** Change the size of an existing memory allocation.
-**
-** For this debugging implementation, we *always* make a copy of the
-** allocation into a new place in memory. In this way, if the
-** higher level code is using pointer to the old allocation, it is
-** much more likely to break and we are much more liking to find
-** the error.
-*/
-static void *sqlite3MemRealloc(void *pPrior, int nByte){
- struct MemBlockHdr *pOldHdr;
- void *pNew;
- assert( mem.disallow==0 );
- assert( (nByte & 7)==0 ); /* EV: R-46199-30249 */
- pOldHdr = sqlite3MemsysGetHeader(pPrior);
- pNew = sqlite3MemMalloc(nByte);
- if( pNew ){
- memcpy(pNew, pPrior, (int)(nByteiSize ? nByte : pOldHdr->iSize));
- if( nByte>pOldHdr->iSize ){
- randomFill(&((char*)pNew)[pOldHdr->iSize], nByte - (int)pOldHdr->iSize);
- }
- sqlite3MemFree(pPrior);
- }
- return pNew;
-}
-
-/*
-** Populate the low-level memory allocation function pointers in
-** sqlite3GlobalConfig.m with pointers to the routines in this file.
-*/
-SQLITE_PRIVATE void sqlite3MemSetDefault(void){
- static const sqlite3_mem_methods defaultMethods = {
- sqlite3MemMalloc,
- sqlite3MemFree,
- sqlite3MemRealloc,
- sqlite3MemSize,
- sqlite3MemRoundup,
- sqlite3MemInit,
- sqlite3MemShutdown,
- 0
- };
- sqlite3_config(SQLITE_CONFIG_MALLOC, &defaultMethods);
-}
-
-/*
-** Set the "type" of an allocation.
-*/
-SQLITE_PRIVATE void sqlite3MemdebugSetType(void *p, u8 eType){
- if( p && sqlite3GlobalConfig.m.xMalloc==sqlite3MemMalloc ){
- struct MemBlockHdr *pHdr;
- pHdr = sqlite3MemsysGetHeader(p);
- assert( pHdr->iForeGuard==FOREGUARD );
- pHdr->eType = eType;
- }
-}
-
-/*
-** Return TRUE if the mask of type in eType matches the type of the
-** allocation p. Also return true if p==NULL.
-**
-** This routine is designed for use within an assert() statement, to
-** verify the type of an allocation. For example:
-**
-** assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
-*/
-SQLITE_PRIVATE int sqlite3MemdebugHasType(void *p, u8 eType){
- int rc = 1;
- if( p && sqlite3GlobalConfig.m.xMalloc==sqlite3MemMalloc ){
- struct MemBlockHdr *pHdr;
- pHdr = sqlite3MemsysGetHeader(p);
- assert( pHdr->iForeGuard==FOREGUARD ); /* Allocation is valid */
- if( (pHdr->eType&eType)==0 ){
- rc = 0;
- }
- }
- return rc;
-}
-
-/*
-** Return TRUE if the mask of type in eType matches no bits of the type of the
-** allocation p. Also return true if p==NULL.
-**
-** This routine is designed for use within an assert() statement, to
-** verify the type of an allocation. For example:
-**
-** assert( sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) );
-*/
-SQLITE_PRIVATE int sqlite3MemdebugNoType(void *p, u8 eType){
- int rc = 1;
- if( p && sqlite3GlobalConfig.m.xMalloc==sqlite3MemMalloc ){
- struct MemBlockHdr *pHdr;
- pHdr = sqlite3MemsysGetHeader(p);
- assert( pHdr->iForeGuard==FOREGUARD ); /* Allocation is valid */
- if( (pHdr->eType&eType)!=0 ){
- rc = 0;
- }
- }
- return rc;
-}
-
-/*
-** Set the number of backtrace levels kept for each allocation.
-** A value of zero turns off backtracing. The number is always rounded
-** up to a multiple of 2.
-*/
-SQLITE_PRIVATE void sqlite3MemdebugBacktrace(int depth){
- if( depth<0 ){ depth = 0; }
- if( depth>20 ){ depth = 20; }
- depth = (depth+1)&0xfe;
- mem.nBacktrace = depth;
-}
-
-SQLITE_PRIVATE void sqlite3MemdebugBacktraceCallback(void (*xBacktrace)(int, int, void **)){
- mem.xBacktrace = xBacktrace;
-}
-
-/*
-** Set the title string for subsequent allocations.
-*/
-SQLITE_PRIVATE void sqlite3MemdebugSettitle(const char *zTitle){
- unsigned int n = sqlite3Strlen30(zTitle) + 1;
- sqlite3_mutex_enter(mem.mutex);
- if( n>=sizeof(mem.zTitle) ) n = sizeof(mem.zTitle)-1;
- memcpy(mem.zTitle, zTitle, n);
- mem.zTitle[n] = 0;
- mem.nTitle = ROUND8(n);
- sqlite3_mutex_leave(mem.mutex);
-}
-
-SQLITE_PRIVATE void sqlite3MemdebugSync(){
- struct MemBlockHdr *pHdr;
- for(pHdr=mem.pFirst; pHdr; pHdr=pHdr->pNext){
- void **pBt = (void**)pHdr;
- pBt -= pHdr->nBacktraceSlots;
- mem.xBacktrace((int)pHdr->iSize, pHdr->nBacktrace-1, &pBt[1]);
- }
-}
-
-/*
-** Open the file indicated and write a log of all unfreed memory
-** allocations into that log.
-*/
-SQLITE_PRIVATE void sqlite3MemdebugDump(const char *zFilename){
- FILE *out;
- struct MemBlockHdr *pHdr;
- void **pBt;
- int i;
- out = fopen(zFilename, "w");
- if( out==0 ){
- fprintf(stderr, "** Unable to output memory debug output log: %s **\n",
- zFilename);
- return;
- }
- for(pHdr=mem.pFirst; pHdr; pHdr=pHdr->pNext){
- char *z = (char*)pHdr;
- z -= pHdr->nBacktraceSlots*sizeof(void*) + pHdr->nTitle;
- fprintf(out, "**** %lld bytes at %p from %s ****\n",
- pHdr->iSize, &pHdr[1], pHdr->nTitle ? z : "???");
- if( pHdr->nBacktrace ){
- fflush(out);
- pBt = (void**)pHdr;
- pBt -= pHdr->nBacktraceSlots;
- backtrace_symbols_fd(pBt, pHdr->nBacktrace, fileno(out));
- fprintf(out, "\n");
- }
- }
- fprintf(out, "COUNTS:\n");
- for(i=0; i=1 );
- size = mem3.aPool[i-1].u.hdr.size4x/4;
- assert( size==mem3.aPool[i+size-1].u.hdr.prevSize );
- assert( size>=2 );
- if( size <= MX_SMALL ){
- memsys3UnlinkFromList(i, &mem3.aiSmall[size-2]);
- }else{
- hash = size % N_HASH;
- memsys3UnlinkFromList(i, &mem3.aiHash[hash]);
- }
-}
-
-/*
-** Link the chunk at mem3.aPool[i] so that is on the list rooted
-** at *pRoot.
-*/
-static void memsys3LinkIntoList(u32 i, u32 *pRoot){
- assert( sqlite3_mutex_held(mem3.mutex) );
- mem3.aPool[i].u.list.next = *pRoot;
- mem3.aPool[i].u.list.prev = 0;
- if( *pRoot ){
- mem3.aPool[*pRoot].u.list.prev = i;
- }
- *pRoot = i;
-}
-
-/*
-** Link the chunk at index i into either the appropriate
-** small chunk list, or into the large chunk hash table.
-*/
-static void memsys3Link(u32 i){
- u32 size, hash;
- assert( sqlite3_mutex_held(mem3.mutex) );
- assert( i>=1 );
- assert( (mem3.aPool[i-1].u.hdr.size4x & 1)==0 );
- size = mem3.aPool[i-1].u.hdr.size4x/4;
- assert( size==mem3.aPool[i+size-1].u.hdr.prevSize );
- assert( size>=2 );
- if( size <= MX_SMALL ){
- memsys3LinkIntoList(i, &mem3.aiSmall[size-2]);
- }else{
- hash = size % N_HASH;
- memsys3LinkIntoList(i, &mem3.aiHash[hash]);
- }
-}
-
-/*
-** If the STATIC_MEM mutex is not already held, obtain it now. The mutex
-** will already be held (obtained by code in malloc.c) if
-** sqlite3GlobalConfig.bMemStat is true.
-*/
-static void memsys3Enter(void){
- if( sqlite3GlobalConfig.bMemstat==0 && mem3.mutex==0 ){
- mem3.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
- }
- sqlite3_mutex_enter(mem3.mutex);
-}
-static void memsys3Leave(void){
- sqlite3_mutex_leave(mem3.mutex);
-}
-
-/*
-** Called when we are unable to satisfy an allocation of nBytes.
-*/
-static void memsys3OutOfMemory(int nByte){
- if( !mem3.alarmBusy ){
- mem3.alarmBusy = 1;
- assert( sqlite3_mutex_held(mem3.mutex) );
- sqlite3_mutex_leave(mem3.mutex);
- sqlite3_release_memory(nByte);
- sqlite3_mutex_enter(mem3.mutex);
- mem3.alarmBusy = 0;
- }
-}
-
-
-/*
-** Chunk i is a free chunk that has been unlinked. Adjust its
-** size parameters for check-out and return a pointer to the
-** user portion of the chunk.
-*/
-static void *memsys3Checkout(u32 i, u32 nBlock){
- u32 x;
- assert( sqlite3_mutex_held(mem3.mutex) );
- assert( i>=1 );
- assert( mem3.aPool[i-1].u.hdr.size4x/4==nBlock );
- assert( mem3.aPool[i+nBlock-1].u.hdr.prevSize==nBlock );
- x = mem3.aPool[i-1].u.hdr.size4x;
- mem3.aPool[i-1].u.hdr.size4x = nBlock*4 | 1 | (x&2);
- mem3.aPool[i+nBlock-1].u.hdr.prevSize = nBlock;
- mem3.aPool[i+nBlock-1].u.hdr.size4x |= 2;
- return &mem3.aPool[i];
-}
-
-/*
-** Carve a piece off of the end of the mem3.iMaster free chunk.
-** Return a pointer to the new allocation. Or, if the master chunk
-** is not large enough, return 0.
-*/
-static void *memsys3FromMaster(u32 nBlock){
- assert( sqlite3_mutex_held(mem3.mutex) );
- assert( mem3.szMaster>=nBlock );
- if( nBlock>=mem3.szMaster-1 ){
- /* Use the entire master */
- void *p = memsys3Checkout(mem3.iMaster, mem3.szMaster);
- mem3.iMaster = 0;
- mem3.szMaster = 0;
- mem3.mnMaster = 0;
- return p;
- }else{
- /* Split the master block. Return the tail. */
- u32 newi, x;
- newi = mem3.iMaster + mem3.szMaster - nBlock;
- assert( newi > mem3.iMaster+1 );
- mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.prevSize = nBlock;
- mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.size4x |= 2;
- mem3.aPool[newi-1].u.hdr.size4x = nBlock*4 + 1;
- mem3.szMaster -= nBlock;
- mem3.aPool[newi-1].u.hdr.prevSize = mem3.szMaster;
- x = mem3.aPool[mem3.iMaster-1].u.hdr.size4x & 2;
- mem3.aPool[mem3.iMaster-1].u.hdr.size4x = mem3.szMaster*4 | x;
- if( mem3.szMaster < mem3.mnMaster ){
- mem3.mnMaster = mem3.szMaster;
- }
- return (void*)&mem3.aPool[newi];
- }
-}
-
-/*
-** *pRoot is the head of a list of free chunks of the same size
-** or same size hash. In other words, *pRoot is an entry in either
-** mem3.aiSmall[] or mem3.aiHash[].
-**
-** This routine examines all entries on the given list and tries
-** to coalesce each entries with adjacent free chunks.
-**
-** If it sees a chunk that is larger than mem3.iMaster, it replaces
-** the current mem3.iMaster with the new larger chunk. In order for
-** this mem3.iMaster replacement to work, the master chunk must be
-** linked into the hash tables. That is not the normal state of
-** affairs, of course. The calling routine must link the master
-** chunk before invoking this routine, then must unlink the (possibly
-** changed) master chunk once this routine has finished.
-*/
-static void memsys3Merge(u32 *pRoot){
- u32 iNext, prev, size, i, x;
-
- assert( sqlite3_mutex_held(mem3.mutex) );
- for(i=*pRoot; i>0; i=iNext){
- iNext = mem3.aPool[i].u.list.next;
- size = mem3.aPool[i-1].u.hdr.size4x;
- assert( (size&1)==0 );
- if( (size&2)==0 ){
- memsys3UnlinkFromList(i, pRoot);
- assert( i > mem3.aPool[i-1].u.hdr.prevSize );
- prev = i - mem3.aPool[i-1].u.hdr.prevSize;
- if( prev==iNext ){
- iNext = mem3.aPool[prev].u.list.next;
- }
- memsys3Unlink(prev);
- size = i + size/4 - prev;
- x = mem3.aPool[prev-1].u.hdr.size4x & 2;
- mem3.aPool[prev-1].u.hdr.size4x = size*4 | x;
- mem3.aPool[prev+size-1].u.hdr.prevSize = size;
- memsys3Link(prev);
- i = prev;
- }else{
- size /= 4;
- }
- if( size>mem3.szMaster ){
- mem3.iMaster = i;
- mem3.szMaster = size;
- }
- }
-}
-
-/*
-** Return a block of memory of at least nBytes in size.
-** Return NULL if unable.
-**
-** This function assumes that the necessary mutexes, if any, are
-** already held by the caller. Hence "Unsafe".
-*/
-static void *memsys3MallocUnsafe(int nByte){
- u32 i;
- u32 nBlock;
- u32 toFree;
-
- assert( sqlite3_mutex_held(mem3.mutex) );
- assert( sizeof(Mem3Block)==8 );
- if( nByte<=12 ){
- nBlock = 2;
- }else{
- nBlock = (nByte + 11)/8;
- }
- assert( nBlock>=2 );
-
- /* STEP 1:
- ** Look for an entry of the correct size in either the small
- ** chunk table or in the large chunk hash table. This is
- ** successful most of the time (about 9 times out of 10).
- */
- if( nBlock <= MX_SMALL ){
- i = mem3.aiSmall[nBlock-2];
- if( i>0 ){
- memsys3UnlinkFromList(i, &mem3.aiSmall[nBlock-2]);
- return memsys3Checkout(i, nBlock);
- }
- }else{
- int hash = nBlock % N_HASH;
- for(i=mem3.aiHash[hash]; i>0; i=mem3.aPool[i].u.list.next){
- if( mem3.aPool[i-1].u.hdr.size4x/4==nBlock ){
- memsys3UnlinkFromList(i, &mem3.aiHash[hash]);
- return memsys3Checkout(i, nBlock);
- }
- }
- }
-
- /* STEP 2:
- ** Try to satisfy the allocation by carving a piece off of the end
- ** of the master chunk. This step usually works if step 1 fails.
- */
- if( mem3.szMaster>=nBlock ){
- return memsys3FromMaster(nBlock);
- }
-
-
- /* STEP 3:
- ** Loop through the entire memory pool. Coalesce adjacent free
- ** chunks. Recompute the master chunk as the largest free chunk.
- ** Then try again to satisfy the allocation by carving a piece off
- ** of the end of the master chunk. This step happens very
- ** rarely (we hope!)
- */
- for(toFree=nBlock*16; toFree<(mem3.nPool*16); toFree *= 2){
- memsys3OutOfMemory(toFree);
- if( mem3.iMaster ){
- memsys3Link(mem3.iMaster);
- mem3.iMaster = 0;
- mem3.szMaster = 0;
- }
- for(i=0; i=nBlock ){
- return memsys3FromMaster(nBlock);
- }
- }
- }
-
- /* If none of the above worked, then we fail. */
- return 0;
-}
-
-/*
-** Free an outstanding memory allocation.
-**
-** This function assumes that the necessary mutexes, if any, are
-** already held by the caller. Hence "Unsafe".
-*/
-static void memsys3FreeUnsafe(void *pOld){
- Mem3Block *p = (Mem3Block*)pOld;
- int i;
- u32 size, x;
- assert( sqlite3_mutex_held(mem3.mutex) );
- assert( p>mem3.aPool && p<&mem3.aPool[mem3.nPool] );
- i = p - mem3.aPool;
- assert( (mem3.aPool[i-1].u.hdr.size4x&1)==1 );
- size = mem3.aPool[i-1].u.hdr.size4x/4;
- assert( i+size<=mem3.nPool+1 );
- mem3.aPool[i-1].u.hdr.size4x &= ~1;
- mem3.aPool[i+size-1].u.hdr.prevSize = size;
- mem3.aPool[i+size-1].u.hdr.size4x &= ~2;
- memsys3Link(i);
-
- /* Try to expand the master using the newly freed chunk */
- if( mem3.iMaster ){
- while( (mem3.aPool[mem3.iMaster-1].u.hdr.size4x&2)==0 ){
- size = mem3.aPool[mem3.iMaster-1].u.hdr.prevSize;
- mem3.iMaster -= size;
- mem3.szMaster += size;
- memsys3Unlink(mem3.iMaster);
- x = mem3.aPool[mem3.iMaster-1].u.hdr.size4x & 2;
- mem3.aPool[mem3.iMaster-1].u.hdr.size4x = mem3.szMaster*4 | x;
- mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.prevSize = mem3.szMaster;
- }
- x = mem3.aPool[mem3.iMaster-1].u.hdr.size4x & 2;
- while( (mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.size4x&1)==0 ){
- memsys3Unlink(mem3.iMaster+mem3.szMaster);
- mem3.szMaster += mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.size4x/4;
- mem3.aPool[mem3.iMaster-1].u.hdr.size4x = mem3.szMaster*4 | x;
- mem3.aPool[mem3.iMaster+mem3.szMaster-1].u.hdr.prevSize = mem3.szMaster;
- }
- }
-}
-
-/*
-** Return the size of an outstanding allocation, in bytes. The
-** size returned omits the 8-byte header overhead. This only
-** works for chunks that are currently checked out.
-*/
-static int memsys3Size(void *p){
- Mem3Block *pBlock;
- assert( p!=0 );
- pBlock = (Mem3Block*)p;
- assert( (pBlock[-1].u.hdr.size4x&1)!=0 );
- return (pBlock[-1].u.hdr.size4x&~3)*2 - 4;
-}
-
-/*
-** Round up a request size to the next valid allocation size.
-*/
-static int memsys3Roundup(int n){
- if( n<=12 ){
- return 12;
- }else{
- return ((n+11)&~7) - 4;
- }
-}
-
-/*
-** Allocate nBytes of memory.
-*/
-static void *memsys3Malloc(int nBytes){
- sqlite3_int64 *p;
- assert( nBytes>0 ); /* malloc.c filters out 0 byte requests */
- memsys3Enter();
- p = memsys3MallocUnsafe(nBytes);
- memsys3Leave();
- return (void*)p;
-}
-
-/*
-** Free memory.
-*/
-static void memsys3Free(void *pPrior){
- assert( pPrior );
- memsys3Enter();
- memsys3FreeUnsafe(pPrior);
- memsys3Leave();
-}
-
-/*
-** Change the size of an existing memory allocation
-*/
-static void *memsys3Realloc(void *pPrior, int nBytes){
- int nOld;
- void *p;
- if( pPrior==0 ){
- return sqlite3_malloc(nBytes);
- }
- if( nBytes<=0 ){
- sqlite3_free(pPrior);
- return 0;
- }
- nOld = memsys3Size(pPrior);
- if( nBytes<=nOld && nBytes>=nOld-128 ){
- return pPrior;
- }
- memsys3Enter();
- p = memsys3MallocUnsafe(nBytes);
- if( p ){
- if( nOld>1)!=(size&1) ){
- fprintf(out, "%p tail checkout bit is incorrect\n", &mem3.aPool[i]);
- assert( 0 );
- break;
- }
- if( size&1 ){
- fprintf(out, "%p %6d bytes checked out\n", &mem3.aPool[i], (size/4)*8-8);
- }else{
- fprintf(out, "%p %6d bytes free%s\n", &mem3.aPool[i], (size/4)*8-8,
- i==mem3.iMaster ? " **master**" : "");
- }
- }
- for(i=0; i0; j=mem3.aPool[j].u.list.next){
- fprintf(out, " %p(%d)", &mem3.aPool[j],
- (mem3.aPool[j-1].u.hdr.size4x/4)*8-8);
- }
- fprintf(out, "\n");
- }
- for(i=0; i0; j=mem3.aPool[j].u.list.next){
- fprintf(out, " %p(%d)", &mem3.aPool[j],
- (mem3.aPool[j-1].u.hdr.size4x/4)*8-8);
- }
- fprintf(out, "\n");
- }
- fprintf(out, "master=%d\n", mem3.iMaster);
- fprintf(out, "nowUsed=%d\n", mem3.nPool*8 - mem3.szMaster*8);
- fprintf(out, "mxUsed=%d\n", mem3.nPool*8 - mem3.mnMaster*8);
- sqlite3_mutex_leave(mem3.mutex);
- if( out==stdout ){
- fflush(stdout);
- }else{
- fclose(out);
- }
-#else
- UNUSED_PARAMETER(zFilename);
-#endif
-}
-
-/*
-** This routine is the only routine in this file with external
-** linkage.
-**
-** Populate the low-level memory allocation function pointers in
-** sqlite3GlobalConfig.m with pointers to the routines in this file. The
-** arguments specify the block of memory to manage.
-**
-** This routine is only called by sqlite3_config(), and therefore
-** is not required to be threadsafe (it is not).
-*/
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys3(void){
- static const sqlite3_mem_methods mempoolMethods = {
- memsys3Malloc,
- memsys3Free,
- memsys3Realloc,
- memsys3Size,
- memsys3Roundup,
- memsys3Init,
- memsys3Shutdown,
- 0
- };
- return &mempoolMethods;
-}
-
-#endif /* SQLITE_ENABLE_MEMSYS3 */
-
-/************** End of mem3.c ************************************************/
-/************** Begin file mem5.c ********************************************/
-/*
-** 2007 October 14
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement a memory
-** allocation subsystem for use by SQLite.
-**
-** This version of the memory allocation subsystem omits all
-** use of malloc(). The application gives SQLite a block of memory
-** before calling sqlite3_initialize() from which allocations
-** are made and returned by the xMalloc() and xRealloc()
-** implementations. Once sqlite3_initialize() has been called,
-** the amount of memory available to SQLite is fixed and cannot
-** be changed.
-**
-** This version of the memory allocation subsystem is included
-** in the build only if SQLITE_ENABLE_MEMSYS5 is defined.
-**
-** This memory allocator uses the following algorithm:
-**
-** 1. All memory allocation sizes are rounded up to a power of 2.
-**
-** 2. If two adjacent free blocks are the halves of a larger block,
-** then the two blocks are coalesced into the single larger block.
-**
-** 3. New memory is allocated from the first available free block.
-**
-** This algorithm is described in: J. M. Robson. "Bounds for Some Functions
-** Concerning Dynamic Storage Allocation". Journal of the Association for
-** Computing Machinery, Volume 21, Number 8, July 1974, pages 491-499.
-**
-** Let n be the size of the largest allocation divided by the minimum
-** allocation size (after rounding all sizes up to a power of 2.) Let M
-** be the maximum amount of memory ever outstanding at one time. Let
-** N be the total amount of memory available for allocation. Robson
-** proved that this memory allocator will never breakdown due to
-** fragmentation as long as the following constraint holds:
-**
-** N >= M*(1 + log2(n)/2) - n + 1
-**
-** The sqlite3_status() logic tracks the maximum values of n and M so
-** that an application can, at any time, verify this constraint.
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** This version of the memory allocator is used only when
-** SQLITE_ENABLE_MEMSYS5 is defined.
-*/
-#ifdef SQLITE_ENABLE_MEMSYS5
-
-/*
-** A minimum allocation is an instance of the following structure.
-** Larger allocations are an array of these structures where the
-** size of the array is a power of 2.
-**
-** The size of this object must be a power of two. That fact is
-** verified in memsys5Init().
-*/
-typedef struct Mem5Link Mem5Link;
-struct Mem5Link {
- int next; /* Index of next free chunk */
- int prev; /* Index of previous free chunk */
-};
-
-/*
-** Maximum size of any allocation is ((1<=0 && i=0 && iLogsize<=LOGMAX );
- assert( (mem5.aCtrl[i] & CTRL_LOGSIZE)==iLogsize );
-
- next = MEM5LINK(i)->next;
- prev = MEM5LINK(i)->prev;
- if( prev<0 ){
- mem5.aiFreelist[iLogsize] = next;
- }else{
- MEM5LINK(prev)->next = next;
- }
- if( next>=0 ){
- MEM5LINK(next)->prev = prev;
- }
-}
-
-/*
-** Link the chunk at mem5.aPool[i] so that is on the iLogsize
-** free list.
-*/
-static void memsys5Link(int i, int iLogsize){
- int x;
- assert( sqlite3_mutex_held(mem5.mutex) );
- assert( i>=0 && i=0 && iLogsize<=LOGMAX );
- assert( (mem5.aCtrl[i] & CTRL_LOGSIZE)==iLogsize );
-
- x = MEM5LINK(i)->next = mem5.aiFreelist[iLogsize];
- MEM5LINK(i)->prev = -1;
- if( x>=0 ){
- assert( xprev = i;
- }
- mem5.aiFreelist[iLogsize] = i;
-}
-
-/*
-** Obtain or release the mutex needed to access global data structures.
-*/
-static void memsys5Enter(void){
- sqlite3_mutex_enter(mem5.mutex);
-}
-static void memsys5Leave(void){
- sqlite3_mutex_leave(mem5.mutex);
-}
-
-/*
-** Return the size of an outstanding allocation, in bytes.
-** This only works for chunks that are currently checked out.
-*/
-static int memsys5Size(void *p){
- int iSize, i;
- assert( p!=0 );
- i = (int)(((u8 *)p-mem5.zPool)/mem5.szAtom);
- assert( i>=0 && i0 );
-
- /* No more than 1GiB per allocation */
- if( nByte > 0x40000000 ) return 0;
-
-#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- /* Keep track of the maximum allocation request. Even unfulfilled
- ** requests are counted */
- if( (u32)nByte>mem5.maxRequest ){
- mem5.maxRequest = nByte;
- }
-#endif
-
-
- /* Round nByte up to the next valid power of two */
- for(iFullSz=mem5.szAtom,iLogsize=0; iFullSzLOGMAX ){
- testcase( sqlite3GlobalConfig.xLog!=0 );
- sqlite3_log(SQLITE_NOMEM, "failed to allocate %u bytes", nByte);
- return 0;
- }
- i = mem5.aiFreelist[iBin];
- memsys5Unlink(i, iBin);
- while( iBin>iLogsize ){
- int newSize;
-
- iBin--;
- newSize = 1 << iBin;
- mem5.aCtrl[i+newSize] = CTRL_FREE | iBin;
- memsys5Link(i+newSize, iBin);
- }
- mem5.aCtrl[i] = iLogsize;
-
-#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- /* Update allocator performance statistics. */
- mem5.nAlloc++;
- mem5.totalAlloc += iFullSz;
- mem5.totalExcess += iFullSz - nByte;
- mem5.currentCount++;
- mem5.currentOut += iFullSz;
- if( mem5.maxCount=0 && iBlock0 );
- assert( mem5.currentOut>=(size*mem5.szAtom) );
- mem5.currentCount--;
- mem5.currentOut -= size*mem5.szAtom;
- assert( mem5.currentOut>0 || mem5.currentCount==0 );
- assert( mem5.currentCount>0 || mem5.currentOut==0 );
-#endif
-
- mem5.aCtrl[iBlock] = CTRL_FREE | iLogsize;
- while( ALWAYS(iLogsize>iLogsize) & 1 ){
- iBuddy = iBlock - size;
- assert( iBuddy>=0 );
- }else{
- iBuddy = iBlock + size;
- if( iBuddy>=mem5.nBlock ) break;
- }
- if( mem5.aCtrl[iBuddy]!=(CTRL_FREE | iLogsize) ) break;
- memsys5Unlink(iBuddy, iLogsize);
- iLogsize++;
- if( iBuddy0 ){
- memsys5Enter();
- p = memsys5MallocUnsafe(nBytes);
- memsys5Leave();
- }
- return (void*)p;
-}
-
-/*
-** Free memory.
-**
-** The outer layer memory allocator prevents this routine from
-** being called with pPrior==0.
-*/
-static void memsys5Free(void *pPrior){
- assert( pPrior!=0 );
- memsys5Enter();
- memsys5FreeUnsafe(pPrior);
- memsys5Leave();
-}
-
-/*
-** Change the size of an existing memory allocation.
-**
-** The outer layer memory allocator prevents this routine from
-** being called with pPrior==0.
-**
-** nBytes is always a value obtained from a prior call to
-** memsys5Round(). Hence nBytes is always a non-negative power
-** of two. If nBytes==0 that means that an oversize allocation
-** (an allocation larger than 0x40000000) was requested and this
-** routine should return 0 without freeing pPrior.
-*/
-static void *memsys5Realloc(void *pPrior, int nBytes){
- int nOld;
- void *p;
- assert( pPrior!=0 );
- assert( (nBytes&(nBytes-1))==0 ); /* EV: R-46199-30249 */
- assert( nBytes>=0 );
- if( nBytes==0 ){
- return 0;
- }
- nOld = memsys5Size(pPrior);
- if( nBytes<=nOld ){
- return pPrior;
- }
- p = memsys5Malloc(nBytes);
- if( p ){
- memcpy(p, pPrior, nOld);
- memsys5Free(pPrior);
- }
- return p;
-}
-
-/*
-** Round up a request size to the next valid allocation size. If
-** the allocation is too large to be handled by this allocation system,
-** return 0.
-**
-** All allocations must be a power of two and must be expressed by a
-** 32-bit signed integer. Hence the largest allocation is 0x40000000
-** or 1073741824 bytes.
-*/
-static int memsys5Roundup(int n){
- int iFullSz;
- if( n > 0x40000000 ) return 0;
- for(iFullSz=mem5.szAtom; iFullSz 0
-** memsys5Log(2) -> 1
-** memsys5Log(4) -> 2
-** memsys5Log(5) -> 3
-** memsys5Log(8) -> 3
-** memsys5Log(9) -> 4
-*/
-static int memsys5Log(int iValue){
- int iLog;
- for(iLog=0; (iLog<(int)((sizeof(int)*8)-1)) && (1<mem5.szAtom ){
- mem5.szAtom = mem5.szAtom << 1;
- }
-
- mem5.nBlock = (nByte / (mem5.szAtom+sizeof(u8)));
- mem5.zPool = zByte;
- mem5.aCtrl = (u8 *)&mem5.zPool[mem5.nBlock*mem5.szAtom];
-
- for(ii=0; ii<=LOGMAX; ii++){
- mem5.aiFreelist[ii] = -1;
- }
-
- iOffset = 0;
- for(ii=LOGMAX; ii>=0; ii--){
- int nAlloc = (1<mem5.nBlock);
- }
-
- /* If a mutex is required for normal operation, allocate one */
- if( sqlite3GlobalConfig.bMemstat==0 ){
- mem5.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
- }
-
- return SQLITE_OK;
-}
-
-/*
-** Deinitialize this module.
-*/
-static void memsys5Shutdown(void *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- mem5.mutex = 0;
- return;
-}
-
-#ifdef SQLITE_TEST
-/*
-** Open the file indicated and write a log of all unfreed memory
-** allocations into that log.
-*/
-SQLITE_PRIVATE void sqlite3Memsys5Dump(const char *zFilename){
- FILE *out;
- int i, j, n;
- int nMinLog;
-
- if( zFilename==0 || zFilename[0]==0 ){
- out = stdout;
- }else{
- out = fopen(zFilename, "w");
- if( out==0 ){
- fprintf(stderr, "** Unable to output memory debug output log: %s **\n",
- zFilename);
- return;
- }
- }
- memsys5Enter();
- nMinLog = memsys5Log(mem5.szAtom);
- for(i=0; i<=LOGMAX && i+nMinLog<32; i++){
- for(n=0, j=mem5.aiFreelist[i]; j>=0; j = MEM5LINK(j)->next, n++){}
- fprintf(out, "freelist items of size %d: %d\n", mem5.szAtom << i, n);
- }
- fprintf(out, "mem5.nAlloc = %llu\n", mem5.nAlloc);
- fprintf(out, "mem5.totalAlloc = %llu\n", mem5.totalAlloc);
- fprintf(out, "mem5.totalExcess = %llu\n", mem5.totalExcess);
- fprintf(out, "mem5.currentOut = %u\n", mem5.currentOut);
- fprintf(out, "mem5.currentCount = %u\n", mem5.currentCount);
- fprintf(out, "mem5.maxOut = %u\n", mem5.maxOut);
- fprintf(out, "mem5.maxCount = %u\n", mem5.maxCount);
- fprintf(out, "mem5.maxRequest = %u\n", mem5.maxRequest);
- memsys5Leave();
- if( out==stdout ){
- fflush(stdout);
- }else{
- fclose(out);
- }
-}
-#endif
-
-/*
-** This routine is the only routine in this file with external
-** linkage. It returns a pointer to a static sqlite3_mem_methods
-** struct populated with the memsys5 methods.
-*/
-SQLITE_PRIVATE const sqlite3_mem_methods *sqlite3MemGetMemsys5(void){
- static const sqlite3_mem_methods memsys5Methods = {
- memsys5Malloc,
- memsys5Free,
- memsys5Realloc,
- memsys5Size,
- memsys5Roundup,
- memsys5Init,
- memsys5Shutdown,
- 0
- };
- return &memsys5Methods;
-}
-
-#endif /* SQLITE_ENABLE_MEMSYS5 */
-
-/************** End of mem5.c ************************************************/
-/************** Begin file mutex.c *******************************************/
-/*
-** 2007 August 14
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement mutexes.
-**
-** This file contains code that is common across all mutex implementations.
-*/
-/* #include "sqliteInt.h" */
-
-#if defined(SQLITE_DEBUG) && !defined(SQLITE_MUTEX_OMIT)
-/*
-** For debugging purposes, record when the mutex subsystem is initialized
-** and uninitialized so that we can assert() if there is an attempt to
-** allocate a mutex while the system is uninitialized.
-*/
-static SQLITE_WSD int mutexIsInit = 0;
-#endif /* SQLITE_DEBUG && !defined(SQLITE_MUTEX_OMIT) */
-
-
-#ifndef SQLITE_MUTEX_OMIT
-/*
-** Initialize the mutex system.
-*/
-SQLITE_PRIVATE int sqlite3MutexInit(void){
- int rc = SQLITE_OK;
- if( !sqlite3GlobalConfig.mutex.xMutexAlloc ){
- /* If the xMutexAlloc method has not been set, then the user did not
- ** install a mutex implementation via sqlite3_config() prior to
- ** sqlite3_initialize() being called. This block copies pointers to
- ** the default implementation into the sqlite3GlobalConfig structure.
- */
- sqlite3_mutex_methods const *pFrom;
- sqlite3_mutex_methods *pTo = &sqlite3GlobalConfig.mutex;
-
- if( sqlite3GlobalConfig.bCoreMutex ){
- pFrom = sqlite3DefaultMutex();
- }else{
- pFrom = sqlite3NoopMutex();
- }
- pTo->xMutexInit = pFrom->xMutexInit;
- pTo->xMutexEnd = pFrom->xMutexEnd;
- pTo->xMutexFree = pFrom->xMutexFree;
- pTo->xMutexEnter = pFrom->xMutexEnter;
- pTo->xMutexTry = pFrom->xMutexTry;
- pTo->xMutexLeave = pFrom->xMutexLeave;
- pTo->xMutexHeld = pFrom->xMutexHeld;
- pTo->xMutexNotheld = pFrom->xMutexNotheld;
- sqlite3MemoryBarrier();
- pTo->xMutexAlloc = pFrom->xMutexAlloc;
- }
- assert( sqlite3GlobalConfig.mutex.xMutexInit );
- rc = sqlite3GlobalConfig.mutex.xMutexInit();
-
-#ifdef SQLITE_DEBUG
- GLOBAL(int, mutexIsInit) = 1;
-#endif
-
- return rc;
-}
-
-/*
-** Shutdown the mutex system. This call frees resources allocated by
-** sqlite3MutexInit().
-*/
-SQLITE_PRIVATE int sqlite3MutexEnd(void){
- int rc = SQLITE_OK;
- if( sqlite3GlobalConfig.mutex.xMutexEnd ){
- rc = sqlite3GlobalConfig.mutex.xMutexEnd();
- }
-
-#ifdef SQLITE_DEBUG
- GLOBAL(int, mutexIsInit) = 0;
-#endif
-
- return rc;
-}
-
-/*
-** Retrieve a pointer to a static mutex or allocate a new dynamic one.
-*/
-SQLITE_API sqlite3_mutex *SQLITE_STDCALL sqlite3_mutex_alloc(int id){
-#ifndef SQLITE_OMIT_AUTOINIT
- if( id<=SQLITE_MUTEX_RECURSIVE && sqlite3_initialize() ) return 0;
- if( id>SQLITE_MUTEX_RECURSIVE && sqlite3MutexInit() ) return 0;
-#endif
- assert( sqlite3GlobalConfig.mutex.xMutexAlloc );
- return sqlite3GlobalConfig.mutex.xMutexAlloc(id);
-}
-
-SQLITE_PRIVATE sqlite3_mutex *sqlite3MutexAlloc(int id){
- if( !sqlite3GlobalConfig.bCoreMutex ){
- return 0;
- }
- assert( GLOBAL(int, mutexIsInit) );
- assert( sqlite3GlobalConfig.mutex.xMutexAlloc );
- return sqlite3GlobalConfig.mutex.xMutexAlloc(id);
-}
-
-/*
-** Free a dynamic mutex.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_free(sqlite3_mutex *p){
- if( p ){
- assert( sqlite3GlobalConfig.mutex.xMutexFree );
- sqlite3GlobalConfig.mutex.xMutexFree(p);
- }
-}
-
-/*
-** Obtain the mutex p. If some other thread already has the mutex, block
-** until it can be obtained.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_enter(sqlite3_mutex *p){
- if( p ){
- assert( sqlite3GlobalConfig.mutex.xMutexEnter );
- sqlite3GlobalConfig.mutex.xMutexEnter(p);
- }
-}
-
-/*
-** Obtain the mutex p. If successful, return SQLITE_OK. Otherwise, if another
-** thread holds the mutex and it cannot be obtained, return SQLITE_BUSY.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_try(sqlite3_mutex *p){
- int rc = SQLITE_OK;
- if( p ){
- assert( sqlite3GlobalConfig.mutex.xMutexTry );
- return sqlite3GlobalConfig.mutex.xMutexTry(p);
- }
- return rc;
-}
-
-/*
-** The sqlite3_mutex_leave() routine exits a mutex that was previously
-** entered by the same thread. The behavior is undefined if the mutex
-** is not currently entered. If a NULL pointer is passed as an argument
-** this function is a no-op.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_mutex_leave(sqlite3_mutex *p){
- if( p ){
- assert( sqlite3GlobalConfig.mutex.xMutexLeave );
- sqlite3GlobalConfig.mutex.xMutexLeave(p);
- }
-}
-
-#ifndef NDEBUG
-/*
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
-** intended for use inside assert() statements.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_held(sqlite3_mutex *p){
- assert( p==0 || sqlite3GlobalConfig.mutex.xMutexHeld );
- return p==0 || sqlite3GlobalConfig.mutex.xMutexHeld(p);
-}
-SQLITE_API int SQLITE_STDCALL sqlite3_mutex_notheld(sqlite3_mutex *p){
- assert( p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld );
- return p==0 || sqlite3GlobalConfig.mutex.xMutexNotheld(p);
-}
-#endif
-
-#endif /* !defined(SQLITE_MUTEX_OMIT) */
-
-/************** End of mutex.c ***********************************************/
-/************** Begin file mutex_noop.c **************************************/
-/*
-** 2008 October 07
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement mutexes.
-**
-** This implementation in this file does not provide any mutual
-** exclusion and is thus suitable for use only in applications
-** that use SQLite in a single thread. The routines defined
-** here are place-holders. Applications can substitute working
-** mutex routines at start-time using the
-**
-** sqlite3_config(SQLITE_CONFIG_MUTEX,...)
-**
-** interface.
-**
-** If compiled with SQLITE_DEBUG, then additional logic is inserted
-** that does error checking on mutexes to make sure they are being
-** called correctly.
-*/
-/* #include "sqliteInt.h" */
-
-#ifndef SQLITE_MUTEX_OMIT
-
-#ifndef SQLITE_DEBUG
-/*
-** Stub routines for all mutex methods.
-**
-** This routines provide no mutual exclusion or error checking.
-*/
-static int noopMutexInit(void){ return SQLITE_OK; }
-static int noopMutexEnd(void){ return SQLITE_OK; }
-static sqlite3_mutex *noopMutexAlloc(int id){
- UNUSED_PARAMETER(id);
- return (sqlite3_mutex*)8;
-}
-static void noopMutexFree(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }
-static void noopMutexEnter(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }
-static int noopMutexTry(sqlite3_mutex *p){
- UNUSED_PARAMETER(p);
- return SQLITE_OK;
-}
-static void noopMutexLeave(sqlite3_mutex *p){ UNUSED_PARAMETER(p); return; }
-
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3NoopMutex(void){
- static const sqlite3_mutex_methods sMutex = {
- noopMutexInit,
- noopMutexEnd,
- noopMutexAlloc,
- noopMutexFree,
- noopMutexEnter,
- noopMutexTry,
- noopMutexLeave,
-
- 0,
- 0,
- };
-
- return &sMutex;
-}
-#endif /* !SQLITE_DEBUG */
-
-#ifdef SQLITE_DEBUG
-/*
-** In this implementation, error checking is provided for testing
-** and debugging purposes. The mutexes still do not provide any
-** mutual exclusion.
-*/
-
-/*
-** The mutex object
-*/
-typedef struct sqlite3_debug_mutex {
- int id; /* The mutex type */
- int cnt; /* Number of entries without a matching leave */
-} sqlite3_debug_mutex;
-
-/*
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
-** intended for use inside assert() statements.
-*/
-static int debugMutexHeld(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- return p==0 || p->cnt>0;
-}
-static int debugMutexNotheld(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- return p==0 || p->cnt==0;
-}
-
-/*
-** Initialize and deinitialize the mutex subsystem.
-*/
-static int debugMutexInit(void){ return SQLITE_OK; }
-static int debugMutexEnd(void){ return SQLITE_OK; }
-
-/*
-** The sqlite3_mutex_alloc() routine allocates a new
-** mutex and returns a pointer to it. If it returns NULL
-** that means that a mutex could not be allocated.
-*/
-static sqlite3_mutex *debugMutexAlloc(int id){
- static sqlite3_debug_mutex aStatic[SQLITE_MUTEX_STATIC_VFS3 - 1];
- sqlite3_debug_mutex *pNew = 0;
- switch( id ){
- case SQLITE_MUTEX_FAST:
- case SQLITE_MUTEX_RECURSIVE: {
- pNew = sqlite3Malloc(sizeof(*pNew));
- if( pNew ){
- pNew->id = id;
- pNew->cnt = 0;
- }
- break;
- }
- default: {
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( id-2<0 || id-2>=ArraySize(aStatic) ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
- pNew = &aStatic[id-2];
- pNew->id = id;
- break;
- }
- }
- return (sqlite3_mutex*)pNew;
-}
-
-/*
-** This routine deallocates a previously allocated mutex.
-*/
-static void debugMutexFree(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- assert( p->cnt==0 );
- if( p->id==SQLITE_MUTEX_RECURSIVE || p->id==SQLITE_MUTEX_FAST ){
- sqlite3_free(p);
- }else{
-#ifdef SQLITE_ENABLE_API_ARMOR
- (void)SQLITE_MISUSE_BKPT;
-#endif
- }
-}
-
-/*
-** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. If another thread is already within the mutex,
-** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. The sqlite3_mutex_try() interface returns SQLITE_OK
-** upon successful entry. Mutexes created using SQLITE_MUTEX_RECURSIVE can
-** be entered multiple times by the same thread. In such cases the,
-** mutex must be exited an equal number of times before another thread
-** can enter. If the same thread tries to enter any other kind of mutex
-** more than once, the behavior is undefined.
-*/
-static void debugMutexEnter(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
- p->cnt++;
-}
-static int debugMutexTry(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
- p->cnt++;
- return SQLITE_OK;
-}
-
-/*
-** The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. The behavior
-** is undefined if the mutex is not currently entered or
-** is not currently allocated. SQLite will never do either.
-*/
-static void debugMutexLeave(sqlite3_mutex *pX){
- sqlite3_debug_mutex *p = (sqlite3_debug_mutex*)pX;
- assert( debugMutexHeld(pX) );
- p->cnt--;
- assert( p->id==SQLITE_MUTEX_RECURSIVE || debugMutexNotheld(pX) );
-}
-
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3NoopMutex(void){
- static const sqlite3_mutex_methods sMutex = {
- debugMutexInit,
- debugMutexEnd,
- debugMutexAlloc,
- debugMutexFree,
- debugMutexEnter,
- debugMutexTry,
- debugMutexLeave,
-
- debugMutexHeld,
- debugMutexNotheld
- };
-
- return &sMutex;
-}
-#endif /* SQLITE_DEBUG */
-
-/*
-** If compiled with SQLITE_MUTEX_NOOP, then the no-op mutex implementation
-** is used regardless of the run-time threadsafety setting.
-*/
-#ifdef SQLITE_MUTEX_NOOP
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
- return sqlite3NoopMutex();
-}
-#endif /* defined(SQLITE_MUTEX_NOOP) */
-#endif /* !defined(SQLITE_MUTEX_OMIT) */
-
-/************** End of mutex_noop.c ******************************************/
-/************** Begin file mutex_unix.c **************************************/
-/*
-** 2007 August 28
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement mutexes for pthreads
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** The code in this file is only used if we are compiling threadsafe
-** under unix with pthreads.
-**
-** Note that this implementation requires a version of pthreads that
-** supports recursive mutexes.
-*/
-#ifdef SQLITE_MUTEX_PTHREADS
-
-#include
-
-/*
-** The sqlite3_mutex.id, sqlite3_mutex.nRef, and sqlite3_mutex.owner fields
-** are necessary under two condidtions: (1) Debug builds and (2) using
-** home-grown mutexes. Encapsulate these conditions into a single #define.
-*/
-#if defined(SQLITE_DEBUG) || defined(SQLITE_HOMEGROWN_RECURSIVE_MUTEX)
-# define SQLITE_MUTEX_NREF 1
-#else
-# define SQLITE_MUTEX_NREF 0
-#endif
-
-/*
-** Each recursive mutex is an instance of the following structure.
-*/
-struct sqlite3_mutex {
- pthread_mutex_t mutex; /* Mutex controlling the lock */
-#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR)
- int id; /* Mutex type */
-#endif
-#if SQLITE_MUTEX_NREF
- volatile int nRef; /* Number of entrances */
- volatile pthread_t owner; /* Thread that is within this mutex */
- int trace; /* True to trace changes */
-#endif
-};
-#if SQLITE_MUTEX_NREF
-#define SQLITE3_MUTEX_INITIALIZER {PTHREAD_MUTEX_INITIALIZER,0,0,(pthread_t)0,0}
-#elif defined(SQLITE_ENABLE_API_ARMOR)
-#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER, 0 }
-#else
-#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER }
-#endif
-
-/*
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
-** intended for use only inside assert() statements. On some platforms,
-** there might be race conditions that can cause these routines to
-** deliver incorrect results. In particular, if pthread_equal() is
-** not an atomic operation, then these routines might delivery
-** incorrect results. On most platforms, pthread_equal() is a
-** comparison of two integers and is therefore atomic. But we are
-** told that HPUX is not such a platform. If so, then these routines
-** will not always work correctly on HPUX.
-**
-** On those platforms where pthread_equal() is not atomic, SQLite
-** should be compiled without -DSQLITE_DEBUG and with -DNDEBUG to
-** make sure no assert() statements are evaluated and hence these
-** routines are never called.
-*/
-#if !defined(NDEBUG) || defined(SQLITE_DEBUG)
-static int pthreadMutexHeld(sqlite3_mutex *p){
- return (p->nRef!=0 && pthread_equal(p->owner, pthread_self()));
-}
-static int pthreadMutexNotheld(sqlite3_mutex *p){
- return p->nRef==0 || pthread_equal(p->owner, pthread_self())==0;
-}
-#endif
-
-/*
-** Try to provide a memory barrier operation, needed for initialization
-** and also for the implementation of xShmBarrier in the VFS in cases
-** where SQLite is compiled without mutexes.
-*/
-SQLITE_PRIVATE void sqlite3MemoryBarrier(void){
-#if defined(SQLITE_MEMORY_BARRIER)
- SQLITE_MEMORY_BARRIER;
-#elif defined(__GNUC__) && GCC_VERSION>=4001000
- __sync_synchronize();
-#endif
-}
-
-/*
-** Initialize and deinitialize the mutex subsystem.
