Use HTML entities in translation files (#1787)

Normalize menu separators in language XML files
Replace raw > characters in language entry text with the XML entity >,
and normalize remaining -> menu separators to > for consistency with the
existing language files.
The runtime text remains unchanged for escaped > characters because the
language parsers decode XML entities when loading strings.

src/Common/Language.xml

@@ -423,7 +423,7 @@
     <entry lang="en" key="DEVICE_FREE_PB">Size of %s is %.2f PiB</entry>
     <entry lang="en" key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</entry>
     <entry lang="en" key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</entry>
-    <entry lang="en" key="FORMAT_CANT_UNMOUNT_FILESYS">Error: The device/partition contains a file system that could not be unmounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'New Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in VeraCrypt may be wrong now. Therefore, exit the VeraCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf VeraCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</entry>
+    <entry lang="en" key="FORMAT_CANT_UNMOUNT_FILESYS">Error: The device/partition contains a file system that could not be unmounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' &gt; 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'New Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in VeraCrypt may be wrong now. Therefore, exit the VeraCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf VeraCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</entry>
     <entry lang="en" key="INPLACE_ENC_CANT_LOCK_OR_UNMOUNT_FILESYS">Error: The filesystem could not be locked and/or unmounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</entry>
     <entry lang="en" key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</entry>
     <entry lang="en" key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable VeraCrypt to format it safely.</entry>
@@ -437,8 +437,8 @@
     <entry lang="en" key="INPLACE_ENC_ALTERNATIVE_STEPS">To encrypt the data on this partition, please follow these steps:\n\n1) Create a VeraCrypt volume on an empty partition/device and then mount it.\n\n2) Copy all files from the partition that you originally wanted to encrypt to the mounted VeraCrypt volume (that has been created and mounted in step 1). That way, you will create a VeraCrypt-encrypted backup of the data.\n\n3) Create a VeraCrypt volume on the partition that you originally wanted to encrypt and make sure that (in the VeraCrypt wizard) you choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place"). Note that all data stored on the partition will be erased. After the volume is created, mount it.\n\n4) Copy all files from the mounted backup VeraCrypt volume (created and mounted in step 1) to the mounted VeraCrypt volume that has been created (and mounted) in step 3.\n\nAfter you complete these steps, the data will be encrypted and, in addition, there will be an encrypted backup of the data.</entry>
     <entry lang="en" key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted VeraCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</entry>
     <entry lang="en" key="INPLACE_ENC_INVALID_PATH">Error: VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</entry>
-    <entry lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
-    <entry lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KiB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
+    <entry lang="en" key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties &gt; Tools &gt; 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
+    <entry lang="en" key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KiB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties &gt; Tools &gt; 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
     <entry lang="en" key="DISK_FREE_BYTES">Free space on drive %s is %.2f bytes.</entry>
     <entry lang="en" key="DISK_FREE_KB">Free space on drive %s is %.2f KiB</entry>
     <entry lang="en" key="DISK_FREE_MB">Free space on drive %s is %.2f MiB</entry>
@@ -447,7 +447,7 @@
     <entry lang="en" key="DISK_FREE_PB">Free space on drive %s is %.2f PiB</entry>
     <entry lang="en" key="DRIVELETTERS">Could not get available drive letters.</entry>
     <entry lang="en" key="DRIVER_NOT_FOUND">Error: VeraCrypt driver not found.\n\nPlease copy the files 'veracrypt.sys' and 'veracrypt-x64.sys' to the directory where the main VeraCrypt application (VeraCrypt.exe) is located.</entry>
-    <entry lang="en" key="DRIVER_VERSION">Error: An incompatible version of the VeraCrypt driver is currently running.\n\nIf you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already installed, you must uninstall it first (or upgrade it using the VeraCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > VeraCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > VeraCrypt > Remove.\n\nSimilarly, if you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already running in portable mode, you must restart the system first and then run only this new version.</entry>
