mirror of
https://github.com/veracrypt/VeraCrypt.git
synced 2026-05-21 21:30:48 -05:00
Linux: refine in-kernel NTFS driver selection
Keep the NTFS kernel-driver option as a generic in-kernel NTFS path rather than an ntfs3-specific path. Add --filesystem=kernel-ntfs and -m kernelntfs routes that select a registered or loadable kernel NTFS driver and mount with -i so mount.ntfs/ntfs-3g helpers are not invoked. Preserve --filesystem=ntfs3 as a literal pin to the ntfs3 driver. Treat both ntfs3 and kernel-ntfs as mount-only selectors; volume creation continues to use filesystem type NTFS. The preference and -m kernelntfs path only select an in-kernel NTFS driver when no explicit filesystem type was supplied and blkid detects NTFS. Treat ntfs as the preferred in-kernel driver on Linux 7.1 and later, where the upstream read/write driver is expected. On earlier kernels, select ntfs only when module metadata identifies the standalone read/write driver and /sys/module confirms it loaded, avoiding ntfs3 read-only ntfs compatibility registrations. Fall back to ntfs3 otherwise, and report a generic kernel-driver error if neither supported driver is available or loadable. Rename the internal preference/config field to MountNtfsWithKernelDriver, migrate the old MountNtfsWithNtfs3 preference key, and update UI strings, CLI help, documentation, release notes, and translation placeholders accordingly. Reference: https://github.com/veracrypt/VeraCrypt/issues/1735
This commit is contained in:
Mounir IDRASSI
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1689,8 +1689,9 @@ Information about Corsican localization:
|
||||
<entry lang="co" key="PIM_ARGON2_LARGE_WARNING">Avete sceltu un valore PIM Argon2 chì hè più maiò chè u valore predefinitu di VeraCrypt.\nSappiate chì què pò richiede più memoria è aumenterà a durata di muntatura.</entry>
|
||||
<entry lang="co" key="PIM_ARGON2_SMALL_WARNING">Avete sceltu un valore PIM Argon2 più chjucu chè u valore predefinitu di VeraCrypt. Sappiate chì, s’è a vostra parolla d’intesa ùn hè abbastanza forta, què pò riduce u livellu di sicurità.\n\nCunfirmate chì vò impiegate una parolla d’intesa forta ?</entry>
|
||||
<entry lang="co" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">A parolla d’intesa deve cuntene omancu 20 caratteri per pudè impiegà u valore PIM Argon2 specificatu.\nE parolle d’intesa più corte ponu solu esse impiegate s’è u PIM Argon2 hè uguale à 12 o superiore.</entry>
|
||||
<entry lang="co" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Muntà i vulumi NTFS cù u pilotu ntfs3 di u nocciulu Linux</entry>
|
||||
<entry lang="co" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Solu Linux. Quandu st’ozzione hè attivata, VeraCrypt esamineghja l’apparechju virtuale dicifratu cù « blkid -p » è munta i sistemi di schedarii NTFS scuperti cù ntfs3 invece di u terminale NTFS predefinitu. S’è a scuperta NTFS ùn riesce, VeraCrypt impiegheghja a selezzione autumatica nurmale di sistema di schedarii. S’è ntfs3 hè indispunibule, o bluccatu da a distribuzione, a muntatura pò fiascà. St’ozzione d’accettazione pò evità i blucchime d’interruzzione o d’invernazione cagiunati da sistemi di schedarii FUSE cù spaziu d’utilizatore senza risposta.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="co" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Fiascu di a smuntatura nurmale di u vulume {0}. Què pò accade quandu qualchì appiecazione hà sempre schedarii o cartulari aperti nant’à u vulume, o quandu l’apparechju di salvaguardia hè statu discunnessu è chì a muntatura hè diventata instabile.\n\nS’è l’apparechju hè sempre cunnessu, sceglie Nò, chjode l’appiecazioni chì impieganu u vulume è pruvà torna à smuntallu.