tools: build: sign cab file using SHA-256

When the kernel sends a `Create` message the WinFsp-FUSE layer creates
and opens the file (as per Windows semantics). Sometimes an additional
operation needs to be performed after the file has been opened, which
may fail. In this case the just opened file must be released.

In this particular case the WinFsp-FUSE layer used to call `release`
with an uninitialized path. This commit fixes the problem.

This problem was originally reported in cgofuse (billziss-gh/cgofuse#58)

Changelog.asciidoc

@@ -1,6 +1,58 @@
 = Changelog
 
 
+v1.10B2 (2021.1 Beta2)::
+
+Changes since v1.9:
+
+* [NEW] Official Windows 11 support.
+
+* [NEW] WinFsp has had its Delete functionality redesigned in release 2021.1 Beta3. This redesign unifies all Windows file deletion semantics under a single file system operation that also supports the new POSIX semantics introduced in Windows 10 Redstone 1. The new Delete design is recommended for new file systems, however existing file systems will continue to work without any changes. See https://github.com/billziss-gh/winfsp/wiki/WinFsp-Delete-Redesign for more information.
+
+* [NEW] Support for `FileDispositionInformationEx` and `FileRenameInformationEx` has been added (see above).
+
+* [NEW] WinFsp now supports rebranding of the build products. This is primarily useful to commercial licensees. See https://github.com/billziss-gh/winfsp/wiki/WinFsp-Rebranding for more information.
+
+* [NEW] WinFsp-FUSE has a new capability `FSP_FUSE_CAP_DELETE_ACCESS`. If this capability is specified WinFsp will call the FUSE `access` method with the WinFsp-specific flag `FSP_FUSE_DELETE_OK` to check whether the deletion should be allowed. This can be used to disallow deletion of files and directories that would normally be allowed under the FUSE/POSIX model.
+
+* [NEW] WinFsp-FUSE has a new method for determining file access in the case where the user's primary SID (Windows Security Identifier) and group SID are the same (for example, this can happen when someone uses a Microsoft account as their primary login).
+** Previously when the user SID and group SID were the same WinFsp-FUSE looked at the UNIX permissions for the owner and the UNIX permissions for the group and used the MOST restrictive permissions, which often resulted in inadvertent "access denied" errors. (For example, if the owner permission was `rw-` and the group permission was `---` the result was `---` and therefore access denied).
+** Going forward this behavior will change. The user and group mode permissions will not be considered together even in the case where the user SID and group SID are the same. This will resolve the access denied errors.
+** However to preserve backward compatibility (there might be some file systems that rely on the old behavior) we will do so in stages. For release v1.10 (2021.1) there is a new registry setting under `HKLM\SOFTWARE\WinFsp` (or `HKLM\SOFTWARE\WOW6432Node\WinFsp` on a 64-bit system) called `DistinctPermsForSameOwnerGroup`, which if set to 1 will direct WinFsp-FUSE to use the new behavior. The default value is 0 which directs WinFsp-FUSE to use the old behavior. This default will change in a future release.
+
+* [NEW] A new registry setting under `HKLM\SOFTWARE\WinFsp` (or `HKLM\SOFTWARE\WOW6432Node\WinFsp` on a 64-bit system) called `MountDoNotUseLauncher` has been introduced, which if set to 1 will disable the use of the Launcher during mounting. The default value is 0 which allows the use of the Launcher during mounting in those rare cases when necessary. (In general the Launcher is not necessary for mounting. However when running a file system in the Windows Service context (session 0) under an account that is not LocalSystem (e.g. `NT AUTHORITY\NETWORK SERVICE`), the Launcher is used to create global drives.)
+
+* [FIX] File share access when overwriting a file (e.g. when using `TRUNCATE_EXISTING`) is now done in a manner compatible with NTFS (previously there were cases when overwriting a file where behavior diverged from the NTFS one). (See GitHub issue #364.)
+
+* [FIX] The FSD will now report a file's reparse tag in the `EaSize` field of `FILE_FULL_DIR_INFORMATION` and friends. This fixes problems such as `cmd.exe` not recognizing symlinks in a `dir` command. (See GitHub issue #380.)
+
+* [FIX] Fixed a problem in the file system shutdown protocol which resolves an occasional access violation in the user mode file system process. Previously it was possible for a file system to crash when stopping itself using `FspFileSystemStopDispatcher`; this problem has been rectified. (See GitHub issue #369.)
+
+* [FIX] Fixed a problem in the FUSE layer where in some rare circumstances the `release` operation could be called with an uninitialized `path` argument. (See GitHub issue billziss-gh/cgofuse#58 and commit f51bdef53427d1bba688fb6c768792fdc22ffc7b).
+
+* [FIX] Fixed a potential problem when launching file system instances using the Launcher. (See GitHub issue #356.)
+
+* [FIX] The `winfsp.h` header no longer defines `FILE_FULL_EA_INFORMATION` when compiled under mingw. This is because the mingw tool chain already includes a definition of this type. (GitHub PR #371. Thanks @lemourin.)
+
+
+v1.10B1 (2021.1 Beta1)::
+
+Changes since v1.9:
+
+* [NEW] WinFsp now supports rebranding of the build products. This is primarily useful to commercial licensees. See https://github.com/billziss-gh/winfsp/wiki/WinFsp-Rebranding for more information.
+
+* [NEW] WinFsp-FUSE has a new method for determining file access in the case where the user's primary SID (Windows Security Identifier) and group SID are the same (for example, this can happen when someone uses a Microsoft account as their primary login).
+** Previously when the user SID and group SID were the same WinFsp-FUSE looked at the UNIX permissions for the owner and the UNIX permissions for the group and used the MOST restrictive permissions, which often resulted in inadvertent "access denied" errors. (For example, if the owner permission was `rw-` and the group permission was `---` the result was `---` and therefore access denied).
+** Going forward this behavior will change. The user and group mode permissions will not be considered together even in the case where the user SID and group SID are the same. This will resolve the access denied errors.
+** However to preserve backward compatibility (there might be some file systems that rely on the old behavior) we will do so in stages. For release v1.10 (2021.1) there is a new registry setting under `HKLM\SOFTWARE\WinFsp` (or `HKLM\SOFTWARE\WOW6432Node\WinFsp` on a 64-bit system) called `DistinctPermsForSameOwnerGroup`, which if set to 1 will direct WinFsp-FUSE to use the new behavior. The default value is 0 which directs WinFsp-FUSE to use the old behavior. This default will change in a future release.
+
+* [FIX] File share access when overwriting a file (e.g. when using `TRUNCATE_EXISTING`) is now done in a manner compatible with NTFS (previously there were cases when overwriting a file where behavior diverged from the NTFS one). (See GitHub issue #364.)
+
+* [FIX] Fixed a problem in the file system shutdown protocol which resolves an occasional access violation in the user mode file system process. Previously it was possible for a file system to crash when stopping itself using `FspFileSystemStopDispatcher`; this problem has been rectified. (See GitHub issue #369.)
+
+* [FIX] The `winfsp.h` header no longer defines `FILE_FULL_EA_INFORMATION` when compiled under mingw. This is because the mingw tool chain already includes a definition of this type. (GitHub PR #371. Thanks @lemourin.)
+
+
 v1.9 (2021)::
 
 Changes since v1.8:

Contributors.asciidoc

@@ -65,6 +65,7 @@ CONTRIBUTOR LIST
 |Gal Hammer (Red Hat, https://www.redhat.com)                   |ghammer at redhat.com
 |John Oberschelp                                                |john at oberschelp.net
 |John Tyner                                                     |jtyner at gmail.com
+|Paweł Wegner (Google LLC, https://google.com)                  |lemourin at google.com
 |Pedro Frejo (Arpa System, https://arpasystem.com)              |pedro.frejo at arpasystem.com
 |Sam Kelly (DuroSoft Technologies LLC, https://durosoft.com)    |sam at durosoft.com
 |Santiago Ganis                                                 |sganis at gmail.com

README.md

@@ -1,8 +1,8 @@
 <h1 align="center">
+    <img src="art/winfsp-glow.png" width="256"/>
+    <br/>
+    <br/>
     WinFsp &middot; Windows File System Proxy
-    <a href="https://twitter.com/intent/tweet?url=https%3A%2F%2Fgithub.com%2Fbillziss-gh%2Fwinfsp&text=Do%20you%20want%20to%20write%20a%20file%20system%20on%20Windows%3F%20WinFsp%20is%20well%20tested%2C%20very%20fast%20and%20easy%20to%20use%21&hashtags=windows%2Cfilesystem">
-        <img src="https://img.shields.io/twitter/url/http/shields.io.svg?style=social&label=Share"/>
-    </a>
 </h1>
 
 <p align="center">
@@ -17,24 +17,12 @@
         <img src="https://img.shields.io/badge/choco-install%20winfsp-black.svg?style=for-the-badge"/>
     </a>
     <br/>
-    <b>Quick Links</b><br/>
-    <a href="#benefits">Benefits</a> |
-    <a href="https://github.com/billziss-gh/winfsp/wiki">Wiki</a> |
-    <a href="https://groups.google.com/forum/#!forum/winfsp">Questions</a> |
-    <a href="https://twitter.com/BZissimopoulos">Author's Twitter</a>
-    <br/>
     <br/>
     <a href="https://ci.appveyor.com/project/billziss-gh/winfsp">
         <img src="https://img.shields.io/appveyor/ci/billziss-gh/winfsp.svg"/>
     </a>
     <br/>
     <br/>
-    <b>Check out my new kernel driver project <a href="https://github.com/billziss-gh/winspd">WinSpd</a>.</b>
-    <br/>
-    <br/>
-</p>
-
-<p align="center">
     WinFsp is a set of software components for Windows computers that allows the creation of user mode file systems. In this sense it is similar to FUSE (Filesystem in Userspace), which provides the same functionality on UNIX-like computers.
     <br/>
     <br/>

appveyor.yml

@@ -42,8 +42,8 @@ install:
 build_script:
 - appveyor AddMessage "Reboot complete" -Category Information
 # build cygfuse
-- C:\cygwin64\setup-x86_64.exe -qnNd -P cygport
-- C:\cygwin64\bin\bash --login -c "make -C '%CD%\opt\cygfuse' dist"
+#- C:\cygwin64\setup-x86_64.exe -qnNd -P cygport
+#- C:\cygwin64\bin\bash --login -c "make -C '%CD%\opt\cygfuse' dist"
 #- C:\cygwin\setup-x86.exe -qnNd -P cygport
 #- C:\cygwin\bin\bash --login -c "make -C '%CD%\opt\cygfuse' dist"
 # build winfsp

build/VStudio/dotnet/winfsp.net.csproj

@@ -9,7 +9,7 @@
     <OutputType>Library</OutputType>
     <ProjectName>winfsp.net</ProjectName>
     <RootNamespace>Fsp</RootNamespace>
-    <AssemblyName>winfsp-msil</AssemblyName>
+    <AssemblyName>$(MyProductFileName)-msil</AssemblyName>
     <TargetFrameworkVersion>v3.5</TargetFrameworkVersion>
     <FileAlignment>512</FileAlignment>
     <TargetFrameworkProfile />
@@ -25,7 +25,7 @@
     <ErrorReport>prompt</ErrorReport>
     <WarningLevel>4</WarningLevel>
     <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
-    <DocumentationFile>$(BaseIntermediateOutputPath)$(Configuration)\winfsp-msil.xml</DocumentationFile>
+    <DocumentationFile>$(BaseIntermediateOutputPath)$(Configuration)\$(MyProductFileName)-msil.xml</DocumentationFile>
     <NoWarn>1591</NoWarn>
   </PropertyGroup>
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|AnyCPU' ">
@@ -38,7 +38,7 @@
     <ErrorReport>prompt</ErrorReport>
     <WarningLevel>4</WarningLevel>
     <AllowUnsafeBlocks>true</AllowUnsafeBlocks>
-    <DocumentationFile>$(BaseIntermediateOutputPath)$(Configuration)\winfsp-msil.xml</DocumentationFile>
+    <DocumentationFile>$(BaseIntermediateOutputPath)$(Configuration)\$(MyProductFileName)-msil.xml</DocumentationFile>
     <NoWarn>1591</NoWarn>
   </PropertyGroup>
   <PropertyGroup>

build/VStudio/installer/CustomActions/CustomActions.cpp

@@ -1,7 +1,7 @@
 /**
  * @file CustomActions.cpp
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

build/VStudio/installer/Product.wxs

@@ -20,7 +20,7 @@
             AllowSameVersionUpgrades="no"
             DisallowUpgradeErrorMessage="An older version of $(var.MyProductName) is already installed. You must uninstall it before you can install this version."
             DowngradeErrorMessage="A newer version of $(var.MyProductName) is already installed." />
-        <Media Id="1" Cabinet="WinFsp.cab" EmbedCab="yes" />
+        <Media Id="1" Cabinet="$(var.MyProductName).cab" EmbedCab="yes" />
 
         <Property Id="P.LauncherName">$(var.MyProductName).Launcher</Property>
         <Property Id="P.LauncherRegistryKey">Software\$(var.MyProductName)\Services</Property>
@@ -36,7 +36,7 @@
 
         <Directory Id="TARGETDIR" Name="SourceDir">
             <Directory Id="ProgramFilesFolder">
-                <Directory Id="INSTALLDIR" Name="WinFsp">
+                <Directory Id="INSTALLDIR" Name="$(var.MyProductName)">
                     <Directory Id="BINDIR" Name="bin" />
                     <Directory Id="INCDIR" Name="inc" />
                     <Directory Id="LIBDIR" Name="lib" />
@@ -55,54 +55,54 @@
                     Name="InstallDir"
                     Type="string"
                     Value="[INSTALLDIR]" />
-                <dep:Provides Key="WinFsp" />
+                <dep:Provides Key="$(var.MyProductName)" />
             </Component>
             <Component Id="C.License.txt">
                 <File Name="License.txt" Source="..\..\..\License.txt" KeyPath="yes" />
             </Component>
         </DirectoryRef>
         <DirectoryRef Id="BINDIR" FileSource="..\build\$(var.Configuration)">
-            <Component Id="C.winfsp_x64.sys">
-                <File Name="winfsp-x64.sys" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x64.sys">
+                <File Name="$(var.MyProductFileName)-x64.sys" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_x86.sys">
-                <File Name="winfsp-x86.sys" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x86.sys">
+                <File Name="$(var.MyProductFileName)-x86.sys" KeyPath="yes" />
             </Component>
 
-            <!-- On Win64 register winfsp-x64.dll -->
-            <Component Id="C.winfsp_x64.dll.selfreg" Guid="F0A67746-1A9C-4976-8EC0-882E9407FA6D">
-                <File Id="FILE.winfsp_x64.dll.selfreg" Name="winfsp-x64.dll" KeyPath="yes" SelfRegCost="1" />
+            <!-- On Win64 register $(var.MyProductFileName)-x64.dll -->
+            <Component Id="C.$(var.MyProductFileName)_x64.dll.selfreg" Guid="F0A67746-1A9C-4976-8EC0-882E9407FA6D">
+                <File Id="FILE.$(var.MyProductFileName)_x64.dll.selfreg" Name="$(var.MyProductFileName)-x64.dll" KeyPath="yes" SelfRegCost="1" />
                 <Condition>VersionNT64</Condition>
             </Component>
-            <Component Id="C.winfsp_x86.dll" Guid="950492FB-12F7-4E27-9124-8325A2BC9927">
-                <File Name="winfsp-x86.dll" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x86.dll" Guid="950492FB-12F7-4E27-9124-8325A2BC9927">
+                <File Name="$(var.MyProductFileName)-x86.dll" KeyPath="yes" />
                 <Condition>VersionNT64</Condition>
             </Component>
 
-            <!-- On Win32 register winfsp-x86.dll -->
-            <Component Id="C.winfsp_x64.dll" Guid="4D6E7A8E-0CA6-49BE-B312-1EDADE725756">
-                <File Name="winfsp-x64.dll" KeyPath="yes" />
+            <!-- On Win32 register $(var.MyProductFileName)-x86.dll -->
+            <Component Id="C.$(var.MyProductFileName)_x64.dll" Guid="4D6E7A8E-0CA6-49BE-B312-1EDADE725756">
+                <File Name="$(var.MyProductFileName)-x64.dll" KeyPath="yes" />
                 <Condition>NOT VersionNT64</Condition>
             </Component>
-            <Component Id="C.winfsp_x86.dll.selfreg" Guid="F0DEF7A6-AF55-419F-A58A-DF4018C6FA73">
-                <File Id="FILE.winfsp_x86.dll.selfreg" Name="winfsp-x86.dll" KeyPath="yes" SelfRegCost="1" />
+            <Component Id="C.$(var.MyProductFileName)_x86.dll.selfreg" Guid="F0DEF7A6-AF55-419F-A58A-DF4018C6FA73">
+                <File Id="FILE.$(var.MyProductFileName)_x86.dll.selfreg" Name="$(var.MyProductFileName)-x86.dll" KeyPath="yes" SelfRegCost="1" />
                 <Condition>NOT VersionNT64</Condition>
             </Component>
 
