mirror of
https://github.com/veracrypt/VeraCrypt.git
synced 2026-06-10 06:46:59 -05:00
Linux/macOS: fix hidden volume FAT size limit
The Unix volume creation wizard applied the FAT32 sector-count limit as a blanket check for device-hosted hidden-volume outer volumes. On 512e disks Linux reports 512-byte logical sectors, so this incorrectly rejected larger device-hosted outer volumes even when the selected outer filesystem was not FAT. Compute the actual VeraCrypt filesystem/data area size through a shared helper and apply the FAT32 size limit only when FAT is selected. This preserves correct FAT validation while allowing non-FAT outer volumes to proceed to the existing hidden-volume size estimation flow. Update text-mode creation so FAT is not offered when the selected size cannot support it, and default to the platform native filesystem in that case. Clarify the user-facing FAT limit wording to refer to logical sector size. Fixes #262
This commit is contained in:
Mounir IDRASSI
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="ar" key="LINUX_MOUNTET_HINT">نظام الملفات للجهاز المحدد مثبت حاليًا. يرجى إلغاء تركيب '{0}' قبل المتابعة.</entry>
|
||||
<entry lang="ar" key="LINUX_HIDDEN_PASS_NO_DIFF">لا يمكن أن يكون للحجم المخفي نفس كلمة المرور و PIM وملفات المفاتيح للحجم الخارجي</entry>
|
||||
<entry lang="ar" key="LINUX_NOT_FAT_HINT">يرجى ملاحظة أن الحجم لن يتم تنسيقه بنظام ملفات FAT، ولهذا السبب، قد تحتاج إلى تثبيت برامج تشغيل لنظام الملفات على منصات غير {0}، والتي ستمكنك من تركيب الحجم.</entry>
|
||||
<entry lang="ar" key="LINUX_ERROR_SIZE_HIDDEN_VOL">خطأ: الحجم المخفي الذي سيتم إنشاؤه أكبر من {0} تيرابايت ({1} جيجابايت).\n\nالحلول الممكنة:\n- إنشاء حاوية / قسم أصغر من {0} تيرابايت.\n</entry>
|
||||
<entry lang="ar" key="LINUX_MAX_SIZE_HINT">- استخدام محرك بأحجام قطاع 4096 بايت لتتمكن من إنشاء أحجام مخفية مستضافة على أقسام / أجهزة تصل إلى 16 تيرابايت</entry>
|
||||
<entry lang="ar" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="ar" key="LINUX_NOT_SUPPORTED">(غير مدعوم بواسطة المكونات المتاحة على هذا النظام).\n</entry>
|
||||
<entry lang="ar" key="LINUX_KERNEL_OLD">نظامك يستخدم إصدارًا قديمًا من نواة لينكس.\n\nنظرًا لخلل في نواة لينكس، قد يتوقف نظامك عن الاستجابة عند كتابة البيانات إلى حجم VeraCrypt. يمكن حل هذه المشكلة بترقية النواة إلى الإصدار 2.6.24 أو أحدث.</entry>
|
||||
<entry lang="ar" key="LINUX_VOL_UNMOUNTED">تم إلغاء تركيب الحجم {0}.</entry>
|
||||
<entry lang="ar" key="LINUX_VOL_MOUNTED">تم تركيب الحجم {0}.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1539,10 +1539,6 @@ Information about Corsican localization:
|
||||
<entry lang="co" key="LINUX_MOUNTET_HINT">U sistema di schedarii di l’apparechju selezziunatu hè attualmente muntatu. Smuntate « {0} » prima di cuntinuà.</entry>
|
||||
<entry lang="co" key="LINUX_HIDDEN_PASS_NO_DIFF">U vulume piattatu ùn pò micca avè i listessi parolla d’intesa, PIM è schedarii chjave chè u vulume esternu</entry>
|
||||
<entry lang="co" key="LINUX_NOT_FAT_HINT">Sappiate chì u vulume ùn serà micca messu à u furmatu cù un sistema di schedarii FAT è, in cunsequenza, puderia esse bisognu à installà piloti addiziunale di u sistema di schedarii nant’à piattaforme altre chè {0}, ciò chì vi permetterà di muntà u vulume.</entry>
|
||||
<entry lang="co" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Sbagliu : U vulume piattatu à creà hè più maiò chè {0} To ({1} Go).\n\nSuluzioni pussibule :\n- Creà un cuntenidore o una partizione più chjucu(a) chè {0} To.\n</entry>
|
||||
<entry lang="co" key="LINUX_MAX_SIZE_HINT">- Impiegà un lettore cù settori di 4096 ottetti per pudè creà vulumi piattati ospitati in una partizione o in un apparechju d’una dimensione sin’à 16 To</entry>
|
||||
<entry lang="co" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="co" key="LINUX_NOT_SUPPORTED">(micca accettatu da i cumpunenti dispunibule nant’à sta piattaforma).\n</entry>
|
||||
<entry lang="co" key="LINUX_KERNEL_OLD">U vostru sistema impiegheghja una vechja versione di u nocciulu Linux.\n\nPer via d’un prublema in u nocciulu Linux, u vostru sistema puderia piantassi di risponde quandu si scrive i dati nant’à u vulume VeraCrypt. Stu prublema pò esse currettu mittendu à livellu u nocciulu à a versione 2.6.24 o più recente.</entry>
|
||||
<entry lang="co" key="LINUX_VOL_UNMOUNTED">U vulume {0} hè statu smuntatu.</entry>
|
||||
<entry lang="co" key="LINUX_VOL_MOUNTED">U vulume {0} hè statu muntatu.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="cs" key="LINUX_MOUNTET_HINT">Souborový systém vybraného zařízení je aktuálně připojen. Před pokračováním prosím odpojte '{0}'.</entry>
|
||||
<entry lang="cs" key="LINUX_HIDDEN_PASS_NO_DIFF">Skrytý svazek nemůže mít stejné heslo, PIM a klíčové soubory jako vnější svazek</entry>
|
||||
<entry lang="cs" key="LINUX_NOT_FAT_HINT">Upozorňujeme, že svazek nebude naformátován systémem souborů FAT, a proto může být nutné na jiných platformách než {0} nainstalovat další ovladače souborového systému, jenž umožní připojení svazku.</entry>
|
||||
<entry lang="cs" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Chyba: Skrytý svazek, který má být vytvořen, je větší než {0} TB ({1} GB).\n\nMožná řešení:\n– Vytvořte kontejner/diskový oddíl menší než {0} TB.\n</entry>
|
||||
<entry lang="cs" key="LINUX_MAX_SIZE_HINT">- Použijte disk s 4096bajtovými sektory, abyste mohli vytvářet skryté svazky s diskovými oddíly/zařízeními o velikosti až 16 TB.</entry>
|
||||
<entry lang="cs" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="cs" key="LINUX_NOT_SUPPORTED"> (není podporováno komponentami dostupnými na této platformě).\n</entry>
|
||||