\n\nS’è l’apparechju hè statu discunnessu o s’è a muntatura hè instabile, VeraCrypt pò fà un tentativu di nettata d’urgenza stacchendu u sistema di schedarii di manera attimpata è cacciendu - o pianificà a cacciatura di - l’oggetti di u nocciulu VeraCrypt. E scritture in attesa ponu esse fiascate, i dati ponu esse persi, è a nettata pò stà in attesa fin’à ciò chì l’appiecazioni chjodinu i schedarii aperti. Verificà u sistema di schedarii cù « fsck » o cù l’attrezzu di riparazione adequatu prima d’impiegallu torna.\n\nCuntinuà ?</entry>
|
||||
<entry lang="co" key="LINUX_EMERGENCY_UNMOUNTED">A nettata d’urgenza per u vulume {0} hè stata lanciata. S’è u vulume hè statu discunnessu, o a muntatura era instabile, o ancu ci era scritture in attesa, verificà u sistema di schedarii cù « fsck » o cù l’attrezzu di riparazione adequatu prima d’impiegallu torna.</entry>
|
||||
<entry lang="co" key="FORMAT_STAGE_WRITING_DATA">Creazione di i dati di u vulume. Aspittate per piacè.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1671,8 +1671,9 @@
|
||||
<entry lang="de" key="PIM_ARGON2_LARGE_WARNING">Sie haben einen Argon2-PIM-Wert gewählt, der größer ist als der Standardwert von VeraCrypt.\nBitte beachten Sie, dass dies mehr Arbeitsspeicher erfordern und zu einer deutlich langsameren Einbindung führen kann.</entry>
|
||||
<entry lang="de" key="PIM_ARGON2_SMALL_WARNING">Sie haben einen Argon2-PIM-Wert gewählt, der kleiner als der Standardwert von VeraCrypt ist. Bitte beachten Sie, dass ein zu schwaches Passwort die Sicherheit beeinträchtigen kann.\n\nBestätigen Sie, dass Sie ein sicheres Passwort verwenden?</entry>
|
||||
<entry lang="de" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Das Passwort muss mindestens 20 Zeichen lang sein, damit der angegebene Argon2-PIM verwendet werden kann.\nKürzere Passwörter können nur verwendet werden, wenn der Argon2-PIM-Wert 12 oder größer ist.</entry>
|
||||
<entry lang="de" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">NTFS-Volumes mit dem NTFS3-Treiber des Linux-Kernels einbinden</entry>
|
||||
<entry lang="de" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Nur Linux. Wenn diese Option aktiviert ist, überprüft VeraCrypt das entschlüsselte virtuelle Gerät mit 'blkid -p' und hängt erkannte NTFS-Dateisysteme mit 'ntfs3' anstelle des standardmäßigen NTFS-Backends ein. Wenn die NTFS-Erkennung fehlschlägt, verwendet VeraCrypt die normale automatische Dateisystemauswahl. Wenn 'ntfs3' nicht verfügbar ist oder von der Distribution blockiert wird, kann das Einbinden fehlschlagen. Diese Opt-in-Option kann Hänger beim Suspendieren oder im Ruhezustand vermeiden, die durch eingefrorene FUSE-Dateisysteme im Benutzerbereich verursacht werden.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="de" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Das normale Aushängen des Volumes {0} ist fehlgeschlagen. Dies kann passieren, wenn Anwendungen noch Dateien oder Verzeichnisse auf dem Volume geöffnet haben oder wenn das zugrunde liegende Gerät getrennt wurde und die Einbindung veraltet ist.\n\nWenn das Gerät noch angeschlossen ist, wählen Sie „Nein“, schließen Sie die Anwendungen, die das Volume verwenden, und versuchen Sie erneut, das Volume auszuhängen.\n\nWenn das Gerät getrennt wurde oder die Einbindung veraltet ist, kann VeraCrypt eine Notfallbereinigung versuchen, indem es das Dateisystem verzögert trennt und VeraCrypt-Kernelobjekte entfernt oder deren Entfernung plant. Ausstehende Schreibvorgänge sind möglicherweise fehlgeschlagen, Daten können verloren gegangen sein, und die Bereinigung bleibt möglicherweise ausstehend, bis Anwendungen geöffnete Dateien schließen. Überprüfen Sie das Dateisystem mit 'fsck' oder dem entsprechenden Reparaturtool, bevor Sie es wieder verwenden.\n\nWeiter?</entry>