             <!-- install assembly -->
-            <Component Id="C.winfsp_msil.dll" Guid="0D8BA6AE-9F87-402B-AE1A-95B0AE3BE179">
-                <File Id="FILE.winfsp_msil.dll" Name="winfsp-msil.dll" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_msil.dll" Guid="0D8BA6AE-9F87-402B-AE1A-95B0AE3BE179">
+                <File Id="FILE.$(var.MyProductFileName)_msil.dll" Name="$(var.MyProductFileName)-msil.dll" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_msil.xml" Guid="1657F707-C112-454C-91AE-0FDEBBF454AB">
-                <File Id="FILE.winfsp_msil.xml" Name="winfsp-msil.xml" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_msil.xml" Guid="1657F707-C112-454C-91AE-0FDEBBF454AB">
+                <File Id="FILE.$(var.MyProductFileName)_msil.xml" Name="$(var.MyProductFileName)-msil.xml" KeyPath="yes" />
             </Component>
             <!--
-            <Component Id="C.winfsp_msil.dll.GAC" Guid="6469467D-8C90-4889-8138-4028F9DA6E85">
-                <File Id="FILE.winfsp_msil.dll.GAC" Name="winfsp-msil.dll" KeyPath="yes" Assembly=".net" />
+            <Component Id="C.$(var.MyProductFileName)_msil.dll.GAC" Guid="6469467D-8C90-4889-8138-4028F9DA6E85">
+                <File Id="FILE.$(var.MyProductFileName)_msil.dll.GAC" Name="$(var.MyProductFileName)-msil.dll" KeyPath="yes" Assembly=".net" />
             </Component>
-            <Component Id="C.policy.winfsp_msil.dll.GAC">
-                <File Name="policy.1.0.winfsp-msil.dll" KeyPath="yes" Assembly=".net" />
-                <File Name="policy.1.0.winfsp-msil.config" KeyPath="no" />
+            <Component Id="C.policy.$(var.MyProductFileName)_msil.dll.GAC">
+                <File Name="policy.1.0.$(var.MyProductFileName)-msil.dll" KeyPath="yes" Assembly=".net" />
+                <File Name="policy.1.0.$(var.MyProductFileName)-msil.config" KeyPath="no" />
             </Component>
             -->
 
@@ -297,11 +297,11 @@
             </Directory>
         </DirectoryRef>
         <DirectoryRef Id="LIBDIR" FileSource="..\build\$(var.Configuration)">
-            <Component Id="C.winfsp_x64.lib">
-                <File Name="winfsp-x64.lib" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x64.lib">
+                <File Name="$(var.MyProductFileName)-x64.lib" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_x86.lib">
-                <File Name="winfsp-x86.lib" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x86.lib">
+                <File Name="$(var.MyProductFileName)-x86.lib" KeyPath="yes" />
             </Component>
 
             <!-- On Win64 copy fuse-x64.pc -->
@@ -565,17 +565,17 @@
             </Directory>
         </DirectoryRef>
         <DirectoryRef Id="SYMDIR">
-            <Component Id="C.winfsp_x64.sys.pdb">
-                <File Name="winfsp-x64.sys.pdb" Source="..\build\$(var.Configuration)\winfsp-x64.sys.public.pdb" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x64.sys.pdb">
+                <File Name="$(var.MyProductFileName)-x64.sys.pdb" Source="..\build\$(var.Configuration)\$(var.MyProductFileName)-x64.sys.public.pdb" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_x86.sys.pdb">
-                <File Name="winfsp-x86.sys.pdb" Source="..\build\$(var.Configuration)\winfsp-x86.sys.public.pdb" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x86.sys.pdb">
+                <File Name="$(var.MyProductFileName)-x86.sys.pdb" Source="..\build\$(var.Configuration)\$(var.MyProductFileName)-x86.sys.public.pdb" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_x64.dll.pdb">
-                <File Name="winfsp-x64.dll.pdb" Source="..\build\$(var.Configuration)\winfsp-x64.dll.public.pdb" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x64.dll.pdb">
+                <File Name="$(var.MyProductFileName)-x64.dll.pdb" Source="..\build\$(var.Configuration)\$(var.MyProductFileName)-x64.dll.public.pdb" KeyPath="yes" />
             </Component>
-            <Component Id="C.winfsp_x86.dll.pdb">
-                <File Name="winfsp-x86.dll.pdb" Source="..\build\$(var.Configuration)\winfsp-x86.dll.public.pdb" KeyPath="yes" />
+            <Component Id="C.$(var.MyProductFileName)_x86.dll.pdb">
+                <File Name="$(var.MyProductFileName)-x86.dll.pdb" Source="..\build\$(var.Configuration)\$(var.MyProductFileName)-x86.dll.public.pdb" KeyPath="yes" />
             </Component>
             <Component Id="C.launcher_x64.pdb">
                 <File Name="launcher-x64.pdb" Source="..\build\$(var.Configuration)\launcher-x64.public.pdb" KeyPath="yes" />
@@ -603,13 +603,13 @@
             </Component>
         </DirectoryRef>
 
-        <ComponentGroup Id="C.WinFsp.bin">
-            <ComponentRef Id="C.winfsp_x64.sys" />
-            <ComponentRef Id="C.winfsp_x86.sys" />
-            <ComponentRef Id="C.winfsp_x64.dll.selfreg" />
-            <ComponentRef Id="C.winfsp_x86.dll" />
-            <ComponentRef Id="C.winfsp_x64.dll" />
-            <ComponentRef Id="C.winfsp_x86.dll.selfreg" />
+        <ComponentGroup Id="C.$(var.MyProductName).bin">
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.sys" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.sys" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.dll.selfreg" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.dll" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.dll" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.dll.selfreg" />
             <ComponentRef Id="C.launcher_x64.exe.svcinst" />
             <ComponentRef Id="C.launcher_x86.exe" />
             <ComponentRef Id="C.launcher_x64.exe" />
@@ -621,7 +621,7 @@
             <ComponentRef Id="C.diag.bat" />
             <ComponentRef Id="C.fsreg.bat" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.inc">
+        <ComponentGroup Id="C.$(var.MyProductName).inc">
             <ComponentRef Id="C.fsctl.h" />
             <ComponentRef Id="C.winfsp.h" />
             <ComponentRef Id="C.launch.h" />
@@ -635,15 +635,15 @@
             <ComponentRef Id="C.fuse3_opt.h" />
             <ComponentRef Id="C.winfsp_fuse3.h" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.lib">
-            <ComponentRef Id="C.winfsp_x64.lib" />
-            <ComponentRef Id="C.winfsp_x86.lib" />
+        <ComponentGroup Id="C.$(var.MyProductName).lib">
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.lib" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.lib" />
             <ComponentRef Id="C.fuse_x64.pc" />
             <ComponentRef Id="C.fuse_x86.pc" />
             <ComponentRef Id="C.fuse3_x64.pc" />
             <ComponentRef Id="C.fuse3_x86.pc" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.opt.fuse">
+        <ComponentGroup Id="C.$(var.MyProductName).opt.fuse">
             <ComponentRef Id="C.fuse.tar.xz.x64" />
             <ComponentRef Id="C.fuse.tar.xz.x86" />
             <ComponentRef Id="C.fuse3.tar.xz.x64" />
@@ -651,12 +651,12 @@
             <ComponentRef Id="C.fuse.install.sh" />
             <ComponentRef Id="C.fuse.uninstall.sh" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.opt.fsext">
+        <ComponentGroup Id="C.$(var.MyProductName).opt.fsext">
             <ComponentRef Id="C.fsext.h" />
             <ComponentRef Id="C.fsext.winfsp_x64.lib" />
             <ComponentRef Id="C.fsext.winfsp_x86.lib" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.smp">
+        <ComponentGroup Id="C.$(var.MyProductName).smp">
             <ComponentRef Id="C.memfs_x64.exe" />
             <ComponentRef Id="C.memfs_x86.exe" />
             <ComponentRef Id="C.memfs.h" />
@@ -704,11 +704,11 @@
             <ComponentRef Id="C.notifyfs.vcxproj" />
             <ComponentRef Id="C.notifyfs.vcxproj.filters" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.sym">
-            <ComponentRef Id="C.winfsp_x64.sys.pdb" />
-            <ComponentRef Id="C.winfsp_x86.sys.pdb" />
-            <ComponentRef Id="C.winfsp_x86.dll.pdb" />
-            <ComponentRef Id="C.winfsp_x64.dll.pdb" />
+        <ComponentGroup Id="C.$(var.MyProductName).sym">
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.sys.pdb" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.sys.pdb" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x86.dll.pdb" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_x64.dll.pdb" />
             <ComponentRef Id="C.launcher_x86.pdb" />
             <ComponentRef Id="C.launcher_x64.pdb" />
             <ComponentRef Id="C.launchctl_x64.pdb" />
@@ -718,15 +718,15 @@
             <ComponentRef Id="C.memfs_x64.pdb" />
             <ComponentRef Id="C.memfs_x86.pdb" />
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.net">
-            <ComponentRef Id="C.winfsp_msil.dll" />
-            <ComponentRef Id="C.winfsp_msil.xml" />
+        <ComponentGroup Id="C.$(var.MyProductName).net">
+            <ComponentRef Id="C.$(var.MyProductFileName)_msil.dll" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_msil.xml" />
             <!--
-            <ComponentRef Id="C.winfsp_msil.dll.GAC" />
-            <ComponentRef Id="C.policy.winfsp_msil.dll.GAC" />
+            <ComponentRef Id="C.$(var.MyProductFileName)_msil.dll.GAC" />
+            <ComponentRef Id="C.policy.$(var.MyProductFileName)_msil.dll.GAC" />
             -->
         </ComponentGroup>
-        <ComponentGroup Id="C.WinFsp.smp.net">
+        <ComponentGroup Id="C.$(var.MyProductName).smp.net">
             <ComponentRef Id="C.memfs_dotnet_msil.exe" />
             <ComponentRef Id="C.memfs_dotnet.Program.cs" />
             <ComponentRef Id="C.passthrough_dotnet.Program.cs" />
@@ -757,8 +757,8 @@
                 AllowAdvertise="no"
                 InstallDefault="local"
                 Absent="disallow">
-                <ComponentGroupRef Id="C.WinFsp.bin" />
-                <ComponentGroupRef Id="C.WinFsp.net" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).bin" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).net" />
             </Feature>
             <!--
             <Feature
@@ -769,7 +769,7 @@
                 AllowAdvertise="no"
                 InstallDefault="local"
                 Absent="allow">
-                <ComponentGroupRef Id="C.WinFsp.net" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).net" />
             </Feature>
             -->
             <Feature
@@ -780,11 +780,11 @@
                 AllowAdvertise="no"
                 InstallDefault="local"
                 Absent="allow">
-                <ComponentGroupRef Id="C.WinFsp.inc" />
-                <ComponentGroupRef Id="C.WinFsp.lib" />
-                <ComponentGroupRef Id="C.WinFsp.smp" />
-                <ComponentGroupRef Id="C.WinFsp.smp.net" />
-                <ComponentGroupRef Id="C.WinFsp.sym" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).inc" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).lib" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).smp" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).smp.net" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).sym" />
             </Feature>
             <Feature
                 Id="F.KernelDeveloper"
@@ -794,7 +794,7 @@
                 AllowAdvertise="no"
                 InstallDefault="local"
                 Absent="allow">
-                <ComponentGroupRef Id="C.WinFsp.opt.fsext" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).opt.fsext" />
             </Feature>
             <Feature
                 Id="F.Cygfuse"
@@ -804,7 +804,7 @@
                 AllowAdvertise="no"
                 InstallDefault="local"
                 Absent="allow">
-                <ComponentGroupRef Id="C.WinFsp.opt.fuse" />
+                <ComponentGroupRef Id="C.$(var.MyProductName).opt.fuse" />
             </Feature>
         </Feature>
 

build/VStudio/installer/winfsp_msi.wixproj

@@ -7,7 +7,7 @@
     <ProductVersion>3.10</ProductVersion>
     <ProjectGuid>d53aac39-4c57-4ca5-a4f3-c2b24888c594</ProjectGuid>
     <SchemaVersion>2.0</SchemaVersion>
-    <OutputName>winfsp-$(MyVersion)</OutputName>
+    <OutputName>$(MyProductFileName)-$(MyVersion)</OutputName>
     <OutputType>Package</OutputType>
     <WixTargetsPath Condition=" '$(WixTargetsPath)' == '' AND '$(MSBuildExtensionsPath32)' != '' ">$(MSBuildExtensionsPath32)\Microsoft\WiX\v3.x\Wix.targets</WixTargetsPath>
     <WixTargetsPath Condition=" '$(WixTargetsPath)' == '' ">$(MSBuildExtensionsPath)\Microsoft\WiX\v3.x\Wix.targets</WixTargetsPath>
@@ -16,7 +16,7 @@
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Debug|x86' ">
     <OutputPath>$(SolutionDir)build\$(Configuration)\</OutputPath>
     <IntermediateOutputPath>$(SolutionDir)build\$(Name).build\$(Configuration)\$(Platform)\</IntermediateOutputPath>
-    <DefineConstants>Debug;MyProductName=$(MyProductName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyFullVersion=$(MyFullVersion)</DefineConstants>
+    <DefineConstants>Debug;MyProductName=$(MyProductName);MyProductFileName=$(MyProductFileName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyFullVersion=$(MyFullVersion)</DefineConstants>
     <SuppressAllWarnings>False</SuppressAllWarnings>
     <Pedantic>True</Pedantic>
     <SuppressPdbOutput>True</SuppressPdbOutput>
@@ -25,7 +25,7 @@
   <PropertyGroup Condition=" '$(Configuration)|$(Platform)' == 'Release|x86' ">
     <OutputPath>$(SolutionDir)build\$(Configuration)\</OutputPath>
     <IntermediateOutputPath>$(SolutionDir)build\$(Name).build\$(Configuration)\$(Platform)\</IntermediateOutputPath>
-    <DefineConstants>MyProductName=$(MyProductName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyFullVersion=$(MyFullVersion)</DefineConstants>
+    <DefineConstants>MyProductName=$(MyProductName);MyProductFileName=$(MyProductFileName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyFullVersion=$(MyFullVersion)</DefineConstants>
     <SuppressAllWarnings>False</SuppressAllWarnings>
     <Pedantic>True</Pedantic>
     <SuppressPdbOutput>True</SuppressPdbOutput>

build/VStudio/version.properties

@@ -12,14 +12,15 @@
         <MyGitRevision Condition="!$(MyGitHead.StartsWith(ref: ))">$(MyGitHead.Substring(0, 7))</MyGitRevision>
 
         <MyProductName>WinFsp</MyProductName>
+        <MyProductFileName>winfsp</MyProductFileName>
         <MyDescription>Windows File System Proxy</MyDescription>
         <MyCompanyName>Navimatics LLC</MyCompanyName>
         <MyCopyright>2015-$([System.DateTime]::Now.ToString(`yyyy`)) Bill Zissimopoulos</MyCopyright>
 
-        <MyCanonicalVersion>1.9</MyCanonicalVersion>
+        <MyCanonicalVersion>1.10</MyCanonicalVersion>
 
-        <MyProductVersion>2021</MyProductVersion>
-        <MyProductStage>Gold</MyProductStage>
+        <MyProductVersion>2021.1 Beta3</MyProductVersion>
+        <MyProductStage>Beta</MyProductStage>
 
         <MyVersion>$(MyCanonicalVersion).$(MyBuildNumber)</MyVersion>
         <MyVersionWithCommas>$(MyVersion.Replace('.',',')),0</MyVersionWithCommas>
@@ -27,14 +28,18 @@
 
         <MyAssemblyPolicyVersion>$(MyCanonicalVersion.Substring(0,$(MyVersion.IndexOf('.')))).0</MyAssemblyPolicyVersion>
         <MyAssemblyVersion>$(MyAssemblyPolicyVersion).0.0</MyAssemblyVersion>
+
+        <!-- When rebranding WinFsp you MUST change the following GUIDs - use VS "Create GUID" tool -->
+        <MyFspFsctlDeviceClassGuid>{ 0x6f9d25fa, 0x6dee, 0x4a9d, { 0x80, 0xf5, 0xe9, 0x8e, 0x14, 0xf3, 0x5e, 0x54 } }</MyFspFsctlDeviceClassGuid>
+        <MyFspFsvrtDeviceClassGuid>{ 0xb48171c3, 0xdd50, 0x4852, { 0x83, 0xa3, 0x34, 0x4c, 0x50, 0xd9, 0x3b, 0x17 } }</MyFspFsvrtDeviceClassGuid>
     </PropertyGroup>
 