-*/
-static int pthreadMutexInit(void){ return SQLITE_OK; }
-static int pthreadMutexEnd(void){ return SQLITE_OK; }
-
-/*
-** The sqlite3_mutex_alloc() routine allocates a new
-** mutex and returns a pointer to it. If it returns NULL
-** that means that a mutex could not be allocated. SQLite
-** will unwind its stack and return an error. The argument
-** to sqlite3_mutex_alloc() is one of these integer constants:
-**
-**
-** - SQLITE_MUTEX_FAST
-**
- SQLITE_MUTEX_RECURSIVE
-**
- SQLITE_MUTEX_STATIC_MASTER
-**
- SQLITE_MUTEX_STATIC_MEM
-**
- SQLITE_MUTEX_STATIC_OPEN
-**
- SQLITE_MUTEX_STATIC_PRNG
-**
- SQLITE_MUTEX_STATIC_LRU
-**
- SQLITE_MUTEX_STATIC_PMEM
-**
- SQLITE_MUTEX_STATIC_APP1
-**
- SQLITE_MUTEX_STATIC_APP2
-**
- SQLITE_MUTEX_STATIC_APP3
-**
- SQLITE_MUTEX_STATIC_VFS1
-**
- SQLITE_MUTEX_STATIC_VFS2
-**
- SQLITE_MUTEX_STATIC_VFS3
-**
-**
-** The first two constants cause sqlite3_mutex_alloc() to create
-** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
-** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
-** The mutex implementation does not need to make a distinction
-** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
-** not want to. But SQLite will only request a recursive mutex in
-** cases where it really needs one. If a faster non-recursive mutex
-** implementation is available on the host platform, the mutex subsystem
-** might return such a mutex in response to SQLITE_MUTEX_FAST.
-**
-** The other allowed parameters to sqlite3_mutex_alloc() each return
-** a pointer to a static preexisting mutex. Six static mutexes are
-** used by the current version of SQLite. Future versions of SQLite
-** may add additional static mutexes. Static mutexes are for internal
-** use by SQLite only. Applications that use SQLite mutexes should
-** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
-** SQLITE_MUTEX_RECURSIVE.
-**
-** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
-** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call. But for the static
-** mutex types, the same mutex is returned on every call that has
-** the same type number.
-*/
-static sqlite3_mutex *pthreadMutexAlloc(int iType){
- static sqlite3_mutex staticMutexes[] = {
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER
- };
- sqlite3_mutex *p;
- switch( iType ){
- case SQLITE_MUTEX_RECURSIVE: {
- p = sqlite3MallocZero( sizeof(*p) );
- if( p ){
-#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- /* If recursive mutexes are not available, we will have to
- ** build our own. See below. */
- pthread_mutex_init(&p->mutex, 0);
-#else
- /* Use a recursive mutex if it is available */
- pthread_mutexattr_t recursiveAttr;
- pthread_mutexattr_init(&recursiveAttr);
- pthread_mutexattr_settype(&recursiveAttr, PTHREAD_MUTEX_RECURSIVE);
- pthread_mutex_init(&p->mutex, &recursiveAttr);
- pthread_mutexattr_destroy(&recursiveAttr);
-#endif
- }
- break;
- }
- case SQLITE_MUTEX_FAST: {
- p = sqlite3MallocZero( sizeof(*p) );
- if( p ){
- pthread_mutex_init(&p->mutex, 0);
- }
- break;
- }
- default: {
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( iType-2<0 || iType-2>=ArraySize(staticMutexes) ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
- p = &staticMutexes[iType-2];
- break;
- }
- }
-#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR)
- if( p ) p->id = iType;
-#endif
- return p;
-}
-
-
-/*
-** This routine deallocates a previously
-** allocated mutex. SQLite is careful to deallocate every
-** mutex that it allocates.
-*/
-static void pthreadMutexFree(sqlite3_mutex *p){
- assert( p->nRef==0 );
-#if SQLITE_ENABLE_API_ARMOR
- if( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE )
-#endif
- {
- pthread_mutex_destroy(&p->mutex);
- sqlite3_free(p);
- }
-#ifdef SQLITE_ENABLE_API_ARMOR
- else{
- (void)SQLITE_MISUSE_BKPT;
- }
-#endif
-}
-
-/*
-** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. If another thread is already within the mutex,
-** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. The sqlite3_mutex_try() interface returns SQLITE_OK
-** upon successful entry. Mutexes created using SQLITE_MUTEX_RECURSIVE can
-** be entered multiple times by the same thread. In such cases the,
-** mutex must be exited an equal number of times before another thread
-** can enter. If the same thread tries to enter any other kind of mutex
-** more than once, the behavior is undefined.
-*/
-static void pthreadMutexEnter(sqlite3_mutex *p){
- assert( p->id==SQLITE_MUTEX_RECURSIVE || pthreadMutexNotheld(p) );
-
-#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- /* If recursive mutexes are not available, then we have to grow
- ** our own. This implementation assumes that pthread_equal()
- ** is atomic - that it cannot be deceived into thinking self
- ** and p->owner are equal if p->owner changes between two values
- ** that are not equal to self while the comparison is taking place.
- ** This implementation also assumes a coherent cache - that
- ** separate processes cannot read different values from the same
- ** address at the same time. If either of these two conditions
- ** are not met, then the mutexes will fail and problems will result.
- */
- {
- pthread_t self = pthread_self();
- if( p->nRef>0 && pthread_equal(p->owner, self) ){
- p->nRef++;
- }else{
- pthread_mutex_lock(&p->mutex);
- assert( p->nRef==0 );
- p->owner = self;
- p->nRef = 1;
- }
- }
-#else
- /* Use the built-in recursive mutexes if they are available.
- */
- pthread_mutex_lock(&p->mutex);
-#if SQLITE_MUTEX_NREF
- assert( p->nRef>0 || p->owner==0 );
- p->owner = pthread_self();
- p->nRef++;
-#endif
-#endif
-
-#ifdef SQLITE_DEBUG
- if( p->trace ){
- printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
- }
-#endif
-}
-static int pthreadMutexTry(sqlite3_mutex *p){
- int rc;
- assert( p->id==SQLITE_MUTEX_RECURSIVE || pthreadMutexNotheld(p) );
-
-#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- /* If recursive mutexes are not available, then we have to grow
- ** our own. This implementation assumes that pthread_equal()
- ** is atomic - that it cannot be deceived into thinking self
- ** and p->owner are equal if p->owner changes between two values
- ** that are not equal to self while the comparison is taking place.
- ** This implementation also assumes a coherent cache - that
- ** separate processes cannot read different values from the same
- ** address at the same time. If either of these two conditions
- ** are not met, then the mutexes will fail and problems will result.
- */
- {
- pthread_t self = pthread_self();
- if( p->nRef>0 && pthread_equal(p->owner, self) ){
- p->nRef++;
- rc = SQLITE_OK;
- }else if( pthread_mutex_trylock(&p->mutex)==0 ){
- assert( p->nRef==0 );
- p->owner = self;
- p->nRef = 1;
- rc = SQLITE_OK;
- }else{
- rc = SQLITE_BUSY;
- }
- }
-#else
- /* Use the built-in recursive mutexes if they are available.
- */
- if( pthread_mutex_trylock(&p->mutex)==0 ){
-#if SQLITE_MUTEX_NREF
- p->owner = pthread_self();
- p->nRef++;
-#endif
- rc = SQLITE_OK;
- }else{
- rc = SQLITE_BUSY;
- }
-#endif
-
-#ifdef SQLITE_DEBUG
- if( rc==SQLITE_OK && p->trace ){
- printf("enter mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
- }
-#endif
- return rc;
-}
-
-/*
-** The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. The behavior
-** is undefined if the mutex is not currently entered or
-** is not currently allocated. SQLite will never do either.
-*/
-static void pthreadMutexLeave(sqlite3_mutex *p){
- assert( pthreadMutexHeld(p) );
-#if SQLITE_MUTEX_NREF
- p->nRef--;
- if( p->nRef==0 ) p->owner = 0;
-#endif
- assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
-
-#ifdef SQLITE_HOMEGROWN_RECURSIVE_MUTEX
- if( p->nRef==0 ){
- pthread_mutex_unlock(&p->mutex);
- }
-#else
- pthread_mutex_unlock(&p->mutex);
-#endif
-
-#ifdef SQLITE_DEBUG
- if( p->trace ){
- printf("leave mutex %p (%d) with nRef=%d\n", p, p->trace, p->nRef);
- }
-#endif
-}
-
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
- static const sqlite3_mutex_methods sMutex = {
- pthreadMutexInit,
- pthreadMutexEnd,
- pthreadMutexAlloc,
- pthreadMutexFree,
- pthreadMutexEnter,
- pthreadMutexTry,
- pthreadMutexLeave,
-#ifdef SQLITE_DEBUG
- pthreadMutexHeld,
- pthreadMutexNotheld
-#else
- 0,
- 0
-#endif
- };
-
- return &sMutex;
-}
-
-#endif /* SQLITE_MUTEX_PTHREADS */
-
-/************** End of mutex_unix.c ******************************************/
-/************** Begin file mutex_w32.c ***************************************/
-/*
-** 2007 August 14
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains the C functions that implement mutexes for Win32.
-*/
-/* #include "sqliteInt.h" */
-
-#if SQLITE_OS_WIN
-/*
-** Include code that is common to all os_*.c files
-*/
-/************** Include os_common.h in the middle of mutex_w32.c *************/
-/************** Begin file os_common.h ***************************************/
-/*
-** 2004 May 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains macros and a little bit of code that is common to
-** all of the platform-specific files (os_*.c) and is #included into those
-** files.
-**
-** This file should be #included by the os_*.c files only. It is not a
-** general purpose header file.
-*/
-#ifndef _OS_COMMON_H_
-#define _OS_COMMON_H_
-
-/*
-** At least two bugs have slipped in because we changed the MEMORY_DEBUG
-** macro to SQLITE_DEBUG and some older makefiles have not yet made the
-** switch. The following code should catch this problem at compile-time.
-*/
-#ifdef MEMORY_DEBUG
-# error "The MEMORY_DEBUG macro is obsolete. Use SQLITE_DEBUG instead."
-#endif
-
-/*
-** Macros for performance tracing. Normally turned off. Only works
-** on i486 hardware.
-*/
-#ifdef SQLITE_PERFORMANCE_TRACE
-
-/*
-** hwtime.h contains inline assembler code for implementing
-** high-performance timing routines.
-*/
-/************** Include hwtime.h in the middle of os_common.h ****************/
-/************** Begin file hwtime.h ******************************************/
-/*
-** 2008 May 27
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains inline asm code for retrieving "high-performance"
-** counters for x86 class CPUs.
-*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
-
-/*
-** The following routine only works on pentium-class (or newer) processors.
-** It uses the RDTSC opcode to read the cycle count value out of the
-** processor and returns that value. This can be used for high-res
-** profiling.
-*/
-#if (defined(__GNUC__) || defined(_MSC_VER)) && \
- (defined(i386) || defined(__i386__) || defined(_M_IX86))
-
- #if defined(__GNUC__)
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned int lo, hi;
- __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
- return (sqlite_uint64)hi << 32 | lo;
- }
-
- #elif defined(_MSC_VER)
-
- __declspec(naked) __inline sqlite_uint64 __cdecl sqlite3Hwtime(void){
- __asm {
- rdtsc
- ret ; return value at EDX:EAX
- }
- }
-
- #endif
-
-#elif (defined(__GNUC__) && defined(__x86_64__))
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned long val;
- __asm__ __volatile__ ("rdtsc" : "=A" (val));
- return val;
- }
-
-#elif (defined(__GNUC__) && defined(__ppc__))
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned long long retval;
- unsigned long junk;
- __asm__ __volatile__ ("\n\
- 1: mftbu %1\n\
- mftb %L0\n\
- mftbu %0\n\
- cmpw %0,%1\n\
- bne 1b"
- : "=r" (retval), "=r" (junk));
- return retval;
- }
-
-#else
-
- #error Need implementation of sqlite3Hwtime() for your platform.
-
- /*
- ** To compile without implementing sqlite3Hwtime() for your platform,
- ** you can remove the above #error and use the following
- ** stub function. You will lose timing support for many
- ** of the debugging and testing utilities, but it should at
- ** least compile and run.
- */
-SQLITE_PRIVATE sqlite_uint64 sqlite3Hwtime(void){ return ((sqlite_uint64)0); }
-
-#endif
-
-#endif /* !defined(_HWTIME_H_) */
-
-/************** End of hwtime.h **********************************************/
-/************** Continuing where we left off in os_common.h ******************/
-
-static sqlite_uint64 g_start;
-static sqlite_uint64 g_elapsed;
-#define TIMER_START g_start=sqlite3Hwtime()
-#define TIMER_END g_elapsed=sqlite3Hwtime()-g_start
-#define TIMER_ELAPSED g_elapsed
-#else
-#define TIMER_START
-#define TIMER_END
-#define TIMER_ELAPSED ((sqlite_uint64)0)
-#endif
-
-/*
-** If we compile with the SQLITE_TEST macro set, then the following block
-** of code will give us the ability to simulate a disk I/O error. This
-** is used for testing the I/O recovery logic.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API extern int sqlite3_io_error_hit;
-SQLITE_API extern int sqlite3_io_error_hardhit;
-SQLITE_API extern int sqlite3_io_error_pending;
-SQLITE_API extern int sqlite3_io_error_persist;
-SQLITE_API extern int sqlite3_io_error_benign;
-SQLITE_API extern int sqlite3_diskfull_pending;
-SQLITE_API extern int sqlite3_diskfull;
-#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
-#define SimulateIOError(CODE) \
- if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
- || sqlite3_io_error_pending-- == 1 ) \
- { local_ioerr(); CODE; }
-static void local_ioerr(){
- IOTRACE(("IOERR\n"));
- sqlite3_io_error_hit++;
- if( !sqlite3_io_error_benign ) sqlite3_io_error_hardhit++;
-}
-#define SimulateDiskfullError(CODE) \
- if( sqlite3_diskfull_pending ){ \
- if( sqlite3_diskfull_pending == 1 ){ \
- local_ioerr(); \
- sqlite3_diskfull = 1; \
- sqlite3_io_error_hit = 1; \
- CODE; \
- }else{ \
- sqlite3_diskfull_pending--; \
- } \
- }
-#else
-#define SimulateIOErrorBenign(X)
-#define SimulateIOError(A)
-#define SimulateDiskfullError(A)
-#endif /* defined(SQLITE_TEST) */
-
-/*
-** When testing, keep a count of the number of open files.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API extern int sqlite3_open_file_count;
-#define OpenCounter(X) sqlite3_open_file_count+=(X)
-#else
-#define OpenCounter(X)
-#endif /* defined(SQLITE_TEST) */
-
-#endif /* !defined(_OS_COMMON_H_) */
-
-/************** End of os_common.h *******************************************/
-/************** Continuing where we left off in mutex_w32.c ******************/
-
-/*
-** Include the header file for the Windows VFS.
-*/
-/************** Include os_win.h in the middle of mutex_w32.c ****************/
-/************** Begin file os_win.h ******************************************/
-/*
-** 2013 November 25
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains code that is specific to Windows.
-*/
-#ifndef _OS_WIN_H_
-#define _OS_WIN_H_
-
-/*
-** Include the primary Windows SDK header file.
-*/
-#include "windows.h"
-
-#ifdef __CYGWIN__
-# include
-# include /* amalgamator: dontcache */
-#endif
-
-/*
-** Determine if we are dealing with Windows NT.
-**
-** We ought to be able to determine if we are compiling for Windows 9x or
-** Windows NT using the _WIN32_WINNT macro as follows:
-**
-** #if defined(_WIN32_WINNT)
-** # define SQLITE_OS_WINNT 1
-** #else
-** # define SQLITE_OS_WINNT 0
-** #endif
-**
-** However, Visual Studio 2005 does not set _WIN32_WINNT by default, as
-** it ought to, so the above test does not work. We'll just assume that
-** everything is Windows NT unless the programmer explicitly says otherwise
-** by setting SQLITE_OS_WINNT to 0.
-*/
-#if SQLITE_OS_WIN && !defined(SQLITE_OS_WINNT)
-# define SQLITE_OS_WINNT 1
-#endif
-
-/*
-** Determine if we are dealing with Windows CE - which has a much reduced
-** API.
-*/
-#if defined(_WIN32_WCE)
-# define SQLITE_OS_WINCE 1
-#else
-# define SQLITE_OS_WINCE 0
-#endif
-
-/*
-** Determine if we are dealing with WinRT, which provides only a subset of
-** the full Win32 API.
-*/
-#if !defined(SQLITE_OS_WINRT)
-# define SQLITE_OS_WINRT 0
-#endif
-
-/*
-** For WinCE, some API function parameters do not appear to be declared as
-** volatile.
-*/
-#if SQLITE_OS_WINCE
-# define SQLITE_WIN32_VOLATILE
-#else
-# define SQLITE_WIN32_VOLATILE volatile
-#endif
-
-/*
-** For some Windows sub-platforms, the _beginthreadex() / _endthreadex()
-** functions are not available (e.g. those not using MSVC, Cygwin, etc).
-*/
-#if SQLITE_OS_WIN && !SQLITE_OS_WINCE && !SQLITE_OS_WINRT && \
- SQLITE_THREADSAFE>0 && !defined(__CYGWIN__)
-# define SQLITE_OS_WIN_THREADS 1
-#else
-# define SQLITE_OS_WIN_THREADS 0
-#endif
-
-#endif /* _OS_WIN_H_ */
-
-/************** End of os_win.h **********************************************/
-/************** Continuing where we left off in mutex_w32.c ******************/
-#endif
-
-/*
-** The code in this file is only used if we are compiling multithreaded
-** on a Win32 system.
-*/
-#ifdef SQLITE_MUTEX_W32
-
-/*
-** Each recursive mutex is an instance of the following structure.
-*/
-struct sqlite3_mutex {
- CRITICAL_SECTION mutex; /* Mutex controlling the lock */
- int id; /* Mutex type */
-#ifdef SQLITE_DEBUG
- volatile int nRef; /* Number of enterances */
- volatile DWORD owner; /* Thread holding this mutex */
- volatile int trace; /* True to trace changes */
-#endif
-};
-
-/*
-** These are the initializer values used when declaring a "static" mutex
-** on Win32. It should be noted that all mutexes require initialization
-** on the Win32 platform.
-*/
-#define SQLITE_W32_MUTEX_INITIALIZER { 0 }
-
-#ifdef SQLITE_DEBUG
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \
- 0L, (DWORD)0, 0 }
-#else
-#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 }
-#endif
-
-#ifdef SQLITE_DEBUG
-/*
-** The sqlite3_mutex_held() and sqlite3_mutex_notheld() routine are
-** intended for use only inside assert() statements.
-*/
-static int winMutexHeld(sqlite3_mutex *p){
- return p->nRef!=0 && p->owner==GetCurrentThreadId();
-}
-
-static int winMutexNotheld2(sqlite3_mutex *p, DWORD tid){
- return p->nRef==0 || p->owner!=tid;
-}
-
-static int winMutexNotheld(sqlite3_mutex *p){
- DWORD tid = GetCurrentThreadId();
- return winMutexNotheld2(p, tid);
-}
-#endif
-
-/*
-** Try to provide a memory barrier operation, needed for initialization
-** and also for the xShmBarrier method of the VFS in cases when SQLite is
-** compiled without mutexes (SQLITE_THREADSAFE=0).
-*/
-SQLITE_PRIVATE void sqlite3MemoryBarrier(void){
-#if defined(SQLITE_MEMORY_BARRIER)
- SQLITE_MEMORY_BARRIER;
-#elif defined(__GNUC__)
- __sync_synchronize();
-#elif !defined(SQLITE_DISABLE_INTRINSIC) && \
- defined(_MSC_VER) && _MSC_VER>=1300
- _ReadWriteBarrier();
-#elif defined(MemoryBarrier)
- MemoryBarrier();
-#endif
-}
-
-/*
-** Initialize and deinitialize the mutex subsystem.
-*/
-static sqlite3_mutex winMutex_staticMutexes[] = {
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER,
- SQLITE3_MUTEX_INITIALIZER
-};
-
-static int winMutex_isInit = 0;
-static int winMutex_isNt = -1; /* <0 means "need to query" */
-
-/* As the winMutexInit() and winMutexEnd() functions are called as part
-** of the sqlite3_initialize() and sqlite3_shutdown() processing, the
-** "interlocked" magic used here is probably not strictly necessary.
-*/
-static LONG SQLITE_WIN32_VOLATILE winMutex_lock = 0;
-
-SQLITE_API int SQLITE_STDCALL sqlite3_win32_is_nt(void); /* os_win.c */
-SQLITE_API void SQLITE_STDCALL sqlite3_win32_sleep(DWORD milliseconds); /* os_win.c */
-
-static int winMutexInit(void){
- /* The first to increment to 1 does actual initialization */
- if( InterlockedCompareExchange(&winMutex_lock, 1, 0)==0 ){
- int i;
- for(i=0; i
-** SQLITE_MUTEX_FAST
-** SQLITE_MUTEX_RECURSIVE
-** SQLITE_MUTEX_STATIC_MASTER
-** SQLITE_MUTEX_STATIC_MEM
-** SQLITE_MUTEX_STATIC_OPEN
-** SQLITE_MUTEX_STATIC_PRNG
-** SQLITE_MUTEX_STATIC_LRU
-** SQLITE_MUTEX_STATIC_PMEM
-** SQLITE_MUTEX_STATIC_APP1
-** SQLITE_MUTEX_STATIC_APP2
-** SQLITE_MUTEX_STATIC_APP3
-** SQLITE_MUTEX_STATIC_VFS1
-** SQLITE_MUTEX_STATIC_VFS2
-** SQLITE_MUTEX_STATIC_VFS3
-**
-**
-** The first two constants cause sqlite3_mutex_alloc() to create
-** a new mutex. The new mutex is recursive when SQLITE_MUTEX_RECURSIVE
-** is used but not necessarily so when SQLITE_MUTEX_FAST is used.
-** The mutex implementation does not need to make a distinction
-** between SQLITE_MUTEX_RECURSIVE and SQLITE_MUTEX_FAST if it does
-** not want to. But SQLite will only request a recursive mutex in
-** cases where it really needs one. If a faster non-recursive mutex
-** implementation is available on the host platform, the mutex subsystem
-** might return such a mutex in response to SQLITE_MUTEX_FAST.
-**
-** The other allowed parameters to sqlite3_mutex_alloc() each return
-** a pointer to a static preexisting mutex. Six static mutexes are
-** used by the current version of SQLite. Future versions of SQLite
-** may add additional static mutexes. Static mutexes are for internal
-** use by SQLite only. Applications that use SQLite mutexes should
-** use only the dynamic mutexes returned by SQLITE_MUTEX_FAST or
-** SQLITE_MUTEX_RECURSIVE.
-**
-** Note that if one of the dynamic mutex parameters (SQLITE_MUTEX_FAST
-** or SQLITE_MUTEX_RECURSIVE) is used then sqlite3_mutex_alloc()
-** returns a different mutex on every call. But for the static
-** mutex types, the same mutex is returned on every call that has
-** the same type number.
-*/
-static sqlite3_mutex *winMutexAlloc(int iType){
- sqlite3_mutex *p;
-
- switch( iType ){
- case SQLITE_MUTEX_FAST:
- case SQLITE_MUTEX_RECURSIVE: {
- p = sqlite3MallocZero( sizeof(*p) );
- if( p ){
- p->id = iType;
-#ifdef SQLITE_DEBUG
-#ifdef SQLITE_WIN32_MUTEX_TRACE_DYNAMIC
- p->trace = 1;
-#endif
-#endif
-#if SQLITE_OS_WINRT
- InitializeCriticalSectionEx(&p->mutex, 0, 0);
-#else
- InitializeCriticalSection(&p->mutex);
-#endif
- }
- break;
- }
- default: {
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( iType-2<0 || iType-2>=ArraySize(winMutex_staticMutexes) ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
- p = &winMutex_staticMutexes[iType-2];
- p->id = iType;
-#ifdef SQLITE_DEBUG
-#ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC
- p->trace = 1;
-#endif
-#endif
- break;
- }
- }
- return p;
-}
-
-
-/*
-** This routine deallocates a previously
-** allocated mutex. SQLite is careful to deallocate every
-** mutex that it allocates.
-*/
-static void winMutexFree(sqlite3_mutex *p){
- assert( p );
- assert( p->nRef==0 && p->owner==0 );
- if( p->id==SQLITE_MUTEX_FAST || p->id==SQLITE_MUTEX_RECURSIVE ){
- DeleteCriticalSection(&p->mutex);
- sqlite3_free(p);
- }else{
-#ifdef SQLITE_ENABLE_API_ARMOR
- (void)SQLITE_MISUSE_BKPT;
-#endif
- }
-}
-
-/*
-** The sqlite3_mutex_enter() and sqlite3_mutex_try() routines attempt
-** to enter a mutex. If another thread is already within the mutex,
-** sqlite3_mutex_enter() will block and sqlite3_mutex_try() will return
-** SQLITE_BUSY. The sqlite3_mutex_try() interface returns SQLITE_OK
-** upon successful entry. Mutexes created using SQLITE_MUTEX_RECURSIVE can
-** be entered multiple times by the same thread. In such cases the,
-** mutex must be exited an equal number of times before another thread
-** can enter. If the same thread tries to enter any other kind of mutex
-** more than once, the behavior is undefined.
-*/
-static void winMutexEnter(sqlite3_mutex *p){
-#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- DWORD tid = GetCurrentThreadId();
-#endif
-#ifdef SQLITE_DEBUG
- assert( p );
- assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) );
-#else
- assert( p );
-#endif
- assert( winMutex_isInit==1 );
- EnterCriticalSection(&p->mutex);
-#ifdef SQLITE_DEBUG
- assert( p->nRef>0 || p->owner==0 );
- p->owner = tid;
- p->nRef++;
- if( p->trace ){
- OSTRACE(("ENTER-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
- tid, p, p->trace, p->nRef));
- }
-#endif
-}
-
-static int winMutexTry(sqlite3_mutex *p){
-#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- DWORD tid = GetCurrentThreadId();
-#endif
- int rc = SQLITE_BUSY;
- assert( p );
- assert( p->id==SQLITE_MUTEX_RECURSIVE || winMutexNotheld2(p, tid) );
- /*
- ** The sqlite3_mutex_try() routine is very rarely used, and when it
- ** is used it is merely an optimization. So it is OK for it to always
- ** fail.
- **
- ** The TryEnterCriticalSection() interface is only available on WinNT.
- ** And some windows compilers complain if you try to use it without
- ** first doing some #defines that prevent SQLite from building on Win98.
- ** For that reason, we will omit this optimization for now. See
- ** ticket #2685.
- */
-#if defined(_WIN32_WINNT) && _WIN32_WINNT >= 0x0400
- assert( winMutex_isInit==1 );
- assert( winMutex_isNt>=-1 && winMutex_isNt<=1 );
- if( winMutex_isNt<0 ){
- winMutex_isNt = sqlite3_win32_is_nt();
- }
- assert( winMutex_isNt==0 || winMutex_isNt==1 );
- if( winMutex_isNt && TryEnterCriticalSection(&p->mutex) ){
-#ifdef SQLITE_DEBUG
- p->owner = tid;
- p->nRef++;
-#endif
- rc = SQLITE_OK;
- }
-#else
- UNUSED_PARAMETER(p);
-#endif
-#ifdef SQLITE_DEBUG
- if( p->trace ){
- OSTRACE(("TRY-MUTEX tid=%lu, mutex=%p (%d), owner=%lu, nRef=%d, rc=%s\n",
- tid, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc)));
- }
-#endif
- return rc;
-}
-
-/*
-** The sqlite3_mutex_leave() routine exits a mutex that was
-** previously entered by the same thread. The behavior
-** is undefined if the mutex is not currently entered or
-** is not currently allocated. SQLite will never do either.
-*/
-static void winMutexLeave(sqlite3_mutex *p){
-#if defined(SQLITE_DEBUG) || defined(SQLITE_TEST)
- DWORD tid = GetCurrentThreadId();
-#endif
- assert( p );
-#ifdef SQLITE_DEBUG
- assert( p->nRef>0 );
- assert( p->owner==tid );
- p->nRef--;
- if( p->nRef==0 ) p->owner = 0;
- assert( p->nRef==0 || p->id==SQLITE_MUTEX_RECURSIVE );
-#endif
- assert( winMutex_isInit==1 );
- LeaveCriticalSection(&p->mutex);
-#ifdef SQLITE_DEBUG
- if( p->trace ){
- OSTRACE(("LEAVE-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n",
- tid, p, p->trace, p->nRef));
- }
-#endif
-}
-
-SQLITE_PRIVATE sqlite3_mutex_methods const *sqlite3DefaultMutex(void){
- static const sqlite3_mutex_methods sMutex = {
- winMutexInit,
- winMutexEnd,
- winMutexAlloc,
- winMutexFree,
- winMutexEnter,
- winMutexTry,
- winMutexLeave,
-#ifdef SQLITE_DEBUG
- winMutexHeld,
- winMutexNotheld
-#else
- 0,
- 0
-#endif
- };
- return &sMutex;
-}
-
-#endif /* SQLITE_MUTEX_W32 */
-
-/************** End of mutex_w32.c *******************************************/
-/************** Begin file malloc.c ******************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** Memory allocation functions used throughout sqlite.
-*/
-/* #include "sqliteInt.h" */
-/* #include */
-
-/*
-** Attempt to release up to n bytes of non-essential memory currently
-** held by SQLite. An example of non-essential memory is memory used to
-** cache database pages that are not currently in use.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_release_memory(int n){
-#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
- return sqlite3PcacheReleaseMemory(n);
-#else
- /* IMPLEMENTATION-OF: R-34391-24921 The sqlite3_release_memory() routine
- ** is a no-op returning zero if SQLite is not compiled with
- ** SQLITE_ENABLE_MEMORY_MANAGEMENT. */
- UNUSED_PARAMETER(n);
- return 0;
-#endif
-}
-
-/*
-** An instance of the following object records the location of
-** each unused scratch buffer.
-*/
-typedef struct ScratchFreeslot {
- struct ScratchFreeslot *pNext; /* Next unused scratch buffer */
-} ScratchFreeslot;
-
-/*
-** State information local to the memory allocation subsystem.
-*/
-static SQLITE_WSD struct Mem0Global {
- sqlite3_mutex *mutex; /* Mutex to serialize access */
- sqlite3_int64 alarmThreshold; /* The soft heap limit */
-
- /*
- ** Pointers to the end of sqlite3GlobalConfig.pScratch memory
- ** (so that a range test can be used to determine if an allocation
- ** being freed came from pScratch) and a pointer to the list of
- ** unused scratch allocations.
- */
- void *pScratchEnd;
- ScratchFreeslot *pScratchFree;
- u32 nScratchFree;
-
- /*
- ** True if heap is nearly "full" where "full" is defined by the
- ** sqlite3_soft_heap_limit() setting.
- */
- int nearlyFull;
-} mem0 = { 0, 0, 0, 0, 0, 0 };
-
-#define mem0 GLOBAL(struct Mem0Global, mem0)
-
-/*
-** Return the memory allocator mutex. sqlite3_status() needs it.
-*/
-SQLITE_PRIVATE sqlite3_mutex *sqlite3MallocMutex(void){
- return mem0.mutex;
-}
-
-#ifndef SQLITE_OMIT_DEPRECATED
-/*
-** Deprecated external interface. It used to set an alarm callback
-** that was invoked when memory usage grew too large. Now it is a
-** no-op.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_memory_alarm(
- void(*xCallback)(void *pArg, sqlite3_int64 used,int N),
- void *pArg,
- sqlite3_int64 iThreshold
-){
- (void)xCallback;
- (void)pArg;
- (void)iThreshold;
- return SQLITE_OK;
-}
-#endif
-
-/*
-** Set the soft heap-size limit for the library. Passing a zero or
-** negative value indicates no limit.
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_soft_heap_limit64(sqlite3_int64 n){
- sqlite3_int64 priorLimit;
- sqlite3_int64 excess;
- sqlite3_int64 nUsed;
-#ifndef SQLITE_OMIT_AUTOINIT
- int rc = sqlite3_initialize();
- if( rc ) return -1;
-#endif
- sqlite3_mutex_enter(mem0.mutex);
- priorLimit = mem0.alarmThreshold;
- if( n<0 ){
- sqlite3_mutex_leave(mem0.mutex);
- return priorLimit;
- }
- mem0.alarmThreshold = n;
- nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED);
- mem0.nearlyFull = (n>0 && n<=nUsed);
- sqlite3_mutex_leave(mem0.mutex);
- excess = sqlite3_memory_used() - n;
- if( excess>0 ) sqlite3_release_memory((int)(excess & 0x7fffffff));
- return priorLimit;
-}
-SQLITE_API void SQLITE_STDCALL sqlite3_soft_heap_limit(int n){
- if( n<0 ) n = 0;
- sqlite3_soft_heap_limit64(n);
-}
-
-/*
-** Initialize the memory allocation subsystem.
-*/
-SQLITE_PRIVATE int sqlite3MallocInit(void){
- int rc;
- if( sqlite3GlobalConfig.m.xMalloc==0 ){
- sqlite3MemSetDefault();
- }
- memset(&mem0, 0, sizeof(mem0));
- mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM);
- if( sqlite3GlobalConfig.pScratch && sqlite3GlobalConfig.szScratch>=100
- && sqlite3GlobalConfig.nScratch>0 ){
- int i, n, sz;
- ScratchFreeslot *pSlot;
- sz = ROUNDDOWN8(sqlite3GlobalConfig.szScratch);
- sqlite3GlobalConfig.szScratch = sz;
- pSlot = (ScratchFreeslot*)sqlite3GlobalConfig.pScratch;
- n = sqlite3GlobalConfig.nScratch;
- mem0.pScratchFree = pSlot;
- mem0.nScratchFree = n;
- for(i=0; ipNext = (ScratchFreeslot*)(sz+(char*)pSlot);
- pSlot = pSlot->pNext;
- }
- pSlot->pNext = 0;
- mem0.pScratchEnd = (void*)&pSlot[1];
- }else{
- mem0.pScratchEnd = 0;
- sqlite3GlobalConfig.pScratch = 0;
- sqlite3GlobalConfig.szScratch = 0;
- sqlite3GlobalConfig.nScratch = 0;
- }
- if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512
- || sqlite3GlobalConfig.nPage<=0 ){
- sqlite3GlobalConfig.pPage = 0;
- sqlite3GlobalConfig.szPage = 0;
- }
- rc = sqlite3GlobalConfig.m.xInit(sqlite3GlobalConfig.m.pAppData);
- if( rc!=SQLITE_OK ) memset(&mem0, 0, sizeof(mem0));
- return rc;
-}
-
-/*
-** Return true if the heap is currently under memory pressure - in other
-** words if the amount of heap used is close to the limit set by
-** sqlite3_soft_heap_limit().
-*/
-SQLITE_PRIVATE int sqlite3HeapNearlyFull(void){
- return mem0.nearlyFull;
-}
-
-/*
-** Deinitialize the memory allocation subsystem.
-*/
-SQLITE_PRIVATE void sqlite3MallocEnd(void){
- if( sqlite3GlobalConfig.m.xShutdown ){
- sqlite3GlobalConfig.m.xShutdown(sqlite3GlobalConfig.m.pAppData);
- }
- memset(&mem0, 0, sizeof(mem0));
-}
-
-/*
-** Return the amount of memory currently checked out.
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_used(void){
- sqlite3_int64 res, mx;
- sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, 0);
- return res;
-}
-
-/*
-** Return the maximum amount of memory that has ever been
-** checked out since either the beginning of this process
-** or since the most recent reset.
-*/
-SQLITE_API sqlite3_int64 SQLITE_STDCALL sqlite3_memory_highwater(int resetFlag){
- sqlite3_int64 res, mx;
- sqlite3_status64(SQLITE_STATUS_MEMORY_USED, &res, &mx, resetFlag);
- return mx;
-}
-
-/*
-** Trigger the alarm
-*/
-static void sqlite3MallocAlarm(int nByte){
- if( mem0.alarmThreshold<=0 ) return;
- sqlite3_mutex_leave(mem0.mutex);
- sqlite3_release_memory(nByte);
- sqlite3_mutex_enter(mem0.mutex);
-}
-
-/*
-** Do a memory allocation with statistics and alarms. Assume the
-** lock is already held.
-*/
-static int mallocWithAlarm(int n, void **pp){
- int nFull;
- void *p;
- assert( sqlite3_mutex_held(mem0.mutex) );
- nFull = sqlite3GlobalConfig.m.xRoundup(n);
- sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, n);
- if( mem0.alarmThreshold>0 ){
- sqlite3_int64 nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED);
- if( nUsed >= mem0.alarmThreshold - nFull ){
- mem0.nearlyFull = 1;
- sqlite3MallocAlarm(nFull);
- }else{
- mem0.nearlyFull = 0;
- }
- }
- p = sqlite3GlobalConfig.m.xMalloc(nFull);
-#ifdef SQLITE_ENABLE_MEMORY_MANAGEMENT
- if( p==0 && mem0.alarmThreshold>0 ){
- sqlite3MallocAlarm(nFull);
- p = sqlite3GlobalConfig.m.xMalloc(nFull);
- }
-#endif
- if( p ){
- nFull = sqlite3MallocSize(p);
- sqlite3StatusUp(SQLITE_STATUS_MEMORY_USED, nFull);
- sqlite3StatusUp(SQLITE_STATUS_MALLOC_COUNT, 1);
- }
- *pp = p;
- return nFull;
-}
-
-/*
-** Allocate memory. This routine is like sqlite3_malloc() except that it
-** assumes the memory subsystem has already been initialized.
-*/
-SQLITE_PRIVATE void *sqlite3Malloc(u64 n){
- void *p;
- if( n==0 || n>=0x7fffff00 ){
- /* A memory allocation of a number of bytes which is near the maximum
- ** signed integer value might cause an integer overflow inside of the
- ** xMalloc(). Hence we limit the maximum size to 0x7fffff00, giving
- ** 255 bytes of overhead. SQLite itself will never use anything near
- ** this amount. The only way to reach the limit is with sqlite3_malloc() */
- p = 0;
- }else if( sqlite3GlobalConfig.bMemstat ){
- sqlite3_mutex_enter(mem0.mutex);
- mallocWithAlarm((int)n, &p);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- p = sqlite3GlobalConfig.m.xMalloc((int)n);
- }
- assert( EIGHT_BYTE_ALIGNMENT(p) ); /* IMP: R-11148-40995 */
- return p;
-}
-
-/*
-** This version of the memory allocation is for use by the application.
-** First make sure the memory subsystem is initialized, then do the
-** allocation.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc(int n){
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- return n<=0 ? 0 : sqlite3Malloc(n);
-}
-SQLITE_API void *SQLITE_STDCALL sqlite3_malloc64(sqlite3_uint64 n){
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- return sqlite3Malloc(n);
-}
-
-/*
-** Each thread may only have a single outstanding allocation from
-** xScratchMalloc(). We verify this constraint in the single-threaded
-** case by setting scratchAllocOut to 1 when an allocation
-** is outstanding clearing it when the allocation is freed.
-*/
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
-static int scratchAllocOut = 0;
-#endif
-
-
-/*
-** Allocate memory that is to be used and released right away.
-** This routine is similar to alloca() in that it is not intended
-** for situations where the memory might be held long-term. This
-** routine is intended to get memory to old large transient data
-** structures that would not normally fit on the stack of an
-** embedded processor.
-*/
-SQLITE_PRIVATE void *sqlite3ScratchMalloc(int n){
- void *p;
- assert( n>0 );
-
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusHighwater(SQLITE_STATUS_SCRATCH_SIZE, n);
- if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){
- p = mem0.pScratchFree;
- mem0.pScratchFree = mem0.pScratchFree->pNext;
- mem0.nScratchFree--;
- sqlite3StatusUp(SQLITE_STATUS_SCRATCH_USED, 1);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- sqlite3_mutex_leave(mem0.mutex);
- p = sqlite3Malloc(n);
- if( sqlite3GlobalConfig.bMemstat && p ){
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusUp(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p));
- sqlite3_mutex_leave(mem0.mutex);
- }
- sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH);
- }
- assert( sqlite3_mutex_notheld(mem0.mutex) );
-
-
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
- /* EVIDENCE-OF: R-12970-05880 SQLite will not use more than one scratch
- ** buffers per thread.
- **
- ** This can only be checked in single-threaded mode.
- */
- assert( scratchAllocOut==0 );
- if( p ) scratchAllocOut++;
-#endif
-
- return p;
-}
-SQLITE_PRIVATE void sqlite3ScratchFree(void *p){
- if( p ){
-
-#if SQLITE_THREADSAFE==0 && !defined(NDEBUG)
- /* Verify that no more than two scratch allocation per thread
- ** is outstanding at one time. (This is only checked in the
- ** single-threaded case since checking in the multi-threaded case
- ** would be much more complicated.) */
- assert( scratchAllocOut>=1 && scratchAllocOut<=2 );
- scratchAllocOut--;
-#endif
-
- if( SQLITE_WITHIN(p, sqlite3GlobalConfig.pScratch, mem0.pScratchEnd) ){
- /* Release memory from the SQLITE_CONFIG_SCRATCH allocation */
- ScratchFreeslot *pSlot;
- pSlot = (ScratchFreeslot*)p;
- sqlite3_mutex_enter(mem0.mutex);
- pSlot->pNext = mem0.pScratchFree;
- mem0.pScratchFree = pSlot;
- mem0.nScratchFree++;
- assert( mem0.nScratchFree <= (u32)sqlite3GlobalConfig.nScratch );
- sqlite3StatusDown(SQLITE_STATUS_SCRATCH_USED, 1);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- /* Release memory back to the heap */
- assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) );
- assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_SCRATCH) );
- sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
- if( sqlite3GlobalConfig.bMemstat ){
- int iSize = sqlite3MallocSize(p);
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusDown(SQLITE_STATUS_SCRATCH_OVERFLOW, iSize);
- sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, iSize);
- sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1);
- sqlite3GlobalConfig.m.xFree(p);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- sqlite3GlobalConfig.m.xFree(p);
- }
- }
- }
-}
-
-/*
-** TRUE if p is a lookaside memory allocation from db
-*/
-#ifndef SQLITE_OMIT_LOOKASIDE
-static int isLookaside(sqlite3 *db, void *p){
- return SQLITE_WITHIN(p, db->lookaside.pStart, db->lookaside.pEnd);
-}
-#else
-#define isLookaside(A,B) 0
-#endif
-
-/*
-** Return the size of a memory allocation previously obtained from
-** sqlite3Malloc() or sqlite3_malloc().
-*/
-SQLITE_PRIVATE int sqlite3MallocSize(void *p){
- assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
- return sqlite3GlobalConfig.m.xSize(p);
-}
-SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3 *db, void *p){
- assert( p!=0 );
- if( db==0 || !isLookaside(db,p) ){
-#if SQLITE_DEBUG
- if( db==0 ){
- assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
- assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
- }else{
- assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- }
-#endif
- return sqlite3GlobalConfig.m.xSize(p);
- }else{
- assert( sqlite3_mutex_held(db->mutex) );
- return db->lookaside.sz;
- }
-}
-SQLITE_API sqlite3_uint64 SQLITE_STDCALL sqlite3_msize(void *p){
- assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
- assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
- return p ? sqlite3GlobalConfig.m.xSize(p) : 0;
-}
-
-/*
-** Free memory previously obtained from sqlite3Malloc().
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_free(void *p){
- if( p==0 ) return; /* IMP: R-49053-54554 */
- assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) );
- assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) );
- if( sqlite3GlobalConfig.bMemstat ){
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, sqlite3MallocSize(p));
- sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1);
- sqlite3GlobalConfig.m.xFree(p);
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- sqlite3GlobalConfig.m.xFree(p);
- }
-}
-
-/*
-** Add the size of memory allocation "p" to the count in
-** *db->pnBytesFreed.
-*/
-static SQLITE_NOINLINE void measureAllocationSize(sqlite3 *db, void *p){
- *db->pnBytesFreed += sqlite3DbMallocSize(db,p);
-}
-
-/*
-** Free memory that might be associated with a particular database
-** connection.
-*/
-SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){
- assert( db==0 || sqlite3_mutex_held(db->mutex) );
- if( p==0 ) return;
- if( db ){
- if( db->pnBytesFreed ){
- measureAllocationSize(db, p);
- return;
- }
- if( isLookaside(db, p) ){
- LookasideSlot *pBuf = (LookasideSlot*)p;
-#if SQLITE_DEBUG
- /* Trash all content in the buffer being freed */
- memset(p, 0xaa, db->lookaside.sz);
-#endif
- pBuf->pNext = db->lookaside.pFree;
- db->lookaside.pFree = pBuf;
- db->lookaside.nOut--;
- return;
- }
- }
- assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- assert( db!=0 || sqlite3MemdebugNoType(p, MEMTYPE_LOOKASIDE) );
- sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
- sqlite3_free(p);
-}
-
-/*
-** Change the size of an existing memory allocation
-*/
-SQLITE_PRIVATE void *sqlite3Realloc(void *pOld, u64 nBytes){
- int nOld, nNew, nDiff;
- void *pNew;
- assert( sqlite3MemdebugHasType(pOld, MEMTYPE_HEAP) );
- assert( sqlite3MemdebugNoType(pOld, (u8)~MEMTYPE_HEAP) );
- if( pOld==0 ){
- return sqlite3Malloc(nBytes); /* IMP: R-04300-56712 */
- }
- if( nBytes==0 ){
- sqlite3_free(pOld); /* IMP: R-26507-47431 */
- return 0;
- }
- if( nBytes>=0x7fffff00 ){
- /* The 0x7ffff00 limit term is explained in comments on sqlite3Malloc() */
- return 0;
- }
- nOld = sqlite3MallocSize(pOld);
- /* IMPLEMENTATION-OF: R-46199-30249 SQLite guarantees that the second
- ** argument to xRealloc is always a value returned by a prior call to
- ** xRoundup. */
- nNew = sqlite3GlobalConfig.m.xRoundup((int)nBytes);
- if( nOld==nNew ){
- pNew = pOld;
- }else if( sqlite3GlobalConfig.bMemstat ){
- sqlite3_mutex_enter(mem0.mutex);
- sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, (int)nBytes);
- nDiff = nNew - nOld;
- if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED) >=
- mem0.alarmThreshold-nDiff ){
- sqlite3MallocAlarm(nDiff);
- }
- pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
- if( pNew==0 && mem0.alarmThreshold>0 ){
- sqlite3MallocAlarm((int)nBytes);
- pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
- }
- if( pNew ){
- nNew = sqlite3MallocSize(pNew);
- sqlite3StatusUp(SQLITE_STATUS_MEMORY_USED, nNew-nOld);
- }
- sqlite3_mutex_leave(mem0.mutex);
- }else{
- pNew = sqlite3GlobalConfig.m.xRealloc(pOld, nNew);
- }
- assert( EIGHT_BYTE_ALIGNMENT(pNew) ); /* IMP: R-11148-40995 */
- return pNew;
-}
-
-/*
-** The public interface to sqlite3Realloc. Make sure that the memory
-** subsystem is initialized prior to invoking sqliteRealloc.
-*/
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc(void *pOld, int n){
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- if( n<0 ) n = 0; /* IMP: R-26507-47431 */
- return sqlite3Realloc(pOld, n);
-}
-SQLITE_API void *SQLITE_STDCALL sqlite3_realloc64(void *pOld, sqlite3_uint64 n){
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- return sqlite3Realloc(pOld, n);
-}
-
-
-/*
-** Allocate and zero memory.
-*/
-SQLITE_PRIVATE void *sqlite3MallocZero(u64 n){
- void *p = sqlite3Malloc(n);
- if( p ){
- memset(p, 0, (size_t)n);
- }
- return p;
-}
-
-/*
-** Allocate and zero memory. If the allocation fails, make
-** the mallocFailed flag in the connection pointer.
-*/
-SQLITE_PRIVATE void *sqlite3DbMallocZero(sqlite3 *db, u64 n){
- void *p;
- testcase( db==0 );
- p = sqlite3DbMallocRaw(db, n);
- if( p ) memset(p, 0, (size_t)n);
- return p;
-}
-
-
-/* Finish the work of sqlite3DbMallocRawNN for the unusual and
-** slower case when the allocation cannot be fulfilled using lookaside.
-*/
-static SQLITE_NOINLINE void *dbMallocRawFinish(sqlite3 *db, u64 n){
- void *p;
- assert( db!=0 );
- p = sqlite3Malloc(n);
- if( !p ) sqlite3OomFault(db);
- sqlite3MemdebugSetType(p,
- (db->lookaside.bDisable==0) ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP);
- return p;
-}
-
-/*
-** Allocate memory, either lookaside (if possible) or heap.
-** If the allocation fails, set the mallocFailed flag in
-** the connection pointer.
-**
-** If db!=0 and db->mallocFailed is true (indicating a prior malloc
-** failure on the same database connection) then always return 0.
-** Hence for a particular database connection, once malloc starts
-** failing, it fails consistently until mallocFailed is reset.
-** This is an important assumption. There are many places in the
-** code that do things like this:
-**
-** int *a = (int*)sqlite3DbMallocRaw(db, 100);
-** int *b = (int*)sqlite3DbMallocRaw(db, 200);
-** if( b ) a[10] = 9;
-**
-** In other words, if a subsequent malloc (ex: "b") worked, it is assumed
-** that all prior mallocs (ex: "a") worked too.
-**
-** The sqlite3MallocRawNN() variant guarantees that the "db" parameter is
-** not a NULL pointer.