|
||||
<entry lang="de" key="LINUX_EMERGENCY_UNMOUNTED">Die Notfallbereinigung für das Volume {0} wurde gestartet. Falls das Volume getrennt wurde, die Einbindung veraltet war oder Schreibvorgänge ausstehend waren, überprüfen Sie das Dateisystem mit 'fsck' oder dem entsprechenden Reparaturtool, bevor Sie es erneut verwenden.</entry>
|
||||
<entry lang="de" key="FORMAT_STAGE_WRITING_DATA">Volumendaten werden erstellt. Bitte warten.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1670,8 +1670,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="nb" key="PIM_ARGON2_LARGE_WARNING">Du har valgt en Argon2 PIM-verdi som er større enn VeraCrypts standardverdi.\nVær oppmerksom på at dette kan kreve mer minne og føre til mye tregere montering.</entry>
|
||||
<entry lang="nb" key="PIM_ARGON2_SMALL_WARNING">Du har valgt en Argon2 PIM-verdi som er mindre enn VeraCrypts standardverdi. Vær oppmerksom på at dersom passordet ditt ikke er sterkt nok, kan dette føre til svakere sikkerhet.\n\nBekrefter du at du bruker et sterkt passord?</entry>
|
||||
<entry lang="nb" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Passordet må inneholde 20 eller flere tegn for å kunne bruke den angitte Argon2 PIM-en.\nKortere passord kan kun brukes hvis Argon2 PIM er 12 eller større.</entry>
|
||||
<entry lang="nb" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Monter NTFS-volumer med Linux-kjernens ntfs3-driver</entry>
|
||||
<entry lang="nb" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Kun for Linux. Når dette er aktivert, undersøker VeraCrypt den dekrypterte virtuelle enheten med blkid -p og monterer oppdagede NTFS-filsystemer med ntfs3 i stedet for standard NTFS-bakgrunnssystem. Hvis NTFS-deteksjonen mislykkes, bruker VeraCrypt vanlig automatisk filsystemvalg. Hvis ntfs3 er utilgjengelig eller blokkert av distribusjonen, kan monteringen mislykkes. Dette valgfrie alternativet kan forhindre at hvile- eller dvalemodus henger seg opp på grunn av fastlåste FUSE-filsystemer i brukermodus.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="nb" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal demontering av volumet {0} mislyktes. Dette kan skje når programmer fortsatt har filer eller mapper åpne på volumet, eller når den underliggende enheten ble frakoblet og monteringen ble foreldet.\n\nHvis enheten fortsatt er tilkoblet, velg Nei, lukk programmene som bruker volumet, og prøv å demontere på nytt.\n\nHvis enheten ble frakoblet eller monteringen er foreldet, kan VeraCrypt forsøke en nødopprydding ved å frakoble filsystemet og fjerne eller planlegge fjerning av VeraCrypts kjerneobjekter. Ventende skrivinger kan ha mislyktes, data kan gå tapt, og oppryddingen kan forbli ventende inntil programmene lukker åpne filer. Kontroller filsystemet med fsck eller et passende reparasjonsverktøy før du bruker det igjen.\n\nFortsette?</entry>
|
||||
<entry lang="nb" key="LINUX_EMERGENCY_UNMOUNTED">Nødopprydding for volumet {0} er igangsatt. Hvis volumet ble frakoblet, monteringen var foreldet, eller det var ventende skrivinger, kontroller filsystemet med fsck eller et passende reparasjonsverktøy før du bruker det igjen.</entry>
|
||||
<entry lang="nb" key="FORMAT_STAGE_WRITING_DATA">Oppretter volumdata. Vennligst vent.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="nl" key="PIM_ARGON2_LARGE_WARNING">U hebt een Argon2 PIM-waarde gekozen die hoger is dan de standaardwaarde van VeraCrypt.\nHoud er rekening mee dat dit meer geheugen kan vergen en kan leiden tot een aanzienlijk tragere koppeling.</entry>