     <ItemDefinitionGroup>
         <ClCompile>
-            <PreprocessorDefinitions>NTDDI_VERSION=0x06010000;_WIN32_WINNT=0x0601</PreprocessorDefinitions>
+            <PreprocessorDefinitions>NTDDI_VERSION=0x06010000;_WIN32_WINNT=0x0601;MyProductName=$(MyProductName);MyProductFileName=$(MyProductFileName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyVersionWithCommas=$(MyVersionWithCommas);MyFullVersion=$(MyFullVersion);MyFspFsctlDeviceClassGuid=$(MyFspFsctlDeviceClassGuid);MyFspFsvrtDeviceClassGuid=$(MyFspFsvrtDeviceClassGuid)</PreprocessorDefinitions>
         </ClCompile>
         <ResourceCompile>
-            <PreprocessorDefinitions>MyProductName=$(MyProductName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyVersionWithCommas=$(MyVersionWithCommas);MyFullVersion=$(MyFullVersion)</PreprocessorDefinitions>
+            <PreprocessorDefinitions>MyProductName=$(MyProductName);MyProductFileName=$(MyProductFileName);MyDescription=$(MyDescription);MyCompanyName=$(MyCompanyName);MyCopyright=$(MyCopyright);MyProductVersion=$(MyProductVersion);MyProductStage=$(MyProductStage);MyVersion=$(MyVersion);MyVersionWithCommas=$(MyVersionWithCommas);MyFullVersion=$(MyFullVersion)MyFspFsctlDeviceClassGuid=$(MyFspFsctlDeviceClassGuid);MyFspFsvrtDeviceClassGuid=$(MyFspFsvrtDeviceClassGuid)</PreprocessorDefinitions>
         </ResourceCompile>
     </ItemDefinitionGroup>
     <ItemDefinitionGroup Condition="'$(IsKernelModeToolset)'=='true'">

build/VStudio/winfsp_dll.vcxproj

@@ -182,25 +182,25 @@ copy /b $(OutDir)fuse3-$(PlatformTarget).pc + %(FullPath) $(OutDir)fuse3-$(Platf
     <LinkIncremental>true</LinkIncremental>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
     <LinkIncremental>true</LinkIncremental>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
     <LinkIncremental>false</LinkIncremental>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
     <LinkIncremental>false</LinkIncremental>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">
     <ClCompile>

build/VStudio/winfsp_sys.vcxproj

@@ -75,28 +75,28 @@
     <DebuggerFlavor>DbgengKernelDebugger</DebuggerFlavor>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
     <EnableInf2cat>false</EnableInf2cat>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|Win32'">
     <DebuggerFlavor>DbgengKernelDebugger</DebuggerFlavor>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
     <EnableInf2cat>false</EnableInf2cat>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Debug|x64'">
     <DebuggerFlavor>DbgengKernelDebugger</DebuggerFlavor>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
     <EnableInf2cat>false</EnableInf2cat>
   </PropertyGroup>
   <PropertyGroup Condition="'$(Configuration)|$(Platform)'=='Release|x64'">
     <DebuggerFlavor>DbgengKernelDebugger</DebuggerFlavor>
     <OutDir>$(SolutionDir)build\$(Configuration)\</OutDir>
     <IntDir>$(SolutionDir)build\$(ProjectName).build\$(Configuration)\$(PlatformTarget)\</IntDir>
-    <TargetName>$(SolutionName)-$(PlatformTarget)</TargetName>
+    <TargetName>$(MyProductFileName)-$(PlatformTarget)</TargetName>
     <EnableInf2cat>false</EnableInf2cat>
   </PropertyGroup>
   <ItemDefinitionGroup Condition="'$(Configuration)|$(Platform)'=='Debug|Win32'">

doc/Known-File-Systems.asciidoc

@@ -1,6 +1,6 @@
 = Known File Systems and File System Libraries
 
-This document contains a list of known file systems and file system libraries that run on WinFsp. Please contact the WinFsp project to have your file system solution added to this list.
+This document contains a list of known open-source file systems and file system libraries that run on WinFsp. Please contact the WinFsp project to have your file system solution added to this list.
 
 == File Systems
 
@@ -9,13 +9,16 @@ This document contains a list of known file systems and file system libraries th
 - https://github.com/lowleveldesign/fsmemfs[fsmemfs] - Memory File System written in F#
 - https://github.com/ihaveamac/fuse-3ds[fuse-3ds] - FUSE Filesystem Python scripts for Nintendo 3DS files
 - https://github.com/sganis/golddrive[golddrive] - Windows ssh network drive
+- https://github.com/billziss-gh/hubfs[hubfs] - File system for GitHub
 - https://github.com/FrKaram/KS2.Drive[KS2.Drive] - Mount a webDAV/AOS server as a local drive
 - https://github.com/billziss-gh/nfs-win[nfs-win] - NFS for Windows
+- https://github.com/billziss-gh/objfs[objfs] - Object Storage File System
 - https://github.com/ncw/rclone[rclone] - rsync for cloud storage
 - https://github.com/hasse69/rar2fs[rar2fs] - FUSE file system for reading RAR archives
 - https://github.com/billziss-gh/redditfs[redditfs] - ls -l /r/programming
 - https://github.com/netheril96/securefs[securefs] - Filesystem in userspace (FUSE) with transparent authenticated encryption
 - https://github.com/billziss-gh/sshfs-win[sshfs-win] - SSHFS for Windows
+- https://github.com/printpagestopdf/WordpressDrive[WordpressDrive] - Windows Userspace Filesystem based on WinFsp that presents a Wordpress Site as a Windows Drive
 - https://github.com/emoose/xbox-winfsp[xbox-winfsp] - Adds native support to Windows for the FATX, STFS & GDFX (aka XGD/XDVDFS) Xbox filesystems.
 - https://github.com/UtrechtUniversity/YodaDrive[YodaDrive] - Mount a Yoda drive as a local drive
 

doc/NTFS-Compatibility.asciidoc

@@ -17,13 +17,14 @@ WinFsp supports the following NTFS features:
 - Opportunistic locks.
 - Open, create, close, delete, query named streams.
 - Reparse points with special support for symbolic links.
+- Extended attributes.
+- Traditional Windows and POSIX semantics for delete and rename.
 
 == Unsupported features
 
 WinFsp does not support the following NTFS features:
 
 - Hard links. Rather rarely used on Windows. However it might be worthwhile to implement them for WinFsp.
-- Extended attributes. Although popular with POSIX file systems, they are severely hampered and rarely used on Windows. They are also not exposed via the Win32 API.
 - Short file names. Short file names are a relic of the past. WinFsp made a conscious decision not to support them.
 - Paging files. Providing paging file support via a user mode file system is impossible for a number of reasons.
 - Object ID's. Opening files by ID (+FILE_OPEN_BY_FILE_ID+) is not supported.