<entry lang="cs" key="LINUX_KERNEL_OLD">Váš systém používá starou verzi linuxového jádra.\n\nV důsledku chyby v linuxovém jádře může systém přestat reagovat při zápisu dat na svazek VeraCryptu. Tento problém lze vyřešit aktualizací jádra na verzi 2.6.24 nebo novější.</entry>
|
||||
<entry lang="cs" key="LINUX_VOL_UNMOUNTED">Svazek {0} byl odpojen.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1520,10 +1520,6 @@
|
||||
<entry lang="de" key="LINUX_MOUNTET_HINT">Das Dateisystem des gewählten Gerätes ist eingehängt. Bitte hängen Sie '{0}' aus, um fortzufahren.</entry>
|
||||
<entry lang="de" key="LINUX_HIDDEN_PASS_NO_DIFF">Das versteckte Volume darf nicht zum äußeren Volume identische Schlüsseldateien, Passwörter und PIM haben.</entry>
|
||||
<entry lang="de" key="LINUX_NOT_FAT_HINT">Bitte beachten Sie, dass das Volume nicht mit dem Dateisystem FAT formatiert wird. Deshalb kann die Installation eines Dateisystemtreibers auf anderen Plattformen als '{0}' notwendig sein, um das Volume einzuhängen.</entry>
|
||||
<entry lang="de" key="LINUX_ERROR_SIZE_HIDDEN_VOL">FEHLER: Das zu erstellende versteckte Volume ist größer als {0} TB ({1} GB).\n\nMögliche Lösungen:\n- Erstellen Sie ein Volume/eine Partition kleiner als {0} TB.\n</entry>
|
||||
<entry lang="de" key="LINUX_MAX_SIZE_HINT">- Verwenden Sie ein Laufwerk mit 4096-Byte-Sektoren, um versteckte Partitionen/Geräte mit bis zu 16 TB erstellen zu können</entry>
|
||||
<entry lang="de" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="de" key="LINUX_NOT_SUPPORTED">(wird von den vorhandenen Komponenten dieser Plattform nicht unterstützt).</entry>
|
||||
<entry lang="de" key="LINUX_KERNEL_OLD">Ihr System verwendet einen alten Linux-Kernel.\n\nWegen eines Fehlers im Linux-Kernel kann es passieren, dass Ihr System beim Schreiben auf ein VeraCrypt-Volume nicht mehr reagiert. Diese Problem kann durch einen Kernel in Version 2.6.24 oder neuer gelöst werden.</entry>
|
||||
<entry lang="de" key="LINUX_VOL_UNMOUNTED">Volume {0} ausgehängt.</entry>
|
||||
<entry lang="de" key="LINUX_VOL_MOUNTED">Volume {0} wurde eingehängt.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="es" key="LINUX_MOUNTET_HINT">El sistema de archivos del dispositivo seleccionado está actualmente montado. Por favor, desmonte '{0}' antes de continuar.</entry>
|
||||
<entry lang="es" key="LINUX_HIDDEN_PASS_NO_DIFF">El volumen oculto no puede tener la misma contraseña, PIM y archivos de clave que el volumen externo</entry>
|
||||
<entry lang="es" key="LINUX_NOT_FAT_HINT">Tenga en cuenta que el volumen no será formateado con un sistema de archivos FAT y, por lo tanto, puede ser necesario instalar controladores de sistema de archivos adicionales en plataformas distintas a {0}, lo que le permitirá montar el volumen.</entry>
|
||||
<entry lang="es" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: El volumen oculto a crear es mayor que {0} TB ({1} GB).\n\nSoluciones posibles:\n- Crear un contenedor/partición menor que {0} TB.\n</entry>
|
||||
<entry lang="es" key="LINUX_MAX_SIZE_HINT">- Utilice una unidad con sectores de 4096 bytes para crear volúmenes ocultos en particiones/dispositivos de hasta 16 TB de tamaño</entry>
|
||||
<entry lang="es" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="es" key="LINUX_NOT_SUPPORTED"> (no es compatible con los componentes disponibles en esta plataforma).\n</entry>
|
||||
<entry lang="es" key="LINUX_KERNEL_OLD">Su sistema utiliza una versión antigua del kernel de Linux.\n\nDebido a un error en el kernel de Linux, su sistema puede dejar de responder al escribir datos en un volumen de VeraCrypt. Este problema se puede resolver actualizando el kernel a la versión 2.6.24 o posterior.</entry>
|
||||
<entry lang="es" key="LINUX_VOL_UNMOUNTED">El volumen {0} ha sido desmontado.</entry>
|
||||
<entry lang="es" key="LINUX_VOL_MOUNTED">El volumen {0} ha sido montado.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="fi" key="LINUX_MOUNTET_HINT">Valitun laitteen tietojärjestelmä on jo liitetty. Poista liitos '{0}' ennen kuin jatkat.</entry>
|
||||
<entry lang="fi" key="LINUX_HIDDEN_PASS_NO_DIFF">Piilotetulla taltiolla ei voi olla sama salasana, PIM ja avaintiedostot kuin Ulommalla taltiolla.</entry>
|
||||
<entry lang="fi" key="LINUX_NOT_FAT_HINT">Ota huomioon että taltiota ei alusteta FAT-tietojärjestelmällä, tästä johtuen voit joutua asentamaan ylimääräisiä tiedostojärjestelmäajureita liittääksesi taltion muilla kuin {0} alustalla.</entry>
|
||||
<entry lang="fi" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Virhe: Luotava piilotettu taltio on suurempi kuin {0} Tt ({1} Gt).\n\nMahdollisia ratkaisuja:\n- Luo säilö/osio joka on pienempi kuin {0} Tt.\n</entry>
|
||||
<entry lang="fi" key="LINUX_MAX_SIZE_HINT">- Käytä levyä jossa on 4096 tavun sektorikoko voidaksesi luoda osio/laitepohjaisia piilotettuja taltioita 16 Tt asti.</entry>
|
||||
<entry lang="fi" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="fi" key="LINUX_NOT_SUPPORTED"> (ei ole tuettu tällä alustalla saatavilla olevilla komponenteilla).\n</entry>
|
||||
<entry lang="fi" key="LINUX_KERNEL_OLD">Järjestelmässäsi on käytössä vanha Linux-ydin.\n\nLinux-ytimessä olevan vian vuoksi järjestelmäsi voi lakata vastaamasta kirjoittaessasi dataa VeraCrypt taltioon. Tämä ongelma voidaan ratkaista päivittämällä Linux-ydin versioon 2.6.24 tai uudempaan.</entry>
|
||||
<entry lang="fi" key="LINUX_VOL_UNMOUNTED">Taltion {0} liitos on poistettu.</entry>
|
||||
<entry lang="fi" key="LINUX_VOL_MOUNTED">Taltio {0} on liitetty.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="fr" key="LINUX_MOUNTET_HINT">Le système de fichiers de l'appareil sélectionné est actuellement monté. Veuillez démonter '{0}' avant de continuer.</entry>