-*/
-SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3 *db, u64 n){
- void *p;
- if( db ) return sqlite3DbMallocRawNN(db, n);
- p = sqlite3Malloc(n);
- sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
- return p;
-}
-SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3 *db, u64 n){
-#ifndef SQLITE_OMIT_LOOKASIDE
- LookasideSlot *pBuf;
- assert( db!=0 );
- assert( sqlite3_mutex_held(db->mutex) );
- assert( db->pnBytesFreed==0 );
- if( db->lookaside.bDisable==0 ){
- assert( db->mallocFailed==0 );
- if( n>db->lookaside.sz ){
- db->lookaside.anStat[1]++;
- }else if( (pBuf = db->lookaside.pFree)==0 ){
- db->lookaside.anStat[2]++;
- }else{
- db->lookaside.pFree = pBuf->pNext;
- db->lookaside.nOut++;
- db->lookaside.anStat[0]++;
- if( db->lookaside.nOut>db->lookaside.mxOut ){
- db->lookaside.mxOut = db->lookaside.nOut;
- }
- return (void*)pBuf;
- }
- }else if( db->mallocFailed ){
- return 0;
- }
-#else
- assert( db!=0 );
- assert( sqlite3_mutex_held(db->mutex) );
- assert( db->pnBytesFreed==0 );
- if( db->mallocFailed ){
- return 0;
- }
-#endif
- return dbMallocRawFinish(db, n);
-}
-
-/* Forward declaration */
-static SQLITE_NOINLINE void *dbReallocFinish(sqlite3 *db, void *p, u64 n);
-
-/*
-** Resize the block of memory pointed to by p to n bytes. If the
-** resize fails, set the mallocFailed flag in the connection object.
-*/
-SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *db, void *p, u64 n){
- assert( db!=0 );
- if( p==0 ) return sqlite3DbMallocRawNN(db, n);
- assert( sqlite3_mutex_held(db->mutex) );
- if( isLookaside(db,p) && n<=db->lookaside.sz ) return p;
- return dbReallocFinish(db, p, n);
-}
-static SQLITE_NOINLINE void *dbReallocFinish(sqlite3 *db, void *p, u64 n){
- void *pNew = 0;
- assert( db!=0 );
- assert( p!=0 );
- if( db->mallocFailed==0 ){
- if( isLookaside(db, p) ){
- pNew = sqlite3DbMallocRawNN(db, n);
- if( pNew ){
- memcpy(pNew, p, db->lookaside.sz);
- sqlite3DbFree(db, p);
- }
- }else{
- assert( sqlite3MemdebugHasType(p, (MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- assert( sqlite3MemdebugNoType(p, (u8)~(MEMTYPE_LOOKASIDE|MEMTYPE_HEAP)) );
- sqlite3MemdebugSetType(p, MEMTYPE_HEAP);
- pNew = sqlite3_realloc64(p, n);
- if( !pNew ){
- sqlite3OomFault(db);
- }
- sqlite3MemdebugSetType(pNew,
- (db->lookaside.bDisable==0 ? MEMTYPE_LOOKASIDE : MEMTYPE_HEAP));
- }
- }
- return pNew;
-}
-
-/*
-** Attempt to reallocate p. If the reallocation fails, then free p
-** and set the mallocFailed flag in the database connection.
-*/
-SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *db, void *p, u64 n){
- void *pNew;
- pNew = sqlite3DbRealloc(db, p, n);
- if( !pNew ){
- sqlite3DbFree(db, p);
- }
- return pNew;
-}
-
-/*
-** Make a copy of a string in memory obtained from sqliteMalloc(). These
-** functions call sqlite3MallocRaw() directly instead of sqliteMalloc(). This
-** is because when memory debugging is turned on, these two functions are
-** called via macros that record the current file and line number in the
-** ThreadData structure.
-*/
-SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3 *db, const char *z){
- char *zNew;
- size_t n;
- if( z==0 ){
- return 0;
- }
- n = sqlite3Strlen30(z) + 1;
- assert( (n&0x7fffffff)==n );
- zNew = sqlite3DbMallocRaw(db, (int)n);
- if( zNew ){
- memcpy(zNew, z, n);
- }
- return zNew;
-}
-SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3 *db, const char *z, u64 n){
- char *zNew;
- assert( db!=0 );
- if( z==0 ){
- return 0;
- }
- assert( (n&0x7fffffff)==n );
- zNew = sqlite3DbMallocRawNN(db, n+1);
- if( zNew ){
- memcpy(zNew, z, (size_t)n);
- zNew[n] = 0;
- }
- return zNew;
-}
-
-/*
-** Free any prior content in *pz and replace it with a copy of zNew.
-*/
-SQLITE_PRIVATE void sqlite3SetString(char **pz, sqlite3 *db, const char *zNew){
- sqlite3DbFree(db, *pz);
- *pz = sqlite3DbStrDup(db, zNew);
-}
-
-/*
-** Call this routine to record the fact that an OOM (out-of-memory) error
-** has happened. This routine will set db->mallocFailed, and also
-** temporarily disable the lookaside memory allocator and interrupt
-** any running VDBEs.
-*/
-SQLITE_PRIVATE void sqlite3OomFault(sqlite3 *db){
- if( db->mallocFailed==0 && db->bBenignMalloc==0 ){
- db->mallocFailed = 1;
- if( db->nVdbeExec>0 ){
- db->u1.isInterrupted = 1;
- }
- db->lookaside.bDisable++;
- }
-}
-
-/*
-** This routine reactivates the memory allocator and clears the
-** db->mallocFailed flag as necessary.
-**
-** The memory allocator is not restarted if there are running
-** VDBEs.
-*/
-SQLITE_PRIVATE void sqlite3OomClear(sqlite3 *db){
- if( db->mallocFailed && db->nVdbeExec==0 ){
- db->mallocFailed = 0;
- db->u1.isInterrupted = 0;
- assert( db->lookaside.bDisable>0 );
- db->lookaside.bDisable--;
- }
-}
-
-/*
-** Take actions at the end of an API call to indicate an OOM error
-*/
-static SQLITE_NOINLINE int apiOomError(sqlite3 *db){
- sqlite3OomClear(db);
- sqlite3Error(db, SQLITE_NOMEM);
- return SQLITE_NOMEM_BKPT;
-}
-
-/*
-** This function must be called before exiting any API function (i.e.
-** returning control to the user) that has called sqlite3_malloc or
-** sqlite3_realloc.
-**
-** The returned value is normally a copy of the second argument to this
-** function. However, if a malloc() failure has occurred since the previous
-** invocation SQLITE_NOMEM is returned instead.
-**
-** If an OOM as occurred, then the connection error-code (the value
-** returned by sqlite3_errcode()) is set to SQLITE_NOMEM.
-*/
-SQLITE_PRIVATE int sqlite3ApiExit(sqlite3* db, int rc){
- /* If the db handle must hold the connection handle mutex here.
- ** Otherwise the read (and possible write) of db->mallocFailed
- ** is unsafe, as is the call to sqlite3Error().
- */
- assert( db!=0 );
- assert( sqlite3_mutex_held(db->mutex) );
- if( db->mallocFailed || rc==SQLITE_IOERR_NOMEM ){
- return apiOomError(db);
- }
- return rc & db->errMask;
-}
-
-/************** End of malloc.c **********************************************/
-/************** Begin file printf.c ******************************************/
-/*
-** The "printf" code that follows dates from the 1980's. It is in
-** the public domain.
-**
-**************************************************************************
-**
-** This file contains code for a set of "printf"-like routines. These
-** routines format strings much like the printf() from the standard C
-** library, though the implementation here has enhancements to support
-** SQLite.
-*/
-/* #include "sqliteInt.h" */
-
-/*
-** Conversion types fall into various categories as defined by the
-** following enumeration.
-*/
-#define etRADIX 0 /* Integer types. %d, %x, %o, and so forth */
-#define etFLOAT 1 /* Floating point. %f */
-#define etEXP 2 /* Exponentional notation. %e and %E */
-#define etGENERIC 3 /* Floating or exponential, depending on exponent. %g */
-#define etSIZE 4 /* Return number of characters processed so far. %n */
-#define etSTRING 5 /* Strings. %s */
-#define etDYNSTRING 6 /* Dynamically allocated strings. %z */
-#define etPERCENT 7 /* Percent symbol. %% */
-#define etCHARX 8 /* Characters. %c */
-/* The rest are extensions, not normally found in printf() */
-#define etSQLESCAPE 9 /* Strings with '\'' doubled. %q */
-#define etSQLESCAPE2 10 /* Strings with '\'' doubled and enclosed in '',
- NULL pointers replaced by SQL NULL. %Q */
-#define etTOKEN 11 /* a pointer to a Token structure */
-#define etSRCLIST 12 /* a pointer to a SrcList */
-#define etPOINTER 13 /* The %p conversion */
-#define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */
-#define etORDINAL 15 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */
-
-#define etINVALID 16 /* Any unrecognized conversion type */
-
-
-/*
-** An "etByte" is an 8-bit unsigned value.
-*/
-typedef unsigned char etByte;
-
-/*
-** Each builtin conversion character (ex: the 'd' in "%d") is described
-** by an instance of the following structure
-*/
-typedef struct et_info { /* Information about each format field */
- char fmttype; /* The format field code letter */
- etByte base; /* The base for radix conversion */
- etByte flags; /* One or more of FLAG_ constants below */
- etByte type; /* Conversion paradigm */
- etByte charset; /* Offset into aDigits[] of the digits string */
- etByte prefix; /* Offset into aPrefix[] of the prefix string */
-} et_info;
-
-/*
-** Allowed values for et_info.flags
-*/
-#define FLAG_SIGNED 1 /* True if the value to convert is signed */
-#define FLAG_INTERN 2 /* True if for internal use only */
-#define FLAG_STRING 4 /* Allow infinity precision */
-
-
-/*
-** The following table is searched linearly, so it is good to put the
-** most frequently used conversion types first.
-*/
-static const char aDigits[] = "0123456789ABCDEF0123456789abcdef";
-static const char aPrefix[] = "-x0\000X0";
-static const et_info fmtinfo[] = {
- { 'd', 10, 1, etRADIX, 0, 0 },
- { 's', 0, 4, etSTRING, 0, 0 },
- { 'g', 0, 1, etGENERIC, 30, 0 },
- { 'z', 0, 4, etDYNSTRING, 0, 0 },
- { 'q', 0, 4, etSQLESCAPE, 0, 0 },
- { 'Q', 0, 4, etSQLESCAPE2, 0, 0 },
- { 'w', 0, 4, etSQLESCAPE3, 0, 0 },
- { 'c', 0, 0, etCHARX, 0, 0 },
- { 'o', 8, 0, etRADIX, 0, 2 },
- { 'u', 10, 0, etRADIX, 0, 0 },
- { 'x', 16, 0, etRADIX, 16, 1 },
- { 'X', 16, 0, etRADIX, 0, 4 },
-#ifndef SQLITE_OMIT_FLOATING_POINT
- { 'f', 0, 1, etFLOAT, 0, 0 },
- { 'e', 0, 1, etEXP, 30, 0 },
- { 'E', 0, 1, etEXP, 14, 0 },
- { 'G', 0, 1, etGENERIC, 14, 0 },
-#endif
- { 'i', 10, 1, etRADIX, 0, 0 },
- { 'n', 0, 0, etSIZE, 0, 0 },
- { '%', 0, 0, etPERCENT, 0, 0 },
- { 'p', 16, 0, etPOINTER, 0, 1 },
-
-/* All the rest have the FLAG_INTERN bit set and are thus for internal
-** use only */
- { 'T', 0, 2, etTOKEN, 0, 0 },
- { 'S', 0, 2, etSRCLIST, 0, 0 },
- { 'r', 10, 3, etORDINAL, 0, 0 },
-};
-
-/*
-** If SQLITE_OMIT_FLOATING_POINT is defined, then none of the floating point
-** conversions will work.
-*/
-#ifndef SQLITE_OMIT_FLOATING_POINT
-/*
-** "*val" is a double such that 0.1 <= *val < 10.0
-** Return the ascii code for the leading digit of *val, then
-** multiply "*val" by 10.0 to renormalize.
-**
-** Example:
-** input: *val = 3.14159
-** output: *val = 1.4159 function return = '3'
-**
-** The counter *cnt is incremented each time. After counter exceeds
-** 16 (the number of significant digits in a 64-bit float) '0' is
-** always returned.
-*/
-static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){
- int digit;
- LONGDOUBLE_TYPE d;
- if( (*cnt)<=0 ) return '0';
- (*cnt)--;
- digit = (int)*val;
- d = digit;
- digit += '0';
- *val = (*val - d)*10.0;
- return (char)digit;
-}
-#endif /* SQLITE_OMIT_FLOATING_POINT */
-
-/*
-** Set the StrAccum object to an error mode.
-*/
-static void setStrAccumError(StrAccum *p, u8 eError){
- assert( eError==STRACCUM_NOMEM || eError==STRACCUM_TOOBIG );
- p->accError = eError;
- p->nAlloc = 0;
-}
-
-/*
-** Extra argument values from a PrintfArguments object
-*/
-static sqlite3_int64 getIntArg(PrintfArguments *p){
- if( p->nArg<=p->nUsed ) return 0;
- return sqlite3_value_int64(p->apArg[p->nUsed++]);
-}
-static double getDoubleArg(PrintfArguments *p){
- if( p->nArg<=p->nUsed ) return 0.0;
- return sqlite3_value_double(p->apArg[p->nUsed++]);
-}
-static char *getTextArg(PrintfArguments *p){
- if( p->nArg<=p->nUsed ) return 0;
- return (char*)sqlite3_value_text(p->apArg[p->nUsed++]);
-}
-
-
-/*
-** On machines with a small stack size, you can redefine the
-** SQLITE_PRINT_BUF_SIZE to be something smaller, if desired.
-*/
-#ifndef SQLITE_PRINT_BUF_SIZE
-# define SQLITE_PRINT_BUF_SIZE 70
-#endif
-#define etBUFSIZE SQLITE_PRINT_BUF_SIZE /* Size of the output buffer */
-
-/*
-** Render a string given by "fmt" into the StrAccum object.
-*/
-SQLITE_PRIVATE void sqlite3VXPrintf(
- StrAccum *pAccum, /* Accumulate results here */
- const char *fmt, /* Format string */
- va_list ap /* arguments */
-){
- int c; /* Next character in the format string */
- char *bufpt; /* Pointer to the conversion buffer */
- int precision; /* Precision of the current field */
- int length; /* Length of the field */
- int idx; /* A general purpose loop counter */
- int width; /* Width of the current field */
- etByte flag_leftjustify; /* True if "-" flag is present */
- etByte flag_plussign; /* True if "+" flag is present */
- etByte flag_blanksign; /* True if " " flag is present */
- etByte flag_alternateform; /* True if "#" flag is present */
- etByte flag_altform2; /* True if "!" flag is present */
- etByte flag_zeropad; /* True if field width constant starts with zero */
- etByte flag_long; /* True if "l" flag is present */
- etByte flag_longlong; /* True if the "ll" flag is present */
- etByte done; /* Loop termination flag */
- etByte xtype = etINVALID; /* Conversion paradigm */
- u8 bArgList; /* True for SQLITE_PRINTF_SQLFUNC */
- u8 useIntern; /* Ok to use internal conversions (ex: %T) */
- char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */
- sqlite_uint64 longvalue; /* Value for integer types */
- LONGDOUBLE_TYPE realvalue; /* Value for real types */
- const et_info *infop; /* Pointer to the appropriate info structure */
- char *zOut; /* Rendering buffer */
- int nOut; /* Size of the rendering buffer */
- char *zExtra = 0; /* Malloced memory used by some conversion */
-#ifndef SQLITE_OMIT_FLOATING_POINT
- int exp, e2; /* exponent of real numbers */
- int nsd; /* Number of significant digits returned */
- double rounder; /* Used for rounding floating point values */
- etByte flag_dp; /* True if decimal point should be shown */
- etByte flag_rtz; /* True if trailing zeros should be removed */
-#endif
- PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */
- char buf[etBUFSIZE]; /* Conversion buffer */
-
- bufpt = 0;
- if( pAccum->printfFlags ){
- if( (bArgList = (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC))!=0 ){
- pArgList = va_arg(ap, PrintfArguments*);
- }
- useIntern = pAccum->printfFlags & SQLITE_PRINTF_INTERNAL;
- }else{
- bArgList = useIntern = 0;
- }
- for(; (c=(*fmt))!=0; ++fmt){
- if( c!='%' ){
- bufpt = (char *)fmt;
-#if HAVE_STRCHRNUL
- fmt = strchrnul(fmt, '%');
-#else
- do{ fmt++; }while( *fmt && *fmt != '%' );
-#endif
- sqlite3StrAccumAppend(pAccum, bufpt, (int)(fmt - bufpt));
- if( *fmt==0 ) break;
- }
- if( (c=(*++fmt))==0 ){
- sqlite3StrAccumAppend(pAccum, "%", 1);
- break;
- }
- /* Find out what flags are present */
- flag_leftjustify = flag_plussign = flag_blanksign =
- flag_alternateform = flag_altform2 = flag_zeropad = 0;
- done = 0;
- do{
- switch( c ){
- case '-': flag_leftjustify = 1; break;
- case '+': flag_plussign = 1; break;
- case ' ': flag_blanksign = 1; break;
- case '#': flag_alternateform = 1; break;
- case '!': flag_altform2 = 1; break;
- case '0': flag_zeropad = 1; break;
- default: done = 1; break;
- }
- }while( !done && (c=(*++fmt))!=0 );
- /* Get the field width */
- if( c=='*' ){
- if( bArgList ){
- width = (int)getIntArg(pArgList);
- }else{
- width = va_arg(ap,int);
- }
- if( width<0 ){
- flag_leftjustify = 1;
- width = width >= -2147483647 ? -width : 0;
- }
- c = *++fmt;
- }else{
- unsigned wx = 0;
- while( c>='0' && c<='9' ){
- wx = wx*10 + c - '0';
- c = *++fmt;
- }
- testcase( wx>0x7fffffff );
- width = wx & 0x7fffffff;
- }
- assert( width>=0 );
-#ifdef SQLITE_PRINTF_PRECISION_LIMIT
- if( width>SQLITE_PRINTF_PRECISION_LIMIT ){
- width = SQLITE_PRINTF_PRECISION_LIMIT;
- }
-#endif
-
- /* Get the precision */
- if( c=='.' ){
- c = *++fmt;
- if( c=='*' ){
- if( bArgList ){
- precision = (int)getIntArg(pArgList);
- }else{
- precision = va_arg(ap,int);
- }
- c = *++fmt;
- if( precision<0 ){
- precision = precision >= -2147483647 ? -precision : -1;
- }
- }else{
- unsigned px = 0;
- while( c>='0' && c<='9' ){
- px = px*10 + c - '0';
- c = *++fmt;
- }
- testcase( px>0x7fffffff );
- precision = px & 0x7fffffff;
- }
- }else{
- precision = -1;
- }
- assert( precision>=(-1) );
-#ifdef SQLITE_PRINTF_PRECISION_LIMIT
- if( precision>SQLITE_PRINTF_PRECISION_LIMIT ){
- precision = SQLITE_PRINTF_PRECISION_LIMIT;
- }
-#endif
-
-
- /* Get the conversion type modifier */
- if( c=='l' ){
- flag_long = 1;
- c = *++fmt;
- if( c=='l' ){
- flag_longlong = 1;
- c = *++fmt;
- }else{
- flag_longlong = 0;
- }
- }else{
- flag_long = flag_longlong = 0;
- }
- /* Fetch the info entry for the field */
- infop = &fmtinfo[0];
- xtype = etINVALID;
- for(idx=0; idxflags & FLAG_INTERN)==0 ){
- xtype = infop->type;
- }else{
- return;
- }
- break;
- }
- }
-
- /*
- ** At this point, variables are initialized as follows:
- **
- ** flag_alternateform TRUE if a '#' is present.
- ** flag_altform2 TRUE if a '!' is present.
- ** flag_plussign TRUE if a '+' is present.
- ** flag_leftjustify TRUE if a '-' is present or if the
- ** field width was negative.
- ** flag_zeropad TRUE if the width began with 0.
- ** flag_long TRUE if the letter 'l' (ell) prefixed
- ** the conversion character.
- ** flag_longlong TRUE if the letter 'll' (ell ell) prefixed
- ** the conversion character.
- ** flag_blanksign TRUE if a ' ' is present.
- ** width The specified field width. This is
- ** always non-negative. Zero is the default.
- ** precision The specified precision. The default
- ** is -1.
- ** xtype The class of the conversion.
- ** infop Pointer to the appropriate info struct.
- */
- switch( xtype ){
- case etPOINTER:
- flag_longlong = sizeof(char*)==sizeof(i64);
- flag_long = sizeof(char*)==sizeof(long int);
- /* Fall through into the next case */
- case etORDINAL:
- case etRADIX:
- if( infop->flags & FLAG_SIGNED ){
- i64 v;
- if( bArgList ){
- v = getIntArg(pArgList);
- }else if( flag_longlong ){
- v = va_arg(ap,i64);
- }else if( flag_long ){
- v = va_arg(ap,long int);
- }else{
- v = va_arg(ap,int);
- }
- if( v<0 ){
- if( v==SMALLEST_INT64 ){
- longvalue = ((u64)1)<<63;
- }else{
- longvalue = -v;
- }
- prefix = '-';
- }else{
- longvalue = v;
- if( flag_plussign ) prefix = '+';
- else if( flag_blanksign ) prefix = ' ';
- else prefix = 0;
- }
- }else{
- if( bArgList ){
- longvalue = (u64)getIntArg(pArgList);
- }else if( flag_longlong ){
- longvalue = va_arg(ap,u64);
- }else if( flag_long ){
- longvalue = va_arg(ap,unsigned long int);
- }else{
- longvalue = va_arg(ap,unsigned int);
- }
- prefix = 0;
- }
- if( longvalue==0 ) flag_alternateform = 0;
- if( flag_zeropad && precision=4 || (longvalue/10)%10==1 ){
- x = 0;
- }
- *(--bufpt) = zOrd[x*2+1];
- *(--bufpt) = zOrd[x*2];
- }
- {
- const char *cset = &aDigits[infop->charset];
- u8 base = infop->base;
- do{ /* Convert to ascii */
- *(--bufpt) = cset[longvalue%base];
- longvalue = longvalue/base;
- }while( longvalue>0 );
- }
- length = (int)(&zOut[nOut-1]-bufpt);
- for(idx=precision-length; idx>0; idx--){
- *(--bufpt) = '0'; /* Zero pad */
- }
- if( prefix ) *(--bufpt) = prefix; /* Add sign */
- if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */
- const char *pre;
- char x;
- pre = &aPrefix[infop->prefix];
- for(; (x=(*pre))!=0; pre++) *(--bufpt) = x;
- }
- length = (int)(&zOut[nOut-1]-bufpt);
- break;
- case etFLOAT:
- case etEXP:
- case etGENERIC:
- if( bArgList ){
- realvalue = getDoubleArg(pArgList);
- }else{
- realvalue = va_arg(ap,double);
- }
-#ifdef SQLITE_OMIT_FLOATING_POINT
- length = 0;
-#else
- if( precision<0 ) precision = 6; /* Set default precision */
- if( realvalue<0.0 ){
- realvalue = -realvalue;
- prefix = '-';
- }else{
- if( flag_plussign ) prefix = '+';
- else if( flag_blanksign ) prefix = ' ';
- else prefix = 0;
- }
- if( xtype==etGENERIC && precision>0 ) precision--;
- testcase( precision>0xfff );
- for(idx=precision&0xfff, rounder=0.5; idx>0; idx--, rounder*=0.1){}
- if( xtype==etFLOAT ) realvalue += rounder;
- /* Normalize realvalue to within 10.0 > realvalue >= 1.0 */
- exp = 0;
- if( sqlite3IsNaN((double)realvalue) ){
- bufpt = "NaN";
- length = 3;
- break;
- }
- if( realvalue>0.0 ){
- LONGDOUBLE_TYPE scale = 1.0;
- while( realvalue>=1e100*scale && exp<=350 ){ scale *= 1e100;exp+=100;}
- while( realvalue>=1e10*scale && exp<=350 ){ scale *= 1e10; exp+=10; }
- while( realvalue>=10.0*scale && exp<=350 ){ scale *= 10.0; exp++; }
- realvalue /= scale;
- while( realvalue<1e-8 ){ realvalue *= 1e8; exp-=8; }
- while( realvalue<1.0 ){ realvalue *= 10.0; exp--; }
- if( exp>350 ){
- bufpt = buf;
- buf[0] = prefix;
- memcpy(buf+(prefix!=0),"Inf",4);
- length = 3+(prefix!=0);
- break;
- }
- }
- bufpt = buf;
- /*
- ** If the field type is etGENERIC, then convert to either etEXP
- ** or etFLOAT, as appropriate.
- */
- if( xtype!=etFLOAT ){
- realvalue += rounder;
- if( realvalue>=10.0 ){ realvalue *= 0.1; exp++; }
- }
- if( xtype==etGENERIC ){
- flag_rtz = !flag_alternateform;
- if( exp<-4 || exp>precision ){
- xtype = etEXP;
- }else{
- precision = precision - exp;
- xtype = etFLOAT;
- }
- }else{
- flag_rtz = flag_altform2;
- }
- if( xtype==etEXP ){
- e2 = 0;
- }else{
- e2 = exp;
- }
- if( MAX(e2,0)+(i64)precision+(i64)width > etBUFSIZE - 15 ){
- bufpt = zExtra
- = sqlite3Malloc( MAX(e2,0)+(i64)precision+(i64)width+15 );
- if( bufpt==0 ){
- setStrAccumError(pAccum, STRACCUM_NOMEM);
- return;
- }
- }
- zOut = bufpt;
- nsd = 16 + flag_altform2*10;
- flag_dp = (precision>0 ?1:0) | flag_alternateform | flag_altform2;
- /* The sign in front of the number */
- if( prefix ){
- *(bufpt++) = prefix;
- }
- /* Digits prior to the decimal point */
- if( e2<0 ){
- *(bufpt++) = '0';
- }else{
- for(; e2>=0; e2--){
- *(bufpt++) = et_getdigit(&realvalue,&nsd);
- }
- }
- /* The decimal point */
- if( flag_dp ){
- *(bufpt++) = '.';
- }
- /* "0" digits after the decimal point but before the first
- ** significant digit of the number */
- for(e2++; e2<0; precision--, e2++){
- assert( precision>0 );
- *(bufpt++) = '0';
- }
- /* Significant digits after the decimal point */
- while( (precision--)>0 ){
- *(bufpt++) = et_getdigit(&realvalue,&nsd);
- }
- /* Remove trailing zeros and the "." if no digits follow the "." */
- if( flag_rtz && flag_dp ){
- while( bufpt[-1]=='0' ) *(--bufpt) = 0;
- assert( bufpt>zOut );
- if( bufpt[-1]=='.' ){
- if( flag_altform2 ){
- *(bufpt++) = '0';
- }else{
- *(--bufpt) = 0;
- }
- }
- }
- /* Add the "eNNN" suffix */
- if( xtype==etEXP ){
- *(bufpt++) = aDigits[infop->charset];
- if( exp<0 ){
- *(bufpt++) = '-'; exp = -exp;
- }else{
- *(bufpt++) = '+';
- }
- if( exp>=100 ){
- *(bufpt++) = (char)((exp/100)+'0'); /* 100's digit */
- exp %= 100;
- }
- *(bufpt++) = (char)(exp/10+'0'); /* 10's digit */
- *(bufpt++) = (char)(exp%10+'0'); /* 1's digit */
- }
- *bufpt = 0;
-
- /* The converted number is in buf[] and zero terminated. Output it.
- ** Note that the number is in the usual order, not reversed as with
- ** integer conversions. */
- length = (int)(bufpt-zOut);
- bufpt = zOut;
-
- /* Special case: Add leading zeros if the flag_zeropad flag is
- ** set and we are not left justified */
- if( flag_zeropad && !flag_leftjustify && length < width){
- int i;
- int nPad = width - length;
- for(i=width; i>=nPad; i--){
- bufpt[i] = bufpt[i-nPad];
- }
- i = prefix!=0;
- while( nPad-- ) bufpt[i++] = '0';
- length = width;
- }
-#endif /* !defined(SQLITE_OMIT_FLOATING_POINT) */
- break;
- case etSIZE:
- if( !bArgList ){
- *(va_arg(ap,int*)) = pAccum->nChar;
- }
- length = width = 0;
- break;
- case etPERCENT:
- buf[0] = '%';
- bufpt = buf;
- length = 1;
- break;
- case etCHARX:
- if( bArgList ){
- bufpt = getTextArg(pArgList);
- c = bufpt ? bufpt[0] : 0;
- }else{
- c = va_arg(ap,int);
- }
- if( precision>1 ){
- width -= precision-1;
- if( width>1 && !flag_leftjustify ){
- sqlite3AppendChar(pAccum, width-1, ' ');
- width = 0;
- }
- sqlite3AppendChar(pAccum, precision-1, c);
- }
- length = 1;
- buf[0] = c;
- bufpt = buf;
- break;
- case etSTRING:
- case etDYNSTRING:
- if( bArgList ){
- bufpt = getTextArg(pArgList);
- xtype = etSTRING;
- }else{
- bufpt = va_arg(ap,char*);
- }
- if( bufpt==0 ){
- bufpt = "";
- }else if( xtype==etDYNSTRING ){
- zExtra = bufpt;
- }
- if( precision>=0 ){
- for(length=0; lengthetBUFSIZE ){
- bufpt = zExtra = sqlite3Malloc( n );
- if( bufpt==0 ){
- setStrAccumError(pAccum, STRACCUM_NOMEM);
- return;
- }
- }else{
- bufpt = buf;
- }
- j = 0;
- if( needQuote ) bufpt[j++] = q;
- k = i;
- for(i=0; i=0 && precisionn ){
- sqlite3StrAccumAppend(pAccum, (const char*)pToken->z, pToken->n);
- }
- length = width = 0;
- break;
- }
- case etSRCLIST: {
- SrcList *pSrc = va_arg(ap, SrcList*);
- int k = va_arg(ap, int);
- struct SrcList_item *pItem = &pSrc->a[k];
- assert( bArgList==0 );
- assert( k>=0 && knSrc );
- if( pItem->zDatabase ){
- sqlite3StrAccumAppendAll(pAccum, pItem->zDatabase);
- sqlite3StrAccumAppend(pAccum, ".", 1);
- }
- sqlite3StrAccumAppendAll(pAccum, pItem->zName);
- length = width = 0;
- break;
- }
- default: {
- assert( xtype==etINVALID );
- return;
- }
- }/* End switch over the format type */
- /*
- ** The text of the conversion is pointed to by "bufpt" and is
- ** "length" characters long. The field width is "width". Do
- ** the output.
- */
- width -= length;
- if( width>0 && !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
- sqlite3StrAccumAppend(pAccum, bufpt, length);
- if( width>0 && flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' ');
-
- if( zExtra ){
- sqlite3DbFree(pAccum->db, zExtra);
- zExtra = 0;
- }
- }/* End for loop over the format string */
-} /* End of function */
-
-/*
-** Enlarge the memory allocation on a StrAccum object so that it is
-** able to accept at least N more bytes of text.
-**
-** Return the number of bytes of text that StrAccum is able to accept
-** after the attempted enlargement. The value returned might be zero.
-*/
-static int sqlite3StrAccumEnlarge(StrAccum *p, int N){
- char *zNew;
- assert( p->nChar+(i64)N >= p->nAlloc ); /* Only called if really needed */
- if( p->accError ){
- testcase(p->accError==STRACCUM_TOOBIG);
- testcase(p->accError==STRACCUM_NOMEM);
- return 0;
- }
- if( p->mxAlloc==0 ){
- N = p->nAlloc - p->nChar - 1;
- setStrAccumError(p, STRACCUM_TOOBIG);
- return N;
- }else{
- char *zOld = isMalloced(p) ? p->zText : 0;
- i64 szNew = p->nChar;
- assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) );
- szNew += N + 1;
- if( szNew+p->nChar<=p->mxAlloc ){
- /* Force exponential buffer size growth as long as it does not overflow,
- ** to avoid having to call this routine too often */
- szNew += p->nChar;
- }
- if( szNew > p->mxAlloc ){
- sqlite3StrAccumReset(p);
- setStrAccumError(p, STRACCUM_TOOBIG);
- return 0;
- }else{
- p->nAlloc = (int)szNew;
- }
- if( p->db ){
- zNew = sqlite3DbRealloc(p->db, zOld, p->nAlloc);
- }else{
- zNew = sqlite3_realloc64(zOld, p->nAlloc);
- }
- if( zNew ){
- assert( p->zText!=0 || p->nChar==0 );
- if( !isMalloced(p) && p->nChar>0 ) memcpy(zNew, p->zText, p->nChar);
- p->zText = zNew;
- p->nAlloc = sqlite3DbMallocSize(p->db, zNew);
- p->printfFlags |= SQLITE_PRINTF_MALLOCED;
- }else{
- sqlite3StrAccumReset(p);
- setStrAccumError(p, STRACCUM_NOMEM);
- return 0;
- }
- }
- return N;
-}
-
-/*
-** Append N copies of character c to the given string buffer.
-*/
-SQLITE_PRIVATE void sqlite3AppendChar(StrAccum *p, int N, char c){
- testcase( p->nChar + (i64)N > 0x7fffffff );
- if( p->nChar+(i64)N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ){
- return;
- }
- assert( (p->zText==p->zBase)==!isMalloced(p) );
- while( (N--)>0 ) p->zText[p->nChar++] = c;
-}
-
-/*
-** The StrAccum "p" is not large enough to accept N new bytes of z[].
-** So enlarge if first, then do the append.
-**
-** This is a helper routine to sqlite3StrAccumAppend() that does special-case
-** work (enlarging the buffer) using tail recursion, so that the
-** sqlite3StrAccumAppend() routine can use fast calling semantics.
-*/
-static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){
- N = sqlite3StrAccumEnlarge(p, N);
- if( N>0 ){
- memcpy(&p->zText[p->nChar], z, N);
- p->nChar += N;
- }
- assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) );
-}
-
-/*
-** Append N bytes of text from z to the StrAccum object. Increase the
-** size of the memory allocation for StrAccum if necessary.
-*/
-SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){
- assert( z!=0 || N==0 );
- assert( p->zText!=0 || p->nChar==0 || p->accError );
- assert( N>=0 );
- assert( p->accError==0 || p->nAlloc==0 );
- if( p->nChar+N >= p->nAlloc ){
- enlargeAndAppend(p,z,N);
- }else{
- assert( p->zText );
- p->nChar += N;
- memcpy(&p->zText[p->nChar-N], z, N);
- }
-}
-
-/*
-** Append the complete text of zero-terminated string z[] to the p string.
-*/
-SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum *p, const char *z){
- sqlite3StrAccumAppend(p, z, sqlite3Strlen30(z));
-}
-
-
-/*
-** Finish off a string by making sure it is zero-terminated.
-** Return a pointer to the resulting string. Return a NULL
-** pointer if any kind of error was encountered.
-*/
-SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){
- if( p->zText ){
- assert( (p->zText==p->zBase)==!isMalloced(p) );
- p->zText[p->nChar] = 0;
- if( p->mxAlloc>0 && !isMalloced(p) ){
- p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 );
- if( p->zText ){
- memcpy(p->zText, p->zBase, p->nChar+1);
- p->printfFlags |= SQLITE_PRINTF_MALLOCED;
- }else{
- setStrAccumError(p, STRACCUM_NOMEM);
- }
- }
- }
- return p->zText;
-}
-
-/*
-** Reset an StrAccum string. Reclaim all malloced memory.
-*/
-SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum *p){
- assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) );
- if( isMalloced(p) ){
- sqlite3DbFree(p->db, p->zText);
- p->printfFlags &= ~SQLITE_PRINTF_MALLOCED;
- }
- p->zText = 0;
-}
-
-/*
-** Initialize a string accumulator.
-**
-** p: The accumulator to be initialized.
-** db: Pointer to a database connection. May be NULL. Lookaside
-** memory is used if not NULL. db->mallocFailed is set appropriately
-** when not NULL.
-** zBase: An initial buffer. May be NULL in which case the initial buffer
-** is malloced.
-** n: Size of zBase in bytes. If total space requirements never exceed
-** n then no memory allocations ever occur.
-** mx: Maximum number of bytes to accumulate. If mx==0 then no memory
-** allocations will ever occur.
-*/
-SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){
- p->zText = p->zBase = zBase;
- p->db = db;
- p->nChar = 0;
- p->nAlloc = n;
- p->mxAlloc = mx;
- p->accError = 0;
- p->printfFlags = 0;
-}
-
-/*
-** Print into memory obtained from sqliteMalloc(). Use the internal
-** %-conversion extensions.
-*/
-SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3 *db, const char *zFormat, va_list ap){
- char *z;
- char zBase[SQLITE_PRINT_BUF_SIZE];
- StrAccum acc;
- assert( db!=0 );
- sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase),
- db->aLimit[SQLITE_LIMIT_LENGTH]);
- acc.printfFlags = SQLITE_PRINTF_INTERNAL;
- sqlite3VXPrintf(&acc, zFormat, ap);
- z = sqlite3StrAccumFinish(&acc);
- if( acc.accError==STRACCUM_NOMEM ){
- sqlite3OomFault(db);
- }
- return z;
-}
-
-/*
-** Print into memory obtained from sqliteMalloc(). Use the internal
-** %-conversion extensions.
-*/
-SQLITE_PRIVATE char *sqlite3MPrintf(sqlite3 *db, const char *zFormat, ...){
- va_list ap;
- char *z;
- va_start(ap, zFormat);
- z = sqlite3VMPrintf(db, zFormat, ap);
- va_end(ap);
- return z;
-}
-
-/*
-** Print into memory obtained from sqlite3_malloc(). Omit the internal
-** %-conversion extensions.
-*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vmprintf(const char *zFormat, va_list ap){
- char *z;
- char zBase[SQLITE_PRINT_BUF_SIZE];
- StrAccum acc;
-
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( zFormat==0 ){
- (void)SQLITE_MISUSE_BKPT;
- return 0;
- }
-#endif
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH);
- sqlite3VXPrintf(&acc, zFormat, ap);
- z = sqlite3StrAccumFinish(&acc);
- return z;
-}
-
-/*
-** Print into memory obtained from sqlite3_malloc()(). Omit the internal
-** %-conversion extensions.
-*/
-SQLITE_API char *SQLITE_CDECL sqlite3_mprintf(const char *zFormat, ...){
- va_list ap;
- char *z;
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return 0;
-#endif
- va_start(ap, zFormat);
- z = sqlite3_vmprintf(zFormat, ap);
- va_end(ap);
- return z;
-}
-
-/*
-** sqlite3_snprintf() works like snprintf() except that it ignores the
-** current locale settings. This is important for SQLite because we
-** are not able to use a "," as the decimal point in place of "." as
-** specified by some locales.
-**
-** Oops: The first two arguments of sqlite3_snprintf() are backwards
-** from the snprintf() standard. Unfortunately, it is too late to change
-** this without breaking compatibility, so we just have to live with the
-** mistake.
-**
-** sqlite3_vsnprintf() is the varargs version.
-*/
-SQLITE_API char *SQLITE_STDCALL sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_list ap){
- StrAccum acc;
- if( n<=0 ) return zBuf;
-#ifdef SQLITE_ENABLE_API_ARMOR
- if( zBuf==0 || zFormat==0 ) {
- (void)SQLITE_MISUSE_BKPT;
- if( zBuf ) zBuf[0] = 0;
- return zBuf;
- }
-#endif
- sqlite3StrAccumInit(&acc, 0, zBuf, n, 0);
- sqlite3VXPrintf(&acc, zFormat, ap);
- return sqlite3StrAccumFinish(&acc);
-}
-SQLITE_API char *SQLITE_CDECL sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){
- char *z;
- va_list ap;
- va_start(ap,zFormat);
- z = sqlite3_vsnprintf(n, zBuf, zFormat, ap);
- va_end(ap);
- return z;
-}
-
-/*
-** This is the routine that actually formats the sqlite3_log() message.
-** We house it in a separate routine from sqlite3_log() to avoid using
-** stack space on small-stack systems when logging is disabled.
-**
-** sqlite3_log() must render into a static buffer. It cannot dynamically
-** allocate memory because it might be called while the memory allocator
-** mutex is held.
-**
-** sqlite3VXPrintf() might ask for *temporary* memory allocations for
-** certain format characters (%q) or for very large precisions or widths.
-** Care must be taken that any sqlite3_log() calls that occur while the
-** memory mutex is held do not use these mechanisms.
-*/
-static void renderLogMsg(int iErrCode, const char *zFormat, va_list ap){
- StrAccum acc; /* String accumulator */
- char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */
-
- sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0);
- sqlite3VXPrintf(&acc, zFormat, ap);
- sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode,
- sqlite3StrAccumFinish(&acc));
-}
-
-/*
-** Format and write a message to the log if logging is enabled.
-*/
-SQLITE_API void SQLITE_CDECL sqlite3_log(int iErrCode, const char *zFormat, ...){
- va_list ap; /* Vararg list */
- if( sqlite3GlobalConfig.xLog ){
- va_start(ap, zFormat);
- renderLogMsg(iErrCode, zFormat, ap);
- va_end(ap);
- }
-}
-
-#if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE)
-/*
-** A version of printf() that understands %lld. Used for debugging.
-** The printf() built into some versions of windows does not understand %lld
-** and segfaults if you give it a long long int.
-*/
-SQLITE_PRIVATE void sqlite3DebugPrintf(const char *zFormat, ...){
- va_list ap;
- StrAccum acc;
- char zBuf[500];
- sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0);
- va_start(ap,zFormat);
- sqlite3VXPrintf(&acc, zFormat, ap);
- va_end(ap);
- sqlite3StrAccumFinish(&acc);
- fprintf(stdout,"%s", zBuf);
- fflush(stdout);
-}
-#endif
-
-
-/*
-** variable-argument wrapper around sqlite3VXPrintf(). The bFlags argument
-** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats.
-*/
-SQLITE_PRIVATE void sqlite3XPrintf(StrAccum *p, const char *zFormat, ...){
- va_list ap;
- va_start(ap,zFormat);
- sqlite3VXPrintf(p, zFormat, ap);
- va_end(ap);
-}
-
-/************** End of printf.c **********************************************/
-/************** Begin file treeview.c ****************************************/
-/*
-** 2015-06-08
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-**
-** This file contains C code to implement the TreeView debugging routines.
-** These routines print a parse tree to standard output for debugging and
-** analysis.
-**
-** The interfaces in this file is only available when compiling
-** with SQLITE_DEBUG.
-*/
-/* #include "sqliteInt.h" */
-#ifdef SQLITE_DEBUG
-
-/*
-** Add a new subitem to the tree. The moreToFollow flag indicates that this
-** is not the last item in the tree.
-*/
-static TreeView *sqlite3TreeViewPush(TreeView *p, u8 moreToFollow){
- if( p==0 ){
- p = sqlite3_malloc64( sizeof(*p) );
- if( p==0 ) return 0;
- memset(p, 0, sizeof(*p));
- }else{
- p->iLevel++;
- }
- assert( moreToFollow==0 || moreToFollow==1 );
- if( p->iLevelbLine) ) p->bLine[p->iLevel] = moreToFollow;
- return p;
-}
-
-/*
-** Finished with one layer of the tree
-*/
-static void sqlite3TreeViewPop(TreeView *p){
- if( p==0 ) return;
- p->iLevel--;
- if( p->iLevel<0 ) sqlite3_free(p);
-}
-
-/*
-** Generate a single line of output for the tree, with a prefix that contains
-** all the appropriate tree lines
-*/
-static void sqlite3TreeViewLine(TreeView *p, const char *zFormat, ...){
- va_list ap;
- int i;
- StrAccum acc;
- char zBuf[500];
- sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0);
- if( p ){
- for(i=0; iiLevel && ibLine)-1; i++){
- sqlite3StrAccumAppend(&acc, p->bLine[i] ? "| " : " ", 4);
- }
- sqlite3StrAccumAppend(&acc, p->bLine[i] ? "|-- " : "'-- ", 4);
- }
- va_start(ap, zFormat);
- sqlite3VXPrintf(&acc, zFormat, ap);
- va_end(ap);
- if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1);
- sqlite3StrAccumFinish(&acc);
- fprintf(stdout,"%s", zBuf);
- fflush(stdout);
-}
-
-/*
-** Shorthand for starting a new tree item that consists of a single label
-*/
-static void sqlite3TreeViewItem(TreeView *p, const char *zLabel,u8 moreFollows){
- p = sqlite3TreeViewPush(p, moreFollows);
- sqlite3TreeViewLine(p, "%s", zLabel);
-}
-
-/*
-** Generate a human-readable description of a WITH clause.
-*/
-SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView *pView, const With *pWith, u8 moreToFollow){
- int i;
- if( pWith==0 ) return;
- if( pWith->nCte==0 ) return;
- if( pWith->pOuter ){
- sqlite3TreeViewLine(pView, "WITH (0x%p, pOuter=0x%p)",pWith,pWith->pOuter);
- }else{
- sqlite3TreeViewLine(pView, "WITH (0x%p)", pWith);
- }
- if( pWith->nCte>0 ){
- pView = sqlite3TreeViewPush(pView, 1);
- for(i=0; inCte; i++){
- StrAccum x;
- char zLine[1000];
- const struct Cte *pCte = &pWith->a[i];
- sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
- sqlite3XPrintf(&x, "%s", pCte->zName);
- if( pCte->pCols && pCte->pCols->nExpr>0 ){
- char cSep = '(';
- int j;
- for(j=0; jpCols->nExpr; j++){
- sqlite3XPrintf(&x, "%c%s", cSep, pCte->pCols->a[j].zName);
- cSep = ',';
- }
- sqlite3XPrintf(&x, ")");
- }
- sqlite3XPrintf(&x, " AS");
- sqlite3StrAccumFinish(&x);
- sqlite3TreeViewItem(pView, zLine, inCte-1);
- sqlite3TreeViewSelect(pView, pCte->pSelect, 0);
- sqlite3TreeViewPop(pView);
- }
- sqlite3TreeViewPop(pView);
- }
-}
-
-
-/*
-** Generate a human-readable description of a the Select object.
-*/
-SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){
- int n = 0;
- int cnt = 0;
- pView = sqlite3TreeViewPush(pView, moreToFollow);
- if( p->pWith ){
- sqlite3TreeViewWith(pView, p->pWith, 1);
- cnt = 1;
- sqlite3TreeViewPush(pView, 1);
- }
- do{
- sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x nSelectRow=%d",
- ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""),
- ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags,
- (int)p->nSelectRow
- );
- if( cnt++ ) sqlite3TreeViewPop(pView);
- if( p->pPrior ){
- n = 1000;
- }else{
- n = 0;
- if( p->pSrc && p->pSrc->nSrc ) n++;
- if( p->pWhere ) n++;
- if( p->pGroupBy ) n++;
- if( p->pHaving ) n++;
- if( p->pOrderBy ) n++;
- if( p->pLimit ) n++;
- if( p->pOffset ) n++;
- }
- sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set");
- if( p->pSrc && p->pSrc->nSrc ){
- int i;
- pView = sqlite3TreeViewPush(pView, (n--)>0);
- sqlite3TreeViewLine(pView, "FROM");
- for(i=0; ipSrc->nSrc; i++){
- struct SrcList_item *pItem = &p->pSrc->a[i];
- StrAccum x;
- char zLine[100];
- sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0);
- sqlite3XPrintf(&x, "{%d,*}", pItem->iCursor);
- if( pItem->zDatabase ){
- sqlite3XPrintf(&x, " %s.%s", pItem->zDatabase, pItem->zName);
- }else if( pItem->zName ){
- sqlite3XPrintf(&x, " %s", pItem->zName);
- }
- if( pItem->pTab ){
- sqlite3XPrintf(&x, " tabname=%Q", pItem->pTab->zName);
- }
- if( pItem->zAlias ){
- sqlite3XPrintf(&x, " (AS %s)", pItem->zAlias);
- }
- if( pItem->fg.jointype & JT_LEFT ){
- sqlite3XPrintf(&x, " LEFT-JOIN");
- }
- sqlite3StrAccumFinish(&x);
- sqlite3TreeViewItem(pView, zLine, ipSrc->nSrc-1);
- if( pItem->pSelect ){
- sqlite3TreeViewSelect(pView, pItem->pSelect, 0);
- }
- if( pItem->fg.isTabFunc ){
- sqlite3TreeViewExprList(pView, pItem->u1.pFuncArg, 0, "func-args:");
- }
- sqlite3TreeViewPop(pView);
- }
- sqlite3TreeViewPop(pView);
- }
- if( p->pWhere ){
- sqlite3TreeViewItem(pView, "WHERE", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pWhere, 0);
- sqlite3TreeViewPop(pView);
- }
- if( p->pGroupBy ){
- sqlite3TreeViewExprList(pView, p->pGroupBy, (n--)>0, "GROUPBY");
- }
- if( p->pHaving ){
- sqlite3TreeViewItem(pView, "HAVING", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pHaving, 0);
- sqlite3TreeViewPop(pView);
- }
- if( p->pOrderBy ){
- sqlite3TreeViewExprList(pView, p->pOrderBy, (n--)>0, "ORDERBY");
- }
- if( p->pLimit ){
- sqlite3TreeViewItem(pView, "LIMIT", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pLimit, 0);
- sqlite3TreeViewPop(pView);
- }
- if( p->pOffset ){
- sqlite3TreeViewItem(pView, "OFFSET", (n--)>0);
- sqlite3TreeViewExpr(pView, p->pOffset, 0);
- sqlite3TreeViewPop(pView);
- }
- if( p->pPrior ){
- const char *zOp = "UNION";
- switch( p->op ){
- case TK_ALL: zOp = "UNION ALL"; break;
- case TK_INTERSECT: zOp = "INTERSECT"; break;
- case TK_EXCEPT: zOp = "EXCEPT"; break;
- }
- sqlite3TreeViewItem(pView, zOp, 1);
- }
- p = p->pPrior;
- }while( p!=0 );
- sqlite3TreeViewPop(pView);
-}
-
-/*
-** Generate a human-readable explanation of an expression tree.