doc/WinFsp-API-launch.h.md

@@ -397,11 +397,13 @@ typedef struct _FSP_LAUNCH_REG_RECORD {
     PWSTR RunAs; 
     PWSTR Security; 
     PWSTR AuthPackage; 
-    PVOID Reserved0[5]; 
+    PWSTR Stderr; 
+    PVOID Reserved0[4]; 
     ULONG JobControl; 
     ULONG Credentials; 
     ULONG AuthPackageId; 
-    ULONG Reserved1[5]; 
+    ULONG Recovery; 
+    ULONG Reserved1[4]; 
     UINT8 Buffer[]; 
 } FSP_LAUNCH_REG_RECORD;  
 ```
@@ -414,7 +416,7 @@ typedef struct _FSP_LAUNCH_REG_RECORD {
 <br/>
 <p align="center">
 <sub>
-Copyright © 2015-2020 Bill Zissimopoulos
+Copyright © 2015-2021 Bill Zissimopoulos
 <br/>
 Generated with <a href="https://github.com/billziss-gh/prettydoc">prettydoc</a>
 </sub>

doc/WinFsp-API-winfsp.h.md

@@ -83,6 +83,8 @@ STATUS\_SUCCESS or error code.
 
 **Discussion**
 
+(NOTE: use of this function is not recommended; use Delete instead.)
+
 This function tests whether a file or directory can be safely deleted. This function does
 not need to perform access checks, but may performs tasks such as check for empty
 directories, etc.
@@ -100,6 +102,7 @@ most file systems need only implement the CanDelete operation.
 
 - Cleanup
 - SetDelete
+- Delete
 
 
 </blockquote>
@@ -129,6 +132,9 @@ VOID ( *Cleanup)(
 
 **Discussion**
 
+(NOTE: use of this function with the FspCleanupDelete flag is not recommended;
+use Delete instead.)
+
 When CreateFile is used to open or create a file the kernel creates a kernel mode file
 object (type FILE\_OBJECT) and a handle for it, which it returns to user-mode. The handle may
 be duplicated (using DuplicateHandle), but all duplicate handles always refer to the same
@@ -179,6 +185,7 @@ the file was modified/deleted.
 - Close
 - CanDelete
 - SetDelete
+- Delete
 
 
 </blockquote>
@@ -368,6 +375,90 @@ may contain extended attributes or a reparse point.
 NOTE: If both Create and CreateEx are defined, CreateEx takes precedence.
 
 
+</blockquote>
+</details>
+
+<details>
+<summary>
+<b>Delete</b> - Set the file delete flag or delete a file.
+</summary>
+<blockquote>
+<br/>
+
+```c
+NTSTATUS ( *Delete)(
+    FSP_FILE_SYSTEM *FileSystem, 
+    PVOID FileContext,
+    PWSTR FileName,
+    ULONG Flags);  
+```
+
+**Parameters**
+
+- _FileSystem_ \- The file system on which this request is posted.
+- _FileContext_ \- The file context of the file or directory to set the delete flag for.
+- _FileName_ \- The name of the file or directory to set the delete flag for.
+- _Flags_ \- File disposition flags
+
+**Return Value**
+
+STATUS\_SUCCESS or error code.
+
+**Discussion**
+
+This function replaces CanDelete, SetDelete and uses of Cleanup with the FspCleanupDelete flag
+and is recommended for use in all new code.
+
+Due to the complexity of file deletion in the Windows file system this function is used
+in many scenarios. Its usage is controlled by the Flags parameter:
+
+- FILE\_DISPOSITION\_DO\_NOT\_DELETE: Unmark the file for deletion.
+Do **NOT** delete the file either now or at Cleanup time.
+
+
+- FILE\_DISPOSITION\_DELETE: Mark the file for deletion,
+but do **NOT** delete the file. The file will be deleted at Cleanup time
+(via a call to Delete with Flags = -1).
+This function does not need to perform access checks, but may
+performs tasks such as check for empty directories, etc.
+
+
+- FILE\_DISPOSITION\_DELETE | FILE\_DISPOSITION\_POSIX\_SEMANTICS: Delete the file**NOW** using POSIX semantics. Open user mode handles to the file remain valid.
+This case will be received only when FSP\_FSCTL\_VOLUME\_PARAMS :: SupportsPosixUnlinkRename is set.
+
+
+- -1: Delete the file **NOW** using regular Windows semantics.
+Called during Cleanup with no open user mode handles remaining.
+If a file system implements Delete, Cleanup should **NOT** be used for deletion anymore.
+
+
+
+This function gets called in all file deletion scenarios:
+
+- When the DeleteFile or RemoveDirectory API's are used.
+
+
+- When the SetInformationByHandle API with FileDispositionInfo or FileDispositionInfoEx is used.
+
+
+- When a file is opened using FILE\_DELETE\_ON\_CLOSE.
+
+
+- Etc.
+
+
+
+NOTE: Delete takes precedence over CanDelete, SetDelete and Cleanup with the FspCleanupDelete flag.
+This means that if Delete is defined, CanDelete and SetDelete will never be called and
+Cleanup will never be called with the FspCleanupDelete flag.
+
+**See Also**
+
+- Cleanup
+- CanDelete
+- SetDelete
+
+
 </blockquote>
 </details>
 
@@ -1111,6 +1202,8 @@ STATUS\_SUCCESS or error code.
 
 **Discussion**
 
+(NOTE: use of this function is not recommended; use Delete instead.)
+
 This function sets a flag to indicates whether the FSD file should delete a file
 when it is closed. This function does not need to perform access checks, but may
 performs tasks such as check for empty directories, etc.
@@ -1128,6 +1221,7 @@ most file systems need only implement the CanDelete operation.
 
 - Cleanup
 - CanDelete
+- Delete
 
 
 </blockquote>
@@ -1504,6 +1598,47 @@ This is a helper for implementing the GetEa operation.
 - GetEa
 
 
+</blockquote>
+</details>
+
+<details>
+<summary>
+<b>FspFileSystemAddNotifyInfo</b> - Add notify information to a buffer.
+</summary>
+<blockquote>
+<br/>
+
+```c
+FSP_API BOOLEAN FspFileSystemAddNotifyInfo(
+    FSP_FSCTL_NOTIFY_INFO *NotifyInfo, 
+    PVOID Buffer,
+    ULONG Length,
+    PULONG PBytesTransferred);  
+```
+
+**Parameters**
+
+- _NotifyInfo_ \- The notify information to add.
+- _Buffer_ \- Pointer to a buffer that will receive the notify information.
+- _Length_ \- Length of buffer.
+- _PBytesTransferred_ \- [out]
+Pointer to a memory location that will receive the actual number of bytes stored. This should
+be initialized to 0 prior to the first call to FspFileSystemAddNotifyInfo for a particular
+buffer.
+
+**Return Value**
+
+TRUE if the notify information was added, FALSE if there was not enough space to add it.
+
+**Discussion**
+
+This is a helper for filling a buffer to use with FspFileSystemNotify.
+
+**See Also**
+
+- FspFileSystemNotify
+
+
 </blockquote>
 </details>
 
@@ -1851,6 +1986,123 @@ The current operation context is stored in thread local storage. It allows acces
 Request and Response associated with this operation.
 
 
+</blockquote>
+</details>
+
+<details>
+<summary>
+<b>FspFileSystemNotify</b> - Notify Windows that the file system has file changes.
+</summary>
+<blockquote>
+<br/>
+
+```c
+FSP_API NTSTATUS FspFileSystemNotify(
+    FSP_FILE_SYSTEM *FileSystem, 
+    FSP_FSCTL_NOTIFY_INFO *NotifyInfo,
+    SIZE_T Size);  
+```
+
+**Parameters**
+
+- _FileSystem_ \- The file system object.
+- _NotifyInfo_ \- Buffer containing information about file changes.
+- _Size_ \- Size of buffer.
+
+**Return Value**
+
+STATUS\_SUCCESS or error code.
+
+**Discussion**
+
+A file system that wishes to notify Windows about file changes must
+first issue an FspFileSystemBegin call, followed by 0 or more
+FspFileSystemNotify calls, followed by an FspFileSystemNotifyEnd call.
+
+Note that FspFileSystemNotify requires file names to be normalized. A
+normalized file name is one that contains the correct case of all characters
+in the file name.
+
+For case-sensitive file systems all file names are normalized by definition.
+For case-insensitive file systems that implement file name normalization,
+a normalized file name is the one that the file system specifies in the
+response to Create or Open (see also FspFileSystemGetOpenFileInfo). For
+case-insensitive file systems that do not implement file name normalization
+a normalized file name is the upper case version of the file name used
+to open the file.
+
+
+</blockquote>
+</details>
+
+<details>
+<summary>
+<b>FspFileSystemNotifyBegin</b> - Begin notifying Windows that the file system has file changes.
+</summary>
+<blockquote>
+<br/>
+
+```c
+FSP_API NTSTATUS FspFileSystemNotifyBegin(
+    FSP_FILE_SYSTEM *FileSystem,
+    ULONG Timeout);  
+```
+
+**Parameters**
+
+- _FileSystem_ \- The file system object.
+
+**Return Value**
+
+STATUS\_SUCCESS or error code. The error code STATUS\_CANT\_WAIT means that
+a file rename operation is currently in progress and the operation must be
+retried at a later time.
+
+**Discussion**
+
+A file system that wishes to notify Windows about file changes must
+first issue an FspFileSystemBegin call, followed by 0 or more
+FspFileSystemNotify calls, followed by an FspFileSystemNotifyEnd call.
+
+This operation blocks concurrent file rename operations. File rename
+operations may interfere with file notification, because a file being
+notified may also be concurrently renamed. After all file change
+notifications have been issued, you must make sure to call
+FspFileSystemNotifyEnd to allow file rename operations to proceed.
+
+
+</blockquote>
+</details>
+
+<details>
+<summary>
+<b>FspFileSystemNotifyEnd</b> - End notifying Windows that the file system has file changes.
+</summary>
+<blockquote>
+<br/>
+
+```c
+FSP_API NTSTATUS FspFileSystemNotifyEnd(
+    FSP_FILE_SYSTEM *FileSystem);  
+```
+
+**Parameters**
+
+- _FileSystem_ \- The file system object.
+
+**Return Value**
+
+STATUS\_SUCCESS or error code.
+
+**Discussion**
+
+A file system that wishes to notify Windows about file changes must
+first issue an FspFileSystemBegin call, followed by 0 or more
+FspFileSystemNotify calls, followed by an FspFileSystemNotifyEnd call.
+
+This operation allows any blocked file rename operations to proceed.
+
+
 </blockquote>
 </details>
 
@@ -2613,7 +2865,7 @@ in a clean manner by calling this function.
 <br/>
 <p align="center">
 <sub>
-Copyright © 2015-2020 Bill Zissimopoulos
+Copyright © 2015-2021 Bill Zissimopoulos
 <br/>
 Generated with <a href="https://github.com/billziss-gh/prettydoc">prettydoc</a>
 </sub>

doc/WinFsp-Delete-Redesign.asciidoc

@@ -0,0 +1,124 @@
+= WinFsp Delete Redesign
+
+WinFsp has had its Delete functionality redesigned in release 2021.1 Beta3. This redesign unifies all Windows file deletion semantics under a single file system operation that also supports the new POSIX semantics introduced in Windows 10 Redstone 1. The new Delete design is recommended for new file systems, however existing file systems will continue to work without any changes.
+
+== Background
+
+In this section we discuss how file deletion worked in Windows traditionally as well as the changes introduced in recent versions of Windows 10.
+
+=== Traditional File Deletion
+
+The traditional method for deleting a file or directory on Windows involves the following steps:
+
+- Open the file using https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntopenfile[`NtOpenFile`] (or equivalent) with `DELETE` access.
+- Set the "disposition" flag on the file handle using https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntsetinformationfile[`NtSetInformationFile`] with `FileDispositionInformation`. This only marks the file for deletion and does not delete the file.
+- Close the file using https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntclose[`NtClose`] (or equivalent). Provided that there are no other open handles to the file, the file is actually deleted at this stage.
+
+This is the method that https://docs.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-deletefilew[`DeleteFileW`] and https://docs.microsoft.com/en-us/windows/win32/api/fileapi/nf-fileapi-removedirectoryw[`RemoveDirectoryW`] use to delete a file or directory.
+
+An alternative method involves the `FILE_DELETE_ON_CLOSE` flag:
+
+- Open the file using https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntopenfile[`NtOpenFile`] (or equivalent) with the `FILE_DELETE_ON_CLOSE` option.
+- Close the file using https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/ntifs/nf-ntifs-ntclose[`NtClose`] (or equivalent). Provided that there are no other open handles to the file, the file is actually deleted at this stage.
+
+This alternative method does not set the disposition flag and therefore does not have chance to perform any associated checks. An important disposition flag check is whether a directory is empty: attempting to remove a non-empty directory using `FILE_DELETE_ON_CLOSE` will fail silently, because there is no way to communicate a file deletion error from `NtClose`.
+
+In order to better understand those scenarios let's examine what happens within the kernel and the file system driver (FSD).
+
+When the kernel receives a file API call such as `NtOpenFile`, it packages the call arguments into a data structure called an "I/O Request Packet" (IRP) and forwards it to the appropriate FSD. Each IRP contains a field that describes its function, for example, `IRP_MJ_CREATE` for `NtOpenFile` and `IRP_MJ_SET_INFORMATION` for `NtSetInformationFile`.
+
+With this knowledge we can now examine what happens in the `DeleteFileW` / `RemoveDirectoryW` scenario:
+
+- Open the file using `NtOpenFile`: The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-create[`IRP_MJ_CREATE`] IRP, places inside it a newly created https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/wdm/ns-wdm-_file_object[`FILE_OBJECT`] and forwards it to the FSD. If opening the file succeeds, the kernel will also create a `HANDLE` that is used to refer to this `FILE_OBJECT`; if opening the file fails, this `FILE_OBJECT` will be destroyed.
+- Set the "disposition" flag on the file handle using `NtSetInformationFile` with `FileDispositionInformation`: The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-set-information[`IRP_MJ_SET_INFORMATION`] IRP and passes the `FileDispositionInformation` information in it. The FSD performs some checks (e.g. if a directory is empty) and if they succeed it marks the file for deletion.
+- Close the file using `NtClose`: The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-cleanup[`IRP_MJ_CLEANUP`] IRP, which denotes that all ``HANDLE``s that refer to a `FILE_OBJECT` are closed. (It is possible to have multiple ``HANDLE``s to the same `FILE_OBJECT` by using an API such as https://docs.microsoft.com/en-us/windows/win32/api/handleapi/nf-handleapi-duplicatehandle[`DuplicateHandle`].) The FSD checks and if this is the last `FILE_OBJECT` cleaned up for the file and if the file is marked for deletion, it deletes the file. Traditionally there was no way to return an error from `IRP_MJ_CLEANUP`.
+- Notice that while the file is closed from the perspective of user mode, it is not closed from the perspective of kernel mode. The kernel and the FSD maintain both a handle count and a reference count for the `FILE_OBJECT`. When the handle count goes to `0` then an `IRP_MJ_CLEANUP` IRP is issued (see above). When the reference count goes to `0` then a different https://docs.microsoft.com/en-us/windows-hardware/drivers/kernel/irp-mj-close[`IRP_MJ_CLOSE`] IRP is issued to the FSD. This signifies to the FSD that the `FILE_OBJECT` is going away and the file is fully closed (including from the kernel perspective). There is no way to return an error from `IRP_MJ_CLOSE`.
+
+The situation is similar in the `FILE_DELETE_ON_CLOSE` scenario, with the important difference that the FSD marks the file for deletion immediately upon receiving the `IRP_MJ_CREATE` IRP and that it never receives the `IRP_MJ_SET_INFORMATION` IRP. As before the actual deletion happens in `IRP_MJ_CLEANUP` and only when the last `HANDLE` to the file is closed.
+
+Some important takeaways:
+
+- It is possible for a file to already be open when a `DeleteFileW` / `RemoveDirectoryW` (or equivalent sequence of `NtOpenFile`, `NtSetInformationFile`, `NtClose`, etc.) is executed. This means that the file may NOT be deleted upon return from the `DeleteFileW` / `RemoveDirectoryW` call even though these API's report success. **Traditionally a successful return from `DeleteFileW` / `RemoveDirectory` signifies only that the file or directory has been successfully marked for deletion and not that it has been deleted!**
+- The `NtClose` call does not return error codes from `IRP_MJ_CLEANUP`. This means that it is impossible for user mode to know whether a file marked for deletion was deleted or not.
+- The `FILE_OBJECT` remains valid even after a file has been deleted in `IRP_MJ_CLEANUP`. It is therefore possible to receive additional I/O (e.g. read/write) on the file. Many Windows file systems (including at least some versions of NTFS) do not handle this case very well.
+
+=== File Deletion in Recent Versions of Windows 10
+
+In Windows 10 Redstone 1 Microsoft introduced the `FileDispositionInformationEx` information class. This new information class can be used to request POSIX semantics for file deletion during the `NtSetInformationFile` call. POSIX semantics for file deletion mean that when a file is deleted any open handles to it remain valid and can be used for I/O such as read/write.
+
+Some time later (unclear exactly when) Microsoft changed the `DeleteFileW` / `RemoveDirectoryW` API's to use the `FileDispositionInformationEx` information class and only if this fails (e.g. because the file system is not capable) fall back to the old `FileDispositionInformation` information class. With this change `DeleteFileW` and `RemoveDirectoryW` actually delete the file or directory rather than simply mark it for deletion. (This change is in general a good thing, but can create incompatibility problems for applications that expect the traditional behavior.)
+
+Let's examine the `DeleteFileW` / `RemoveDirectoryW` scenario again:
+
+- Open the file using `NtOpenFile`: The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-create[`IRP_MJ_CREATE`] IRP, places inside it a newly created https://docs.microsoft.com/en-us/windows-hardware/drivers/ddi/wdm/ns-wdm-_file_object[`FILE_OBJECT`] and forwards it to the FSD. If opening the file succeeds, the kernel will also create a `HANDLE` that is used to refer to this `FILE_OBJECT`; if opening the file fails, this `FILE_OBJECT` will be destroyed.
+- Intruct the file system to delete the file with POSIX semantics using `NtSetInformationFile` with `FileDispositionInformationEx`. The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-set-information[`IRP_MJ_SET_INFORMATION`] IRP and passes the `FileDispositionInformationEx` information in it. The FSD performs some checks (e.g. if a directory is empty) and if they succeed it deletes the file or directory (as opposed to simply mark it for deletion).