|
||||
<entry lang="fr" key="LINUX_HIDDEN_PASS_NO_DIFF">Le volume caché ne peut pas avoir le même mot de passe, PIM et fichiers-clés que le volume externe.</entry>
|
||||
<entry lang="fr" key="LINUX_NOT_FAT_HINT">Notez que le volume ne sera pas formaté avec un système de fichiers FAT et, par conséquent, vous pourriez devoir installer des pilotes supplémentaires sur des plateformes autres que {0} pour pouvoir monter le volume.</entry>
|
||||
<entry lang="fr" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Erreur : Le volume caché à créer est plus grand que {0} To ({1} Go).\n\nSolutions possibles :\n- Créez un conteneur ou une partition plus petit(e) que {0} To.\n</entry>
|
||||
<entry lang="fr" key="LINUX_MAX_SIZE_HINT">- Utilisez un lecteur avec des secteurs de 4096 octets pour pouvoir créer des volumes cachés jusqu'à 16 To.</entry>
|
||||
<entry lang="fr" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="fr" key="LINUX_NOT_SUPPORTED"> (non pris en charge par les composants disponibles sur cette plateforme).\n</entry>
|
||||
<entry lang="fr" key="LINUX_KERNEL_OLD">Votre système utilise une ancienne version du noyau Linux.\n\nEn raison d'un bogue dans le noyau Linux, votre système peut cesser de répondre lors de l'écriture de données sur un volume VeraCrypt. Ce problème peut être résolu en mettant à jour le noyau vers la version 2.6.24 ou ultérieure.</entry>
|
||||
<entry lang="fr" key="LINUX_VOL_UNMOUNTED">Le volume {0} a été démonté.</entry>
|
||||
<entry lang="fr" key="LINUX_VOL_MOUNTED">Le volume {0} a été monté.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="he" key="LINUX_MOUNTET_HINT">מערכת הקבצים של ההתקן שנבחר מותקנת כעת.אנא הורד את &apos;{0}&apos; לפני שתמשיך.</entry>
|
||||
<entry lang="he" key="LINUX_HIDDEN_PASS_NO_DIFF">לאמצעי האחסון הנסתר לא יכולה להיות אותה סיסמה, PIM וקובצי מפתח כמו האמצעי אחסון החיצוני</entry>
|
||||
<entry lang="he" key="LINUX_NOT_FAT_HINT">שים לב שהאמצעי אחסון לא יעוצב עם מערכת קבצים FAT ולכן ייתכן שתידרש להתקין מנהלי התקנים נוספים של מערכות קבצים בפלטפורמות שאינן {0}, שיאפשרו לך לעלות על אמצעי האחסון.</entry>
|
||||
<entry lang="he" key="LINUX_ERROR_SIZE_HIDDEN_VOL">שגיאה: האמצעי אחסון הנסתר שייווצר גדול מ- {0} TB ({1} GB). \n \n פתרונות אפשריים: \n- צור מיכל / מחיצה קטנים מ- {0} TB. \n</entry>
|
||||
<entry lang="he" key="LINUX_MAX_SIZE_HINT">- השתמש בכונן עם מגזרים של 4096 בתים כדי להיות מסוגל ליצור אמצעי אחסון מוסתרים של מחיצות / התקנים בגודל של עד 16 TB.</entry>
|
||||
<entry lang="he" key="LINUX_DOT_LF"> \n.</entry>
|
||||
<entry lang="he" key="LINUX_NOT_SUPPORTED">(לא נתמך על ידי רכיבים הזמינים בפלטפורמה זו). \n</entry>
|
||||
<entry lang="he" key="LINUX_KERNEL_OLD">המערכת שלך משתמשת בגרסה ישנה של ליבת לינוקס. \n \n בשל באג בליבת הלינוקס, המערכת שלך עשויה להפסיק להגיב בעת כתיבת נתונים לאמצעי אחסון VeraCrypt.ניתן לפתור בעיה זו על ידי שדרוג הגרעין לגרסה 2.6.24 ואילך.</entry>
|
||||
<entry lang="he" key="LINUX_VOL_UNMOUNTED">אמצעי האחסון {0} הוסר.</entry>
|
||||
<entry lang="he" key="LINUX_VOL_MOUNTED">אמצעי האחסון {0} הותקן.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="hu" key="LINUX_MOUNTET_HINT">A kiválasztott eszköz fájlrendszere jelenleg csatolva van. A folytatás előtt válassza le a(z) '{0}' eszközt.</entry>
|
||||
<entry lang="hu" key="LINUX_HIDDEN_PASS_NO_DIFF">A rejtett kötet nem rendelkezhet ugyanazzal a jelszóval, PIM-mel és kulcsfájlokkal, mint a külső kötet</entry>
|
||||
<entry lang="hu" key="LINUX_NOT_FAT_HINT">Felhívjuk figyelmét, hogy a kötet nem FAT fájlrendszerrel lesz formázva, ezért előfordulhat, hogy további fájlrendszer-illesztőprogramokat kell telepítenie a(z) {0} kívüli platformokra, amelyek lehetővé teszik a kötet csatolását.</entry>
|
||||
<entry lang="hu" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Hiba: A létrehozandó rejtett kötet nagyobb, mint {0} TB ({1} GB).\n\nLehetséges megoldások:\n- Hozzon létre egy tárolót/partíciót, amely kisebb, mint {0} TB.\n</entry>
|
||||
<entry lang="hu" key="LINUX_MAX_SIZE_HINT">- Használjon 4096 bájtos szektorokkal rendelkező meghajtót, akár 16 TB méretű partíció/eszköz által tárolt rejtett kötetek létrehozására</entry>
|
||||
<entry lang="hu" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="hu" key="LINUX_NOT_SUPPORTED"> (az aktuális platformon elérhető összetevők nem támogatják).\n</entry>
|
||||
<entry lang="hu" key="LINUX_KERNEL_OLD">Rendszere a Linux kernel régi verzióját használja.\n\nA Linux kernel hibája miatt előfordulhat, hogy rendszere nem válaszol, miközben adatokat ír egy VeraCrypt kötetre. Ez a probléma megoldható a kernel 2.6.24-es vagy újabb verziójára történő frissítésével.</entry>
|
||||
<entry lang="hu" key="LINUX_VOL_UNMOUNTED">A(z) {0} kötet le van választva.</entry>
|
||||
<entry lang="hu" key="LINUX_VOL_MOUNTED">A(z) {0} kötet csatlakoztatva lett.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="id" key="LINUX_MOUNTET_HINT">Sistem file dari perangkat yang dipilih saat ini dipasang. Silakan turun '{0}' sebelum melanjutkan.</entry>
|
||||
<entry lang="id" key="LINUX_HIDDEN_PASS_NO_DIFF">Volume Tersembunyi tidak dapat memiliki kata sandi, PIM, dan keyfile yang sama dengan volume Luar</entry>
|
||||
<entry lang="id" key="LINUX_NOT_FAT_HINT">Harap dicatat bahwa volume tidak akan diformat dengan sistem file FAT dan, oleh karena itu, Anda mungkin diminta untuk menginstal driver filesystem tambahan pada platform selain {0}, yang akan memungkinkan Anda untuk me-mount volume.</entry>
|
||||
<entry lang="id" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Kesalahan: Volume tersembunyi yang akan dibuat lebih besar dari {0} TB ({1} GB {0}).</entry>