|
||||
<entry lang="nl" key="PIM_ARGON2_SMALL_WARNING">U hebt een Argon2-PIM-waarde gekozen die lager is dan de standaardwaarde van VeraCrypt. Houd er rekening mee dat als uw wachtwoord niet sterk genoeg is, dit kan leiden tot een lagere beveiliging.\n\nBevestigt u dat u een sterk wachtwoord gebruikt?</entry>
|
||||
<entry lang="nl" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Het wachtwoord moet uit minimaal 20 tekens bestaan om de opgegeven Argon2-PIM te kunnen gebruiken.\nKortere wachtwoorden kunnen alleen worden gebruikt als de Argon2-PIM 12 of hoger is.</entry>
|
||||
<entry lang="nl" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">NTFS-volumes koppelen met het ntfs3-stuurprogramma van de Linux-kernel</entry>
|
||||
<entry lang="nl" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Alleen voor Linux. Wanneer deze optie is ingeschakeld, controleert VeraCrypt het ontsleutelde virtuele apparaat met `blkid -p` en koppelt het gedetecteerde NTFS-bestandssystemen met ntfs3 in plaats van de standaard NTFS-backend. Als de NTFS-detectie mislukt, gebruikt VeraCrypt de normale automatische bestandssysteemselectie. Als ntfs3 niet beschikbaar is of door de distributie wordt geblokkeerd, kan het koppelen mislukken. Deze opt-in-optie kan vastlopen tijdens slaapstand of sluimerstand voorkomen dat wordt veroorzaakt door bevroren FUSE-bestandssystemen in de gebruikersruimte.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="nl" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Het normaal ontkoppelen van volume {0} is mislukt. Dit kan gebeuren wanneer applicaties nog bestanden of mappen op het volume open hebben staan, of wanneer het onderliggende apparaat is losgekoppeld en de koppeling verouderd is geraakt.\n\nAls het apparaat nog is aangesloten, kies dan ‘Nee’, sluit de applicaties die het volume gebruiken en probeer het ontkoppelen opnieuw.\n\nAls het apparaat is losgekoppeld of de koppeling verouderd is, kan VeraCrypt een noodopruiming uitvoeren door het bestandssysteem lui los te koppelen en VeraCrypt-kernelobjecten te verwijderen of de verwijdering ervan in te plannen. Lopende schrijfbewerkingen zijn mogelijk mislukt, er kan gegevensverlies optreden en de opruiming kan in behandeling blijven totdat applicaties geopende bestanden sluiten. Controleer het bestandssysteem met fsck of het juiste reparatieprogramma voordat u het opnieuw gebruikt.\n\nDoorgaan?</entry>
|
||||
<entry lang="nl" key="LINUX_EMERGENCY_UNMOUNTED">De noodopruiming voor volume {0} is gestart. Als het volume was losgekoppeld, de koppeling verouderd was of er nog schrijfbewerkingen in de wachtrij stonden, controleer dan het bestandssysteem met fsck of het juiste reparatieprogramma voordat u het weer gebruikt.</entry>
|
||||
<entry lang="nl" key="FORMAT_STAGE_WRITING_DATA">Volumegegevens aanmaken. Even geduld.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="pl" key="PIM_ARGON2_LARGE_WARNING">Wybrano wartość PIM Argon2 większą niż domyślna wartość VeraCrypt.\nNależy pamiętać, że może to wymagać więcej pamięci i prowadzić do znacznie wolniejszego podłączania.</entry>
|
||||
<entry lang="pl" key="PIM_ARGON2_SMALL_WARNING">Wybrano wartość PIM Argon2 mniejszą niż domyślna wartość VeraCrypt. Należy pamiętać, że jeśli hasło nie jest wystarczająco silne, może to prowadzić do osłabienia zabezpieczeń.\n\nCzy potwierdzasz użycie silnego hasła?</entry>
|
||||
<entry lang="pl" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Hasło musi zawierać przynajmniej 20 albo więcej znaków do używania określonego PIM Argon2.\nKrótszych haseł można używać tylko wtedy, gdy PIM Argon2 ma wartość 12 lub większą.</entry>