+    <entry lang="en" key="DRIVER_VERSION">Error: An incompatible version of the VeraCrypt driver is currently running.\n\nIf you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already installed, you must uninstall it first (or upgrade it using the VeraCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' &gt; Computer &gt; 'Uninstall or change a program' &gt; VeraCrypt &gt; Uninstall; on Windows XP, select 'Start Menu' &gt; Settings &gt; 'Control Panel' &gt; 'Add Or Remove Programs' &gt; VeraCrypt &gt; Remove.\n\nSimilarly, if you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already running in portable mode, you must restart the system first and then run only this new version.</entry>
     <entry lang="en" key="ERR_CIPHER_INIT_FAILURE">Error: Cipher initialization failure.</entry>
     <entry lang="en" key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</entry>
     <entry lang="en" key="EXCEPTION_REPORT">A critical error has occurred and VeraCrypt must be terminated. If this is caused by a bug in VeraCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- VeraCrypt component name\n- Checksum of VeraCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- VeraCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</entry>
@@ -501,7 +501,7 @@
     <entry lang="en" key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</entry>
     <entry lang="en" key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</entry>
     <entry lang="en" key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</entry>
-    <entry lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system VeraCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</entry>
+    <entry lang="en" key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system VeraCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' &gt; 'Add Mounted Volume to System Favorites').</entry>
     <entry lang="en" key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</entry>
     <entry lang="en" key="FORMAT_FINISHED_HELP">\n\nThe VeraCrypt volume has been created and is ready for use. If you wish to create another VeraCrypt volume, click Next. Otherwise, click Exit.</entry>
     <entry lang="en" key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden VeraCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</entry>
@@ -649,12 +649,12 @@
     <entry lang="en" key="PIM_SMALL_WARNING">You have chosen a Personal Iterations Multiplier (PIM) that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to a weaker security.\n\nDo you confirm that you are using a strong password?</entry>
     <entry lang="en" key="PIM_SYSENC_TOO_BIG">Personal Iterations Multiplier (PIM) maximum value for system encryption is 65535.</entry>
     <entry lang="en" key="PIM_TITLE">Volume PIM</entry>
-    <entry lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</entry>
+    <entry lang="en" key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer &gt; Organize &gt; 'Folder and search options' &gt; View).</entry>
     <entry lang="en" key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</entry>
     <entry lang="en" key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">VeraCrypt has not found any volume where the process of encryption/decryption of a non-system volume has been interrupted and where the volume header can be deciphered using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</entry>
     <entry lang="en" key="SELECTED_PARTITION_ALREADY_INPLACE_ENC">The selected partition/device is already fully encrypted.\nHeader Flags = 0x%.8X</entry>
     <entry lang="en" key="SELECTED_PARTITION_NOT_INPLACE_ENC">The selected partition/device is not using in-place encryption.\nHeader Flags = 0x%.8X</entry>
-    <entry lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</entry>
+    <entry lang="en" key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' &gt; 'Mount Without Pre-Boot Authentication'.</entry>
     <entry lang="en" key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</entry>
     <entry lang="en" key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE">VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive).</entry>
     <entry lang="en" key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE_UNSURE">Warning: As the drive contains the VeraCrypt Boot Loader, it may be an entirely encrypted system drive. If it is, please note that VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive). If that is the case, you will be able to continue now but you will receive the 'Incorrect password' error message later.</entry>
@@ -864,7 +864,7 @@
     <entry lang="en" key="INSTALL_OK">VeraCrypt has been successfully installed.</entry>
     <entry lang="en" key="SETUP_UPDATE_OK">VeraCrypt has been successfully updated.</entry>
     <entry lang="en" key="UPGRADE_OK_REBOOT_REQUIRED">VeraCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</entry>
-    <entry lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade VeraCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'VeraCrypt installation'. If System Restore is not available, you should try installing the original or the new version of VeraCrypt again before you shut down or restart the system.</entry>
+    <entry lang="en" key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade VeraCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu &gt; All programs &gt; Accessories &gt; System Tools &gt; System Restore) to restore your system to the restore point named 'VeraCrypt installation'. If System Restore is not available, you should try installing the original or the new version of VeraCrypt again before you shut down or restart the system.</entry>