+- Close the file using `NtClose`. The kernel creates an https://docs.microsoft.com/en-us/windows-hardware/drivers/ifs/irp-mj-cleanup[`IRP_MJ_CLEANUP`] IRP, which denotes that all ``HANDLE``s that refer to a `FILE_OBJECT` are closed. The FSD has already deleted the file and does not need to do anything else.
+- As before an `IRP_MJ_CLOSE` IRP will also be sent to the FSD eventually.
+
+Notice that the actual file deletion happens during `NtSetInformationFile` and the return code from this API reports on the success or failure of the file deletion. Thus we no longer have the problems discussed earlier and `DeleteFileW` / `RemoveDirectoryW` correctly report whether the file was deleted or not.
+
+== WinFsp Support for POSIX Unlink
+
+WinFsp gained support for POSIX Unlink (`FileDispositionInformationEx`) and POSIX Rename (`FileRenameInformationEx`) in release 2021.1 Beta3. To enable this support a native or .NET file system must set the `SupportsPosixUnlinkRename` flag when the file system is created. FUSE file systems have this flag enabled by default (but can be disabled with the command line option `-o LegacyUnlinkRename`).
+
+The POSIX Unlink support spurred some changes in the WinFsp native and .NET API's with regards to file deletion. The WinFsp FUSE layer transparently supports these changes.
+
+Prior to release 2021.1 Beta3, user mode file systems handled file deletion by implementing `CanDelete` / `SetDelete` to check the file disposition flag and `Cleanup` with the `FspCleanupDelete` flag to perform the actual file deletion. From release 2021.1 Beta3 forward the recommended method is to use the new `Delete` file system operation to handle all aspects of file deletion.
+
+The new `Delete` operation follows the general pattern below:
+
+[source,c]
+----
+NTSTATUS Delete(FSP_FILE_SYSTEM *FileSystem,
+    PVOID FileContext, PWSTR FileName, ULONG Flags)
+{
+    switch (Flags)
+    {
+    case FILE_DISPOSITION_DO_NOT_DELETE:
+        // set file disposition flag: do not delete file at Cleanup time
+
+    case FILE_DISPOSITION_DELETE:
+        // set file disposition flag: delete file at Cleanup time
+
+    case FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS:
+        // delete file now; open handles to file remain valid
+
+    case -1:
+        // delete file now; called during Cleanup time
+
+    default:
+        return STATUS_INVALID_PARAMETER;
+    }
+}
+----
+
+As can be seen the `Delete` operation handles marking (`FILE_DISPOSITION_DELETE`) and unmarking (`FILE_DISPOSITION_DO_NOT_DELETE`) a file for deletion, performing file deletion with POSIX semantics (`FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS`) and performing file deletion with traditional Windows semantics (`-1`). If the Delete operation is defined it is used instead of `CanDelete` / `SetDelete` and `Cleanup` with the `FspCleanupDelete` flag, even if these operations are also defined.
+
+A sensible implementation of `Delete` might look something similar to the following:
+
+[source,c]
+----
+NTSTATUS Delete(FSP_FILE_SYSTEM *FileSystem,
+    PVOID FileContext, PWSTR FileName, ULONG Flags)
+{
+    switch (Flags)
+    {
+    case FILE_DISPOSITION_DO_NOT_DELETE:
+        return STATUS_SUCCESS;
+
+    case FILE_DISPOSITION_DELETE:
+        if (IsNotEmptyDirectory(FileSystem, FileContext))
+            return STATUS_DIRECTORY_NOT_EMPTY;
+        return STATUS_SUCCESS;
+
+    case FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS:
+    case -1:
+        if (IsNotEmptyDirectory(FileSystem, FileContext))
+            return STATUS_DIRECTORY_NOT_EMPTY;
+        return RealDeleteFileOrDirectory(FileSystem, FileContext);
+
+    default:
+        return STATUS_INVALID_PARAMETER;
+    }
+}
+----

doc/WinFsp-Rebranding.asciidoc

@@ -0,0 +1,59 @@
+= WinFsp Rebranding
+
+If you have a commercial WinFsp license and wish to produce a rebranded version of WinFsp, you can follow the instructions in this document.
+
+== Overview
+
+The WinFsp build is controlled by the file `build\VStudio\version.properties`. The file contains properties that control the final build output in a number of ways. Some of the properties in this file control how the final build product is branded, others how it is versioned, etc.
+
+=== Branding
+
+The properties that control branding are the following:
+
+* `MyProductName`: This is the overall product name. It should be a short name without spaces. For example: `MyCompanyFSP`. The default value is `WinFsp`.
+
+* `MyProductFileName`: This is the file name that will be used for the primary WinFsp components. For example: if you use `mycompanyfsp` the FSD will be named `mycompanyfsp-x64.sys` and `mycompanyfsp-x86.sys`, the DLL will be named `mycompanyfsp-x64.dll` and `mycompanyfsp-x86.dll`, etc. The default value is `winfsp`. (Note that due to a limitation the WinFsp .NET implementation assumes that `MyProductFileName` is the lowercase version of `MyProductName`.)
+
+* `MyDescription`: This is a longer product description. For example: `MyCompany File System Proxy`. The default value is `Windows File System Proxy`.
+
+* `MyCompanyName`: This is the company name.
+
+* `MyCopyright`: This is the product's copyright.
+
+* `MyFspFsctlDeviceClassGuid`, `MyFspFsvrtDeviceClassGuid`: When creating devices the FSD needs to assign GUID classes to them; it uses the GUIDs specified by these properties. You MUST change these GUIDs when rebranding; otherwise your product and "official" WinFsp releases may interfere with each other. From the Visual Studio main menu use Tools > Create GUID and select option "3. static const struct GUID" to produce GUIDs in the correct format.
+
+=== Versioning
+
+The properties that control versioning are the following:
+
+* `MyCanonicalVersion`: This is the "canonical" (i.e. non-marketing) version of the product. WinFsp uses a `major.minor.build` versioning scheme. The `major.minor` portion of the version comes from this property; build numbers are computed automatically from the current date.
+
+** Some WinFsp components check that canonical versions of different components match. For example, the WinFsp .NET implementation checks that its major version matches the one from the WinFsp DLL.
+
+* `MyProductVersion`: This is the product (i.e. marketing) version of the product. WinFsp uses the release year as the product version; it also adds a point release for subsequent releases (thus 2021 is the first release in 2021, and 2021.1 is the second release, etc). This property may be an arbitrary string.
+
+* `MyProductStage`: This specifies the kind of the build. Allowed values are `Beta`, `RC` (Release Candidate) and `Gold` (Final).
+
+== Limitations
+
+Currently WinFsp supports rebranding of the core WinFsp components:
+
+* The WinFsp FSD (File System Driver).
+
+* The WinFsp DLL (user mode DLL). This includes the DLL import libraries.
+
+* The WinFsp Launcher (Windows service that allows for easy launching of file systems).
+
+Currently WinFsp does not support rebranding of the following components:
+
+* Development files such as header files, samples, etc. These are not end-user visible and therefore are not necessary to be rebranded.
+
+* WinFsp test suites.
+
+* FUSE for Cygwin.
+
+* Chocolatey builds.
+
+Additional limitations:
+
+* The default installer (in file `build\VStudio\installer\Product.wxs`) contains a number of GUIDs. These MUST be changed if the default installer is used by a rebranded product; otherwise installation of your product and "official" WinFsp releases may interfere with each other. There is a Python script at `tools\gensrc\wixguid.py` that can help with this.

ext/tlib/callstack.c

@@ -1,7 +1,7 @@
 /**
  * @file tlib/callstack.c
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #include <tlib/callstack.h>

ext/tlib/callstack.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/callstack.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #ifndef TLIB_CALLSTACK_H_INCLUDED

ext/tlib/injected/allfunc.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injected/allfunc.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #ifndef TLIB_INJECTED_ALLFUNC_H_INCLUDED

ext/tlib/injected/curlfunc.c

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injected/curlfunc.c
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #include <tlib/injected/curlfunc.h>

ext/tlib/injected/curlfunc.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injected/curlfunc.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #ifndef TLIB_INJECTED_CURLFUNC_H_INCLUDED

ext/tlib/injected/stdfunc.c

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injected/stdfunc.c
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #include <tlib/injected/stdfunc.h>

ext/tlib/injected/stdfunc.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injected/stdfunc.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #ifndef TLIB_INJECTED_STDFUNC_H_INCLUDED

ext/tlib/injection.c

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injection.c
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #include <tlib/injection.h>

ext/tlib/injection.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/injection.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 /* NOTE: This header may usefully be included multiple times.

ext/tlib/testsuite.c

@@ -1,7 +1,7 @@
 /**
  * @file tlib/testsuite.c
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #include <tlib/testsuite.h>

ext/tlib/testsuite.h

@@ -1,7 +1,7 @@
 /**
  * @file tlib/testsuite.h
  *
- * @copyright 2014-2020 Bill Zissimopoulos
+ * @copyright 2014-2021 Bill Zissimopoulos
  */
 
 #ifndef TLIB_TESTSUITE_H_INCLUDED

inc/fuse/fuse.h

@@ -6,7 +6,7 @@
  *     FUSE: Filesystem in Userspace
  *     Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -79,7 +79,7 @@ struct fuse_operations
     /* S */ int (*fsyncdir)(const char *path, int datasync, struct fuse_file_info *fi);
     /* S */ void *(*init)(struct fuse_conn_info *conn);
     /* S */ void (*destroy)(void *data);
-    /* _ */ int (*access)(const char *path, int mask);
+    /* S */ int (*access)(const char *path, int mask);
     /* S */ int (*create)(const char *path, fuse_mode_t mode, struct fuse_file_info *fi);
     /* S */ int (*ftruncate)(const char *path, fuse_off_t off, struct fuse_file_info *fi);
     /* S */ int (*fgetattr)(const char *path, struct fuse_stat *stbuf, struct fuse_file_info *fi);

inc/fuse/fuse_common.h

@@ -6,7 +6,7 @@
  *     FUSE: Filesystem in Userspace
  *     Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -54,6 +54,7 @@ extern "C" {
 #define FSP_FUSE_CAP_READDIR_PLUS       (1 << 21)   /* file system supports enhanced readdir */
 #define FSP_FUSE_CAP_READ_ONLY          (1 << 22)   /* file system is marked read-only */
 #define FSP_FUSE_CAP_STAT_EX            (1 << 23)   /* file system supports fuse_stat_ex */
+#define FSP_FUSE_CAP_DELETE_ACCESS      (1 << 24)   /* file system supports access with DELETE_OK */
 #define FSP_FUSE_CAP_CASE_INSENSITIVE   FUSE_CAP_CASE_INSENSITIVE
 
 #define FUSE_IOCTL_COMPAT               (1 << 0)
@@ -79,6 +80,9 @@ extern "C" {
 #define UF_ARCHIVE                      FSP_FUSE_UF_ARCHIVE
 #endif
 
+/* delete access */
+#define FSP_FUSE_DELETE_OK              0x40000000
+
 /* notify extension */
 #define FSP_FUSE_NOTIFY_MKDIR           0x0001
 #define FSP_FUSE_NOTIFY_RMDIR           0x0002

inc/fuse/fuse_opt.h

@@ -6,7 +6,7 @@
  *     FUSE: Filesystem in Userspace
  *     Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/fuse/winfsp_fuse.h

@@ -2,7 +2,7 @@
  * @file fuse/winfsp_fuse.h
  * WinFsp FUSE compatible API.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/fuse3/fuse.h

@@ -6,7 +6,7 @@
  *     FUSE: Filesystem in Userspace
  *     Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/fuse3/fuse_common.h

@@ -6,7 +6,7 @@
  *     FUSE: Filesystem in Userspace
  *     Copyright (C) 2001-2007  Miklos Szeredi <miklos@szeredi.hu>
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/fuse3/fuse_opt.h

@@ -2,7 +2,7 @@
  * @file fuse3/fuse_opt.h
  * WinFsp FUSE3 compatible API.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/fuse3/winfsp_fuse.h

@@ -2,7 +2,7 @@
  * @file fuse3/winfsp_fuse.h
  * WinFsp FUSE3 compatible API.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

inc/winfsp/fsctl.h

@@ -1,7 +1,7 @@
 /**
  * @file winfsp/fsctl.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -35,17 +35,36 @@ extern "C" {
 #define FSP_FSCTL_STATIC_ASSERT(e,m)    static_assert(1,"")
 #endif
 
-#define FSP_FSCTL_DRIVER_NAME           "WinFsp"
-#define FSP_FSCTL_DISK_DEVICE_NAME      "WinFsp.Disk"
-#define FSP_FSCTL_NET_DEVICE_NAME       "WinFsp.Net"
-#define FSP_FSCTL_MUP_DEVICE_NAME       "WinFsp.Mup"
+#define FSP_FSCTL_STR(x)                FSP_FSCTL_STR_(x)
+#define FSP_FSCTL_STR_(x)               #x
+#if defined(MyProductName)
+#define FSP_FSCTL_PRODUCT_NAME          FSP_FSCTL_STR(MyProductName)
+#else
+#define FSP_FSCTL_PRODUCT_NAME          "WinFsp"
+#endif
+#if defined(MyProductFileName)
+#define FSP_FSCTL_PRODUCT_FILE_NAME     FSP_FSCTL_STR(MyProductFileName)
+#else
+#define FSP_FSCTL_PRODUCT_FILE_NAME     "winfsp"
+#endif
 
-// {6F9D25FA-6DEE-4A9D-80F5-E98E14F35E54}
+#define FSP_FSCTL_DRIVER_NAME           FSP_FSCTL_PRODUCT_NAME
+#define FSP_FSCTL_DISK_DEVICE_NAME      FSP_FSCTL_DRIVER_NAME ".Disk"
+#define FSP_FSCTL_NET_DEVICE_NAME       FSP_FSCTL_DRIVER_NAME ".Net"
+#define FSP_FSCTL_MUP_DEVICE_NAME       FSP_FSCTL_DRIVER_NAME ".Mup"
+
+#if defined(MyFspFsctlDeviceClassGuid)
+extern const __declspec(selectany) GUID FspFsctlDeviceClassGuid = MyFspFsctlDeviceClassGuid;
+#else
 extern const __declspec(selectany) GUID FspFsctlDeviceClassGuid =
     { 0x6f9d25fa, 0x6dee, 0x4a9d, { 0x80, 0xf5, 0xe9, 0x8e, 0x14, 0xf3, 0x5e, 0x54 } };
-// {B48171C3-DD50-4852-83A3-344C50D93B17}
+#endif
+#if defined(MyFspFsvrtDeviceClassGuid)
+extern const __declspec(selectany) GUID FspFsvrtDeviceClassGuid = MyFspFsvrtDeviceClassGuid;
+#else
 extern const __declspec(selectany) GUID FspFsvrtDeviceClassGuid =
     { 0xb48171c3, 0xdd50, 0x4852, { 0x83, 0xa3, 0x34, 0x4c, 0x50, 0xd9, 0x3b, 0x17 } };
+#endif
 
 /* alignment macros */
 #define FSP_FSCTL_ALIGN_UP(x, s)        (((x) + ((s) - 1L)) & ~((s) - 1L))
@@ -66,6 +85,8 @@ extern const __declspec(selectany) GUID FspFsvrtDeviceClassGuid =
     CTL_CODE(FILE_DEVICE_FILE_SYSTEM, 0x800 + 't', METHOD_OUT_DIRECT, FILE_ANY_ACCESS)
 #define FSP_FSCTL_STOP                  \
     CTL_CODE(FILE_DEVICE_FILE_SYSTEM, 0x800 + 'S', METHOD_BUFFERED, FILE_ANY_ACCESS)
+#define FSP_FSCTL_STOP0                 \
+    CTL_CODE(FILE_DEVICE_FILE_SYSTEM, 0x800 + 's', METHOD_BUFFERED, FILE_ANY_ACCESS)
 #define FSP_FSCTL_NOTIFY                \
     CTL_CODE(FILE_DEVICE_FILE_SYSTEM, 0x800 + 'n', METHOD_NEITHER, FILE_ANY_ACCESS)
 
@@ -183,7 +204,8 @@ enum
     UINT32 WslFeatures:1;                   /* support features required for WSLinux */\
     UINT32 DirectoryMarkerAsNextOffset:1;   /* directory marker is next offset instead of last name */\
     UINT32 RejectIrpPriorToTransact0:1;     /* reject IRP's prior to FspFsctlTransact with 0 buffers */\
-    UINT32 KmReservedFlags:3;\
+    UINT32 SupportsPosixUnlinkRename:1;     /* file system supports POSIX-style unlink and rename */\
+    UINT32 KmReservedFlags:2;\
     WCHAR Prefix[FSP_FSCTL_VOLUME_PREFIX_SIZE / sizeof(WCHAR)]; /* UNC prefix (\Server\Share) */\
     WCHAR FileSystemName[FSP_FSCTL_VOLUME_FSNAME_SIZE / sizeof(WCHAR)];
 #define FSP_FSCTL_VOLUME_PARAMS_V1_FIELD_DEFN\
@@ -392,6 +414,10 @@ typedef struct
                     UINT32 Delete:1;
                 } Disposition;
                 struct
+                {
+                    UINT32 Flags;
+                } DispositionEx;
+                struct
                 {
                     UINT64 FileSize;
                 } EndOfFile;
@@ -400,6 +426,12 @@ typedef struct
                     FSP_FSCTL_TRANSACT_BUF NewFileName;
                     UINT64 AccessToken; /* request access token (PID,HANDLE) */
                 } Rename;
+                struct
+                {
+                    FSP_FSCTL_TRANSACT_BUF NewFileName;
+                    UINT64 AccessToken; /* request access token (PID,HANDLE) */
+                    UINT32 Flags;
+                } RenameEx;
             } Info;
         } SetInformation;
         struct
@@ -628,6 +660,7 @@ FSP_API NTSTATUS FspFsctlTransact(HANDLE VolumeHandle,
     PVOID RequestBuf, SIZE_T *PRequestBufSize,
     BOOLEAN Batch);
 FSP_API NTSTATUS FspFsctlStop(HANDLE VolumeHandle);
+FSP_API NTSTATUS FspFsctlStop0(HANDLE VolumeHandle);
 FSP_API NTSTATUS FspFsctlNotify(HANDLE VolumeHandle,
     FSP_FSCTL_NOTIFY_INFO *NotifyInfo, SIZE_T Size);
 FSP_API NTSTATUS FspFsctlGetVolumeList(PWSTR DevicePath,

inc/winfsp/launch.h

@@ -5,7 +5,7 @@
  * In order to use the WinFsp Launch API a program must include <winfsp/launch.h>
  * and link with the winfsp_x64.dll (or winfsp_x86.dll) library.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -32,10 +32,10 @@
 extern "C" {
 #endif
 
-#define FSP_LAUNCH_REGKEY               "Software\\WinFsp\\Services"
+#define FSP_LAUNCH_REGKEY               "Software\\" FSP_FSCTL_PRODUCT_NAME "\\Services"
 #define FSP_LAUNCH_REGKEY_WOW64         KEY_WOW64_32KEY
 
-#define FSP_LAUNCH_PIPE_NAME            "\\\\.\\pipe\\WinFsp.{14E7137D-22B4-437A-B0C1-D21D1BDF3767}"
+#define FSP_LAUNCH_PIPE_NAME            "\\\\.\\pipe\\" FSP_FSCTL_PRODUCT_NAME ".{14E7137D-22B4-437A-B0C1-D21D1BDF3767}"
 #define FSP_LAUNCH_PIPE_BUFFER_SIZE     4096
 #define FSP_LAUNCH_PIPE_OWNER           ((PSID)WinLocalSystemSid)
 

inc/winfsp/winfsp.h

@@ -5,7 +5,7 @@
  * In order to use the WinFsp API the user mode file system must include <winfsp/winfsp.h>
  * and link with the winfsp_x64.dll (or winfsp_x86.dll) library.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -47,6 +47,19 @@
 extern "C" {
 #endif
 
+/*
+ * The FILE_DISPOSITION_* definitions appear to be missing from the user mode headers.
+ */
+#if !defined(FILE_DISPOSITION_DELETE)
+#define FILE_DISPOSITION_DO_NOT_DELETE  0x00000000
+#define FILE_DISPOSITION_DELETE         0x00000001
+#define FILE_DISPOSITION_POSIX_SEMANTICS 0x00000002
+/* remaining flags are not needed for user mode file systems but included for completeness */
+#define FILE_DISPOSITION_FORCE_IMAGE_SECTION_CHECK 0x00000004
+#define FILE_DISPOSITION_ON_CLOSE       0x00000008
+#define FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE 0x00000010
+#endif
+
 /*
  * The REPARSE_DATA_BUFFER definitions appear to be missing from the user mode headers.
  */
@@ -91,6 +104,7 @@ typedef struct _REPARSE_DATA_BUFFER