|
||||
<entry lang="id" key="LINUX_MAX_SIZE_HINT">- Gunakan drive dengan sektor 4096-byte untuk dapat membuat volume tersembunyi partisi / perangkat-host hingga 16 TB dalam ukuran</entry>
|
||||
<entry lang="id" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="id" key="LINUX_NOT_SUPPORTED"> (tidak didukung oleh komponen yang tersedia di platform ini).</entry>
|
||||
<entry lang="id" key="LINUX_KERNEL_OLD">Sistem Anda menggunakan versi lama dari kernel Linux. Masalah ini dapat diselesaikan dengan memutakhirkan kernel ke versi 2.6.24 atau yang lebih baru.</entry>
|
||||
<entry lang="id" key="LINUX_VOL_UNMOUNTED">Volume {0} telah turun.</entry>
|
||||
<entry lang="id" key="LINUX_VOL_MOUNTED">Volume {0} telah dikaitkan.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="it" key="LINUX_MOUNTET_HINT">Il filesystem del dispositivo selezionato è attualmente montato.\nSmonta '{0}' prima di procedere.</entry>
|
||||
<entry lang="it" key="LINUX_HIDDEN_PASS_NO_DIFF">Il volume nascosto non può avere la stessa password, PIM e files di chiavi come volume esterno</entry>
|
||||
<entry lang="it" key="LINUX_NOT_FAT_HINT">Tieni presente che il volume non verrà formattato con un filesystem FAT e, pertanto, potrebbe essere necessario installare un driver del filesystem aggiuntivo in piattaforme diverse da {0}, che ti consentiranno di montare il volume.</entry>
|
||||
<entry lang="it" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Errore: il volume nascosto da creare è maggiore di {0} TB ({1} GB).\n\nSoluzioni possibili:\n- Crea un contenitore/partizione più piccolo di {0} TB.\n</entry>
|
||||
<entry lang="it" key="LINUX_MAX_SIZE_HINT">- Per poter creare volumi nascosti ospitati su partizioni/dispositivi fino ad una dimensione di 16 TB usa un'unità con settori da 4096 byte </entry>
|
||||
<entry lang="it" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="it" key="LINUX_NOT_SUPPORTED">(non supportato dai componenti disponibili su questa piattaforma).\n</entry>
|
||||
<entry lang="it" key="LINUX_KERNEL_OLD">Il sistema usa una vecchia versione del kernel Linux.\n\nA causa di un bug nel kernel Linux, il sistema potrebbe smettere di rispondere quando scrivi dati su un volume VeraCrypt.\nQuesto problema può essere risolto aggiornando il kernel alla versione 2.6.24 o successiva.</entry>
|
||||
<entry lang="it" key="LINUX_VOL_UNMOUNTED">Il volume {0} è stato smontato.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="ja" key="LINUX_MOUNTET_HINT">選択したデバイスのファイルシステムは現在マウントされています。続行する前に '{0}' をマウント解除してください。</entry>
|
||||
<entry lang="ja" key="LINUX_HIDDEN_PASS_NO_DIFF">隠しボリュームは、外部ボリュームと同じパスワード、PIM、およびキーファイルを持つことはできません。</entry>
|
||||
<entry lang="ja" key="LINUX_NOT_FAT_HINT">ボリュームは FAT ファイルシステムでフォーマットされないため、{0} 以外のプラットフォームにボリュームをマウントできるようにする追加のファイルシステムドライバーをインストールする必要がある場合があります。</entry>
|
||||
<entry lang="ja" key="LINUX_ERROR_SIZE_HIDDEN_VOL">エラー: 作成される隠しボリュームが {0} TB ({1} GB) より大きくなっています。\n\n考えられる解決策:\n- {0} TB より小さいコンテナ/パーティションを作成します。\n</entry>
|
||||
<entry lang="ja" key="LINUX_MAX_SIZE_HINT">- 最大 16 TB のサイズのパーティション/デバイスホスト型隠しボリュームを作成できるように、4096 バイトセクターのドライブを使用します</entry>
|
||||
<entry lang="ja" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="ja" key="LINUX_NOT_SUPPORTED"> （このプラットフォームで利用可能なコンポーネントではサポートされていません）。\n</entry>
|
||||
<entry lang="ja" key="LINUX_KERNEL_OLD">システムは古いバージョンの Linux カーネルを使用しています。\n\nLinux カーネルのバグにより、VeraCrypt ボリュームにデータを書き込むときにシステムが応答を停止することがあります。この問題は、カーネルをバージョン 2.6.24 以降にアップグレードすることで解決できます。</entry>
|
||||
<entry lang="ja" key="LINUX_VOL_UNMOUNTED">ボリューム {0} がマウント解除されました。</entry>
|
||||
<entry lang="ja" key="LINUX_VOL_MOUNTED">ボリューム {0} がマウントされました。</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="ko" key="LINUX_MOUNTET_HINT">선택된 장치의 파일 시스템이 현재 마운트되어 있습니다. 계속하기 전에 '{0}'을 마운트 해제하십시오.</entry>
|
||||
<entry lang="ko" key="LINUX_HIDDEN_PASS_NO_DIFF">숨겨진 볼륨은 외부 볼륨과 같은 비밀번호 혹은 PIM, 키 파일 가질 수 없습니다.The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="ko" key="LINUX_NOT_FAT_HINT">모든 볼륨이 FAT 파일시스템으로 포맷되지 않고 마운트하려는 볼륨에 대해 {0}가 아닌 다른 플랫폼에서 추가로 파일 시스템 드라이브를 설치해야 할 수도 있습니다.</entry>
|
||||
<entry lang="ko" key="LINUX_ERROR_SIZE_HIDDEN_VOL">오류: 숨겨진 볼륨은 {0} TB ({1} GB)보다 크게 만들 수 없습니다.\n\n사용가능한 해결책:\n- 컨테이너 혹은 파티션을 {0} TB보다 작게 생성하세요.\n</entry>
|
||||
<entry lang="ko" key="LINUX_MAX_SIZE_HINT">- 4096 바이트 섹터를 사용하는 드라이브는 장치에 호스트되는 숨겨진 볼륨 혹은 파티션의 크기를 최대 16 TB까지 생성할 수 있습니다.</entry>
|
||||
<entry lang="ko" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="ko" key="LINUX_NOT_SUPPORTED"> (이 플랫폼의 구성요소로는 지원되지 않습니다).\n</entry>
|
||||
<entry lang="ko" key="LINUX_KERNEL_OLD">시스템이 오래된 Linux 커널을 사용하고 있습니다.\n\nLinux 커널의 버그로 인해, VeraCrypt 볼륨으로 데이터 작성 중에 시스템이 응답을 중단할 수도 있습니다. 이 문제는 커널을 2.6.24 혹은 더 높은 버전으로 업그레이드하면 해결됩니다.</entry>
|
||||
<entry lang="ko" key="LINUX_VOL_UNMOUNTED">{0} 볼륨이 마운트 해제되었습니다.</entry>
|
||||
<entry lang="ko" key="LINUX_VOL_MOUNTED">{0} 볼륨이 마운트되었습니다.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1519,10 +1519,6 @@
|
||||
<entry lang="my" key="LINUX_MOUNTET_HINT">ရွေးချယ်ထားသော စက်၏ ဖိုင်စနစ်ကို လတ်တလော အစပျိုးထားသည်။ ကျေးဇူးပြု၍ ရှေ့မဆက်မီ '{0}' ကို အဆုံးသတ်ပါ။</entry>
|
||||
<entry lang="my" key="LINUX_HIDDEN_PASS_NO_DIFF">လျှို့ဝှက် volume သည် ပြင်ပ volume နှင့် တူညီသော စကားဝှက်၊ PIM နှင့် စကားဝှက်သော့ဖိုင်များ မရှိရပါ</entry>
|
||||
<entry lang="my" key="LINUX_NOT_FAT_HINT">volume ကို FAT ဖိုင်စနစ်နှင့် ဖောမက်ချမည်မဟုတ်သောကြောင့် သင်သည် ပလက်ဖောင်းများပေါ်တွင် {0} အပြင် ထပ်ဆောင်း ဖိုင်စနစ် ဒရိုက်ဗာများကို တပ်ဆင်ရန် လိုအပ်ပါမည်။ ယင်းက volume ကို အစပျိုးနိုင်အောင် သင့်အား ကူညီပါမည်။</entry>
|
||||