     <entry lang="en" key="UNINSTALL_OK">VeraCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the VeraCrypt installer and the folder %s. Note that the folder will not be removed if it contains any files that were not installed by the VeraCrypt installer or created by VeraCrypt.</entry>
     <entry lang="en" key="REMOVING_REG">Removing VeraCrypt registry entries</entry>
     <entry lang="en" key="ADDING_REG">Adding registry entry</entry>
@@ -922,10 +922,10 @@
     <entry lang="en" key="PROGRESS_STATUS_FINISHED">Finished</entry>
     <entry lang="en" key="PROGRESS_STATUS_ERROR">Error</entry>
     <entry lang="en" key="FAVORITE_DISCONNECTED_DEV">Device disconnected</entry>
-    <entry lang="en" key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</entry>
+    <entry lang="en" key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' &gt; 'System Favorite Volumes' &gt; 'Mount system favorite volumes when Windows starts'.</entry>
     <entry lang="en" key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, VeraCrypt will be unable to mount this favorite volume if the device number changes.</entry>
     <entry lang="en" key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nVeraCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</entry>
-    <entry lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">VeraCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or VeraCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the VeraCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'VeraCrypt Background Task'.</entry>
+    <entry lang="en" key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">VeraCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or VeraCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the VeraCrypt Background Task, select Settings &gt; Preferences and check the 'Enabled' checkbox in the section 'VeraCrypt Background Task'.</entry>
     <entry lang="en" key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</entry>
     <entry lang="en" key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</entry>
     <entry lang="en" key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</entry>
@@ -943,7 +943,7 @@
     <entry lang="en" key="KEYFILE_EMPTY_BASE_NAME">Please enter a name for the keyfile(s) to be generated</entry>
     <entry lang="en" key="KEYFILE_INVALID_BASE_NAME">The base name of the keyfile(s) is invalid</entry>
     <entry lang="en" key="KEYFILE_ALREADY_EXISTS">The keyfile '%s' already exists.\nDo you want to overwrite it? The generation process will be stopped if you answer No.</entry>
-    <entry lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! VeraCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</entry>
+    <entry lang="en" key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! VeraCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' &gt; 'Restore Volume Header'.</entry>
     <entry lang="en" key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</entry>
     <entry lang="en" key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</entry>
     <entry lang="en" key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</entry>
@@ -960,15 +960,15 @@
     <entry lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</entry>
     <entry lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</entry>
     <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</entry>
-    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
-    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
+    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
+    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
     <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</entry>
     <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</entry>
-    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
+    <entry lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</entry>
     <entry lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</entry>
-    <entry lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
+    <entry lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</entry>
     <entry lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</entry>
-    <entry lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</entry>
+    <entry lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</entry>
     <entry lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</entry>
     <entry lang="en" key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</entry>
     <entry lang="en" key="SYSTEM_FAVORITES_DLG_TITLE">VeraCrypt - System Favorite Volumes</entry>
@@ -1060,7 +1060,7 @@
     <entry lang="en" key="REPAIRING_FS">Attempting to repair the file system on the VeraCrypt volume mounted as %s...</entry>
     <entry lang="en" key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of VeraCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new VeraCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</entry>
     <entry lang="en" key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted VeraCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</entry>
-    <entry lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</entry>
+    <entry lang="en" key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' &gt; 'System and Maintenance' &gt; 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</entry>
     <entry lang="en" key="MOUNT_TC_VOLUME">Mount VeraCrypt volume</entry>
     <entry lang="en" key="UNMOUNT_ALL_TC_VOLUMES">Unmount all VeraCrypt volumes</entry>
     <entry lang="en" key="UAC_INIT_ERROR">VeraCrypt failed to obtain Administrator privileges.</entry>