 #if !defined(FILE_NEED_EA)
 #define FILE_NEED_EA                    0x00000080
 #endif
+#if !defined(__MINGW32__)
 typedef struct _FILE_FULL_EA_INFORMATION
 {
     ULONG NextEntryOffset;
@@ -99,6 +113,7 @@ typedef struct _FILE_FULL_EA_INFORMATION
     USHORT EaValueLength;
     CHAR EaName[1];
 } FILE_FULL_EA_INFORMATION, *PFILE_FULL_EA_INFORMATION;
+#endif
 
 /**
  * @group File System
@@ -346,6 +361,9 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
     /**
      * Cleanup a file.
      *
+     * (NOTE: use of this function with the FspCleanupDelete flag is not recommended;
+     * use Delete instead.)
+     *
      * When CreateFile is used to open or create a file the kernel creates a kernel mode file
      * object (type FILE_OBJECT) and a handle for it, which it returns to user-mode. The handle may
      * be duplicated (using DuplicateHandle), but all duplicate handles always refer to the same
@@ -400,6 +418,7 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
      *     Close
      *     CanDelete
      *     SetDelete
+     *     Delete
      */
     VOID (*Cleanup)(FSP_FILE_SYSTEM *FileSystem,
         PVOID FileContext, PWSTR FileName, ULONG Flags);
@@ -573,6 +592,8 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
     /**
      * Determine whether a file or directory can be deleted.
      *
+     * (NOTE: use of this function is not recommended; use Delete instead.)
+     *
      * This function tests whether a file or directory can be safely deleted. This function does
      * not need to perform access checks, but may performs tasks such as check for empty
      * directories, etc.
@@ -597,6 +618,7 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
      * @see
      *     Cleanup
      *     SetDelete
+     *     Delete
      */
     NTSTATUS (*CanDelete)(FSP_FILE_SYSTEM *FileSystem,
         PVOID FileContext, PWSTR FileName);
@@ -878,6 +900,8 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
     /**
      * Set the file delete flag.
      *
+     * (NOTE: use of this function is not recommended; use Delete instead.)
+     *
      * This function sets a flag to indicates whether the FSD file should delete a file
      * when it is closed. This function does not need to perform access checks, but may
      * performs tasks such as check for empty directories, etc.
@@ -906,6 +930,7 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
      * @see
      *     Cleanup
      *     CanDelete
+     *     Delete
      */
     NTSTATUS (*SetDelete)(FSP_FILE_SYSTEM *FileSystem,
         PVOID FileContext, PWSTR FileName, BOOLEAN DeleteFile);
@@ -1038,12 +1063,65 @@ typedef struct _FSP_FILE_SYSTEM_INTERFACE
         PVOID FileContext,
         PFILE_FULL_EA_INFORMATION Ea, ULONG EaLength,
         FSP_FSCTL_FILE_INFO *FileInfo);
+    /**
+     * Set the file delete flag or delete a file.
+     *
+     * This function replaces CanDelete, SetDelete and uses of Cleanup with the FspCleanupDelete flag
+     * and is recommended for use in all new code.
+     *
+     * Due to the complexity of file deletion in the Windows file system this function is used
+     * in many scenarios. Its usage is controlled by the Flags parameter:
+     * <ul>
+     * <li>FILE_DISPOSITION_DO_NOT_DELETE: Unmark the file for deletion.
+     * Do <b>NOT</b> delete the file either now or at Cleanup time.</li>
+     * <li>FILE_DISPOSITION_DELETE: Mark the file for deletion,
+     * but do <b>NOT</b> delete the file. The file will be deleted at Cleanup time
+     * (via a call to Delete with Flags = -1).
+     * This function does not need to perform access checks, but may
+     * performs tasks such as check for empty directories, etc.</li>
+     * <li>FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS: Delete the file
+     * <b>NOW</b> using POSIX semantics. Open user mode handles to the file remain valid.
+     * This case will be received only when FSP_FSCTL_VOLUME_PARAMS :: SupportsPosixUnlinkRename is set.</li>
+     * <li>-1: Delete the file <b>NOW</b> using regular Windows semantics.
+     * Called during Cleanup with no open user mode handles remaining.
+     * If a file system implements Delete, Cleanup should <b>NOT</b> be used for deletion anymore.</li>
+     * </ul>
+     *
+     * This function gets called in all file deletion scenarios:
+     * <ul>
+     * <li>When the DeleteFile or RemoveDirectory API's are used.</li>
+     * <li>When the SetInformationByHandle API with FileDispositionInfo or FileDispositionInfoEx is used.</li>
+     * <li>When a file is opened using FILE_DELETE_ON_CLOSE.</li>
+     * <li>Etc.</li>
+     * </ul>
+     *
+     * NOTE: Delete takes precedence over CanDelete, SetDelete and Cleanup with the FspCleanupDelete flag.
+     * This means that if Delete is defined, CanDelete and SetDelete will never be called and
+     * Cleanup will never be called with the FspCleanupDelete flag.
+     *
+     * @param FileSystem
+     *     The file system on which this request is posted.
+     * @param FileContext
+     *     The file context of the file or directory to set the delete flag for.
+     * @param FileName
+     *     The name of the file or directory to set the delete flag for.
+     * @param Flags
+     *     File disposition flags
+     * @return
+     *     STATUS_SUCCESS or error code.
+     * @see
+     *     Cleanup
+     *     CanDelete
+     *     SetDelete
+     */
+    NTSTATUS (*Delete)(FSP_FILE_SYSTEM *FileSystem,
+        PVOID FileContext, PWSTR FileName, ULONG Flags);
 
     /*
      * This ensures that this interface will always contain 64 function pointers.
      * Please update when changing the interface as it is important for future compatibility.
      */
-    NTSTATUS (*Reserved[33])();
+    NTSTATUS (*Reserved[32])();
 } FSP_FILE_SYSTEM_INTERFACE;
 FSP_FSCTL_STATIC_ASSERT(sizeof(FSP_FILE_SYSTEM_INTERFACE) == 64 * sizeof(NTSTATUS (*)()),
     "FSP_FILE_SYSTEM_INTERFACE must have 64 entries.");
@@ -1381,7 +1459,8 @@ UINT32 FspFileSystemOperationProcessId(VOID)
     case FspFsctlTransactCreateKind:
         return FSP_FSCTL_TRANSACT_REQ_TOKEN_PID(Request->Req.Create.AccessToken);
     case FspFsctlTransactSetInformationKind:
-        if (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass)
+        if (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+            65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass)
             return FSP_FSCTL_TRANSACT_REQ_TOKEN_PID(Request->Req.SetInformation.Info.Rename.AccessToken);
         /* fall through! */
     default:
@@ -2112,9 +2191,9 @@ static inline
 NTSTATUS FspLoad(PVOID *PModule)
 {
 #if defined(_WIN64)
-#define FSP_DLLNAME                     "winfsp-x64.dll"
+#define FSP_DLLNAME                     FSP_FSCTL_PRODUCT_FILE_NAME "-x64.dll"
 #else
-#define FSP_DLLNAME                     "winfsp-x86.dll"
+#define FSP_DLLNAME                     FSP_FSCTL_PRODUCT_FILE_NAME "-x86.dll"
 #endif
 #define FSP_DLLPATH                     "bin\\" FSP_DLLNAME
 
@@ -2142,7 +2221,7 @@ NTSTATUS FspLoad(PVOID *PModule)
     Module = LoadLibraryW(L"" FSP_DLLNAME);
     if (0 == Module)
     {
-        Result = RegOpenKeyExW(HKEY_LOCAL_MACHINE, L"Software\\WinFsp",
+        Result = RegOpenKeyExW(HKEY_LOCAL_MACHINE, L"Software\\" FSP_FSCTL_PRODUCT_NAME,
             0, KEY_READ | KEY_WOW64_32KEY, &RegKey);
         if (ERROR_SUCCESS == Result)
         {

inc/winfsp/winfsp.hpp

@@ -2,7 +2,7 @@
  * @file winfsp/winfsp.hpp
  * WinFsp C++ Layer.
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -649,7 +649,7 @@ public:
     NTSTATUS Preflight(PWSTR MountPoint)
     {
         return FspFileSystemPreflight(
-            _VolumeParams.Prefix[0] ? L"WinFsp.Net" : L"WinFsp.Disk",
+            _VolumeParams.Prefix[0] ? L"" FSP_FSCTL_NET_DEVICE_NAME : L"" FSP_FSCTL_DISK_DEVICE_NAME,
             MountPoint);
     }
     NTSTATUS Mount(PWSTR MountPoint,
@@ -669,7 +669,7 @@ public:
         if (!NT_SUCCESS(Result))
             return Result;
         Result = FspFileSystemCreate(
-            _VolumeParams.Prefix[0] ? L"WinFsp.Net" : L"WinFsp.Disk",
+            _VolumeParams.Prefix[0] ? L"" FSP_FSCTL_NET_DEVICE_NAME : L"" FSP_FSCTL_DISK_DEVICE_NAME,
             &_VolumeParams, Interface(), &_FileSystemPtr);
         if (!NT_SUCCESS(Result))
             return Result;

opt/cygfuse/fuse/cygfuse.c

@@ -1,7 +1,7 @@
 /**
  * @file fuse/cygfuse.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

opt/cygfuse/fuse3/cygfuse.c

@@ -1,7 +1,7 @@
 /**
  * @file fuse3/cygfuse.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

opt/fsext/inc/winfsp/fsext.h

@@ -1,7 +1,7 @@
 /**
  * @file winfsp/fsext.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/debug.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/debug.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -477,6 +477,18 @@ FSP_API VOID FspDebugLogRequest(FSP_FSCTL_TRANSACT_REQ *Request)
                     UserContextBuf),
                 Request->Req.SetInformation.Info.Disposition.Delete ? "Delete" : "Undelete");
             break;
+        case 64/*FileDispositionInformationEx*/:
+            FspDebugLog("%S[TID=%04lx]: %p: >>SetInformation [DispositionEx] %s%S%s%s, "
+                "Flags=%lx\n",
+                FspDiagIdent(), GetCurrentThreadId(), (PVOID)Request->Hint,
+                Request->FileName.Size ? "\"" : "",
+                Request->FileName.Size ? (PWSTR)Request->Buffer : L"",
+                Request->FileName.Size ? "\", " : "",
+                FspDebugLogUserContextString(
+                    Request->Req.SetInformation.UserContext, Request->Req.SetInformation.UserContext2,
+                    UserContextBuf),
+                Request->Req.SetInformation.Info.DispositionEx.Flags);
+            break;
         case 10/*FileRenameInformation*/:
             FspDebugLog("%S[TID=%04lx]: %p: >>SetInformation [Rename] %s%S%s%s, "
                 "NewFileName=\"%S\", AccessToken=%p[PID=%lx]\n",
@@ -491,6 +503,21 @@ FSP_API VOID FspDebugLogRequest(FSP_FSCTL_TRANSACT_REQ *Request)
                 FSP_FSCTL_TRANSACT_REQ_TOKEN_HANDLE(Request->Req.SetInformation.Info.Rename.AccessToken),
                 FSP_FSCTL_TRANSACT_REQ_TOKEN_PID(Request->Req.SetInformation.Info.Rename.AccessToken));
             break;
+        case 65/*FileRenameInformationEx*/:
+            FspDebugLog("%S[TID=%04lx]: %p: >>SetInformation [RenameEx] %s%S%s%s, "
+                "NewFileName=\"%S\", AccessToken=%p[PID=%lx], Flags=%lx\n",
+                FspDiagIdent(), GetCurrentThreadId(), (PVOID)Request->Hint,
+                Request->FileName.Size ? "\"" : "",
+                Request->FileName.Size ? (PWSTR)Request->Buffer : L"",
+                Request->FileName.Size ? "\", " : "",
+                FspDebugLogUserContextString(
+                    Request->Req.SetInformation.UserContext, Request->Req.SetInformation.UserContext2,
+                    UserContextBuf),
+                (PWSTR)(Request->Buffer + Request->Req.SetInformation.Info.Rename.NewFileName.Offset),
+                FSP_FSCTL_TRANSACT_REQ_TOKEN_HANDLE(Request->Req.SetInformation.Info.Rename.AccessToken),
+                FSP_FSCTL_TRANSACT_REQ_TOKEN_PID(Request->Req.SetInformation.Info.Rename.AccessToken),
+                Request->Req.SetInformation.Info.RenameEx.Flags);
+            break;
         default:
             FspDebugLog("%S[TID=%04lx]: %p: >>SetInformation [INVALID] %s%S%s%s\n",
                 FspDiagIdent(), GetCurrentThreadId(), (PVOID)Request->Hint,

src/dll/dirbuf.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/dirbuf.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/eventlog.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/eventlog.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fs.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fs.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -349,7 +349,7 @@ exit:
 
     FspFileSystemSetDispatcherResult(FileSystem, Result);
 
-    FspFsctlStop(FileSystem->VolumeHandle);
+    FspFsctlStop0(FileSystem->VolumeHandle);
 
     if (0 != DispatcherThread)
     {
@@ -398,11 +398,13 @@ FSP_API VOID FspFileSystemStopDispatcher(FSP_FILE_SYSTEM *FileSystem)
     if (0 == FileSystem->DispatcherThread)
         return;
 
-    FspFsctlStop(FileSystem->VolumeHandle);
+    FspFsctlStop0(FileSystem->VolumeHandle);
 
     WaitForSingleObject(FileSystem->DispatcherThread, INFINITE);
     CloseHandle(FileSystem->DispatcherThread);
     FileSystem->DispatcherThread = 0;
+
+    FspFsctlStop(FileSystem->VolumeHandle);
 }
 
 FSP_API VOID FspFileSystemSendResponse(FSP_FILE_SYSTEM *FileSystem,
@@ -423,7 +425,7 @@ FSP_API VOID FspFileSystemSendResponse(FSP_FILE_SYSTEM *FileSystem,
     {
         FspFileSystemSetDispatcherResult(FileSystem, Result);
 
-        FspFsctlStop(FileSystem->VolumeHandle);
+        FspFsctlStop0(FileSystem->VolumeHandle);
     }
 }
 

src/dll/fsctl.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fsctl.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -161,6 +161,16 @@ FSP_API NTSTATUS FspFsctlStop(HANDLE VolumeHandle)
     return STATUS_SUCCESS;
 }
 
+FSP_API NTSTATUS FspFsctlStop0(HANDLE VolumeHandle)
+{
+    DWORD Bytes;
+
+    if (!DeviceIoControl(VolumeHandle, FSP_FSCTL_STOP0, 0, 0, 0, 0, &Bytes, 0))
+        return FspNtStatusFromWin32(GetLastError());
+
+    return STATUS_SUCCESS;
+}
+
 FSP_API NTSTATUS FspFsctlNotify(HANDLE VolumeHandle,
     FSP_FSCTL_NOTIFY_INFO *NotifyInfo, SIZE_T Size)
 {

src/dll/fsop.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fsop.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -56,7 +56,10 @@ FSP_API NTSTATUS FspFileSystemOpEnter(FSP_FILE_SYSTEM *FileSystem,
             (FspFsctlTransactCleanupKind == Request->Kind &&
                 Request->Req.Cleanup.Delete) ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ == (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactSetVolumeInformationKind == Request->Kind ||
             (FspFsctlTransactFlushBuffersKind == Request->Kind &&
                 0 == Request->Req.FlushBuffers.UserContext &&
@@ -67,7 +70,9 @@ FSP_API NTSTATUS FspFileSystemOpEnter(FSP_FILE_SYSTEM *FileSystem,
         else
         if (FspFsctlTransactCreateKind == Request->Kind ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ != (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactQueryDirectoryKind == Request->Kind ||
             FspFsctlTransactQueryVolumeInformationKind == Request->Kind)
         {
@@ -95,7 +100,10 @@ FSP_API NTSTATUS FspFileSystemOpLeave(FSP_FILE_SYSTEM *FileSystem,
             (FspFsctlTransactCleanupKind == Request->Kind &&
                 Request->Req.Cleanup.Delete) ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ == (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactSetVolumeInformationKind == Request->Kind ||
             (FspFsctlTransactFlushBuffersKind == Request->Kind &&
                 0 == Request->Req.FlushBuffers.UserContext &&
@@ -106,7 +114,9 @@ FSP_API NTSTATUS FspFileSystemOpLeave(FSP_FILE_SYSTEM *FileSystem,
         else
         if (FspFsctlTransactCreateKind == Request->Kind ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ != (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactQueryDirectoryKind == Request->Kind ||
             FspFsctlTransactQueryVolumeInformationKind == Request->Kind)
         {
@@ -373,7 +383,10 @@ NTSTATUS FspFileSystemRenameCheck(FSP_FILE_SYSTEM *FileSystem,
         Request->Req.SetInformation.Info.Rename.NewFileName.Size;
     CreateRequest->Kind = FspFsctlTransactCreateKind;
     CreateRequest->Req.Create.CreateOptions =
-        FILE_DELETE_ON_CLOSE |          /* force read-only check! */
+        (65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+        0 != (0x40/*IGNORE_READONLY_ATTRIBUTE*/ & Request->Req.SetInformation.Info.RenameEx.Flags) ?
+            0 :
+            FILE_DELETE_ON_CLOSE) |     /* force read-only check! */
         FILE_OPEN_REPARSE_POINT;        /* allow rename over reparse point */
     CreateRequest->Req.Create.AccessToken = Request->Req.SetInformation.Info.Rename.AccessToken;
     CreateRequest->Req.Create.UserMode = TRUE;
@@ -978,16 +991,37 @@ FSP_API NTSTATUS FspFileSystemOpOverwrite(FSP_FILE_SYSTEM *FileSystem,
 FSP_API NTSTATUS FspFileSystemOpCleanup(FSP_FILE_SYSTEM *FileSystem,
     FSP_FSCTL_TRANSACT_REQ *Request, FSP_FSCTL_TRANSACT_RSP *Response)
 {
-    if (0 != FileSystem->Interface->Cleanup)
-        FileSystem->Interface->Cleanup(FileSystem,
-            (PVOID)ValOfFileContext(Request->Req.Cleanup),
-            0 != Request->FileName.Size ? (PWSTR)Request->Buffer : 0,
+    ULONG CleanupFlags =
         (0 != Request->Req.Cleanup.Delete ? FspCleanupDelete : 0) |
         (0 != Request->Req.Cleanup.SetAllocationSize ? FspCleanupSetAllocationSize : 0) |
         (0 != Request->Req.Cleanup.SetArchiveBit ? FspCleanupSetArchiveBit : 0) |
         (0 != Request->Req.Cleanup.SetLastAccessTime ? FspCleanupSetLastAccessTime : 0) |
         (0 != Request->Req.Cleanup.SetLastWriteTime ? FspCleanupSetLastWriteTime : 0) |
-            (0 != Request->Req.Cleanup.SetChangeTime ? FspCleanupSetChangeTime : 0));
+        (0 != Request->Req.Cleanup.SetChangeTime ? FspCleanupSetChangeTime : 0);
+
+    if (Request->Req.Cleanup.Delete && 0 != FileSystem->Interface->Delete)
+    {
+        NTSTATUS Result = FileSystem->Interface->Delete(FileSystem,
+            (PVOID)ValOfFileContext(Request->Req.Cleanup),
+            0 != Request->FileName.Size ? (PWSTR)Request->Buffer : 0,
+            (ULONG)-1);
+        /*
+         * If Delete returns STATUS_NOT_IMPLEMENTED it means that it is unable
+         * to handle file deletion during the Cleanup phase. In this case we
+         * will handle file deletion in Cleanup with the FspCleanupDelete flag.
+         *
+         * This is necessary for file systems like the .NET layer where Delete
+         * may be implemented but unable to handle all file deletion cases.
+         */
+        if (STATUS_NOT_IMPLEMENTED != Result)
+            CleanupFlags &= ~FspCleanupDelete;
+    }
+
+    if (0 != FileSystem->Interface->Cleanup)
+        FileSystem->Interface->Cleanup(FileSystem,
+            (PVOID)ValOfFileContext(Request->Req.Cleanup),
+            0 != Request->FileName.Size ? (PWSTR)Request->Buffer : 0,
+            CleanupFlags);
 
     return STATUS_SUCCESS;
 }