-*/
-SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){
- const char *zBinOp = 0; /* Binary operator */
- const char *zUniOp = 0; /* Unary operator */
- char zFlgs[30];
- pView = sqlite3TreeViewPush(pView, moreToFollow);
- if( pExpr==0 ){
- sqlite3TreeViewLine(pView, "nil");
- sqlite3TreeViewPop(pView);
- return;
- }
- if( pExpr->flags ){
- sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x",pExpr->flags);
- }else{
- zFlgs[0] = 0;
- }
- switch( pExpr->op ){
- case TK_AGG_COLUMN: {
- sqlite3TreeViewLine(pView, "AGG{%d:%d}%s",
- pExpr->iTable, pExpr->iColumn, zFlgs);
- break;
- }
- case TK_COLUMN: {
- if( pExpr->iTable<0 ){
- /* This only happens when coding check constraints */
- sqlite3TreeViewLine(pView, "COLUMN(%d)%s", pExpr->iColumn, zFlgs);
- }else{
- sqlite3TreeViewLine(pView, "{%d:%d}%s",
- pExpr->iTable, pExpr->iColumn, zFlgs);
- }
- break;
- }
- case TK_INTEGER: {
- if( pExpr->flags & EP_IntValue ){
- sqlite3TreeViewLine(pView, "%d", pExpr->u.iValue);
- }else{
- sqlite3TreeViewLine(pView, "%s", pExpr->u.zToken);
- }
- break;
- }
-#ifndef SQLITE_OMIT_FLOATING_POINT
- case TK_FLOAT: {
- sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken);
- break;
- }
-#endif
- case TK_STRING: {
- sqlite3TreeViewLine(pView,"%Q", pExpr->u.zToken);
- break;
- }
- case TK_NULL: {
- sqlite3TreeViewLine(pView,"NULL");
- break;
- }
-#ifndef SQLITE_OMIT_BLOB_LITERAL
- case TK_BLOB: {
- sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken);
- break;
- }
-#endif
- case TK_VARIABLE: {
- sqlite3TreeViewLine(pView,"VARIABLE(%s,%d)",
- pExpr->u.zToken, pExpr->iColumn);
- break;
- }
- case TK_REGISTER: {
- sqlite3TreeViewLine(pView,"REGISTER(%d)", pExpr->iTable);
- break;
- }
- case TK_ID: {
- sqlite3TreeViewLine(pView,"ID \"%w\"", pExpr->u.zToken);
- break;
- }
-#ifndef SQLITE_OMIT_CAST
- case TK_CAST: {
- /* Expressions of the form: CAST(pLeft AS token) */
- sqlite3TreeViewLine(pView,"CAST %Q", pExpr->u.zToken);
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
- break;
- }
-#endif /* SQLITE_OMIT_CAST */
- case TK_LT: zBinOp = "LT"; break;
- case TK_LE: zBinOp = "LE"; break;
- case TK_GT: zBinOp = "GT"; break;
- case TK_GE: zBinOp = "GE"; break;
- case TK_NE: zBinOp = "NE"; break;
- case TK_EQ: zBinOp = "EQ"; break;
- case TK_IS: zBinOp = "IS"; break;
- case TK_ISNOT: zBinOp = "ISNOT"; break;
- case TK_AND: zBinOp = "AND"; break;
- case TK_OR: zBinOp = "OR"; break;
- case TK_PLUS: zBinOp = "ADD"; break;
- case TK_STAR: zBinOp = "MUL"; break;
- case TK_MINUS: zBinOp = "SUB"; break;
- case TK_REM: zBinOp = "REM"; break;
- case TK_BITAND: zBinOp = "BITAND"; break;
- case TK_BITOR: zBinOp = "BITOR"; break;
- case TK_SLASH: zBinOp = "DIV"; break;
- case TK_LSHIFT: zBinOp = "LSHIFT"; break;
- case TK_RSHIFT: zBinOp = "RSHIFT"; break;
- case TK_CONCAT: zBinOp = "CONCAT"; break;
- case TK_DOT: zBinOp = "DOT"; break;
-
- case TK_UMINUS: zUniOp = "UMINUS"; break;
- case TK_UPLUS: zUniOp = "UPLUS"; break;
- case TK_BITNOT: zUniOp = "BITNOT"; break;
- case TK_NOT: zUniOp = "NOT"; break;
- case TK_ISNULL: zUniOp = "ISNULL"; break;
- case TK_NOTNULL: zUniOp = "NOTNULL"; break;
-
- case TK_SPAN: {
- sqlite3TreeViewLine(pView, "SPAN %Q", pExpr->u.zToken);
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
- break;
- }
-
- case TK_COLLATE: {
- sqlite3TreeViewLine(pView, "COLLATE %Q", pExpr->u.zToken);
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
- break;
- }
-
- case TK_AGG_FUNCTION:
- case TK_FUNCTION: {
- ExprList *pFarg; /* List of function arguments */
- if( ExprHasProperty(pExpr, EP_TokenOnly) ){
- pFarg = 0;
- }else{
- pFarg = pExpr->x.pList;
- }
- if( pExpr->op==TK_AGG_FUNCTION ){
- sqlite3TreeViewLine(pView, "AGG_FUNCTION%d %Q",
- pExpr->op2, pExpr->u.zToken);
- }else{
- sqlite3TreeViewLine(pView, "FUNCTION %Q", pExpr->u.zToken);
- }
- if( pFarg ){
- sqlite3TreeViewExprList(pView, pFarg, 0, 0);
- }
- break;
- }
-#ifndef SQLITE_OMIT_SUBQUERY
- case TK_EXISTS: {
- sqlite3TreeViewLine(pView, "EXISTS-expr");
- sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
- break;
- }
- case TK_SELECT: {
- sqlite3TreeViewLine(pView, "SELECT-expr");
- sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
- break;
- }
- case TK_IN: {
- sqlite3TreeViewLine(pView, "IN");
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 1);
- if( ExprHasProperty(pExpr, EP_xIsSelect) ){
- sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0);
- }else{
- sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0);
- }
- break;
- }
-#endif /* SQLITE_OMIT_SUBQUERY */
-
- /*
- ** x BETWEEN y AND z
- **
- ** This is equivalent to
- **
- ** x>=y AND x<=z
- **
- ** X is stored in pExpr->pLeft.
- ** Y is stored in pExpr->pList->a[0].pExpr.
- ** Z is stored in pExpr->pList->a[1].pExpr.
- */
- case TK_BETWEEN: {
- Expr *pX = pExpr->pLeft;
- Expr *pY = pExpr->x.pList->a[0].pExpr;
- Expr *pZ = pExpr->x.pList->a[1].pExpr;
- sqlite3TreeViewLine(pView, "BETWEEN");
- sqlite3TreeViewExpr(pView, pX, 1);
- sqlite3TreeViewExpr(pView, pY, 1);
- sqlite3TreeViewExpr(pView, pZ, 0);
- break;
- }
- case TK_TRIGGER: {
- /* If the opcode is TK_TRIGGER, then the expression is a reference
- ** to a column in the new.* or old.* pseudo-tables available to
- ** trigger programs. In this case Expr.iTable is set to 1 for the
- ** new.* pseudo-table, or 0 for the old.* pseudo-table. Expr.iColumn
- ** is set to the column of the pseudo-table to read, or to -1 to
- ** read the rowid field.
- */
- sqlite3TreeViewLine(pView, "%s(%d)",
- pExpr->iTable ? "NEW" : "OLD", pExpr->iColumn);
- break;
- }
- case TK_CASE: {
- sqlite3TreeViewLine(pView, "CASE");
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 1);
- sqlite3TreeViewExprList(pView, pExpr->x.pList, 0, 0);
- break;
- }
-#ifndef SQLITE_OMIT_TRIGGER
- case TK_RAISE: {
- const char *zType = "unk";
- switch( pExpr->affinity ){
- case OE_Rollback: zType = "rollback"; break;
- case OE_Abort: zType = "abort"; break;
- case OE_Fail: zType = "fail"; break;
- case OE_Ignore: zType = "ignore"; break;
- }
- sqlite3TreeViewLine(pView, "RAISE %s(%Q)", zType, pExpr->u.zToken);
- break;
- }
-#endif
- default: {
- sqlite3TreeViewLine(pView, "op=%d", pExpr->op);
- break;
- }
- }
- if( zBinOp ){
- sqlite3TreeViewLine(pView, "%s%s", zBinOp, zFlgs);
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 1);
- sqlite3TreeViewExpr(pView, pExpr->pRight, 0);
- }else if( zUniOp ){
- sqlite3TreeViewLine(pView, "%s%s", zUniOp, zFlgs);
- sqlite3TreeViewExpr(pView, pExpr->pLeft, 0);
- }
- sqlite3TreeViewPop(pView);
-}
-
-/*
-** Generate a human-readable explanation of an expression list.
-*/
-SQLITE_PRIVATE void sqlite3TreeViewExprList(
- TreeView *pView,
- const ExprList *pList,
- u8 moreToFollow,
- const char *zLabel
-){
- int i;
- pView = sqlite3TreeViewPush(pView, moreToFollow);
- if( zLabel==0 || zLabel[0]==0 ) zLabel = "LIST";
- if( pList==0 ){
- sqlite3TreeViewLine(pView, "%s (empty)", zLabel);
- }else{
- sqlite3TreeViewLine(pView, "%s", zLabel);
- for(i=0; inExpr; i++){
- int j = pList->a[i].u.x.iOrderByCol;
- if( j ){
- sqlite3TreeViewPush(pView, 0);
- sqlite3TreeViewLine(pView, "iOrderByCol=%d", j);
- }
- sqlite3TreeViewExpr(pView, pList->a[i].pExpr, inExpr-1);
- if( j ) sqlite3TreeViewPop(pView);
- }
- }
- sqlite3TreeViewPop(pView);
-}
-
-#endif /* SQLITE_DEBUG */
-
-/************** End of treeview.c ********************************************/
-/************** Begin file random.c ******************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains code to implement a pseudo-random number
-** generator (PRNG) for SQLite.
-**
-** Random numbers are used by some of the database backends in order
-** to generate random integer keys for tables or random filenames.
-*/
-/* #include "sqliteInt.h" */
-
-
-/* All threads share a single random number generator.
-** This structure is the current state of the generator.
-*/
-static SQLITE_WSD struct sqlite3PrngType {
- unsigned char isInit; /* True if initialized */
- unsigned char i, j; /* State variables */
- unsigned char s[256]; /* State variables */
-} sqlite3Prng;
-
-/*
-** Return N random bytes.
-*/
-SQLITE_API void SQLITE_STDCALL sqlite3_randomness(int N, void *pBuf){
- unsigned char t;
- unsigned char *zBuf = pBuf;
-
- /* The "wsdPrng" macro will resolve to the pseudo-random number generator
- ** state vector. If writable static data is unsupported on the target,
- ** we have to locate the state vector at run-time. In the more common
- ** case where writable static data is supported, wsdPrng can refer directly
- ** to the "sqlite3Prng" state vector declared above.
- */
-#ifdef SQLITE_OMIT_WSD
- struct sqlite3PrngType *p = &GLOBAL(struct sqlite3PrngType, sqlite3Prng);
-# define wsdPrng p[0]
-#else
-# define wsdPrng sqlite3Prng
-#endif
-
-#if SQLITE_THREADSAFE
- sqlite3_mutex *mutex;
-#endif
-
-#ifndef SQLITE_OMIT_AUTOINIT
- if( sqlite3_initialize() ) return;
-#endif
-
-#if SQLITE_THREADSAFE
- mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_PRNG);
-#endif
-
- sqlite3_mutex_enter(mutex);
- if( N<=0 || pBuf==0 ){
- wsdPrng.isInit = 0;
- sqlite3_mutex_leave(mutex);
- return;
- }
-
- /* Initialize the state of the random number generator once,
- ** the first time this routine is called. The seed value does
- ** not need to contain a lot of randomness since we are not
- ** trying to do secure encryption or anything like that...
- **
- ** Nothing in this file or anywhere else in SQLite does any kind of
- ** encryption. The RC4 algorithm is being used as a PRNG (pseudo-random
- ** number generator) not as an encryption device.
- */
- if( !wsdPrng.isInit ){
- int i;
- char k[256];
- wsdPrng.j = 0;
- wsdPrng.i = 0;
- sqlite3OsRandomness(sqlite3_vfs_find(0), 256, k);
- for(i=0; i<256; i++){
- wsdPrng.s[i] = (u8)i;
- }
- for(i=0; i<256; i++){
- wsdPrng.j += wsdPrng.s[i] + k[i];
- t = wsdPrng.s[wsdPrng.j];
- wsdPrng.s[wsdPrng.j] = wsdPrng.s[i];
- wsdPrng.s[i] = t;
- }
- wsdPrng.isInit = 1;
- }
-
- assert( N>0 );
- do{
- wsdPrng.i++;
- t = wsdPrng.s[wsdPrng.i];
- wsdPrng.j += t;
- wsdPrng.s[wsdPrng.i] = wsdPrng.s[wsdPrng.j];
- wsdPrng.s[wsdPrng.j] = t;
- t += wsdPrng.s[wsdPrng.i];
- *(zBuf++) = wsdPrng.s[t];
- }while( --N );
- sqlite3_mutex_leave(mutex);
-}
-
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-/*
-** For testing purposes, we sometimes want to preserve the state of
-** PRNG and restore the PRNG to its saved state at a later time, or
-** to reset the PRNG to its initial state. These routines accomplish
-** those tasks.
-**
-** The sqlite3_test_control() interface calls these routines to
-** control the PRNG.
-*/
-static SQLITE_WSD struct sqlite3PrngType sqlite3SavedPrng;
-SQLITE_PRIVATE void sqlite3PrngSaveState(void){
- memcpy(
- &GLOBAL(struct sqlite3PrngType, sqlite3SavedPrng),
- &GLOBAL(struct sqlite3PrngType, sqlite3Prng),
- sizeof(sqlite3Prng)
- );
-}
-SQLITE_PRIVATE void sqlite3PrngRestoreState(void){
- memcpy(
- &GLOBAL(struct sqlite3PrngType, sqlite3Prng),
- &GLOBAL(struct sqlite3PrngType, sqlite3SavedPrng),
- sizeof(sqlite3Prng)
- );
-}
-#endif /* SQLITE_OMIT_BUILTIN_TEST */
-
-/************** End of random.c **********************************************/
-/************** Begin file threads.c *****************************************/
-/*
-** 2012 July 21
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file presents a simple cross-platform threading interface for
-** use internally by SQLite.
-**
-** A "thread" can be created using sqlite3ThreadCreate(). This thread
-** runs independently of its creator until it is joined using
-** sqlite3ThreadJoin(), at which point it terminates.
-**
-** Threads do not have to be real. It could be that the work of the
-** "thread" is done by the main thread at either the sqlite3ThreadCreate()
-** or sqlite3ThreadJoin() call. This is, in fact, what happens in
-** single threaded systems. Nothing in SQLite requires multiple threads.
-** This interface exists so that applications that want to take advantage
-** of multiple cores can do so, while also allowing applications to stay
-** single-threaded if desired.
-*/
-/* #include "sqliteInt.h" */
-#if SQLITE_OS_WIN
-/* # include "os_win.h" */
-#endif
-
-#if SQLITE_MAX_WORKER_THREADS>0
-
-/********************************* Unix Pthreads ****************************/
-#if SQLITE_OS_UNIX && defined(SQLITE_MUTEX_PTHREADS) && SQLITE_THREADSAFE>0
-
-#define SQLITE_THREADS_IMPLEMENTED 1 /* Prevent the single-thread code below */
-/* #include */
-
-/* A running thread */
-struct SQLiteThread {
- pthread_t tid; /* Thread ID */
- int done; /* Set to true when thread finishes */
- void *pOut; /* Result returned by the thread */
- void *(*xTask)(void*); /* The thread routine */
- void *pIn; /* Argument to the thread */
-};
-
-/* Create a new thread */
-SQLITE_PRIVATE int sqlite3ThreadCreate(
- SQLiteThread **ppThread, /* OUT: Write the thread object here */
- void *(*xTask)(void*), /* Routine to run in a separate thread */
- void *pIn /* Argument passed into xTask() */
-){
- SQLiteThread *p;
- int rc;
-
- assert( ppThread!=0 );
- assert( xTask!=0 );
- /* This routine is never used in single-threaded mode */
- assert( sqlite3GlobalConfig.bCoreMutex!=0 );
-
- *ppThread = 0;
- p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM_BKPT;
- memset(p, 0, sizeof(*p));
- p->xTask = xTask;
- p->pIn = pIn;
- /* If the SQLITE_TESTCTRL_FAULT_INSTALL callback is registered to a
- ** function that returns SQLITE_ERROR when passed the argument 200, that
- ** forces worker threads to run sequentially and deterministically
- ** for testing purposes. */
- if( sqlite3FaultSim(200) ){
- rc = 1;
- }else{
- rc = pthread_create(&p->tid, 0, xTask, pIn);
- }
- if( rc ){
- p->done = 1;
- p->pOut = xTask(pIn);
- }
- *ppThread = p;
- return SQLITE_OK;
-}
-
-/* Get the results of the thread */
-SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){
- int rc;
-
- assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
- if( p->done ){
- *ppOut = p->pOut;
- rc = SQLITE_OK;
- }else{
- rc = pthread_join(p->tid, ppOut) ? SQLITE_ERROR : SQLITE_OK;
- }
- sqlite3_free(p);
- return rc;
-}
-
-#endif /* SQLITE_OS_UNIX && defined(SQLITE_MUTEX_PTHREADS) */
-/******************************** End Unix Pthreads *************************/
-
-
-/********************************* Win32 Threads ****************************/
-#if SQLITE_OS_WIN_THREADS
-
-#define SQLITE_THREADS_IMPLEMENTED 1 /* Prevent the single-thread code below */
-#include
-
-/* A running thread */
-struct SQLiteThread {
- void *tid; /* The thread handle */
- unsigned id; /* The thread identifier */
- void *(*xTask)(void*); /* The routine to run as a thread */
- void *pIn; /* Argument to xTask */
- void *pResult; /* Result of xTask */
-};
-
-/* Thread procedure Win32 compatibility shim */
-static unsigned __stdcall sqlite3ThreadProc(
- void *pArg /* IN: Pointer to the SQLiteThread structure */
-){
- SQLiteThread *p = (SQLiteThread *)pArg;
-
- assert( p!=0 );
-#if 0
- /*
- ** This assert appears to trigger spuriously on certain
- ** versions of Windows, possibly due to _beginthreadex()
- ** and/or CreateThread() not fully setting their thread
- ** ID parameter before starting the thread.
- */
- assert( p->id==GetCurrentThreadId() );
-#endif
- assert( p->xTask!=0 );
- p->pResult = p->xTask(p->pIn);
-
- _endthreadex(0);
- return 0; /* NOT REACHED */
-}
-
-/* Create a new thread */
-SQLITE_PRIVATE int sqlite3ThreadCreate(
- SQLiteThread **ppThread, /* OUT: Write the thread object here */
- void *(*xTask)(void*), /* Routine to run in a separate thread */
- void *pIn /* Argument passed into xTask() */
-){
- SQLiteThread *p;
-
- assert( ppThread!=0 );
- assert( xTask!=0 );
- *ppThread = 0;
- p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM_BKPT;
- /* If the SQLITE_TESTCTRL_FAULT_INSTALL callback is registered to a
- ** function that returns SQLITE_ERROR when passed the argument 200, that
- ** forces worker threads to run sequentially and deterministically
- ** (via the sqlite3FaultSim() term of the conditional) for testing
- ** purposes. */
- if( sqlite3GlobalConfig.bCoreMutex==0 || sqlite3FaultSim(200) ){
- memset(p, 0, sizeof(*p));
- }else{
- p->xTask = xTask;
- p->pIn = pIn;
- p->tid = (void*)_beginthreadex(0, 0, sqlite3ThreadProc, p, 0, &p->id);
- if( p->tid==0 ){
- memset(p, 0, sizeof(*p));
- }
- }
- if( p->xTask==0 ){
- p->id = GetCurrentThreadId();
- p->pResult = xTask(pIn);
- }
- *ppThread = p;
- return SQLITE_OK;
-}
-
-SQLITE_PRIVATE DWORD sqlite3Win32Wait(HANDLE hObject); /* os_win.c */
-
-/* Get the results of the thread */
-SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){
- DWORD rc;
- BOOL bRc;
-
- assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
- if( p->xTask==0 ){
- /* assert( p->id==GetCurrentThreadId() ); */
- rc = WAIT_OBJECT_0;
- assert( p->tid==0 );
- }else{
- assert( p->id!=0 && p->id!=GetCurrentThreadId() );
- rc = sqlite3Win32Wait((HANDLE)p->tid);
- assert( rc!=WAIT_IO_COMPLETION );
- bRc = CloseHandle((HANDLE)p->tid);
- assert( bRc );
- }
- if( rc==WAIT_OBJECT_0 ) *ppOut = p->pResult;
- sqlite3_free(p);
- return (rc==WAIT_OBJECT_0) ? SQLITE_OK : SQLITE_ERROR;
-}
-
-#endif /* SQLITE_OS_WIN_THREADS */
-/******************************** End Win32 Threads *************************/
-
-
-/********************************* Single-Threaded **************************/
-#ifndef SQLITE_THREADS_IMPLEMENTED
-/*
-** This implementation does not actually create a new thread. It does the
-** work of the thread in the main thread, when either the thread is created
-** or when it is joined
-*/
-
-/* A running thread */
-struct SQLiteThread {
- void *(*xTask)(void*); /* The routine to run as a thread */
- void *pIn; /* Argument to xTask */
- void *pResult; /* Result of xTask */
-};
-
-/* Create a new thread */
-SQLITE_PRIVATE int sqlite3ThreadCreate(
- SQLiteThread **ppThread, /* OUT: Write the thread object here */
- void *(*xTask)(void*), /* Routine to run in a separate thread */
- void *pIn /* Argument passed into xTask() */
-){
- SQLiteThread *p;
-
- assert( ppThread!=0 );
- assert( xTask!=0 );
- *ppThread = 0;
- p = sqlite3Malloc(sizeof(*p));
- if( p==0 ) return SQLITE_NOMEM_BKPT;
- if( (SQLITE_PTR_TO_INT(p)/17)&1 ){
- p->xTask = xTask;
- p->pIn = pIn;
- }else{
- p->xTask = 0;
- p->pResult = xTask(pIn);
- }
- *ppThread = p;
- return SQLITE_OK;
-}
-
-/* Get the results of the thread */
-SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread *p, void **ppOut){
-
- assert( ppOut!=0 );
- if( NEVER(p==0) ) return SQLITE_NOMEM_BKPT;
- if( p->xTask ){
- *ppOut = p->xTask(p->pIn);
- }else{
- *ppOut = p->pResult;
- }
- sqlite3_free(p);
-
-#if defined(SQLITE_TEST)
- {
- void *pTstAlloc = sqlite3Malloc(10);
- if (!pTstAlloc) return SQLITE_NOMEM_BKPT;
- sqlite3_free(pTstAlloc);
- }
-#endif
-
- return SQLITE_OK;
-}
-
-#endif /* !defined(SQLITE_THREADS_IMPLEMENTED) */
-/****************************** End Single-Threaded *************************/
-#endif /* SQLITE_MAX_WORKER_THREADS>0 */
-
-/************** End of threads.c *********************************************/
-/************** Begin file utf.c *********************************************/
-/*
-** 2004 April 13
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This file contains routines used to translate between UTF-8,
-** UTF-16, UTF-16BE, and UTF-16LE.
-**
-** Notes on UTF-8:
-**
-** Byte-0 Byte-1 Byte-2 Byte-3 Value
-** 0xxxxxxx 00000000 00000000 0xxxxxxx
-** 110yyyyy 10xxxxxx 00000000 00000yyy yyxxxxxx
-** 1110zzzz 10yyyyyy 10xxxxxx 00000000 zzzzyyyy yyxxxxxx
-** 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx 000uuuuu zzzzyyyy yyxxxxxx
-**
-**
-** Notes on UTF-16: (with wwww+1==uuuuu)
-**
-** Word-0 Word-1 Value
-** 110110ww wwzzzzyy 110111yy yyxxxxxx 000uuuuu zzzzyyyy yyxxxxxx
-** zzzzyyyy yyxxxxxx 00000000 zzzzyyyy yyxxxxxx
-**
-**
-** BOM or Byte Order Mark:
-** 0xff 0xfe little-endian utf-16 follows
-** 0xfe 0xff big-endian utf-16 follows
-**
-*/
-/* #include "sqliteInt.h" */
-/* #include */
-/* #include "vdbeInt.h" */
-
-#if !defined(SQLITE_AMALGAMATION) && SQLITE_BYTEORDER==0
-/*
-** The following constant value is used by the SQLITE_BIGENDIAN and
-** SQLITE_LITTLEENDIAN macros.
-*/
-SQLITE_PRIVATE const int sqlite3one = 1;
-#endif /* SQLITE_AMALGAMATION && SQLITE_BYTEORDER==0 */
-
-/*
-** This lookup table is used to help decode the first byte of
-** a multi-byte UTF8 character.
-*/
-static const unsigned char sqlite3Utf8Trans1[] = {
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
- 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
- 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
- 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
- 0x00, 0x01, 0x02, 0x03, 0x00, 0x01, 0x00, 0x00,
-};
-
-
-#define WRITE_UTF8(zOut, c) { \
- if( c<0x00080 ){ \
- *zOut++ = (u8)(c&0xFF); \
- } \
- else if( c<0x00800 ){ \
- *zOut++ = 0xC0 + (u8)((c>>6)&0x1F); \
- *zOut++ = 0x80 + (u8)(c & 0x3F); \
- } \
- else if( c<0x10000 ){ \
- *zOut++ = 0xE0 + (u8)((c>>12)&0x0F); \
- *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); \
- *zOut++ = 0x80 + (u8)(c & 0x3F); \
- }else{ \
- *zOut++ = 0xF0 + (u8)((c>>18) & 0x07); \
- *zOut++ = 0x80 + (u8)((c>>12) & 0x3F); \
- *zOut++ = 0x80 + (u8)((c>>6) & 0x3F); \
- *zOut++ = 0x80 + (u8)(c & 0x3F); \
- } \
-}
-
-#define WRITE_UTF16LE(zOut, c) { \
- if( c<=0xFFFF ){ \
- *zOut++ = (u8)(c&0x00FF); \
- *zOut++ = (u8)((c>>8)&0x00FF); \
- }else{ \
- *zOut++ = (u8)(((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0)); \
- *zOut++ = (u8)(0x00D8 + (((c-0x10000)>>18)&0x03)); \
- *zOut++ = (u8)(c&0x00FF); \
- *zOut++ = (u8)(0x00DC + ((c>>8)&0x03)); \
- } \
-}
-
-#define WRITE_UTF16BE(zOut, c) { \
- if( c<=0xFFFF ){ \
- *zOut++ = (u8)((c>>8)&0x00FF); \
- *zOut++ = (u8)(c&0x00FF); \
- }else{ \
- *zOut++ = (u8)(0x00D8 + (((c-0x10000)>>18)&0x03)); \
- *zOut++ = (u8)(((c>>10)&0x003F) + (((c-0x10000)>>10)&0x00C0)); \
- *zOut++ = (u8)(0x00DC + ((c>>8)&0x03)); \
- *zOut++ = (u8)(c&0x00FF); \
- } \
-}
-
-#define READ_UTF16LE(zIn, TERM, c){ \
- c = (*zIn++); \
- c += ((*zIn++)<<8); \
- if( c>=0xD800 && c<0xE000 && TERM ){ \
- int c2 = (*zIn++); \
- c2 += ((*zIn++)<<8); \
- c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10); \
- } \
-}
-
-#define READ_UTF16BE(zIn, TERM, c){ \
- c = ((*zIn++)<<8); \
- c += (*zIn++); \
- if( c>=0xD800 && c<0xE000 && TERM ){ \
- int c2 = ((*zIn++)<<8); \
- c2 += (*zIn++); \
- c = (c2&0x03FF) + ((c&0x003F)<<10) + (((c&0x03C0)+0x0040)<<10); \
- } \
-}
-
-/*
-** Translate a single UTF-8 character. Return the unicode value.
-**
-** During translation, assume that the byte that zTerm points
-** is a 0x00.
-**
-** Write a pointer to the next unread byte back into *pzNext.
-**
-** Notes On Invalid UTF-8:
-**
-** * This routine never allows a 7-bit character (0x00 through 0x7f) to
-** be encoded as a multi-byte character. Any multi-byte character that
-** attempts to encode a value between 0x00 and 0x7f is rendered as 0xfffd.
-**
-** * This routine never allows a UTF16 surrogate value to be encoded.
-** If a multi-byte character attempts to encode a value between
-** 0xd800 and 0xe000 then it is rendered as 0xfffd.
-**
-** * Bytes in the range of 0x80 through 0xbf which occur as the first
-** byte of a character are interpreted as single-byte characters
-** and rendered as themselves even though they are technically
-** invalid characters.
-**
-** * This routine accepts over-length UTF8 encodings
-** for unicode values 0x80 and greater. It does not change over-length
-** encodings to 0xfffd as some systems recommend.
-*/
-#define READ_UTF8(zIn, zTerm, c) \
- c = *(zIn++); \
- if( c>=0xc0 ){ \
- c = sqlite3Utf8Trans1[c-0xc0]; \
- while( zIn!=zTerm && (*zIn & 0xc0)==0x80 ){ \
- c = (c<<6) + (0x3f & *(zIn++)); \
- } \
- if( c<0x80 \
- || (c&0xFFFFF800)==0xD800 \
- || (c&0xFFFFFFFE)==0xFFFE ){ c = 0xFFFD; } \
- }
-SQLITE_PRIVATE u32 sqlite3Utf8Read(
- const unsigned char **pz /* Pointer to string from which to read char */
-){
- unsigned int c;
-
- /* Same as READ_UTF8() above but without the zTerm parameter.
- ** For this routine, we assume the UTF8 string is always zero-terminated.
- */
- c = *((*pz)++);
- if( c>=0xc0 ){
- c = sqlite3Utf8Trans1[c-0xc0];
- while( (*(*pz) & 0xc0)==0x80 ){
- c = (c<<6) + (0x3f & *((*pz)++));
- }
- if( c<0x80
- || (c&0xFFFFF800)==0xD800
- || (c&0xFFFFFFFE)==0xFFFE ){ c = 0xFFFD; }
- }
- return c;
-}
-
-
-
-
-/*
-** If the TRANSLATE_TRACE macro is defined, the value of each Mem is
-** printed on stderr on the way into and out of sqlite3VdbeMemTranslate().
-*/
-/* #define TRANSLATE_TRACE 1 */
-
-#ifndef SQLITE_OMIT_UTF16
-/*
-** This routine transforms the internal text encoding used by pMem to
-** desiredEnc. It is an error if the string is already of the desired
-** encoding, or if *pMem does not contain a string value.
-*/
-SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemTranslate(Mem *pMem, u8 desiredEnc){
- int len; /* Maximum length of output string in bytes */
- unsigned char *zOut; /* Output buffer */
- unsigned char *zIn; /* Input iterator */
- unsigned char *zTerm; /* End of input */
- unsigned char *z; /* Output iterator */
- unsigned int c;
-
- assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) );
- assert( pMem->flags&MEM_Str );
- assert( pMem->enc!=desiredEnc );
- assert( pMem->enc!=0 );
- assert( pMem->n>=0 );
-
-#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
- {
- char zBuf[100];
- sqlite3VdbeMemPrettyPrint(pMem, zBuf);
- fprintf(stderr, "INPUT: %s\n", zBuf);
- }
-#endif
-
- /* If the translation is between UTF-16 little and big endian, then
- ** all that is required is to swap the byte order. This case is handled
- ** differently from the others.
- */
- if( pMem->enc!=SQLITE_UTF8 && desiredEnc!=SQLITE_UTF8 ){
- u8 temp;
- int rc;
- rc = sqlite3VdbeMemMakeWriteable(pMem);
- if( rc!=SQLITE_OK ){
- assert( rc==SQLITE_NOMEM );
- return SQLITE_NOMEM_BKPT;
- }
- zIn = (u8*)pMem->z;
- zTerm = &zIn[pMem->n&~1];
- while( zInenc = desiredEnc;
- goto translate_out;
- }
-
- /* Set len to the maximum number of bytes required in the output buffer. */
- if( desiredEnc==SQLITE_UTF8 ){
- /* When converting from UTF-16, the maximum growth results from
- ** translating a 2-byte character to a 4-byte UTF-8 character.
- ** A single byte is required for the output string
- ** nul-terminator.
- */
- pMem->n &= ~1;
- len = pMem->n * 2 + 1;
- }else{
- /* When converting from UTF-8 to UTF-16 the maximum growth is caused
- ** when a 1-byte UTF-8 character is translated into a 2-byte UTF-16
- ** character. Two bytes are required in the output buffer for the
- ** nul-terminator.
- */
- len = pMem->n * 2 + 2;
- }
-
- /* Set zIn to point at the start of the input buffer and zTerm to point 1
- ** byte past the end.
- **
- ** Variable zOut is set to point at the output buffer, space obtained
- ** from sqlite3_malloc().
- */
- zIn = (u8*)pMem->z;
- zTerm = &zIn[pMem->n];
- zOut = sqlite3DbMallocRaw(pMem->db, len);
- if( !zOut ){
- return SQLITE_NOMEM_BKPT;
- }
- z = zOut;
-
- if( pMem->enc==SQLITE_UTF8 ){
- if( desiredEnc==SQLITE_UTF16LE ){
- /* UTF-8 -> UTF-16 Little-endian */
- while( zIn UTF-16 Big-endian */
- while( zInn = (int)(z - zOut);
- *z++ = 0;
- }else{
- assert( desiredEnc==SQLITE_UTF8 );
- if( pMem->enc==SQLITE_UTF16LE ){
- /* UTF-16 Little-endian -> UTF-8 */
- while( zIn UTF-8 */
- while( zInn = (int)(z - zOut);
- }
- *z = 0;
- assert( (pMem->n+(desiredEnc==SQLITE_UTF8?1:2))<=len );
-
- c = pMem->flags;
- sqlite3VdbeMemRelease(pMem);
- pMem->flags = MEM_Str|MEM_Term|(c&(MEM_AffMask|MEM_Subtype));
- pMem->enc = desiredEnc;
- pMem->z = (char*)zOut;
- pMem->zMalloc = pMem->z;
- pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->z);
-
-translate_out:
-#if defined(TRANSLATE_TRACE) && defined(SQLITE_DEBUG)
- {
- char zBuf[100];
- sqlite3VdbeMemPrettyPrint(pMem, zBuf);
- fprintf(stderr, "OUTPUT: %s\n", zBuf);
- }
-#endif
- return SQLITE_OK;
-}
-
-/*
-** This routine checks for a byte-order mark at the beginning of the
-** UTF-16 string stored in *pMem. If one is present, it is removed and
-** the encoding of the Mem adjusted. This routine does not do any
-** byte-swapping, it just sets Mem.enc appropriately.
-**
-** The allocation (static, dynamic etc.) and encoding of the Mem may be
-** changed by this function.
-*/
-SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem){
- int rc = SQLITE_OK;
- u8 bom = 0;
-
- assert( pMem->n>=0 );
- if( pMem->n>1 ){
- u8 b1 = *(u8 *)pMem->z;
- u8 b2 = *(((u8 *)pMem->z) + 1);
- if( b1==0xFE && b2==0xFF ){
- bom = SQLITE_UTF16BE;
- }
- if( b1==0xFF && b2==0xFE ){
- bom = SQLITE_UTF16LE;
- }
- }
-
- if( bom ){
- rc = sqlite3VdbeMemMakeWriteable(pMem);
- if( rc==SQLITE_OK ){
- pMem->n -= 2;
- memmove(pMem->z, &pMem->z[2], pMem->n);
- pMem->z[pMem->n] = '\0';
- pMem->z[pMem->n+1] = '\0';
- pMem->flags |= MEM_Term;
- pMem->enc = bom;
- }
- }
- return rc;
-}
-#endif /* SQLITE_OMIT_UTF16 */
-
-/*
-** pZ is a UTF-8 encoded unicode string. If nByte is less than zero,
-** return the number of unicode characters in pZ up to (but not including)
-** the first 0x00 byte. If nByte is not less than zero, return the
-** number of unicode characters in the first nByte of pZ (or up to
-** the first 0x00, whichever comes first).
-*/
-SQLITE_PRIVATE int sqlite3Utf8CharLen(const char *zIn, int nByte){
- int r = 0;
- const u8 *z = (const u8*)zIn;
- const u8 *zTerm;
- if( nByte>=0 ){
- zTerm = &z[nByte];
- }else{
- zTerm = (const u8*)(-1);
- }
- assert( z<=zTerm );
- while( *z!=0 && zmallocFailed ){
- sqlite3VdbeMemRelease(&m);
- m.z = 0;
- }
- assert( (m.flags & MEM_Term)!=0 || db->mallocFailed );
- assert( (m.flags & MEM_Str)!=0 || db->mallocFailed );
- assert( m.z || db->mallocFailed );
- return m.z;
-}
-
-/*
-** zIn is a UTF-16 encoded unicode string at least nChar characters long.
-** Return the number of bytes in the first nChar unicode characters
-** in pZ. nChar must be non-negative.
-*/
-SQLITE_PRIVATE int sqlite3Utf16ByteLen(const void *zIn, int nChar){
- int c;
- unsigned char const *z = zIn;
- int n = 0;
-
- if( SQLITE_UTF16NATIVE==SQLITE_UTF16BE ){
- while( n0 && n<=4 );
- z[0] = 0;
- z = zBuf;
- c = sqlite3Utf8Read((const u8**)&z);
- t = i;
- if( i>=0xD800 && i<=0xDFFF ) t = 0xFFFD;
- if( (i&0xFFFFFFFE)==0xFFFE ) t = 0xFFFD;
- assert( c==t );
- assert( (z-zBuf)==n );
- }
- for(i=0; i<0x00110000; i++){
- if( i>=0xD800 && i<0xE000 ) continue;
- z = zBuf;
- WRITE_UTF16LE(z, i);
- n = (int)(z-zBuf);
- assert( n>0 && n<=4 );
- z[0] = 0;
- z = zBuf;
- READ_UTF16LE(z, 1, c);
- assert( c==i );
- assert( (z-zBuf)==n );
- }
- for(i=0; i<0x00110000; i++){
- if( i>=0xD800 && i<0xE000 ) continue;
- z = zBuf;
- WRITE_UTF16BE(z, i);
- n = (int)(z-zBuf);
- assert( n>0 && n<=4 );
- z[0] = 0;
- z = zBuf;
- READ_UTF16BE(z, 1, c);
- assert( c==i );
- assert( (z-zBuf)==n );
- }
-}
-#endif /* SQLITE_TEST */
-#endif /* SQLITE_OMIT_UTF16 */
-
-/************** End of utf.c *************************************************/
-/************** Begin file util.c ********************************************/
-/*
-** 2001 September 15
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** Utility functions used throughout sqlite.
-**
-** This file contains functions for allocating memory, comparing
-** strings, and stuff like that.
-**
-*/
-/* #include "sqliteInt.h" */
-/* #include */
-#if HAVE_ISNAN || SQLITE_HAVE_ISNAN
-# include
-#endif
-
-/*
-** Routine needed to support the testcase() macro.
-*/
-#ifdef SQLITE_COVERAGE_TEST
-SQLITE_PRIVATE void sqlite3Coverage(int x){
- static unsigned dummy = 0;
- dummy += (unsigned)x;
-}
-#endif
-
-/*
-** Give a callback to the test harness that can be used to simulate faults
-** in places where it is difficult or expensive to do so purely by means
-** of inputs.
-**
-** The intent of the integer argument is to let the fault simulator know
-** which of multiple sqlite3FaultSim() calls has been hit.
-**
-** Return whatever integer value the test callback returns, or return
-** SQLITE_OK if no test callback is installed.
-*/
-#ifndef SQLITE_OMIT_BUILTIN_TEST
-SQLITE_PRIVATE int sqlite3FaultSim(int iTest){
- int (*xCallback)(int) = sqlite3GlobalConfig.xTestCallback;
- return xCallback ? xCallback(iTest) : SQLITE_OK;
-}
-#endif
-
-#ifndef SQLITE_OMIT_FLOATING_POINT
-/*
-** Return true if the floating point value is Not a Number (NaN).
-**
-** Use the math library isnan() function if compiled with SQLITE_HAVE_ISNAN.
-** Otherwise, we have our own implementation that works on most systems.
-*/
-SQLITE_PRIVATE int sqlite3IsNaN(double x){
- int rc; /* The value return */
-#if !SQLITE_HAVE_ISNAN && !HAVE_ISNAN
- /*
- ** Systems that support the isnan() library function should probably
- ** make use of it by compiling with -DSQLITE_HAVE_ISNAN. But we have
- ** found that many systems do not have a working isnan() function so
- ** this implementation is provided as an alternative.
- **
- ** This NaN test sometimes fails if compiled on GCC with -ffast-math.
- ** On the other hand, the use of -ffast-math comes with the following
- ** warning:
- **
- ** This option [-ffast-math] should never be turned on by any
- ** -O option since it can result in incorrect output for programs
- ** which depend on an exact implementation of IEEE or ISO
- ** rules/specifications for math functions.
- **
- ** Under MSVC, this NaN test may fail if compiled with a floating-
- ** point precision mode other than /fp:precise. From the MSDN
- ** documentation:
- **
- ** The compiler [with /fp:precise] will properly handle comparisons
- ** involving NaN. For example, x != x evaluates to true if x is NaN
- ** ...
- */
-#ifdef __FAST_MATH__
-# error SQLite will not work correctly with the -ffast-math option of GCC.
-#endif
- volatile double y = x;
- volatile double z = y;
- rc = (y!=z);
-#else /* if HAVE_ISNAN */
- rc = isnan(x);
-#endif /* HAVE_ISNAN */
- testcase( rc );
- return rc;
-}
-#endif /* SQLITE_OMIT_FLOATING_POINT */
-
-/*
-** Compute a string length that is limited to what can be stored in
-** lower 30 bits of a 32-bit signed integer.
-**
-** The value returned will never be negative. Nor will it ever be greater
-** than the actual length of the string. For very long strings (greater
-** than 1GiB) the value returned might be less than the true string length.
-*/
-SQLITE_PRIVATE int sqlite3Strlen30(const char *z){
- if( z==0 ) return 0;
- return 0x3fffffff & (int)strlen(z);
-}
-
-/*
-** Return the declared type of a column. Or return zDflt if the column
-** has no declared type.
-**
-** The column type is an extra string stored after the zero-terminator on
-** the column name if and only if the COLFLAG_HASTYPE flag is set.
-*/
-SQLITE_PRIVATE char *sqlite3ColumnType(Column *pCol, char *zDflt){
- if( (pCol->colFlags & COLFLAG_HASTYPE)==0 ) return zDflt;
- return pCol->zName + strlen(pCol->zName) + 1;
-}
-
-/*
-** Helper function for sqlite3Error() - called rarely. Broken out into
-** a separate routine to avoid unnecessary register saves on entry to
-** sqlite3Error().
-*/
-static SQLITE_NOINLINE void sqlite3ErrorFinish(sqlite3 *db, int err_code){
- if( db->pErr ) sqlite3ValueSetNull(db->pErr);
- sqlite3SystemError(db, err_code);
-}
-
-/*
-** Set the current error code to err_code and clear any prior error message.
-** Also set iSysErrno (by calling sqlite3System) if the err_code indicates
-** that would be appropriate.
-*/
-SQLITE_PRIVATE void sqlite3Error(sqlite3 *db, int err_code){
- assert( db!=0 );
- db->errCode = err_code;
- if( err_code || db->pErr ) sqlite3ErrorFinish(db, err_code);
-}
-
-/*
-** Load the sqlite3.iSysErrno field if that is an appropriate thing
-** to do based on the SQLite error code in rc.
-*/
-SQLITE_PRIVATE void sqlite3SystemError(sqlite3 *db, int rc){
- if( rc==SQLITE_IOERR_NOMEM ) return;
- rc &= 0xff;
- if( rc==SQLITE_CANTOPEN || rc==SQLITE_IOERR ){
- db->iSysErrno = sqlite3OsGetLastError(db->pVfs);
- }
-}
-
-/*
-** Set the most recent error code and error string for the sqlite
-** handle "db". The error code is set to "err_code".
-**
-** If it is not NULL, string zFormat specifies the format of the
-** error string in the style of the printf functions: The following
-** format characters are allowed:
-**
-** %s Insert a string
-** %z A string that should be freed after use
-** %d Insert an integer
-** %T Insert a token
-** %S Insert the first element of a SrcList
-**
-** zFormat and any string tokens that follow it are assumed to be
-** encoded in UTF-8.
-**
-** To clear the most recent error for sqlite handle "db", sqlite3Error
-** should be called with err_code set to SQLITE_OK and zFormat set
-** to NULL.
-*/
-SQLITE_PRIVATE void sqlite3ErrorWithMsg(sqlite3 *db, int err_code, const char *zFormat, ...){
- assert( db!=0 );
- db->errCode = err_code;
- sqlite3SystemError(db, err_code);
- if( zFormat==0 ){
- sqlite3Error(db, err_code);
- }else if( db->pErr || (db->pErr = sqlite3ValueNew(db))!=0 ){
- char *z;
- va_list ap;
- va_start(ap, zFormat);
- z = sqlite3VMPrintf(db, zFormat, ap);
- va_end(ap);
- sqlite3ValueSetStr(db->pErr, -1, z, SQLITE_UTF8, SQLITE_DYNAMIC);
- }
-}
-
-/*
-** Add an error message to pParse->zErrMsg and increment pParse->nErr.
-** The following formatting characters are allowed:
-**
-** %s Insert a string
-** %z A string that should be freed after use
-** %d Insert an integer
-** %T Insert a token
-** %S Insert the first element of a SrcList
-**
-** This function should be used to report any error that occurs while
-** compiling an SQL statement (i.e. within sqlite3_prepare()). The
-** last thing the sqlite3_prepare() function does is copy the error
-** stored by this function into the database handle using sqlite3Error().
-** Functions sqlite3Error() or sqlite3ErrorWithMsg() should be used
-** during statement execution (sqlite3_step() etc.).
-*/
-SQLITE_PRIVATE void sqlite3ErrorMsg(Parse *pParse, const char *zFormat, ...){
- char *zMsg;
- va_list ap;
- sqlite3 *db = pParse->db;
- va_start(ap, zFormat);
- zMsg = sqlite3VMPrintf(db, zFormat, ap);
- va_end(ap);
- if( db->suppressErr ){
- sqlite3DbFree(db, zMsg);
- }else{
- pParse->nErr++;
- sqlite3DbFree(db, pParse->zErrMsg);
- pParse->zErrMsg = zMsg;
- pParse->rc = SQLITE_ERROR;
- }
-}
-
-/*
-** Convert an SQL-style quoted string into a normal string by removing
-** the quote characters. The conversion is done in-place. If the
-** input does not begin with a quote character, then this routine
-** is a no-op.
-**
-** The input string must be zero-terminated. A new zero-terminator
-** is added to the dequoted string.
-**
-** The return value is -1 if no dequoting occurs or the length of the
-** dequoted string, exclusive of the zero terminator, if dequoting does
-** occur.
-**
-** 2002-Feb-14: This routine is extended to remove MS-Access style
-** brackets from around identifiers. For example: "[a-b-c]" becomes
-** "a-b-c".
-*/
-SQLITE_PRIVATE void sqlite3Dequote(char *z){
- char quote;
- int i, j;
- if( z==0 ) return;
- quote = z[0];
- if( !sqlite3Isquote(quote) ) return;
- if( quote=='[' ) quote = ']';
- for(i=1, j=0;; i++){
- assert( z[i] );
- if( z[i]==quote ){
- if( z[i+1]==quote ){
- z[j++] = quote;
- i++;
- }else{
- break;
- }
- }else{
- z[j++] = z[i];
- }
- }
- z[j] = 0;
-}
-
-/*
-** Generate a Token object from a string
-*/
-SQLITE_PRIVATE void sqlite3TokenInit(Token *p, char *z){
- p->z = z;
- p->n = sqlite3Strlen30(z);
-}
-
-/* Convenient short-hand */
-#define UpperToLower sqlite3UpperToLower
-
-/*
-** Some systems have stricmp(). Others have strcasecmp(). Because
-** there is no consistency, we will define our own.
-**
-** IMPLEMENTATION-OF: R-30243-02494 The sqlite3_stricmp() and
-** sqlite3_strnicmp() APIs allow applications and extensions to compare
-** the contents of two buffers containing UTF-8 strings in a
-** case-independent fashion, using the same definition of "case
-** independence" that SQLite uses internally when comparing identifiers.