@@ -1075,7 +1075,7 @@
     <entry lang="en" key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires VeraCrypt to be installed on the system (you are running VeraCrypt in portable mode).\n\nPlease install VeraCrypt and then try again.</entry>
     <entry lang="en" key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</entry>
     <entry lang="en" key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The VeraCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</entry>
-    <entry lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your VeraCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the VeraCrypt Boot Loader with the Windows system loader.</entry>
+    <entry lang="en" key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your VeraCrypt Rescue Disk ('Repair Options' &gt; 'Restore original system loader') or Windows installation medium to replace the VeraCrypt Boot Loader with the Windows system loader.</entry>
     <entry lang="en" key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</entry>
     <entry lang="en" key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</entry>
     <entry lang="en" key="BOOT_LOADER_FINGERPRINT_CHECK_FAILED">WARNING: The verification of VeraCrypt bootloader fingerprint failed!\nYour disk may have been tampered with by an attacker ("Evil Maid" attack).\n\nThis warning can also be triggered if you restored VeraCrypt boot loader using an Rescue Disk generated using a different VeraCrypt version.\n\nYou are advised to change your password immediately which will also restore the correct VeraCrypt bootloader. It is recommended to reinstall VeraCrypt and to take measures to avoid access to this machine by untrusted entities.</entry>
@@ -1097,7 +1097,7 @@
     <entry lang="en" key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</entry>
     <entry lang="en" key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</entry>
     <entry lang="en" key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. VeraCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, VeraCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</entry>
-    <entry lang="en" key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</entry>
+    <entry lang="en" key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' &gt; 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</entry>
     <entry lang="en" key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</entry>
     <entry lang="en" key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</entry>
     <entry lang="en" key="ALGO_NOT_SUPPORTED_FOR_TRUECRYPT_MODE">This algorithm is not supported for TrueCrypt mode.</entry>
@@ -1200,11 +1200,11 @@
     <entry lang="en" key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use VeraCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</entry>
     <entry lang="en" key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot VeraCrypt Rescue Disk\n\nTo boot a VeraCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the VeraCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The VeraCrypt Rescue Disk screen should appear now. Note: In the VeraCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</entry>
     <entry lang="en" key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use VeraCrypt Rescue Disk (After Encrypting)\n\n</entry>
-    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the VeraCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the VeraCrypt Boot Loader may be damaged. The VeraCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore VeraCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</entry>
-    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but VeraCrypt says that the password is incorrect, the master key or other critical data may be damaged. The VeraCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</entry>
+    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_4">1) If the VeraCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the VeraCrypt Boot Loader may be damaged. The VeraCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' &gt; 'Restore VeraCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</entry>
+    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but VeraCrypt says that the password is incorrect, the master key or other critical data may be damaged. The VeraCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' &gt; 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</entry>
     <entry lang="en" key="RESCUE_DISK_HELP_PORTION_6">3) If the VeraCrypt Boot Loader is damaged, you can avoid running it by booting directly from the VeraCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</entry>
-    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the VeraCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</entry>
-    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run VeraCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular VeraCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).\n\n\n</entry>
+    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the VeraCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' &gt; 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</entry>
+    <entry lang="en" key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run VeraCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' &gt; 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular VeraCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).\n\n\n</entry>