<entry lang="my" key="LINUX_ERROR_SIZE_HIDDEN_VOL">ပြဿနာ - ဖန်တီးမည့် လျှို့ဝှက် volume သည် {0} TB ({1} GB) ထက် ကြီးနေသည်။\n\nဖြေရှင်းနိုင်သော နည်းလမ်းများ -\n- {0} TB အောက်ငယ်သော ကုဒ်ထည့်သည့်ဆော့ဝဲ/အခန်းကန့်ကို ဖန်တီးပါ။\n</entry>
|
||||
<entry lang="my" key="LINUX_MAX_SIZE_HINT">- ၁၆ TB အရွယ်အစားအထိရှိသော အခန်းကန့်/စက်ပစ္စည်းတွင် လက်ခံထားရှိသည့် လျှို့ဝှက် volume များကို ဖန်တီးနိုင်ရန် ၄၀၉၆-ဘိုက် အပိုင်းများရှိသော ဒရိုက်(ဗ်)တစ်ခုကို အသုံးပြုပါ</entry>
|
||||
<entry lang="my" key="LINUX_DOT_LF">။\n</entry>
|
||||
<entry lang="my" key="LINUX_NOT_SUPPORTED">(ဤပလက်ဖောင်းတွင် ရရှိနိုင်သော အစိတ်အပိုင်းများက မပံ့ပိုးပါ)။\n</entry>
|
||||
<entry lang="my" key="LINUX_KERNEL_OLD">သင့်စနစ်သည် Linux kernel ၏ ဗားရှင်းဟောင်းကို အသုံးပြုသည်။\n\nLinux kernel ရှိ ပြဿနာတစ်ခုကြောင့် VeraCrypt volume တစ်ခုသို့ ဒေတာရေးစဉ် သင့်စနစ် ရပ်သွားနိုင်သည်။ ဤပြဿနာကို ဖြေရှင်းရန် kernel ကို ဗားရှင်း ၂.၆.၂၄ သို့မဟုတ် နောက်ပိုင်းဗားရှင်းသို့ အဆင့်မြှင့်နိုင်သည်။</entry>
|
||||
<entry lang="my" key="LINUX_VOL_UNMOUNTED">Volume {0} ကို အဆုံးသတ်လိုက်ပါပြီ။</entry>
|
||||
<entry lang="my" key="LINUX_VOL_MOUNTED">Volume {0} ကို အစပျိုးလိုက်ပါပြီ။</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="nb" key="LINUX_MOUNTET_HINT">Filsystemet til den valgte enheten er for øyeblikket montert. Vennligst demonter '{0}' før du fortsetter.</entry>
|
||||
<entry lang="nb" key="LINUX_HIDDEN_PASS_NO_DIFF">Det skjulte volumet kan ikke ha samme passord, PIM og nøkkelfiler som det ytre volumet</entry>
|
||||
<entry lang="nb" key="LINUX_NOT_FAT_HINT">Vennligst merk at volumet ikke vil bli formatert med et FAT-filsystem og derfor kan du bli nødt til å installere tillegg av filsystemdrivere på plattformer andre enn {0}, som vil gjøre det mulig for deg å montere volumet.</entry>
|
||||
<entry lang="nb" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Feil: Det skjulte volumet som skal opprettes er større enn {0} TB ({1} GB).\n\nMulige løsninger:\n- Opprett en beholder/partisjon mindre enn {0} TB.\n</entry>
|
||||
<entry lang="nb" key="LINUX_MAX_SIZE_HINT">- Bruk en disk med 4096-bytes sektorer for å kunne opprette partisjon/device-hosted skjulte volumer opptil 16 TB i størrelse</entry>
|
||||
<entry lang="nb" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="nb" key="LINUX_NOT_SUPPORTED"> (ikke støttet av komponenter tilgjengelig på denne plattformen).\n</entry>
|
||||
<entry lang="nb" key="LINUX_KERNEL_OLD">Systemet ditt bruker en gammel versjon av Linux-kjernen.\n\nPå grunn av en feil i Linux-kjernen kan systemet ditt slutte å svare når du skriver data til et VeraCrypt-volum. Dette problemet kan løses ved å oppgradere kjernen til versjon 2.6.24 eller senere.</entry>
|
||||
<entry lang="nb" key="LINUX_VOL_UNMOUNTED">Volum {0} har blitt demontert.</entry>
|
||||
<entry lang="nb" key="LINUX_VOL_MOUNTED">Volum {0} har blitt montert.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="nl" key="LINUX_MOUNTET_HINT">Het bestandssysteem van het geselecteerde apparaat is momenteel gekoppeld. Ontkoppel '{0}' voordat u verder gaat.</entry>
|
||||
<entry lang="nl" key="LINUX_HIDDEN_PASS_NO_DIFF">Het verborgen volume kan niet hetzelfde wachtwoord, PIM en sleutelbestanden hebben als het buitenste volume.</entry>
|
||||
<entry lang="nl" key="LINUX_NOT_FAT_HINT">Merk op dat het volume niet geformatteerd zal worden met een FAT-bestandssysteem. Daarom kan het zijn dat u bijkomende bestandssysteem-stuurprogramma's moet installeren op andere platformen dan {0}, wat u zal toelaten om het volume te koppelen.</entry>
|
||||
<entry lang="nl" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Fout: het aan te maken verborgen volume is groter dan {0} TB ({1} GB).\n\nMogelijke oplossingen:\n- Een container/partitie kleiner dan {0} TB aanmaken.\n</entry>
|
||||
<entry lang="nl" key="LINUX_MAX_SIZE_HINT">- Een schijf met sectoren van 4096 bytes gebruiken om partitie/apparaat-gehoste verborgen volumes tot 16 TB te kunnen aanmaken.</entry>
|
||||
<entry lang="nl" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="nl" key="LINUX_NOT_SUPPORTED"> (niet ondersteund door onderdelen beschikbaar op dit platform).\n</entry>
|
||||
<entry lang="nl" key="LINUX_KERNEL_OLD">Uw systeem gebruikt een oude versie van de Linux-kernel.\n\nDoor een bug in de Linux-kernel kan uw systeem stoppen met reageren bij het schrijven van gegevens naar een VeraCrypt-volume. Dit probleem kan worden opgelost door de kernel te upgraden naar versie 2.6.24 of later.</entry>
|
||||
<entry lang="nl" key="LINUX_VOL_UNMOUNTED">Volume {0} is ontkoppeld.</entry>
|
||||
<entry lang="nl" key="LINUX_VOL_MOUNTED">Volume {0} is gekoppeld.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="pl" key="LINUX_MOUNTET_HINT">System plików wybranego urządzenia jest aktualnie podłączony. Odłącz '{0}' przed kontynuowaniem.</entry>
|
||||
<entry lang="pl" key="LINUX_HIDDEN_PASS_NO_DIFF">Wolumen ukryty nie może mieć tego samego hasła, pliku PIM i plików-kluczy, co wolumen zewnętrzny</entry>
|
||||
<entry lang="pl" key="LINUX_NOT_FAT_HINT">Zwróć uwagę, że wolumen nie zostanie sformatowany w systemie plików FAT i dlatego może być konieczne zainstalowanie dodatkowych sterowników systemu plików na platformach innych niż '{0}', co umożliwi podłączenie wolumenu.</entry>
|
||||
<entry lang="pl" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Błąd: Ukryty wolumen do utworzenia jest większy niż {0} TB ({1} GB).\n\nMożliwe rozwiązania:\n- Utwórz kontener/partycję mniejszą niż {0} TB.\n</entry>
|
||||
<entry lang="pl" key="LINUX_MAX_SIZE_HINT">- Użyj dysku z sektorami o rozmiarze 4096 bajtów, aby móc tworzyć ukryte wolumeny oparte na partycji/urządzeniu o rozmiarze do 16 TB</entry>
|
||||