-*/
-SQLITE_API int SQLITE_STDCALL sqlite3_stricmp(const char *zLeft, const char *zRight){
- if( zLeft==0 ){
- return zRight ? -1 : 0;
- }else if( zRight==0 ){
- return 1;
- }
- return sqlite3StrICmp(zLeft, zRight);
-}
-SQLITE_PRIVATE int sqlite3StrICmp(const char *zLeft, const char *zRight){
- unsigned char *a, *b;
- int c;
- a = (unsigned char *)zLeft;
- b = (unsigned char *)zRight;
- for(;;){
- c = (int)UpperToLower[*a] - (int)UpperToLower[*b];
- if( c || *a==0 ) break;
- a++;
- b++;
- }
- return c;
-}
-SQLITE_API int SQLITE_STDCALL sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){
- register unsigned char *a, *b;
- if( zLeft==0 ){
- return zRight ? -1 : 0;
- }else if( zRight==0 ){
- return 1;
- }
- a = (unsigned char *)zLeft;
- b = (unsigned char *)zRight;
- while( N-- > 0 && *a!=0 && UpperToLower[*a]==UpperToLower[*b]){ a++; b++; }
- return N<0 ? 0 : UpperToLower[*a] - UpperToLower[*b];
-}
-
-/*
-** The string z[] is an text representation of a real number.
-** Convert this string to a double and write it into *pResult.
-**
-** The string z[] is length bytes in length (bytes, not characters) and
-** uses the encoding enc. The string is not necessarily zero-terminated.
-**
-** Return TRUE if the result is a valid real number (or integer) and FALSE
-** if the string is empty or contains extraneous text. Valid numbers
-** are in one of these formats:
-**
-** [+-]digits[E[+-]digits]
-** [+-]digits.[digits][E[+-]digits]
-** [+-].digits[E[+-]digits]
-**
-** Leading and trailing whitespace is ignored for the purpose of determining
-** validity.
-**
-** If some prefix of the input string is a valid number, this routine
-** returns FALSE but it still converts the prefix and writes the result
-** into *pResult.
-*/
-SQLITE_PRIVATE int sqlite3AtoF(const char *z, double *pResult, int length, u8 enc){
-#ifndef SQLITE_OMIT_FLOATING_POINT
- int incr;
- const char *zEnd = z + length;
- /* sign * significand * (10 ^ (esign * exponent)) */
- int sign = 1; /* sign of significand */
- i64 s = 0; /* significand */
- int d = 0; /* adjust exponent for shifting decimal point */
- int esign = 1; /* sign of exponent */
- int e = 0; /* exponent */
- int eValid = 1; /* True exponent is either not used or is well-formed */
- double result;
- int nDigits = 0;
- int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */
-
- assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE );
- *pResult = 0.0; /* Default return value, in case of an error */
-
- if( enc==SQLITE_UTF8 ){
- incr = 1;
- }else{
- int i;
- incr = 2;
- assert( SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 );
- for(i=3-enc; i=zEnd ) return 0;
-
- /* get sign of significand */
- if( *z=='-' ){
- sign = -1;
- z+=incr;
- }else if( *z=='+' ){
- z+=incr;
- }
-
- /* copy max significant digits to significand */
- while( z=zEnd ) goto do_atof_calc;
-
- /* if decimal point is present */
- if( *z=='.' ){
- z+=incr;
- /* copy digits from after decimal to significand
- ** (decrease exponent by d to shift decimal right) */
- while( z=zEnd ) goto do_atof_calc;
-
- /* if exponent is present */
- if( *z=='e' || *z=='E' ){
- z+=incr;
- eValid = 0;
-
- /* This branch is needed to avoid a (harmless) buffer overread. The
- ** special comment alerts the mutation tester that the correct answer
- ** is obtained even if the branch is omitted */
- if( z>=zEnd ) goto do_atof_calc; /*PREVENTS-HARMLESS-OVERREAD*/
-
- /* get sign of exponent */
- if( *z=='-' ){
- esign = -1;
- z+=incr;
- }else if( *z=='+' ){
- z+=incr;
- }
- /* copy digits to exponent */
- while( z0 ){ /*OPTIMIZATION-IF-TRUE*/
- if( esign>0 ){
- if( s>=(LARGEST_INT64/10) ) break; /*OPTIMIZATION-IF-FALSE*/
- s *= 10;
- }else{
- if( s%10!=0 ) break; /*OPTIMIZATION-IF-FALSE*/
- s /= 10;
- }
- e--;
- }
-
- /* adjust the sign of significand */
- s = sign<0 ? -s : s;
-
- if( e==0 ){ /*OPTIMIZATION-IF-TRUE*/
- result = (double)s;
- }else{
- LONGDOUBLE_TYPE scale = 1.0;
- /* attempt to handle extremely small/large numbers better */
- if( e>307 ){ /*OPTIMIZATION-IF-TRUE*/
- if( e<342 ){ /*OPTIMIZATION-IF-TRUE*/
- while( e%308 ) { scale *= 1.0e+1; e -= 1; }
- if( esign<0 ){
- result = s / scale;
- result /= 1.0e+308;
- }else{
- result = s * scale;
- result *= 1.0e+308;
- }
- }else{ assert( e>=342 );
- if( esign<0 ){
- result = 0.0*s;
- }else{
- result = 1e308*1e308*s; /* Infinity */
- }
- }
- }else{
- /* 1.0e+22 is the largest power of 10 than can be
- ** represented exactly. */
- while( e%22 ) { scale *= 1.0e+1; e -= 1; }
- while( e>0 ) { scale *= 1.0e+22; e -= 22; }
- if( esign<0 ){
- result = s / scale;
- }else{
- result = s * scale;
- }
- }
- }
- }
-
- /* store the result */
- *pResult = result;
-
- /* return true if number and no extra non-whitespace chracters after */
- return z==zEnd && nDigits>0 && eValid && nonNum==0;
-#else
- return !sqlite3Atoi64(z, pResult, length, enc);
-#endif /* SQLITE_OMIT_FLOATING_POINT */
-}
-
-/*
-** Compare the 19-character string zNum against the text representation
-** value 2^63: 9223372036854775808. Return negative, zero, or positive
-** if zNum is less than, equal to, or greater than the string.
-** Note that zNum must contain exactly 19 characters.
-**
-** Unlike memcmp() this routine is guaranteed to return the difference
-** in the values of the last digit if the only difference is in the
-** last digit. So, for example,
-**
-** compare2pow63("9223372036854775800", 1)
-**
-** will return -8.
-*/
-static int compare2pow63(const char *zNum, int incr){
- int c = 0;
- int i;
- /* 012345678901234567 */
- const char *pow63 = "922337203685477580";
- for(i=0; c==0 && i<18; i++){
- c = (zNum[i*incr]-pow63[i])*10;
- }
- if( c==0 ){
- c = zNum[18*incr] - '8';
- testcase( c==(-1) );
- testcase( c==0 );
- testcase( c==(+1) );
- }
- return c;
-}
-
-/*
-** Convert zNum to a 64-bit signed integer. zNum must be decimal. This
-** routine does *not* accept hexadecimal notation.
-**
-** If the zNum value is representable as a 64-bit twos-complement
-** integer, then write that value into *pNum and return 0.
-**
-** If zNum is exactly 9223372036854775808, return 2. This special
-** case is broken out because while 9223372036854775808 cannot be a
-** signed 64-bit integer, its negative -9223372036854775808 can be.
-**
-** If zNum is too big for a 64-bit integer and is not
-** 9223372036854775808 or if zNum contains any non-numeric text,
-** then return 1.
-**
-** length is the number of bytes in the string (bytes, not characters).
-** The string is not necessarily zero-terminated. The encoding is
-** given by enc.
-*/
-SQLITE_PRIVATE int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc){
- int incr;
- u64 u = 0;
- int neg = 0; /* assume positive */
- int i;
- int c = 0;
- int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */
- const char *zStart;
- const char *zEnd = zNum + length;
- assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE );
- if( enc==SQLITE_UTF8 ){
- incr = 1;
- }else{
- incr = 2;
- assert( SQLITE_UTF16LE==2 && SQLITE_UTF16BE==3 );
- for(i=3-enc; i='0' && c<='9'; i+=incr){
- u = u*10 + c - '0';
- }
- if( u>LARGEST_INT64 ){
- *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64;
- }else if( neg ){
- *pNum = -(i64)u;
- }else{
- *pNum = (i64)u;
- }
- testcase( i==18 );
- testcase( i==19 );
- testcase( i==20 );
- if( &zNum[i]19*incr /* Too many digits */
- || nonNum /* UTF16 with high-order bytes non-zero */
- ){
- /* zNum is empty or contains non-numeric text or is longer
- ** than 19 digits (thus guaranteeing that it is too large) */
- return 1;
- }else if( i<19*incr ){
- /* Less than 19 digits, so we know that it fits in 64 bits */
- assert( u<=LARGEST_INT64 );
- return 0;
- }else{
- /* zNum is a 19-digit numbers. Compare it against 9223372036854775808. */
- c = compare2pow63(zNum, incr);
- if( c<0 ){
- /* zNum is less than 9223372036854775808 so it fits */
- assert( u<=LARGEST_INT64 );
- return 0;
- }else if( c>0 ){
- /* zNum is greater than 9223372036854775808 so it overflows */
- return 1;
- }else{
- /* zNum is exactly 9223372036854775808. Fits if negative. The
- ** special case 2 overflow if positive */
- assert( u-1==LARGEST_INT64 );
- return neg ? 0 : 2;
- }
- }
-}
-
-/*
-** Transform a UTF-8 integer literal, in either decimal or hexadecimal,
-** into a 64-bit signed integer. This routine accepts hexadecimal literals,
-** whereas sqlite3Atoi64() does not.
-**
-** Returns:
-**
-** 0 Successful transformation. Fits in a 64-bit signed integer.
-** 1 Integer too large for a 64-bit signed integer or is malformed
-** 2 Special case of 9223372036854775808
-*/
-SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){
-#ifndef SQLITE_OMIT_HEX_INTEGER
- if( z[0]=='0'
- && (z[1]=='x' || z[1]=='X')
- ){
- u64 u = 0;
- int i, k;
- for(i=2; z[i]=='0'; i++){}
- for(k=i; sqlite3Isxdigit(z[k]); k++){
- u = u*16 + sqlite3HexToInt(z[k]);
- }
- memcpy(pOut, &u, 8);
- return (z[k]==0 && k-i<=16) ? 0 : 1;
- }else
-#endif /* SQLITE_OMIT_HEX_INTEGER */
- {
- return sqlite3Atoi64(z, pOut, sqlite3Strlen30(z), SQLITE_UTF8);
- }
-}
-
-/*
-** If zNum represents an integer that will fit in 32-bits, then set
-** *pValue to that integer and return true. Otherwise return false.
-**
-** This routine accepts both decimal and hexadecimal notation for integers.
-**
-** Any non-numeric characters that following zNum are ignored.
-** This is different from sqlite3Atoi64() which requires the
-** input number to be zero-terminated.
-*/
-SQLITE_PRIVATE int sqlite3GetInt32(const char *zNum, int *pValue){
- sqlite_int64 v = 0;
- int i, c;
- int neg = 0;
- if( zNum[0]=='-' ){
- neg = 1;
- zNum++;
- }else if( zNum[0]=='+' ){
- zNum++;
- }
-#ifndef SQLITE_OMIT_HEX_INTEGER
- else if( zNum[0]=='0'
- && (zNum[1]=='x' || zNum[1]=='X')
- && sqlite3Isxdigit(zNum[2])
- ){
- u32 u = 0;
- zNum += 2;
- while( zNum[0]=='0' ) zNum++;
- for(i=0; sqlite3Isxdigit(zNum[i]) && i<8; i++){
- u = u*16 + sqlite3HexToInt(zNum[i]);
- }
- if( (u&0x80000000)==0 && sqlite3Isxdigit(zNum[i])==0 ){
- memcpy(pValue, &u, 4);
- return 1;
- }else{
- return 0;
- }
- }
-#endif
- while( zNum[0]=='0' ) zNum++;
- for(i=0; i<11 && (c = zNum[i] - '0')>=0 && c<=9; i++){
- v = v*10 + c;
- }
-
- /* The longest decimal representation of a 32 bit integer is 10 digits:
- **
- ** 1234567890
- ** 2^31 -> 2147483648
- */
- testcase( i==10 );
- if( i>10 ){
- return 0;
- }
- testcase( v-neg==2147483647 );
- if( v-neg>2147483647 ){
- return 0;
- }
- if( neg ){
- v = -v;
- }
- *pValue = (int)v;
- return 1;
-}
-
-/*
-** Return a 32-bit integer value extracted from a string. If the
-** string is not an integer, just return 0.
-*/
-SQLITE_PRIVATE int sqlite3Atoi(const char *z){
- int x = 0;
- if( z ) sqlite3GetInt32(z, &x);
- return x;
-}
-
-/*
-** The variable-length integer encoding is as follows:
-**
-** KEY:
-** A = 0xxxxxxx 7 bits of data and one flag bit
-** B = 1xxxxxxx 7 bits of data and one flag bit
-** C = xxxxxxxx 8 bits of data
-**
-** 7 bits - A
-** 14 bits - BA
-** 21 bits - BBA
-** 28 bits - BBBA
-** 35 bits - BBBBA
-** 42 bits - BBBBBA
-** 49 bits - BBBBBBA
-** 56 bits - BBBBBBBA
-** 64 bits - BBBBBBBBC
-*/
-
-/*
-** Write a 64-bit variable-length integer to memory starting at p[0].
-** The length of data write will be between 1 and 9 bytes. The number
-** of bytes written is returned.
-**
-** A variable-length integer consists of the lower 7 bits of each byte
-** for all bytes that have the 8th bit set and one byte with the 8th
-** bit clear. Except, if we get to the 9th byte, it stores the full
-** 8 bits and is the last byte.
-*/
-static int SQLITE_NOINLINE putVarint64(unsigned char *p, u64 v){
- int i, j, n;
- u8 buf[10];
- if( v & (((u64)0xff000000)<<32) ){
- p[8] = (u8)v;
- v >>= 8;
- for(i=7; i>=0; i--){
- p[i] = (u8)((v & 0x7f) | 0x80);
- v >>= 7;
- }
- return 9;
- }
- n = 0;
- do{
- buf[n++] = (u8)((v & 0x7f) | 0x80);
- v >>= 7;
- }while( v!=0 );
- buf[0] &= 0x7f;
- assert( n<=9 );
- for(i=0, j=n-1; j>=0; j--, i++){
- p[i] = buf[j];
- }
- return n;
-}
-SQLITE_PRIVATE int sqlite3PutVarint(unsigned char *p, u64 v){
- if( v<=0x7f ){
- p[0] = v&0x7f;
- return 1;
- }
- if( v<=0x3fff ){
- p[0] = ((v>>7)&0x7f)|0x80;
- p[1] = v&0x7f;
- return 2;
- }
- return putVarint64(p,v);
-}
-
-/*
-** Bitmasks used by sqlite3GetVarint(). These precomputed constants
-** are defined here rather than simply putting the constant expressions
-** inline in order to work around bugs in the RVT compiler.
-**
-** SLOT_2_0 A mask for (0x7f<<14) | 0x7f
-**
-** SLOT_4_2_0 A mask for (0x7f<<28) | SLOT_2_0
-*/
-#define SLOT_2_0 0x001fc07f
-#define SLOT_4_2_0 0xf01fc07f
-
-
-/*
-** Read a 64-bit variable-length integer from memory starting at p[0].
-** Return the number of bytes read. The value is stored in *v.
-*/
-SQLITE_PRIVATE u8 sqlite3GetVarint(const unsigned char *p, u64 *v){
- u32 a,b,s;
-
- a = *p;
- /* a: p0 (unmasked) */
- if (!(a&0x80))
- {
- *v = a;
- return 1;
- }
-
- p++;
- b = *p;
- /* b: p1 (unmasked) */
- if (!(b&0x80))
- {
- a &= 0x7f;
- a = a<<7;
- a |= b;
- *v = a;
- return 2;
- }
-
- /* Verify that constants are precomputed correctly */
- assert( SLOT_2_0 == ((0x7f<<14) | (0x7f)) );
- assert( SLOT_4_2_0 == ((0xfU<<28) | (0x7f<<14) | (0x7f)) );
-
- p++;
- a = a<<14;
- a |= *p;
- /* a: p0<<14 | p2 (unmasked) */
- if (!(a&0x80))
- {
- a &= SLOT_2_0;
- b &= 0x7f;
- b = b<<7;
- a |= b;
- *v = a;
- return 3;
- }
-
- /* CSE1 from below */
- a &= SLOT_2_0;
- p++;
- b = b<<14;
- b |= *p;
- /* b: p1<<14 | p3 (unmasked) */
- if (!(b&0x80))
- {
- b &= SLOT_2_0;
- /* moved CSE1 up */
- /* a &= (0x7f<<14)|(0x7f); */
- a = a<<7;
- a |= b;
- *v = a;
- return 4;
- }
-
- /* a: p0<<14 | p2 (masked) */
- /* b: p1<<14 | p3 (unmasked) */
- /* 1:save off p0<<21 | p1<<14 | p2<<7 | p3 (masked) */
- /* moved CSE1 up */
- /* a &= (0x7f<<14)|(0x7f); */
- b &= SLOT_2_0;
- s = a;
- /* s: p0<<14 | p2 (masked) */
-
- p++;
- a = a<<14;
- a |= *p;
- /* a: p0<<28 | p2<<14 | p4 (unmasked) */
- if (!(a&0x80))
- {
- /* we can skip these cause they were (effectively) done above
- ** while calculating s */
- /* a &= (0x7f<<28)|(0x7f<<14)|(0x7f); */
- /* b &= (0x7f<<14)|(0x7f); */
- b = b<<7;
- a |= b;
- s = s>>18;
- *v = ((u64)s)<<32 | a;
- return 5;
- }
-
- /* 2:save off p0<<21 | p1<<14 | p2<<7 | p3 (masked) */
- s = s<<7;
- s |= b;
- /* s: p0<<21 | p1<<14 | p2<<7 | p3 (masked) */
-
- p++;
- b = b<<14;
- b |= *p;
- /* b: p1<<28 | p3<<14 | p5 (unmasked) */
- if (!(b&0x80))
- {
- /* we can skip this cause it was (effectively) done above in calc'ing s */
- /* b &= (0x7f<<28)|(0x7f<<14)|(0x7f); */
- a &= SLOT_2_0;
- a = a<<7;
- a |= b;
- s = s>>18;
- *v = ((u64)s)<<32 | a;
- return 6;
- }
-
- p++;
- a = a<<14;
- a |= *p;
- /* a: p2<<28 | p4<<14 | p6 (unmasked) */
- if (!(a&0x80))
- {
- a &= SLOT_4_2_0;
- b &= SLOT_2_0;
- b = b<<7;
- a |= b;
- s = s>>11;
- *v = ((u64)s)<<32 | a;
- return 7;
- }
-
- /* CSE2 from below */
- a &= SLOT_2_0;
- p++;
- b = b<<14;
- b |= *p;
- /* b: p3<<28 | p5<<14 | p7 (unmasked) */
- if (!(b&0x80))
- {
- b &= SLOT_4_2_0;
- /* moved CSE2 up */
- /* a &= (0x7f<<14)|(0x7f); */
- a = a<<7;
- a |= b;
- s = s>>4;
- *v = ((u64)s)<<32 | a;
- return 8;
- }
-
- p++;
- a = a<<15;
- a |= *p;
- /* a: p4<<29 | p6<<15 | p8 (unmasked) */
-
- /* moved CSE2 up */
- /* a &= (0x7f<<29)|(0x7f<<15)|(0xff); */
- b &= SLOT_2_0;
- b = b<<8;
- a |= b;
-
- s = s<<4;
- b = p[-4];
- b &= 0x7f;
- b = b>>3;
- s |= b;
-
- *v = ((u64)s)<<32 | a;
-
- return 9;
-}
-
-/*
-** Read a 32-bit variable-length integer from memory starting at p[0].
-** Return the number of bytes read. The value is stored in *v.
-**
-** If the varint stored in p[0] is larger than can fit in a 32-bit unsigned
-** integer, then set *v to 0xffffffff.
-**
-** A MACRO version, getVarint32, is provided which inlines the
-** single-byte case. All code should use the MACRO version as
-** this function assumes the single-byte case has already been handled.
-*/
-SQLITE_PRIVATE u8 sqlite3GetVarint32(const unsigned char *p, u32 *v){
- u32 a,b;
-
- /* The 1-byte case. Overwhelmingly the most common. Handled inline
- ** by the getVarin32() macro */
- a = *p;
- /* a: p0 (unmasked) */
-#ifndef getVarint32
- if (!(a&0x80))
- {
- /* Values between 0 and 127 */
- *v = a;
- return 1;
- }
-#endif
-
- /* The 2-byte case */
- p++;
- b = *p;
- /* b: p1 (unmasked) */
- if (!(b&0x80))
- {
- /* Values between 128 and 16383 */
- a &= 0x7f;
- a = a<<7;
- *v = a | b;
- return 2;
- }
-
- /* The 3-byte case */
- p++;
- a = a<<14;
- a |= *p;
- /* a: p0<<14 | p2 (unmasked) */
- if (!(a&0x80))
- {
- /* Values between 16384 and 2097151 */
- a &= (0x7f<<14)|(0x7f);
- b &= 0x7f;
- b = b<<7;
- *v = a | b;
- return 3;
- }
-
- /* A 32-bit varint is used to store size information in btrees.
- ** Objects are rarely larger than 2MiB limit of a 3-byte varint.
- ** A 3-byte varint is sufficient, for example, to record the size
- ** of a 1048569-byte BLOB or string.
- **
- ** We only unroll the first 1-, 2-, and 3- byte cases. The very
- ** rare larger cases can be handled by the slower 64-bit varint
- ** routine.
- */
-#if 1
- {
- u64 v64;
- u8 n;
-
- p -= 2;
- n = sqlite3GetVarint(p, &v64);
- assert( n>3 && n<=9 );
- if( (v64 & SQLITE_MAX_U32)!=v64 ){
- *v = 0xffffffff;
- }else{
- *v = (u32)v64;
- }
- return n;
- }
-
-#else
- /* For following code (kept for historical record only) shows an
- ** unrolling for the 3- and 4-byte varint cases. This code is
- ** slightly faster, but it is also larger and much harder to test.
- */
- p++;
- b = b<<14;
- b |= *p;
- /* b: p1<<14 | p3 (unmasked) */
- if (!(b&0x80))
- {
- /* Values between 2097152 and 268435455 */
- b &= (0x7f<<14)|(0x7f);
- a &= (0x7f<<14)|(0x7f);
- a = a<<7;
- *v = a | b;
- return 4;
- }
-
- p++;
- a = a<<14;
- a |= *p;
- /* a: p0<<28 | p2<<14 | p4 (unmasked) */
- if (!(a&0x80))
- {
- /* Values between 268435456 and 34359738367 */
- a &= SLOT_4_2_0;
- b &= SLOT_4_2_0;
- b = b<<7;
- *v = a | b;
- return 5;
- }
-
- /* We can only reach this point when reading a corrupt database
- ** file. In that case we are not in any hurry. Use the (relatively
- ** slow) general-purpose sqlite3GetVarint() routine to extract the
- ** value. */
- {
- u64 v64;
- u8 n;
-
- p -= 4;
- n = sqlite3GetVarint(p, &v64);
- assert( n>5 && n<=9 );
- *v = (u32)v64;
- return n;
- }
-#endif
-}
-
-/*
-** Return the number of bytes that will be needed to store the given
-** 64-bit integer.
-*/
-SQLITE_PRIVATE int sqlite3VarintLen(u64 v){
- int i;
- for(i=1; (v >>= 7)!=0; i++){ assert( i<10 ); }
- return i;
-}
-
-
-/*
-** Read or write a four-byte big-endian integer value.
-*/
-SQLITE_PRIVATE u32 sqlite3Get4byte(const u8 *p){
-#if SQLITE_BYTEORDER==4321
- u32 x;
- memcpy(&x,p,4);
- return x;
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(__GNUC__) && GCC_VERSION>=4003000
- u32 x;
- memcpy(&x,p,4);
- return __builtin_bswap32(x);
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(_MSC_VER) && _MSC_VER>=1300
- u32 x;
- memcpy(&x,p,4);
- return _byteswap_ulong(x);
-#else
- testcase( p[0]&0x80 );
- return ((unsigned)p[0]<<24) | (p[1]<<16) | (p[2]<<8) | p[3];
-#endif
-}
-SQLITE_PRIVATE void sqlite3Put4byte(unsigned char *p, u32 v){
-#if SQLITE_BYTEORDER==4321
- memcpy(p,&v,4);
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(__GNUC__) && GCC_VERSION>=4003000
- u32 x = __builtin_bswap32(v);
- memcpy(p,&x,4);
-#elif SQLITE_BYTEORDER==1234 && !defined(SQLITE_DISABLE_INTRINSIC) \
- && defined(_MSC_VER) && _MSC_VER>=1300
- u32 x = _byteswap_ulong(v);
- memcpy(p,&x,4);
-#else
- p[0] = (u8)(v>>24);
- p[1] = (u8)(v>>16);
- p[2] = (u8)(v>>8);
- p[3] = (u8)v;
-#endif
-}
-
-
-
-/*
-** Translate a single byte of Hex into an integer.
-** This routine only works if h really is a valid hexadecimal
-** character: 0..9a..fA..F
-*/
-SQLITE_PRIVATE u8 sqlite3HexToInt(int h){
- assert( (h>='0' && h<='9') || (h>='a' && h<='f') || (h>='A' && h<='F') );
-#ifdef SQLITE_ASCII
- h += 9*(1&(h>>6));
-#endif
-#ifdef SQLITE_EBCDIC
- h += 9*(1&~(h>>4));
-#endif
- return (u8)(h & 0xf);
-}
-
-#if !defined(SQLITE_OMIT_BLOB_LITERAL) || defined(SQLITE_HAS_CODEC)
-/*
-** Convert a BLOB literal of the form "x'hhhhhh'" into its binary
-** value. Return a pointer to its binary value. Space to hold the
-** binary value has been obtained from malloc and must be freed by
-** the calling routine.
-*/
-SQLITE_PRIVATE void *sqlite3HexToBlob(sqlite3 *db, const char *z, int n){
- char *zBlob;
- int i;
-
- zBlob = (char *)sqlite3DbMallocRawNN(db, n/2 + 1);
- n--;
- if( zBlob ){
- for(i=0; imagic;
- if( magic!=SQLITE_MAGIC_OPEN ){
- if( sqlite3SafetyCheckSickOrOk(db) ){
- testcase( sqlite3GlobalConfig.xLog!=0 );
- logBadConnection("unopened");
- }
- return 0;
- }else{
- return 1;
- }
-}
-SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3 *db){
- u32 magic;
- magic = db->magic;
- if( magic!=SQLITE_MAGIC_SICK &&
- magic!=SQLITE_MAGIC_OPEN &&
- magic!=SQLITE_MAGIC_BUSY ){
- testcase( sqlite3GlobalConfig.xLog!=0 );
- logBadConnection("invalid");
- return 0;
- }else{
- return 1;
- }
-}
-
-/*
-** Attempt to add, substract, or multiply the 64-bit signed value iB against
-** the other 64-bit signed integer at *pA and store the result in *pA.
-** Return 0 on success. Or if the operation would have resulted in an
-** overflow, leave *pA unchanged and return 1.
-*/
-SQLITE_PRIVATE int sqlite3AddInt64(i64 *pA, i64 iB){
- i64 iA = *pA;
- testcase( iA==0 ); testcase( iA==1 );
- testcase( iB==-1 ); testcase( iB==0 );
- if( iB>=0 ){
- testcase( iA>0 && LARGEST_INT64 - iA == iB );
- testcase( iA>0 && LARGEST_INT64 - iA == iB - 1 );
- if( iA>0 && LARGEST_INT64 - iA < iB ) return 1;
- }else{
- testcase( iA<0 && -(iA + LARGEST_INT64) == iB + 1 );
- testcase( iA<0 && -(iA + LARGEST_INT64) == iB + 2 );
- if( iA<0 && -(iA + LARGEST_INT64) > iB + 1 ) return 1;
- }
- *pA += iB;
- return 0;
-}
-SQLITE_PRIVATE int sqlite3SubInt64(i64 *pA, i64 iB){
- testcase( iB==SMALLEST_INT64+1 );
- if( iB==SMALLEST_INT64 ){
- testcase( (*pA)==(-1) ); testcase( (*pA)==0 );
- if( (*pA)>=0 ) return 1;
- *pA -= iB;
- return 0;
- }else{
- return sqlite3AddInt64(pA, -iB);
- }
-}
-#define TWOPOWER32 (((i64)1)<<32)
-#define TWOPOWER31 (((i64)1)<<31)
-SQLITE_PRIVATE int sqlite3MulInt64(i64 *pA, i64 iB){
- i64 iA = *pA;
- i64 iA1, iA0, iB1, iB0, r;
-
- iA1 = iA/TWOPOWER32;
- iA0 = iA % TWOPOWER32;
- iB1 = iB/TWOPOWER32;
- iB0 = iB % TWOPOWER32;
- if( iA1==0 ){
- if( iB1==0 ){
- *pA *= iB;
- return 0;
- }
- r = iA0*iB1;
- }else if( iB1==0 ){
- r = iA1*iB0;
- }else{
- /* If both iA1 and iB1 are non-zero, overflow will result */
- return 1;
- }
- testcase( r==(-TWOPOWER31)-1 );
- testcase( r==(-TWOPOWER31) );
- testcase( r==TWOPOWER31 );
- testcase( r==TWOPOWER31-1 );
- if( r<(-TWOPOWER31) || r>=TWOPOWER31 ) return 1;
- r *= TWOPOWER32;
- if( sqlite3AddInt64(&r, iA0*iB0) ) return 1;
- *pA = r;
- return 0;
-}
-
-/*
-** Compute the absolute value of a 32-bit signed integer, of possible. Or
-** if the integer has a value of -2147483648, return +2147483647
-*/
-SQLITE_PRIVATE int sqlite3AbsInt32(int x){
- if( x>=0 ) return x;
- if( x==(int)0x80000000 ) return 0x7fffffff;
- return -x;
-}
-
-#ifdef SQLITE_ENABLE_8_3_NAMES
-/*
-** If SQLITE_ENABLE_8_3_NAMES is set at compile-time and if the database
-** filename in zBaseFilename is a URI with the "8_3_names=1" parameter and
-** if filename in z[] has a suffix (a.k.a. "extension") that is longer than
-** three characters, then shorten the suffix on z[] to be the last three
-** characters of the original suffix.
-**
-** If SQLITE_ENABLE_8_3_NAMES is set to 2 at compile-time, then always
-** do the suffix shortening regardless of URI parameter.
-**
-** Examples:
-**
-** test.db-journal => test.nal
-** test.db-wal => test.wal
-** test.db-shm => test.shm
-** test.db-mj7f3319fa => test.9fa
-*/
-SQLITE_PRIVATE void sqlite3FileSuffix3(const char *zBaseFilename, char *z){
-#if SQLITE_ENABLE_8_3_NAMES<2
- if( sqlite3_uri_boolean(zBaseFilename, "8_3_names", 0) )
-#endif
- {
- int i, sz;
- sz = sqlite3Strlen30(z);
- for(i=sz-1; i>0 && z[i]!='/' && z[i]!='.'; i--){}
- if( z[i]=='.' && ALWAYS(sz>i+4) ) memmove(&z[i+1], &z[sz-3], 4);
- }
-}
-#endif
-
-/*
-** Find (an approximate) sum of two LogEst values. This computation is
-** not a simple "+" operator because LogEst is stored as a logarithmic
-** value.
-**
-*/
-SQLITE_PRIVATE LogEst sqlite3LogEstAdd(LogEst a, LogEst b){
- static const unsigned char x[] = {
- 10, 10, /* 0,1 */
- 9, 9, /* 2,3 */
- 8, 8, /* 4,5 */
- 7, 7, 7, /* 6,7,8 */
- 6, 6, 6, /* 9,10,11 */
- 5, 5, 5, /* 12-14 */
- 4, 4, 4, 4, /* 15-18 */
- 3, 3, 3, 3, 3, 3, /* 19-24 */
- 2, 2, 2, 2, 2, 2, 2, /* 25-31 */
- };
- if( a>=b ){
- if( a>b+49 ) return a;
- if( a>b+31 ) return a+1;
- return a+x[a-b];
- }else{
- if( b>a+49 ) return b;
- if( b>a+31 ) return b+1;
- return b+x[b-a];
- }
-}
-
-/*
-** Convert an integer into a LogEst. In other words, compute an
-** approximation for 10*log2(x).
-*/
-SQLITE_PRIVATE LogEst sqlite3LogEst(u64 x){
- static LogEst a[] = { 0, 2, 3, 5, 6, 7, 8, 9 };
- LogEst y = 40;
- if( x<8 ){
- if( x<2 ) return 0;
- while( x<8 ){ y -= 10; x <<= 1; }
- }else{
- while( x>255 ){ y += 40; x >>= 4; } /*OPTIMIZATION-IF-TRUE*/
- while( x>15 ){ y += 10; x >>= 1; }
- }
- return a[x&7] + y - 10;
-}
-
-#ifndef SQLITE_OMIT_VIRTUALTABLE
-/*
-** Convert a double into a LogEst
-** In other words, compute an approximation for 10*log2(x).
-*/
-SQLITE_PRIVATE LogEst sqlite3LogEstFromDouble(double x){
- u64 a;
- LogEst e;
- assert( sizeof(x)==8 && sizeof(a)==8 );
- if( x<=1 ) return 0;
- if( x<=2000000000 ) return sqlite3LogEst((u64)x);
- memcpy(&a, &x, 8);
- e = (a>>52) - 1022;
- return e*10;
-}
-#endif /* SQLITE_OMIT_VIRTUALTABLE */
-
-#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
- defined(SQLITE_ENABLE_STAT3_OR_STAT4) || \
- defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
-/*
-** Convert a LogEst into an integer.
-**
-** Note that this routine is only used when one or more of various
-** non-standard compile-time options is enabled.
-*/
-SQLITE_PRIVATE u64 sqlite3LogEstToInt(LogEst x){
- u64 n;
- n = x%10;
- x /= 10;
- if( n>=5 ) n -= 2;
- else if( n>=1 ) n -= 1;
-#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) || \
- defined(SQLITE_EXPLAIN_ESTIMATED_ROWS)
- if( x>60 ) return (u64)LARGEST_INT64;
-#else
- /* If only SQLITE_ENABLE_STAT3_OR_STAT4 is on, then the largest input
- ** possible to this routine is 310, resulting in a maximum x of 31 */
- assert( x<=60 );
-#endif
- return x>=3 ? (n+8)<<(x-3) : (n+8)>>(3-x);
-}
-#endif /* defined SCANSTAT or STAT4 or ESTIMATED_ROWS */
-
-/************** End of util.c ************************************************/
-/************** Begin file hash.c ********************************************/
-/*
-** 2001 September 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-*************************************************************************
-** This is the implementation of generic hash-tables
-** used in SQLite.
-*/
-/* #include "sqliteInt.h" */
-/* #include */
-
-/* Turn bulk memory into a hash table object by initializing the
-** fields of the Hash structure.
-**
-** "pNew" is a pointer to the hash table that is to be initialized.
-*/
-SQLITE_PRIVATE void sqlite3HashInit(Hash *pNew){
- assert( pNew!=0 );
- pNew->first = 0;
- pNew->count = 0;
- pNew->htsize = 0;
- pNew->ht = 0;
-}
-
-/* Remove all entries from a hash table. Reclaim all memory.
-** Call this routine to delete a hash table or to reset a hash table
-** to the empty state.
-*/
-SQLITE_PRIVATE void sqlite3HashClear(Hash *pH){
- HashElem *elem; /* For looping over all elements of the table */
-
- assert( pH!=0 );
- elem = pH->first;
- pH->first = 0;
- sqlite3_free(pH->ht);
- pH->ht = 0;
- pH->htsize = 0;
- while( elem ){
- HashElem *next_elem = elem->next;
- sqlite3_free(elem);
- elem = next_elem;
- }
- pH->count = 0;
-}
-
-/*
-** The hashing function.
-*/
-static unsigned int strHash(const char *z){
- unsigned int h = 0;
- unsigned char c;
- while( (c = (unsigned char)*z++)!=0 ){ /*OPTIMIZATION-IF-TRUE*/
- h = (h<<3) ^ h ^ sqlite3UpperToLower[c];
- }
- return h;
-}
-
-
-/* Link pNew element into the hash table pH. If pEntry!=0 then also
-** insert pNew into the pEntry hash bucket.
-*/
-static void insertElement(
- Hash *pH, /* The complete hash table */
- struct _ht *pEntry, /* The entry into which pNew is inserted */
- HashElem *pNew /* The element to be inserted */
-){
- HashElem *pHead; /* First element already in pEntry */
- if( pEntry ){
- pHead = pEntry->count ? pEntry->chain : 0;
- pEntry->count++;
- pEntry->chain = pNew;
- }else{
- pHead = 0;
- }
- if( pHead ){
- pNew->next = pHead;
- pNew->prev = pHead->prev;
- if( pHead->prev ){ pHead->prev->next = pNew; }
- else { pH->first = pNew; }
- pHead->prev = pNew;
- }else{
- pNew->next = pH->first;
- if( pH->first ){ pH->first->prev = pNew; }
- pNew->prev = 0;
- pH->first = pNew;
- }
-}
-
-
-/* Resize the hash table so that it cantains "new_size" buckets.
-**
-** The hash table might fail to resize if sqlite3_malloc() fails or
-** if the new size is the same as the prior size.
-** Return TRUE if the resize occurs and false if not.
-*/
-static int rehash(Hash *pH, unsigned int new_size){
- struct _ht *new_ht; /* The new hash table */
- HashElem *elem, *next_elem; /* For looping over existing elements */
-
-#if SQLITE_MALLOC_SOFT_LIMIT>0
- if( new_size*sizeof(struct _ht)>SQLITE_MALLOC_SOFT_LIMIT ){
- new_size = SQLITE_MALLOC_SOFT_LIMIT/sizeof(struct _ht);
- }
- if( new_size==pH->htsize ) return 0;
-#endif
-
- /* The inability to allocates space for a larger hash table is
- ** a performance hit but it is not a fatal error. So mark the
- ** allocation as a benign. Use sqlite3Malloc()/memset(0) instead of
- ** sqlite3MallocZero() to make the allocation, as sqlite3MallocZero()
- ** only zeroes the requested number of bytes whereas this module will
- ** use the actual amount of space allocated for the hash table (which
- ** may be larger than the requested amount).
- */
- sqlite3BeginBenignMalloc();
- new_ht = (struct _ht *)sqlite3Malloc( new_size*sizeof(struct _ht) );
- sqlite3EndBenignMalloc();
-
- if( new_ht==0 ) return 0;
- sqlite3_free(pH->ht);
- pH->ht = new_ht;
- pH->htsize = new_size = sqlite3MallocSize(new_ht)/sizeof(struct _ht);
- memset(new_ht, 0, new_size*sizeof(struct _ht));
- for(elem=pH->first, pH->first=0; elem; elem = next_elem){
- unsigned int h = strHash(elem->pKey) % new_size;
- next_elem = elem->next;
- insertElement(pH, &new_ht[h], elem);
- }
- return 1;
-}
-
-/* This function (for internal use only) locates an element in an
-** hash table that matches the given key. The hash for this key is
-** also computed and returned in the *pH parameter.
-*/
-static HashElem *findElementWithHash(
- const Hash *pH, /* The pH to be searched */
- const char *pKey, /* The key we are searching for */
- unsigned int *pHash /* Write the hash value here */
-){
- HashElem *elem; /* Used to loop thru the element list */
- int count; /* Number of elements left to test */
- unsigned int h; /* The computed hash */
-
- if( pH->ht ){ /*OPTIMIZATION-IF-TRUE*/
- struct _ht *pEntry;
- h = strHash(pKey) % pH->htsize;
- pEntry = &pH->ht[h];
- elem = pEntry->chain;
- count = pEntry->count;
- }else{
- h = 0;
- elem = pH->first;
- count = pH->count;
- }
- *pHash = h;
- while( count-- ){
- assert( elem!=0 );
- if( sqlite3StrICmp(elem->pKey,pKey)==0 ){
- return elem;
- }
- elem = elem->next;
- }
- return 0;
-}
-
-/* Remove a single entry from the hash table given a pointer to that
-** element and a hash on the element's key.
-*/
-static void removeElementGivenHash(
- Hash *pH, /* The pH containing "elem" */
- HashElem* elem, /* The element to be removed from the pH */
- unsigned int h /* Hash value for the element */
-){
- struct _ht *pEntry;
- if( elem->prev ){
- elem->prev->next = elem->next;
- }else{
- pH->first = elem->next;
- }
- if( elem->next ){
- elem->next->prev = elem->prev;
- }
- if( pH->ht ){
- pEntry = &pH->ht[h];
- if( pEntry->chain==elem ){
- pEntry->chain = elem->next;
- }
- pEntry->count--;
- assert( pEntry->count>=0 );
- }
- sqlite3_free( elem );
- pH->count--;
- if( pH->count==0 ){
- assert( pH->first==0 );
- assert( pH->count==0 );
- sqlite3HashClear(pH);
- }
-}
-
-/* Attempt to locate an element of the hash table pH with a key
-** that matches pKey. Return the data for this element if it is
-** found, or NULL if there is no match.
-*/
-SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey){
- HashElem *elem; /* The element that matches key */
- unsigned int h; /* A hash on key */
-
- assert( pH!=0 );
- assert( pKey!=0 );
- elem = findElementWithHash(pH, pKey, &h);
- return elem ? elem->data : 0;
-}
-
-/* Insert an element into the hash table pH. The key is pKey
-** and the data is "data".
-**
-** If no element exists with a matching key, then a new
-** element is created and NULL is returned.
-**
-** If another element already exists with the same key, then the
-** new data replaces the old data and the old data is returned.
-** The key is not copied in this instance. If a malloc fails, then
-** the new data is returned and the hash table is unchanged.
-**
-** If the "data" parameter to this function is NULL, then the
-** element corresponding to "key" is removed from the hash table.
-*/
-SQLITE_PRIVATE void *sqlite3HashInsert(Hash *pH, const char *pKey, void *data){
- unsigned int h; /* the hash of the key modulo hash table size */
- HashElem *elem; /* Used to loop thru the element list */
- HashElem *new_elem; /* New element added to the pH */
-
- assert( pH!=0 );
- assert( pKey!=0 );
- elem = findElementWithHash(pH,pKey,&h);
- if( elem ){
- void *old_data = elem->data;
- if( data==0 ){
- removeElementGivenHash(pH,elem,h);
- }else{
- elem->data = data;
- elem->pKey = pKey;
- }
- return old_data;
- }
- if( data==0 ) return 0;
- new_elem = (HashElem*)sqlite3Malloc( sizeof(HashElem) );
- if( new_elem==0 ) return data;
- new_elem->pKey = pKey;
- new_elem->data = data;
- pH->count++;
- if( pH->count>=10 && pH->count > 2*pH->htsize ){
- if( rehash(pH, pH->count*2) ){
- assert( pH->htsize>0 );
- h = strHash(pKey) % pH->htsize;
- }
- }
- insertElement(pH, pH->ht ? &pH->ht[h] : 0, new_elem);
- return 0;
-}
-
-/************** End of hash.c ************************************************/
-/************** Begin file opcodes.c *****************************************/
-/* Automatically generated. Do not edit */
-/* See the tool/mkopcodec.tcl script for details. */
-#if !defined(SQLITE_OMIT_EXPLAIN) \
- || defined(VDBE_PROFILE) \
- || defined(SQLITE_DEBUG)
-#if defined(SQLITE_ENABLE_EXPLAIN_COMMENTS) || defined(SQLITE_DEBUG)
-# define OpHelp(X) "\0" X
-#else
-# define OpHelp(X)
-#endif
-SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){
- static const char *const azName[] = {
- /* 0 */ "Savepoint" OpHelp(""),
- /* 1 */ "AutoCommit" OpHelp(""),
- /* 2 */ "Transaction" OpHelp(""),
- /* 3 */ "SorterNext" OpHelp(""),
- /* 4 */ "PrevIfOpen" OpHelp(""),
- /* 5 */ "NextIfOpen" OpHelp(""),
- /* 6 */ "Prev" OpHelp(""),
- /* 7 */ "Next" OpHelp(""),
- /* 8 */ "Checkpoint" OpHelp(""),
- /* 9 */ "JournalMode" OpHelp(""),
- /* 10 */ "Vacuum" OpHelp(""),
- /* 11 */ "VFilter" OpHelp("iplan=r[P3] zplan='P4'"),
- /* 12 */ "VUpdate" OpHelp("data=r[P3@P2]"),
- /* 13 */ "Goto" OpHelp(""),
- /* 14 */ "Gosub" OpHelp(""),
- /* 15 */ "InitCoroutine" OpHelp(""),
- /* 16 */ "Yield" OpHelp(""),
- /* 17 */ "MustBeInt" OpHelp(""),
- /* 18 */ "Jump" OpHelp(""),
- /* 19 */ "Not" OpHelp("r[P2]= !r[P1]"),
- /* 20 */ "Once" OpHelp(""),
- /* 21 */ "If" OpHelp(""),
- /* 22 */ "IfNot" OpHelp(""),
- /* 23 */ "SeekLT" OpHelp("key=r[P3@P4]"),
- /* 24 */ "SeekLE" OpHelp("key=r[P3@P4]"),
- /* 25 */ "SeekGE" OpHelp("key=r[P3@P4]"),
- /* 26 */ "SeekGT" OpHelp("key=r[P3@P4]"),
- /* 27 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"),
- /* 28 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"),
- /* 29 */ "NoConflict" OpHelp("key=r[P3@P4]"),
- /* 30 */ "NotFound" OpHelp("key=r[P3@P4]"),
- /* 31 */ "Found" OpHelp("key=r[P3@P4]"),
- /* 32 */ "NotExists" OpHelp("intkey=r[P3]"),
- /* 33 */ "Last" OpHelp(""),
- /* 34 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"),
- /* 35 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"),
- /* 36 */ "Ne" OpHelp("if r[P1]!=r[P3] goto P2"),
- /* 37 */ "Eq" OpHelp("if r[P1]==r[P3] goto P2"),
- /* 38 */ "Gt" OpHelp("if r[P1]>r[P3] goto P2"),
- /* 39 */ "Le" OpHelp("if r[P1]<=r[P3] goto P2"),
- /* 40 */ "Lt" OpHelp("if r[P1]=r[P3] goto P2"),
- /* 42 */ "SorterSort" OpHelp(""),
- /* 43 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"),
- /* 44 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"),
- /* 45 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<>r[P1]"),
- /* 47 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"),
- /* 48 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"),
- /* 49 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"),
- /* 50 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"),
- /* 51 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"),
- /* 52 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"),
- /* 53 */ "Sort" OpHelp(""),
- /* 54 */ "BitNot" OpHelp("r[P1]= ~r[P1]"),
- /* 55 */ "Rewind" OpHelp(""),
- /* 56 */ "IdxLE" OpHelp("key=r[P3@P4]"),
- /* 57 */ "IdxGT" OpHelp("key=r[P3@P4]"),
- /* 58 */ "IdxLT" OpHelp("key=r[P3@P4]"),
- /* 59 */ "IdxGE" OpHelp("key=r[P3@P4]"),
- /* 60 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"),
- /* 61 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"),
- /* 62 */ "Program" OpHelp(""),
- /* 63 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"),
- /* 64 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"),
- /* 65 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]-=P3, goto P2"),
- /* 66 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"),
- /* 67 */ "IncrVacuum" OpHelp(""),
- /* 68 */ "VNext" OpHelp(""),
- /* 69 */ "Init" OpHelp("Start at P2"),
- /* 70 */ "Return" OpHelp(""),
- /* 71 */ "EndCoroutine" OpHelp(""),
- /* 72 */ "HaltIfNull" OpHelp("if r[P3]=null halt"),
- /* 73 */ "Halt" OpHelp(""),
- /* 74 */ "Integer" OpHelp("r[P2]=P1"),
- /* 75 */ "Int64" OpHelp("r[P2]=P4"),
- /* 76 */ "String" OpHelp("r[P2]='P4' (len=P1)"),
- /* 77 */ "Null" OpHelp("r[P2..P3]=NULL"),
- /* 78 */ "SoftNull" OpHelp("r[P1]=NULL"),
- /* 79 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"),
- /* 80 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"),
- /* 81 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"),
- /* 82 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"),
- /* 83 */ "SCopy" OpHelp("r[P2]=r[P1]"),
- /* 84 */ "IntCopy" OpHelp("r[P2]=r[P1]"),
- /* 85 */ "ResultRow" OpHelp("output=r[P1@P2]"),
- /* 86 */ "CollSeq" OpHelp(""),
- /* 87 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"),
- /* 88 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"),
- /* 89 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"),
- /* 90 */ "RealAffinity" OpHelp(""),
- /* 91 */ "Cast" OpHelp("affinity(r[P1])"),
- /* 92 */ "Permutation" OpHelp(""),
- /* 93 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"),
- /* 94 */ "Column" OpHelp("r[P3]=PX"),
- /* 95 */ "Affinity" OpHelp("affinity(r[P1@P2])"),
- /* 96 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"),
- /* 97 */ "String8" OpHelp("r[P2]='P4'"),
- /* 98 */ "Count" OpHelp("r[P2]=count()"),
- /* 99 */ "ReadCookie" OpHelp(""),
- /* 100 */ "SetCookie" OpHelp(""),
- /* 101 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"),
- /* 102 */ "OpenRead" OpHelp("root=P2 iDb=P3"),
- /* 103 */ "OpenWrite" OpHelp("root=P2 iDb=P3"),
- /* 104 */ "OpenAutoindex" OpHelp("nColumn=P2"),
- /* 105 */ "OpenEphemeral" OpHelp("nColumn=P2"),
- /* 106 */ "SorterOpen" OpHelp(""),
- /* 107 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"),
- /* 108 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"),
- /* 109 */ "Close" OpHelp(""),
- /* 110 */ "ColumnsUsed" OpHelp(""),
- /* 111 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"),
- /* 112 */ "NewRowid" OpHelp("r[P2]=rowid"),
- /* 113 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"),
- /* 114 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"),
- /* 115 */ "Delete" OpHelp(""),
- /* 116 */ "ResetCount" OpHelp(""),
- /* 117 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"),
- /* 118 */ "SorterData" OpHelp("r[P2]=data"),
- /* 119 */ "RowKey" OpHelp("r[P2]=key"),
- /* 120 */ "RowData" OpHelp("r[P2]=data"),
- /* 121 */ "Rowid" OpHelp("r[P2]=rowid"),
- /* 122 */ "NullRow" OpHelp(""),
- /* 123 */ "SorterInsert" OpHelp(""),
- /* 124 */ "IdxInsert" OpHelp("key=r[P2]"),
- /* 125 */ "IdxDelete" OpHelp("key=r[P2@P3]"),
- /* 126 */ "Seek" OpHelp("Move P3 to P1.rowid"),
- /* 127 */ "IdxRowid" OpHelp("r[P2]=rowid"),
- /* 128 */ "Destroy" OpHelp(""),
- /* 129 */ "Clear" OpHelp(""),
- /* 130 */ "ResetSorter" OpHelp(""),
- /* 131 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"),
- /* 132 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"),
- /* 133 */ "Real" OpHelp("r[P2]=P4"),
- /* 134 */ "ParseSchema" OpHelp(""),
- /* 135 */ "LoadAnalysis" OpHelp(""),
- /* 136 */ "DropTable" OpHelp(""),
- /* 137 */ "DropIndex" OpHelp(""),
- /* 138 */ "DropTrigger" OpHelp(""),
- /* 139 */ "IntegrityCk" OpHelp(""),
- /* 140 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"),
- /* 141 */ "Param" OpHelp(""),
- /* 142 */ "FkCounter" OpHelp("fkctr[P1]+=P2"),
- /* 143 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"),
- /* 144 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"),
- /* 145 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"),
- /* 146 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"),
- /* 147 */ "AggFinal" OpHelp("accum=r[P1] N=P2"),
- /* 148 */ "Expire" OpHelp(""),
- /* 149 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"),
- /* 150 */ "VBegin" OpHelp(""),
- /* 151 */ "VCreate" OpHelp(""),
- /* 152 */ "VDestroy" OpHelp(""),
- /* 153 */ "VOpen" OpHelp(""),
- /* 154 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"),
- /* 155 */ "VRename" OpHelp(""),
- /* 156 */ "Pagecount" OpHelp(""),
- /* 157 */ "MaxPgcnt" OpHelp(""),
- /* 158 */ "CursorHint" OpHelp(""),
- /* 159 */ "Noop" OpHelp(""),
- /* 160 */ "Explain" OpHelp(""),
- };
- return azName[i];
-}
-#endif
-
-/************** End of opcodes.c *********************************************/
-/************** Begin file os_unix.c *****************************************/
-/*
-** 2004 May 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains the VFS implementation for unix-like operating systems
-** include Linux, MacOSX, *BSD, QNX, VxWorks, AIX, HPUX, and others.