     <entry lang="en" key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your VeraCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</entry>
     <entry lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</entry>
     <entry lang="en" key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</entry>
@@ -1251,9 +1251,9 @@
     <entry lang="en" key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</entry>
     <entry lang="en" key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update VeraCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the VeraCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded VeraCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a VeraCrypt driver and VeraCrypt applications whose version numbers are different from the version number of the VeraCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</entry>
     <entry lang="en" key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system.\n\nYou should run the VeraCrypt installer (whose version number is the same as the one of the VeraCrypt Boot Loader) to update VeraCrypt on this operating system.</entry>
-    <entry lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the VeraCrypt Rescue Disk, you should reinstall VeraCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the VeraCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</entry>
-    <entry lang="en" key="BOOT_LOADER_UPGRADE_OK">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</entry>
-    <entry lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</entry>
+    <entry lang="en" key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the VeraCrypt Rescue Disk, you should reinstall VeraCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the VeraCrypt Rescue Disk, you should update it ('System' &gt; 'Create Rescue Disk').</entry>
+    <entry lang="en" key="BOOT_LOADER_UPGRADE_OK">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' &gt; 'Create Rescue Disk' after you restart your computer.</entry>
+    <entry lang="en" key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' &gt; 'Create Rescue Disk'.</entry>
     <entry lang="en" key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the VeraCrypt Boot Loader.</entry>
     <entry lang="en" key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">VeraCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in VeraCrypt.</entry>
     <entry lang="en" key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that VeraCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, VeraCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in VeraCrypt.</entry>
@@ -1266,8 +1266,8 @@
     <entry lang="en" key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</entry>
     <entry lang="en" key="PKCS11_LIB_LOCATION_HELP">In order to allow VeraCrypt to access a security token or smart card, you need to install a PKCS #11 software library for the token or smart card first. Such a library may be supplied with the device or it may be available for download from the website of the vendor or other third parties.\n\nAfter you install the library, you can either select it manually by clicking 'Select Library' or you can let VeraCrypt find and select it automatically by clicking 'Auto-Detect Library' (only the Windows system directory will be searched).</entry>
     <entry lang="en" key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</entry>
-    <entry lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow VeraCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' > 'Security Tokens'.</entry>
-    <entry lang="en" key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</entry>
+    <entry lang="en" key="NO_PKCS11_MODULE_SPECIFIED">In order to allow VeraCrypt to access a security token or smart card, you need to select a PKCS #11 software library for the token/card first. To do so, select 'Settings' &gt; 'Security Tokens'.</entry>
+    <entry lang="en" key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' &gt; 'Security Tokens'.</entry>
     <entry lang="en" key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</entry>
     <entry lang="en" key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</entry>
     <entry lang="en" key="TOKEN_KEYFILE_NOT_FOUND">Security token keyfile not found.</entry>
@@ -1276,13 +1276,13 @@
     <entry lang="en" key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</entry>
     <entry lang="en" key="SECURITY_TOKEN_ERROR">Security token error</entry>
     <entry lang="en" key="CKR_PIN_INCORRECT">Password for security token is incorrect.</entry>
-    <entry lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by VeraCrypt (select 'Tools' > 'Keyfile Generator').</entry>
+    <entry lang="en" key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by VeraCrypt (select 'Tools' &gt; 'Keyfile Generator').</entry>
     <entry lang="en" key="ALL_TOKEN_SESSIONS_CLOSED">All open security token sessions have been closed.</entry>
     <entry lang="en" key="SELECT_TOKEN_KEYFILES">Select Security Token Keyfiles</entry>
     <entry lang="en" key="TOKEN_SLOT_ID">Slot</entry>
     <entry lang="en" key="TOKEN_NAME">Token name</entry>
     <entry lang="en" key="TOKEN_DATA_OBJECT_LABEL">File name</entry>
-    <entry lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in VeraCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN  English (United States)'.\n5) In VeraCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</entry>