@@ -1134,7 +1168,9 @@ FSP_API NTSTATUS FspFileSystemOpSetInformation(FSP_FILE_SYSTEM *FileSystem,
                 &FileInfo);
         break;
     case 13/*FileDispositionInformation*/:
-        if (0 != FileSystem->Interface->GetFileInfo)
+    case 64/*FileDispositionInformationEx*/:
+        if (0 == (0x10/*IGNORE_READONLY_ATTRIBUTE*/ & Request->Req.SetInformation.Info.DispositionEx.Flags) &&
+            0 != FileSystem->Interface->GetFileInfo)
         {
             Result = FileSystem->Interface->GetFileInfo(FileSystem,
                 (PVOID)ValOfFileContext(Request->Req.SetInformation), &FileInfo);
@@ -1144,7 +1180,17 @@ FSP_API NTSTATUS FspFileSystemOpSetInformation(FSP_FILE_SYSTEM *FileSystem,
                 break;
             }
         }
-        if (0 != FileSystem->Interface->SetDelete)
+        if (0 != FileSystem->Interface->Delete)
+        {
+            Result = FileSystem->Interface->Delete(FileSystem,
+                (PVOID)ValOfFileContext(Request->Req.SetInformation),
+                (PWSTR)Request->Buffer,
+                Request->Req.SetInformation.Info.DispositionEx.Flags & 3/*DELETE|POSIX_SEMANTICS*/);
+        }
+        else if (0 != (2/*POSIX_SEMANTICS*/ & Request->Req.SetInformation.Info.DispositionEx.Flags))
+            /* only FSP_FILE_SYSTEM_INTERFACE::Delete can do POSIX semantics; return error if unimplemented */
+            Result = STATUS_INVALID_PARAMETER;
+        else if (0 != FileSystem->Interface->SetDelete)
         {
             Result = FileSystem->Interface->SetDelete(FileSystem,
                 (PVOID)ValOfFileContext(Request->Req.SetInformation),
@@ -1162,6 +1208,7 @@ FSP_API NTSTATUS FspFileSystemOpSetInformation(FSP_FILE_SYSTEM *FileSystem,
         }
         break;
     case 10/*FileRenameInformation*/:
+    case 65/*FileRenameInformationEx*/:
         if (0 != FileSystem->Interface->Rename)
         {
             if (0 != Request->Req.SetInformation.Info.Rename.AccessToken)

src/dll/fuse/fuse.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -96,6 +96,7 @@ static struct fuse_opt fsp_fuse_core_opts[] =
     FSP_FUSE_CORE_OPT("VolumeInfoTimeout=", set_VolumeInfoTimeout, 1),
     FSP_FUSE_CORE_OPT("VolumeInfoTimeout=%d", VolumeParams.VolumeInfoTimeout, 0),
     FSP_FUSE_CORE_OPT("KeepFileCache=", set_KeepFileCache, 1),
+    FSP_FUSE_CORE_OPT("LegacyUnlinkRename=", set_LegacyUnlinkRename, 1),
     FSP_FUSE_CORE_OPT("ThreadCount=%u", ThreadCount, 0),
     FUSE_OPT_KEY("UNC=", 'U'),
     FUSE_OPT_KEY("--UNC=", 'U'),
@@ -421,6 +422,7 @@ static int fsp_fuse_core_opt_proc(void *opt_data0, const char *arg, int key,
             "    -o EaTimeout=N             extended attribute timeout (millis)\n"
             "    -o VolumeInfoTimeout=N     volume info timeout (millis)\n"
             "    -o KeepFileCache           do not discard cache when files are closed\n"
+            "    -o LegacyUnlinkRename      do not support new POSIX unlink/rename\n"
             "    -o ThreadCount             number of file system dispatcher threads\n"
             );
         opt_data->help = 1;
@@ -563,6 +565,7 @@ FSP_FUSE_API struct fuse *fsp_fuse_new(struct fsp_fuse_env *env,
     opt_data.VolumeParams.Version = sizeof(FSP_FSCTL_VOLUME_PARAMS);
     opt_data.VolumeParams.FileInfoTimeout = 1000;
     opt_data.VolumeParams.FlushAndPurgeOnCleanup = TRUE;
+    opt_data.VolumeParams.SupportsPosixUnlinkRename = TRUE;
 
     if (-1 == fsp_fuse_core_opt_parse(env, args, &opt_data, /*help=*/1))
     {
@@ -623,6 +626,8 @@ FSP_FUSE_API struct fuse *fsp_fuse_new(struct fsp_fuse_env *env,
         opt_data.VolumeParams.VolumeInfoTimeoutValid = 1;
     if (opt_data.set_KeepFileCache)
         opt_data.VolumeParams.FlushAndPurgeOnCleanup = FALSE;
+    if (opt_data.set_LegacyUnlinkRename)
+        opt_data.VolumeParams.SupportsPosixUnlinkRename = FALSE;
     opt_data.VolumeParams.CaseSensitiveSearch = TRUE;
     opt_data.VolumeParams.CasePreservedNames = TRUE;
     opt_data.VolumeParams.PersistentAcls = TRUE;

src/dll/fuse/fuse_compat.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse_compat.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse/fuse_intf.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse_intf.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -34,7 +34,10 @@ VOID fsp_fuse_op_enter_lock(FSP_FILE_SYSTEM *FileSystem,
             (FspFsctlTransactCleanupKind == Request->Kind &&
                 Request->Req.Cleanup.Delete) ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ == (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactSetVolumeInformationKind == Request->Kind ||
             (FspFsctlTransactFlushBuffersKind == Request->Kind &&
                 0 == Request->Req.FlushBuffers.UserContext &&
@@ -48,7 +51,9 @@ VOID fsp_fuse_op_enter_lock(FSP_FILE_SYSTEM *FileSystem,
         else
         if (FspFsctlTransactCreateKind == Request->Kind ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ != (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactQueryDirectoryKind == Request->Kind ||
             FspFsctlTransactQueryVolumeInformationKind == Request->Kind ||
             /* FSCTL_GET_REPARSE_POINT may access namespace */
@@ -78,7 +83,10 @@ VOID fsp_fuse_op_leave_unlock(FSP_FILE_SYSTEM *FileSystem,
             (FspFsctlTransactCleanupKind == Request->Kind &&
                 Request->Req.Cleanup.Delete) ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ == (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactSetVolumeInformationKind == Request->Kind ||
             (FspFsctlTransactFlushBuffersKind == Request->Kind &&
                 0 == Request->Req.FlushBuffers.UserContext &&
@@ -92,7 +100,9 @@ VOID fsp_fuse_op_leave_unlock(FSP_FILE_SYSTEM *FileSystem,
         else
         if (FspFsctlTransactCreateKind == Request->Kind ||
             (FspFsctlTransactSetInformationKind == Request->Kind &&
-                13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass) ||
+                (13/*FileDispositionInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+                (64/*FileDispositionInformationEx*/ == Request->Req.SetInformation.FileInformationClass &&
+                    3/*DELETE|POSIX_SEMANTICS*/ != (3 & Request->Req.SetInformation.Info.DispositionEx.Flags)))) ||
             FspFsctlTransactQueryDirectoryKind == Request->Kind ||
             FspFsctlTransactQueryVolumeInformationKind == Request->Kind ||
             /* FSCTL_GET_REPARSE_POINT may access namespace */
@@ -131,7 +141,8 @@ NTSTATUS fsp_fuse_op_enter(FSP_FILE_SYSTEM *FileSystem,
         AccessToken = Request->Req.Create.AccessToken;
     }
     else if (FspFsctlTransactSetInformationKind == Request->Kind &&
-        10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass)
+        (10/*FileRenameInformation*/ == Request->Req.SetInformation.FileInformationClass ||
+        65/*FileRenameInformationEx*/ == Request->Req.SetInformation.FileInformationClass))
     {
         FileName = (PWSTR)(Request->Buffer + Request->Req.SetInformation.Info.Rename.NewFileName.Offset);
         AccessToken = Request->Req.SetInformation.Info.Rename.AccessToken;
@@ -951,12 +962,12 @@ exit:
             if (CreateOptions & FILE_DIRECTORY_FILE)
             {
                 if (0 != f->ops.releasedir)
-                    f->ops.releasedir(filedesc->PosixPath, &fi);
+                    f->ops.releasedir(contexthdr->PosixPath, &fi);
             }
             else
             {
                 if (0 != f->ops.release)
-                    f->ops.release(filedesc->PosixPath, &fi);
+                    f->ops.release(contexthdr->PosixPath, &fi);
             }
         }
 
@@ -980,6 +991,19 @@ static NTSTATUS fsp_fuse_intf_Open(FSP_FILE_SYSTEM *FileSystem,
     int err;
     NTSTATUS Result;
 
+    if (0 != (CreateOptions & FILE_DELETE_ON_CLOSE) &&
+        0 != (f->conn_want & FSP_FUSE_CAP_DELETE_ACCESS) && 0 != f->ops.access)
+    {
+        err = f->ops.access(contexthdr->PosixPath, FSP_FUSE_DELETE_OK);
+        Result = fsp_fuse_ntstatus_from_errno(f->env, err);
+        if (!NT_SUCCESS(Result) && STATUS_INVALID_DEVICE_REQUEST != Result)
+        {
+            if (STATUS_ACCESS_DENIED == Result)
+                Result = STATUS_CANNOT_DELETE;
+            goto exit;
+        }
+    }
+
     Result = fsp_fuse_intf_GetFileInfoEx(FileSystem, contexthdr->PosixPath, 0,
         &Uid, &Gid, &Mode, &FileInfoBuf);
     if (!NT_SUCCESS(Result))
@@ -1157,42 +1181,6 @@ static NTSTATUS fsp_fuse_intf_Overwrite(FSP_FILE_SYSTEM *FileSystem,
         &Uid, &Gid, &Mode, FileInfo);
 }
 
-static VOID fsp_fuse_intf_Cleanup(FSP_FILE_SYSTEM *FileSystem,
-    PVOID FileDesc, PWSTR FileName, ULONG Flags)
-{
-    struct fuse *f = FileSystem->UserContext;
-    struct fsp_fuse_file_desc *filedesc = FileDesc;
-
-    /*
-     * In Windows a DeleteFile/RemoveDirectory is the sequence of the following:
-     *     Create(FILE_OPEN)
-     *     SetInformation(Disposition)
-     *     Cleanup
-     *     Close
-     *
-     * The FSD maintains a count of how many handles are currently open for a file. When the
-     * last handle is closed *and* the disposition flag is set the FSD sends us a Cleanup with
-     * the Delete flag set.
-     *
-     * Notice that when we receive a Cleanup with Delete set there can be no open handles other
-     * than ours. [Even if there is a concurrent Open of this file, the FSD will fail it with
-     * STATUS_DELETE_PENDING.] This means that we do not need to worry about the hard_remove
-     * FUSE option and can safely remove the file at this time.
-     */
-
-    if (Flags & FspCleanupDelete)
-        if (filedesc->IsDirectory && !filedesc->IsReparsePoint)
-        {
-            if (0 != f->ops.rmdir)
-                f->ops.rmdir(filedesc->PosixPath);
-        }
-        else
-        {
-            if (0 != f->ops.unlink)
-                f->ops.unlink(filedesc->PosixPath);
-        }
-}
-
 static VOID fsp_fuse_intf_Close(FSP_FILE_SYSTEM *FileSystem,
     PVOID FileDesc)
 {
@@ -1605,6 +1593,72 @@ static NTSTATUS fsp_fuse_intf_CanDelete(FSP_FILE_SYSTEM *FileSystem,
     return STATUS_SUCCESS;
 }
 
+static NTSTATUS fsp_fuse_intf_Delete(FSP_FILE_SYSTEM *FileSystem,
+    PVOID FileDesc, PWSTR FileName, ULONG Flags)
+{
+    struct fuse *f = FileSystem->UserContext;
+    struct fsp_fuse_file_desc *filedesc = FileDesc;
+    int err;
+    NTSTATUS Result;
+
+    switch (Flags)
+    {
+    case FILE_DISPOSITION_DO_NOT_DELETE:
+        return STATUS_SUCCESS;
+
+    case FILE_DISPOSITION_DELETE:
+        Result = STATUS_SUCCESS;
+        if (0 != (f->conn_want & FSP_FUSE_CAP_DELETE_ACCESS) && 0 != f->ops.access)
+        {
+            err = f->ops.access(filedesc->PosixPath, FSP_FUSE_DELETE_OK);
+            Result = fsp_fuse_ntstatus_from_errno(f->env, err);
+            if (STATUS_INVALID_DEVICE_REQUEST == Result)
+                Result = STATUS_SUCCESS;
+        }
+
+        if (NT_SUCCESS(Result))
+            Result = fsp_fuse_intf_CanDelete(FileSystem, FileDesc, FileName);
+
+        /* when doing unlink/rmdir convert EPERM/EACCES to STATUS_CANNOT_DELETE */
+        if (STATUS_ACCESS_DENIED == Result)
+            Result = STATUS_CANNOT_DELETE;
+
+        return Result;
+
+    case FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS:
+    case -1:
+        if (filedesc->IsDirectory && !filedesc->IsReparsePoint)
+        {
+            if (0 != f->ops.rmdir)
+            {
+                err = f->ops.rmdir(filedesc->PosixPath);
+                Result = fsp_fuse_ntstatus_from_errno(f->env, err);
+            }
+            else
+                Result = STATUS_INVALID_DEVICE_REQUEST;
+        }
+        else
+        {
+            if (0 != f->ops.unlink)
+            {
+                err = f->ops.unlink(filedesc->PosixPath);
+                Result = fsp_fuse_ntstatus_from_errno(f->env, err);
+            }
+            else
+                Result = STATUS_INVALID_DEVICE_REQUEST;
+        }
+
+        /* when doing unlink/rmdir convert EPERM/EACCES to STATUS_CANNOT_DELETE */
+        if (STATUS_ACCESS_DENIED == Result)
+            Result = STATUS_CANNOT_DELETE;
+
+        return Result;
+
+    default:
+        return STATUS_INVALID_PARAMETER;
+    }
+}
+
 static NTSTATUS fsp_fuse_intf_Rename(FSP_FILE_SYSTEM *FileSystem,
     PVOID FileDesc,
     PWSTR FileName, PWSTR NewFileName, BOOLEAN ReplaceIfExists)
@@ -2424,7 +2478,7 @@ FSP_FILE_SYSTEM_INTERFACE fsp_fuse_intf =
     0,
     fsp_fuse_intf_Open,
     0,
-    fsp_fuse_intf_Cleanup,
+    0,
     fsp_fuse_intf_Close,
     fsp_fuse_intf_Read,
     fsp_fuse_intf_Write,
@@ -2432,7 +2486,7 @@ FSP_FILE_SYSTEM_INTERFACE fsp_fuse_intf =
     fsp_fuse_intf_GetFileInfo,
     fsp_fuse_intf_SetBasicInfo,
     fsp_fuse_intf_SetFileSize,
-    fsp_fuse_intf_CanDelete,
+    0,
     fsp_fuse_intf_Rename,
     fsp_fuse_intf_GetSecurity,
     fsp_fuse_intf_SetSecurity,
@@ -2449,6 +2503,7 @@ FSP_FILE_SYSTEM_INTERFACE fsp_fuse_intf =
     fsp_fuse_intf_Overwrite,
     fsp_fuse_intf_GetEa,
     fsp_fuse_intf_SetEa,
+    fsp_fuse_intf_Delete,
 };
 
 /*

src/dll/fuse/fuse_loop.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse_loop.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -88,6 +88,7 @@ static NTSTATUS fsp_fuse_loop_start(struct fuse *f)
         FSP_FUSE_CAP_READDIR_PLUS |
         FSP_FUSE_CAP_READ_ONLY |
         FSP_FUSE_CAP_STAT_EX |
+        FSP_FUSE_CAP_DELETE_ACCESS |
         FSP_FUSE_CAP_CASE_INSENSITIVE;
     if (0 != f->ops.init)
     {

src/dll/fuse/fuse_main.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse_main.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse/fuse_opt.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse_opt.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse/library.h

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/library.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -153,7 +153,8 @@ struct fsp_fuse_core_opt_data
         set_DirInfoTimeout,
         set_EaTimeout,
         set_VolumeInfoTimeout,
-        set_KeepFileCache;
+        set_KeepFileCache,
+        set_LegacyUnlinkRename;
     unsigned ThreadCount;
     FSP_FSCTL_VOLUME_PARAMS VolumeParams;
     UINT16 VolumeLabelLength;

src/dll/fuse3/fuse2to3.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse3/fuse2to3.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse3/fuse3.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse3/fuse3.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse3/fuse3_compat.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse/fuse3_compat.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/fuse3/library.h

@@ -1,7 +1,7 @@
 /**
  * @file dll/fuse3/library.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/launch.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/launch.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/ldap.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/ldap.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/library.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/library.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/library.h

@@ -1,7 +1,7 @@
 /**
  * @file dll/library.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -30,7 +30,7 @@
 
 #include <shared/ku/config.h>
 
-#define LIBRARY_NAME                    "WinFsp"
+#define LIBRARY_NAME                    FSP_FSCTL_PRODUCT_NAME
 
 /* DEBUGLOG */
 #if !defined(NDEBUG)

src/dll/mount.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/mount.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -28,6 +28,29 @@ static NTSTATUS (NTAPI *FspNtMakeTemporaryObject)(
     HANDLE Handle);
 static NTSTATUS (NTAPI *FspNtClose)(
     HANDLE Handle);
+static BOOLEAN FspMountDoNotUseLauncher;
+
+static VOID FspMountInitializeFromRegistry(VOID)
+{
+    HKEY RegKey;
+    LONG Result;
+    DWORD Size;
+    DWORD MountDoNotUseLauncher;
+
+    MountDoNotUseLauncher = 0;
+
+    Result = RegOpenKeyExW(HKEY_LOCAL_MACHINE, L"Software\\" FSP_FSCTL_PRODUCT_NAME,
+        0, KEY_READ | KEY_WOW64_32KEY, &RegKey);
+    if (ERROR_SUCCESS == Result)
+    {
+        Size = sizeof MountDoNotUseLauncher;
+        Result = RegGetValueW(RegKey, 0, L"MountDoNotUseLauncher",
+            RRF_RT_REG_DWORD, 0, &MountDoNotUseLauncher, &Size);
+        RegCloseKey(RegKey);
+    }
+
+    FspMountDoNotUseLauncher = !!MountDoNotUseLauncher;
+}
 
 static BOOL WINAPI FspMountInitialize(
     PINIT_ONCE InitOnce, PVOID Parameter, PVOID *Context)
@@ -49,6 +72,8 @@ static BOOL WINAPI FspMountInitialize(
         }
     }
 
+    FspMountInitializeFromRegistry();
+
     return TRUE;
 }
 
@@ -366,7 +391,7 @@ static NTSTATUS FspMountSet_Drive(PWSTR VolumeName, PWSTR MountPoint, PHANDLE PM
 
     Result = FspServiceContextCheck(0, &IsLocalSystem);
     IsServiceContext = NT_SUCCESS(Result) && !IsLocalSystem;
-    if (IsServiceContext)
+    if (IsServiceContext && !FspMountDoNotUseLauncher)
     {
         /*
          * If the current process is in the service context but not LocalSystem,

src/dll/np.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/np.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/ntstatus.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/ntstatus.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/path.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/path.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/security.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/security.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/service.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/service.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/util.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/util.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dll/version.rc

@@ -23,9 +23,9 @@ BEGIN
             VALUE "CompanyName", STR(MyCompanyName)
             VALUE "FileDescription", STR(MyDescription)
             VALUE "FileVersion", STR(MyFullVersion)
-            VALUE "InternalName", "winfsp.dll"
+            VALUE "InternalName", STR(MyProductFileName) ".dll"
             VALUE "LegalCopyright", STR(MyCopyright)
-            VALUE "OriginalFilename", "winfsp.dll"
+            VALUE "OriginalFilename", STR(MyProductFileName) ".dll"
             VALUE "ProductName", STR(MyProductName)
             VALUE "ProductVersion", STR(MyProductVersion)
         END

src/dll/wksid.c

@@ -1,7 +1,7 @@
 /**
  * @file dll/wksid.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/dotnet/FileSystemBase+Const.cs