|
||||
<entry lang="pl" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Podłączaj wolumeny NTFS za pomocą sterownika ntfs3 jądra systemu Linux</entry>
|
||||
<entry lang="pl" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Tylko system Linux. Po włączeniu tej opcji VeraCrypt skanuje odszyfrowane urządzenie wirtualne za pomocą blkid -p i podłącza wykryte systemy plików NTFS za pomocą sterownika NTFS3 zamiast domyślnego NTFS. Jeśli wykrycie NTFS się nie powiedzie, VeraCrypt użyje standardowego automatycznego wyboru systemu plików. Jeśli NTFS3 jest niedostępny lub zablokowany przez dystrybucję, podłączenie może się nie powieść. To opcjonalne ustawienie pozwala uniknąć zawieszeń w trybie uśpienia lub hibernacji spowodowanych przez zamrożone systemy plików FUSE w przestrzeni użytkownika.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="pl" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Nie udało się wykonać normalnego odłączenia wolumenu {0}. Może się to zdarzyć, gdy programy nadal mają otwarte pliki lub katalogi na wolumenie lub gdy urządzenie bazowe zostało rozłączone, a podłączenie stało się nieaktualne.\n\nJeśli urządzenie jest nadal podłączone, wybierz opcję „Nie”, zamknij programy korzystające z wolumenu i spróbuj ponownie odłączyć.\n\nJeśli urządzenie zostało rozłączone lub podłączenie jest nieaktualne, VeraCrypt może podjąć próbę awaryjnego czyszczenia poprzez leniwe odłączenie systemu plików i usunięcie lub zaplanowanie usunięcia obiektów jądra VeraCrypt. Oczekujące zapisy mogły się nie powieść, dane mogły zostać utracone, a czyszczenie może pozostać w toku do momentu zamknięcia otwartych plików przez programy. Sprawdź system plików za pomocą fsck lub odpowiedniego narzędzia naprawczego przed ponownym użyciem.\n\nKontynuować?</entry>
|
||||
<entry lang="pl" key="LINUX_EMERGENCY_UNMOUNTED">Rozpoczęto awaryjne czyszczenie wolumenu {0}. Jeśli wolumen był rozłączony, podłączenie było nieaktualne lub występowały oczekujące operacje zapisu, sprawdź system plików za pomocą fsck lub odpowiedniego narzędzia naprawczego przed ponownym użyciem.</entry>
|
||||
<entry lang="pl" key="FORMAT_STAGE_WRITING_DATA">Tworzenie danych wolumenu. Proszę czekać.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="ro" key="PIM_ARGON2_LARGE_WARNING">Ați ales o valoare MIP Argon2 mai mare decât valoarea implicită din VeraCrypt.\nAcest lucru poate necesita mai multă memorie și poate duce la o montare mult mai lentă.</entry>
|
||||
<entry lang="ro" key="PIM_ARGON2_SMALL_WARNING">Ați ales o valoare MIP Argon2 mai mică decât valoarea implicită din VeraCrypt. Dacă parola nu este suficient de puternică, acest lucru ar putea duce la o securitate mai slabă.\n\nConfirmați că utilizați o parolă puternică?</entry>
|
||||
<entry lang="ro" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Parola trebuie să conțină 20 sau mai multe caractere pentru a utiliza valoarea MIP Argon2 specificată. Parolele mai scurte pot fi utilizate numai dacă valoarea MIP Argon2 este 12 sau mai mare.</entry>
|
||||
<entry lang="ro" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Montare volume NTFS cu driverul ntfs3 din kernelul Linux</entry>
|
||||