+    <entry lang="en" key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in VeraCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' &gt; 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN  English (United States)'.\n5) In VeraCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</entry>
     <entry lang="en" key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</entry>
     <entry lang="en" key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal VeraCrypt volume actions (such as 'Unmount All', auto-unmount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and unmount system favorite volumes in VeraCrypt'. In addition, when VeraCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main VeraCrypt application window.</entry>
     <entry lang="en" key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and VeraCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the VeraCrypt application window and they cannot be unmounted. Therefore, if you need e.g. to unmount a system favorite volume, please right-click the VeraCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Unmount All' function, 'Auto-Unmount' functions, 'Unmount All' hot keys, etc.</entry>
@@ -1296,13 +1296,13 @@
     <entry lang="en" key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly unmounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted VeraCrypt volume resides, you should always unmount the VeraCrypt volume in VeraCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</entry>
     <entry lang="en" key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly unmounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in VeraCrypt and select 'Repair Filesystem').</entry>
     <entry lang="en" key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the VeraCrypt volume to another, healthy, VeraCrypt volume.\n\nDo you want to repair the filesystem now?</entry>
-    <entry lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in VeraCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</entry>
+    <entry lang="en" key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties &gt; Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in VeraCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties &gt; Read-only), which will suppress this warning.</entry>
     <entry lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</entry>
     <entry lang="en" key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by VeraCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</entry>
     <entry lang="en" key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</entry>
     <entry lang="en" key="NUMBER_OF_THREADS">%d threads</entry>
-    <entry lang="en" key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</entry>
-    <entry lang="en" key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</entry>
+    <entry lang="en" key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' &gt; 'Performance' and enable the corresponding option.</entry>
+    <entry lang="en" key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' &gt; 'Performance' and disable the corresponding option.</entry>
     <entry lang="en" key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want VeraCrypt to attempt to disable write protection of the partition/drive?</entry>
     <entry lang="en" key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</entry>
     <entry lang="en" key="HOST_DEVICE_REMOVAL_UNMOUNT_WARN_TITLE">Warning: VeraCrypt volume auto-unmounted</entry>
@@ -1406,8 +1406,8 @@
     <entry lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</entry>
     <entry lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</entry>
     <entry lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</entry>
-    <entry lang="en" key="RESCUE_DISK_EFI_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk image to a USB stick, please eject it and reinsert it; then try again. If this does not help, please try other ZIP software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
-    <entry lang="en" key="RESCUE_DISK_EFI_NON_WIZARD_CREATION">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to extract the Rescue Disk image to a USB stick that is formatted as FAT/FAT32.\n\nIMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\nAfter you create the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly created.</entry>
+    <entry lang="en" key="RESCUE_DISK_EFI_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk image to a USB stick, please eject it and reinsert it; then try again. If this does not help, please try other ZIP software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</entry>
+    <entry lang="en" key="RESCUE_DISK_EFI_NON_WIZARD_CREATION">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to extract the Rescue Disk image to a USB stick that is formatted as FAT/FAT32.\n\nIMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\nAfter you create the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly created.</entry>
     <entry lang="en" key="IDC_SECURE_DESKTOP_PASSWORD_ENTRY">Use Secure Desktop for password entry</entry>
     <entry lang="en" key="ERR_REFS_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected ReFS filesystem.</entry>
     <entry lang="en" key="IDC_EDIT_DCSPROP">Edit Boot Loader Configuration</entry>
@@ -1417,7 +1417,7 @@
     <entry lang="en" key="EDIT_DCSPROP_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to manually edit boot loader configurations.\n\nContinue?</entry>