<entry lang="pl" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="pl" key="LINUX_NOT_SUPPORTED"> (nieobsługiwane przez komponenty dostępne na tej platformie).\n</entry>
|
||||
<entry lang="pl" key="LINUX_KERNEL_OLD">Twój system używa starej wersji jądra Linuksa.\n\nZ powodu błędu w jądrze Linuksa Twój system może przestać odpowiadać podczas zapisywania danych do wolumenu VeraCrypt. Ten problem można rozwiązać, aktualizując jądro do wersji 2.6.24 lub nowszej.</entry>
|
||||
<entry lang="pl" key="LINUX_VOL_UNMOUNTED">Wolumen {0} został odłączony.</entry>
|
||||
<entry lang="pl" key="LINUX_VOL_MOUNTED">Wolumen {0} został podłączony.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="pt-br" key="LINUX_MOUNTET_HINT">O sistema de arquivos do dispositivo selecionado está atualmente montado. Por favor, desmonte '{0}' antes de continuar.</entry>
|
||||
<entry lang="pt-br" key="LINUX_HIDDEN_PASS_NO_DIFF">O volume oculto não pode ter a mesma senha, PIM e arquivos-chave que o volume externo.</entry>
|
||||
<entry lang="pt-br" key="LINUX_NOT_FAT_HINT">Por favor, observe que o volume não será formatado com um sistema de arquivos FAT e, portanto, pode ser necessário instalar drivers adicionais do sistema de arquivos em plataformas diferentes de {0}, os quais permitirão montar o volume.</entry>
|
||||
<entry lang="pt-br" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Erro: O volume oculto a ser criado é maior que {0} TB ({1} GB).\n\nSoluções possíveis:\n- Crie um contêiner/partição menor que {0} TB.\n</entry>
|
||||
<entry lang="pt-br" key="LINUX_MAX_SIZE_HINT">- Use uma unidade com setores de 4096 bytes para poder criar volumes ocultos baseados em partição/dispositivo de até 16 TB.</entry>
|
||||
<entry lang="pt-br" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="pt-br" key="LINUX_NOT_SUPPORTED"> (não suportado pelos componentes disponíveis nesta plataforma).\n</entry>
|
||||
<entry lang="pt-br" key="LINUX_KERNEL_OLD">Seu sistema usa uma versão antiga do kernel Linux.\n\nDevido a um erro no kernel Linux, seu sistema pode parar de responder ao gravar dados em um volume VeraCrypt. Esse problema pode ser resolvido atualizando o kernel para a versão 2.6.24 ou posterior.</entry>
|
||||
<entry lang="pt-br" key="LINUX_VOL_UNMOUNTED">O volume {0} foi desmontado.</entry>
|
||||
<entry lang="pt-br" key="LINUX_VOL_MOUNTED">O volume {0} foi montado.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="ro" key="LINUX_MOUNTET_HINT">Sistemul de fișiere al dispozitivului selectat este montat acum. Demontați „{0}” înainte de a continua.</entry>
|
||||
<entry lang="ro" key="LINUX_HIDDEN_PASS_NO_DIFF">Volumul ascuns nu poate avea aceeași parolă, MIP și fișiere-cheie ca și volumul exterior.</entry>
|
||||
<entry lang="ro" key="LINUX_NOT_FAT_HINT">Volumul nu va fi formatat cu un sistem de fișiere FAT și, prin urmare, vi se poate solicita să instalați drivere suplimentare pe alte platforme decât {0}, care vă vor permite să montați volumul.</entry>
|
||||
<entry lang="ro" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Eroare: volumul ascuns care trebuie creat este mai mare de {0} TiB ({1} GiB).\n\nSoluții posibile:\n- Creați un container/partiție mai mică de {0} TiB.\n</entry>
|
||||
<entry lang="ro" key="LINUX_MAX_SIZE_HINT">- Utilizați o unitate cu sectoare de 4096 de baiți pentru a putea crea volume ascunse de partiții/dispozitive găzduite de până la 16 TiB.</entry>
|
||||
<entry lang="ro" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="ro" key="LINUX_NOT_SUPPORTED"> (nesuportat de componentele disponibile pe această platformă).\n</entry>
|
||||
<entry lang="ro" key="LINUX_KERNEL_OLD">Sistemul folosește o versiune veche a nucleului Linux.\n\nDin cauza unei erori în nucleul Linux, este posibil ca sistemul să nu mai răspundă atunci când scrieți date pe un volum VeraCrypt. Această problemă poate fi rezolvată prin actualizarea nucleului la versiunea 2.6.24 sau o versiune ulterioară.</entry>
|
||||
<entry lang="ro" key="LINUX_VOL_UNMOUNTED">Volumul {0} a fost demontat.</entry>
|
||||
<entry lang="ro" key="LINUX_VOL_MOUNTED">Volumul {0} a fost montat.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="ru" key="LINUX_MOUNTET_HINT">Файловая система выбранного устройства сейчас смонтирована. Прежде чем продолжить, размонтируйте '{0}'.</entry>
|
||||
<entry lang="ru" key="LINUX_HIDDEN_PASS_NO_DIFF">У скрытого тома не может быть тех же пароля, PIM и ключевых файлов, как у внешнего тома</entry>
|
||||
<entry lang="ru" key="LINUX_NOT_FAT_HINT">Учтите, что том не будет отформатирован с файловой системой FAT, поэтому для монтирования этого тома на платформах, отличных от {0}, может потребоваться установить дополнительные драйверы файловой системы.</entry>
|
||||
<entry lang="ru" key="LINUX_ERROR_SIZE_HIDDEN_VOL">ОШИБКА: Создаваемый скрытый том больше {0} ТиБ ({1} ГиБ).\n\nВозможные решения:\n- Создайте контейнер/раздел размером менее {0} ТиБ.\n</entry>
|
||||
<entry lang="ru" key="LINUX_MAX_SIZE_HINT">- Используйте диск с 4096-байтовыми секторами, чтобы можно было создавать на разделах/ устройствах скрытые тома размером до 16 ТиБ</entry>
|
||||
<entry lang="ru" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="ru" key="LINUX_NOT_SUPPORTED"> (не поддерживается компонентами, доступными на этой платформе).\n</entry>
|
||||
<entry lang="ru" key="LINUX_KERNEL_OLD">Ваша система использует старую версию ядра Linux.\n\nИз-за ошибки в ядре Linux система может перестать отвечать на запросы при записи данных на том VeraCrypt. Эта проблема решается обновлением ядра до версии 2.6.24 или более новой.</entry>
|
||||