-**
-** There are actually several different VFS implementations in this file.
-** The differences are in the way that file locking is done. The default
-** implementation uses Posix Advisory Locks. Alternative implementations
-** use flock(), dot-files, various proprietary locking schemas, or simply
-** skip locking all together.
-**
-** This source file is organized into divisions where the logic for various
-** subfunctions is contained within the appropriate division. PLEASE
-** KEEP THE STRUCTURE OF THIS FILE INTACT. New code should be placed
-** in the correct division and should be clearly labeled.
-**
-** The layout of divisions is as follows:
-**
-** * General-purpose declarations and utility functions.
-** * Unique file ID logic used by VxWorks.
-** * Various locking primitive implementations (all except proxy locking):
-** + for Posix Advisory Locks
-** + for no-op locks
-** + for dot-file locks
-** + for flock() locking
-** + for named semaphore locks (VxWorks only)
-** + for AFP filesystem locks (MacOSX only)
-** * sqlite3_file methods not associated with locking.
-** * Definitions of sqlite3_io_methods objects for all locking
-** methods plus "finder" functions for each locking method.
-** * sqlite3_vfs method implementations.
-** * Locking primitives for the proxy uber-locking-method. (MacOSX only)
-** * Definitions of sqlite3_vfs objects for all locking methods
-** plus implementations of sqlite3_os_init() and sqlite3_os_end().
-*/
-/* #include "sqliteInt.h" */
-#if SQLITE_OS_UNIX /* This file is used on unix only */
-
-/*
-** There are various methods for file locking used for concurrency
-** control:
-**
-** 1. POSIX locking (the default),
-** 2. No locking,
-** 3. Dot-file locking,
-** 4. flock() locking,
-** 5. AFP locking (OSX only),
-** 6. Named POSIX semaphores (VXWorks only),
-** 7. proxy locking. (OSX only)
-**
-** Styles 4, 5, and 7 are only available of SQLITE_ENABLE_LOCKING_STYLE
-** is defined to 1. The SQLITE_ENABLE_LOCKING_STYLE also enables automatic
-** selection of the appropriate locking style based on the filesystem
-** where the database is located.
-*/
-#if !defined(SQLITE_ENABLE_LOCKING_STYLE)
-# if defined(__APPLE__)
-# define SQLITE_ENABLE_LOCKING_STYLE 1
-# else
-# define SQLITE_ENABLE_LOCKING_STYLE 0
-# endif
-#endif
-
-/* Use pread() and pwrite() if they are available */
-#if defined(__APPLE__)
-# define HAVE_PREAD 1
-# define HAVE_PWRITE 1
-#endif
-#if defined(HAVE_PREAD64) && defined(HAVE_PWRITE64)
-# undef USE_PREAD
-# define USE_PREAD64 1
-#elif defined(HAVE_PREAD) && defined(HAVE_PWRITE)
-# undef USE_PREAD64
-# define USE_PREAD 1
-#endif
-
-/*
-** standard include files.
-*/
-#include
-#include
-#include
-#include
-/* #include */
-#include
-#include
-#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
-# include
-#endif
-
-#if SQLITE_ENABLE_LOCKING_STYLE
-# include
-# include
-# include
-#endif /* SQLITE_ENABLE_LOCKING_STYLE */
-
-#if defined(__APPLE__) && ((__MAC_OS_X_VERSION_MIN_REQUIRED > 1050) || \
- (__IPHONE_OS_VERSION_MIN_REQUIRED > 2000))
-# if (!defined(TARGET_OS_EMBEDDED) || (TARGET_OS_EMBEDDED==0)) \
- && (!defined(TARGET_IPHONE_SIMULATOR) || (TARGET_IPHONE_SIMULATOR==0))
-# define HAVE_GETHOSTUUID 1
-# else
-# warning "gethostuuid() is disabled."
-# endif
-#endif
-
-
-#if OS_VXWORKS
-/* # include */
-# include
-# include
-#endif /* OS_VXWORKS */
-
-#if defined(__APPLE__) || SQLITE_ENABLE_LOCKING_STYLE
-# include
-#endif
-
-#ifdef HAVE_UTIME
-# include
-#endif
-
-/*
-** Allowed values of unixFile.fsFlags
-*/
-#define SQLITE_FSFLAGS_IS_MSDOS 0x1
-
-/*
-** If we are to be thread-safe, include the pthreads header and define
-** the SQLITE_UNIX_THREADS macro.
-*/
-#if SQLITE_THREADSAFE
-/* # include */
-# define SQLITE_UNIX_THREADS 1
-#endif
-
-/*
-** Default permissions when creating a new file
-*/
-#ifndef SQLITE_DEFAULT_FILE_PERMISSIONS
-# define SQLITE_DEFAULT_FILE_PERMISSIONS 0644
-#endif
-
-/*
-** Default permissions when creating auto proxy dir
-*/
-#ifndef SQLITE_DEFAULT_PROXYDIR_PERMISSIONS
-# define SQLITE_DEFAULT_PROXYDIR_PERMISSIONS 0755
-#endif
-
-/*
-** Maximum supported path-length.
-*/
-#define MAX_PATHNAME 512
-
-/*
-** Maximum supported symbolic links
-*/
-#define SQLITE_MAX_SYMLINKS 100
-
-/* Always cast the getpid() return type for compatibility with
-** kernel modules in VxWorks. */
-#define osGetpid(X) (pid_t)getpid()
-
-/*
-** Only set the lastErrno if the error code is a real error and not
-** a normal expected return code of SQLITE_BUSY or SQLITE_OK
-*/
-#define IS_LOCK_ERROR(x) ((x != SQLITE_OK) && (x != SQLITE_BUSY))
-
-/* Forward references */
-typedef struct unixShm unixShm; /* Connection shared memory */
-typedef struct unixShmNode unixShmNode; /* Shared memory instance */
-typedef struct unixInodeInfo unixInodeInfo; /* An i-node */
-typedef struct UnixUnusedFd UnixUnusedFd; /* An unused file descriptor */
-
-/*
-** Sometimes, after a file handle is closed by SQLite, the file descriptor
-** cannot be closed immediately. In these cases, instances of the following
-** structure are used to store the file descriptor while waiting for an
-** opportunity to either close or reuse it.
-*/
-struct UnixUnusedFd {
- int fd; /* File descriptor to close */
- int flags; /* Flags this file descriptor was opened with */
- UnixUnusedFd *pNext; /* Next unused file descriptor on same file */
-};
-
-/*
-** The unixFile structure is subclass of sqlite3_file specific to the unix
-** VFS implementations.
-*/
-typedef struct unixFile unixFile;
-struct unixFile {
- sqlite3_io_methods const *pMethod; /* Always the first entry */
- sqlite3_vfs *pVfs; /* The VFS that created this unixFile */
- unixInodeInfo *pInode; /* Info about locks on this inode */
- int h; /* The file descriptor */
- unsigned char eFileLock; /* The type of lock held on this fd */
- unsigned short int ctrlFlags; /* Behavioral bits. UNIXFILE_* flags */
- int lastErrno; /* The unix errno from last I/O error */
- void *lockingContext; /* Locking style specific state */
- UnixUnusedFd *pUnused; /* Pre-allocated UnixUnusedFd */
- const char *zPath; /* Name of the file */
- unixShm *pShm; /* Shared memory segment information */
- int szChunk; /* Configured by FCNTL_CHUNK_SIZE */
-#if SQLITE_MAX_MMAP_SIZE>0
- int nFetchOut; /* Number of outstanding xFetch refs */
- sqlite3_int64 mmapSize; /* Usable size of mapping at pMapRegion */
- sqlite3_int64 mmapSizeActual; /* Actual size of mapping at pMapRegion */
- sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */
- void *pMapRegion; /* Memory mapped region */
-#endif
-#ifdef __QNXNTO__
- int sectorSize; /* Device sector size */
- int deviceCharacteristics; /* Precomputed device characteristics */
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE
- int openFlags; /* The flags specified at open() */
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__)
- unsigned fsFlags; /* cached details from statfs() */
-#endif
-#if OS_VXWORKS
- struct vxworksFileId *pId; /* Unique file ID */
-#endif
-#ifdef SQLITE_DEBUG
- /* The next group of variables are used to track whether or not the
- ** transaction counter in bytes 24-27 of database files are updated
- ** whenever any part of the database changes. An assertion fault will
- ** occur if a file is updated without also updating the transaction
- ** counter. This test is made to avoid new problems similar to the
- ** one described by ticket #3584.
- */
- unsigned char transCntrChng; /* True if the transaction counter changed */
- unsigned char dbUpdate; /* True if any part of database file changed */
- unsigned char inNormalWrite; /* True if in a normal write operation */
-
-#endif
-
-#ifdef SQLITE_TEST
- /* In test mode, increase the size of this structure a bit so that
- ** it is larger than the struct CrashFile defined in test6.c.
- */
- char aPadding[32];
-#endif
-};
-
-/* This variable holds the process id (pid) from when the xRandomness()
-** method was called. If xOpen() is called from a different process id,
-** indicating that a fork() has occurred, the PRNG will be reset.
-*/
-static pid_t randomnessPid = 0;
-
-/*
-** Allowed values for the unixFile.ctrlFlags bitmask:
-*/
-#define UNIXFILE_EXCL 0x01 /* Connections from one process only */
-#define UNIXFILE_RDONLY 0x02 /* Connection is read only */
-#define UNIXFILE_PERSIST_WAL 0x04 /* Persistent WAL mode */
-#ifndef SQLITE_DISABLE_DIRSYNC
-# define UNIXFILE_DIRSYNC 0x08 /* Directory sync needed */
-#else
-# define UNIXFILE_DIRSYNC 0x00
-#endif
-#define UNIXFILE_PSOW 0x10 /* SQLITE_IOCAP_POWERSAFE_OVERWRITE */
-#define UNIXFILE_DELETE 0x20 /* Delete on close */
-#define UNIXFILE_URI 0x40 /* Filename might have query parameters */
-#define UNIXFILE_NOLOCK 0x80 /* Do no file locking */
-
-/*
-** Include code that is common to all os_*.c files
-*/
-/************** Include os_common.h in the middle of os_unix.c ***************/
-/************** Begin file os_common.h ***************************************/
-/*
-** 2004 May 22
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains macros and a little bit of code that is common to
-** all of the platform-specific files (os_*.c) and is #included into those
-** files.
-**
-** This file should be #included by the os_*.c files only. It is not a
-** general purpose header file.
-*/
-#ifndef _OS_COMMON_H_
-#define _OS_COMMON_H_
-
-/*
-** At least two bugs have slipped in because we changed the MEMORY_DEBUG
-** macro to SQLITE_DEBUG and some older makefiles have not yet made the
-** switch. The following code should catch this problem at compile-time.
-*/
-#ifdef MEMORY_DEBUG
-# error "The MEMORY_DEBUG macro is obsolete. Use SQLITE_DEBUG instead."
-#endif
-
-/*
-** Macros for performance tracing. Normally turned off. Only works
-** on i486 hardware.
-*/
-#ifdef SQLITE_PERFORMANCE_TRACE
-
-/*
-** hwtime.h contains inline assembler code for implementing
-** high-performance timing routines.
-*/
-/************** Include hwtime.h in the middle of os_common.h ****************/
-/************** Begin file hwtime.h ******************************************/
-/*
-** 2008 May 27
-**
-** The author disclaims copyright to this source code. In place of
-** a legal notice, here is a blessing:
-**
-** May you do good and not evil.
-** May you find forgiveness for yourself and forgive others.
-** May you share freely, never taking more than you give.
-**
-******************************************************************************
-**
-** This file contains inline asm code for retrieving "high-performance"
-** counters for x86 class CPUs.
-*/
-#ifndef _HWTIME_H_
-#define _HWTIME_H_
-
-/*
-** The following routine only works on pentium-class (or newer) processors.
-** It uses the RDTSC opcode to read the cycle count value out of the
-** processor and returns that value. This can be used for high-res
-** profiling.
-*/
-#if (defined(__GNUC__) || defined(_MSC_VER)) && \
- (defined(i386) || defined(__i386__) || defined(_M_IX86))
-
- #if defined(__GNUC__)
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned int lo, hi;
- __asm__ __volatile__ ("rdtsc" : "=a" (lo), "=d" (hi));
- return (sqlite_uint64)hi << 32 | lo;
- }
-
- #elif defined(_MSC_VER)
-
- __declspec(naked) __inline sqlite_uint64 __cdecl sqlite3Hwtime(void){
- __asm {
- rdtsc
- ret ; return value at EDX:EAX
- }
- }
-
- #endif
-
-#elif (defined(__GNUC__) && defined(__x86_64__))
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned long val;
- __asm__ __volatile__ ("rdtsc" : "=A" (val));
- return val;
- }
-
-#elif (defined(__GNUC__) && defined(__ppc__))
-
- __inline__ sqlite_uint64 sqlite3Hwtime(void){
- unsigned long long retval;
- unsigned long junk;
- __asm__ __volatile__ ("\n\
- 1: mftbu %1\n\
- mftb %L0\n\
- mftbu %0\n\
- cmpw %0,%1\n\
- bne 1b"
- : "=r" (retval), "=r" (junk));
- return retval;
- }
-
-#else
-
- #error Need implementation of sqlite3Hwtime() for your platform.
-
- /*
- ** To compile without implementing sqlite3Hwtime() for your platform,
- ** you can remove the above #error and use the following
- ** stub function. You will lose timing support for many
- ** of the debugging and testing utilities, but it should at
- ** least compile and run.
- */
-SQLITE_PRIVATE sqlite_uint64 sqlite3Hwtime(void){ return ((sqlite_uint64)0); }
-
-#endif
-
-#endif /* !defined(_HWTIME_H_) */
-
-/************** End of hwtime.h **********************************************/
-/************** Continuing where we left off in os_common.h ******************/
-
-static sqlite_uint64 g_start;
-static sqlite_uint64 g_elapsed;
-#define TIMER_START g_start=sqlite3Hwtime()
-#define TIMER_END g_elapsed=sqlite3Hwtime()-g_start
-#define TIMER_ELAPSED g_elapsed
-#else
-#define TIMER_START
-#define TIMER_END
-#define TIMER_ELAPSED ((sqlite_uint64)0)
-#endif
-
-/*
-** If we compile with the SQLITE_TEST macro set, then the following block
-** of code will give us the ability to simulate a disk I/O error. This
-** is used for testing the I/O recovery logic.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API extern int sqlite3_io_error_hit;
-SQLITE_API extern int sqlite3_io_error_hardhit;
-SQLITE_API extern int sqlite3_io_error_pending;
-SQLITE_API extern int sqlite3_io_error_persist;
-SQLITE_API extern int sqlite3_io_error_benign;
-SQLITE_API extern int sqlite3_diskfull_pending;
-SQLITE_API extern int sqlite3_diskfull;
-#define SimulateIOErrorBenign(X) sqlite3_io_error_benign=(X)
-#define SimulateIOError(CODE) \
- if( (sqlite3_io_error_persist && sqlite3_io_error_hit) \
- || sqlite3_io_error_pending-- == 1 ) \
- { local_ioerr(); CODE; }
-static void local_ioerr(){
- IOTRACE(("IOERR\n"));
- sqlite3_io_error_hit++;
- if( !sqlite3_io_error_benign ) sqlite3_io_error_hardhit++;
-}
-#define SimulateDiskfullError(CODE) \
- if( sqlite3_diskfull_pending ){ \
- if( sqlite3_diskfull_pending == 1 ){ \
- local_ioerr(); \
- sqlite3_diskfull = 1; \
- sqlite3_io_error_hit = 1; \
- CODE; \
- }else{ \
- sqlite3_diskfull_pending--; \
- } \
- }
-#else
-#define SimulateIOErrorBenign(X)
-#define SimulateIOError(A)
-#define SimulateDiskfullError(A)
-#endif /* defined(SQLITE_TEST) */
-
-/*
-** When testing, keep a count of the number of open files.
-*/
-#if defined(SQLITE_TEST)
-SQLITE_API extern int sqlite3_open_file_count;
-#define OpenCounter(X) sqlite3_open_file_count+=(X)
-#else
-#define OpenCounter(X)
-#endif /* defined(SQLITE_TEST) */
-
-#endif /* !defined(_OS_COMMON_H_) */
-
-/************** End of os_common.h *******************************************/
-/************** Continuing where we left off in os_unix.c ********************/
-
-/*
-** Define various macros that are missing from some systems.
-*/
-#ifndef O_LARGEFILE
-# define O_LARGEFILE 0
-#endif
-#ifdef SQLITE_DISABLE_LFS
-# undef O_LARGEFILE
-# define O_LARGEFILE 0
-#endif
-#ifndef O_NOFOLLOW
-# define O_NOFOLLOW 0
-#endif
-#ifndef O_BINARY
-# define O_BINARY 0
-#endif
-
-/*
-** The threadid macro resolves to the thread-id or to 0. Used for
-** testing and debugging only.
-*/
-#if SQLITE_THREADSAFE
-#define threadid pthread_self()
-#else
-#define threadid 0
-#endif
-
-/*
-** HAVE_MREMAP defaults to true on Linux and false everywhere else.
-*/
-#if !defined(HAVE_MREMAP)
-# if defined(__linux__) && defined(_GNU_SOURCE)
-# define HAVE_MREMAP 1
-# else
-# define HAVE_MREMAP 0
-# endif
-#endif
-
-/*
-** Explicitly call the 64-bit version of lseek() on Android. Otherwise, lseek()
-** is the 32-bit version, even if _FILE_OFFSET_BITS=64 is defined.
-*/
-#ifdef __ANDROID__
-# define lseek lseek64
-#endif
-
-/*
-** Different Unix systems declare open() in different ways. Same use
-** open(const char*,int,mode_t). Others use open(const char*,int,...).
-** The difference is important when using a pointer to the function.
-**
-** The safest way to deal with the problem is to always use this wrapper
-** which always has the same well-defined interface.
-*/
-static int posixOpen(const char *zFile, int flags, int mode){
- return open(zFile, flags, mode);
-}
-
-/* Forward reference */
-static int openDirectory(const char*, int*);
-static int unixGetpagesize(void);
-
-/*
-** Many system calls are accessed through pointer-to-functions so that
-** they may be overridden at runtime to facilitate fault injection during
-** testing and sandboxing. The following array holds the names and pointers
-** to all overrideable system calls.
-*/
-static struct unix_syscall {
- const char *zName; /* Name of the system call */
- sqlite3_syscall_ptr pCurrent; /* Current value of the system call */
- sqlite3_syscall_ptr pDefault; /* Default value */
-} aSyscall[] = {
- { "open", (sqlite3_syscall_ptr)posixOpen, 0 },
-#define osOpen ((int(*)(const char*,int,int))aSyscall[0].pCurrent)
-
- { "close", (sqlite3_syscall_ptr)close, 0 },
-#define osClose ((int(*)(int))aSyscall[1].pCurrent)
-
- { "access", (sqlite3_syscall_ptr)access, 0 },
-#define osAccess ((int(*)(const char*,int))aSyscall[2].pCurrent)
-
- { "getcwd", (sqlite3_syscall_ptr)getcwd, 0 },
-#define osGetcwd ((char*(*)(char*,size_t))aSyscall[3].pCurrent)
-
- { "stat", (sqlite3_syscall_ptr)stat, 0 },
-#define osStat ((int(*)(const char*,struct stat*))aSyscall[4].pCurrent)
-
-/*
-** The DJGPP compiler environment looks mostly like Unix, but it
-** lacks the fcntl() system call. So redefine fcntl() to be something
-** that always succeeds. This means that locking does not occur under
-** DJGPP. But it is DOS - what did you expect?
-*/
-#ifdef __DJGPP__
- { "fstat", 0, 0 },
-#define osFstat(a,b,c) 0
-#else
- { "fstat", (sqlite3_syscall_ptr)fstat, 0 },
-#define osFstat ((int(*)(int,struct stat*))aSyscall[5].pCurrent)
-#endif
-
- { "ftruncate", (sqlite3_syscall_ptr)ftruncate, 0 },
-#define osFtruncate ((int(*)(int,off_t))aSyscall[6].pCurrent)
-
- { "fcntl", (sqlite3_syscall_ptr)fcntl, 0 },
-#define osFcntl ((int(*)(int,int,...))aSyscall[7].pCurrent)
-
- { "read", (sqlite3_syscall_ptr)read, 0 },
-#define osRead ((ssize_t(*)(int,void*,size_t))aSyscall[8].pCurrent)
-
-#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE
- { "pread", (sqlite3_syscall_ptr)pread, 0 },
-#else
- { "pread", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osPread ((ssize_t(*)(int,void*,size_t,off_t))aSyscall[9].pCurrent)
-
-#if defined(USE_PREAD64)
- { "pread64", (sqlite3_syscall_ptr)pread64, 0 },
-#else
- { "pread64", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osPread64 ((ssize_t(*)(int,void*,size_t,off64_t))aSyscall[10].pCurrent)
-
- { "write", (sqlite3_syscall_ptr)write, 0 },
-#define osWrite ((ssize_t(*)(int,const void*,size_t))aSyscall[11].pCurrent)
-
-#if defined(USE_PREAD) || SQLITE_ENABLE_LOCKING_STYLE
- { "pwrite", (sqlite3_syscall_ptr)pwrite, 0 },
-#else
- { "pwrite", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osPwrite ((ssize_t(*)(int,const void*,size_t,off_t))\
- aSyscall[12].pCurrent)
-
-#if defined(USE_PREAD64)
- { "pwrite64", (sqlite3_syscall_ptr)pwrite64, 0 },
-#else
- { "pwrite64", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osPwrite64 ((ssize_t(*)(int,const void*,size_t,off64_t))\
- aSyscall[13].pCurrent)
-
- { "fchmod", (sqlite3_syscall_ptr)fchmod, 0 },
-#define osFchmod ((int(*)(int,mode_t))aSyscall[14].pCurrent)
-
-#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
- { "fallocate", (sqlite3_syscall_ptr)posix_fallocate, 0 },
-#else
- { "fallocate", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osFallocate ((int(*)(int,off_t,off_t))aSyscall[15].pCurrent)
-
- { "unlink", (sqlite3_syscall_ptr)unlink, 0 },
-#define osUnlink ((int(*)(const char*))aSyscall[16].pCurrent)
-
- { "openDirectory", (sqlite3_syscall_ptr)openDirectory, 0 },
-#define osOpenDirectory ((int(*)(const char*,int*))aSyscall[17].pCurrent)
-
- { "mkdir", (sqlite3_syscall_ptr)mkdir, 0 },
-#define osMkdir ((int(*)(const char*,mode_t))aSyscall[18].pCurrent)
-
- { "rmdir", (sqlite3_syscall_ptr)rmdir, 0 },
-#define osRmdir ((int(*)(const char*))aSyscall[19].pCurrent)
-
-#if defined(HAVE_FCHOWN)
- { "fchown", (sqlite3_syscall_ptr)fchown, 0 },
-#else
- { "fchown", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osFchown ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent)
-
- { "geteuid", (sqlite3_syscall_ptr)geteuid, 0 },
-#define osGeteuid ((uid_t(*)(void))aSyscall[21].pCurrent)
-
-#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
- { "mmap", (sqlite3_syscall_ptr)mmap, 0 },
-#else
- { "mmap", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osMmap ((void*(*)(void*,size_t,int,int,int,off_t))aSyscall[22].pCurrent)
-
-#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
- { "munmap", (sqlite3_syscall_ptr)munmap, 0 },
-#else
- { "munmap", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osMunmap ((void*(*)(void*,size_t))aSyscall[23].pCurrent)
-
-#if HAVE_MREMAP && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0)
- { "mremap", (sqlite3_syscall_ptr)mremap, 0 },
-#else
- { "mremap", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osMremap ((void*(*)(void*,size_t,size_t,int,...))aSyscall[24].pCurrent)
-
-#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
- { "getpagesize", (sqlite3_syscall_ptr)unixGetpagesize, 0 },
-#else
- { "getpagesize", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osGetpagesize ((int(*)(void))aSyscall[25].pCurrent)
-
-#if defined(HAVE_READLINK)
- { "readlink", (sqlite3_syscall_ptr)readlink, 0 },
-#else
- { "readlink", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osReadlink ((ssize_t(*)(const char*,char*,size_t))aSyscall[26].pCurrent)
-
-#if defined(HAVE_LSTAT)
- { "lstat", (sqlite3_syscall_ptr)lstat, 0 },
-#else
- { "lstat", (sqlite3_syscall_ptr)0, 0 },
-#endif
-#define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent)
-
-}; /* End of the overrideable system calls */
-
-
-/*
-** On some systems, calls to fchown() will trigger a message in a security
-** log if they come from non-root processes. So avoid calling fchown() if
-** we are not running as root.
-*/
-static int robustFchown(int fd, uid_t uid, gid_t gid){
-#if defined(HAVE_FCHOWN)
- return osGeteuid() ? 0 : osFchown(fd,uid,gid);
-#else
- return 0;
-#endif
-}
-
-/*
-** This is the xSetSystemCall() method of sqlite3_vfs for all of the
-** "unix" VFSes. Return SQLITE_OK opon successfully updating the
-** system call pointer, or SQLITE_NOTFOUND if there is no configurable
-** system call named zName.
-*/
-static int unixSetSystemCall(
- sqlite3_vfs *pNotUsed, /* The VFS pointer. Not used */
- const char *zName, /* Name of system call to override */
- sqlite3_syscall_ptr pNewFunc /* Pointer to new system call value */
-){
- unsigned int i;
- int rc = SQLITE_NOTFOUND;
-
- UNUSED_PARAMETER(pNotUsed);
- if( zName==0 ){
- /* If no zName is given, restore all system calls to their default
- ** settings and return NULL
- */
- rc = SQLITE_OK;
- for(i=0; i=SQLITE_MINIMUM_FILE_DESCRIPTOR ) break;
- osClose(fd);
- sqlite3_log(SQLITE_WARNING,
- "attempt to open \"%s\" as file descriptor %d", z, fd);
- fd = -1;
- if( osOpen("/dev/null", f, m)<0 ) break;
- }
- if( fd>=0 ){
- if( m!=0 ){
- struct stat statbuf;
- if( osFstat(fd, &statbuf)==0
- && statbuf.st_size==0
- && (statbuf.st_mode&0777)!=m
- ){
- osFchmod(fd, m);
- }
- }
-#if defined(FD_CLOEXEC) && (!defined(O_CLOEXEC) || O_CLOEXEC==0)
- osFcntl(fd, F_SETFD, osFcntl(fd, F_GETFD, 0) | FD_CLOEXEC);
-#endif
- }
- return fd;
-}
-
-/*
-** Helper functions to obtain and relinquish the global mutex. The
-** global mutex is used to protect the unixInodeInfo and
-** vxworksFileId objects used by this file, all of which may be
-** shared by multiple threads.
-**
-** Function unixMutexHeld() is used to assert() that the global mutex
-** is held when required. This function is only used as part of assert()
-** statements. e.g.
-**
-** unixEnterMutex()
-** assert( unixMutexHeld() );
-** unixEnterLeave()
-*/
-static void unixEnterMutex(void){
- sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
-}
-static void unixLeaveMutex(void){
- sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
-}
-#ifdef SQLITE_DEBUG
-static int unixMutexHeld(void) {
- return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1));
-}
-#endif
-
-
-#ifdef SQLITE_HAVE_OS_TRACE
-/*
-** Helper function for printing out trace information from debugging
-** binaries. This returns the string representation of the supplied
-** integer lock-type.
-*/
-static const char *azFileLock(int eFileLock){
- switch( eFileLock ){
- case NO_LOCK: return "NONE";
- case SHARED_LOCK: return "SHARED";
- case RESERVED_LOCK: return "RESERVED";
- case PENDING_LOCK: return "PENDING";
- case EXCLUSIVE_LOCK: return "EXCLUSIVE";
- }
- return "ERROR";
-}
-#endif
-
-#ifdef SQLITE_LOCK_TRACE
-/*
-** Print out information about all locking operations.
-**
-** This routine is used for troubleshooting locks on multithreaded
-** platforms. Enable by compiling with the -DSQLITE_LOCK_TRACE
-** command-line option on the compiler. This code is normally
-** turned off.
-*/
-static int lockTrace(int fd, int op, struct flock *p){
- char *zOpName, *zType;
- int s;
- int savedErrno;
- if( op==F_GETLK ){
- zOpName = "GETLK";
- }else if( op==F_SETLK ){
- zOpName = "SETLK";
- }else{
- s = osFcntl(fd, op, p);
- sqlite3DebugPrintf("fcntl unknown %d %d %d\n", fd, op, s);
- return s;
- }
- if( p->l_type==F_RDLCK ){
- zType = "RDLCK";
- }else if( p->l_type==F_WRLCK ){
- zType = "WRLCK";
- }else if( p->l_type==F_UNLCK ){
- zType = "UNLCK";
- }else{
- assert( 0 );
- }
- assert( p->l_whence==SEEK_SET );
- s = osFcntl(fd, op, p);
- savedErrno = errno;
- sqlite3DebugPrintf("fcntl %d %d %s %s %d %d %d %d\n",
- threadid, fd, zOpName, zType, (int)p->l_start, (int)p->l_len,
- (int)p->l_pid, s);
- if( s==(-1) && op==F_SETLK && (p->l_type==F_RDLCK || p->l_type==F_WRLCK) ){
- struct flock l2;
- l2 = *p;
- osFcntl(fd, F_GETLK, &l2);
- if( l2.l_type==F_RDLCK ){
- zType = "RDLCK";
- }else if( l2.l_type==F_WRLCK ){
- zType = "WRLCK";
- }else if( l2.l_type==F_UNLCK ){
- zType = "UNLCK";
- }else{
- assert( 0 );
- }
- sqlite3DebugPrintf("fcntl-failure-reason: %s %d %d %d\n",
- zType, (int)l2.l_start, (int)l2.l_len, (int)l2.l_pid);
- }
- errno = savedErrno;
- return s;
-}
-#undef osFcntl
-#define osFcntl lockTrace
-#endif /* SQLITE_LOCK_TRACE */
-
-/*
-** Retry ftruncate() calls that fail due to EINTR
-**
-** All calls to ftruncate() within this file should be made through
-** this wrapper. On the Android platform, bypassing the logic below
-** could lead to a corrupt database.
-*/
-static int robust_ftruncate(int h, sqlite3_int64 sz){
- int rc;
-#ifdef __ANDROID__
- /* On Android, ftruncate() always uses 32-bit offsets, even if
- ** _FILE_OFFSET_BITS=64 is defined. This means it is unsafe to attempt to
- ** truncate a file to any size larger than 2GiB. Silently ignore any
- ** such attempts. */
- if( sz>(sqlite3_int64)0x7FFFFFFF ){
- rc = SQLITE_OK;
- }else
-#endif
- do{ rc = osFtruncate(h,sz); }while( rc<0 && errno==EINTR );
- return rc;
-}
-
-/*
-** This routine translates a standard POSIX errno code into something
-** useful to the clients of the sqlite3 functions. Specifically, it is
-** intended to translate a variety of "try again" errors into SQLITE_BUSY
-** and a variety of "please close the file descriptor NOW" errors into
-** SQLITE_IOERR
-**
-** Errors during initialization of locks, or file system support for locks,
-** should handle ENOLCK, ENOTSUP, EOPNOTSUPP separately.
-*/
-static int sqliteErrorFromPosixError(int posixError, int sqliteIOErr) {
- assert( (sqliteIOErr == SQLITE_IOERR_LOCK) ||
- (sqliteIOErr == SQLITE_IOERR_UNLOCK) ||
- (sqliteIOErr == SQLITE_IOERR_RDLOCK) ||
- (sqliteIOErr == SQLITE_IOERR_CHECKRESERVEDLOCK) );
- switch (posixError) {
- case EACCES:
- case EAGAIN:
- case ETIMEDOUT:
- case EBUSY:
- case EINTR:
- case ENOLCK:
- /* random NFS retry error, unless during file system support
- * introspection, in which it actually means what it says */
- return SQLITE_BUSY;
-
- case EPERM:
- return SQLITE_PERM;
-
- default:
- return sqliteIOErr;
- }
-}
-
-
-/******************************************************************************
-****************** Begin Unique File ID Utility Used By VxWorks ***************
-**
-** On most versions of unix, we can get a unique ID for a file by concatenating
-** the device number and the inode number. But this does not work on VxWorks.
-** On VxWorks, a unique file id must be based on the canonical filename.
-**
-** A pointer to an instance of the following structure can be used as a
-** unique file ID in VxWorks. Each instance of this structure contains
-** a copy of the canonical filename. There is also a reference count.
-** The structure is reclaimed when the number of pointers to it drops to
-** zero.
-**
-** There are never very many files open at one time and lookups are not
-** a performance-critical path, so it is sufficient to put these
-** structures on a linked list.
-*/
-struct vxworksFileId {
- struct vxworksFileId *pNext; /* Next in a list of them all */
- int nRef; /* Number of references to this one */
- int nName; /* Length of the zCanonicalName[] string */
- char *zCanonicalName; /* Canonical filename */
-};
-
-#if OS_VXWORKS
-/*
-** All unique filenames are held on a linked list headed by this
-** variable:
-*/
-static struct vxworksFileId *vxworksFileList = 0;
-
-/*
-** Simplify a filename into its canonical form
-** by making the following changes:
-**
-** * removing any trailing and duplicate /
-** * convert /./ into just /
-** * convert /A/../ where A is any simple name into just /
-**
-** Changes are made in-place. Return the new name length.
-**
-** The original filename is in z[0..n-1]. Return the number of
-** characters in the simplified name.
-*/
-static int vxworksSimplifyName(char *z, int n){
- int i, j;
- while( n>1 && z[n-1]=='/' ){ n--; }
- for(i=j=0; i0 && z[j-1]!='/' ){ j--; }
- if( j>0 ){ j--; }
- i += 2;
- continue;
- }
- }
- z[j++] = z[i];
- }
- z[j] = 0;
- return j;
-}
-
-/*
-** Find a unique file ID for the given absolute pathname. Return
-** a pointer to the vxworksFileId object. This pointer is the unique
-** file ID.
-**
-** The nRef field of the vxworksFileId object is incremented before
-** the object is returned. A new vxworksFileId object is created
-** and added to the global list if necessary.
-**
-** If a memory allocation error occurs, return NULL.
-*/
-static struct vxworksFileId *vxworksFindFileId(const char *zAbsoluteName){
- struct vxworksFileId *pNew; /* search key and new file ID */
- struct vxworksFileId *pCandidate; /* For looping over existing file IDs */
- int n; /* Length of zAbsoluteName string */
-
- assert( zAbsoluteName[0]=='/' );
- n = (int)strlen(zAbsoluteName);
- pNew = sqlite3_malloc64( sizeof(*pNew) + (n+1) );
- if( pNew==0 ) return 0;
- pNew->zCanonicalName = (char*)&pNew[1];
- memcpy(pNew->zCanonicalName, zAbsoluteName, n+1);
- n = vxworksSimplifyName(pNew->zCanonicalName, n);
-
- /* Search for an existing entry that matching the canonical name.
- ** If found, increment the reference count and return a pointer to
- ** the existing file ID.
- */
- unixEnterMutex();
- for(pCandidate=vxworksFileList; pCandidate; pCandidate=pCandidate->pNext){
- if( pCandidate->nName==n
- && memcmp(pCandidate->zCanonicalName, pNew->zCanonicalName, n)==0
- ){
- sqlite3_free(pNew);
- pCandidate->nRef++;
- unixLeaveMutex();
- return pCandidate;
- }
- }
-
- /* No match was found. We will make a new file ID */
- pNew->nRef = 1;
- pNew->nName = n;
- pNew->pNext = vxworksFileList;
- vxworksFileList = pNew;
- unixLeaveMutex();
- return pNew;
-}
-
-/*
-** Decrement the reference count on a vxworksFileId object. Free
-** the object when the reference count reaches zero.
-*/
-static void vxworksReleaseFileId(struct vxworksFileId *pId){
- unixEnterMutex();
- assert( pId->nRef>0 );
- pId->nRef--;
- if( pId->nRef==0 ){
- struct vxworksFileId **pp;
- for(pp=&vxworksFileList; *pp && *pp!=pId; pp = &((*pp)->pNext)){}
- assert( *pp==pId );
- *pp = pId->pNext;
- sqlite3_free(pId);
- }
- unixLeaveMutex();
-}
-#endif /* OS_VXWORKS */
-/*************** End of Unique File ID Utility Used By VxWorks ****************
-******************************************************************************/
-
-
-/******************************************************************************
-*************************** Posix Advisory Locking ****************************
-**
-** POSIX advisory locks are broken by design. ANSI STD 1003.1 (1996)
-** section 6.5.2.2 lines 483 through 490 specify that when a process
-** sets or clears a lock, that operation overrides any prior locks set
-** by the same process. It does not explicitly say so, but this implies
-** that it overrides locks set by the same process using a different
-** file descriptor. Consider this test case:
-**
-** int fd1 = open("./file1", O_RDWR|O_CREAT, 0644);
-** int fd2 = open("./file2", O_RDWR|O_CREAT, 0644);
-**
-** Suppose ./file1 and ./file2 are really the same file (because
-** one is a hard or symbolic link to the other) then if you set
-** an exclusive lock on fd1, then try to get an exclusive lock
-** on fd2, it works. I would have expected the second lock to
-** fail since there was already a lock on the file due to fd1.
-** But not so. Since both locks came from the same process, the
-** second overrides the first, even though they were on different
-** file descriptors opened on different file names.
-**
-** This means that we cannot use POSIX locks to synchronize file access
-** among competing threads of the same process. POSIX locks will work fine
-** to synchronize access for threads in separate processes, but not
-** threads within the same process.
-**
-** To work around the problem, SQLite has to manage file locks internally
-** on its own. Whenever a new database is opened, we have to find the
-** specific inode of the database file (the inode is determined by the
-** st_dev and st_ino fields of the stat structure that fstat() fills in)
-** and check for locks already existing on that inode. When locks are
-** created or removed, we have to look at our own internal record of the
-** locks to see if another thread has previously set a lock on that same
-** inode.
-**
-** (Aside: The use of inode numbers as unique IDs does not work on VxWorks.
-** For VxWorks, we have to use the alternative unique ID system based on
-** canonical filename and implemented in the previous division.)
-**
-** The sqlite3_file structure for POSIX is no longer just an integer file
-** descriptor. It is now a structure that holds the integer file
-** descriptor and a pointer to a structure that describes the internal
-** locks on the corresponding inode. There is one locking structure
-** per inode, so if the same inode is opened twice, both unixFile structures
-** point to the same locking structure. The locking structure keeps
-** a reference count (so we will know when to delete it) and a "cnt"
-** field that tells us its internal lock status. cnt==0 means the
-** file is unlocked. cnt==-1 means the file has an exclusive lock.
-** cnt>0 means there are cnt shared locks on the file.
-**
-** Any attempt to lock or unlock a file first checks the locking
-** structure. The fcntl() system call is only invoked to set a
-** POSIX lock if the internal lock structure transitions between
-** a locked and an unlocked state.
-**
-** But wait: there are yet more problems with POSIX advisory locks.
-**
-** If you close a file descriptor that points to a file that has locks,
-** all locks on that file that are owned by the current process are
-** released. To work around this problem, each unixInodeInfo object
-** maintains a count of the number of pending locks on tha inode.
-** When an attempt is made to close an unixFile, if there are
-** other unixFile open on the same inode that are holding locks, the call
-** to close() the file descriptor is deferred until all of the locks clear.
-** The unixInodeInfo structure keeps a list of file descriptors that need to
-** be closed and that list is walked (and cleared) when the last lock
-** clears.
-**
-** Yet another problem: LinuxThreads do not play well with posix locks.
-**
-** Many older versions of linux use the LinuxThreads library which is
-** not posix compliant. Under LinuxThreads, a lock created by thread
-** A cannot be modified or overridden by a different thread B.
-** Only thread A can modify the lock. Locking behavior is correct
-** if the appliation uses the newer Native Posix Thread Library (NPTL)
-** on linux - with NPTL a lock created by thread A can override locks
-** in thread B. But there is no way to know at compile-time which
-** threading library is being used. So there is no way to know at
-** compile-time whether or not thread A can override locks on thread B.
-** One has to do a run-time check to discover the behavior of the
-** current process.
-**
-** SQLite used to support LinuxThreads. But support for LinuxThreads
-** was dropped beginning with version 3.7.0. SQLite will still work with
-** LinuxThreads provided that (1) there is no more than one connection
-** per database file in the same process and (2) database connections
-** do not move across threads.
-*/
-
-/*
-** An instance of the following structure serves as the key used
-** to locate a particular unixInodeInfo object.
-*/
-struct unixFileId {
- dev_t dev; /* Device number */
-#if OS_VXWORKS
- struct vxworksFileId *pId; /* Unique file ID for vxworks. */
-#else
- ino_t ino; /* Inode number */
-#endif
-};
-
-/*
-** An instance of the following structure is allocated for each open
-** inode. Or, on LinuxThreads, there is one of these structures for
-** each inode opened by each thread.
-**
-** A single inode can have multiple file descriptors, so each unixFile
-** structure contains a pointer to an instance of this object and this
-** object keeps a count of the number of unixFile pointing to it.
-*/
-struct unixInodeInfo {
- struct unixFileId fileId; /* The lookup key */
- int nShared; /* Number of SHARED locks held */
- unsigned char eFileLock; /* One of SHARED_LOCK, RESERVED_LOCK etc. */
- unsigned char bProcessLock; /* An exclusive process lock is held */
- int nRef; /* Number of pointers to this structure */
- unixShmNode *pShmNode; /* Shared memory associated with this inode */
- int nLock; /* Number of outstanding file locks */
- UnixUnusedFd *pUnused; /* Unused file descriptors to close */
- unixInodeInfo *pNext; /* List of all unixInodeInfo objects */
- unixInodeInfo *pPrev; /* .... doubly linked */
-#if SQLITE_ENABLE_LOCKING_STYLE
- unsigned long long sharedByte; /* for AFP simulated shared lock */
-#endif
-#if OS_VXWORKS
- sem_t *pSem; /* Named POSIX semaphore */
- char aSemName[MAX_PATHNAME+2]; /* Name of that semaphore */
-#endif
-};
-
-/*
-** A lists of all unixInodeInfo objects.
-*/
-static unixInodeInfo *inodeList = 0;
-
-/*
-**
-** This function - unixLogErrorAtLine(), is only ever called via the macro
-** unixLogError().
-**
-** It is invoked after an error occurs in an OS function and errno has been
-** set. It logs a message using sqlite3_log() containing the current value of
-** errno and, if possible, the human-readable equivalent from strerror() or
-** strerror_r().
-**
-** The first argument passed to the macro should be the error code that
-** will be returned to SQLite (e.g. SQLITE_IOERR_DELETE, SQLITE_CANTOPEN).
-** The two subsequent arguments should be the name of the OS function that
-** failed (e.g. "unlink", "open") and the associated file-system path,
-** if any.
-*/
-#define unixLogError(a,b,c) unixLogErrorAtLine(a,b,c,__LINE__)
-static int unixLogErrorAtLine(
- int errcode, /* SQLite error code */
- const char *zFunc, /* Name of OS function that failed */
- const char *zPath, /* File path associated with error */
- int iLine /* Source line number where error occurred */
-){
- char *zErr; /* Message from strerror() or equivalent */
- int iErrno = errno; /* Saved syscall error number */
-
- /* If this is not a threadsafe build (SQLITE_THREADSAFE==0), then use
- ** the strerror() function to obtain the human-readable error message
- ** equivalent to errno. Otherwise, use strerror_r().
- */
-#if SQLITE_THREADSAFE && defined(HAVE_STRERROR_R)
- char aErr[80];
- memset(aErr, 0, sizeof(aErr));
- zErr = aErr;
-
- /* If STRERROR_R_CHAR_P (set by autoconf scripts) or __USE_GNU is defined,
- ** assume that the system provides the GNU version of strerror_r() that
- ** returns a pointer to a buffer containing the error message. That pointer
- ** may point to aErr[], or it may point to some static storage somewhere.
- ** Otherwise, assume that the system provides the POSIX version of
- ** strerror_r(), which always writes an error message into aErr[].
- **
- ** If the code incorrectly assumes that it is the POSIX version that is
- ** available, the error message will often be an empty string. Not a
- ** huge problem. Incorrectly concluding that the GNU version is available
- ** could lead to a segfault though.
- */
-#if defined(STRERROR_R_CHAR_P) || defined(__USE_GNU)
- zErr =
-# endif
- strerror_r(iErrno, aErr, sizeof(aErr)-1);
-
-#elif SQLITE_THREADSAFE
- /* This is a threadsafe build, but strerror_r() is not available. */
- zErr = "";
-#else
- /* Non-threadsafe build, use strerror(). */
- zErr = strerror(iErrno);
-#endif
-
- if( zPath==0 ) zPath = "";
- sqlite3_log(errcode,
- "os_unix.c:%d: (%d) %s(%s) - %s",
- iLine, iErrno, zFunc, zPath, zErr
- );
-
- return errcode;
-}
-
-/*
-** Close a file descriptor.
-**
-** We assume that close() almost always works, since it is only in a
-** very sick application or on a very sick platform that it might fail.
-** If it does fail, simply leak the file descriptor, but do log the
-** error.
-**
-** Note that it is not safe to retry close() after EINTR since the
-** file descriptor might have already been reused by another thread.
-** So we don't even try to recover from an EINTR. Just log the error
-** and move on.
-*/
-static void robust_close(unixFile *pFile, int h, int lineno){
- if( osClose(h) ){
- unixLogErrorAtLine(SQLITE_IOERR_CLOSE, "close",
- pFile ? pFile->zPath : 0, lineno);
- }
-}
-
-/*
-** Set the pFile->lastErrno. Do this in a subroutine as that provides
-** a convenient place to set a breakpoint.