     <entry lang="en" key="DCSPROP_XML_VALIDATION_FAILED">WARNING: Failed to validate the XML format of the Boot Loader configuration. Please check your modifications.</entry>
     <entry lang="en" key="IDT_ADVANCED_OPTIONS">Advanced Options</entry>
-    <entry lang="en" key="AFTER_UPGRADE_RESCUE_DISK">It is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.\nDo you want to do it now?</entry>
+    <entry lang="en" key="AFTER_UPGRADE_RESCUE_DISK">It is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' &gt; 'Create Rescue Disk'.\nDo you want to do it now?</entry>
     <entry lang="en" key="IDC_ALLOW_TRIM_NONSYS_SSD">Allow TRIM command for non-system SSD partition/drive</entry>
     <entry lang="en" key="IDC_BLOCK_SYSENC_TRIM">Block TRIM command on system partition/drive</entry>
     <entry lang="en" key="WINDOWS_EFI_BOOT_LOADER_MISSING">ERROR: Windows EFI system loader could not be located on the disk. Operation will be aborted.</entry>
@@ -1527,7 +1527,7 @@
     <entry lang="en" key="LINUX_EX2MSG_DEVICESECTORSIZEMISMATCH">Storage device and VC volume sector size mismatch</entry>
     <entry lang="en" key="LINUX_EX2MSG_ENCRYPTEDSYSTEMREQUIRED">This operation must be performed only when the system hosted on the volume is running.</entry>
     <entry lang="en" key="LINUX_EX2MSG_INSUFFICIENTDATA">Not enough data available.</entry>
-    <entry lang="en" key="LINUX_EX2MSG_KERNELCRYPTOSERVICETESTFAILED">Kernel cryptographic service test failed. The cryptographic service of your kernel most likely does not support volumes larger than 2 TB.\n\nPossible solutions:\n- Upgrade the Linux kernel to version 2.6.33 or later.\n- Disable use of the kernel cryptographic services (Settings > Preferences > System Integration) or use 'nokernelcrypto' mount option on the command line.</entry>
+    <entry lang="en" key="LINUX_EX2MSG_KERNELCRYPTOSERVICETESTFAILED">Kernel cryptographic service test failed. The cryptographic service of your kernel most likely does not support volumes larger than 2 TB.\n\nPossible solutions:\n- Upgrade the Linux kernel to version 2.6.33 or later.\n- Disable use of the kernel cryptographic services (Settings &gt; Preferences &gt; System Integration) or use 'nokernelcrypto' mount option on the command line.</entry>
     <entry lang="en" key="LINUX_EX2MSG_LOOPDEVICESETUPFAILED">Failed to set up a loop device.</entry>
     <entry lang="en" key="LINUX_EX2MSG_MISSINGARGUMENT">A required argument is missing.</entry>
     <entry lang="en" key="LINUX_EX2MSG_MISSINGVOLUMEDATA">Volume data missing.</entry>
@@ -1535,7 +1535,7 @@
     <entry lang="en" key="LINUX_EX2MSG_MOUNTPOINTUNAVAILABLE">Mount point is already in use.</entry>
     <entry lang="en" key="LINUX_EX2MSG_PASSWORDEMPTY">No password or keyfile specified.</entry>
     <entry lang="en" key="LINUX_EX2MSG_PASSWORDORKEYBOARDLAYOUTINCORRECT">\n\nNote that pre-boot authentication passwords need to be typed in the pre-boot environment where non-US keyboard layouts are not available. Therefore, pre-boot authentication passwords must always be typed using the standard US keyboard layout (otherwise, the password will be typed incorrectly in most cases). However, note that you do NOT need a real US keyboard; you just need to change the keyboard layout in your operating system.</entry>
-    <entry lang="en" key="LINUX_EX2MSG_PASSWORDORMOUNTOPTIONSINCORRECT">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'Options >' > 'Mount partition using system encryption'.</entry>
+    <entry lang="en" key="LINUX_EX2MSG_PASSWORDORMOUNTOPTIONSINCORRECT">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'Options &gt;' &gt; 'Mount partition using system encryption'.</entry>
     <entry lang="en" key="LINUX_EX2MSG_PASSWORDTOOLONG">Password is longer than {0} characters.</entry>
     <entry lang="en" key="LINUX_EX2MSG_PARTITIONDEVICEREQUIRED">Partition device required.</entry>
     <entry lang="en" key="LINUX_EX2MSG_PROTECTIONPASSWORDINCORRECT">Incorrect password to the protected hidden volume or the hidden volume does not exist.</entry>
@@ -1544,7 +1544,7 @@
     <entry lang="en" key="LINUX_EX2MSG_STRINGFORMATTEREXCEPTION">Error while parsing formatted string.</entry>
     <entry lang="en" key="LINUX_EX2MSG_TEMPORARYDIRECTORYFAILURE">Failed to create a file or directory in a temporary directory.\n\nPlease make sure that the temporary directory exists, its security permissions allow you to access it, and there is sufficient disk space.</entry>
     <entry lang="en" key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZEHIDDENVOLUMEPROTECTION">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.</entry>
-    <entry lang="en" key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZENOKERNELCRYPTO">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.</entry>
+    <entry lang="en" key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZENOKERNELCRYPTO">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences &gt; System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.</entry>
     <entry lang="en" key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZE">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use VeraCrypt on another platform.</entry>
     <entry lang="en" key="LINUX_EX2MSG_VOLUMEHOSTINUSE">The host file/device is already in use.</entry>
     <entry lang="en" key="LINUX_EX2MSG_VOLUMESLOTUNAVAILABLE">Volume slot unavailable.</entry>