<entry lang="ru" key="LINUX_VOL_UNMOUNTED">Том {0} размонтирован.</entry>
|
||||
<entry lang="ru" key="LINUX_VOL_MOUNTED">Том {0} смонтирован.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="sl" key="LINUX_MOUNTET_HINT">Datotečni sistem izbrane naprave je trenutno nameščen. Preden nadaljuješ, odklopi '{0}'.</entry>
|
||||
<entry lang="sl" key="LINUX_HIDDEN_PASS_NO_DIFF">Skriti nosilec ne more imeti enakega gesla, PIM-a in ključnih datotek kot zunanji nosilec</entry>
|
||||
<entry lang="sl" key="LINUX_NOT_FAT_HINT">Upoštevaj, da nosilec ne bo formatiran z datotečnim sistemom FAT, zato boš morda moral namestiti dodatne gonilnike datotečnega sistema na platformah, ki niso {0}, kar ti bo omogočilo namestitev nosilca.</entry>
|
||||
<entry lang="sl" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Napaka: skriti nosilec, ki ga želiš ustvariti, je večji od {0} TB ({1} GB).\n\nMožne rešitve:\n- Ustvari vsebnik/particijo, manjšo od {0} TB.\n</entry>
|
||||
<entry lang="sl" key="LINUX_MAX_SIZE_HINT">- Uporabi pogon s 4096-bajtnimi sektorji, da lahko ustvariš skrite nosilce, ki gostujejo na particiji/napravi, do velikosti 16 TB</entry>
|
||||
<entry lang="sl" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="sl" key="LINUX_NOT_SUPPORTED"> (ni podprto s komponentami, ki so na voljo na tej platformi).\n</entry>
|
||||
<entry lang="sl" key="LINUX_KERNEL_OLD">Tvoj sistem uporablja staro različico jedra Linuxa.\n\nZaradi napake v jedru Linuxa se tvoj sistem morda neha odzivati pri zapisovanju podatkov na nosilec VeraCrypt. To težavo je mogoče rešiti z nadgradnjo jedra na različico 2.6.24 ali novejšo.</entry>
|
||||
<entry lang="sl" key="LINUX_VOL_UNMOUNTED">Nosilec {0} je odklopljen.</entry>
|
||||
<entry lang="sl" key="LINUX_VOL_MOUNTED">Nosilec {0} je priklopljen.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="sv" key="LINUX_MOUNTET_HINT">Filsystemet för den valda enheten är för närvarande monterat. Demontera "{0}" innan du fortsätter.</entry>
|
||||
<entry lang="sv" key="LINUX_HIDDEN_PASS_NO_DIFF">Den dolda volymen kan inte ha samma lösenord, PIM och nyckelfiler som den yttre volymen</entry>
|
||||
<entry lang="sv" key="LINUX_NOT_FAT_HINT">Observera att volymen inte kommer att formateras med ett FAT-filsystem och därför kan du behöva installera ytterligare filsystemdrivrutiner på andra plattformar än {0}, vilket gör att du kan montera volymen.</entry>
|
||||
<entry lang="sv" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Fel: Den dolda volymen som ska skapas är större än {0} TB ({1} GB).\n\nMöjliga lösningar:\n- Skapa en behållare/partition som är mindre än {0} TB.\n</entry>
|
||||
<entry lang="sv" key="LINUX_MAX_SIZE_HINT">- Använd en enhet med 4096-byte sektorer för att kunna skapa partitions-/enhetsvärdade dolda volymer upp till 16 TB i storlek</entry>
|
||||
<entry lang="sv" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="sv" key="LINUX_NOT_SUPPORTED"> (stöds inte av komponenter tillgängliga på den här plattformen).\n</entry>
|
||||
<entry lang="sv" key="LINUX_KERNEL_OLD">Ditt system använder en gammal version av Linux-kärnan.\n\nPå grund av ett fel i Linux-kärnan kan ditt system sluta svara när du skriver data till en VeraCrypt-volym. Detta problem kan lösas genom att uppgradera kärnan till version 2.6.24 eller senare.</entry>
|
||||
<entry lang="sv" key="LINUX_VOL_UNMOUNTED">Volymen {0} har demonterats.</entry>
|
||||
<entry lang="sv" key="LINUX_VOL_MOUNTED">Volymen {0} har monterats.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="th" key="LINUX_MOUNTET_HINT">ระบบไฟล์ของอุปกรณ์ที่เลือกถูกติดตั้งอยู่ในปัจจุบัน กรุณาถอดติดตั้ง '{0}' ก่อนดำเนินการต่อ.</entry>
|
||||
<entry lang="th" key="LINUX_HIDDEN_PASS_NO_DIFF">ปริมาณที่ซ่อนไม่สามารถมีรหัสผ่าน, PIM และคีย์ไฟล์เดียวกันกับปริมาณภายนอก</entry>
|
||||
<entry lang="th" key="LINUX_NOT_FAT_HINT">โปรดทราบว่าปริมาณจะไม่ได้ถูกฟอร์แมทด้วยระบบไฟล์ FAT และ, ดังนั้น, คุณอาจจะต้องติดตั้งไดรเวอร์ระบบไฟล์เพิ่มเติมบนแพลตฟอร์มอื่นเพื่อให้สามารถติดตั้งปริมาณได้.</entry>
|
||||
<entry lang="th" key="LINUX_ERROR_SIZE_HIDDEN_VOL">ข้อผิดพลาด: ปริมาณที่ซ่อนที่กำลังจะถูกสร้างมีขนาดใหญ่กว่า {0} TB ({1} GB).\n\nวิธีแก้ปัญหาที่เป็นไปได้:\n- สร้างตัวเก็บ/พาร์ติชันที่มีขนาดเล็กกว่า {0} TB.\n</entry>
|
||||
<entry lang="th" key="LINUX_MAX_SIZE_HINT">- ใช้ไดรฟ์ที่มีเซ็กเตอร์ขนาด 4096-ไบต์เพื่อให้สามารถสร้างพาร์ติชัน/อุปกรณ์ที่มีปริมาณที่ซ่อนได้ถึง 16 TB</entry>
|
||||
<entry lang="th" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="th" key="LINUX_NOT_SUPPORTED"> (ไม่รองรับโดยส่วนประกอบที่มีอยู่ในแพลตฟอร์มนี้).\n</entry>
|
||||
<entry lang="th" key="LINUX_KERNEL_OLD">ระบบของคุณใช้เวอร์ชันเก่าของเคอร์เนล Linux.\n\nเนื่องจากบั๊กในเคอร์เนล Linux, ระบบของคุณอาจหยุดตอบสนองเมื่อเขียนข้อมูลไปยังปริมาณ VeraCrypt. ปัญหานี้สามารถแก้ได้โดยการอัปเกรดเคอร์เนลเป็นเวอร์ชัน 2.6.24 หรือใหม่กว่า.</entry>
|
||||
<entry lang="th" key="LINUX_VOL_UNMOUNTED">ปริมาณ {0} ถูกถอดติดตั้งแล้ว.</entry>
|
||||
<entry lang="th" key="LINUX_VOL_MOUNTED">ปริมาณ {0} ถูกติดตั้งแล้ว.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="tr" key="LINUX_MOUNTET_HINT">Seçilmiş aygıtın dosya sistemi şu anda bağlı. İlerlemeden önce lütfen '{0}' bağlantısını kesin.</entry>
|
||||
<entry lang="tr" key="LINUX_HIDDEN_PASS_NO_DIFF">Gizli birim, dış birim ile aynı parolaya KÇÇ değerine ve anahtar dosyalarına sahip olamaz</entry>
|
||||
<entry lang="tr" key="LINUX_NOT_FAT_HINT">Birimin bir FAT dosya sistemiyle biçimlendirilmeyeceğini ve bu nedenle, {0} dışındaki platformlara birimi bağlayabilmeniz için ek dosya sistemi sürücüleri kurmanız gerekebileceğini lütfen unutmayın.</entry>
|
||||