<entry lang="ro" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Doar în Linux. Când este activat, VeraCrypt verifică dispozitivul virtual decriptat cu blkid -p și montează sistemele de fișiere NTFS detectate cu ntfs3 în loc de implementarea NTFS implicită. Dacă detectarea NTFS eșuează, VeraCrypt utilizează selecția automată normală a sistemului de fișiere. Dacă ntfs3 nu este disponibil sau este blocat de distribuție, montarea poate eșua. Această posibilitate de alegere poate evita blocările în suspendare sau hibernare cauzate de sistemele de fișiere FUSE înghețate în spațiul utilizatorului.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="ro" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Demontarea normală a volumului {0} a eșuat. Aceasta poate apărea când aplicațiile au încă fișiere sau foldere deschise pe volum sau când dispozitivul respectiv a fost deconectat și montarea a devenit învechită.\n\nDacă dispozitivul este încă conectat, alegeți Nu, închideți aplicațiile care folosesc volumul și reîncercați demontarea.\n\nDacă dispozitivul a fost deconectat sau montarea este învechită, VeraCrypt poate încerca curățarea de urgență prin detașarea întârziată a sistemului de fișiere și eliminarea sau programarea eliminării obiectelor nucleului VeraCrypt. Scrierile în așteptare ar putea eșua, datele s-ar putea pierde, iar curățarea ar putea rămâne în așteptare până când aplicațiile închid fișierele deschise. Verificați sistemul de fișiere cu fsck sau cu instrumentul de reparare corespunzător înainte de a-l utiliza din nou.\n\nContinuați?</entry>
|
||||
<entry lang="ro" key="LINUX_EMERGENCY_UNMOUNTED">Curățarea de urgență pentru volumul {0} a fost inițiată. Dacă volumul a fost deconectat, montarea era învechită sau existau scrieri în așteptare, verificați sistemul de fișiere cu fsck sau cu instrumentul de reparare corespunzător înainte de a-l reutiliza.</entry>
|
||||
<entry lang="ro" key="FORMAT_STAGE_WRITING_DATA">Se creează datele volumului. Așteptați.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="ru" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Монтировать тома NTFS с помощью драйвера ntfs3 ядра Linux</entry>
|
||||
<entry lang="ru" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Только Linux. Если включено, VeraCrypt проверяет расшифрованное виртуальное устройство с помощью blkid -p и монтирует обнаруженные файловые системы NTFS с помощью драйвера ntfs3 вместо стандартного NTFS-бэкенда. Если NTFS не удалось определить, VeraCrypt использует обычный автоматический выбор файловой системы. Если ntfs3 недоступен или заблокирован дистрибутивом, монтирование может завершиться ошибкой. Эта необязательная настройка может предотвратить зависания при ждущем режиме или гибернации из-за замороженных файловых систем FUSE, работающих в пользовательском пространстве.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1669,8 +1669,9 @@
|
||||
<entry lang="zh-cn" key="PIM_ARGON2_LARGE_WARNING">您选择的 Argon2 PIM 值大于 VeraCrypt 的默认值。\n请注意，这可能需要更多内存，并导致挂载速度显著变慢。</entry>
|
||||
<entry lang="zh-cn" key="PIM_ARGON2_SMALL_WARNING">您选择的 Argon2 PIM 值小于 VeraCrypt 的默认值。请注意，如果您的密码强度不够，这可能导致安全性降低。\n\n您确认正在使用强密码吗？</entry>
|
||||
<entry lang="zh-cn" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">密码必须包含 20 个或更多字符，才能使用指定的 Argon2 PIM。\n较短的密码只有在 Argon2 PIM 大于或等于 12 时才能使用。</entry>
|
||||
<entry lang="zh-cn" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">使用 Linux 内核 ntfs3 驱动程序挂载 NTFS 卷</entry>
|
||||
<entry lang="zh-cn" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">仅限 Linux。启用后，VeraCrypt 会使用 blkid -p 探测解密的虚拟设备，并使用 ntfs3 挂载检测到的 NTFS 文件系统，而不是默认的 NTFS 后端。如果 NTFS 检测失败，VeraCrypt 将使用正常的自动文件系统选择。如果 ntfs3 不可用或被发行版阻止，挂载可能会失败。此手动启用选项可以避免因冻结的用户空间 FUSE 文件系统导致的挂起或休眠卡顿。</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="zh-cn" key="LINUX_EMERGENCY_UNMOUNT_WARNING">卷 {0} 的正常卸载失败。当应用程序仍在卷上打开文件或目录，或者后端设备已断开连接导致挂载状态失效时，可能会发生这种情况。\n\n如果设备仍处于连接状态，请选择“否”，关闭使用该卷的应用程序，然后再次尝试卸载。\n\n如果设备已断开连接或挂载状态已失效，VeraCrypt 可以尝试执行紧急清理：惰性脱离文件系统，并移除或安排移除 VeraCrypt 内核对象。待处理的写入可能已失败，数据可能丢失，并且清理操作可能保持挂起状态，直到应用程序关闭打开的文件。再次使用前，请使用 fsck 或相应的修复工具检查文件系统。\n\n继续？</entry>
|
||||