-*/
-static void storeLastErrno(unixFile *pFile, int error){
- pFile->lastErrno = error;
-}
-
-/*
-** Close all file descriptors accumuated in the unixInodeInfo->pUnused list.
-*/
-static void closePendingFds(unixFile *pFile){
- unixInodeInfo *pInode = pFile->pInode;
- UnixUnusedFd *p;
- UnixUnusedFd *pNext;
- for(p=pInode->pUnused; p; p=pNext){
- pNext = p->pNext;
- robust_close(pFile, p->fd, __LINE__);
- sqlite3_free(p);
- }
- pInode->pUnused = 0;
-}
-
-/*
-** Release a unixInodeInfo structure previously allocated by findInodeInfo().
-**
-** The mutex entered using the unixEnterMutex() function must be held
-** when this function is called.
-*/
-static void releaseInodeInfo(unixFile *pFile){
- unixInodeInfo *pInode = pFile->pInode;
- assert( unixMutexHeld() );
- if( ALWAYS(pInode) ){
- pInode->nRef--;
- if( pInode->nRef==0 ){
- assert( pInode->pShmNode==0 );
- closePendingFds(pFile);
- if( pInode->pPrev ){
- assert( pInode->pPrev->pNext==pInode );
- pInode->pPrev->pNext = pInode->pNext;
- }else{
- assert( inodeList==pInode );
- inodeList = pInode->pNext;
- }
- if( pInode->pNext ){
- assert( pInode->pNext->pPrev==pInode );
- pInode->pNext->pPrev = pInode->pPrev;
- }
- sqlite3_free(pInode);
- }
- }
-}
-
-/*
-** Given a file descriptor, locate the unixInodeInfo object that
-** describes that file descriptor. Create a new one if necessary. The
-** return value might be uninitialized if an error occurs.
-**
-** The mutex entered using the unixEnterMutex() function must be held
-** when this function is called.
-**
-** Return an appropriate error code.
-*/
-static int findInodeInfo(
- unixFile *pFile, /* Unix file with file desc used in the key */
- unixInodeInfo **ppInode /* Return the unixInodeInfo object here */
-){
- int rc; /* System call return code */
- int fd; /* The file descriptor for pFile */
- struct unixFileId fileId; /* Lookup key for the unixInodeInfo */
- struct stat statbuf; /* Low-level file information */
- unixInodeInfo *pInode = 0; /* Candidate unixInodeInfo object */
-
- assert( unixMutexHeld() );
-
- /* Get low-level information about the file that we can used to
- ** create a unique name for the file.
- */
- fd = pFile->h;
- rc = osFstat(fd, &statbuf);
- if( rc!=0 ){
- storeLastErrno(pFile, errno);
-#if defined(EOVERFLOW) && defined(SQLITE_DISABLE_LFS)
- if( pFile->lastErrno==EOVERFLOW ) return SQLITE_NOLFS;
-#endif
- return SQLITE_IOERR;
- }
-
-#ifdef __APPLE__
- /* On OS X on an msdos filesystem, the inode number is reported
- ** incorrectly for zero-size files. See ticket #3260. To work
- ** around this problem (we consider it a bug in OS X, not SQLite)
- ** we always increase the file size to 1 by writing a single byte
- ** prior to accessing the inode number. The one byte written is
- ** an ASCII 'S' character which also happens to be the first byte
- ** in the header of every SQLite database. In this way, if there
- ** is a race condition such that another thread has already populated
- ** the first page of the database, no damage is done.
- */
- if( statbuf.st_size==0 && (pFile->fsFlags & SQLITE_FSFLAGS_IS_MSDOS)!=0 ){
- do{ rc = osWrite(fd, "S", 1); }while( rc<0 && errno==EINTR );
- if( rc!=1 ){
- storeLastErrno(pFile, errno);
- return SQLITE_IOERR;
- }
- rc = osFstat(fd, &statbuf);
- if( rc!=0 ){
- storeLastErrno(pFile, errno);
- return SQLITE_IOERR;
- }
- }
-#endif
-
- memset(&fileId, 0, sizeof(fileId));
- fileId.dev = statbuf.st_dev;
-#if OS_VXWORKS
- fileId.pId = pFile->pId;
-#else
- fileId.ino = statbuf.st_ino;
-#endif
- pInode = inodeList;
- while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){
- pInode = pInode->pNext;
- }
- if( pInode==0 ){
- pInode = sqlite3_malloc64( sizeof(*pInode) );
- if( pInode==0 ){
- return SQLITE_NOMEM_BKPT;
- }
- memset(pInode, 0, sizeof(*pInode));
- memcpy(&pInode->fileId, &fileId, sizeof(fileId));
- pInode->nRef = 1;
- pInode->pNext = inodeList;
- pInode->pPrev = 0;
- if( inodeList ) inodeList->pPrev = pInode;
- inodeList = pInode;
- }else{
- pInode->nRef++;
- }
- *ppInode = pInode;
- return SQLITE_OK;
-}
-
-/*
-** Return TRUE if pFile has been renamed or unlinked since it was first opened.
-*/
-static int fileHasMoved(unixFile *pFile){
-#if OS_VXWORKS
- return pFile->pInode!=0 && pFile->pId!=pFile->pInode->fileId.pId;
-#else
- struct stat buf;
- return pFile->pInode!=0 &&
- (osStat(pFile->zPath, &buf)!=0 || buf.st_ino!=pFile->pInode->fileId.ino);
-#endif
-}
-
-
-/*
-** Check a unixFile that is a database. Verify the following:
-**
-** (1) There is exactly one hard link on the file
-** (2) The file is not a symbolic link
-** (3) The file has not been renamed or unlinked
-**
-** Issue sqlite3_log(SQLITE_WARNING,...) messages if anything is not right.
-*/
-static void verifyDbFile(unixFile *pFile){
- struct stat buf;
- int rc;
-
- /* These verifications occurs for the main database only */
- if( pFile->ctrlFlags & UNIXFILE_NOLOCK ) return;
-
- rc = osFstat(pFile->h, &buf);
- if( rc!=0 ){
- sqlite3_log(SQLITE_WARNING, "cannot fstat db file %s", pFile->zPath);
- return;
- }
- if( buf.st_nlink==0 ){
- sqlite3_log(SQLITE_WARNING, "file unlinked while open: %s", pFile->zPath);
- return;
- }
- if( buf.st_nlink>1 ){
- sqlite3_log(SQLITE_WARNING, "multiple links to file: %s", pFile->zPath);
- return;
- }
- if( fileHasMoved(pFile) ){
- sqlite3_log(SQLITE_WARNING, "file renamed while open: %s", pFile->zPath);
- return;
- }
-}
-
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero. The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-*/
-static int unixCheckReservedLock(sqlite3_file *id, int *pResOut){
- int rc = SQLITE_OK;
- int reserved = 0;
- unixFile *pFile = (unixFile*)id;
-
- SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
- assert( pFile );
- assert( pFile->eFileLock<=SHARED_LOCK );
- unixEnterMutex(); /* Because pFile->pInode is shared across threads */
-
- /* Check if a thread in this process holds such a lock */
- if( pFile->pInode->eFileLock>SHARED_LOCK ){
- reserved = 1;
- }
-
- /* Otherwise see if some other process holds it.
- */
-#ifndef __DJGPP__
- if( !reserved && !pFile->pInode->bProcessLock ){
- struct flock lock;
- lock.l_whence = SEEK_SET;
- lock.l_start = RESERVED_BYTE;
- lock.l_len = 1;
- lock.l_type = F_WRLCK;
- if( osFcntl(pFile->h, F_GETLK, &lock) ){
- rc = SQLITE_IOERR_CHECKRESERVEDLOCK;
- storeLastErrno(pFile, errno);
- } else if( lock.l_type!=F_UNLCK ){
- reserved = 1;
- }
- }
-#endif
-
- unixLeaveMutex();
- OSTRACE(("TEST WR-LOCK %d %d %d (unix)\n", pFile->h, rc, reserved));
-
- *pResOut = reserved;
- return rc;
-}
-
-/*
-** Attempt to set a system-lock on the file pFile. The lock is
-** described by pLock.
-**
-** If the pFile was opened read/write from unix-excl, then the only lock
-** ever obtained is an exclusive lock, and it is obtained exactly once
-** the first time any lock is attempted. All subsequent system locking
-** operations become no-ops. Locking operations still happen internally,
-** in order to coordinate access between separate database connections
-** within this process, but all of that is handled in memory and the
-** operating system does not participate.
-**
-** This function is a pass-through to fcntl(F_SETLK) if pFile is using
-** any VFS other than "unix-excl" or if pFile is opened on "unix-excl"
-** and is read-only.
-**
-** Zero is returned if the call completes successfully, or -1 if a call
-** to fcntl() fails. In this case, errno is set appropriately (by fcntl()).
-*/
-static int unixFileLock(unixFile *pFile, struct flock *pLock){
- int rc;
- unixInodeInfo *pInode = pFile->pInode;
- assert( unixMutexHeld() );
- assert( pInode!=0 );
- if( (pFile->ctrlFlags & (UNIXFILE_EXCL|UNIXFILE_RDONLY))==UNIXFILE_EXCL ){
- if( pInode->bProcessLock==0 ){
- struct flock lock;
- assert( pInode->nLock==0 );
- lock.l_whence = SEEK_SET;
- lock.l_start = SHARED_FIRST;
- lock.l_len = SHARED_SIZE;
- lock.l_type = F_WRLCK;
- rc = osFcntl(pFile->h, F_SETLK, &lock);
- if( rc<0 ) return rc;
- pInode->bProcessLock = 1;
- pInode->nLock++;
- }else{
- rc = 0;
- }
- }else{
- rc = osFcntl(pFile->h, F_SETLK, pLock);
- }
- return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-** (1) SHARED_LOCK
-** (2) RESERVED_LOCK
-** (3) PENDING_LOCK
-** (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between. The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal. The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-** UNLOCKED -> SHARED
-** SHARED -> RESERVED
-** SHARED -> (PENDING) -> EXCLUSIVE
-** RESERVED -> (PENDING) -> EXCLUSIVE
-** PENDING -> EXCLUSIVE
-**
-** This routine will only increase a lock. Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-*/
-static int unixLock(sqlite3_file *id, int eFileLock){
- /* The following describes the implementation of the various locks and
- ** lock transitions in terms of the POSIX advisory shared and exclusive
- ** lock primitives (called read-locks and write-locks below, to avoid
- ** confusion with SQLite lock names). The algorithms are complicated
- ** slightly in order to be compatible with Windows95 systems simultaneously
- ** accessing the same database file, in case that is ever required.
- **
- ** Symbols defined in os.h indentify the 'pending byte' and the 'reserved
- ** byte', each single bytes at well known offsets, and the 'shared byte
- ** range', a range of 510 bytes at a well known offset.
- **
- ** To obtain a SHARED lock, a read-lock is obtained on the 'pending
- ** byte'. If this is successful, 'shared byte range' is read-locked
- ** and the lock on the 'pending byte' released. (Legacy note: When
- ** SQLite was first developed, Windows95 systems were still very common,
- ** and Widnows95 lacks a shared-lock capability. So on Windows95, a
- ** single randomly selected by from the 'shared byte range' is locked.
- ** Windows95 is now pretty much extinct, but this work-around for the
- ** lack of shared-locks on Windows95 lives on, for backwards
- ** compatibility.)
- **
- ** A process may only obtain a RESERVED lock after it has a SHARED lock.
- ** A RESERVED lock is implemented by grabbing a write-lock on the
- ** 'reserved byte'.
- **
- ** A process may only obtain a PENDING lock after it has obtained a
- ** SHARED lock. A PENDING lock is implemented by obtaining a write-lock
- ** on the 'pending byte'. This ensures that no new SHARED locks can be
- ** obtained, but existing SHARED locks are allowed to persist. A process
- ** does not have to obtain a RESERVED lock on the way to a PENDING lock.
- ** This property is used by the algorithm for rolling back a journal file
- ** after a crash.
- **
- ** An EXCLUSIVE lock, obtained after a PENDING lock is held, is
- ** implemented by obtaining a write-lock on the entire 'shared byte
- ** range'. Since all other locks require a read-lock on one of the bytes
- ** within this range, this ensures that no other locks are held on the
- ** database.
- */
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile*)id;
- unixInodeInfo *pInode;
- struct flock lock;
- int tErrno = 0;
-
- assert( pFile );
- OSTRACE(("LOCK %d %s was %s(%s,%d) pid=%d (unix)\n", pFile->h,
- azFileLock(eFileLock), azFileLock(pFile->eFileLock),
- azFileLock(pFile->pInode->eFileLock), pFile->pInode->nShared,
- osGetpid(0)));
-
- /* If there is already a lock of this type or more restrictive on the
- ** unixFile, do nothing. Don't use the end_lock: exit path, as
- ** unixEnterMutex() hasn't been called yet.
- */
- if( pFile->eFileLock>=eFileLock ){
- OSTRACE(("LOCK %d %s ok (already held) (unix)\n", pFile->h,
- azFileLock(eFileLock)));
- return SQLITE_OK;
- }
-
- /* Make sure the locking sequence is correct.
- ** (1) We never move from unlocked to anything higher than shared lock.
- ** (2) SQLite never explicitly requests a pendig lock.
- ** (3) A shared lock is always held when a reserve lock is requested.
- */
- assert( pFile->eFileLock!=NO_LOCK || eFileLock==SHARED_LOCK );
- assert( eFileLock!=PENDING_LOCK );
- assert( eFileLock!=RESERVED_LOCK || pFile->eFileLock==SHARED_LOCK );
-
- /* This mutex is needed because pFile->pInode is shared across threads
- */
- unixEnterMutex();
- pInode = pFile->pInode;
-
- /* If some thread using this PID has a lock via a different unixFile*
- ** handle that precludes the requested lock, return BUSY.
- */
- if( (pFile->eFileLock!=pInode->eFileLock &&
- (pInode->eFileLock>=PENDING_LOCK || eFileLock>SHARED_LOCK))
- ){
- rc = SQLITE_BUSY;
- goto end_lock;
- }
-
- /* If a SHARED lock is requested, and some thread using this PID already
- ** has a SHARED or RESERVED lock, then increment reference counts and
- ** return SQLITE_OK.
- */
- if( eFileLock==SHARED_LOCK &&
- (pInode->eFileLock==SHARED_LOCK || pInode->eFileLock==RESERVED_LOCK) ){
- assert( eFileLock==SHARED_LOCK );
- assert( pFile->eFileLock==0 );
- assert( pInode->nShared>0 );
- pFile->eFileLock = SHARED_LOCK;
- pInode->nShared++;
- pInode->nLock++;
- goto end_lock;
- }
-
-
- /* A PENDING lock is needed before acquiring a SHARED lock and before
- ** acquiring an EXCLUSIVE lock. For the SHARED lock, the PENDING will
- ** be released.
- */
- lock.l_len = 1L;
- lock.l_whence = SEEK_SET;
- if( eFileLock==SHARED_LOCK
- || (eFileLock==EXCLUSIVE_LOCK && pFile->eFileLocknShared==0 );
- assert( pInode->eFileLock==0 );
- assert( rc==SQLITE_OK );
-
- /* Now get the read-lock */
- lock.l_start = SHARED_FIRST;
- lock.l_len = SHARED_SIZE;
- if( unixFileLock(pFile, &lock) ){
- tErrno = errno;
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- }
-
- /* Drop the temporary PENDING lock */
- lock.l_start = PENDING_BYTE;
- lock.l_len = 1L;
- lock.l_type = F_UNLCK;
- if( unixFileLock(pFile, &lock) && rc==SQLITE_OK ){
- /* This could happen with a network mount */
- tErrno = errno;
- rc = SQLITE_IOERR_UNLOCK;
- }
-
- if( rc ){
- if( rc!=SQLITE_BUSY ){
- storeLastErrno(pFile, tErrno);
- }
- goto end_lock;
- }else{
- pFile->eFileLock = SHARED_LOCK;
- pInode->nLock++;
- pInode->nShared = 1;
- }
- }else if( eFileLock==EXCLUSIVE_LOCK && pInode->nShared>1 ){
- /* We are trying for an exclusive lock but another thread in this
- ** same process is still holding a shared lock. */
- rc = SQLITE_BUSY;
- }else{
- /* The request was for a RESERVED or EXCLUSIVE lock. It is
- ** assumed that there is a SHARED or greater lock on the file
- ** already.
- */
- assert( 0!=pFile->eFileLock );
- lock.l_type = F_WRLCK;
-
- assert( eFileLock==RESERVED_LOCK || eFileLock==EXCLUSIVE_LOCK );
- if( eFileLock==RESERVED_LOCK ){
- lock.l_start = RESERVED_BYTE;
- lock.l_len = 1L;
- }else{
- lock.l_start = SHARED_FIRST;
- lock.l_len = SHARED_SIZE;
- }
-
- if( unixFileLock(pFile, &lock) ){
- tErrno = errno;
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- if( rc!=SQLITE_BUSY ){
- storeLastErrno(pFile, tErrno);
- }
- }
- }
-
-
-#ifdef SQLITE_DEBUG
- /* Set up the transaction-counter change checking flags when
- ** transitioning from a SHARED to a RESERVED lock. The change
- ** from SHARED to RESERVED marks the beginning of a normal
- ** write operation (not a hot journal rollback).
- */
- if( rc==SQLITE_OK
- && pFile->eFileLock<=SHARED_LOCK
- && eFileLock==RESERVED_LOCK
- ){
- pFile->transCntrChng = 0;
- pFile->dbUpdate = 0;
- pFile->inNormalWrite = 1;
- }
-#endif
-
-
- if( rc==SQLITE_OK ){
- pFile->eFileLock = eFileLock;
- pInode->eFileLock = eFileLock;
- }else if( eFileLock==EXCLUSIVE_LOCK ){
- pFile->eFileLock = PENDING_LOCK;
- pInode->eFileLock = PENDING_LOCK;
- }
-
-end_lock:
- unixLeaveMutex();
- OSTRACE(("LOCK %d %s %s (unix)\n", pFile->h, azFileLock(eFileLock),
- rc==SQLITE_OK ? "ok" : "failed"));
- return rc;
-}
-
-/*
-** Add the file descriptor used by file handle pFile to the corresponding
-** pUnused list.
-*/
-static void setPendingFd(unixFile *pFile){
- unixInodeInfo *pInode = pFile->pInode;
- UnixUnusedFd *p = pFile->pUnused;
- p->pNext = pInode->pUnused;
- pInode->pUnused = p;
- pFile->h = -1;
- pFile->pUnused = 0;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-**
-** If handleNFSUnlock is true, then on downgrading an EXCLUSIVE_LOCK to SHARED
-** the byte range is divided into 2 parts and the first part is unlocked then
-** set to a read lock, then the other part is simply unlocked. This works
-** around a bug in BSD NFS lockd (also seen on MacOSX 10.3+) that fails to
-** remove the write lock on a region when a read lock is set.
-*/
-static int posixUnlock(sqlite3_file *id, int eFileLock, int handleNFSUnlock){
- unixFile *pFile = (unixFile*)id;
- unixInodeInfo *pInode;
- struct flock lock;
- int rc = SQLITE_OK;
-
- assert( pFile );
- OSTRACE(("UNLOCK %d %d was %d(%d,%d) pid=%d (unix)\n", pFile->h, eFileLock,
- pFile->eFileLock, pFile->pInode->eFileLock, pFile->pInode->nShared,
- osGetpid(0)));
-
- assert( eFileLock<=SHARED_LOCK );
- if( pFile->eFileLock<=eFileLock ){
- return SQLITE_OK;
- }
- unixEnterMutex();
- pInode = pFile->pInode;
- assert( pInode->nShared!=0 );
- if( pFile->eFileLock>SHARED_LOCK ){
- assert( pInode->eFileLock==pFile->eFileLock );
-
-#ifdef SQLITE_DEBUG
- /* When reducing a lock such that other processes can start
- ** reading the database file again, make sure that the
- ** transaction counter was updated if any part of the database
- ** file changed. If the transaction counter is not updated,
- ** other connections to the same file might not realize that
- ** the file has changed and hence might not know to flush their
- ** cache. The use of a stale cache can lead to database corruption.
- */
- pFile->inNormalWrite = 0;
-#endif
-
- /* downgrading to a shared lock on NFS involves clearing the write lock
- ** before establishing the readlock - to avoid a race condition we downgrade
- ** the lock in 2 blocks, so that part of the range will be covered by a
- ** write lock until the rest is covered by a read lock:
- ** 1: [WWWWW]
- ** 2: [....W]
- ** 3: [RRRRW]
- ** 4: [RRRR.]
- */
- if( eFileLock==SHARED_LOCK ){
-#if !defined(__APPLE__) || !SQLITE_ENABLE_LOCKING_STYLE
- (void)handleNFSUnlock;
- assert( handleNFSUnlock==0 );
-#endif
-#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
- if( handleNFSUnlock ){
- int tErrno; /* Error code from system call errors */
- off_t divSize = SHARED_SIZE - 1;
-
- lock.l_type = F_UNLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = SHARED_FIRST;
- lock.l_len = divSize;
- if( unixFileLock(pFile, &lock)==(-1) ){
- tErrno = errno;
- rc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, tErrno);
- goto end_unlock;
- }
- lock.l_type = F_RDLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = SHARED_FIRST;
- lock.l_len = divSize;
- if( unixFileLock(pFile, &lock)==(-1) ){
- tErrno = errno;
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_RDLOCK);
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
- goto end_unlock;
- }
- lock.l_type = F_UNLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = SHARED_FIRST+divSize;
- lock.l_len = SHARED_SIZE-divSize;
- if( unixFileLock(pFile, &lock)==(-1) ){
- tErrno = errno;
- rc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, tErrno);
- goto end_unlock;
- }
- }else
-#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
- {
- lock.l_type = F_RDLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = SHARED_FIRST;
- lock.l_len = SHARED_SIZE;
- if( unixFileLock(pFile, &lock) ){
- /* In theory, the call to unixFileLock() cannot fail because another
- ** process is holding an incompatible lock. If it does, this
- ** indicates that the other process is not following the locking
- ** protocol. If this happens, return SQLITE_IOERR_RDLOCK. Returning
- ** SQLITE_BUSY would confuse the upper layer (in practice it causes
- ** an assert to fail). */
- rc = SQLITE_IOERR_RDLOCK;
- storeLastErrno(pFile, errno);
- goto end_unlock;
- }
- }
- }
- lock.l_type = F_UNLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = PENDING_BYTE;
- lock.l_len = 2L; assert( PENDING_BYTE+1==RESERVED_BYTE );
- if( unixFileLock(pFile, &lock)==0 ){
- pInode->eFileLock = SHARED_LOCK;
- }else{
- rc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, errno);
- goto end_unlock;
- }
- }
- if( eFileLock==NO_LOCK ){
- /* Decrement the shared lock counter. Release the lock using an
- ** OS call only when all threads in this same process have released
- ** the lock.
- */
- pInode->nShared--;
- if( pInode->nShared==0 ){
- lock.l_type = F_UNLCK;
- lock.l_whence = SEEK_SET;
- lock.l_start = lock.l_len = 0L;
- if( unixFileLock(pFile, &lock)==0 ){
- pInode->eFileLock = NO_LOCK;
- }else{
- rc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, errno);
- pInode->eFileLock = NO_LOCK;
- pFile->eFileLock = NO_LOCK;
- }
- }
-
- /* Decrement the count of locks against this same file. When the
- ** count reaches zero, close any other file descriptors whose close
- ** was deferred because of outstanding locks.
- */
- pInode->nLock--;
- assert( pInode->nLock>=0 );
- if( pInode->nLock==0 ){
- closePendingFds(pFile);
- }
- }
-
-end_unlock:
- unixLeaveMutex();
- if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
- return rc;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-*/
-static int unixUnlock(sqlite3_file *id, int eFileLock){
-#if SQLITE_MAX_MMAP_SIZE>0
- assert( eFileLock==SHARED_LOCK || ((unixFile *)id)->nFetchOut==0 );
-#endif
- return posixUnlock(id, eFileLock, 0);
-}
-
-#if SQLITE_MAX_MMAP_SIZE>0
-static int unixMapfile(unixFile *pFd, i64 nByte);
-static void unixUnmapfile(unixFile *pFd);
-#endif
-
-/*
-** This function performs the parts of the "close file" operation
-** common to all locking schemes. It closes the directory and file
-** handles, if they are valid, and sets all fields of the unixFile
-** structure to 0.
-**
-** It is *not* necessary to hold the mutex when this routine is called,
-** even on VxWorks. A mutex will be acquired on VxWorks by the
-** vxworksReleaseFileId() routine.
-*/
-static int closeUnixFile(sqlite3_file *id){
- unixFile *pFile = (unixFile*)id;
-#if SQLITE_MAX_MMAP_SIZE>0
- unixUnmapfile(pFile);
-#endif
- if( pFile->h>=0 ){
- robust_close(pFile, pFile->h, __LINE__);
- pFile->h = -1;
- }
-#if OS_VXWORKS
- if( pFile->pId ){
- if( pFile->ctrlFlags & UNIXFILE_DELETE ){
- osUnlink(pFile->pId->zCanonicalName);
- }
- vxworksReleaseFileId(pFile->pId);
- pFile->pId = 0;
- }
-#endif
-#ifdef SQLITE_UNLINK_AFTER_CLOSE
- if( pFile->ctrlFlags & UNIXFILE_DELETE ){
- osUnlink(pFile->zPath);
- sqlite3_free(*(char**)&pFile->zPath);
- pFile->zPath = 0;
- }
-#endif
- OSTRACE(("CLOSE %-3d\n", pFile->h));
- OpenCounter(-1);
- sqlite3_free(pFile->pUnused);
- memset(pFile, 0, sizeof(unixFile));
- return SQLITE_OK;
-}
-
-/*
-** Close a file.
-*/
-static int unixClose(sqlite3_file *id){
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile *)id;
- verifyDbFile(pFile);
- unixUnlock(id, NO_LOCK);
- unixEnterMutex();
-
- /* unixFile.pInode is always valid here. Otherwise, a different close
- ** routine (e.g. nolockClose()) would be called instead.
- */
- assert( pFile->pInode->nLock>0 || pFile->pInode->bProcessLock==0 );
- if( ALWAYS(pFile->pInode) && pFile->pInode->nLock ){
- /* If there are outstanding locks, do not actually close the file just
- ** yet because that would clear those locks. Instead, add the file
- ** descriptor to pInode->pUnused list. It will be automatically closed
- ** when the last lock is cleared.
- */
- setPendingFd(pFile);
- }
- releaseInodeInfo(pFile);
- rc = closeUnixFile(id);
- unixLeaveMutex();
- return rc;
-}
-
-/************** End of the posix advisory lock implementation *****************
-******************************************************************************/
-
-/******************************************************************************
-****************************** No-op Locking **********************************
-**
-** Of the various locking implementations available, this is by far the
-** simplest: locking is ignored. No attempt is made to lock the database
-** file for reading or writing.
-**
-** This locking mode is appropriate for use on read-only databases
-** (ex: databases that are burned into CD-ROM, for example.) It can
-** also be used if the application employs some external mechanism to
-** prevent simultaneous access of the same database by two or more
-** database connections. But there is a serious risk of database
-** corruption if this locking mode is used in situations where multiple
-** database connections are accessing the same database file at the same
-** time and one or more of those connections are writing.
-*/
-
-static int nolockCheckReservedLock(sqlite3_file *NotUsed, int *pResOut){
- UNUSED_PARAMETER(NotUsed);
- *pResOut = 0;
- return SQLITE_OK;
-}
-static int nolockLock(sqlite3_file *NotUsed, int NotUsed2){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
- return SQLITE_OK;
-}
-static int nolockUnlock(sqlite3_file *NotUsed, int NotUsed2){
- UNUSED_PARAMETER2(NotUsed, NotUsed2);
- return SQLITE_OK;
-}
-
-/*
-** Close the file.
-*/
-static int nolockClose(sqlite3_file *id) {
- return closeUnixFile(id);
-}
-
-/******************* End of the no-op lock implementation *********************
-******************************************************************************/
-
-/******************************************************************************
-************************* Begin dot-file Locking ******************************
-**
-** The dotfile locking implementation uses the existence of separate lock
-** files (really a directory) to control access to the database. This works
-** on just about every filesystem imaginable. But there are serious downsides:
-**
-** (1) There is zero concurrency. A single reader blocks all other
-** connections from reading or writing the database.
-**
-** (2) An application crash or power loss can leave stale lock files
-** sitting around that need to be cleared manually.
-**
-** Nevertheless, a dotlock is an appropriate locking mode for use if no
-** other locking strategy is available.
-**
-** Dotfile locking works by creating a subdirectory in the same directory as
-** the database and with the same name but with a ".lock" extension added.
-** The existence of a lock directory implies an EXCLUSIVE lock. All other
-** lock types (SHARED, RESERVED, PENDING) are mapped into EXCLUSIVE.
-*/
-
-/*
-** The file suffix added to the data base filename in order to create the
-** lock directory.
-*/
-#define DOTLOCK_SUFFIX ".lock"
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero. The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-**
-** In dotfile locking, either a lock exists or it does not. So in this
-** variation of CheckReservedLock(), *pResOut is set to true if any lock
-** is held on the file and false if the file is unlocked.
-*/
-static int dotlockCheckReservedLock(sqlite3_file *id, int *pResOut) {
- int rc = SQLITE_OK;
- int reserved = 0;
- unixFile *pFile = (unixFile*)id;
-
- SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
- assert( pFile );
- reserved = osAccess((const char*)pFile->lockingContext, 0)==0;
- OSTRACE(("TEST WR-LOCK %d %d %d (dotlock)\n", pFile->h, rc, reserved));
- *pResOut = reserved;
- return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-** (1) SHARED_LOCK
-** (2) RESERVED_LOCK
-** (3) PENDING_LOCK
-** (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between. The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal. The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-** UNLOCKED -> SHARED
-** SHARED -> RESERVED
-** SHARED -> (PENDING) -> EXCLUSIVE
-** RESERVED -> (PENDING) -> EXCLUSIVE
-** PENDING -> EXCLUSIVE
-**
-** This routine will only increase a lock. Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-**
-** With dotfile locking, we really only support state (4): EXCLUSIVE.
-** But we track the other locking levels internally.
-*/
-static int dotlockLock(sqlite3_file *id, int eFileLock) {
- unixFile *pFile = (unixFile*)id;
- char *zLockFile = (char *)pFile->lockingContext;
- int rc = SQLITE_OK;
-
-
- /* If we have any lock, then the lock file already exists. All we have
- ** to do is adjust our internal record of the lock level.
- */
- if( pFile->eFileLock > NO_LOCK ){
- pFile->eFileLock = eFileLock;
- /* Always update the timestamp on the old file */
-#ifdef HAVE_UTIME
- utime(zLockFile, NULL);
-#else
- utimes(zLockFile, NULL);
-#endif
- return SQLITE_OK;
- }
-
- /* grab an exclusive lock */
- rc = osMkdir(zLockFile, 0777);
- if( rc<0 ){
- /* failed to open/create the lock directory */
- int tErrno = errno;
- if( EEXIST == tErrno ){
- rc = SQLITE_BUSY;
- } else {
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- if( rc!=SQLITE_BUSY ){
- storeLastErrno(pFile, tErrno);
- }
- }
- return rc;
- }
-
- /* got it, set the type and return ok */
- pFile->eFileLock = eFileLock;
- return rc;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-**
-** When the locking level reaches NO_LOCK, delete the lock file.
-*/
-static int dotlockUnlock(sqlite3_file *id, int eFileLock) {
- unixFile *pFile = (unixFile*)id;
- char *zLockFile = (char *)pFile->lockingContext;
- int rc;
-
- assert( pFile );
- OSTRACE(("UNLOCK %d %d was %d pid=%d (dotlock)\n", pFile->h, eFileLock,
- pFile->eFileLock, osGetpid(0)));
- assert( eFileLock<=SHARED_LOCK );
-
- /* no-op if possible */
- if( pFile->eFileLock==eFileLock ){
- return SQLITE_OK;
- }
-
- /* To downgrade to shared, simply update our internal notion of the
- ** lock state. No need to mess with the file on disk.
- */
- if( eFileLock==SHARED_LOCK ){
- pFile->eFileLock = SHARED_LOCK;
- return SQLITE_OK;
- }
-
- /* To fully unlock the database, delete the lock file */
- assert( eFileLock==NO_LOCK );
- rc = osRmdir(zLockFile);
- if( rc<0 ){
- int tErrno = errno;
- if( tErrno==ENOENT ){
- rc = SQLITE_OK;
- }else{
- rc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, tErrno);
- }
- return rc;
- }
- pFile->eFileLock = NO_LOCK;
- return SQLITE_OK;
-}
-
-/*
-** Close a file. Make sure the lock has been released before closing.
-*/
-static int dotlockClose(sqlite3_file *id) {
- unixFile *pFile = (unixFile*)id;
- assert( id!=0 );
- dotlockUnlock(id, NO_LOCK);
- sqlite3_free(pFile->lockingContext);
- return closeUnixFile(id);
-}
-/****************** End of the dot-file lock implementation *******************
-******************************************************************************/
-
-/******************************************************************************
-************************** Begin flock Locking ********************************
-**
-** Use the flock() system call to do file locking.
-**
-** flock() locking is like dot-file locking in that the various
-** fine-grain locking levels supported by SQLite are collapsed into
-** a single exclusive lock. In other words, SHARED, RESERVED, and
-** PENDING locks are the same thing as an EXCLUSIVE lock. SQLite
-** still works when you do this, but concurrency is reduced since
-** only a single process can be reading the database at a time.
-**
-** Omit this section if SQLITE_ENABLE_LOCKING_STYLE is turned off
-*/
-#if SQLITE_ENABLE_LOCKING_STYLE
-
-/*
-** Retry flock() calls that fail with EINTR
-*/
-#ifdef EINTR
-static int robust_flock(int fd, int op){
- int rc;
- do{ rc = flock(fd,op); }while( rc<0 && errno==EINTR );
- return rc;
-}
-#else
-# define robust_flock(a,b) flock(a,b)
-#endif
-
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero. The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-*/
-static int flockCheckReservedLock(sqlite3_file *id, int *pResOut){
- int rc = SQLITE_OK;
- int reserved = 0;
- unixFile *pFile = (unixFile*)id;
-
- SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
- assert( pFile );
-
- /* Check if a thread in this process holds such a lock */
- if( pFile->eFileLock>SHARED_LOCK ){
- reserved = 1;
- }
-
- /* Otherwise see if some other process holds it. */
- if( !reserved ){
- /* attempt to get the lock */
- int lrc = robust_flock(pFile->h, LOCK_EX | LOCK_NB);
- if( !lrc ){
- /* got the lock, unlock it */
- lrc = robust_flock(pFile->h, LOCK_UN);
- if ( lrc ) {
- int tErrno = errno;
- /* unlock failed with an error */
- lrc = SQLITE_IOERR_UNLOCK;
- storeLastErrno(pFile, tErrno);
- rc = lrc;
- }
- } else {
- int tErrno = errno;
- reserved = 1;
- /* someone else might have it reserved */
- lrc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- if( IS_LOCK_ERROR(lrc) ){
- storeLastErrno(pFile, tErrno);
- rc = lrc;
- }
- }
- }
- OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved));
-
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
- rc = SQLITE_OK;
- reserved=1;
- }
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
- *pResOut = reserved;
- return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-** (1) SHARED_LOCK
-** (2) RESERVED_LOCK
-** (3) PENDING_LOCK
-** (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between. The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal. The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-** UNLOCKED -> SHARED
-** SHARED -> RESERVED
-** SHARED -> (PENDING) -> EXCLUSIVE
-** RESERVED -> (PENDING) -> EXCLUSIVE
-** PENDING -> EXCLUSIVE
-**
-** flock() only really support EXCLUSIVE locks. We track intermediate
-** lock states in the sqlite3_file structure, but all locks SHARED or
-** above are really EXCLUSIVE locks and exclude all other processes from
-** access the file.
-**
-** This routine will only increase a lock. Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-*/
-static int flockLock(sqlite3_file *id, int eFileLock) {
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile*)id;
-
- assert( pFile );
-
- /* if we already have a lock, it is exclusive.
- ** Just adjust level and punt on outta here. */
- if (pFile->eFileLock > NO_LOCK) {
- pFile->eFileLock = eFileLock;
- return SQLITE_OK;
- }
-
- /* grab an exclusive lock */
-
- if (robust_flock(pFile->h, LOCK_EX | LOCK_NB)) {
- int tErrno = errno;
- /* didn't get, must be busy */
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_LOCK);
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
- } else {
- /* got it, set the type and return ok */
- pFile->eFileLock = eFileLock;
- }
- OSTRACE(("LOCK %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock),
- rc==SQLITE_OK ? "ok" : "failed"));
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){
- rc = SQLITE_BUSY;
- }
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
- return rc;
-}
-
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-*/
-static int flockUnlock(sqlite3_file *id, int eFileLock) {
- unixFile *pFile = (unixFile*)id;
-
- assert( pFile );
- OSTRACE(("UNLOCK %d %d was %d pid=%d (flock)\n", pFile->h, eFileLock,
- pFile->eFileLock, osGetpid(0)));
- assert( eFileLock<=SHARED_LOCK );
-
- /* no-op if possible */
- if( pFile->eFileLock==eFileLock ){
- return SQLITE_OK;
- }
-
- /* shared can just be set because we always have an exclusive */
- if (eFileLock==SHARED_LOCK) {
- pFile->eFileLock = eFileLock;
- return SQLITE_OK;
- }
-
- /* no, really, unlock. */
- if( robust_flock(pFile->h, LOCK_UN) ){
-#ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS
- return SQLITE_OK;
-#endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */
- return SQLITE_IOERR_UNLOCK;
- }else{
- pFile->eFileLock = NO_LOCK;
- return SQLITE_OK;
- }
-}
-
-/*
-** Close a file.
-*/
-static int flockClose(sqlite3_file *id) {
- assert( id!=0 );
- flockUnlock(id, NO_LOCK);
- return closeUnixFile(id);
-}
-
-#endif /* SQLITE_ENABLE_LOCKING_STYLE && !OS_VXWORK */
-
-/******************* End of the flock lock implementation *********************
-******************************************************************************/
-
-/******************************************************************************
-************************ Begin Named Semaphore Locking ************************
-**
-** Named semaphore locking is only supported on VxWorks.
-**
-** Semaphore locking is like dot-lock and flock in that it really only
-** supports EXCLUSIVE locking. Only a single process can read or write
-** the database file at a time. This reduces potential concurrency, but
-** makes the lock implementation much easier.
-*/
-#if OS_VXWORKS
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero. The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-*/
-static int semXCheckReservedLock(sqlite3_file *id, int *pResOut) {
- int rc = SQLITE_OK;
- int reserved = 0;
- unixFile *pFile = (unixFile*)id;
-
- SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
- assert( pFile );
-
- /* Check if a thread in this process holds such a lock */
- if( pFile->eFileLock>SHARED_LOCK ){
- reserved = 1;
- }
-
- /* Otherwise see if some other process holds it. */
- if( !reserved ){
- sem_t *pSem = pFile->pInode->pSem;
-
- if( sem_trywait(pSem)==-1 ){
- int tErrno = errno;
- if( EAGAIN != tErrno ){
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_CHECKRESERVEDLOCK);
- storeLastErrno(pFile, tErrno);
- } else {
- /* someone else has the lock when we are in NO_LOCK */
- reserved = (pFile->eFileLock < SHARED_LOCK);
- }
- }else{
- /* we could have it if we want it */
- sem_post(pSem);
- }
- }
- OSTRACE(("TEST WR-LOCK %d %d %d (sem)\n", pFile->h, rc, reserved));
-
- *pResOut = reserved;
- return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-** (1) SHARED_LOCK
-** (2) RESERVED_LOCK
-** (3) PENDING_LOCK
-** (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between. The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal. The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-** UNLOCKED -> SHARED
-** SHARED -> RESERVED
-** SHARED -> (PENDING) -> EXCLUSIVE
-** RESERVED -> (PENDING) -> EXCLUSIVE
-** PENDING -> EXCLUSIVE
-**
-** Semaphore locks only really support EXCLUSIVE locks. We track intermediate
-** lock states in the sqlite3_file structure, but all locks SHARED or
-** above are really EXCLUSIVE locks and exclude all other processes from
-** access the file.
-**
-** This routine will only increase a lock. Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-*/
-static int semXLock(sqlite3_file *id, int eFileLock) {
- unixFile *pFile = (unixFile*)id;
- sem_t *pSem = pFile->pInode->pSem;
- int rc = SQLITE_OK;
-
- /* if we already have a lock, it is exclusive.
- ** Just adjust level and punt on outta here. */
- if (pFile->eFileLock > NO_LOCK) {
- pFile->eFileLock = eFileLock;
- rc = SQLITE_OK;
- goto sem_end_lock;
- }
-
- /* lock semaphore now but bail out when already locked. */
- if( sem_trywait(pSem)==-1 ){
- rc = SQLITE_BUSY;
- goto sem_end_lock;
- }
-
- /* got it, set the type and return ok */
- pFile->eFileLock = eFileLock;
-
- sem_end_lock:
- return rc;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-*/
-static int semXUnlock(sqlite3_file *id, int eFileLock) {
- unixFile *pFile = (unixFile*)id;
- sem_t *pSem = pFile->pInode->pSem;
-
- assert( pFile );
- assert( pSem );
- OSTRACE(("UNLOCK %d %d was %d pid=%d (sem)\n", pFile->h, eFileLock,
- pFile->eFileLock, osGetpid(0)));
- assert( eFileLock<=SHARED_LOCK );
-
- /* no-op if possible */
- if( pFile->eFileLock==eFileLock ){
- return SQLITE_OK;
- }
-
- /* shared can just be set because we always have an exclusive */
- if (eFileLock==SHARED_LOCK) {
- pFile->eFileLock = eFileLock;
- return SQLITE_OK;
- }
-
- /* no, really unlock. */
- if ( sem_post(pSem)==-1 ) {
- int rc, tErrno = errno;
- rc = sqliteErrorFromPosixError(tErrno, SQLITE_IOERR_UNLOCK);
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
- return rc;
- }
- pFile->eFileLock = NO_LOCK;
- return SQLITE_OK;
-}
-
-/*
- ** Close a file.
- */
-static int semXClose(sqlite3_file *id) {
- if( id ){
- unixFile *pFile = (unixFile*)id;
- semXUnlock(id, NO_LOCK);
- assert( pFile );
- unixEnterMutex();
- releaseInodeInfo(pFile);
- unixLeaveMutex();
- closeUnixFile(id);
- }
- return SQLITE_OK;
-}
-
-#endif /* OS_VXWORKS */
-/*
-** Named semaphore locking is only available on VxWorks.
-**
-*************** End of the named semaphore lock implementation ****************
-******************************************************************************/
-
-
-/******************************************************************************
-*************************** Begin AFP Locking *********************************
-**
-** AFP is the Apple Filing Protocol. AFP is a network filesystem found
-** on Apple Macintosh computers - both OS9 and OSX.
-**
-** Third-party implementations of AFP are available. But this code here
-** only works on OSX.
-*/
-
-#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
-/*
-** The afpLockingContext structure contains all afp lock specific state
-*/
-typedef struct afpLockingContext afpLockingContext;
-struct afpLockingContext {
- int reserved;
- const char *dbPath; /* Name of the open file */
-};
-
-struct ByteRangeLockPB2
-{
- unsigned long long offset; /* offset to first byte to lock */
- unsigned long long length; /* nbr of bytes to lock */
- unsigned long long retRangeStart; /* nbr of 1st byte locked if successful */
- unsigned char unLockFlag; /* 1 = unlock, 0 = lock */
- unsigned char startEndFlag; /* 1=rel to end of fork, 0=rel to start */
- int fd; /* file desc to assoc this lock with */
-};
-
-#define afpfsByteRangeLock2FSCTL _IOWR('z', 23, struct ByteRangeLockPB2)
-
-/*
-** This is a utility for setting or clearing a bit-range lock on an
-** AFP filesystem.
-**
-** Return SQLITE_OK on success, SQLITE_BUSY on failure.
-*/
-static int afpSetLock(
- const char *path, /* Name of the file to be locked or unlocked */
- unixFile *pFile, /* Open file descriptor on path */
- unsigned long long offset, /* First byte to be locked */
- unsigned long long length, /* Number of bytes to lock */
- int setLockFlag /* True to set lock. False to clear lock */
-){
- struct ByteRangeLockPB2 pb;
- int err;
-
- pb.unLockFlag = setLockFlag ? 0 : 1;
- pb.startEndFlag = 0;
- pb.offset = offset;
- pb.length = length;
- pb.fd = pFile->h;
-
- OSTRACE(("AFPSETLOCK [%s] for %d%s in range %llx:%llx\n",
- (setLockFlag?"ON":"OFF"), pFile->h, (pb.fd==-1?"[testval-1]":""),
- offset, length));
- err = fsctl(path, afpfsByteRangeLock2FSCTL, &pb, 0);
- if ( err==-1 ) {
- int rc;
- int tErrno = errno;
- OSTRACE(("AFPSETLOCK failed to fsctl() '%s' %d %s\n",
- path, tErrno, strerror(tErrno)));
-#ifdef SQLITE_IGNORE_AFP_LOCK_ERRORS
- rc = SQLITE_BUSY;
-#else
- rc = sqliteErrorFromPosixError(tErrno,
- setLockFlag ? SQLITE_IOERR_LOCK : SQLITE_IOERR_UNLOCK);
-#endif /* SQLITE_IGNORE_AFP_LOCK_ERRORS */
- if( IS_LOCK_ERROR(rc) ){
- storeLastErrno(pFile, tErrno);
- }
- return rc;
- } else {
- return SQLITE_OK;
- }
-}
-
-/*
-** This routine checks if there is a RESERVED lock held on the specified
-** file by this or any other process. If such a lock is held, set *pResOut
-** to a non-zero value otherwise *pResOut is set to zero. The return value
-** is set to SQLITE_OK unless an I/O error occurs during lock checking.
-*/
-static int afpCheckReservedLock(sqlite3_file *id, int *pResOut){
- int rc = SQLITE_OK;
- int reserved = 0;
- unixFile *pFile = (unixFile*)id;
- afpLockingContext *context;
-
- SimulateIOError( return SQLITE_IOERR_CHECKRESERVEDLOCK; );
-
- assert( pFile );
- context = (afpLockingContext *) pFile->lockingContext;
- if( context->reserved ){
- *pResOut = 1;
- return SQLITE_OK;
- }
- unixEnterMutex(); /* Because pFile->pInode is shared across threads */
-
- /* Check if a thread in this process holds such a lock */
- if( pFile->pInode->eFileLock>SHARED_LOCK ){
- reserved = 1;
- }
-
- /* Otherwise see if some other process holds it.
- */
- if( !reserved ){
- /* lock the RESERVED byte */
- int lrc = afpSetLock(context->dbPath, pFile, RESERVED_BYTE, 1,1);
- if( SQLITE_OK==lrc ){
- /* if we succeeded in taking the reserved lock, unlock it to restore
- ** the original state */
- lrc = afpSetLock(context->dbPath, pFile, RESERVED_BYTE, 1, 0);
- } else {
- /* if we failed to get the lock then someone else must have it */
- reserved = 1;
- }
- if( IS_LOCK_ERROR(lrc) ){
- rc=lrc;
- }
- }
-
- unixLeaveMutex();
- OSTRACE(("TEST WR-LOCK %d %d %d (afp)\n", pFile->h, rc, reserved));
-
- *pResOut = reserved;
- return rc;
-}
-
-/*
-** Lock the file with the lock specified by parameter eFileLock - one
-** of the following:
-**
-** (1) SHARED_LOCK
-** (2) RESERVED_LOCK
-** (3) PENDING_LOCK
-** (4) EXCLUSIVE_LOCK
-**
-** Sometimes when requesting one lock state, additional lock states
-** are inserted in between. The locking might fail on one of the later
-** transitions leaving the lock state different from what it started but
-** still short of its goal. The following chart shows the allowed
-** transitions and the inserted intermediate states:
-**
-** UNLOCKED -> SHARED
-** SHARED -> RESERVED
-** SHARED -> (PENDING) -> EXCLUSIVE
-** RESERVED -> (PENDING) -> EXCLUSIVE
-** PENDING -> EXCLUSIVE
-**
-** This routine will only increase a lock. Use the sqlite3OsUnlock()
-** routine to lower a locking level.
-*/
-static int afpLock(sqlite3_file *id, int eFileLock){
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile*)id;
- unixInodeInfo *pInode = pFile->pInode;
- afpLockingContext *context = (afpLockingContext *) pFile->lockingContext;
-
- assert( pFile );
- OSTRACE(("LOCK %d %s was %s(%s,%d) pid=%d (afp)\n", pFile->h,
- azFileLock(eFileLock), azFileLock(pFile->eFileLock),
- azFileLock(pInode->eFileLock), pInode->nShared , osGetpid(0)));
-
- /* If there is already a lock of this type or more restrictive on the
- ** unixFile, do nothing. Don't use the afp_end_lock: exit path, as
- ** unixEnterMutex() hasn't been called yet.
- */
- if( pFile->eFileLock>=eFileLock ){
- OSTRACE(("LOCK %d %s ok (already held) (afp)\n", pFile->h,
- azFileLock(eFileLock)));
- return SQLITE_OK;
- }
-
- /* Make sure the locking sequence is correct
- ** (1) We never move from unlocked to anything higher than shared lock.