<entry lang="tr" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Hata: Oluşturulacak gizli birim {0} TB değerinden büyük ({1} GB).\n\nOlası çözümler:\n- {0} TB boyutundan küçük bir kapsayıcı ya da bölüm oluşturun.\n</entry>
|
||||
<entry lang="tr" key="LINUX_MAX_SIZE_HINT">- 16 TB boyutuna kadar bölüm ya da aygıt üzerinde barındırılan gizli birimler oluşturabilmek için 4096 baytlık kesimleri olan bir sürücü kullanın</entry>
|
||||
<entry lang="tr" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="tr" key="LINUX_NOT_SUPPORTED">(bu platformda bulunan bileşenler tarafından desteklenmiyor).\n</entry>
|
||||
<entry lang="tr" key="LINUX_KERNEL_OLD">Sisteminiz Linux çekirdeğinin eski bir sürümünü kullanıyor.\n\nLinux çekirdeğindeki bir sorun nedeniyle sisteminiz VeraCrypt birimine veri yazarken yanıt vermeyebilir. Bu sorun, çekirdeği 2.6.24 ya da üzerindeki bir sürüme yükselterek çözülebilir.</entry>
|
||||
<entry lang="tr" key="LINUX_VOL_UNMOUNTED">{0} biriminin bağlantısı kesildi.</entry>
|
||||
<entry lang="tr" key="LINUX_VOL_MOUNTED">{0} birimi bağlandı.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="uk" key="LINUX_MOUNTET_HINT">Файлова система вибраного пристрою наразі змонтована. Будь ласка, відмонтируйте '{0}' перед продовженням.</entry>
|
||||
<entry lang="uk" key="LINUX_HIDDEN_PASS_NO_DIFF">Прихований том не може мати однаковий пароль, PIM і ключові файли, як зовнішній том</entry>
|
||||
<entry lang="uk" key="LINUX_NOT_FAT_HINT">Будь ласка, зверніть увагу, що том не буде відформатовано файловою системою FAT, і тому вам може знадобитися встановити додаткові драйвери файлової системи на інших платформах, окрім {0}, що дозволить вам монтувати том.</entry>
|
||||
<entry lang="uk" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Помилка: прихований том, який буде створено, більший за {0} ТБ ({1} ГБ).\n\nМожливі рішення:\n- Створити контейнер/розділ, менший за {0} ТБ.\n</entry>
|
||||
<entry lang="uk" key="LINUX_MAX_SIZE_HINT">- Використовуйте накопичувач із 4096-байтовими секторами, щоб створити розділи/пристрої, що розміщують приховані томи, розміром до 16 ТБ </entry>
|
||||
<entry lang="uk" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="uk" key="LINUX_NOT_SUPPORTED"> (не підтримується компонентами, доступними на цій платформі).\n</entry>
|
||||
<entry lang="uk" key="LINUX_KERNEL_OLD">Ваша система використовує стару версію ядра Linux.\n\nЧерез помилку в ядрі Linux ваша система може перестати відповідати під час запису даних на томи VeraCrypt. Цю проблему можна вирішити, оновивши ядро до версії 2.6.24 або новішої.</entry>
|
||||
<entry lang="uk" key="LINUX_VOL_UNMOUNTED">Том {0} було відмонтовано.</entry>
|
||||
<entry lang="uk" key="LINUX_VOL_MOUNTED">Том {0} було змонтовано.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
@@ -1518,10 +1518,6 @@
|
||||
<entry lang="zh-cn" key="LINUX_MOUNTET_HINT">所选设备的文件系统当前已挂载。在继续之前请卸载'{0}'。</entry>
|
||||
<entry lang="zh-cn" key="LINUX_HIDDEN_PASS_NO_DIFF">隐藏卷不能与外部卷有相同的密码、PIM和密钥文件</entry>
|
||||
<entry lang="zh-cn" key="LINUX_NOT_FAT_HINT">请注意，该卷将不会被格式化为FAT文件系统，因此，您可能需要在{0}以外的平台上安装额外的文件系统驱动程序，这将使您能够挂载该卷。</entry>
|
||||
<entry lang="zh-cn" key="LINUX_ERROR_SIZE_HIDDEN_VOL">错误：要创建的隐藏卷大于 {0} TB ({1} GB)。\n\n可能的解决方式：\n- 创建一个小于 {0} TB的容器/分区。\n</entry>
|
||||
<entry lang="zh-cn" key="LINUX_MAX_SIZE_HINT">- 使用具有4096字节扇区的驱动器，能够创建分区/设备托管的隐藏卷尺寸可达 16 TB</entry>
|
||||
<entry lang="zh-cn" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="zh-cn" key="LINUX_NOT_SUPPORTED"> (此平台上可用的组件不支持)。\n</entry>
|
||||
<entry lang="zh-cn" key="LINUX_KERNEL_OLD">您的系统使用的是旧版本Linux内核。\n\n由于Linux内核中的错误，在将数据写入VeraCrypt卷时，系统可能会停止响应。这个问题可以通过将内核升级到2.6.24或更高版本来解决。</entry>
|
||||
<entry lang="zh-cn" key="LINUX_VOL_UNMOUNTED">卷{0}已卸载。</entry>
|
||||
<entry lang="zh-cn" key="LINUX_VOL_MOUNTED">卷{0}已装载。</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="zh-hk" key="LINUX_MOUNTET_HINT">所選擇的裝置上的檔案系統已經掛載。在繼續前請先解除掛載 '{0}' 。</entry>
|
||||
<entry lang="zh-hk" key="LINUX_HIDDEN_PASS_NO_DIFF">隱藏加密區與外層加密區不可以使用相同的密碼，PIM 及加密鑰檔案</entry>
|
||||
<entry lang="zh-hk" key="LINUX_NOT_FAT_HINT">請注意這個加密區將不會格式化為 FAT 檔案系統以及因此，你可能需要在平台上安裝除 {0} 以外的額外檔案系統驅動程式，使你能夠掛載這個加密區。</entry>
|
||||
<entry lang="zh-hk" key="LINUX_ERROR_SIZE_HIDDEN_VOL">錯誤：將會建立的隱藏加密區大小超過 {0} TB ({1} GB)。可行的解決方案：\n- 建立一個大小少於 {0} TB 的加密容器檔案或分割區。\n</entry>
|
||||
<entry lang="zh-hk" key="LINUX_MAX_SIZE_HINT">- 使用一個磁碟區大小為 4096 位元組的磁碟機能夠建立最大為 16 TB 寄存在分割區或檔案的隱藏加密區</entry>
|
||||
<entry lang="zh-hk" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="zh-hk" key="LINUX_NOT_SUPPORTED"> (這個平台上可用的元件未能支援)。\n</entry>
|
||||
<entry lang="zh-hk" key="LINUX_KERNEL_OLD">你的系統正在使用一個舊版本的 Linux 核心。\n\n由於 Linux 核心的一個錯誤，你的系統可能會在寫入數據到 VeraCrypt 加密區時停止回應。這個問題可以透過將核心升級到 2.6.24 或更新的版本來解決。</entry>
|
||||
<entry lang="zh-hk" key="LINUX_VOL_UNMOUNTED">加密區 {0} 已經解除掛載。</entry>
|
||||
<entry lang="zh-hk" key="LINUX_VOL_MOUNTED">加密區 {0} 已經掛載。</entry>
|
||||
|
||||
@@ -1517,10 +1517,6 @@
|
||||
<entry lang="en" key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please unmount '{0}' before proceeding.</entry>
|
||||
<entry lang="en" key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
|
||||
<entry lang="en" key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
|
||||
<entry lang="en" key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
|
||||
<entry lang="en" key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
|
||||
<entry lang="en" key="LINUX_DOT_LF">.\n</entry>
|
||||
<entry lang="en" key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_UNMOUNTED">Volume {0} has been unmounted.</entry>
|
||||
<entry lang="en" key="LINUX_VOL_MOUNTED">Volume {0} has been mounted.</entry>
|
||||
|
||||
Reference in New Issue
Block a user