<entry lang="zh-cn" key="LINUX_EMERGENCY_UNMOUNTED">已对卷 {0} 启动紧急清理。如果卷已断开连接、挂载状态失效或存在待处理的写入操作，请在再次使用前使用 fsck 或相应的修复工具检查文件系统。</entry>
|
||||
<entry lang="zh-cn" key="FORMAT_STAGE_WRITING_DATA">正在创建卷数据。请稍候。</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
@@ -1668,8 +1668,9 @@
|
||||
<entry lang="en" key="PIM_ARGON2_LARGE_WARNING">You have chosen an Argon2 PIM value that is larger than VeraCrypt default value.\nPlease note that this can require more memory and lead to much slower mounting.</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_SMALL_WARNING">You have chosen an Argon2 PIM value that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to weaker security.\n\nDo you confirm that you are using a strong password?</entry>
|
||||
<entry lang="en" key="PIM_ARGON2_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified Argon2 PIM.\nShorter passwords can only be used if the Argon2 PIM is 12 or greater.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3">Mount NTFS volumes with the Linux kernel ntfs3 driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_NTFS3_HELP">Linux only. When enabled, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with ntfs3 instead of the default NTFS backend. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If ntfs3 is unavailable or blocked by the distribution, mounting may fail. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER">Mount NTFS volumes with an in-kernel Linux driver</entry>
|
||||
<entry lang="en" key="LINUX_PREF_MOUNT_NTFS_WITH_KERNEL_DRIVER_HELP">Linux only. When enabled and no explicit filesystem type was supplied, VeraCrypt probes the decrypted virtual device with blkid -p and mounts detected NTFS filesystems with an available in-kernel NTFS driver, bypassing mount helpers such as ntfs-3g. VeraCrypt uses ntfs when it is positively identified as a modern read/write driver or expected on Linux 7.1 or later, and otherwise uses ntfs3. If NTFS detection fails, VeraCrypt uses the normal automatic filesystem selection. If no supported in-kernel NTFS driver is available or loadable, mounting fails. This opt-in option can avoid suspend or hibernate hangs caused by frozen user-space FUSE filesystems.</entry>
|
||||
<entry lang="en" key="LINUX_KERNEL_NTFS_DRIVER_UNAVAILABLE">No supported in-kernel NTFS driver is available or loadable. To use the system default NTFS backend, disable the NTFS kernel-driver preference or do not request kernel NTFS explicitly.</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNT_WARNING">Normal unmount of volume {0} failed. This can happen when applications still have files or directories open on the volume, or when the backing device was disconnected and the mount became stale.\n\nIf the device is still connected, choose No, close applications using the volume, and try unmounting again.\n\nIf the device was disconnected or the mount is stale, VeraCrypt can attempt emergency cleanup by lazy-detaching the filesystem and removing or scheduling removal of VeraCrypt kernel objects. Pending writes may have failed, data may be lost, and cleanup may remain pending until applications close open files. Check the filesystem with fsck or the appropriate repair tool before using it again.\n\nContinue?</entry>
|
||||
<entry lang="en" key="LINUX_EMERGENCY_UNMOUNTED">Emergency cleanup for volume {0} has been initiated. If the volume was disconnected, the mount was stale, or there were pending writes, check the filesystem with fsck or the appropriate repair tool before using it again.</entry>
|
||||
<entry lang="en" key="FORMAT_STAGE_WRITING_DATA">Creating volume data. Please wait.</entry>
|
||||
|
||||
Reference in New Issue
Block a user