- ** (2) SQLite never explicitly requests a pendig lock.
- ** (3) A shared lock is always held when a reserve lock is requested.
- */
- assert( pFile->eFileLock!=NO_LOCK || eFileLock==SHARED_LOCK );
- assert( eFileLock!=PENDING_LOCK );
- assert( eFileLock!=RESERVED_LOCK || pFile->eFileLock==SHARED_LOCK );
-
- /* This mutex is needed because pFile->pInode is shared across threads
- */
- unixEnterMutex();
- pInode = pFile->pInode;
-
- /* If some thread using this PID has a lock via a different unixFile*
- ** handle that precludes the requested lock, return BUSY.
- */
- if( (pFile->eFileLock!=pInode->eFileLock &&
- (pInode->eFileLock>=PENDING_LOCK || eFileLock>SHARED_LOCK))
- ){
- rc = SQLITE_BUSY;
- goto afp_end_lock;
- }
-
- /* If a SHARED lock is requested, and some thread using this PID already
- ** has a SHARED or RESERVED lock, then increment reference counts and
- ** return SQLITE_OK.
- */
- if( eFileLock==SHARED_LOCK &&
- (pInode->eFileLock==SHARED_LOCK || pInode->eFileLock==RESERVED_LOCK) ){
- assert( eFileLock==SHARED_LOCK );
- assert( pFile->eFileLock==0 );
- assert( pInode->nShared>0 );
- pFile->eFileLock = SHARED_LOCK;
- pInode->nShared++;
- pInode->nLock++;
- goto afp_end_lock;
- }
-
- /* A PENDING lock is needed before acquiring a SHARED lock and before
- ** acquiring an EXCLUSIVE lock. For the SHARED lock, the PENDING will
- ** be released.
- */
- if( eFileLock==SHARED_LOCK
- || (eFileLock==EXCLUSIVE_LOCK && pFile->eFileLockdbPath, pFile, PENDING_BYTE, 1, 1);
- if (failed) {
- rc = failed;
- goto afp_end_lock;
- }
- }
-
- /* If control gets to this point, then actually go ahead and make
- ** operating system calls for the specified lock.
- */
- if( eFileLock==SHARED_LOCK ){
- int lrc1, lrc2, lrc1Errno = 0;
- long lk, mask;
-
- assert( pInode->nShared==0 );
- assert( pInode->eFileLock==0 );
-
- mask = (sizeof(long)==8) ? LARGEST_INT64 : 0x7fffffff;
- /* Now get the read-lock SHARED_LOCK */
- /* note that the quality of the randomness doesn't matter that much */
- lk = random();
- pInode->sharedByte = (lk & mask)%(SHARED_SIZE - 1);
- lrc1 = afpSetLock(context->dbPath, pFile,
- SHARED_FIRST+pInode->sharedByte, 1, 1);
- if( IS_LOCK_ERROR(lrc1) ){
- lrc1Errno = pFile->lastErrno;
- }
- /* Drop the temporary PENDING lock */
- lrc2 = afpSetLock(context->dbPath, pFile, PENDING_BYTE, 1, 0);
-
- if( IS_LOCK_ERROR(lrc1) ) {
- storeLastErrno(pFile, lrc1Errno);
- rc = lrc1;
- goto afp_end_lock;
- } else if( IS_LOCK_ERROR(lrc2) ){
- rc = lrc2;
- goto afp_end_lock;
- } else if( lrc1 != SQLITE_OK ) {
- rc = lrc1;
- } else {
- pFile->eFileLock = SHARED_LOCK;
- pInode->nLock++;
- pInode->nShared = 1;
- }
- }else if( eFileLock==EXCLUSIVE_LOCK && pInode->nShared>1 ){
- /* We are trying for an exclusive lock but another thread in this
- ** same process is still holding a shared lock. */
- rc = SQLITE_BUSY;
- }else{
- /* The request was for a RESERVED or EXCLUSIVE lock. It is
- ** assumed that there is a SHARED or greater lock on the file
- ** already.
- */
- int failed = 0;
- assert( 0!=pFile->eFileLock );
- if (eFileLock >= RESERVED_LOCK && pFile->eFileLock < RESERVED_LOCK) {
- /* Acquire a RESERVED lock */
- failed = afpSetLock(context->dbPath, pFile, RESERVED_BYTE, 1,1);
- if( !failed ){
- context->reserved = 1;
- }
- }
- if (!failed && eFileLock == EXCLUSIVE_LOCK) {
- /* Acquire an EXCLUSIVE lock */
-
- /* Remove the shared lock before trying the range. we'll need to
- ** reestablish the shared lock if we can't get the afpUnlock
- */
- if( !(failed = afpSetLock(context->dbPath, pFile, SHARED_FIRST +
- pInode->sharedByte, 1, 0)) ){
- int failed2 = SQLITE_OK;
- /* now attemmpt to get the exclusive lock range */
- failed = afpSetLock(context->dbPath, pFile, SHARED_FIRST,
- SHARED_SIZE, 1);
- if( failed && (failed2 = afpSetLock(context->dbPath, pFile,
- SHARED_FIRST + pInode->sharedByte, 1, 1)) ){
- /* Can't reestablish the shared lock. Sqlite can't deal, this is
- ** a critical I/O error
- */
- rc = ((failed & SQLITE_IOERR) == SQLITE_IOERR) ? failed2 :
- SQLITE_IOERR_LOCK;
- goto afp_end_lock;
- }
- }else{
- rc = failed;
- }
- }
- if( failed ){
- rc = failed;
- }
- }
-
- if( rc==SQLITE_OK ){
- pFile->eFileLock = eFileLock;
- pInode->eFileLock = eFileLock;
- }else if( eFileLock==EXCLUSIVE_LOCK ){
- pFile->eFileLock = PENDING_LOCK;
- pInode->eFileLock = PENDING_LOCK;
- }
-
-afp_end_lock:
- unixLeaveMutex();
- OSTRACE(("LOCK %d %s %s (afp)\n", pFile->h, azFileLock(eFileLock),
- rc==SQLITE_OK ? "ok" : "failed"));
- return rc;
-}
-
-/*
-** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
-** must be either NO_LOCK or SHARED_LOCK.
-**
-** If the locking level of the file descriptor is already at or below
-** the requested locking level, this routine is a no-op.
-*/
-static int afpUnlock(sqlite3_file *id, int eFileLock) {
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile*)id;
- unixInodeInfo *pInode;
- afpLockingContext *context = (afpLockingContext *) pFile->lockingContext;
- int skipShared = 0;
-#ifdef SQLITE_TEST
- int h = pFile->h;
-#endif
-
- assert( pFile );
- OSTRACE(("UNLOCK %d %d was %d(%d,%d) pid=%d (afp)\n", pFile->h, eFileLock,
- pFile->eFileLock, pFile->pInode->eFileLock, pFile->pInode->nShared,
- osGetpid(0)));
-
- assert( eFileLock<=SHARED_LOCK );
- if( pFile->eFileLock<=eFileLock ){
- return SQLITE_OK;
- }
- unixEnterMutex();
- pInode = pFile->pInode;
- assert( pInode->nShared!=0 );
- if( pFile->eFileLock>SHARED_LOCK ){
- assert( pInode->eFileLock==pFile->eFileLock );
- SimulateIOErrorBenign(1);
- SimulateIOError( h=(-1) )
- SimulateIOErrorBenign(0);
-
-#ifdef SQLITE_DEBUG
- /* When reducing a lock such that other processes can start
- ** reading the database file again, make sure that the
- ** transaction counter was updated if any part of the database
- ** file changed. If the transaction counter is not updated,
- ** other connections to the same file might not realize that
- ** the file has changed and hence might not know to flush their
- ** cache. The use of a stale cache can lead to database corruption.
- */
- assert( pFile->inNormalWrite==0
- || pFile->dbUpdate==0
- || pFile->transCntrChng==1 );
- pFile->inNormalWrite = 0;
-#endif
-
- if( pFile->eFileLock==EXCLUSIVE_LOCK ){
- rc = afpSetLock(context->dbPath, pFile, SHARED_FIRST, SHARED_SIZE, 0);
- if( rc==SQLITE_OK && (eFileLock==SHARED_LOCK || pInode->nShared>1) ){
- /* only re-establish the shared lock if necessary */
- int sharedLockByte = SHARED_FIRST+pInode->sharedByte;
- rc = afpSetLock(context->dbPath, pFile, sharedLockByte, 1, 1);
- } else {
- skipShared = 1;
- }
- }
- if( rc==SQLITE_OK && pFile->eFileLock>=PENDING_LOCK ){
- rc = afpSetLock(context->dbPath, pFile, PENDING_BYTE, 1, 0);
- }
- if( rc==SQLITE_OK && pFile->eFileLock>=RESERVED_LOCK && context->reserved ){
- rc = afpSetLock(context->dbPath, pFile, RESERVED_BYTE, 1, 0);
- if( !rc ){
- context->reserved = 0;
- }
- }
- if( rc==SQLITE_OK && (eFileLock==SHARED_LOCK || pInode->nShared>1)){
- pInode->eFileLock = SHARED_LOCK;
- }
- }
- if( rc==SQLITE_OK && eFileLock==NO_LOCK ){
-
- /* Decrement the shared lock counter. Release the lock using an
- ** OS call only when all threads in this same process have released
- ** the lock.
- */
- unsigned long long sharedLockByte = SHARED_FIRST+pInode->sharedByte;
- pInode->nShared--;
- if( pInode->nShared==0 ){
- SimulateIOErrorBenign(1);
- SimulateIOError( h=(-1) )
- SimulateIOErrorBenign(0);
- if( !skipShared ){
- rc = afpSetLock(context->dbPath, pFile, sharedLockByte, 1, 0);
- }
- if( !rc ){
- pInode->eFileLock = NO_LOCK;
- pFile->eFileLock = NO_LOCK;
- }
- }
- if( rc==SQLITE_OK ){
- pInode->nLock--;
- assert( pInode->nLock>=0 );
- if( pInode->nLock==0 ){
- closePendingFds(pFile);
- }
- }
- }
-
- unixLeaveMutex();
- if( rc==SQLITE_OK ) pFile->eFileLock = eFileLock;
- return rc;
-}
-
-/*
-** Close a file & cleanup AFP specific locking context
-*/
-static int afpClose(sqlite3_file *id) {
- int rc = SQLITE_OK;
- unixFile *pFile = (unixFile*)id;
- assert( id!=0 );
- afpUnlock(id, NO_LOCK);
- unixEnterMutex();
- if( pFile->pInode && pFile->pInode->nLock ){
- /* If there are outstanding locks, do not actually close the file just
- ** yet because that would clear those locks. Instead, add the file
- ** descriptor to pInode->aPending. It will be automatically closed when
- ** the last lock is cleared.
- */
- setPendingFd(pFile);
- }
- releaseInodeInfo(pFile);
- sqlite3_free(pFile->lockingContext);
- rc = closeUnixFile(id);
- unixLeaveMutex();
- return rc;
-}
-
-#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
-/*
-** The code above is the AFP lock implementation. The code is specific
-** to MacOSX and does not work on other unix platforms. No alternative
-** is available. If you don't compile for a mac, then the "unix-afp"
-** VFS is not available.
-**
-********************* End of the AFP lock implementation **********************
-******************************************************************************/
-
-/******************************************************************************
-*************************** Begin NFS Locking ********************************/
-
-#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE
-/*
- ** Lower the locking level on file descriptor pFile to eFileLock. eFileLock
- ** must be either NO_LOCK or SHARED_LOCK.
- **
- ** If the locking level of the file descriptor is already at or below
- ** the requested locking level, this routine is a no-op.
- */
-static int nfsUnlock(sqlite3_file *id, int eFileLock){
- return posixUnlock(id, eFileLock, 1);
-}
-
-#endif /* defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE */
-/*
-** The code above is the NFS lock implementation. The code is specific
-** to MacOSX and does not work on other unix platforms. No alternative
-** is available.
-**
-********************* End of the NFS lock implementation **********************
-******************************************************************************/
-
-/******************************************************************************
-**************** Non-locking sqlite3_file methods *****************************
-**
-** The next division contains implementations for all methods of the
-** sqlite3_file object other than the locking methods. The locking
-** methods were defined in divisions above (one locking method per
-** division). Those methods that are common to all locking modes
-** are gather together into this division.
-*/
-
-/*
-** Seek to the offset passed as the second argument, then read cnt
-** bytes into pBuf. Return the number of bytes actually read.
-**
-** NB: If you define USE_PREAD or USE_PREAD64, then it might also
-** be necessary to define _XOPEN_SOURCE to be 500. This varies from
-** one system to another. Since SQLite does not define USE_PREAD
-** in any form by default, we will not attempt to define _XOPEN_SOURCE.
-** See tickets #2741 and #2681.
-**
-** To avoid stomping the errno value on a failed read the lastErrno value
-** is set before returning.
-*/
-static int seekAndRead(unixFile *id, sqlite3_int64 offset, void *pBuf, int cnt){
- int got;
- int prior = 0;
-#if (!defined(USE_PREAD) && !defined(USE_PREAD64))
- i64 newOffset;
-#endif
- TIMER_START;
- assert( cnt==(cnt&0x1ffff) );
- assert( id->h>2 );
- do{
-#if defined(USE_PREAD)
- got = osPread(id->h, pBuf, cnt, offset);
- SimulateIOError( got = -1 );
-#elif defined(USE_PREAD64)
- got = osPread64(id->h, pBuf, cnt, offset);
- SimulateIOError( got = -1 );
-#else
- newOffset = lseek(id->h, offset, SEEK_SET);
- SimulateIOError( newOffset = -1 );
- if( newOffset<0 ){
- storeLastErrno((unixFile*)id, errno);
- return -1;
- }
- got = osRead(id->h, pBuf, cnt);
-#endif
- if( got==cnt ) break;
- if( got<0 ){
- if( errno==EINTR ){ got = 1; continue; }
- prior = 0;
- storeLastErrno((unixFile*)id, errno);
- break;
- }else if( got>0 ){
- cnt -= got;
- offset += got;
- prior += got;
- pBuf = (void*)(got + (char*)pBuf);
- }
- }while( got>0 );
- TIMER_END;
- OSTRACE(("READ %-3d %5d %7lld %llu\n",
- id->h, got+prior, offset-prior, TIMER_ELAPSED));
- return got+prior;
-}
-
-/*
-** Read data from a file into a buffer. Return SQLITE_OK if all
-** bytes were read successfully and SQLITE_IOERR if anything goes
-** wrong.
-*/
-static int unixRead(
- sqlite3_file *id,
- void *pBuf,
- int amt,
- sqlite3_int64 offset
-){
- unixFile *pFile = (unixFile *)id;
- int got;
- assert( id );
- assert( offset>=0 );
- assert( amt>0 );
-
- /* If this is a database file (not a journal, master-journal or temp
- ** file), the bytes in the locking range should never be read or written. */
-#if 0
- assert( pFile->pUnused==0
- || offset>=PENDING_BYTE+512
- || offset+amt<=PENDING_BYTE
- );
-#endif
-
-#if SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this read request as possible by transfering
- ** data from the memory mapping using memcpy(). */
- if( offsetmmapSize ){
- if( offset+amt <= pFile->mmapSize ){
- memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], amt);
- return SQLITE_OK;
- }else{
- int nCopy = pFile->mmapSize - offset;
- memcpy(pBuf, &((u8 *)(pFile->pMapRegion))[offset], nCopy);
- pBuf = &((u8 *)pBuf)[nCopy];
- amt -= nCopy;
- offset += nCopy;
- }
- }
-#endif
-
- got = seekAndRead(pFile, offset, pBuf, amt);
- if( got==amt ){
- return SQLITE_OK;
- }else if( got<0 ){
- /* lastErrno set by seekAndRead */
- return SQLITE_IOERR_READ;
- }else{
- storeLastErrno(pFile, 0); /* not a system error */
- /* Unread parts of the buffer must be zero-filled */
- memset(&((char*)pBuf)[got], 0, amt-got);
- return SQLITE_IOERR_SHORT_READ;
- }
-}
-
-/*
-** Attempt to seek the file-descriptor passed as the first argument to
-** absolute offset iOff, then attempt to write nBuf bytes of data from
-** pBuf to it. If an error occurs, return -1 and set *piErrno. Otherwise,
-** return the actual number of bytes written (which may be less than
-** nBuf).
-*/
-static int seekAndWriteFd(
- int fd, /* File descriptor to write to */
- i64 iOff, /* File offset to begin writing at */
- const void *pBuf, /* Copy data from this buffer to the file */
- int nBuf, /* Size of buffer pBuf in bytes */
- int *piErrno /* OUT: Error number if error occurs */
-){
- int rc = 0; /* Value returned by system call */
-
- assert( nBuf==(nBuf&0x1ffff) );
- assert( fd>2 );
- assert( piErrno!=0 );
- nBuf &= 0x1ffff;
- TIMER_START;
-
-#if defined(USE_PREAD)
- do{ rc = (int)osPwrite(fd, pBuf, nBuf, iOff); }while( rc<0 && errno==EINTR );
-#elif defined(USE_PREAD64)
- do{ rc = (int)osPwrite64(fd, pBuf, nBuf, iOff);}while( rc<0 && errno==EINTR);
-#else
- do{
- i64 iSeek = lseek(fd, iOff, SEEK_SET);
- SimulateIOError( iSeek = -1 );
- if( iSeek<0 ){
- rc = -1;
- break;
- }
- rc = osWrite(fd, pBuf, nBuf);
- }while( rc<0 && errno==EINTR );
-#endif
-
- TIMER_END;
- OSTRACE(("WRITE %-3d %5d %7lld %llu\n", fd, rc, iOff, TIMER_ELAPSED));
-
- if( rc<0 ) *piErrno = errno;
- return rc;
-}
-
-
-/*
-** Seek to the offset in id->offset then read cnt bytes into pBuf.
-** Return the number of bytes actually read. Update the offset.
-**
-** To avoid stomping the errno value on a failed write the lastErrno value
-** is set before returning.
-*/
-static int seekAndWrite(unixFile *id, i64 offset, const void *pBuf, int cnt){
- return seekAndWriteFd(id->h, offset, pBuf, cnt, &id->lastErrno);
-}
-
-
-/*
-** Write data from a buffer into a file. Return SQLITE_OK on success
-** or some other error code on failure.
-*/
-static int unixWrite(
- sqlite3_file *id,
- const void *pBuf,
- int amt,
- sqlite3_int64 offset
-){
- unixFile *pFile = (unixFile*)id;
- int wrote = 0;
- assert( id );
- assert( amt>0 );
-
- /* If this is a database file (not a journal, master-journal or temp
- ** file), the bytes in the locking range should never be read or written. */
-#if 0
- assert( pFile->pUnused==0
- || offset>=PENDING_BYTE+512
- || offset+amt<=PENDING_BYTE
- );
-#endif
-
-#ifdef SQLITE_DEBUG
- /* If we are doing a normal write to a database file (as opposed to
- ** doing a hot-journal rollback or a write to some file other than a
- ** normal database file) then record the fact that the database
- ** has changed. If the transaction counter is modified, record that
- ** fact too.
- */
- if( pFile->inNormalWrite ){
- pFile->dbUpdate = 1; /* The database has been modified */
- if( offset<=24 && offset+amt>=27 ){
- int rc;
- char oldCntr[4];
- SimulateIOErrorBenign(1);
- rc = seekAndRead(pFile, 24, oldCntr, 4);
- SimulateIOErrorBenign(0);
- if( rc!=4 || memcmp(oldCntr, &((char*)pBuf)[24-offset], 4)!=0 ){
- pFile->transCntrChng = 1; /* The transaction counter has changed */
- }
- }
- }
-#endif
-
-#if defined(SQLITE_MMAP_READWRITE) && SQLITE_MAX_MMAP_SIZE>0
- /* Deal with as much of this write request as possible by transfering
- ** data from the memory mapping using memcpy(). */
- if( offsetmmapSize ){
- if( offset+amt <= pFile->mmapSize ){
- memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, amt);
- return SQLITE_OK;
- }else{
- int nCopy = pFile->mmapSize - offset;
- memcpy(&((u8 *)(pFile->pMapRegion))[offset], pBuf, nCopy);
- pBuf = &((u8 *)pBuf)[nCopy];
- amt -= nCopy;
- offset += nCopy;
- }
- }
-#endif
-
- while( (wrote = seekAndWrite(pFile, offset, pBuf, amt))0 ){
- amt -= wrote;
- offset += wrote;
- pBuf = &((char*)pBuf)[wrote];
- }
- SimulateIOError(( wrote=(-1), amt=1 ));
- SimulateDiskfullError(( wrote=0, amt=1 ));
-
- if( amt>wrote ){
- if( wrote<0 && pFile->lastErrno!=ENOSPC ){
- /* lastErrno set by seekAndWrite */
- return SQLITE_IOERR_WRITE;
- }else{
- storeLastErrno(pFile, 0); /* not a system error */
- return SQLITE_FULL;
- }
- }
-
- return SQLITE_OK;
-}
-
-#ifdef SQLITE_TEST
-/*
-** Count the number of fullsyncs and normal syncs. This is used to test
-** that syncs and fullsyncs are occurring at the right times.
-*/
-SQLITE_API int sqlite3_sync_count = 0;
-SQLITE_API int sqlite3_fullsync_count = 0;
-#endif
-
-/*
-** We do not trust systems to provide a working fdatasync(). Some do.
-** Others do no. To be safe, we will stick with the (slightly slower)
-** fsync(). If you know that your system does support fdatasync() correctly,
-** then simply compile with -Dfdatasync=fdatasync or -DHAVE_FDATASYNC
-*/
-#if !defined(fdatasync) && !HAVE_FDATASYNC
-# define fdatasync fsync
-#endif
-
-/*
-** Define HAVE_FULLFSYNC to 0 or 1 depending on whether or not
-** the F_FULLFSYNC macro is defined. F_FULLFSYNC is currently
-** only available on Mac OS X. But that could change.
-*/
-#ifdef F_FULLFSYNC
-# define HAVE_FULLFSYNC 1
-#else
-# define HAVE_FULLFSYNC 0
-#endif
-
-
-/*
-** The fsync() system call does not work as advertised on many
-** unix systems. The following procedure is an attempt to make
-** it work better.
-**
-** The SQLITE_NO_SYNC macro disables all fsync()s. This is useful
-** for testing when we want to run through the test suite quickly.
-** You are strongly advised *not* to deploy with SQLITE_NO_SYNC
-** enabled, however, since with SQLITE_NO_SYNC enabled, an OS crash
-** or power failure will likely corrupt the database file.
-**
-** SQLite sets the dataOnly flag if the size of the file is unchanged.
-** The idea behind dataOnly is that it should only write the file content
-** to disk, not the inode. We only set dataOnly if the file size is
-** unchanged since the file size is part of the inode. However,
-** Ted Ts'o tells us that fdatasync() will also write the inode if the
-** file size has changed. The only real difference between fdatasync()
-** and fsync(), Ted tells us, is that fdatasync() will not flush the
-** inode if the mtime or owner or other inode attributes have changed.
-** We only care about the file size, not the other file attributes, so
-** as far as SQLite is concerned, an fdatasync() is always adequate.
-** So, we always use fdatasync() if it is available, regardless of
-** the value of the dataOnly flag.
-*/
-static int full_fsync(int fd, int fullSync, int dataOnly){
- int rc;
-
- /* The following "ifdef/elif/else/" block has the same structure as
- ** the one below. It is replicated here solely to avoid cluttering
- ** up the real code with the UNUSED_PARAMETER() macros.
- */
-#ifdef SQLITE_NO_SYNC
- UNUSED_PARAMETER(fd);
- UNUSED_PARAMETER(fullSync);
- UNUSED_PARAMETER(dataOnly);
-#elif HAVE_FULLFSYNC
- UNUSED_PARAMETER(dataOnly);
-#else
- UNUSED_PARAMETER(fullSync);
- UNUSED_PARAMETER(dataOnly);
-#endif
-
- /* Record the number of times that we do a normal fsync() and
- ** FULLSYNC. This is used during testing to verify that this procedure
- ** gets called with the correct arguments.
- */
-#ifdef SQLITE_TEST
- if( fullSync ) sqlite3_fullsync_count++;
- sqlite3_sync_count++;
-#endif
-
- /* If we compiled with the SQLITE_NO_SYNC flag, then syncing is a
- ** no-op. But go ahead and call fstat() to validate the file
- ** descriptor as we need a method to provoke a failure during
- ** coverate testing.
- */
-#ifdef SQLITE_NO_SYNC
- {
- struct stat buf;
- rc = osFstat(fd, &buf);
- }
-#elif HAVE_FULLFSYNC
- if( fullSync ){
- rc = osFcntl(fd, F_FULLFSYNC, 0);
- }else{
- rc = 1;
- }
- /* If the FULLFSYNC failed, fall back to attempting an fsync().
- ** It shouldn't be possible for fullfsync to fail on the local
- ** file system (on OSX), so failure indicates that FULLFSYNC
- ** isn't supported for this file system. So, attempt an fsync
- ** and (for now) ignore the overhead of a superfluous fcntl call.
- ** It'd be better to detect fullfsync support once and avoid
- ** the fcntl call every time sync is called.
- */
- if( rc ) rc = fsync(fd);
-
-#elif defined(__APPLE__)
- /* fdatasync() on HFS+ doesn't yet flush the file size if it changed correctly
- ** so currently we default to the macro that redefines fdatasync to fsync
- */
- rc = fsync(fd);
-#else
- rc = fdatasync(fd);
-#if OS_VXWORKS
- if( rc==-1 && errno==ENOTSUP ){
- rc = fsync(fd);
- }
-#endif /* OS_VXWORKS */
-#endif /* ifdef SQLITE_NO_SYNC elif HAVE_FULLFSYNC */
-
- if( OS_VXWORKS && rc!= -1 ){
- rc = 0;
- }
- return rc;
-}
-
-/*
-** Open a file descriptor to the directory containing file zFilename.
-** If successful, *pFd is set to the opened file descriptor and
-** SQLITE_OK is returned. If an error occurs, either SQLITE_NOMEM
-** or SQLITE_CANTOPEN is returned and *pFd is set to an undefined
-** value.
-**
-** The directory file descriptor is used for only one thing - to
-** fsync() a directory to make sure file creation and deletion events
-** are flushed to disk. Such fsyncs are not needed on newer
-** journaling filesystems, but are required on older filesystems.
-**
-** This routine can be overridden using the xSetSysCall interface.
-** The ability to override this routine was added in support of the
-** chromium sandbox. Opening a directory is a security risk (we are
-** told) so making it overrideable allows the chromium sandbox to
-** replace this routine with a harmless no-op. To make this routine
-** a no-op, replace it with a stub that returns SQLITE_OK but leaves
-** *pFd set to a negative number.
-**
-** If SQLITE_OK is returned, the caller is responsible for closing
-** the file descriptor *pFd using close().
-*/
-static int openDirectory(const char *zFilename, int *pFd){
- int ii;
- int fd = -1;
- char zDirname[MAX_PATHNAME+1];
-
- sqlite3_snprintf(MAX_PATHNAME, zDirname, "%s", zFilename);
- for(ii=(int)strlen(zDirname); ii>0 && zDirname[ii]!='/'; ii--);
- if( ii>0 ){
- zDirname[ii] = '\0';
- }else{
- if( zDirname[0]!='/' ) zDirname[0] = '.';
- zDirname[1] = 0;
- }
- fd = robust_open(zDirname, O_RDONLY|O_BINARY, 0);
- if( fd>=0 ){
- OSTRACE(("OPENDIR %-3d %s\n", fd, zDirname));
- }
- *pFd = fd;
- if( fd>=0 ) return SQLITE_OK;
- return unixLogError(SQLITE_CANTOPEN_BKPT, "openDirectory", zDirname);
-}
-
-/*
-** Make sure all writes to a particular file are committed to disk.
-**
-** If dataOnly==0 then both the file itself and its metadata (file
-** size, access time, etc) are synced. If dataOnly!=0 then only the
-** file data is synced.
-**
-** Under Unix, also make sure that the directory entry for the file
-** has been created by fsync-ing the directory that contains the file.
-** If we do not do this and we encounter a power failure, the directory
-** entry for the journal might not exist after we reboot. The next
-** SQLite to access the file will not know that the journal exists (because
-** the directory entry for the journal was never created) and the transaction
-** will not roll back - possibly leading to database corruption.
-*/
-static int unixSync(sqlite3_file *id, int flags){
- int rc;
- unixFile *pFile = (unixFile*)id;
-
- int isDataOnly = (flags&SQLITE_SYNC_DATAONLY);
- int isFullsync = (flags&0x0F)==SQLITE_SYNC_FULL;
-
- /* Check that one of SQLITE_SYNC_NORMAL or FULL was passed */
- assert((flags&0x0F)==SQLITE_SYNC_NORMAL
- || (flags&0x0F)==SQLITE_SYNC_FULL
- );
-
- /* Unix cannot, but some systems may return SQLITE_FULL from here. This
- ** line is to test that doing so does not cause any problems.
- */
- SimulateDiskfullError( return SQLITE_FULL );
-
- assert( pFile );
- OSTRACE(("SYNC %-3d\n", pFile->h));
- rc = full_fsync(pFile->h, isFullsync, isDataOnly);
- SimulateIOError( rc=1 );
- if( rc ){
- storeLastErrno(pFile, errno);
- return unixLogError(SQLITE_IOERR_FSYNC, "full_fsync", pFile->zPath);
- }
-
- /* Also fsync the directory containing the file if the DIRSYNC flag
- ** is set. This is a one-time occurrence. Many systems (examples: AIX)
- ** are unable to fsync a directory, so ignore errors on the fsync.
- */
- if( pFile->ctrlFlags & UNIXFILE_DIRSYNC ){
- int dirfd;
- OSTRACE(("DIRSYNC %s (have_fullfsync=%d fullsync=%d)\n", pFile->zPath,
- HAVE_FULLFSYNC, isFullsync));
- rc = osOpenDirectory(pFile->zPath, &dirfd);
- if( rc==SQLITE_OK ){
- full_fsync(dirfd, 0, 0);
- robust_close(pFile, dirfd, __LINE__);
- }else{
- assert( rc==SQLITE_CANTOPEN );
- rc = SQLITE_OK;
- }
- pFile->ctrlFlags &= ~UNIXFILE_DIRSYNC;
- }
- return rc;
-}
-
-/*
-** Truncate an open file to a specified size
-*/
-static int unixTruncate(sqlite3_file *id, i64 nByte){
- unixFile *pFile = (unixFile *)id;
- int rc;
- assert( pFile );
- SimulateIOError( return SQLITE_IOERR_TRUNCATE );
-
- /* If the user has configured a chunk-size for this file, truncate the
- ** file so that it consists of an integer number of chunks (i.e. the
- ** actual file size after the operation may be larger than the requested
- ** size).
- */
- if( pFile->szChunk>0 ){
- nByte = ((nByte + pFile->szChunk - 1)/pFile->szChunk) * pFile->szChunk;
- }
-
- rc = robust_ftruncate(pFile->h, nByte);
- if( rc ){
- storeLastErrno(pFile, errno);
- return unixLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
- }else{
-#ifdef SQLITE_DEBUG
- /* If we are doing a normal write to a database file (as opposed to
- ** doing a hot-journal rollback or a write to some file other than a
- ** normal database file) and we truncate the file to zero length,
- ** that effectively updates the change counter. This might happen
- ** when restoring a database using the backup API from a zero-length
- ** source.
- */
- if( pFile->inNormalWrite && nByte==0 ){
- pFile->transCntrChng = 1;
- }
-#endif
-
-#if SQLITE_MAX_MMAP_SIZE>0
- /* If the file was just truncated to a size smaller than the currently
- ** mapped region, reduce the effective mapping size as well. SQLite will
- ** use read() and write() to access data beyond this point from now on.
- */
- if( nBytemmapSize ){
- pFile->mmapSize = nByte;
- }
-#endif
-
- return SQLITE_OK;
- }
-}
-
-/*
-** Determine the current size of a file in bytes
-*/
-static int unixFileSize(sqlite3_file *id, i64 *pSize){
- int rc;
- struct stat buf;
- assert( id );
- rc = osFstat(((unixFile*)id)->h, &buf);
- SimulateIOError( rc=1 );
- if( rc!=0 ){
- storeLastErrno((unixFile*)id, errno);
- return SQLITE_IOERR_FSTAT;
- }
- *pSize = buf.st_size;
-
- /* When opening a zero-size database, the findInodeInfo() procedure
- ** writes a single byte into that file in order to work around a bug
- ** in the OS-X msdos filesystem. In order to avoid problems with upper
- ** layers, we need to report this file size as zero even though it is
- ** really 1. Ticket #3260.
- */
- if( *pSize==1 ) *pSize = 0;
-
-
- return SQLITE_OK;
-}
-
-#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
-/*
-** Handler for proxy-locking file-control verbs. Defined below in the
-** proxying locking division.
-*/
-static int proxyFileControl(sqlite3_file*,int,void*);
-#endif
-
-/*
-** This function is called to handle the SQLITE_FCNTL_SIZE_HINT
-** file-control operation. Enlarge the database to nBytes in size
-** (rounded up to the next chunk-size). If the database is already
-** nBytes or larger, this routine is a no-op.
-*/
-static int fcntlSizeHint(unixFile *pFile, i64 nByte){
- if( pFile->szChunk>0 ){
- i64 nSize; /* Required file size */
- struct stat buf; /* Used to hold return values of fstat() */
-
- if( osFstat(pFile->h, &buf) ){
- return SQLITE_IOERR_FSTAT;
- }
-
- nSize = ((nByte+pFile->szChunk-1) / pFile->szChunk) * pFile->szChunk;
- if( nSize>(i64)buf.st_size ){
-
-#if defined(HAVE_POSIX_FALLOCATE) && HAVE_POSIX_FALLOCATE
- /* The code below is handling the return value of osFallocate()
- ** correctly. posix_fallocate() is defined to "returns zero on success,
- ** or an error number on failure". See the manpage for details. */
- int err;
- do{
- err = osFallocate(pFile->h, buf.st_size, nSize-buf.st_size);
- }while( err==EINTR );
- if( err ) return SQLITE_IOERR_WRITE;
-#else
- /* If the OS does not have posix_fallocate(), fake it. Write a
- ** single byte to the last byte in each block that falls entirely
- ** within the extended region. Then, if required, a single byte
- ** at offset (nSize-1), to set the size of the file correctly.
- ** This is a similar technique to that used by glibc on systems
- ** that do not have a real fallocate() call.
- */
- int nBlk = buf.st_blksize; /* File-system block size */
- int nWrite = 0; /* Number of bytes written by seekAndWrite */
- i64 iWrite; /* Next offset to write to */
-
- iWrite = (buf.st_size/nBlk)*nBlk + nBlk - 1;
- assert( iWrite>=buf.st_size );
- assert( ((iWrite+1)%nBlk)==0 );
- for(/*no-op*/; iWrite=nSize ) iWrite = nSize - 1;
- nWrite = seekAndWrite(pFile, iWrite, "", 1);
- if( nWrite!=1 ) return SQLITE_IOERR_WRITE;
- }
-#endif
- }
- }
-
-#if SQLITE_MAX_MMAP_SIZE>0
- if( pFile->mmapSizeMax>0 && nByte>pFile->mmapSize ){
- int rc;
- if( pFile->szChunk<=0 ){
- if( robust_ftruncate(pFile->h, nByte) ){
- storeLastErrno(pFile, errno);
- return unixLogError(SQLITE_IOERR_TRUNCATE, "ftruncate", pFile->zPath);
- }
- }
-
- rc = unixMapfile(pFile, nByte);
- return rc;
- }
-#endif
-
- return SQLITE_OK;
-}
-
-/*
-** If *pArg is initially negative then this is a query. Set *pArg to
-** 1 or 0 depending on whether or not bit mask of pFile->ctrlFlags is set.
-**
-** If *pArg is 0 or 1, then clear or set the mask bit of pFile->ctrlFlags.
-*/
-static void unixModeBit(unixFile *pFile, unsigned char mask, int *pArg){
- if( *pArg<0 ){
- *pArg = (pFile->ctrlFlags & mask)!=0;
- }else if( (*pArg)==0 ){
- pFile->ctrlFlags &= ~mask;
- }else{
- pFile->ctrlFlags |= mask;
- }
-}
-
-/* Forward declaration */
-static int unixGetTempname(int nBuf, char *zBuf);
-
-/*
-** Information and control of an open file handle.
-*/
-static int unixFileControl(sqlite3_file *id, int op, void *pArg){
- unixFile *pFile = (unixFile*)id;
- switch( op ){
- case SQLITE_FCNTL_LOCKSTATE: {
- *(int*)pArg = pFile->eFileLock;
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_LAST_ERRNO: {
- *(int*)pArg = pFile->lastErrno;
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_CHUNK_SIZE: {
- pFile->szChunk = *(int *)pArg;
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_SIZE_HINT: {
- int rc;
- SimulateIOErrorBenign(1);
- rc = fcntlSizeHint(pFile, *(i64 *)pArg);
- SimulateIOErrorBenign(0);
- return rc;
- }
- case SQLITE_FCNTL_PERSIST_WAL: {
- unixModeBit(pFile, UNIXFILE_PERSIST_WAL, (int*)pArg);
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_POWERSAFE_OVERWRITE: {
- unixModeBit(pFile, UNIXFILE_PSOW, (int*)pArg);
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_VFSNAME: {
- *(char**)pArg = sqlite3_mprintf("%s", pFile->pVfs->zName);
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_TEMPFILENAME: {
- char *zTFile = sqlite3_malloc64( pFile->pVfs->mxPathname );
- if( zTFile ){
- unixGetTempname(pFile->pVfs->mxPathname, zTFile);
- *(char**)pArg = zTFile;
- }
- return SQLITE_OK;
- }
- case SQLITE_FCNTL_HAS_MOVED: {
- *(int*)pArg = fileHasMoved(pFile);
- return SQLITE_OK;
- }
-#if SQLITE_MAX_MMAP_SIZE>0
- case SQLITE_FCNTL_MMAP_SIZE: {
- i64 newLimit = *(i64*)pArg;
- int rc = SQLITE_OK;
- if( newLimit>sqlite3GlobalConfig.mxMmap ){
- newLimit = sqlite3GlobalConfig.mxMmap;
- }
- *(i64*)pArg = pFile->mmapSizeMax;
- if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){
- pFile->mmapSizeMax = newLimit;
- if( pFile->mmapSize>0 ){
- unixUnmapfile(pFile);
- rc = unixMapfile(pFile, -1);
- }
- }
- return rc;
- }
-#endif
-#ifdef SQLITE_DEBUG
- /* The pager calls this method to signal that it has done
- ** a rollback and that the database is therefore unchanged and
- ** it hence it is OK for the transaction change counter to be
- ** unchanged.
- */
- case SQLITE_FCNTL_DB_UNCHANGED: {
- ((unixFile*)id)->dbUpdate = 0;
- return SQLITE_OK;
- }
-#endif
-#if SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__)
- case SQLITE_FCNTL_SET_LOCKPROXYFILE:
- case SQLITE_FCNTL_GET_LOCKPROXYFILE: {
- return proxyFileControl(id,op,pArg);
- }
-#endif /* SQLITE_ENABLE_LOCKING_STYLE && defined(__APPLE__) */
- }
- return SQLITE_NOTFOUND;
-}
-
-/*
-** Return the sector size in bytes of the underlying block device for
-** the specified file. This is almost always 512 bytes, but may be
-** larger for some devices.
-**
-** SQLite code assumes this function cannot fail. It also assumes that
-** if two files are created in the same file-system directory (i.e.
-** a database and its journal file) that the sector size will be the
-** same for both.
-*/
-#ifndef __QNXNTO__
-static int unixSectorSize(sqlite3_file *NotUsed){
- UNUSED_PARAMETER(NotUsed);
- return SQLITE_DEFAULT_SECTOR_SIZE;
-}
-#endif
-
-/*
-** The following version of unixSectorSize() is optimized for QNX.
-*/
-#ifdef __QNXNTO__
-#include
-#include
-static int unixSectorSize(sqlite3_file *id){
- unixFile *pFile = (unixFile*)id;
- if( pFile->sectorSize == 0 ){
- struct statvfs fsInfo;
-
- /* Set defaults for non-supported filesystems */
- pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
- pFile->deviceCharacteristics = 0;
- if( fstatvfs(pFile->h, &fsInfo) == -1 ) {
- return pFile->sectorSize;
- }
-
- if( !strcmp(fsInfo.f_basetype, "tmp") ) {
- pFile->sectorSize = fsInfo.f_bsize;
- pFile->deviceCharacteristics =
- SQLITE_IOCAP_ATOMIC4K | /* All ram filesystem writes are atomic */
- SQLITE_IOCAP_SAFE_APPEND | /* growing the file does not occur until
- ** the write succeeds */
- SQLITE_IOCAP_SEQUENTIAL | /* The ram filesystem has no write behind
- ** so it is ordered */
- 0;
- }else if( strstr(fsInfo.f_basetype, "etfs") ){
- pFile->sectorSize = fsInfo.f_bsize;
- pFile->deviceCharacteristics =
- /* etfs cluster size writes are atomic */
- (pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) |
- SQLITE_IOCAP_SAFE_APPEND | /* growing the file does not occur until
- ** the write succeeds */
- SQLITE_IOCAP_SEQUENTIAL | /* The ram filesystem has no write behind
- ** so it is ordered */
- 0;
- }else if( !strcmp(fsInfo.f_basetype, "qnx6") ){
- pFile->sectorSize = fsInfo.f_bsize;
- pFile->deviceCharacteristics =
- SQLITE_IOCAP_ATOMIC | /* All filesystem writes are atomic */
- SQLITE_IOCAP_SAFE_APPEND | /* growing the file does not occur until
- ** the write succeeds */
- SQLITE_IOCAP_SEQUENTIAL | /* The ram filesystem has no write behind
- ** so it is ordered */
- 0;
- }else if( !strcmp(fsInfo.f_basetype, "qnx4") ){
- pFile->sectorSize = fsInfo.f_bsize;
- pFile->deviceCharacteristics =
- /* full bitset of atomics from max sector size and smaller */
- ((pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) << 1) - 2 |
- SQLITE_IOCAP_SEQUENTIAL | /* The ram filesystem has no write behind
- ** so it is ordered */
- 0;
- }else if( strstr(fsInfo.f_basetype, "dos") ){
- pFile->sectorSize = fsInfo.f_bsize;
- pFile->deviceCharacteristics =
- /* full bitset of atomics from max sector size and smaller */
- ((pFile->sectorSize / 512 * SQLITE_IOCAP_ATOMIC512) << 1) - 2 |
- SQLITE_IOCAP_SEQUENTIAL | /* The ram filesystem has no write behind
- ** so it is ordered */
- 0;
- }else{
- pFile->deviceCharacteristics =
- SQLITE_IOCAP_ATOMIC512 | /* blocks are atomic */
- SQLITE_IOCAP_SAFE_APPEND | /* growing the file does not occur until
- ** the write succeeds */
- 0;
- }
- }
- /* Last chance verification. If the sector size isn't a multiple of 512
- ** then it isn't valid.*/
- if( pFile->sectorSize % 512 != 0 ){
- pFile->deviceCharacteristics = 0;
- pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE;
- }
- return pFile->sectorSize;
-}
-#endif /* __QNXNTO__ */
-
-/*
-** Return the device characteristics for the file.
-**
-** This VFS is set up to return SQLITE_IOCAP_POWERSAFE_OVERWRITE by default.
-** However, that choice is controversial since technically the underlying
-** file system does not always provide powersafe overwrites. (In other
-** words, after a power-loss event, parts of the file that were never
-** written might end up being altered.) However, non-PSOW behavior is very,
-** very rare. And asserting PSOW makes a large reduction in the amount
-** of required I/O for journaling, since a lot of padding is eliminated.
-** Hence, while POWERSAFE_OVERWRITE is on by default, there is a file-control
-** available to turn it off and URI query parameter available to turn it off.
-*/
-static int unixDeviceCharacteristics(sqlite3_file *id){
- unixFile *p = (unixFile*)id;
- int rc = 0;
-#ifdef __QNXNTO__
- if( p->sectorSize==0 ) unixSectorSize(id);
- rc = p->deviceCharacteristics;
-#endif
- if( p->ctrlFlags & UNIXFILE_PSOW ){
- rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE;
- }
- return rc;
-}
-
-#if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0
-
-/*
-** Return the system page size.
-**
-** This function should not be called directly by other code in this file.
-** Instead, it should be called via macro osGetpagesize().
-*/
-static int unixGetpagesize(void){
-#if OS_VXWORKS
- return 1024;
-#elif defined(_BSD_SOURCE)
- return getpagesize();
-#else
- return (int)sysconf(_SC_PAGESIZE);
-#endif
-}
-
-#endif /* !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 */
-
-#ifndef SQLITE_OMIT_WAL
-
-/*
-** Object used to represent an shared memory buffer.
-**
-** When multiple threads all reference the same wal-index, each thread
-** has its own unixShm object, but they all point to a single instance
-** of this unixShmNode object. In other words, each wal-index is opened
-** only once per process.
-**
-** Each unixShmNode object is connected to a single unixInodeInfo object.
-** We could coalesce this object into unixInodeInfo, but that would mean
-** every open file that does not use shared memory (in other words, most
-** open files) would have to carry around this extra information. So
-** the unixInodeInfo object contains a pointer to this unixShmNode object
-** and the unixShmNode object is created only when needed.
-**
-** unixMutexHeld() must be true when creating or destroying
-** this object or while reading or writing the following fields:
-**
-** nRef
-**
-** The following fields are read-only after the object is created:
-**
-** fid
-** zFilename
-**
-** Either unixShmNode.mutex must be held or unixShmNode.nRef==0 and
-** unixMutexHeld() is true when reading or writing any other field
-** in this structure.
-*/
-struct unixShmNode {
- unixInodeInfo *pInode; /* unixInodeInfo that owns this SHM node */
- sqlite3_mutex *mutex; /* Mutex to access this object */
- char *zFilename; /* Name of the mmapped file */
- int h; /* Open file descriptor */
- int szRegion; /* Size of shared-memory regions */
- u16 nRegion; /* Size of array apRegion */
- u8 isReadonly; /* True if read-only */
- char **apRegion; /* Array of mapped shared-memory regions */
- int nRef; /* Number of unixShm objects pointing to this */
- unixShm *pFirst; /* All unixShm objects pointing to this */
-#ifdef SQLITE_DEBUG
- u8 exclMask; /* Mask of exclusive locks held */
- u8 sharedMask; /* Mask of shared locks held */
- u8 nextShmId; /* Next available unixShm.id value */
-#endif
-};
-
-/*
-** Structure used internally by this VFS to record the state of an
-** open shared memory connection.
-**
-** The following fields are initialized when this object is created and
-** are read-only thereafter:
-**
-** unixShm.pFile
-** unixShm.id
-**
-** All other fields are read/write. The unixShm.pFile->mutex must be held
-** while accessing any read/write fields.
-*/
-struct unixShm {
- unixShmNode *pShmNode; /* The underlying unixShmNode object */
- unixShm *pNext; /* Next unixShm with the same unixShmNode */
- u8 hasMutex; /* True if holding the unixShmNode mutex */
- u8 id; /* Id of this connection within its unixShmNode */
- u16 sharedMask; /* Mask of shared locks held */
- u16 exclMask; /* Mask of exclusive locks held */
-};
-
-/*
-** Constants used for locking
-*/
-#define UNIX_SHM_BASE ((22+SQLITE_SHM_NLOCK)*4) /* first lock byte */
-#define UNIX_SHM_DMS (UNIX_SHM_BASE+SQLITE_SHM_NLOCK) /* deadman switch */
-
-/*
-** Apply posix advisory locks for all bytes from ofst through ofst+n-1.
-**
-** Locks block if the mask is exactly UNIX_SHM_C and are non-blocking
-** otherwise.
-*/
-static int unixShmSystemLock(
- unixFile *pFile, /* Open connection to the WAL file */
- int lockType, /* F_UNLCK, F_RDLCK, or F_WRLCK */
- int ofst, /* First byte of the locking range */
- int n /* Number of bytes to lock */
-){
- unixShmNode *pShmNode; /* Apply locks to this open shared-memory segment */
- struct flock f; /* The posix advisory locking structure */
- int rc = SQLITE_OK; /* Result code form fcntl() */
-
- /* Access to the unixShmNode object is serialized by the caller */
- pShmNode = pFile->pInode->pShmNode;
- assert( sqlite3_mutex_held(pShmNode->mutex) || pShmNode->nRef==0 );
-
- /* Shared locks never span more than one byte */
- assert( n==1 || lockType!=F_RDLCK );
-
- /* Locks are within range */
- assert( n>=1 && n<=SQLITE_SHM_NLOCK );
-
- if( pShmNode->h>=0 ){
- /* Initialize the locking parameters */
- memset(&f, 0, sizeof(f));
- f.l_type = lockType;
- f.l_whence = SEEK_SET;
- f.l_start = ofst;
- f.l_len = n;
-
- rc = osFcntl(pShmNode->h, F_SETLK, &f);
- rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY;
- }
-
- /* Update the global lock state and do debug tracing */
-#ifdef SQLITE_DEBUG
- { u16 mask;
- OSTRACE(("SHM-LOCK "));
- mask = ofst>31 ? 0xffff : (1<<(ofst+n)) - (1<