@@ -1,7 +1,7 @@
 /*
  * dotnet/FileSystemBase+Const.cs
  *
- * Copyright 2015-2020 Bill Zissimopoulos
+ * Copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -57,6 +57,14 @@ namespace Fsp
         public const UInt32 CleanupSetLastWriteTime = 0x40;
         public const UInt32 CleanupSetChangeTime = 0x80;
 
+        /* Disposition */
+        public const UInt32 FILE_DISPOSITION_DO_NOT_DELETE = 0x00000000;
+        public const UInt32 FILE_DISPOSITION_DELETE = 0x00000001;
+        public const UInt32 FILE_DISPOSITION_POSIX_SEMANTICS = 0x00000002;
+        public const UInt32 FILE_DISPOSITION_FORCE_IMAGE_SECTION_CHECK = 0x00000004;
+        public const UInt32 FILE_DISPOSITION_ON_CLOSE = 0x00000008;
+        public const UInt32 FILE_DISPOSITION_IGNORE_READONLY_ATTRIBUTE = 0x00000010;
+
         /* NTSTATUS */
         public const Int32 STATUS_SUCCESS = unchecked((Int32)0x00000000);
         public const Int32 STATUS_WAIT_1 = unchecked((Int32)0x00000001);

src/dotnet/FileSystemBase.cs

@@ -1,7 +1,7 @@
 /*
  * dotnet/FileSystemBase.cs
  *
- * Copyright 2015-2020 Bill Zissimopoulos
+ * Copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -289,6 +289,9 @@ namespace Fsp
         /// </summary>
         /// <remarks>
         /// <para>
+        /// (NOTE: use of this function with the CleanupDelete flag is not recommended;
+        /// use Delete instead.)
+        /// </para><para>
         /// When CreateFile is used to open or create a file the kernel creates a kernel mode file
         /// object (type FILE_OBJECT) and a handle for it, which it returns to user-mode. The handle may
         /// be duplicated (using DuplicateHandle), but all duplicate handles always refer to the same
@@ -342,6 +345,7 @@ namespace Fsp
         /// </param>
         /// <seealso cref="CanDelete"/>
         /// <seealso cref="SetDelete"/>
+        /// <seealso cref="Delete"/>
         /// <seealso cref="Close"/>
         public virtual void Cleanup(
             Object FileNode,
@@ -598,12 +602,14 @@ namespace Fsp
         /// </summary>
         /// <remarks>
         /// <para>
+        /// (NOTE: use of this function is not recommended; use Delete instead.)
+        /// </para><para>
         /// This function tests whether a file or directory can be safely deleted. This function does
         /// not need to perform access checks, but may performs tasks such as check for empty
         /// directories, etc.
         /// </para><para>
         /// This function should <b>NEVER</b> delete the file or directory in question. Deletion should
-        /// happen during Cleanup with the FspCleanupDelete flag set.
+        /// happen during Cleanup with the CleanupDelete flag set.
         /// </para><para>
         /// This function gets called when Win32 API's such as DeleteFile or RemoveDirectory are used.
         /// It does not get called when a file or directory is opened with FILE_DELETE_ON_CLOSE.
@@ -624,6 +630,7 @@ namespace Fsp
         /// <returns>STATUS_SUCCESS or error code.</returns>
         /// <seealso cref="Cleanup"/>
         /// <seealso cref="SetDelete"/>
+        /// <seealso cref="Delete"/>
         public virtual Int32 CanDelete(
             Object FileNode,
             Object FileDesc,
@@ -1036,12 +1043,14 @@ namespace Fsp
         /// </summary>
         /// <remarks>
         /// <para>
+        /// (NOTE: use of this function is not recommended; use Delete instead.)
+        /// </para><para>
         /// This function sets a flag to indicates whether the FSD file should delete a file
         /// when it is closed. This function does not need to perform access checks, but may
         /// performs tasks such as check for empty directories, etc.
         /// </para><para>
         /// This function should <b>NEVER</b> delete the file or directory in question. Deletion should
-        /// happen during Cleanup with the FspCleanupDelete flag set.
+        /// happen during Cleanup with the CleanupDelete flag set.
         /// </para><para>
         /// This function gets called when Win32 API's such as DeleteFile or RemoveDirectory are used.
         /// It does not get called when a file or directory is opened with FILE_DELETE_ON_CLOSE.
@@ -1067,6 +1076,7 @@ namespace Fsp
         /// <returns>STATUS_SUCCESS or error code.</returns>
         /// <seealso cref="Cleanup"/>
         /// <seealso cref="CanDelete"/>
+        /// <seealso cref="Delete"/>
         public virtual Int32 SetDelete(
             Object FileNode,
             Object FileDesc,
@@ -1188,6 +1198,85 @@ namespace Fsp
         {
             return STATUS_INVALID_DEVICE_REQUEST;
         }
+        /// <summary>
+        /// Sets the file delete flag or deletes a file or directory.
+        /// </summary>
+        /// <remarks>
+        /// <para>
+        /// This function replaces CanDelete, SetDelete and uses of Cleanup with the CleanupDelete flag
+        /// and is recommended for use in all new code.
+        /// </para><para>
+        /// Due to the complexity of file deletion in the Windows file system this function is used
+        /// in many scenarios. Its usage is controlled by the Flags parameter:
+        /// <list>
+        /// <item>FILE_DISPOSITION_DO_NOT_DELETE: Unmark the file for deletion.
+        /// Do <b>NOT</b> delete the file either now or at Cleanup time.</item>
+        /// <item>FILE_DISPOSITION_DELETE: Mark the file for deletion,
+        /// but do <b>NOT</b> delete the file. The file will be deleted at Cleanup time
+        /// (via a call to Delete with Flags = -1).
+        /// This function does not need to perform access checks, but may
+        /// performs tasks such as check for empty directories, etc.</item>
+        /// <item>FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS: Delete the file
+        /// <b>NOW</b> using POSIX semantics. Open user mode handles to the file remain valid.
+        /// This case will be received only when SupportsPosixUnlinkRename is set.</item>
+        /// <item>-1: Delete the file <b>NOW</b> using regular Windows semantics.
+        /// Called during Cleanup with no open user mode handles remaining.
+        /// If a file system implements Delete, Cleanup should <b>NOT</b> be used for deletion anymore.</item>
+        /// </list>
+        /// </para><para>
+        /// This function gets called in all file deletion scenarios:
+        /// <list>
+        /// <item>When the DeleteFile or RemoveDirectory API's are used.</item>
+        /// <item>When the SetInformationByHandle API with FileDispositionInfo or FileDispositionInfoEx is used.</item>
+        /// <item>When a file is opened using FILE_DELETE_ON_CLOSE.</item>
+        /// <item>Etc.</item>
+        /// </list>
+        /// </para><para>
+        /// NOTE: Delete takes precedence over CanDelete, SetDelete and Cleanup with the CleanupDelete flag.
+        /// This means that if Delete is defined, CanDelete and SetDelete will never be called and
+        /// Cleanup will never be called with the CleanupDelete flag.
+        /// </para>
+        /// </remarks>
+        /// <param name="FileNode">
+        /// The file node of the file or directory.
+        /// </param>
+        /// <param name="FileDesc">
+        /// The file descriptor of the file or directory.
+        /// </param>
+        /// <param name="FileName">
+        /// The name of the file or directory.
+        /// </param>
+        /// <param name="Flags">
+        /// File disposition flags.
+        /// </param>
+        /// <returns>STATUS_SUCCESS or error code.</returns>
+        /// <seealso cref="Cleanup"/>
+        /// <seealso cref="CanDelete"/>
+        /// <seealso cref="SetDelete"/>
+        public virtual Int32 Delete(
+            Object FileNode,
+            Object FileDesc,
+            String FileName,
+            UInt32 Flags)
+        {
+            switch (Flags)
+            {
+            case FILE_DISPOSITION_DO_NOT_DELETE:
+                return SetDelete(FileNode, FileDesc, FileName, false);
+
+            case FILE_DISPOSITION_DELETE:
+                return SetDelete(FileNode, FileDesc, FileName, true);
+
+            case FILE_DISPOSITION_DELETE | FILE_DISPOSITION_POSIX_SEMANTICS:
+                return STATUS_INVALID_PARAMETER;
+
+            case ~(UInt32)0:
+                return STATUS_NOT_IMPLEMENTED;
+
+            default:
+                return STATUS_INVALID_PARAMETER;
+            }
+        }
 
         /* helpers */
         /// <summary>

src/dotnet/FileSystemHost.cs

@@ -1,7 +1,7 @@
 /*
  * dotnet/FileSystemHost.cs
  *
- * Copyright 2015-2020 Bill Zissimopoulos
+ * Copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -312,6 +312,11 @@ namespace Fsp
             get { return 0 != (_VolumeParams.Flags & VolumeParams.RejectIrpPriorToTransact0); }
             set { _VolumeParams.Flags |= (value ? VolumeParams.RejectIrpPriorToTransact0 : 0); }
         }
+        public Boolean SupportsPosixUnlinkRename
+        {
+            get { return 0 != (_VolumeParams.Flags & VolumeParams.SupportsPosixUnlinkRename); }
+            set { _VolumeParams.Flags |= (value ? VolumeParams.SupportsPosixUnlinkRename : 0); }
+        }
         /// <summary>
         /// Gets or sets the prefix for a network file system.
         /// </summary>
@@ -342,7 +347,7 @@ namespace Fsp
         public Int32 Preflight(String MountPoint)
         {
             return Api.FspFileSystemPreflight(
-                _VolumeParams.IsPrefixEmpty() ? "WinFsp.Disk" : "WinFsp.Net",
+                _VolumeParams.IsPrefixEmpty() ? Api.ProductName + ".Disk" : Api.ProductName + ".Net",
                 MountPoint);
         }
         /// <summary>
@@ -416,7 +421,7 @@ namespace Fsp
             if (0 > Result)
                 return Result;
             Result = Api.FspFileSystemCreate(
-                _VolumeParams.IsPrefixEmpty() ? "WinFsp.Disk" : "WinFsp.Net",
+                _VolumeParams.IsPrefixEmpty() ? Api.ProductName + ".Disk" : Api.ProductName + ".Net",
                 ref _VolumeParams, _FileSystemInterfacePtr, out _FileSystemPtr);
             if (0 > Result)
                 return Result;
@@ -1343,28 +1348,6 @@ namespace Fsp
                 return ExceptionHandler(FileSystem, ex);
             }
         }
-        private static Int32 SetDelete(
-            IntPtr FileSystemPtr,
-            ref FullContext FullContext,
-            String FileName,
-            Boolean DeleteFile)
-        {
-            FileSystemBase FileSystem = (FileSystemBase)Api.GetUserContext(FileSystemPtr);
-            try
-            {
-                Object FileNode, FileDesc;
-                Api.GetFullContext(ref FullContext, out FileNode, out FileDesc);
-                return FileSystem.SetDelete(
-                    FileNode,
-                    FileDesc,
-                    FileName,
-                    DeleteFile);
-            }
-            catch (Exception ex)
-            {
-                return ExceptionHandler(FileSystem, ex);
-            }
-        }
         private static Int32 GetEa(
             IntPtr FileSystemPtr,
             ref FullContext FullContext,
@@ -1415,6 +1398,28 @@ namespace Fsp
                 return ExceptionHandler(FileSystem, ex);
             }
         }
+        private static Int32 Delete(
+            IntPtr FileSystemPtr,
+            ref FullContext FullContext,
+            String FileName,
+            UInt32 Flags)
+        {
+            FileSystemBase FileSystem = (FileSystemBase)Api.GetUserContext(FileSystemPtr);
+            try
+            {
+                Object FileNode, FileDesc;
+                Api.GetFullContext(ref FullContext, out FileNode, out FileDesc);
+                return FileSystem.Delete(
+                    FileNode,
+                    FileDesc,
+                    FileName,
+                    Flags);
+            }
+            catch (Exception ex)
+            {
+                return ExceptionHandler(FileSystem, ex);
+            }
+        }
 
         static FileSystemHost()
         {
@@ -1443,11 +1448,14 @@ namespace Fsp
             _FileSystemInterface.GetStreamInfo = GetStreamInfo;
             _FileSystemInterface.GetDirInfoByName = GetDirInfoByName;
             _FileSystemInterface.Control = Control;
-            _FileSystemInterface.SetDelete = SetDelete;
             _FileSystemInterface.GetEa = GetEa;
             _FileSystemInterface.SetEa = SetEa;
+            _FileSystemInterface.Delete = Delete;
 
             _FileSystemInterfacePtr = Marshal.AllocHGlobal(FileSystemInterface.Size);
+            /* Marshal.AllocHGlobal does not zero memory; we must do it ourselves! */
+            for (int Offset = 0; FileSystemInterface.Size > Offset; Offset += IntPtr.Size)
+                Marshal.WriteIntPtr(_FileSystemInterfacePtr, Offset, IntPtr.Zero);
             Marshal.StructureToPtr(_FileSystemInterface, _FileSystemInterfacePtr, false);
         }
 

src/dotnet/Interop.cs

@@ -1,7 +1,7 @@
 /*
  * dotnet/Interop.cs
  *
- * Copyright 2015-2020 Bill Zissimopoulos
+ * Copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -55,6 +55,7 @@ namespace Fsp.Interop
         internal const UInt32 CasePreservedExtendedAttributes = 0x02000000;
         internal const UInt32 WslFeatures = 0x04000000;
         internal const UInt32 RejectIrpPriorToTransact0 = 0x10000000;
+        internal const UInt32 SupportsPosixUnlinkRename = 0x20000000;
         internal const int PrefixSize = 192;
         internal const int FileSystemNameSize = 16;
 
@@ -741,6 +742,12 @@ namespace Fsp.Interop
                 IntPtr Ea,
                 UInt32 EaLength,
                 out FileInfo FileInfo);
+            [UnmanagedFunctionPointer(CallingConvention.Cdecl)]
+            internal delegate Int32 Delete(
+                IntPtr FileSystem,
+                ref FullContext FullContext,
+                [MarshalAs(UnmanagedType.LPWStr)] String FileName,
+                UInt32 Flags);
         }
 
         internal static int Size = IntPtr.Size * 64;
@@ -776,7 +783,8 @@ namespace Fsp.Interop
         internal Proto.OverwriteEx OverwriteEx;
         internal Proto.GetEa GetEa;
         internal Proto.SetEa SetEa;
-        /* NTSTATUS (*Reserved[33])(); */
+        internal Proto.Delete Delete;
+        /* NTSTATUS (*Reserved[32])(); */
     }
 
     [SuppressUnmanagedCodeSecurity]
@@ -1425,13 +1433,17 @@ namespace Fsp.Interop
         }
 
         /* initialization */
+        internal static String ProductName = "WinFsp";
+        internal static String ProductFileName = "winfsp";
         private static IntPtr LoadDll()
         {
             String DllPath = null;
-            String DllName = 8 == IntPtr.Size ? "winfsp-x64.dll" : "winfsp-x86.dll";
+            String DllName = 8 == IntPtr.Size ?
+                ProductFileName + "-x64.dll" :
+                ProductFileName + "-x86.dll";
             String KeyName = 8 == IntPtr.Size ?
-                "HKEY_LOCAL_MACHINE\\SOFTWARE\\WOW6432Node\\WinFsp" :
-                "HKEY_LOCAL_MACHINE\\Software\\WinFsp";
+                "HKEY_LOCAL_MACHINE\\SOFTWARE\\WOW6432Node\\" + ProductName :
+                "HKEY_LOCAL_MACHINE\\Software\\" + ProductName;
             IntPtr Module;
             Module = LoadLibraryW(DllName);
             if (IntPtr.Zero == Module)
@@ -1525,6 +1537,15 @@ namespace Fsp.Interop
             if (Debugger.IsAttached)
                 Debugger.Break();
 #endif
+            object[] attributes = Assembly.GetExecutingAssembly().GetCustomAttributes(
+                typeof(AssemblyProductAttribute), false);
+            if (null != attributes &&
+                0 < attributes.Length &&
+                null != attributes[0] as AssemblyProductAttribute)
+            {
+                ProductName = (attributes[0] as AssemblyProductAttribute).Product;
+                ProductFileName = ProductName.ToLowerInvariant();
+            }
             LoadProto(LoadDll());
             CheckVersion();
         }

src/dotnet/Service.cs

@@ -1,7 +1,7 @@
 /*
  * dotnet/Service.cs
  *
- * Copyright 2015-2020 Bill Zissimopoulos
+ * Copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/fsptool/fsptool.c

@@ -1,7 +1,7 @@
 /**
  * @file fsptool/fsptool.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/launcher/launchctl.c

@@ -1,7 +1,7 @@
 /**
  * @file launcher/launchctl.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/launcher/launcher.c

@@ -1,7 +1,7 @@
 /**
  * @file launcher/launcher.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -25,7 +25,7 @@
 #include <sddl.h>
 #include <userenv.h>
 
-#define PROGNAME                        "WinFsp.Launcher"
+#define PROGNAME                        FSP_FSCTL_PRODUCT_NAME ".Launcher"
 
 static NTSTATUS (NTAPI *SvcNtOpenSymbolicLinkObject)(
     PHANDLE LinkHandle,
@@ -1321,7 +1321,7 @@ exit:
         SvcInstance->StdioHandles[2] = INVALID_HANDLE_VALUE;
     }
 
-    if (NT_SUCCESS(Result))
+    if (NT_SUCCESS(Result) && STATUS_TIMEOUT != Result)
     {
         SvcInstance->Argc = Argc;
         SvcInstance->Argv = Argv;

src/launcher/ptrans.c

@@ -1,7 +1,7 @@
 /**
  * @file launcher/ptrans.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/shared/ku/config.h

@@ -4,7 +4,7 @@
  * Shared kernel/user configuration. This file is to be included by the
  * FSD and DLL components ONLY!
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/shared/ku/library.h

@@ -1,7 +1,7 @@
 /**
  * @file shared/ku/library.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/shared/ku/posix.c

@@ -14,7 +14,7 @@
  * [SNAME]
  *     https://www.cygwin.com/cygwin-ug-net/using-specialnames.html
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.
@@ -181,7 +181,7 @@ static VOID FspPosixInitializeFromRegistry(VOID)
 
     DistinctPermsForSameOwnerGroup = 0;
 
-    Result = RegOpenKeyExW(HKEY_LOCAL_MACHINE, L"Software\\WinFsp",
+    Result = RegOpenKeyExW(HKEY_LOCAL_MACHINE, L"Software\\" FSP_FSCTL_PRODUCT_NAME,
         0, KEY_READ | KEY_WOW64_32KEY, &RegKey);
     if (ERROR_SUCCESS == Result)
     {

src/shared/ku/uuid5.c

@@ -1,7 +1,7 @@
 /**
  * @file shared/ku/uuid5.c
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.

src/shared/um/minimal.h

@@ -1,7 +1,7 @@
 /**
  * @file shared/um/minimal.h
  *
- * @copyright 2015-2020 Bill Zissimopoulos
+ * @copyright 2015-2021 Bill Zissimopoulos
  */
 /*
  * This file is part of WinFsp.